ZH
RU
ES

solid trace moisture

solid trace moisture, Total:498 items.

In the international standard classification, solid trace moisture involves: Thermodynamics and temperature measurements, Water quality, Electrical accessories, Fuels, Analytical chemistry, Products of the chemical industry, Sugar. Sugar products. Starch, Physics. Chemistry, Tea. Coffee. Cocoa, Vocabularies, Fertilizers, Raw materials for rubber and plastics, Milk and milk products, Fluid power systems, Hydraulic fluids, Coals, Structures of buildings, Inorganic chemicals, Organic chemicals, Switchgear and controlgear, Hydraulic energy engineering, Equipment for the chemical industry, Industrial automation systems, Linear and angular measurements, Particle size analysis. Sieving, Air quality, Non-ferrous metals, Plastics, Paints and varnishes, Protective equipment, Microbiology, Radiation measurements, Wastes, Test conditions and procedures in general, Insulating materials, Cereals, pulses and derived products, Chocolate, Quantities and units, Metrology and measurement in general, Beverages, Non-metalliferous minerals, Aerospace fluid systems and components, Dentistry, Burners. Boilers, Energy and heat transfer engineering in general, Conducting materials, Construction materials.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, solid trace moisture

GB/T 33907-2017 Electrolytic solid moisture meter
GB/T 5832.2-2016 Gas analysis—Determination of water—Part 2: Dew point method
GB/T 5832.1-2016 Gas analysis—Determination of water—Part 1: Electrolytic method
GB/T 35924-2018 Determination of moisture in solid chemical products－Thermogravimetry method
GB/T 35679-2017 Measuring method for electromagnetic parameters of solid materials at microwave frequencies using waveguide

Standard Association of Australia （SAA）, solid trace moisture

AS 3550.4:1990 Waters - Determination of solids - Gravimetric method
ISO 18134-3:2023 Solid biofuels — Determination of moisture content — Part 3: Moisture in general analysis sample
AS 4276.23:2016 Water microbiology, Method 23: Soils, sediments, sludges, slurries and bio-solids — Procedures for sample preparation

International Organization for Standardization (ISO), solid trace moisture

ISO/DIS 16094-2:2011 Water quality — Analysis of microplastic in water — Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water
ISO/DIS 7383 Fine bubble technology — Evaluation method for determining oxygen content in fine bubble dispersions in water
ISO 8189:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure
ISO/TS 11725:2002 Solid mineral fuels - Determination of nitrogen - Semi-micro gasification method
ISO 8851-2:2004 | IDF 191-2:2004 Butter — Determination of moisture, non-fat solids and fat contents (Routine methods) — Part 2: Determination of non-fat solids content
ISO 4406:1987 Hydraulic fluid power; Fluids; Method for coding level of contamination by solid particles
ISO 7513:1990 Instant tea in solid form; determination of moisture content (loss in mass at 103 °C)
ISO 8851-2:2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 2: Determination of non-fat solids content
ISO 8851-2:2004|IDF 191-2:2004 Butter — Determination of moisture, non-fat solids and fat contents (Routine methods) — Part 2: Determination of non-fat solids content
ISO 3727-2:2001|IDF 80-2:2001 Butter — Determination of moisture, non-fat solids and fat contents — Part 2: Determination of non-fat solids content (Reference method)
ISO 3727-2:2001 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method)
ISO 18134-1:2022 Solid biofuels — Determination of moisture content — Part 1: Reference method
ISO 8851-1:2004 | IDF 191-1:2004 Butter — Determination of moisture, non-fat solids and fat contents (Routine methods) — Part 1: Determination of moisture content
ISO 3727-1:2001 | IDF 80-1:2001 Butter — Determination of moisture, non-fat solids and fat contents — Part 1: Determination of moisture content (Reference method)
ISO 18134-2:2017 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
ISO 18134-1:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
ISO 18134-2:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
ISO 8851-1:2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 1: Determination of moisture content
ISO 8851-1:2004|IDF 191-1:2004 Butter — Determination of moisture, non-fat solids and fat contents (Routine methods) — Part 1: Determination of moisture content
ISO 3727-1:2001|IDF 80-1:2001 Butter — Determination of moisture, non-fat solids and fat contents — Part 1: Determination of moisture content (Reference method)
ISO 3727-1:2001 Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method)
ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption
ISO 8190:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying at (105 plus or minus 2) degrees C
ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
ISO 3727-3:2003 | IDF 80-3:2003 Butter — Determination of moisture, non-fat solids and fat contents — Part 3: Calculation of fat content
ISO 751:1981 Fruit and vegetable products; Determination of water-insoluble solids content
ISO/CD 16965:2023 Environmental solid matrices — Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
ISO 3727-3:2003|IDF 80-3:2003 Butter — Determination of moisture, non-fat solids and fat contents — Part 3: Calculation of fat content
ISO 3727-3:2003 Butter - Determination of moisture, not-fat solids and fat contents - Part 3: Calculation of fat content
ISO 19403-5:2017 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 8851-3:2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 3: Calculation of fat content
ISO 8851-3:2004 | IDF 191-3:2004 Butter — Determination of moisture, non-fat solids and fat contents (Routine methods) — Part 3: Calculation of fat content
ISO 8851-3:2004|IDF 191-3:2004 Determination of moisture, non-fat solids and fat content of butter (conventional method) Part 3: Determination of fat content
ISO 80000-12:2009 Quantities and units - Part 12: Solid state physics
ISO 18122:2015 Solid biofuels - Determination of ash content
ISO 31-13:1992 Quantities and units; part 13: solid state physics
ISO 21656:2021 Solid recovered fuels - Determination of ash content
ISO 18122:2022 Solid biofuels — Determination of ash content
ISO 15901-2:2006/cor 1:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption; Technical Corrigendum 1
ISO/AWI 9917-1 Dentistry — Water-based cements — Part 1: Part 1: Powder/liquid acid-base cements
ISO 18123:2015 Solid biofuels - Determination of the content of volatile matter
ISO 18123:2023 Solid biofuels — Determination of volatile matter

Professional Standard - Electron, solid trace moisture

SJ/T 9560.19-1993 Sealed solid micro-relay--Quality grading standard

Professional Standard - Nuclear Industry, solid trace moisture

EJ/T 296.1-1987 Analytical method of trace uranium in urine solid fluorescence method
EJ 194.2-1982 Environmental samples.Method for analyzing total trace of mercury in water

RU-GOST R, solid trace moisture

GOST R 54214-2010 Solid biofuels. Determination of minor elements
GOST R 54214-2015 Solid biofuels. Determination of minor elements
GOST R 54214-2015(2019) Solid biofuels. Determination of minor elements
GOST R 54239-2010 Solid mineral fuels. Selection of methods for the determination of trace elements
GOST R 54239-2018 Solid mineral fuels. Selection of methods for the determination of trace elements
GOST 32975.2-2014 Solid biofuels. Determination of moisture content. Oven dry method. Part 2. Total moisture. Simplified method
GOST 18164-1972 Drinking water. Method for determination of total solids content
GOST R 52911-2013 Solid mineral fuel. Determination of total moisture
GOST R 54186-2010 Solid biofuels. Determination of moisture content by oven dry method. Part 1. Total moisture. Reference method
GOST R 54192-2010 Solid biofuels. Determination of moisture content. Oven dry method. Part 2. Total moisture. Simplified method
GOST R 54186-2010(2019) Solid biofuels. Determination of moisture content by oven dry method. Part 1. Total moisture. Reference method
GOST 27314-1991 Solid mineral fuel. Determination of moisture
GOST R 54231-2010 Solid recovered fuels. Determination of moisture content using the oven drying. Part 1. Total moisture. Reference method
GOST R 54232-2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 2. Total moisture. Simplified method
GOST R 54231-2010(2019) Solid recovered fuels. Determination of moisture content using the oven drying. Part 1. Total moisture. Reference method
GOST R 54232-2010(2019) Solid recovered fuels. Determination of moisture content using the oven dry method. Part 2. Total moisture. Simplified method
GOST 32975.3-2014 Solid biofuels. Determination of moistire content by drying. Part 3. Moisture in general analysis sample
GOST R 54211-2010 Solid biofuels. Determination of moisture content by oven dry method. Part 3. Moisture in general analysis sample
GOST EN 12048-2013 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 ± 2) °C
GOST 33512.3-2015 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
GOST EN ISO 13982-1-2012 Occupational safety standards system. Protective clothing for use against solid particulates. Part 1. Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
GOST EN 12049-2013 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric metod by drying under pressure
GOST 5900-2014 Sonfectionery. Methods for determination of moisture and solids
GOST R 52911-2008 Solid mineral fuels. Methods for determination of total moisture
GOST R 8.681-2009 State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials
GOST R 55112-2012 Solid biofuels. Determination of the water soluble chloride, sodium and potassium content
GOST R 54233-2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
GOST 33623-2015 Solid mineral fuel. Method for determination of equilibrium moisture
GOST 33511-2015 Solid recovered fuel. Determination of ash content
GOST 32988-2014 Solid biofuels. Determination of ash content
GOST R 54185-2010 Solid biofuels. Determination of ash content
GOST 33503-2015 Solid mineral fuel. Methods for determination of moisture in the analysis sample
GOST R 54184-2010 Solid biofuels. Determination of the content of volatile matter

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, solid trace moisture

GB/T 5832.2-1986 Determination of trace water in the gases--Dew point method
GB/T 5832.2-2008 Determination of moisture in gases.Part 2: Dew point method
GB/T 6768-1986 Methods of analyzing microquantity of uranium in water
GB/T 5832.3-2011 Determination of moisture in gases.Part 3:The method of Cavity Ring-Down Spectroscopy
GB/T 26793-2011 Coulometry micro water teller
GB/T 25154-2010 Capacitive liquid phase trace moisture meter
GB 4120.4-1983 Liquid chlorinated methanes for industrial use--Determination of micro-amounts of water(Karl Fischer method)
GB/T 4120.5-1992 Liquid chlorinated methanes for industrial use--Determination of micro-amounts of water(cloud point method)
GB/T 17766-1999 Classification for resources/reserves of solid fuels and mineral commodities
GB/T 17473.1-2008 Test method of precious metals pastes used for microelectronics.Determination of solids content
GB/T 15893.4-1995 Industrial circulating cooling water--Determination of dissolved matter--Gravimetric method
GB/T 42843.1-2023 Micro-bubble technology measurement sampling and sample preparation Part 1: Ultra-fine bubble water dispersion system
GB/T 17473.1-1998 Test methods of precious metal pastes used for thick film microelectronics--Determination of solids content
GB/T 28733-2012 Determination of total moisture for solid biofuels
GB/T 7376-2008 Determination of micro-amounts of water in industrial fluorinated alkane
GB/T 7374-1987 Fluorinated methanes for industrial uses--Determination of micro-amounts of water--Gavimetri method
GB 7374-1987 Fluorinated methanes for industrial uses－Determination of micro－mounts of water－Gravimetric method
GB/T 14415-1993 Analysis of water used in boiler and cooling system. Determination of solids matter
GB/T 5074-1985 Coking products--Determination of moisture content--Microcoulomb method

AR-IRAM, solid trace moisture

IRAM 15 702-1963

German Institute for Standardization, solid trace moisture

DIN 22022-2:2001-02 Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES
DIN 22022-7:2014-07 Solid fuels - Determination of contents of trace elements - Part 7: ICP-MS
DIN EN ISO 16968:2015-09 Solid biofuels - Determination of minor elements (ISO 16968:2015); German version EN ISO 16968:2015
DIN 51718:2002-06 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN EN ISO 3727-2:2002-04 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001); German version EN ISO 3727-2:2001
DIN EN ISO 18134-2:2023-04 Solid biofuels - Determination of moisture content - Part 2: Total moisture - Simplified method (ISO/DIS 18134-2:2023); German and English version prEN ISO 18134-2:2023 / Note: Date of issue 2023-03-24*Intended as replacement for DIN EN ISO 18134-2 (20...
DIN 51722-1:1990-07 Testing of solid fuels; determination of nitrogen content; semi-micro Kjeldahl method
DIN EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001); German version EN ISO 3727-2:2001
DIN 51904:2012-11 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN 51904:1981 Testing of carbon materials; determination of water content; solid matters
DIN ISO 8851-1:2020-12 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 1: Determination of moisture content (ISO 8851-1:2004)
DIN EN ISO 3727-1:2002-04 Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001); German version EN ISO 3727-1:2001
DIN EN ISO 18134-2:2017-05 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017); German version EN ISO 18134-2:2017
DIN EN ISO 18134-1:2023-01 Solid biofuels - Determination of moisture content - Part 1: Reference method (ISO 18134-1:2022); German version EN ISO 18134-1:2022
DIN EN ISO 3727-1:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001); German version EN ISO 3727-1:2001
DIN 22022-3:2001-02 Solid fuels - Determination of trace elements - Part 3: AAS-flame method
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51719:1997 Testing of solid fuels - Solid mineral fuels - Determination of ash content
DIN 51722-1:1990 Testing of solid fuels; determination of nitrogen content; semi-micro Kjeldahl method
DIN 51904:2012 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN EN ISO 18134-3:2022-07 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO/DIS 18134-3:2022); German and English version prEN ISO 18134-3:2022 / Note: Date of issue 2022-06-03*Intended as replacement for DIN...
DIN EN ISO 18134-3:2015-12 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO 18134-3:2015); German version EN ISO 18134-3:2015 / Note: To be replaced by DIN EN ISO 18134-3 (2022-07).
DIN EN ISO 18134-2:2023 Solid biofuels - Determination of moisture content - Part 2: Total moisture - Simplified method (ISO/DIS 18134-2:2023); German and English version prEN ISO 18134-2:2023
DIN 22022-5:2001-02 Solid fuels - Determination of trace elements - Part 5: Atomic absorption spectrometry applying the electrothermal atomization
DIN EN ISO 21660-3:2021-06 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021); German version EN ISO 21660-3:2021
DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
DIN 51719:1997-07 Testing of solid fuels - Solid mineral fuels - Determination of ash content
DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN ISO 8851-1:2020 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 1: Determination of moisture content (ISO 8851-1:2004)
DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN CEN/TS 15414-1:2010-10*DIN SPEC 1124:2010-10 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method; German version CEN/TS 15414-1:2010
DIN CEN/TS 15414-2:2010-10*DIN SPEC 1125:2010-10 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture by a simplified method; German version CEN/TS 15414-2:2010
DIN EN ISO 18134-1:2023 Solid biofuels - Determination of moisture content - Part 1: Reference method (ISO 18134-1:2022)
DIN EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003); German version EN ISO 3727-3:2003
DIN EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015); German version EN ISO 16968:2015
DIN 10743:2013 Analysis of honey - Determination of water-insoluble solids
DIN 58942-6:2008 Medical microbiology - Culture media - Part 6: Solid chromogenic culture media; Text in German and English
DIN 58942-6:2008-01 Medical microbiology - Culture media - Part 6: Solid chromogenic culture media; Text in German and English
DIN ISO 5884:1989 Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
DIN EN 12049:1996-11 Solid fertilizers and liming material - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992, modified); German version EN 12049:1996
DIN EN ISO 3727-3:2003-07 Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003); German version EN ISO 3727-3:2003
DIN EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample; German version EN 15414-3:2011
DIN EN ISO 18122:2023-02 Solid biofuels - Determination of ash content (ISO 18122:2022); German version EN ISO 18122:2022
DIN EN ISO 21656:2021-06 Solid recovered fuels - Determination of ash content (ISO 21656:2021); German version EN ISO 21656:2021
DIN EN ISO 21660-3:2020 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO/DIS 21660-3:2019); German and English version prEN ISO 21660-3:2019
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN EN 14774-1:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method; German version EN 14774-1:2009
DIN EN 14774-2:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method; German version EN 14774-2:2009
DIN 10172-3:2023-06 Microbiological analysis of milk - Determination of coliforms - Part 3: Method with solid medium
DIN 22022-4:2001-02 Solid fuels - Determination of contents of trace elements - Part 4: Atomic absorption spectrometry applying the flameless hydride system or the cold-vapour-method

British Standards Institution (BSI), solid trace moisture

BS DD CEN/TS 15297:2006 Solid biofuels - Determination of minor elements
DD CEN/TS 15297:2006 Solid Biofuels — Determination of minor elements
BS EN ISO 16968:2015 Solid biofuels. Determination of minor elements
BS EN ISO 18134-1:2015 Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Reference method
BS EN 14774-1:2009 Solid biofuels - Determination of moisture content - Oven dry method - Total moisture - Reference method
BS EN 14774-1:2010 Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Reference method
BS EN 15414-3:2011 Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
BS EN ISO 18134-2:2015 Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Simplified method
BS EN 14774-2:2009 Solid biofuels - Determination of moisture content - Oven dry method - Total moisture - Simplified method
BS EN 14774-2:2010 Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Simplified method
DD CEN/TS 15414-2:2010 Solid recovered fuels. Determination of moisture content using the oven dry method - Determination of total moisture content by a simplified method
BS EN 14774-3:2009 Solid biofuels - Determination of moisture content - Oven dry method - Moisture in general analysis sample
BS EN 14774-3:2010 Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
BS EN ISO 18134-3:2015 Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
BS 6986-3:1990+A1:2012 Instant tea in solid form. Determination of moisture content (loss in mass at 103°)
DD CEN/TS 15414-1:2006 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 1: Determination of total moisture by a reference method
DD CEN/TS 15414-3:2006 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample
BS ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Analysis of micropores by gas adsorption
BS DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Moisture in general analysis sample
BS EN ISO 18134-2:2017 Tracked Changes. Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Simplified method
BS EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Determination of non-fat solids content (Reference method)
BS EN ISO 21660-3:2021 Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
23/30465643 DC BS EN ISO 18134-2. Solid biofuels. Determination of moisture content - Part 2. Total moisture. Simplified method
BS ISO 15901-2:2006(2007) Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS ISO 15901-2:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
DD CEN/TS 15414-1:2010 Solid recovered fuels. Determination of moisture content using the oven dry method - Determination of total moisture by a reference method
BS DD CEN/TS 14774-1:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Total moisture - Reference method
BS DD CEN/TS 14774-2:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Total moisture - Simplified method
DD CEN/TS 14774-1:2004 Solid biofuels - Methods for determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
DD CEN/TS 14774-2:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
21/30439833 DC BS ISO 18134-1. Solid biofuels. Determination of moisture content. Oven dry method. Part 1. Total moisture. Reference method
BS EN 12049:1997(2011) Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure
BS EN 12049:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure
BS DD CEN/TS 15414-3:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Moisture in general analysis sample
BS EN ISO 3727-1:2002 Butter - Determination of moisture, non-fat solids and fat contents - Determination of moisture content (Reference method)
DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
BS EN 15403:2011 Solid recovered fuels. Determination of ash content
22/30439841 DC BS ENI SO 18134-3. Solid biofuels. Determination of moisture content. Oven dry method - Part 3. Moisture in general analysis sample
BS EN 14775:2009 Solid biofuels - Determination of ash content
BS EN 14775:2010 Solid biofuels. Determination of ash content
BS EN ISO 21656:2021 Solid recovered fuels. Determination of ash content
BS EN ISO 18122:2022 Solid biofuels. Determination of ash content
19/30369425 DC BS EN ISO 21660-3. Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
BS DD CEN/TS 15105:2006 Solid biofuels - Methods for determination of the water soluble content of chloride, sodium and potassium
BS DD CEN/TS 15105:2005 Solid biofuels — Methods for determination of the water soluble content of chloride, sodium and potassium
BS EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Calculation of fat content
BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
BS ISO 11722:2013 Solid mineral fuels. Hard coal. Determination of moisture in the general analysis test sample by drying in nitrogen

Association Francaise de Normalisation, solid trace moisture

NF X34-123*NF EN ISO 16968:2015 Solid biofuels - Determination of minor elements
NF EN ISO 16968:2015 Biocombustibles solides - Détermination des éléments mineurs
NF V04-392-2*NF EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 2 : determination of non-fat solids contents (reference method)
NF ISO 22262-2:2014 Qualité de l'air - Matériaux solides - Partie 2 : dosage quantitatif de l'amiante en utilisant les méthodes gravimétrique et microscopique
NF X34-106-1:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 1 : total moisture - Reference method.
NF V05-321*NF ISO 7513:1991 Instant tea in solid form. Determination of moisture content (loss in mass at 103 degrees celsius).
NF V04-319-2*NF ISO 8851-2:2004 Butter - Determination of moisture, non-fat solids and fat contents (routine methods) - Part 2 : determination of non-fat solids content
NF X34-106-2:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 2 : total moisture - Simplified method.
NF ISO 8851-2:2004 Beurre - Détermination des teneurs en eau, en matière sèche non grasse et en matière grasse (méthodes de routine) - Partie 2 : détermination de la teneur en matière sèche non grasse
NF M03-002:1995 Combustibles minéraux solides - Détermination de l'humidité
NF ISO 7513:1991 Thé soluble sous forme solide - Détermination de la teneur en eau (perte de masse à 103 degrés Celsius)
NF V04-319-1*NF ISO 8851-1:2004 Butter - Determination of moisture, non-fat solids and fat contents (routine methods) - Part 1 : determination of moisture content
NF ISO 8851-1:2004 Beurre - Détermination des teneurs en eau, en matière sèche non grasse et en matière grasse (méthodes de routine) - Partie 1 : détermination de la teneur en eau
NF X34-106-3:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3 : moisture in general analysis sample.
NF X34-106-1*NF EN ISO 18134-1:2016 Solid biofuels - Determination of moisture content - Oven dry method - Part 1 : total moisture - Reference method
NF X34-106-2*NF EN ISO 18134-2:2017 Solid biofuels - Determination of moisture content - Oven dry method - Part 2 : total moisture - Simplified method
NF V04-392-1*NF EN ISO 3727-1:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 1 : determination of moisture content (reference method).
NF X34-201-3*NF EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3 : moisture in general analysis sample
NF EN ISO 18134-3:2015 Biocombustibles solides - Méthodes de détermination de la teneur en humidité - Méthode de séchage à l'étuve - Partie 3 : humidité de l'échantillon pour analyse générale
NF V04-392-3*NF EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat-solids and fat contents - Part 3 : calculation of fat content.
NF X34-106-3*NF EN ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3 : moisture in general analysis sample
NF M03-028:2003 Solid mineral fuels - Determination of moisture content of coke.
NF EN ISO 18134-1:2022 Biocombustibles solides - Dosage de la teneur en humidité - Méthode de séchage à l'étuve - Partie 1 : Méthode de référence
NF V76-123*NF EN 12143:1996 Fruit and vegetable juices. Estimation of soluble solids content. Refractometric method.
NF EN ISO 16995:2015 Biocombustibles solides - Détermination de la teneur en chlore, sodium et potassium solubles dans l'eau
NF U42-411*NF EN 12048:1997 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 + or - 2) degrees C;.
NF X43-017:1984 Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.
NF V04-319-3*NF ISO 8851-3:2004 Butter - Determination of moisture, non-fat solids and fat contents (routine methods) - Part 3 : calculation of fat content
NF X02-300-12:2013 Quantities and units - Part 12: solid state physics
NF X34-108:2010 Solid biofuels - Determination of ash content.
NF X34-212:2011 Solid recovered fuels - Determination of ash content.
NF X34-108*NF EN ISO 18122:2015 Solid biofuels - Determination of ash content
NF X02-213:1992 Quantities and units. Part 12 : solid state physics.
NF M03-003:1994 Solid mineral fuels. Determination of ash content.
NF X34-212*NF EN ISO 21656:2021 Solid recovered fuels - Determination of ash content
NF EN ISO 21656:2021 Combustibles solides de récupération - Détermination de la teneur en cendres
NF EN ISO 18122:2022 Biocombustibles solides - Détermination de la teneur en cendres
NF EN 12049:1997 Engrais solides et amendements calciques et/ou magnésiens - Détermination de la teneur en eau - Méthode gravimétrique par séchage sous pression réduite.
NF E48-660:1991 Hydraulic fluid systems. Fluids. Determination of solid particulate contamination by optical microscope and image analysis.

ZA-SANS, solid trace moisture

SANS 5213:2005 Water - Dissolved solids content
SANS 6049:2004 Water - Suspended solids content
SANS 131:1997 Solid mineral fuels - Determination of ash content

CEN - European Committee for Standardization, solid trace moisture

PD CEN/TS 15297:2006 Solid Biofuels - Determination of minor elements
PD CEN/TS 15414-3:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
PD CEN/TS 15414-1:2006 Solid recovered fuels Determination of moisture content using the oven dry method Part 1: Determination of total moisture by a reference method
PD CEN/TS 14774-1:2004 Solid biofuels - Methods for determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
PD CEN/TS 14774-2:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
PD CEN/TS 15414-2:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture by a simplified method
PD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample

Korean Agency for Technology and Standards (KATS), solid trace moisture

KS M ISO 16968:2021 Solid biofuels — Determination of minor elements
KS H ISO 7513-2007(2012) Instant tea in solid form－Determination of moisture content (loss in mass at 103 ℃)
KS H ISO 3727-2-2006(2016) Butter－Determination of moisture, non-fat solids and fat contents－Part 2：Determination of non-fat solids content(Reference method)
KS H ISO 7513-2007(2021) Instant tea in solid form－Determination of moisture content (loss in mass at 103 ℃)
KS B ISO 4406:2008 Hydraulic fluid power-Fluids-Method for coding the level of contamination by solid particles
KS H ISO 7513:2007 Instant tea in solid form－Determination of moisture content (loss in mass at 103 ℃)
KS H ISO 3727-2:2006 Butter－Determination of moisture, non-fat solids and fat contents－Part 2：Determination of non-fat solids content(Reference method)
KS H ISO 3727-2:2021 Butter — Determination of moisture, non-fat solids and fat contents — Part 2: Determination of non-fat solids content (Reference method)
KS H ISO 3727-1:2021 Butter — Determination of moisture, non-fat solids and fat contents — Part 1: Determination of moisture content (Reference method)
KS H ISO 3727-1-2006(2016) Butter－Determination of moisture, non-fat solids and fat contents－Part 1：Determination of moisture content(Reference method)
KS H ISO 3727-1:2006 Butter－Determination of moisture, non-fat solids and fat contents－Part 1：Determination of moisture content(Reference method)
KS M ISO 18134-1:2021 Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference method
KS M 1993-3-2022 Determination of emissive organic compounds in solid and/or semi-solid products — Part 3: Volatile organic compounds — Micro-scale chamber method
KS H ISO 3727-3:2021 Butter — Determination of moisture, non-fat solids and fat contents — Part 3: Calculation of fat content
KS H ISO 3727-3-2006(2016) Butter－Determination of moisture, non-fat solids and fat contents－Part 3：Calculation of fat content
KS H ISO 3727-3:2006 Butter－Determination of moisture, non-fat solids and fat contents－Part 3：Calculation of fat content
KS A ISO 31-13-2001(2006) Quantities and units－Part 13：Solid state physics
KS C IEC 60127-5:2003 Miniature fuses－Part 5：Guidelines for quality assessment of miniature fuse-links
KS I 2207-2009 Testing methods for determination of trace components in diluent gas and zero gas
KS E ISO 1171:2002 Solid mineral fuels－Determination of ash content
KS M ISO 18122:2021 Solid biofuels — Determination of ash content
KS M 0038-1993 Testing methods for determination of trace components in diluent gas and zero gas
KS W ISO 5884:2007 Aerospace－Fluid systems and components－Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
KS A ISO 80000-12:2012 Quantities and units－Part 12：Solid state physics
KS E ISO 1171-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method

KR-KS, solid trace moisture

KS M ISO 16968-2021 Solid biofuels — Determination of minor elements
KS H ISO 7513-2022 Instant tea in solid form — Determination of moisture content (loss in mass at 103 ℃℃)
KS H ISO 3727-2-2021 Butter — Determination of moisture, non-fat solids and fat contents — Part 2: Determination of non-fat solids content (Reference method)
KS H ISO 3727-1-2021 Butter — Determination of moisture, non-fat solids and fat contents — Part 1: Determination of moisture content (Reference method)
KS M ISO 18134-1-2021 Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference method
KS H ISO 3727-3-2021 Butter — Determination of moisture, non-fat solids and fat contents — Part 3: Calculation of fat content
KS M ISO 18122-2021 Solid biofuels — Determination of ash content

ES-UNE, solid trace moisture

UNE-EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)
ISO/DIS 18134-2:2023 Solid biofuels — Determination of moisture content — Part 2: Simplified method to measure total moisture
UNE-EN ISO 18134-3:2016 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO 18134-3:2015)
UNE-EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
UNE-EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN ISO 21656:2021 Solid recovered fuels - Determination of ash content (ISO 21656:2021)
UNE-EN ISO 18122:2023 Solid biofuels - Determination of ash content (ISO 18122:2022)

国家市场监督管理总局、中国国家标准化管理委员会, solid trace moisture

GB/T 5832.4-2020 Gas analysis—Determination of moisture—Part 4: The method of quartz crystal oscillation
GB/T 17766-2020 Classifications for mineral resources and mineral reserves

Indonesia Standards, solid trace moisture

SNI 06-6989.3-2004 Water and waste water - Part 3: Test methods of total suspended solid (TSS) by gravimetry
SNI 06-6989.26-2005 Water and wastewater - Part 26: Test methods of total solid content by gravimetric analysis
SNI 06-6989.27-2005 Water and wastewater - Part 27: Test methods of total dissolved solid content by gravimetric analysis

化学工业部, solid trace moisture

HG 2299-1992 Determination of total solid content of rubber compound aqueous dispersion

IN-BIS, solid trace moisture

IS 13859-1993 Instant Tea in Solid Form - Determination of Moisture Content ( Loss in Mass at 103°C)
IS 9235-1979
IS 9234-1979

NL-NEN, solid trace moisture

NEN 6623-1988 Water - Determination of the amount of settleable solids
NEN 2509-1991 Combustion products of solid mineral fuels - Determination of the moisture content of pulverized fuel ash and bottom-ash

HU-MSZT, solid trace moisture

Lithuanian Standards Office , solid trace moisture

LST 1611-2000 Confectionery. Methods for determination moisture and total solids content
LST EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)
LST EN ISO 3727-2:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001)
LST EN 14774-2-2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
LST EN 14774-1-2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
LST EN 15414-3-2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
LST EN 14774-3-2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
LST EN ISO 3727-1:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001)
LST EN 12049-2003 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992 modified)
LST EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
LST EN 15403-2011 Solid recovered fuels - Determination of ash content
LST EN 14775-2010 Solid biofuels - Determination of ash content
LST EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003)
LST EN 60127-5-2001 Miniature fuses. Part 5: Guidelines for quality assessment of miniature fuse-links (IEC 60127-5:1988)

Professional Standard - Environmental Protection, solid trace moisture

HJ 1222-2021 Gravimetric method for determination of moisture and dry matter content of solid waste

Professional Standard - Chemical Industry, solid trace moisture

HG/T 2299-2001 Determination of total solid content of aqueous dispersion - Rubber compounding material
HG/T 3920-2006 Capacitive liquid moisture detector
HG/T 2481-2011 Explosion proof electrolytic gas moisture detector
HG/T 4376-2012 On line laser trace moisture analyzer for chemical industry

CU-NC, solid trace moisture

NC 84-10-1986 Mineral Waters. Determination of the Content of Dissolved Total Solid Substances

European Committee for Standardization (CEN), solid trace moisture

EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)
EN 14774-1:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
EN 14774-2:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
EN ISO 3727-2:2001 Butter - Determination of Moisture, Non-Fat Solids and Fat Contents - Part 2: Determination of Non-Fat Solids Content (Reference Method)
EN ISO 18134-1:2022 Solid biofuels - Determination of moisture content - Part 1: Reference method (ISO 18134-1:2022)
prEN ISO 18134-2 Solid biofuels - Determination of moisture content - Part 2: Total moisture - Simplified method (ISO/DIS 18134‑2:2023)
EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
EN 14774-3:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
CEN/TS 15414-2:2010 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture content by a simplified method
EN ISO 18134-3:2023 Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
FprEN ISO 18134-3 Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO/FDIS 18134-3:2023)
EN ISO 3727-1:2001 Butter - Determination of Moisture, Non-Fat Solids and Fat Contents - Part 1: Determination of Moisture Content (Reference Method)
EN ISO 18134-1:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method (ISO 18134-1:2015)
EN ISO 18134-2:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2015)
CEN/TS 15414-1:2010 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method
EN ISO 19403-5:2020 Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
EN ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method Part 3: Moisture in general analysis sample
PD CEN/TS 15414-1:2010 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method
PD CEN/TS 15414-2:2010 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture content by a simplified method
prEN ISO 18134-1:2021 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method (ISO/DIS 18134-1:2021)
EN ISO 80000-12:2019 Quantities and units - Part 12: Condensed matter physics (ISO 80000-12:2019, Corrected version 2021-11)
EN ISO 21656:2021 Solid recovered fuels - Determination of ash content (ISO 21656:2021)
EN 15403:2011 Solid recovered fuels - Determination of ash content
EN ISO 80000-12:2013 Quantities and units - Part 12: Solid state physics
EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content
EN 60127-5:1991 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links (IEC 127-5:1988)
EN ISO 18123:2023 Solid biofuels - Determination of volatile matter (ISO 18123:2023)

Canadian Standards Association (CSA), solid trace moisture

CAN/CSA-ISO 16968:2015 Solid biofuels - Determination of minor elements (First Edition)
CAN/CSA-ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (First Edition)
CAN/CSA-ISO 18122:2016 Solid biofuels - Determination of ash content

PT-IPQ, solid trace moisture

NP 3844-1989 COMBUST?VEIS S?LIDOS Carv?es Determina??o da humidade total. Método ISO
NP 1014-1987
NP 4373-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ASTM method)
NP 4323-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ISO method)
NP 1011-1989 SOLID FUELS Coals Determination of moisture in the analysis sample Direct gravimetric method ISO method
NP 4372-1999 Solid fuels Coals and cokes Determination of moisture in the analysis sample by the indirect gravimetric method (ASTMmethod)

中华人民共和国环境保护部, solid trace moisture

GB 6768-1986 Methods of analysing microquantity of uranium in water

AT-ON, solid trace moisture

ONORM ISO 4406:1991 Hydraulic fluid power — Fluids — Method for coding level of contamination by solidparticles
OENORM EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)

Danish Standards Foundation, solid trace moisture

DS/ISO 4406:1989 Hydraulic fluid power. Fluids. Method for coding level of contamination by solid particles
DS/EN ISO 3727-2:2003 Butter - Determination of moisture, non-fat solids and fat contents (Reference method) - Part 2: Determination of non-fat solids content
DS/ISO 8851-2:2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 2: Determination of non-fat solids content
DS/EN ISO 3727-1:2003 Butter - Determination of moisture, non-fat solids and fat contents (Reference method) - Part 1: Determination of moisture content
DS/ISO 8851-1:2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 1: Determination of moisture content
DS/EN 12049:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure
DS/ISO 21660-3:2021 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample
DS/EN 14774-1:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method
DS/EN 14774-2:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method
DS/CEN/TS 15414-2:2010 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture content by a simplified method
DS/EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
DS/EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content
DS/EN 14774-3:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
DS/EN ISO 21660-3:2021 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
DS/CEN/TS 15414-1:2010 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method
DS/EN 12048:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 +/- 2) °C
DS/EN 15403:2011 Solid recovered fuels - Determination of ash content
DS/ISO 21656:2021 Solid recovered fuels – Determination of ash content
DS/EN 14775:2010 Solid biofuels - Determination of ash content
DS/EN ISO 9917-1:2008 Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements
DS/ISO 8851-3:2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 3: Calculation of fat content

International Dairy Federation (IDF), solid trace moisture

IDF 80-2-2001 Butter - Determination of moisture, non-fat solids and fat contents - Part 2:Determination of non-fat solids content (Reference method)
IDF 191-2-2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 2: Determination of non-fat solids content
IDF 80-1-2001 Butter - Determination of moisture, non-fat solids and fat contents - Part 1:Determination of moisture content (Reference method)
IDF 191-1-2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 1: Determination of moisture content
IDF 80-3-2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 3:Calculation of fat content
IDF 191-3-2004 Butter - Determination of moisture, non-fat solids and fat contents (Routine methods) - Part 3: Calculation of fat content

RO-ASRO, solid trace moisture

STAS 5264-1986 SOLID FUELS Moisture determination
STAS SR ISO 8189:1995 Solid fertilizers - Determination of moisture content - Gravimetric method by drying under reduced pressure
STAS SR ISO 8190:1996 Solid fertilizers - Determination of moisture content - Gravimetric method by drying at (105 ± 2)°C
STAS SR 5264-1995 Mineral solid fuels Coals Moisture determination
STAS 10274/18-1975 SOLID FUELS ASH ANALYSIS Determination of hygroscopic moisture
STAS 10274/8-1988 SOLID FUELS ASH A1IALYS1S Magnesium contest determination
STAS 10274 17-1975 SOLID FUELS ASH ANALYSIS Determination of the loss on ignition
STAS 10274/11-1975 SOLID FURLS ASH ANALYSIS Determination of sulphur
STAS 10274/14-1975 SOLID FUELS ASH ANALYSIS Determination of phosphorus corlent
STAS 10274/16-1975 SOLID FUELS ASH ANALYSIS Determination of carbon content
STAS 10274/7-1988 SOLID FILLS ASH ANALYSIS Calcium content determination
STAS SR ISO 5884:1996 Aerospace - Fluid systems and components - Methods for system sampling and measuring the soiid partide contamination of hydraulic fluids

PH-BPS, solid trace moisture

PNS ASTM C1603:2021 Standard Test Method for Measurement of Solids in Water

CL-INN, solid trace moisture

GOSTR, solid trace moisture

GOST R 52911-2020 Solid mineral fuel. Determination of total moisture
GOST R 58914-2020 Solid mineral fuel. Determination of water-soluble matter content and composition

American Society for Testing and Materials (ASTM), solid trace moisture

ASTM C1603-23 Standard Test Method for Measurement of Solids in Water
ASTM C1603-16 Standard Test Method for Measurement of Solids in Water
ASTM C1603-10 Standard Test Method for Measurement of Solids in Water
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM C1603-05 Standard Test Method for Measurement of Solids in Water
ASTM UOP649-10 Total Oxygen in Solid, Semi-solid, and High Boiling Point Liquid Hydrocarbons by Pyrolysis
ASTM D6502-10(2022) Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
ASTM D5465-16 Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
ASTM D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM C836-03 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
ASTM C836-00 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

Professional Standard - Urban Construction, solid trace moisture

CJ/T 55-1999 Municipal sewage.Determination of total solid.Gravimetric method
CJ/T 52-1999 Municipal sewage.Determination of suspended solid.Gravimetric method
CJ 26.5-1991 Municipal sewage water quality inspection method Standard gravimetric method for total solids
CJ 26.2-1991 Municipal sewage water quality examination method standard gravimetric method for the determination of suspended solids

AENOR, solid trace moisture

UNE 32302:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MACERAL GROUP COMPOSITION.
UNE-EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Refernce method). (ISO 3727-2:2001)
UNE-EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
UNE-EN ISO 3727-1:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method). (ISO 3727-1:2001)
UNE 32002:1995 SOLID MINERAL FUELS. DETERMINATION OF MOISTURE IN THE ANALYSIS SAMPLE.
UNE-EN ISO 18134-2:2017 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017)
UNE-EN 12049:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992 modified)
UNE-EN 15403:2011 Solid recovered fuels - Determination of ash content
UNE-EN ISO 3727-3:2003 Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003)
UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.

Japanese Industrial Standards Committee (JISC), solid trace moisture

JIS K 0226:1983 Analytical method for trace water in diluent gas and zero gas
JIS M 8816:1992 Solid mineral fuels -- Methods of microscopical measurement for the macerals and reflectance
JIS Z 8831-3:2010 Pore size distribution and porosity of solid materials -- Part 3: Analysis of micropores by gas adsorption
JIS T 6609-1:2005 Dentistry -- Water-based cements -- Part 1: Powder/liquid Acid-base cements
JIS Z 8000-12:2016 Quantities and units -- Part 12: Solid state physics
JIS Z 8202-13:2000 Quantities and units -- Part 13: Solid state physics

PL-PKN, solid trace moisture

PN C77025-04-1991 Cosmetic and perfumery products Microbiological research by the microbiological tests Determination of the microorganisms in the solid
PN G04542-1987 Hard coal Continous measurment of moisture by microwave meter
PN A75104-1985 Fruit and vegetable products Determination of soluble solids oncontent
PN-EN ISO 21660-3-2021-08 E Solid recovered fuels -- Determination of moisture content using the oven dry method -- Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
PN G04521-1973 Solid fuels Determination of carbon and hydro-gen content by the Sheffield method

CZ-CSN, solid trace moisture

CSN 44 1377-1978 Determination of moisture in salid fuels.
CSN 44 1377-2004 Solid minerál fuels - Determination of moisture
CSN 44 1377 Z1-1995
CSN 44 1364-1986 Solid fuels. Calculation of mineral matter , its composition and composition of true combustible matter of coal
CSN 35 8737-1975 Semiconductor devices. Diodes. Measurement of differential rosistanoe
CSN 75 7711-1987 Water Quality Microscopical biological qualitative and quantitative analysis
CSN 75 7712-1998 Water quality - Biological analysis - Determination of bioseston

American National Standards Institute （ANSI), solid trace moisture

BS EN ISO 18134-3:2023 Solid biofuels. Determination of moisture content Moisture in general analysis sample (British Standard)
BS EN ISO 18134-1:2022 Tracked Changes. Solid biofuels. Determination of moisture content Reference method (British Standard)

VN-TCVN, solid trace moisture

TCVN 5264-1990 Bee products.Determination of water-insoluble solid content
TCVN 7804-2007 Fruit and vegetable products.Determination of water-insoluble solids
TCVN 7870-12-2010 Quantities and units.Part 12: Solid state physics
TCVN 7771-2007 Fruit and vegetable products.Determination of soluble solids.Refractometric method

Group Standards of the People's Republic of China, solid trace moisture

T/QAS 030-2021 Gravimetric method for determination of total soluble solids in brine
T/CIQA 26-2021 Code of Practice for Controlling Moisture Content of Liquefiable Solid Bulk Cargoes
T/ZZB 2627-2022 Water-soluble fertilizers containing humic-acids—Solid macronutrient type
T/CNCIA 01005-2018 Definition of low VOCs content high solids, ultra high solids and solvent-free epoxy coating
T/ZAQ 10117-2023 Determination of Microcystis Gene in Water Real-time Quantitative PCR methods
T/GAIA 004-2020 Determination of eleven odor compounds in water by headspace solid phase microextraction coupled with gas chromatography-mass spectrometry
T/CIQA 7-2020 Rapid determination of the moisture content of ethanol Microwave transmission method

Professional Standard - Geology, solid trace moisture

DZ/T 0064.9-2021 Methods of Analysis of Groundwater Quality Part 9: Gravimetric Method for Determination of Total Dissolved Solids
DZ/T 0064.9-1993 Determination of Total Dissolved Solids in Groundwater Quality Examination Methods

IT-UNI, solid trace moisture

UNI EN ISO 21660-3:2021 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample
UNI 6394-1977
UNI EN ISO 21656:2021 Solid recovered fuels - Determination of ash content

Professional Standard - Machinery, solid trace moisture

JB/T 11531-2013 Transmitters for moisture content in sulfur hexafluoride gas for high voltage switches

Professional Standard - Agriculture, solid trace moisture

NY 663-2003 Quality classification for micro hydraulic generator equipment

Professional Standard - Aerospace, solid trace moisture

QJ 914.4-1985 Composite solid propellant (butylene carboxyl system) - Analysis method for moisture content

SE-SIS, solid trace moisture

SIS SS 02 81 92-1989 Microfungi in water — Quantitative determination with the membrane filter method
SIS SS-ISO 5884:1989 Aerospace — Fluid systems and compo- nents — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

TR-TSE, solid trace moisture

TS 1129-1972 FRUIT AND VEGETABLE PRODUCTS DETERMINATION OF TOTAL SOLIDE

ES-AENOR, solid trace moisture

UNE 77-075-1991 Water quality. Evaluation of membrane filters used for microbiological analyses

IPC - Association Connecting Electronics Industries, solid trace moisture

IPC TM-650 5.1.412-1975 Analysis of Epoxy Resin for Solids Content

Taiwan Provincial Standard of the People's Republic of China, solid trace moisture

CNS 7490-1998 Method of Test for Microquantities of Uranium in Water by Fluorometry

European Committee for Electrotechnical Standardization（CENELEC）, solid trace moisture

EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
HD 109.5 S1-1989 Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links

BE-NBN, solid trace moisture

NBN C 61-127-5-1992 Miniature fuses Part 5 : Guidelines for quality assessment of miniature fuse-links

International Electrotechnical Commission (IEC), solid trace moisture

IEC 60127-5:1988 Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links
IEC 60127-5:2016 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

API - American Petroleum Institute, solid trace moisture

API REFINERY SOLID-1978 THE 1976 API REFINERY SOLID WASTE SURVEY Part 1: Solid Waste Quantities

YU-JUS, solid trace moisture

JUS H.F8.201-1986 Gases. Determination of vvater content. Oravimetric method
JUS H.P8.513-1986 Testing of pesticides. Rapid determination of vvater contentand suspended solids

CH-SNV, solid trace moisture

SN EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)

TH-TISI, solid trace moisture

TIS 235.12-2013 Quantities and units.part 12: solid state physics

农业农村部, solid trace moisture

NY/T 2909-2016 Biomass solid pellet fuel quality classification

Professional Standard - Petrochemical Industry, solid trace moisture

SH/T 0078-1991 Determination of Trace Moisture in Liquefied Petroleum Gas (Electrolysis Method)

(U.S.) Ford Automotive Standards, solid trace moisture

FORD ESB-M50J107-A-2012 ENAMEL, ACRYLIC BAKING, NON-AQUEOUS DISPERSION (NAD), INTERMEDIATE SOLIDS, EXTERIOR BODY QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Energy, solid trace moisture

NB/T 11245-2023 Determination of Trace Elements in Solid Biomass Fuels by Inductively Coupled Plasma-Atomic Emission Spectrometry