ASTM B762-90(2016)
金属和无机涂层变量抽样的标准试验方法

Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

被代替

标准号

ASTM B762-90(2016)

发布

1990年

发布单位

美国材料与试验协会

替代标准

ASTM B762-21

当前最新

ASTM B762-21

 

 

引用标准

ASTM B602 ASTM B697 MIL-STD-105 MIL-STD-414

适用范围

5.1 Sampling inspection permits the estimation of the overall quality of a group of product articles through the inspection of a relatively small number of product articles drawn from the group.

5.2 The specification of a sampling plan provides purchasers and sellers a means of identifying the minimum quality level that is considered to be satisfactory.

5.3 Because sampling plans yield estimates of the quality of a product, the results of the inspection are subject to error. Through the selection of a sampling plan, the potential error is known and controlled.

5.4 Sampling inspection is used when a decision must be made about what to do with a quantity of articles. This quantity may be a shipment from a supplier, articles that are ready for a subsequent manufacturing operation, or articles ready for shipment to a customer.

5.5 In sampling inspection, a relatively small number of articles (the sample) is selected randomly from a larger number of articles (the inspection lot); the sample is inspected for conformance to the requirements placed on the articles. Based on the results, a decision is made whether or not the lot conforms to the requirements.

5.6 Since only a portion of a production lot is inspected, the quality of the uninspected articles is not known. The possibility exists that some of the uninspected articles are nonconforming. Therefore, basic to any sampling inspection plan is the willingness of the buyer to accept lots that contain some nonconforming articles. The number of nonconforming articles in accepted lots is controlled by the size of the sample and the criteria of acceptance that are placed on the sample.

5.7 Acceptance sampling plans are used for the following reasons:

5.7.1 When the cost of inspection is high and the consequences of accepting a nonconforming article are not serious.

5.7.2 When 1008201;% inspection is fatiguing and boring and, therefore, likely to result in errors.

5.7.3 When inspection requires a destructive test, sampling inspection must be used.

5.8 In acceptance sampling by variables, the coating characteristic of each article in the sample is measured. Using the arithmetic mean of these values, the standard deviation of the process, and the factor k that is found in the Tables, a number is calculated (see 9.3). If this number equals or exceeds the specified minimum, the inspection lot conforms to the requirements. If it is less, the lot does not conform. If the standard deviation of the process is not known, the standard deviation of the sample is calculated and used.

5.9 The use of a sampling plan involves the balancing of the costs of ......

热膨胀仪是用在哪些行业或是领域

可测量固体、熔融金属、粉末、涂料等各类样品，广泛应用于无机陶瓷、涂层材料、塑料聚合物、金属材料、建筑材料、耐火材料、复合材料等。...

市场监管总局公布一产品质量国抽实施细则

3 判定规则3.1 依据标准GB 4806.7—2016食品安全国家标准 食品接触用塑料材料及制品GB 4806.8—2016食品安全国家标准 食品接触用纸和纸板材料及制品GB 4806.8—2022食品安全国家标准 食品接触用纸和纸板材料及制品GB 4806.9—2016食品安全国家标准 食品接触用金属材料及制品GB 4806.10—2016食品安全国家标准 食品接触用涂料及涂层现行有效的企业标准...