ZH
RU
ES
The most authentic gas detector
The most authentic gas detector, Total:103 items.
In the international standard classification, The most authentic gas detector involves: Alarm and warning systems, Non-destructive testing, Nuclear energy engineering, Electrical equipment for working in special conditions, Medical equipment, Electromagnetic compatibility (EMC), Measurement of volume, mass, density, viscosity, Radiation protection, Radiation measurements, Explosion protection, Gears, Air quality, Pipeline components and pipelines, Metrology and measurement in general, Welding, brazing and soldering, Corrosion of metals, Protection against fire, Electrical wires and cables, Fuels.
Association Francaise de Normalisation, The most authentic gas detector
- NF C23-558:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.
- NF C23-557:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.
- NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
- NF EN 13625:2002 Essais non destructifs - Contrôle d'étanchéité - Guide pour la sélection des instruments utilisés pour le mesurage des fuites gazeuses
- NF EN 14624:2020 Performances des détecteurs de fuites portables et des détecteurs de gaz fixes pour tous les fluides frigorigènes
- NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
- NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
- NF E35-422*NF EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- NF C23-560-5:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 5 : performance requirements for group II apparatus indicating a volume fraction up to 100 % gas.
- NF C23-560-2:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 2 : performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air.
- NF C23-560-3:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 3 : performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air.
- NF C23-560-4:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 4 : performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit.
- NF C23-541-1/A1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
- NF C23-541-1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
- NF X43-016:1977 Method for the determination of an acid gas pollution index(expressed as SO2 equivalent)using a continuous sampling automatic sequential analyser.
- NF C93-625*NF EN 60444-5:2001 Measurement of quartz crystal unit parameters - Part 5 : methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
- NF EN IEC 80601-2-59:2019 Appareils électromédicaux - Partie 2-59 : exigences particulières pour la sécurité de base et les performances essentielles des imageurs thermiques pour le dépistage des humains fébriles
- NF EN IEC 80601-2-59/A1:2023 Appareils électromédicaux - Partie 2-59 : exigences particulières pour la sécurité de base et les performances essentielles des imageurs thermiques pour le dépistage des humains fébriles
Society of Automotive Engineers (SAE), The most authentic gas detector
- SAE J2970-2023 Minimum Performance Requirements for Non-Refrigerant Tracer Gases and Electronic Tracer Gas Leak Detectors
British Standards Institution (BSI), The most authentic gas detector
- BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
- BS 6020-5:1982 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% gas
- BS EN 45544-3:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for general gas detection
- BS EN 14624:2020 Tracked Changes. Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- BS 6020-4:1981 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
- BS 6020-3:1982 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 100% methane
- BS 6020-2:1981 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
- BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - General requirements and test methods
- BS EN ISO 15616-3:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
European Committee for Standardization (CEN), The most authentic gas detector
- EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
- EN ISO 80601-2-55:2018/prA1 Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors - Amendment 1 (ISO 80601-2-55:2018/DAM 1:2023)
International Electrotechnical Commission (IEC), The most authentic gas detector
- IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
- IEC 61578:1997 Radiation protection instrumentation - Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments - Test methods
- IEC 61779-5:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
- IEC 61779-2:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
- IEC 61779-3:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
- IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit
ISA - International Society of Automation, The most authentic gas detector
Korean Agency for Technology and Standards (KATS), The most authentic gas detector
KR-KS, The most authentic gas detector
American Society for Testing and Materials (ASTM), The most authentic gas detector
- ASTM F1452-92 Standard Specification for Minimum Performance and Safety Requirements for Anesthetic Gas Monitors
- ASTM E498-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E498/E498M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603-99 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603-99(2006) Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
- ASTM E498-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
- ASTM G186-05(2016) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
HU-MSZT, The most authentic gas detector
RU-GOST R, The most authentic gas detector
- GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
- GOST R 8.766-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)
- GOST R 8.693-2009 State system for ensuring the uniformity of measurements. Measuring instruments of artificial radioactive aerosols volumetric activity. Verification procedure
- GOST R 8.676-2009 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring ethanol content in gaseous and liquid media
German Institute for Standardization, The most authentic gas detector
- DIN EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- DIN EN 14624:2020-08 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants; German version EN 14624:2020
- DIN EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection; German version EN 45544-3:2015
- DIN EN 50271:2011 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies; German version EN 50271:2010
- DIN EN 50270 Berichtigung 1:2016 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015, Corrigendum to DIN EN 50270 (VDE 0843-30):2015-10; German version EN 50270:2015/AC:2016
- DIN EN 60444-5:1997 Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German version EN 60444-5:1997
- DIN EN 50267-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus; German version EN 50267-1:1998
- DIN 51422-1:1989 Testing of mineral oil hydrocarbons and similar liquids; determination of the grade of purity by gas-chromatography; n-heptane, iso-octane and toluene
- DIN EN 45544-2:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement; German version EN 45544-2:2015
- DIN EN ISO 80601-2-55/A1:2023-03 Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors - Amendment 1 (ISO 80601-2-55:2018/DAM 1:2023); German and English version EN ISO 80601-2-55:2018/prA1:2023 / N...
ES-UNE, The most authentic gas detector
- UNE-EN 14624:2021 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- UNE-EN 60444-5:1997 MEASUREMENT QUARTZ CRYSTAL UNIT PARAMETERS. PART 5: METHODS FOR THE DETERMINATION OF EQUIVALENT ELECTRICAL PARAMETERS USING AUTOMATIC NETWORK ANALYZER TECHNIQUES AND ERROR CORRECTION (Endorsed by AENOR in October of 1997.)
SE-SIS, The most authentic gas detector
- SIS SS-EN 50 058-1992 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas
- SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air
- SIS SS-EN 50 057-1992 Electrical apparatusfor the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
- SIS SS-EN 50 056-1992 Electrical apparatus for the detection and measurement of combustible gases — Performance requireménts for Group I apparatus indicating up to 100 % (v/v) methane
ZA-SANS, The most authentic gas detector
- SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
CZ-CSN, The most authentic gas detector
- CSN 25 4713-1982 Checking instruments for cylindrical worms, worm wheels and worm gear pairs. Technical regulations
CENELEC - European Committee for Electrotechnical Standardization, The most authentic gas detector
- EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen
- EN 60079-29-2:2007 Explosive atmospheres - Part 29-2: Gas detectors - Selection@ installation@ use and maintenance of detectors for flammable gases and oxygen (Incorporating Corrigendum December 2007)
- EN 50241-1:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours@ Part 1: General Requirements and Test Methods
BE-NBN, The most authentic gas detector
- NBN-EN 50058-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas
- NBN-EN 50057-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
- NBN-EN 50055-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (v/v) methane in air
- NBN-EN 50056-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100 % (v/v) methane in air
NZ-SNZ, The most authentic gas detector
- AS/NZS 4641:2007 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels-General requirements and test methods (Incorporating Amendment 1: June 2008)
International Organization for Standardization (ISO), The most authentic gas detector
- ISO 80601-2-55:2018/PRF Amd 1:2011 Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors — Amendment 1
- ISO 15616-3:2003 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
Standard Association of Australia （SAA）, The most authentic gas detector
- AS/NZS 61779.1/AMD 1:2005 Amendment No.1 to AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods
Professional Standard - Nuclear Industry, The most authentic gas detector
- EJ/T 1010-1996 Calibration of α and β radioactive aerosol monitors and testing methods for effectiveness of radon daughter compensation
Underwriters Laboratories (UL), The most authentic gas detector
- UL 920002 BULLETIN-2017 UL Standard for Safety Installation@ Operation@ and Maintenance of Toxic Gas-Detection Instruments (COMMENTS DUE: SEPTEMBER 25@ 2017)
- UL 920002-2013 UL Standard for Safety Installation@ Operation@ and Maintenance of Toxic Gas-Detection Instruments (First Edition; Reprint with revisions through and including October 13@ 2017)
Instrument Society of America (ISA), The most authentic gas detector
- ISA 92.0.01, PART I-1998 Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide Formerly ANSI/ISA-S92.0.01, Part 1-1998; Replaces ISA-S12.15 Part 1-1990