GB/T 18110-2000
Electromechanical equipment guide for small hydroelectric installations (English Version)
- Standard No.
- GB/T 18110-2000
- Language
- Chinese, Available in English version
- Release Date
- 2000
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2017-01
- Replace By
- GB/T 18110-2016
- Latest
- GB/T 18110-2016
- Scope
- This standard specifies the installation and operating conditions of power stations, the technical conditions and requirements for inspection, delivery, operation and maintenance of electromechanical equipment in small hydropower stations. This standard is applicable to impact type and mixed flow turbine generator sets with unit power below 10MW and runner diameters of 1m and below, as well as axial flow and tubular turbine generator sets with runner diameters of 3.3m and below. This standard concerns only the direct relationship between the purchaser and the supplier, and does not involve civil engineering, administrative affairs or commerce. This standard is entirely based on actual data, and its purpose is to provide the required information to the purchaser to help the purchaser do the following work: ——Preparation for bidding; ——Evaluation of tender documents; ——Cooperating with equipment during design and manufacture - Supplier consultation; - Quality control in the manufacturing process and in-plant laboratory; - On-site installation supervision; - Trial operation; - Acceptance test; - Operation and maintenance. This standard includes: a) General requirements for electromechanical equipment of small hydropower stations; b) Technical requirements for electromechanical equipment (excluding dimensions and standardization); c) Requirements for acceptance, operation and maintenance. The documentation should be as simple as possible considering the type of equipment, but the special operating conditions must be adequately defined. Excessive technical requirements are not good for the economy of the project. This standard does not involve the stage of preliminary scientific research and feasibility study, nor does it involve economic research related to energy. This standard cannot replace the necessary engineering research on equipment type selection, design, manufacture, installation and testing. Its purpose is to let the purchaser know the key points and information that should be provided, explained and considered in the construction of small hydropower stations.
GB/T 18110-2000 history
- 2016 GB/T 18110-2016 Electromechanical equipment guide for small hydroelectric installations
- 2000 GB/T 18110-2000 Electromechanical equipment guide for small hydroelectric installations