DIN EN 14298-2018
锯材.干燥质量的评定;德文版本EN 14298-2017

Sawn timber - Assessment of drying quality; German version EN 14298:2017

DIN EN 14298-2018 发布历史

This European Standard defines a method of assessment of drying quality. It applies to a lot of dried sawn timber (surfaced or not). It applies to both softwood and hardwood with a thickness not greater than 100 mm. The quality of drying is expressed in terms of target and average moisture content of the lot as well as defining the moisture content variation between individual pieces expressed as allowable upper and lower limits. An option for specifying the degree of case-hardening is included. NOTE 1 Other features related to drying, e. g. checking, distortions, stain, etc., are specified in documents for visual grading of sawn timber or in product specifications and are not covered by this document. NOTE 2 In the following the term sawn timber is used for all dried timber covered by this the scope.

DIN EN 14298-2018由德国标准化学会 DE-DIN 发布于 2018-0101。

DIN EN 14298-2018 在中国标准分类中归属于: B69 木材加工材，在国际标准分类中归属于: 79.040 木材、原木和锯材。

DIN EN 14298-2018 发布之时，引用了标准

• EN 844-3-1995 圆木和锯木.术语.第3部分:与锯木有关的通用术语*， 1995-01-01 更新
• EN 844-4-1997 圆木和锯木.术语.第4部分:与含水量有关的术语*， 1997-03-01 更新
• EN 844-12-2000 圆木和锯木.术语.第12部分:附加术语和总索引*， 2022-07-30 更新
• EN 1438-1998 木材和木制品符号*， 1998-08-01 更新
• CEN/TS 12169-2008 批量锯材合格评定的标准*， 2008-01-01 更新
• EN 13183-1-2002 一块锯木材的含水量.第1部分:用烘干法测定.合并勘误表-2003年9月*， 2002-04-01 更新
• EN 13183-2-2002 一片锯材的含水量.第2部分:由电阻法估算.合并勘误表-2003年9月*， 2002-04-01 更新
• CEN/TS 14464-2010 锯材.表层硬化的评定方法*， 2010-07-01 更新

* 在 DIN EN 14298-2018 发布之后有更新，请注意新发布标准的变化。

DIN EN 14298-2018的历代版本如下：

• 2005年02月 DIN EN 14298-2005 锯材.干燥质量的评定
• 1970年01月 DIN EN 14298-2018 锯材.干燥质量的评定;德文版本EN 14298-2017

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 14298-2018 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 14298-2018

发布日期

1970年01月

实施日期

废止日期

无

中国标准分类号

B69

国际标准分类号

79.040

发布单位

DE-DIN

引用标准

EN 844-3-1995 EN 844-4-1997 EN 844-12-2000 EN 1438-1998 CEN/TS 12169-2008 EN 13183-1-2002 EN 13183-2-2002 CEN/TS 14464-2010

被代替标准

DIN EN 14298-2005 DIN EN 14298-2016

适用范围

This European Standard defines a method of assessment of drying quality. It applies to a lot of dried sawn timber (surfaced or not). It applies to both softwood and hardwood with a thickness not greater than 100 mm. The quality of drying is expressed in terms of target and average moisture content of the lot as well as defining the moisture content variation between individual pieces expressed as allowable upper and lower limits. An option for specifying the degree of case-hardening is included. NOTE 1 Other features related to drying, e. g. checking, distortions, stain, etc., are specified in documents for visual grading of sawn timber or in product specifications and are not covered by this document. NOTE 2 In the following the term sawn timber is used for all dried timber covered by this the scope.