IEC 60793-2-10-2015
光纤.第2-10部分:产品规范.A1类多模纤维用分规格

Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

IEC 60793-2-10-2015 发布历史

This part of IEC 60793 is applicable to optical fibre types A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Type A1a applies to 50/125 μm graded index fibre. Three bandwidth grades are defined as A1a.1, A1a.2 and A1a.3. Each of these bandwidth grades is defined for two levels of macrobend loss performance that are distinguished by "a" or "b" suffix. Those with suffix "a" are specified to meet traditional macrobend loss performance levels. Those with suffix "b" are specified to meet enhanced macrobend loss (i.e. lower loss) performance levels. Type A1b applies to 62,5/125 μm graded index fibre and A1d applies to 100/140 μm graded index fibre. Other applications include, but are not restricted to, the following: short reach, high bit-rate systems in telephony, distribution and local networks carrying data, voice and/or video services; on-premises intra-building and inter-building fibre installations including data centres, local area networks (LANs), storage area networks (SANs), private branch exchanges (PBXs), video, various multiplexing uses, outside telephone cable plant use, and miscellaneous related uses. Three types of requirements apply to these fibres: general requirements, as defined in IEC 60793-2; specific requirements common to the category A1 multimode fibres covered in this standard and which are given in Clause 3; particular requirements applicable to individual fibre types or specific applications, which are defined in the normative family specification annexes.

IEC 60793-2-10-2015由国际电工委员会 IX-IEC 发布于 2015-11。

IEC 60793-2-10-2015 在中国标准分类中归属于: M33 光通信设备，在国际标准分类中归属于: 33.180.10 光纤和光缆。

IEC 60793-2-10-2015 发布之时，引用了标准

• IEC 60793-1-1-2008 光纤.第1-1部分:测量方法和试验程序.总则和指南
• IEC 60793-1-20-2014 光纤 第1-20部分：测量方法和试验规程 纤维几何结构
• IEC 60793-1-21-2001 光纤 第1-21部分：测量方法和试验规程 被覆层几何结构
• IEC 60793-1-22-2001 光纤 第1-22部分：测量方法和试验规程 长度测量
• IEC 60793-1-30-2010 光纤.第1-30部分:测量方法和试验规程.纤维验证试验
• IEC 60793-1-31-2010 
• IEC 60793-1-32-2010 光纤.第1-32部分:测量方法和试验规程.涂层的可剥离性
• IEC 60793-1-33-2001 光纤 第1-33部分：测量方法和试验规程 应力腐蚀敏感度
• IEC 60793-1-34-2006 光学纤维.第1-34:部分:测量方法和试验程序.纤维卷曲
• IEC 60793-1-40-2001 光纤 第1-40部分：测量方法和试验规程 衰减
• IEC 60793-1-41-2010 Fibres optiques – Partie 1-41: Méthodes de mesure et procédures d'essai – Largeur de bande (Edition 3.0)
• IEC 60793-1-42-2013 Optical fibres – Part 1-42: Measurement methods and test procedures – Chromatic dispersion (Edition 3.0)

IEC 60793-2-10-2015的历代版本如下：

• 2002年03月01日 IEC 60793-2-10-2002 Fibres Optiques - Partie 2-10: Specifications De Produits - Specification Intermediaire Pour Les Fibres Multimodales De Categorie A1 (Edition 1.0)
• 2004年11月01日 IEC 60793-2-10-2004 Fibres optiques– Partie 2-10: Spécifications de produits – Spécification intermédiaire pour les fibres multimodales de catégorie A1 (Edition 2.0)
• 2007年06月 IEC 60793-2-10-2007 光纤.第2-10部分:产品规范.A1类多模纤维用分规范
• 2011年03月 IEC 60793-2-10-2011 光纤.第2-10部分:产品规范.A1类多模纤维用分规格
• 2015年11月 IEC 60793-2-10-2015 光纤.第2-10部分:产品规范.A1类多模纤维用分规格
• 2017年08月01日 IEC 60793-2-10-2017 Optical fibres – Part 2-10: Product specifications – Sectional specification for category A1 multimode fibres (Edition 6.0)
• 2019年05月22日 IEC 60793-2-10-2019 光纤第2-10部分:产品规格 - 类别a1多模光纤的分规范
• 2022年01月27日 IEC 60793-2-10-2019/AMD1-2022 修改件1.光纤.第2-10部分:产品规范.A1类多模光纤分规范

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 60793-2-10-2015 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 60793-2-10-2015

发布日期

2015年11月

实施日期

废止日期

无

中国标准分类号

M33

国际标准分类号

33.180.10

发布单位

国际电工委员会

引用标准

IEC 60793-1-1-2008 IEC 60793-1-20-2014 IEC 60793-1-21-2001 IEC 60793-1-22-2001 IEC 60793-1-30-2010 IEC 60793-1-31-2010 IEC 60793-1-32-2010 IEC 60793-1-33-2001 IEC 60793-1-34-2006 IEC 60793-1-40-2001 IEC 60793-1-41-2010 IEC 60793-1-42-2013 IEC 60793-1-43-2

被代替标准

IEC 86A/1631/CDV-2014 IEC 60793-2-10-2011

适用范围

This part of IEC 60793 is applicable to optical fibre types A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Type A1a applies to 50/125 μm graded index fibre. Three bandwidth grades are defined as A1a.1, A1a.2 and A1a.3. Each of these bandwidth grades is defined for two levels of macrobend loss performance that are distinguished by "a" or "b" suffix. Those with suffix "a" are specified to meet traditional macrobend loss performance levels. Those with suffix "b" are specified to meet enhanced macrobend loss (i.e. lower loss) performance levels. Type A1b applies to 62,5/125 μm graded index fibre and A1d applies to 100/140 μm graded index fibre. Other applications include, but are not restricted to, the following: short reach, high bit-rate systems in telephony, distribution and local networks carrying data, voice and/or video services; on-premises intra-building and inter-building fibre installations including data centres, local area networks (LANs), storage area networks (SANs), private branch exchanges (PBXs), video, various multiplexing uses, outside telephone cable plant use, and miscellaneous related uses. Three types of requirements apply to these fibres: general requirements, as defined in IEC 60793-2; specific requirements common to the category A1 multimode fibres covered in this standard and which are given in Clause 3; particular requirements applicable to individual fibre types or specific applications, which are defined in the normative family specification annexes.

IEC 60793-2-10-2015系列标准

谁引用了IEC 60793-2-10-2015 更多引用