ZH
EN
KR
JP
ES
RUPTFE gefüllt
Für die PTFE gefüllt gibt es insgesamt 27 relevante Standards.
In der internationalen Standardklassifizierung umfasst PTFE gefüllt die folgenden Kategorien: Zugehörige Beschichtung und zugehörige Prozesse für die Luft- und Raumfahrtfertigung, Materialien für die Luft- und Raumfahrtfertigung.
General Motors Corporation (GM), PTFE gefüllt
GM North America, PTFE gefüllt
- GM GMP.POM.011-2000 Acetal – geschmiert, 20 % PTFE gefüllt
- GM GMP.PA66.008-1999 Nylon 66 – 20 % PTFE gefüllt, hitzestabilisiert
- GM 9986139-2014 Fett, PTFE-gefülltes synthetisches Fett (Ausgabe 2)
- GM GMP.PA66.082-1999 Nylon 66 – Aramidfaserverstärkt, teflongefüllt, hitzestabilisiert
- GM GMP.PA66.017-2000 Nylon 66 – 30 % glasfaserverstärkt, 15 % PTFE-gefüllt, hitzestabilisiert
- GM GMP.PA66.082-2013 Nylon 66 – Aramidfaserverstärkt, teflongefüllt, hitzestabilisiert (Problem 2; nicht für neue Programme verwenden; kein Ersatz)
- GM GMP.POM.014-1994 Acetal – Homopolymer, 20 % PTFE-Faser gefüllt
Society of Automotive Engineers (SAE), PTFE gefüllt
- SAE AMS3140-1982 Beschichtung, Urethan, aliphatisches Isocyanat, gefüllt mit Polytetrafluorethylen
- SAE AMS3140-1994 BESCHICHTUNG, URETHAN, ALIPHATISCHES ISOCYANAT Mit Polytetrafluorethylen gefüllt
- SAE AMS3140B-2013 Beschichtung, Urethan, aliphatisches Isocyanat, gefüllt mit Polytetrafluorethylen
- SAE AMS3644/2-1979 STAB UND STAB AUS KUNSTSTOFF, POLYIMID-Graphit/PTFE-gefüllt, geformt 15/10
- SAE AMS3670/3B-2004 Stangen, Stäbe und Formen aus Polyamidimid, 12 % Graphit – 3 % Polytetrafluorethylen gefüllt
- SAE AMS3670/2B-1992 Stangen, Stäbe und Formen aus Polyamid-Imid: 20 Graphit – 3 Polytetrafluorethylen (PTFE) gefüllt
- SAE AMS3670/3B-1995 Stangen, Stäbe und Formen aus Polyamidimid, 12 % Graphit – 3 % Polytetrafluorethylen gefüllt
- SAE AMS3670/3A-1994 POLYAMID-IMID STAB, STAB UND FORMEN 12 Graphit – 3 Polytetrafluorethylen gefüllt
- SAE AMS3670/2-1981 POLYAMID-IMID STAB, STAB UND FORMEN 20 Graphit – 3 Polytetrafluorethylen gefüllt
- SAE AMS3670/3-1981 POLYAMID-IMID STAB, STAB UND FORMEN 12 Graphit – 3 Polytetrafluorethylen gefüllt
- SAE AMS3756C-2011 Formteile, glasfasergefülltes Polytetrafluorethylen, 75 % PTFE-Harz, 25 Glas, gesintert
- SAE AMS3670/2A-1985 STAB, STAB UND FORMEN AUS POLYAMID-IMID 20 Graphit – 3 Mit Polytetrafluorethylen (PTFE) gefüllt
SAE - SAE International, PTFE gefüllt
- SAE AMS3140A-2007 Beschichtung@ Urethan@ Aliphatisches Isocyanat Polytetrafluorethylen gefüllt
- SAE AMS3644/2A-1987 STAB UND STAB AUS KUNSTSTOFF@ POLYIMIDE Graphit/PTFE gefüllt@ Geformt 15/10
- SAE AMS3644/2B-1992 STAB UND STAB AUS KUNSTSTOFF@ POLYIMIDE Graphit/PTFE gefüllt@ Geformt 15/10
- SAE AMS3136F-2016 Beschichtungsmaterial@ Phenolharz@ PTFE-gefüllt, pigmentiert@ 150 °C (302 °F) Aushärtung
未注明发布机构, PTFE gefüllt
- SAE AMS3670/2B-2006 Stangen, Stäbe und Formen aus Polyamid-Imid: 20 Graphit – 3 Polytetrafluorethylen (PTFE) gefüllt
(U.S.) Ford Automotive Standards, PTFE gefüllt