ZH
RU
ES

degree

degree, Total:498 items.

In the international standard classification, degree involves: Character sets and information coding, Education, Farming and forestry, Tobacco, tobacco products and related equipment, Fuels, Pulps, Leather technology, Analytical chemistry, Adhesives, Environmental protection, Mining and quarrying, Rubber and plastics products, Tea. Coffee. Cocoa, Electricity. Magnetism. Electrical and magnetic measurements, Astronomy. Geodesy. Geography, Occupational safety. Industrial hygiene, Hydraulic construction, Non-metalliferous minerals, Products of the textile industry, Paints and varnishes, Components for electrical equipment, Air quality, Protection against crime, Soil quality. Pedology, Metalliferous minerals, Paint coating processes, Cereals, pulses and derived products, Medical sciences and health care facilities in general, Information sciences. Publishing, Optoelectronics. Laser equipment, Glass, Elements of buildings, Coals, Paper and board, Textile machinery, Paint ingredients, Applications of information technology, Electrical engineering in general, Road engineering, Textile fibres, Company organization and management, Surface treatment and coating, Equipment for processing of minerals, Quality, Ferrous metals, Products of the chemical industry, Construction materials, Pesticides and other agrochemicals, Fruits. Vegetables, Environmental testing, Edible oils and fats. Oilseeds, Animal feeding stuffs, Sugar. Sugar products. Starch, Physics. Chemistry, Corrosion of metals, Beverages, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Manufacturing forming processes, Optics and optical measurements, Test conditions and procedures in general, Geology. Meteorology. Hydrology, Protection against fire, Aircraft and space vehicles in general, Electromechanical components for electronic and telecommunications equipment, Software development and system documentation, Reinforced plastics, Iron and steel products, Agricultural machines, implements and equipment, Nuclear energy engineering, Water quality, Plastics, Hydraulic energy engineering, Welding, brazing and soldering, Aerospace fluid systems and components, Alarm and warning systems, Vocabularies, CHEMICAL TECHNOLOGY, Measurement of time, velocity, acceleration, angular velocity, Industrial automation systems, Wood-based panels, Footwear, Components and accessories for telecommunications equipment, Materials for aerospace construction, Road vehicles in general, Explosion protection, Safety of machinery, Cans. Tins. Tubes, Fluid power systems, Non-destructive testing, Insulation, Radiation protection, Thermodynamics and temperature measurements, Earthworks. Excavations. Foundation construction. Underground works, Linear and angular measurements, Lubricants, industrial oils and related products, Biology. Botany. Zoology, Equipment for the chemical industry, Fluid storage devices, Inorganic chemicals.

HU-MSZT, degree

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, degree

GB/T 4658-1984 Codes for educational level
GB 4658-1984 Codes for educational level
GB/T 6865-1986 Codes for levels of mastering foreign and national languages
GB/T 32369-2015 Determination of the degree of cure for sealant
GB/T 23655-2009 Test for the cure level of compound latex
GB/T 31147-2014 Assessment of the level of nursing dependency for the personal injury
GB/T 5817-2009 Hazardous degree classification of workplace with dust
GB/T 31727-2015 Test method for attrition rate of transparent plastic film
GB 5044-1985 Classification of health hazard levels from occupational exposure to toxic substances
GB 5817-1986 Classification of hazard levels due to exposure to industrial dust
GB/T 2678.3-1995 Pulp--Determination of chlorine consumption (Degree of delignification)
GB/T 9287-1988 Comparison of ease of dispersion of pigments--Oscillatory shaking method
GB 9287-1988 Comparison of ease of dispersion of pigments－Oscillatory shaking method
GB/T 13785-1992 Test method for degree of sugar contains in cotton fibres--Colorimetry
GB/T 13312-1991 Test method for degreasing degree of steel parts before painting
GB/T 19833-2005 Coal preparation plant.Assessment of the liability to breakdown in water of materials associated with coal seams
GB/T 6865-2009 Codes for levels of language proficiency and foreign language test grades
GB/T 32777-2016 Test method of degree of dissolution and solution stability for pesticides
GB/T 14826-1993 Determining and evaluating degree of chalking of paint coats
GB/T 4796-2017 Classification of environmental conditions—Environmental parameters and their severities
GB/T 14091-2009 Classification of environmental parameters and their severities for machinery products
GB/T 42362-2023 Specification for evaluation of damage degree of groundwater aquifer damage in mining areas
GB/T 4796-2001 Classification of environmental parameters and their severities of electric and electronic products
GB/T 14557-1993 Electrical tests and measuring procedures for ridio-frequency connectors:Reflection factor
GB/T 14091-1993 Classification of environmental parameters and their severities for machinery products
GB/T 4796.1-2017 Classification of Environmental Conditions Part 1: Environmental Parameters and Their Severity
GB/T 25312-2010 The standardization for the evaluation of welder exposure to electrmagnetic field of welding equipment
GB/T 26638-2011 Classification of complexity and equivalent coefficient of open die forgings on hydraulic press
GB/T 6410-1986 Textiles--Tests for color fastness--Instrumental assessment of the degree of staining of adjacent fabrics
GB/T 12588-2003 Plastics coated fabrics--Polyvinyl chloride Coatings--Rapid method for checking fusion
GB/T 19811-2005 Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test

Canadian Standards Association (CSA), degree

CSA ISO/IEC 15939-08-CAN/CSA:2008 Systems and software engineering ?Measurement process

PL-PKN, degree

PN BN 7303-02-1966
PN M66026-1992 Press tools. Danger degrees
PN E06705-1988 Roiating electrical machines Degrees of protection
PN P82456-1988 Flax goods degrees óf white
PN P50095-03-1985 Paper half products Determination of the delignification degree= Determination of ch?onne consumption (Degree of delignification)
PN M57729-1986 Shell end mills Interchangeability dimensions
PN BN 7451-11-1965 Bookbinder products The marking of degree of pressing and thickness
PN C81543-1988 Paints Evaluating degree of setting of pigments and extenders
PN P55506-1991 Bookbinding. Determination linear dimensions, squareness, thickness and pressing degree
PN BN 7303-01-1966
PN C05552-1988 Water and waste water The evaluation of the degree of river water pollution using the light and dark botlle test

SE-SIS, degree

SIS 18 41 95-1968 Paints. Evaluating degree of cruckiiix
SIS 70 50 12-1959
SIS 65 00 10-1951
SIS 18 41 97-1969 Exterior paints. Evaluating degree of chalking
SIS SMS 795-1963
SIS SMS 875-1963
SIS SS-ISO 8690:1990 Decontamination of radioactively contami- nated surfaces — Method for testing and assessing the ease of decontamination
SIS SS-ISO 7753:1989 Nuclear energy — Performance and testing requirements for criticality detection and alarm systems

RO-ASRO, degree

STAS 7273-1984 YARNS Determination of twist
STAS 625-1985 ROTATlNG ELECTHICAL MACHINES Norma] degrees of proteetion
STAS 12344-1985 Paper and board POLLUTION DEGREE DETERMINATION
STAS 9699-1974 WAXED PAPKRS nctermination of the degree of grease impermeability
STAS 7468-1980 CALCULUS OF GROUND OCCUPA- TION DEGREE FOR BUILD1NG WORKS EMPLACEMENT
STAS SR EN 60529-1995 Degrees of protection provided by enclosures (IP Code)
STAS 6624/2-1976 WOOL AND WOOL-BLENDED KNITTED GOODS Colour and print minimum resistances
STAS 6227-1970 ORGANIC DYESTUFFS Test for colour fastness to rubbing with organic solvents
STAS 12343-1985 Fibrous half-stuffs of pulpy industry POLLUTION DEGREE DETERMINATION
STAS 5325-1979 DEGREES OF PRQTECTION PROVIDED BY ENCLOSURES Classification. aad test methods
STAS 3349/1-1983 Cement concretes SPECIFICATIONS FOR WATER AGGRESSIVNESS DEGREE EVALUATION
STAS 5432/1-1985 Land amelioration works EXCEEDING PROBABILIT1ES AND INSURANCE DEGREES
STAS 9871-1974 Earth fills DETERMINATION OF THE DEGREE OF COMPAGTION Successive compaction method
STAS 723/6-1974 LEATHERS Determination of bonded tanning substances and tanning degree
SR ISO 4628/4:1993 Paints and vamishes-Evaluation of degradation of paint coatings-Designation of intensity, quantity and size of common types of defect-Part 4: Designation of degree of cracking
STAS 8867-1972 hop Determination of moisture content and characteristics for assessing the degree of bitterness
STAS 12698-1989 TUFTED TEXTILE MATERIALS Tuft set degree determination Method by rubbing
STAS 6624/1-1976 VISCOSE, COTTON BLENDED AND COTTON KN1TTED GOODS Colour and print minimum resistances
STAS 6861-1982 LINEN OR HEMP AND LIEN TYPE OR HEMP TYPE WOVEN FABRICS Minimum fastness of colours and prints
STAS CEI 721-1-1992 Clasification of environmental conditions. Part 1: Environmental parameters and their severities
STAS SR 13201-1994 Textiles materials. Determination of termosetting degree of textile materials in termoset polyamide

Hubei Provincial Standard of the People's Republic of China, degree

DB42/T 1529-2019 Identification of the extent of cultivated land damage

RU-GOST R, degree

GOST 30423-1996 Cigarettes. Determination of loss of tobacco from the ends
GOST 10650-1972 Peat. Determination of the disintegration degree
GOST 9105-1974 The determination method of polymerisation average degree
GOST 16976-1971 Coatings of lacquers and paints. Method for determination of chalking degree
GOST 29177-1991 Grain. Methods of determining of distruction grade of starch
GOST 3521-1981 Optical glass. Method for determination of unstriae
GOST R 54850-2011 Roof windows and skylights. Metod for determination of reduced of thermal resistance
GOST R 54850-2011(2019) Roof windows and skylights. Metod for determination of reduced of thermal resistance
GOST R 54570-2011 Steels. Assessing the degree of banding or orientation of microstructures
GOST 26544-1985 Wood protection means. Method of corrosive agressiveness evaluation
GOST 32976-2014 Hard coal. Determination of the relative degree of oxidation by the method of alkali extracnion
GOST R 57811-2017 Testing fresh concrete. Part 4. Degree of compactability
GOST 29215-1991 Pulps. Method for the determination of chlorine consumption (degree of delignification)
GOST 5902-1980 Confectionery. Determination methods of pounding degree and density of porous products
GOST 23943-1980 Wines and konjaks. Methods of determination of bottle tilling
GOST 25471-1982 Iron ores, concentrates, agglomerates and pellets. Method for the determination of solidity on droption
GOST R 57755-2017 Polymer composites. Prepregs. Determination of the degree of fibre wetting
GOST 32716-2014 Facing material based on impregnated papers with a deep degree or resin cure. Specifications
GOST 31968-2013 Motor vehicles. Recyclability and recoverability calculation method
GOST 19823-1974 Filter air purification means for collective protection objects. Method for determination of air-tightness degree
GOST 33938-2016 The definition of acceptable level (degree) of risk and hazard industry-wide manufacturing equipment
GOST 22091.8-1984 X-ray devices. Method of measuring spectral structure and relative spectrum contamination
GOST 27905.2-1988 Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures
GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter
GOST 21820.4-1976 Cotton seed. Methods for determination of residual disinfectant content size uniformity and granary pest infestation
GOST 13300-1967 Motor oils. Method for the determination of corrosive properties and oxidability at P33 plant

BE-NBN, degree

CU-NC, degree

NC 08-19-1988 Welding. Metal Fusion Welding. Defect Quantification
NC 42-20-1968 Determination of the Kappa number of pulp (Degree of delignification)

European Committee for Standardization (CEN), degree

HD 365 S3-1985 Classification of degrees of protection provided by enclosures
EN ISO 20863:2018 Footwear - Test methods for stiffeners and toepuffs - Bondability
EN 12575:1998 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
EN ISO 19285:2017 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels
EN ISO 20266:2020 Paints and varnishes - Determination of image clarity (degree of sharpness of reflected or transmitted image) (ISO 20266:2018)

GM North America, degree

GM GM9698P-1998 Test for Cure State of Elastomers

BR-ABNT, degree

ABNT NB-93-1964

Inner Mongolia Provincial Standard of the People's Republic of China, degree

DB15/T 1317-2018 Evaluation of the control degree of shifting sandy land
DB15/T 411-2005 Appraisal of being nursed extent of a disabled person in road traffic accident

Jiangsu Provincial Standard of the People's Republic of China, degree

DB3203/T 1004-2021 Criteria for appraisal of cultivated land damage degree

Taiwan Provincial Standard of the People's Republic of China, degree

CNS 1292-1981 Method of Test Tanning Degree of Leather
CNS 1273-1960 Method of Test for Leather (Decoloration Test)
CNS 1277-1960 Method of Test for Leather (Compression Test)

Guangdong Provincial Standard of the People's Republic of China, degree

DB44/T 2261-2020 Technical regulations for classification and monitoring of algal blooms

BELST, degree

STB 996-2011 Forms of securities and documents with a degree of protection, documents with a degree of protection. The general requirements
STB 997-2011 Forms of securities and documents with a degree of protection, documents with a degree of protection. Terms and definitions

Indonesia Standards, degree

SNI 13-3617-1994 Determination of Grinding work index by Bond Ball Mill
SNI 13-4182-1996 Measurement code for degree of salinity of soils

CZ-CSN, degree

CSN 67 6005-1962 Determination of dispersion degree f printing inks
CSN 67 6007-1962 Determination oí drying degree f printing inks
CSN 67 3032-1987 Paints and varnishes. Determination of degree of thinning
CSN 67 3054-1986 Paints and varnishes Determination of the degree of leveHing
CSN 80 3304-1987 Apparel fabrics. Types and extents of faults
CSN 80 4204-1987 Household fabrics. Types and extents of faults
CSN 33 0331-1978 Electrical apparatuses for the voltage up to 1000 V. Degree of protection
CSN 35 0001-1986 Degrees of protection provided by enclosures, marking and testing methods of rotating electrical machines

Group Standards of the People's Republic of China, degree

T/GDBWTA 0001-2023 Classification standard of roasting degree of coffee beans
T/CDHTHRA LR001-2018 Specification for evaluating harmonious degree of labour relation in enterprises
T/HXCY 031-2020 Code of Practice for Proper Utilization of Songnen Grassland under Different Degree of Degradation
T/CTES 1002-2021 Textiles-Tests for colour fastness-Solution staining to washing
T/HXCY 013-2019 Specification for Warning Technologies Based on Indicator Plants of Alpine Wetland Degradation
T/ZSFX 009-2021 Textiles-Evaluation method for color change degree of solution after washing
T/ZZB 1743-2020 Industrial process temperature calibrator

British Standards Institution (BSI), degree

BS EN 60868-0:1993 Flickermeter. Evaluation of flicker severity
BS ISO 11258:2007 Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization
BS ISO 11258:2015 Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization
BS ISO 3260:2015 Pulps. Determination of chlorine consumption (Degree of delignification)
BS EN 60721-1:1996 Classification of environmental conditions. Environmental parameters and their severities
BS EN ISO 4628-6:2011 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by tape method
BS EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
BS EN 16870:2017 Water quality. Guidance standard on determining the degree of modification of lake hydromorphology
BS EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
BS EN ISO 23277:2015 Tracked Changes. Non-destructive testing of welds. Penetrant testing. Acceptance levels
BS EN ISO 23278:2015 Tracked Changes. Non-destructive testing of welds. Magnetic particle testing. Acceptance levels
BS ISO 17221:2014 Plastics. Determination of image clarity (degree of sharpness of reflected or transmitted image)
BS EN ISO 20863:2004 Footwear - Test method for stiffeners and toepuffs - Bondability
BS EN ISO 11666:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN ISO 19285:2017 Non-destructive testing of welds. Phased array ultrasonic testing (PAUT). Acceptance levels
BS EN ISO 17932:2011 Palm oil. Determination of the deterioration of bleachability index (DOBI) and carotene content
20/30408427 DC BS EN 17428. Packaging. Determination of the degree of disintegration under simulated home composting conditions
BS ISO 17771:2003 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC
BS EN 10049:2013 Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products
BS EN 60721-3-0:1993 Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Introduction
BS EN IEC 60721-3-0:2020 Classification of environmental conditions - Classification of groups of environmental parameters and their severities. Introduction

民政部, degree

MZ/T 044-2013 On-site identification of winter wheat drought severity
MZ/T 043-2013 On-site identification of the degree of house disaster damage
MZ/T 066-2016 On-site identification of winter wheat low temperature and freezing damage degree

Association Francaise de Normalisation, degree

T12-019:1987 Pulps. Degree of delignification during bleeding.
NF C20-010/A1*NF EN 60529/A1:2000 Degrees of protection provided by enclosures (IP Code).
NF EN 15843:2010 Qualité de l'eau - Guide pour la détermination du degré de modification de l'hydromorphologie des rivières
NF T12-031*NF ISO 3260:1987 Pulps. Determination of chlorine consumption (degree of delignification).
NF ISO 3260:1987 Pâtes à papier - Détermination de la consommation en chlore (degré de délignification)
NF EN ISO 1741:1994 Dextrose cristallisé - Détermination de la perte de masse à la dessiccation - Méthode par étuvage sous pression réduite.
NF X42-120*NF EN 12296:1998 Equipment. Guidance on testing procedures for cleanability.
NF P18-431-4:2009 Testing fresh concrete - Part 4 : degree of compactability.
NF V03-941:1976 Soya beam products.assessment of degree of cooking.(cresol red test).
NF G52-207:1976 Leathers and hides. Chemical testing of leather. Calculation of degree of tannage.
NF V03-941:2004 Produits dérivés du soja - Évaluation du degré de cuisson - Essai au rouge de crésol
NF T90-396*NF EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
NF EN 16870:2017 Qualité de l'eau - Préconisations pour la détermination du degré de modification des caractéristiques hydromorphologiques des lacs
NF M60-444*NF ISO 16117:2013 Nuclear criticality safety - Estimation of the number of fissions of a postulated criticality accident
NF T90-870*NF EN 16870:2017 Water quality - Guidance standard on determining the degree of modification of lake hydromorphology
NF EN ISO 8501-4:2020 Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Evaluation visuelle de la propreté d'un subjectile - Partie 4 : états de surface initiaux, degrés de préparation et degrés de fleurette de rouille ap...
NF C93-557:2001 RF connectors, connector cable assemblies and cables - Intermodulation level measurement.
NF H34-069*NF EN 15766:2009 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone.
NF C20-001*NF EN 60721-1:1995 Classification of environmental conditions. Part 1 : environmental parameters and their severities.
FD DTU 36.5 P3:2010 Travaux de bâtiment - Mise en oeuvre des fenêtres et portes extérieures - Partie 3 : mémento de choix en fonction de l'exposition
NF EN ISO 20266:2020 Peintures et vernis - Détermination de la netteté de l'image (degré de netteté de l'image réfléchie ou transmise)
NF A45-000*NF EN 10049:2014 Measurement of roughness average Ra and peak count RPc on metallic flat products

Professional Standard - Water Conservancy, degree

SL 718-2015 Classification standards for potential hazard of soil erosion
SL 237-004-1999 Code for test of soil - density test

American Society for Testing and Materials (ASTM), degree

ASTM D869-85(2004) Standard Test Method for Evaluating Degree of Settling of Paint
ASTM D869-85(2011) Standard Test Method for Evaluating Degree of Settling of Paint
ASTM D714-56(1981)e1 Standard Method of Evaluating Degree of Blistering of Paints
ASTM D659-86e1 Method of Evaluating Degree of Chalking of Exterior Paints
ASTM D913-20 Standard Practice for Evaluating Degree of Pavement Marking Line Wear
ASTM D913-15 Standard Practice for Evaluating Degree of Traffic Marking Line Wear
ASTM D868-85(2003) Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
ASTM D868-21 Standard Practice for Determination of Degree of Bleeding of Traffic Paint
ASTM D868-10(2015) Standard Practice for Determination of Degree of Bleeding of Traffic Paint
ASTM D714-87(1994)e1 Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D868-10(2020) Standard Practice for Determination of Degree of Bleeding of Traffic Paint
ASTM D661-44(1975) Standard Method of Evaluating Degree Of Cracking Of Exterior Paints
ASTM D714-02e1 Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D714-02 Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D772-86(2005) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D969-85(2003)e1 Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D969-85(1998) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D4214-98 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D714-02(2009) Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D86-18 Standard Test Method for Evaluating Degree of Settling of Paint
ASTM D869-21 Standard Test Method for Evaluating Degree of Settling of Paint
ASTM D714-02(2017) Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D4214-07(2015) Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D96-73(1984) Laboratory test method for degree of bleeding of road marking paint
ASTM D96-88(1998) Laboratory test method for degree of bleeding of road marking paint
ASTM D660-93(2005) Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D662-93(2005) Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
ASTM D913-03e1 Standard Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint
ASTM D913-03 Standard Test Method for Evaluating Degree of Resistance to Wear of Traffic Paint
ASTM D660-44(1970) Standard Method Of Evaluating Degree Of Resistance To Checking Of Exterior Paints
ASTM D661-93(2005) Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
ASTM D610-08 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D868-10 Standard Practice for Determination of Degree of Bleeding of Traffic Paint
ASTM D660-93(2011) Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D662-93(2011) Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
ASTM E1268-18 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
ASTM E1268-19 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
ASTM D662-93 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
ASTM D772-47(1975) Standard Method of Evaluating Degree Of Flaking (Scaling) Of Exterior Paints
ASTM D772-86(2000) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D4214-07 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM C454-83(2007) Standard Practice for Disintegration of Carbon Refractories by Alkali
ASTM C454-83(2002) Standard Practice for Disintegration of Carbon Refractories by Alkali
ASTM D661-93 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
ASTM D661-93(2011) Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
ASTM D661-93(2019) Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
ASTM D662-93(2019) Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
ASTM D610-95 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D610-07 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D610-01 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D772-86(2011) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D610-08(2012) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM F2865-13(2021) Standard Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch
ASTM F2865-13 Standard Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch
ASTM D4214-23 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM E1268-01(2016) Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
ASTM D2941-00(2004) Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D868-85(1998) Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
ASTM E1301-95e1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM D2941-00 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM E1301-95(2003) Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM D2941-00(2008) Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D772-86(1993) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D772-18 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D969-85(2003) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D2941-00(2012) Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2941-13 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D4599-97 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D459-08 Standard Terminology Relating to Soaps and Other Detergents
ASTM D459-08a Standard Terminology Relating to Soaps and Other Detergents
ASTM F2865-11 Standard Guide for Classifying the Degrees of Ingression Protection Provided by a Membrane Switch
ASTM D4913-00(2011) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D4913-00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM C1851-18(2023) Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
ASTM D5715-23 Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

Professional Standard - Textile, degree

FZ/T 20019-2006 Test method for determining the seam slippage of wool woven fabrics
FZ/T 01024-1993 Method for instrumental rating of degree of discoloration of specimens
FZ/T 20019-1999 Test method for determining the seam slippage of wool woven fabrics
FZ/T 01023-1993 Instrumental method for rating the degree of staining of adjacent fabrics
FZ/T 01080-2000 Determination of the degree of crosslinkage for resin-finished fabrics.Dyeing method
FZ/T 01080-2009 Testing method for the degree of crosslinkage for resin-finished fabrics-Dyeing method

Professional Standard-Safe Production, degree

AQ/T 4208-2010 Classification of health hazard levels of toxic chemicals workplace
AQ 2017-2008 Classification method of public hazard levels for natural gas well involving hydrogen sulfide

Professional Standard - Public Safety Standards, degree

GA/T 800-2008 Assessment of the extent on being nursed for personal injury
GA/T 2000.206-2018 Police Information Code Part 206: Proficiency Codes
GA/T 2000.74-2015 Information codes for public security industry.Part 74:Codes for extent of personal injury
GA/T 2000.131-2016 Information codes for public security industry.Part 131:Codes for depreciation degrees of articles
GA 240.21-2003 The information management code in criminal offense - Part 21: Consequences code
GA 240.13-2000 The information management code criminal offense.Part 13:Codes of degrees of physical injury

Japanese Industrial Standards Committee (JISC), degree

JIS Z 2607:1963 Method for determining deterioration of foundry sands
JIS P 8122:1976 Testing method for stockigt sizing degree of paper
JIS Q 0043-1:1998 Proficiency testing by interlaboratory comparisons -- Part 1: Development and operation of proficiency testing schemes
JIS M 8713 AMD 1:2017 Iron ores -- Determination of reducibility by the final degree of reduction index (Amendment 1)
JIS Z 8718:1990 Evaluation method of degree of metamerism for change in observers
JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
JIS C 60721-1:2009 Classification of environmental conditions -- Part 1: Environmental parameters and their severities
JIS C 60721-1:1995 Classification of environmental conditions Part 1: Classification of environmental parameters and their severities

Anhui Provincial Standard of the People's Republic of China, degree

DB34/T 3730-2020 Technical specification for identification of cultivated land damage degree
DB34/T 2387-2023 Guidelines for the preparation of flood control programs for small and medium-sized water conservancy and hydropower construction projects
DB34/T 2387-2015 Guidelines for the preparation of flood control programs for small and medium-sized water conservancy and hydropower construction projects

Shaanxi Provincial Standard of the People's Republic of China, degree

DB61/T 1541-2022 Classification requirements for soil erosion risk degree

Heilongjiang Provincial Standard of the People's Republic of China, degree

DB23/T 1376-2010 Determination of damage degree of forest fires
DB23/T 3086-2022 Classification standard of black soil organic matter loss degree

Professional Standard-Ships, degree

CB/T 3745-1995 Comprehensive evaluation and classification of occupational hazards

Qinghai Provincial Standard of the People's Republic of China, degree

DB63/T 2064-2022 Technical specification for assessment of grassland damage degree

Standard Association of Australia （SAA）, degree

AS/NZS 4377:1996 Flickermeter- Evaluation of flicker severity
AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating
AS 3894.4:2002(R2013)
AS/NZS 1580.481.1.4:1998 Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of dirt retention (after washing)
AS/NZS 1580.481.1.3:1998 Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of dirt collection

水利部, degree

SL/T 718-2015 Soil erosion risk classification standards

International Organization for Standardization (ISO), degree

ISO 11258:2007 Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization
ISO 11258:2015 Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization
ISO 3260:1975 Title missing - Legacy paper document
ISO 3260:2015 Pulps - Determination of chlorine consumption (Degree of delignification)
ISO 3260:1982 Pulps; Determination of chlorine consumption (Degree of delignification)
ISO 4111:1979 Fresh concrete; Determination of consistency; Degree of compactibility (Compaction index)
ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 10062:1991 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 4628-10:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
ISO 16117:2013 Nuclear criticality safety.Estimation of the number of fissions of a postulated criticality accident
ISO 17221:2014 Plastics - Determination of image clarity (degree of sharpness of reflected or transmitted image)
ISO 4628-7:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
ISO 12992:1995 Plastics - Vertical flame spread determination for film and sheet
ISO 19285:2017 Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
ISO 20266:2018 Paints and varnishes - Determination of image clarity (degree of sharpness of reflected or transmitted image)
ISO 105-A05:1996 Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating

Building Officials and Code Administrators International(U.S.), degree

BOCA IPC-1997 APPENDIX D-1997 Degree Day and Design Temperatures for Cities in the United States

North Atlantic Treaty Organization Standards Agency, degree

STANAG 4425-1998 A PROCEDURE TO DETERMINE THE DEGREE OF INTERCHANGEABILITY OF NATO INDIRECT FIRE AMMUNITION
STANAG 2389-2009 MINIMUM STANDARDS OF PROFICIENCY FOR TRAINED EXPLOSIVE ORDNANCE DISPOSAL PERSONNEL
STANAG 7145-2008 MINIMUM CORE COMPETENCY LEVELS AND PROFICIENCY OF SKILLS FOR NATO FIRE FIGHTERS

KR-KS, degree

KS E ISO 11258-2017 Iron ores for shaft direct-reduction feedstocks－Determination of the reducibility index, final degree of reduction and degree of metallization
KS M ISO 3260-2017 Pulps－Determination of chlorine consumption(Degree of delignification)
KS B ISO 19285-2018 Non-destructive testing of welds — Phased array ultrasonic testing(PAUT) — Acceptance levels

ZA-SANS, degree

SANS 618:2009 Information and documentation - Holdings statements - Summary level
SANS 15939:2002 Software engineering — Software measurement process

Occupational Health Standard of the People's Republic of China, degree

GBZ 230-2010 Classification for hazards of occupational exposure to toxicant
GBZ(卫生) 230-2010 Classification for hazards of occupational exposure to toxicant

Korean Agency for Technology and Standards (KATS), degree

KS X ISO 10324:2008 Information and documentation-Holdings statements-Summary level
KS X ISO 10324:2013 Information and documentation－Holdings statements－Summary level
KS M ISO 3260:2002 Pulps-Determination of chlorine consumption(Degree of delignification)
KS M 5975-1994 Testing method for evaluating degree of cracking of dried film of paints
KS M 5973-2007 Testing method for evaluating degree of blistering of dried film of paints
KS M ISO 3260:2017 Pulps－Determination of chlorine consumption(Degree of delignification)
KS F 2452-2010 Standard test method for determination of the consistency of fresh concrete by evaluating the degree of compactibility
KS M 5974-1994 Test method for evaluating degree of rusting on painted steel surface
KS M ISO 4628-6:2012 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 6：Assessment of degree of chalking by tape method
KS C 0278-1997 Classification of environmental conditions Part l : Classification of environmental parameters and their severities
KS C IEC 60721-1:2014 Classification of environmental conditions — Part 1: Environmental parameters and their severities
KS C IEC 60721-1-2014(2019) Classification of environmental conditions — Part 1: Environmental parameters and their severities
KS A ISO 10648-2:2003 Containment enclosures－Part 2：Classification according to leak tightness and associated checking methods
KS B ISO 19285:2018 Non-destructive testing of welds — Phased array ultrasonic testing(PAUT) — Acceptance levels
KS C 0280-1997 Classification of environmental conditions Part 3:Classification of groups of environmenta1 parameters and their severities Introduction
KS C 0278-1997(2012) Classification of environmental conditions Part l : Classification of environmental parameters and their severities

Professional Standard - Coal, degree

MT/T 1158-2011 Classification of coalification degree by vitrinite reflectance
MT/T 1075-2008 Coal preparation plant-performance evaluation of the liability to breakdown in water of materials associated with coal seams

Professional Standard - Aerospace, degree

QJ 1193.20-1987 Personnel system data element culture degree code
QJ 1420.7-1988 Classification and codes of industrial accidents Classification and codes of injury degrees of industrial accidents
QJ 1420.8-1988 Classification and codes of industrial accidents Classification and codes of severity of industrial accidents

National Health Commission of the People's Republic of China, degree

GBZ/T 230-2010 Hazard classification of occupational exposure to poisons

Professional Standard - Electricity, degree

DL/T 2015-2019 Measuring specification for electric power information software engineering

FI-SFS, degree

SFS 4285-1979

DE-VDA, degree

VDA 230-204-2005

Professional Standard - Labor and Labor Safety, degree

LD 84-1995 Rules of inspect for classification of hazard levels due to exposure to industrial dust

中华人民共和国国家卫生和计划生育委员会, degree

GB/T 16180-1996 Assessment and gradation of disability caused by work-related injuries and occupational diseases

AR-IRAM, degree

YU-JUS, degree

JUS M.A1.010-1983 Surface roughness. Terminology. Surface and its parameters
JUS M.A1.020-1981 Surface roughness ofindustrial products. Terms and definations
JUS C.A3.011-1985 Steel, non alloy and low alloy — Determination ofdepth of decarburization
JUS M.A1.024-1981 Sur face roughness of industrial products. Classification of surface fktws
JUS M.A1.027-1981 Surface roughness ofindustrial products. Classification ofscraped surfaces.

Xinjiang Provincial Standard of the People's Republic of China, degree

DB65/T 2584-1998 Classification of occurrence degree of main crop diseases and insect pests

Professional Standard - Agriculture, degree

JB/Z 236-1985 Test method for degreasing degree of steel parts before painting

国家安全生产监督管理总局, degree

MT/T 1075-2007 Assessment of mudification degree of coal associated minerals in coal preparation plant

CN-STDBOOK, degree

图书 3-9562 Boiler engineering strength

ES-AENOR, degree

Professional Standard - Commodity Inspection, degree

SN/T 0755-1999 Test method for determining the spiralling degree in laundering of knitted fabrics for export
SN/T 3779-2014 Determination on hand feeling of textiles at low temperature

AENOR, degree

UNE 57117:1984 PULPS. DETERMINATION OF CHLORINE CONSUMPTION. (DEGREE OF DELIGNIFICATION)
UNE-EN 16870:2017 Water quality - Guidance standard on determining the degree of modification of lake hydromorphology
UNE-EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
UNE-EN 12575:1999 PLASTICS. THERMOSET MOULDING COMPOUNDS. DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC.
UNE-EN 1620:1996 Biotechnology - Large-scale process and production - Plant building according to the degree of hazard

Sichuan Provincial Standard of the People's Republic of China, degree

DB5101/T 20-2018 Standards for evaluating the harmonious degree of labor relations in Xindu District
DB51/T 3101-2023 Standards for determining the degree of damage caused by grassland fires in Sichuan Province

国家市场监督管理总局、中国国家标准化管理委员会, degree

GB/T 39270-2020 Voltage dip indices and severity assessment method
GB/T 37086-2018 Industrial process temperature calibrator

ES-UNE, degree

UNE-ISO 3260:2021 Pulps – Determination of chlorine consumption (Degree of delignification)
UNE 178401:2017 Smart cities. Street lighting. Degrees of functionality, zoning and control arquitecture

German Institute for Standardization, degree

DIN ISO 3260:2016-05 Pulps - Determination of chlorine consumption (Degree of delignification) (ISO 3260:2015)
DIN EN 16870:2017-05 Water quality - Guidance standard on determining the degree of modification of lake hydromorphology; German version EN 16870:2017
DIN EN 15843:2010-05 Water quality - Guidance standard on determining the degree of modification of river hydromorphology; German version EN 15843:2010
DIN ISO 3260:2016 Pulps - Determination of chlorine consumption (Degree of delignification) (ISO 3260:2015)
DIN EN 17428:2020 Packaging - Determination of the degree of disintegration under simulated home composting conditions; German and English version prEN 17428:2020
DIN 51937:1994-07 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN EN 17428:2020-04 Packaging - Determination of the degree of disintegration under simulated home composting conditions; German and English version prEN 17428:2020 / Note: Date of issue 2020-03-20
DIN 19682-12:2007 Soil quality - Field tests - Part 12: Determination of degree of decomposition of peat
DIN EN 16870:2017 Water quality - Guidance standard on determining the degree of modification of lake hydromorphology
DIN EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006); English version of DIN EN ISO 10062:2008-04
DIN 6167:1980-01 Description of yellowness of near-white or near-colourless materials
DIN 1996-7:1992 Testing of asphalt; determination of bulk density, compacted density, void content and degree of compaction
DIN EN ISO 105-A05:1997 Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating (ISO 105-A05:1996, including Technical Corrigendum 1:1997); German version EN ISO 105-A05:1997
DIN 53159:2010-08 Paints and varnishes - Determination of the degree of chalking of paint coatings by the Kempf method
DIN 19682-12:2007-11 Soil quality - Field tests - Part 12: Determination of degree of decomposition of peat
DIN ISO 3260:1986 Pulps; determiantion of chlorine consumption (degree of delignification); identical with ISO 3260, edition 1982
DIN EN 1620:1996-10 Biotechnology - Large-scale process and production - Plant building according to the degree of hazard; German version EN 1620:1996

未注明发布机构, degree

BS EN 60868-0:1993(1999) Flickermeter — Part 0 : Evaluation of flicker severity

NATO - North Atlantic Treaty Organization, degree

STANAG 4425-1994 Procedure to Determine the Degree of Interchangeability of NATO Indirect Fire Ammunition (ED 1 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2

Professional Standard - Ministry of Public Security Logo, degree

GNn 36.2-1988 Hazard degree code of crime information management standard

国家质量监督检验检疫总局, degree

SN/T 4497-2016 Standards for assessment of potential harm to imported and exported consumer goods

TH-TISI, degree

TIS 1740-1999 Fresh concrete.determination of consistency.degree of compactibility (compaction index)

Danish Standards Foundation, degree

DS/ISO 4628/2:1985 Paints and varnish coatings. Evaluation of defects. Part 2: Blistering
DS/EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
DS/EN 12575:1999 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
DS/EN 60721-1+A2:1996 Classification of environmental conditions - Part 1: Environmental parameters and their severities
DS/IEC 721-1:1993 Classification of environmental conditions. Part 1: Environmental parameters and their severities
DS/ISO 4406:2021 Hydraulic fluid power – Fluids – Method for coding the level of contamination by solid particles
DS/EN 1620:1999 Biotechnology - Large-scale process and production - Plant building according to the degree of hazard

Professional Standard - Machinery, degree

JB/T 4385.2-1999 Classification for complexity & equivalent coefficient of open die forgings on hammer
JB/T 9178.2-1999 Classification of complexity and equivalent cofficient of open die forgings on hydraulic press

SSPC - The Society for Protective Coatings, degree

VIS 2-1982 Guide to Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces

Fujian Provincial Standard of the People's Republic of China, degree

DB35/T 859-2016 Classification of soil heavy metal pollution in agricultural product producing areas

American National Standards Institute （ANSI), degree

AWS D18.2:2020 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
ANSI/NFPA 405-2010 Standard for the Recurring Proficiency of Airport Fire Fighters
ANSI/ASME PTC19.3-1974 Performance Test Code - Temperature Measurement

API - American Petroleum Institute, degree

API TR IOSC-006-1997 Differences in Risk Perception: How Clean is Clean?

VE-FONDONORMA, degree

COVENIN 983-1976

CH-SNV, degree

ISUZU - Isuzu Motors Ltd., degree

ISC-F13-001-1978 Classification of Severity of Porosity in Aluminium Castings (Japanese/English Version)
ISC-F13-004-1986 Classification Of Severity of Defects in Aluminum Die Castings (Japanese/English Version)

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, degree

REPORT BT.959-2-1990 Experimental results relating picture quality to objective magnitude of impairment

中国气象局, degree

QX/T 341-2016 Rainfall intensity level

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, degree

GB/T 33216-2016 Steel open die forgings on hammer—Classification of complexity and equivalent coefficient

AREMA - American Railway Engineering and Maintenance-of-Way Association, degree

1013-1996 Manganese Castings Internal Soundness Severity Levels ((See AREMA PORTFOLIO OF TRACKWORK PLANS))
1012-1996 Manganese Castings Internal Soundness Severity Levels ((See AREMA PORTFOLIO OF TRACKWORK PLANS))
1014-1996 Manganese Castings Internal Soundness Severity Levels ((See AREMA PORTFOLIO OF TRACKWORK PLANS))
1015-1996 Manganese Castings Internal Soundness Severity Levels ((See AREMA PORTFOLIO OF TRACKWORK PLANS))
1016-1996 Manganese Castings Internal Soundness Severity Levels ((See AREMA PORTFOLIO OF TRACKWORK PLANS))

Lithuanian Standards Office , degree

LST EN 15843-2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
LST EN 12575-2001 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
LST EN 1620-2000 Biotechnology - Large-scale process and production - Plant building according to the degree of hazard

CEN - European Committee for Standardization, degree

EN 15843:2010 Water quality - Guidance standard on determining the degree of modification of river hydromorphology
EN 16870:2017 Water quality - Guidance standard on determining the degree of modification of lake hydromorphology

Jilin Provincial Standard of the People's Republic of China, degree

DB22/T 2245-2015 Determination method for assessing degree of humification of peat and organic soils

Society of Automotive Engineers (SAE), degree

SAE ARP5891-2008 Achieving Cleanliness Standards for Aircraft Hydraulic Systems During Manufacture

Government Electronic & Information Technology Association, degree

GEIA EIA-555-1989 Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Levels (SQL) in PPM Annex to SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications [Replaced: GE

PT-IPQ, degree

NP 3052-1991 Textiles Fabrics. Determination of the dimensional changes. Action of free-steam

IT-UNI, degree

International Electrotechnical Commission (IEC), degree

IEC 60721-1:1990/AMD2:1995 Classification of environmental conditions - Part 1: Environmental parameters and their severities
IEC 60721-1:1990 Classification of environmental conditions; part 1: environmental parameters and their severities
IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV Classification of environmental conditions - Part 1: Environmental parameters and their severities
IEC 60721-1:2002 Classification of environmental conditions - Part 1: Environmental parameters and their severities

European Association of Aerospace Industries, degree

AECMA PREN 2831-1990 Aerospace Series Hydrogen Embrittlement of Steels Test by Slow Bending Edition 1

International Telecommunication Union (ITU), degree

ITU-R REPORT BT.959-2-1990 Experimental results relating picture quality to objective magnitude of impairment

CENELEC - European Committee for Electrotechnical Standardization, degree

HD 478.1 S2-1994 Classification of Environmental Conditions Part 1: Environmental Parameters and Their Severities

The American Road & Transportation Builders Association, degree

AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures

AASHTO - American Association of State Highway and Transportation Officials, degree

T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures

NO-SN, degree

NS 5911-1988 Hydraulic fluid power - Fluids - Method for coding level of contamination by solid particles

GOSTR, degree

GOST 34397-2018 The meat products. Assessment of identity and similarity to the point of confusion invented names

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., degree

ASHRAE 3694-1993 Demonstration of a High- Temperature Heat Pump for Minimizing Liquid Indutrial Waste

IETF - Internet Engineering Task Force, degree

RFC 7471-2015 OSPF Traffic Engineering (TE) Metric Extensions

TR-TSE, degree

TS 969-1971 DEGREE OF DETERIORATION OF SULPHUR—DYED TEXTILES MATERIALS UNDER NORMAL STORAGE CONDITIONS

IN-BIS, degree

IS 13736 Pt.1-1993 Classification of Environmental Conditions Part 1 Classification of Environmental Parameters and Their Severities

Professional Standard - Chemical Industry, degree

HG 20660-2000 Classification of Toxicity Hazards and Explosion Hazards of Chemical Mediums in Pressure Vessels
HG 20660-2000（编制说明） Classification of Toxicity Hazards and Explosion Hazards of Chemical Mediums in Pressure Vessels

Professional Standard - Geology, degree

DZ/T 0340-2020 Requirements for the degree of test and research on technical performance of mineral exploration ore processing, beneficiation and smelting