5.1x00a0;The test results are indicative of fuel performance during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface that is at a specified temperature.
1.1x00a0;This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system.
1.2x00a0;The differential pressure values in mm Hg are defined only in terms of this test method.
1.3x00a0;The deposition values stated in SI units shall be regarded as the referee value.
1.4x00a0;The pressure values stated in SI units are to be regarded as standard. The psi comparison is included for operational safety with certain older instruments that cannot report pressure in SI units.
1.5x00a0;No other units of measurement are included in this standard.
1.6x00a0;WARNINGx2014;Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPAx2019;s websitex2014;http://www.epa.gov/mercury/faq.htmx2014;for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.
1.7x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1.1, 7.2, 7.2.1, 7.3, 11.1.1, and Annex A5.
ASTM D3241-2016a由美国材料与试验协会 US-ASTM 发布于 2016。
ASTM D3241-2016a 在中国标准分类中归属于: E31 燃料油，在国际标准分类中归属于: 75.160.20 液体燃料。
非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM D3241-2016a 前三页，或者稍后再访问。
点击下载后，生成下载文件时间比较长，请耐心等待......
5.1x00a0;The test results are indicative of fuel performance during gas turbine operation and can be used to assess the level of deposits that form when liquid fuel contacts a heated surface that is at a specified temperature.
1.1x00a0;This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system.
1.2x00a0;The differential pressure values in mm Hg are defined only in terms of this test method.
1.3x00a0;The deposition values stated in SI units shall be regarded as the referee value.
1.4x00a0;The pressure values stated in SI units are to be regarded as standard. The psi comparison is included for operational safety with certain older instruments that cannot report pressure in SI units.
1.5x00a0;No other units of measurement are included in this standard.
1.6x00a0;WARNINGx2014;Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPAx2019;s websitex2014;http://www.epa.gov/mercury/faq.htmx2014;for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.
1.7x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1.1, 7.2, 7.2.1, 7.3, 11.1.1, and Annex A5.
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证：京ICP证110310号