ASTM F1359/F1359M-16
假人淋浴喷洒条件下防护服或者防护套装抗液体渗透性的标准试验方法

Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin

被代替

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM F1359/F1359M-16 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

标准号

ASTM F1359/F1359M-16

发布

2016年

发布单位

美国材料与试验协会

替代标准

ASTM F1359/F1359M-16a

当前最新

ASTM F1359/F1359M-22

 

 

适用范围

5.1 This test method evaluates the ability of the construction and configuration of protective clothing or protective ensembles to resist liquid penetration. In most cases, the conditions used in this test method will not represent actual end-use conditions.

5.2 Two different spray configurations are used for exposing the protective clothing or protective ensemble on a manikin.

5.2.1 Procedure A involves five shower nozzles with one nozzle directly above the clothed manikin and two nozzles each to upper and lower sides of the manikin that are all positioned in the same vertical plane. This spray configuration is intended to provide a full exposure of the entire protective clothing or protective ensemble system.

5.2.2 Procedure B involves three shower nozzles that are positioned at different heights on a vertical line that is parallel to the manikin with the locations and direction of each nozzle set with respect to targets on the manikin. This spray configuration is intended to provide a direct assessment of garment features such as the front closure.

5.3 The selected duration of the test is not intended to simulate user exposure to splashes of liquid substances but rather to provide sufficient time for enough liquid to penetrate to make visual detection easier. The default liquid exposure time for Procedure A is 20 min. The default liquid exposure time for Procedure B is 10 min.

5.3.1 It is permissible to specify shorter test durations. It is recommended that the duration of exposure be the same in each manikin orientation.

5.3.2 The choice of different test duration is partly based on the number of layers in the specimen being tested, some of which serve to absorb the surfactant-treated test liquid and result in attenuating the severity of the liquid challenge to the specimen.

5.4 A nontoxic, non-foaming surfactant is added to water for this test method to simulate liquids of lower surface tensions. Liquids of specific interest can be simulated by treating water to achieve an equivalent surface tension.

5.5 For protective clothing with water-repellent surfaces, the lower surface tension liquid will aid in the evaluation of the construction and configuration of the garment because it is less likely to be repelled and more likely to wet the protective clothing. This is especially useful for reusable garments whose water-repellent surface interferes with the evaluation of their construction and configuration when new, but is diminished after wearing and washing.

5.6 Fluorescent or colored dyes are permitted to be added to the water to enhance detection of liquid penetration into the protective clothing or protective ensemble.

5.7 This test method can be used by both manufacturers and end users to assess liquid penetration resistance. Manufacturers can use this test method to evaluate quality of constructio......

儿童 2019-nCoV 病毒感染/肺炎的诊断与防治建议

有条件情况下先行容量状况评估或容量反应性试验，根据评估结果行容量复苏；若无条件评估时可先予生理盐水２0ml/kg，如果休克不改善或加重，应尽早使用心血管活性药物。若存在 ARDS，应在保证组织灌注前提下，严格液体管理，维持液体负平衡，并积极治疗毛细血管渗漏和维护心肾功能。抗休克治疗期间需密切监测血流动力学。　　...

实验员是高危职业，看了这个你就知道

会在60－70度时蒸发（所以最好不要在胶太热的时候加，或者应该加到液体 里，0.5ug/ml，染色半小时）（当EB加得过多时，也可以在室温用水将已染色的凝胶浸泡20min以降低未结合的EB引起的背景荧光）。溴化乙锭溶液的净化处理：由于溴化乙锭具有一定的毒性，实验结束后，应对含EB的溶液进行净化处理再行弃置，以避免污染环境和危害人体健康。...