GB/T 8190.8-2003
Reciprocating internal combustion engines--Exhaust emission measurement--Part 8: Engine group determination (English Version)
- Standard No.
- GB/T 8190.8-2003
- Language
- Chinese, Available in English version
- Release Date
- 2003
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2019-07
- Replace By
- GB/T 8190.8-2018
- Latest
- GB/T 8190.8-2018
- Scope
- This standard specifies general requirements for the design and manufacture of protective devices primarily intended to protect persons from mechanical hazards. This standard is mainly applicable to machines manufactured after the release of this standard. Care should be taken to use guards to minimize non-mechanical hazards. The requirements of this standard apply to both fixed and movable guards. This standard does not apply to those parts of the actuating interlock in the guard. The interlocking device is specified by GB/T l8831. This standard does not address requirements for specialized systems capable of moving and lifting materials, such as rollover protective structures (ROPS) and falling object protective structures (FOPS).
GB/T 8190.8-2003 history
- 2018 GB/T 8190.8-2018 Reciprocating internal combustion engines—Exhaust emission measurement—Part 8：Engine group determination
- 2003 GB/T 8190.8-2003 Reciprocating internal combustion engines--Exhaust emission measurement--Part 8: Engine group determination
GB/T 8190.8-2003 -All Parts
GB/T 8190.1-2023 Emission measurement of reciprocating internal combustion engines - Part 1: Test bench measurement systems for gaseous and particulate emissions
GB/T 8190.10-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 10:Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GB/T 8190.11-2009 Reciprocating internal combustion engines-Exhaust emission measurement-Part11:Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GB/T 8190.2-2011 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site
GB/T 8190.3-2003 Reciprocating internal combustion engines--Exhaust emission measurement--Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
GB/T 8190.4-2023 Measurement of emissions from reciprocating internal combustion engines - Part 4: Steady-state and transient test cycles for engines of different uses
GB/T 8190.5-2019 Reciprocating internal combustion engines—Exhaust emission measurement—Part 5：Test fuels
GB/T 8190.6-2022 Reciprocating internal combustion engines—Exhaust emission measurement—Part 6: Report of measuring results and test
GB/T 8190.7-2018 Reciprocating internal combustion engines—Exhaust emission measurement—Part 7：Engine family determination
GB/T 8190.8-2018 Reciprocating internal combustion engines—Exhaust emission measurement—Part 8：Engine group determination
GB/T 8190.9-2017 Reciprocating internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions