GB/T 18209.3-2010
Electrical safety of machinery.Indication, marking and actuation.Part 3: Requirements for the location and operation of actuators

Standard No.

GB/T 18209.3-2010

Language

Chinese

Release Date

2011

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Lastest

GB/T 18209.3-2010

Replace By

EEMUA PUB NO 183-2011

Replace

GB 18209.3-2002

Scope

This Part specifies the relevant safety requirements for manipulators operated by hand or other parts of the human body at the man-machine interface. This standard specifies the following general requirements: - the general orientation of the movement of the actuator; - the arrangement of one actuator relative to the other; - the correlation between the action and its final effect. This part is based on IEC 60477, but is also applicable to non-electrotechnical processes, such as machinery and fluid power systems. This section applies to a single actuator or a group of actuators that form part of a building block.

GB/T 18209.3-2010 Referenced Document

• GB/T 15706.2-2007 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
• IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
• IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
• IEC 61310-1 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
• IEC 61310-2 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
• ISO 13851:2002 Safety of machinery - Two-hand control devices - Functional aspects and design principles
• ISO 1503:1977 Geometrical orientation and directions of movements
• ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators - Part 2: Displays

GB/T 18209.3-2010 history

• 2011 GB 18209.3-2010 Electrical safety of machinery.Indication, marking and actuation.Part 3: Requirements for the location and operation of actuators
• 2002 GB 18209.3-2002 Safety of machinery-Indication,marking and actuation--Part 3: Requirements for the location and operation of actuators

GB/T 18209.3-2010 Electrical safety of machinery.Indication, marking and actuation.Part 3: Requirements for the location and operation of actuators has been changed from GB 18209.3-2002 Safety of machinery-Indication,marking and actuation--Part 3: Requirements for the location and operation of actuators.

GB/T 18209.3-2010 Electrical safety of machinery.Indication, marking and actuation.Part 3: Requirements for the location and operation of actuators was changed to EEMUA PUB NO 183-2011 Prevention of tank bottom leakage A guide for the design and repair of foundations and bottoms of vertical, cylindrical, steel storage tanks (Edition 2).

GB/T 18209.3-2010 -All Parts