5.1x00a0;The determination of the carbon number distribution of petroleum waxes and the normal and non-normal hydrocarbons in each can be used for control of production processes as well as a guide to performance in many end uses.
5.2x00a0;Data resulting from this test method are particularly useful in evaluating petroleum waxes for use in rubber formulations.
1.1x00a0;This test method covers the quantitative determination of the carbon number distribution of petroleum waxes in the range from n-C17 through n-C44 by gas chromatography using internal standardization. In addition, the content of normal and non-normal hydrocarbons for each carbon number is also determined. Material with a carbon number above n -C44 is determined by its difference from 1008201;% by mass and reported as C45+.
1.2x00a0;This test method is applicable to petroleum derived waxes, including blends of waxes. This test method is not applicable to oxygenated waxes, such as synthetic polyethylene glycols (for example, Carbowax2), or natural products such as beeswax or carnauba.
1.3x00a0;This test method is not directly applicable to waxes with oil content greater than 108201;% as determined by Test Method D721.
1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.6x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
噻吩是苯中一种常见的含硫杂质,新版GB/T3405-2011《石油苯》国家标准要求分析石油苯中噻吩含量,采用的方法包括ASTM D4735 和ASTMD1685,其中ASTM D4735 气相色谱法测定石油苯中的噻吩含量为仲裁方法,为保证检测结果的准确性,针对该方法我们开展技术实验【应用原理】版标准ASTM D4735-2009《苯中微量噻吩测定的标准试验方法(气相色谱法)》,要求使用配备了火焰光度检测器...
(体积分数)/% 车用汽油和航空汽油中苯和甲苯含量的测定(气相色谱法) SH/T 0713-2002 ASTM D3606-10汽油中芳烃含量测定法(气相色谱法)SH/T 0693-2000 12.芳烃液体石油产品烃类的测定荧光指示剂吸附法GB/T 11132-2008汽油中烃族组成的测定多维气相色谱法NB/SH/T 0741-2010 13.烯烃液体石油产品烃类的测定荧光指示剂吸附法GB/T 11132...
近日,由石科院起草制定的ASTM国际组织标准《中间馏分中芳烃、非芳烃和脂肪酸甲酯组分的分离和测定固相萃取和气相色谱法》由美国试验与材料协会国际组织正式批准发布(ASTM D8144-18),标志着我国石油产品试验方法国际标准制定工作取得新的突破。...
苯的检测方法主要依据以 下标准方法: ASTM D4492 气相色谱法检测精制苯 ASTM D2360单环芳烃中的杂质分析-气相色谱法 ASTM D2359 精制苯标准规范 GB/T 3405 石油苯 本实验采用Thermo Scientific 新型的Trace 1310 气相色谱仪,配合AS1310自动进样器,分析苯系物中微 量的芳香烃和非芳烃杂质,实验结果完全满足ASTM D 4492方法对杂质限量检测和重现性的要求...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号