GB/T 27710-2011
Floor drain (English Version)

GB/T 27710-2011
Standard No.
GB/T 27710-2011
Language
Chinese, Available in English version
Release Date
2011
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status
 2021-02
Replace By
GB/T 27710-2020
Latest
GB/T 27710-2020(XG1-2021)
Scope
This standard specifies the terms and definitions, classification, materials, requirements, test methods, inspection rules and signs, packaging, storage and transportation of floor drains. This standard applies to floor drains used in industrial and civil buildings. This standard does not apply to special floor drains used in special places, such as civil air defense projects.

GB/T 27710-2011 Referenced Document

  • GB 1176 Cast copper alloy technical conditions
  • GB/T 10125-1997 Corrosion tests in artificial atmospheres--Salt spray tests
  • GB/T 12600 Metallic coatings.Electroplated coatings of nickel plus chromium on plastics materials
  • GB/T 12716 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
  • GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
  • GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
  • GB/T 5270-2005 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
  • GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
  • GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
  • GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
  • GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
  • GB/T 9286-1998 Paints and varnishes--Cross cut test for films
  • HG/T 3091 Rubber seals.Joint rings for water supply,drainage and sewerage pipelines.Specification for materials
  • HG/T 3097 Rubber seals Jonit rings for pipelines for hot-water supply up to 110℃. Specification for the materials

GB/T 27710-2011 history



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved