ZH
RU
ES

toughness

toughness, Total:498 items.

In the international standard classification, toughness involves: Company organization and management, Waxes, bituminous materials and other petroleum products, Cereals, pulses and derived products, Lifting equipment, Iron and steel products, Textile fibres, Footwear, Vocabularies, Road engineering, Services, Paint ingredients, Burners. Boilers, Powder metallurgy, Aircraft and space vehicles in general, Testing of metals, Wood-based panels, Construction materials, Pipeline components and pipelines, Accident and disaster control, Protection of and in buildings, Wood technology processes, Wood, sawlogs and sawn timber, Materials for the reinforcement of composites, Plastics, Paints and varnishes, Sports equipment and facilities, Ceramics, Cutting tools, Conducting materials, Construction industry, Shipbuilding and marine structures in general, Paper and board, Adhesives, Materials for aerospace construction, Mechanical testing, Electrical wires and cables, Products of the textile industry, Environmental protection, Rubber, Raw materials for rubber and plastics, Cellular materials, Non-ferrous metals, Analytical chemistry, Non-textile floor coverings, Bridge construction, Construction technology, Surface treatment and coating, Welding, brazing and soldering, Applications of information technology, Glass, Physical planning. Town planning, Radiation measurements, Photography, Cork and cork products, Continuous handling equipment, Reinforced plastics, Nuclear energy engineering, Ferrous metals, Products of non-ferrous metals, Rubber and plastics products, Elements of buildings, Structures of buildings.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, toughness

GB/T 42187-2022 Security and resilience — Organizational resilience — Principles and attributes
GB/T 41669-2022 Security and resilience—Community resilience—Guidelines for planning the involvement of spontaneous volunteers
GB/T 41670-2022 Security and resilience—Community resilience—Guidelines for supporting vulnerable persons in an emergency
GB/T 1731-1993 Determination of flexibility of films
GB/T 1748-1979 Method of test for flexibility of putty coatings
GB/T 1940-2009 Method of testing in toughness of wood
GB/T 1940-1991 Method of testing in toughness of wood
GB/T 14389-1993 Test method for impact toughness of high performance ceramics
GB/T 4742-1984 Standard test method for lashing toughness of domestic ceramic
GB/T 23538-2009 Conventional abrasive.Testing method for toughness(Ball mill method)
GB 4742-1984 Determination method of impact toughness of ceramics for daily use
GB/T 1817-1995 Test method of impact toughness of cemented carbides at room temperature
GB/T 33144-2016(英文版) Superabrasive—Test method of impact toughness index
GB/T 30146-2023 Security and Resilience Business Continuity Management System Requirements
GB/T 41694-2022 Security and resilience—Emergency management—Guidelines for monitoring facilities with identified hazards
GB/T 1451-2005 Fiber-reinforced plastics composites---Determination of Charpy impact properties
GB/T 41738-2022 Test method for mode I interlaminar fracture toughness(GIC) of fibre metal laminates
GB/T 1451-1983 Test method for the charpy impact resistance of glass fiber-reinforced plastics
GB/T 23806-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam(SEPB)method
GB/T 41932-2022 Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach

International Truck and Engine Corporation (ITEC), toughness

INTERN CEMS GT-4C-2009 Toughness Of Paint

American Society for Testing and Materials (ASTM), toughness

ASTM D5801-95(2006) Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM D5801-17 Standard Test Method for Toughness and Tenacity of Asphalt Materials
ASTM A220/A220M-99(2009) Standard Specification for Pearlitic Malleable Iron
ASTM A220/A220M-99(2014) Standard Specification for Pearlitic Malleable Iron
ASTM D5801-12 Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM C711-93(1997) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C711-03(2009) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C711-14 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM D4145-83(1996)e1 Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D4145-83(2002) Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
ASTM E190-92(2003) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM E1820-01 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
ASTM D3499-19 Standard Test Method for Toughness of Wood Structural Panels
ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
ASTM D3499-94 Standard Test Method for Toughness of Wood-Based Structural Panels
ASTM A573/A573M-05 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
ASTM D3499-94(2005) Standard Test Method for Toughness of Wood-Based Structural Panels
ASTM D3499-94(2000) Standard Test Method for Toughness of Wood-Based Structural Panels
ASTM D34-91(1999) Standard Guide for Chemical Analysis of White Pigments
ASTM B106-08(2019) Standard Test Methods for Flexivity of Thermostat Metals
ASTM D1055-04 Standard Specifications for Flexible Cellular Materials-Latex Foam
ASTM B646-97 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM D1055-09 Standard Specifications for Flexible Cellular Materials-Latex Foam
ASTM B646-12 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM D4145-10 Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM B646-04 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-03 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM C765-97(2001)e1 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM B646-06 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM A573/A573M-05(2009) Standard Specification for Structural Carbon Steel Plates of Improved Toughness
ASTM B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM C765-97(2011) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM F911-85(1994) Standard Test Method for Flexibility of Running Shoes (Withdrawn 2002)
ASTM D6905-20 Standard Practice for Impact Flexibility of Organic Coatings
ASTM D4145-10(2022) Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM B646-17 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B646-19 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM A573/A573M-13 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
ASTM C765-97(2015) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM F2031-05 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-00 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM F2031-05(2010) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM B771-87(2001) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM E2818-11(2019) Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
ASTM F2031-05(2014) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
ASTM B771-11(2021) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM F147-87(2017) Standard Test Method for Flexibility of Non-Metallic Gasket Materials
ASTM E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM E399-90(1997) Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials
ASTM D1056-00 Standard Specification for Flexible Cellular Materials-Sponge or Expanded Rubber
ASTM D1056-07 Standard Specification for Flexible Cellular Materials8212;Sponge or Expanded Rubber
ASTM E399-08 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-09 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E399-06e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
ASTM E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
ASTM D1056-14 Standard Specification for Flexible Cellular Materialsmdash;Sponge or Expanded Rubber
ASTM A300-68 Standard Specification for Notch Toughness Requirements for Normalized Steel Plates for Pressure Vessels
ASTM B645-98 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM A727/A727M-02 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
ASTM A727/A727M-00 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
ASTM E1290-99 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM A727/A727M-14(2019) Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
ASTM C765-23 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E1290-08 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM A758/A758M-13 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
ASTM D2453-99 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM E399-20a Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-22 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E399-23 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM D2453-15(2020)e1 Test method for shrinkage and toughness of oil-based and resin-based caulking compounds
ASTM B645-02 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM D5683-95(1999)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

CZ-CSN, toughness

CSN 67 3150 Cast.08-1975 Flexibility test
CSN 65 7072-1966 Determination of impact toughness of bitumens
CSN 34 7170-1965 Insulation pliability testing. Wires. Conductors for winding.
CSN 64 0125-1953
CSN 34 7191-1965 Insulation pliability testing of strips. Conductors for winding.
CSN 64 0124-1953

SE-SIS, toughness

SIS SEN 43 16 18-1962 Robustness of terminations
MNC 328-1990 Metallic materials — Testing — Impact toughness — Summary

Professional Standard - Light Industry, toughness

QB/T 1433.2-2005 Semihard biscuits
QB/T 1433.2-1992 biscuit toughness biscuit

International Organization for Standardization (ISO), toughness

ISO/TR 23602:2005 Toughness of chain steels
ISO 22300:2018 Security and resilience — Vocabulary
ISO 22300:2021 Security and resilience — Vocabulary
ISO 28079:2009 Hardmetals - Palmqvist toughness test
ISO 20064:2019 Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca
ISO/TR 21704:2017 Toughness of round steel link chains - Test with sub-size specimens
ISO 4672:1978 Rubber products — Hoses — Low-temperature flexibility tests
ISO/TS 28660:2022 Plastics — Determination of J-R curves — Fracture toughness
ISO 5629:1983 Paper and board; Determination of bending stiffness; Resonance method
ISO/CD 24437 Superabrasive — Test method of impact toughness index
ISO/DTS 31050 Guidance for managing emerging risks to enhance resilience
ISO 5629:2017 Paper and board - Determination of bending stiffness - Resonance method
ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
ISO 12737:1996 Metallic materials - Determination of the plane-strain fracture toughness
ISO 12737:2010 Metallic materials — Determination of plane-strain fracture toughness
ISO 29221:2014 Plastics - Determination of mode I plane-strain crack-arrest toughness
ISO 15567:1998 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
ISO 18907:2013 Imaging materials - Photographic films and papers - Wedge test for brittleness
ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes - Determination of the fracture toughness properties
ISO 18907:2000 Imaging materials - Photographic films and papers - Wedge test for brittleness
ISO/TR 7705:1991 Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications
ISO 20267:2017 Thermal spraying - Determination of interfacial toughness of ceramic coatings by indentation
ISO/TS 7705:2017 Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications
ISO 12135:2002 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO/TS 17958:2013 Paper and board - Determination of fracture toughness - Constant rate of elongation method (1,7 mm/s)
ISO 12135:2016 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12135:2021 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness

International Federation of Trucks and Engines, toughness

NAVISTAR CEMS GT-4C-2015 VOID - Toughness Of Paint

British Standards Institution (BSI), toughness

BS 67000:2019 City resilience. Guide
ASME B31.T-2010 Standard Toughness Requirements for Piping
BS ISO 28079:2009 Hardmetals - Palmqvist toughness test
PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness
BS PD ISO/TR 21704:2017 Toughness of round steel link chains. Test with sub-size specimens
PD ISO/TR 22370:2020 Security and resilience. Urban resilience. Framework and principles
BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
BS ISO 37123:2019 Sustainable cities and communities. Indicators for resilient cities
BS EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
BS EN ISO 12737:2011 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2006 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2010 Metallic materials. Determination of plane-strain fracture toughness
BS ISO 29221:2014 Plastics. Determination of mode I plane-strain crack-arrest toughness
18/30374388 DC BS ISO 37123. Sustainable cities and communities. Indicators for resilient cities
BS CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
PD ISO/TR 21704:2017 Toughness of round steel link chains. Test with sub-size specimens
BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS ISO 20267:2017 Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation
PD ISO/TS 17958:2013 Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
BS ISO 12135:2021 Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
BS EN 1993-1-10:2005 Eurocode 3. Design of steel structures - Material toughness and through-thickness properties

轻工业部, toughness

QB 1433.2-1992 biscuit toughness biscuit

Korean Agency for Technology and Standards (KATS), toughness

KS F 2488-2016(2021) Standard test method for toughness and tenacity of modified asphalt binder
KS F 2517-2005(2010) Testing method for toughness of rock
KS F 2517-1985 Testing method for toughness of rock
KS F 2517-2005 Testing method for toughness of rock
KS B 1531-2019 Screwed type malleable cast iron pipe fittings
KS L 1608-2014(2019) Testing method for fracture toughness of fines ceramics at elevated temperature
KS L 6520-1988(1998) TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
KS L 6520-1986 TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
KS F 2488-2006 Standard test method for toughness and tenacity of modified asphalt binder
KS M ISO 5629:2007 Paper and board-Determination of bending stiffness-Resonance method
KS K 0539-2006 Determination of flexural stiffness of fabrics：Flexometer method
KS M ISO 5629:2017 Paper and board－Determination of bending stiffness－Resonance method
KS L 1600-2010(2020) Testing methods for fracture toughness of high performance ceramics
KS M ISO 4662:2020 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
KS B ISO 12737:2002 Metallic materials-Determination of plane-strain fracture toughness
KS B ISO 12737:2015 Metallic materials－Determination of plane－strain fracture toughness
KS K ISO 24344-2010(2020) Resilient floor coverings－Determination of flexibility and deflection
KS F 2488-2016 Standard test method for toughness and tenacity of modified asphalt binder
KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
KS M ISO 11673:2005 Unplasticized polyvinylchloride(PVC-U) pressure pipes-Determination of the fracture toughness properties
KS M ISO 5979-2009(2019) Rubber or plastics coated fabrics－Determination of flexibility－Flat loop method
KS D ISO TR 7705:2005 Guidelines for specifying charpy V-notch impact prescriptions in steel specifications
KS M ISO 17958:2014 Paper and board — Determination of fracture toughness — Constant rate of elongation method(1.7 mm/s)
KS M ISO 11673-2005(2020) Unplasticized polyvinylchloride(PVC－U) pressure pipes－Determination of the fracture toughness properties
KS D ISO TR 7705:2013 Guidelines for specifying charpy V-notch impact prescriptions in steel specifications
KS M ISO 703-1:2007 Conveyor belts－Transverse flexibility and troughability－Part 1：Test method
KS M ISO 703-1:2011 Conveyor belts－Transverse flexibility and troughability－Part 1：Test method
KS D ISO 12135:2005 Metallic materials-Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135-2005(2010) Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135:2013 Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS M ISO 13586-2012(2017) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach

Indonesia Standards, toughness

SNI 08-6108-1999 High tenacity viscose rayon staple fibre
SNI 08-1111-1989 Test method for fineneas of flax fibre
SNI 0276-2009

FI-SFS, toughness

SFS 5444-1988 BETONI. TAIVUTUSVETOLUJUUS
SFS 5284-1987
SFS 5286-1987
SFS 2325-1968
SFS 2001-1967
SFS 5285-1987
SFS 2326-1968

RU-GOST R, toughness

GOST 14226-1980 Footwear. Flexibility norms
GOST 11842-1976 Wood particle boards. Method for determination of resilience
GOST 20571-1975 Modified wood. Method for determination of shock resistance
GOST 16483.4-1973 Wood. Methods for determination of impact bending strength
GOST 6943.13-1994 Textile glass. Method for determination of stiffness of roving
GOST 6943.13-1979 Glass textile products. Method of rigidity determination
GOST 4647-1980 Plastics. Method for determination of Charpy's impact strength
GOST 9626-1990 Laminated glued wood. Method for determination of impact viscosity in bending
GOST 22950-1995 Mineral wool slabs of higher rigidity on synthetic bond. Specifications
GOST 22950-1978 Mineral wool slads of higher rigidity on synte synthetic binder. Technical requirements
GOST 473.11-1981 Chemically resistant and heat resistant ceramic ware. The method for determination of resilience
GOST 11067-1985 Inorganic glass and glass-crystal materials. Method for the determination of impact strength

HU-MSZT, toughness

MSZ 5200/4.lap-1964

Professional Standard - Traffic, toughness

JT/T 942-2014 Bitumen toughness and tenacity testing machine

National Metrological Verification Regulations of the People's Republic of China, toughness

JJG(交通) 118-2014 Bitumen Toughness and Tenacity Testing Machine
JJG 118-2014 Asphalt Viscosity Toughness Tester
JJG 164-2020 Plastic bellows flexibility test device

PT-IPQ, toughness

NP 148-1958

Professional Standard - Petrochemical Industry, toughness

SH/T 0735-2003 Standard test method for toughness and tenacity of bitumen

GM North America, toughness

GM 9984850-1990 Topcoat Low Solids, Flexible Enamel Revision E [Replaced: GMNA 9984039]
GM 9984857-1990 Molded-In Coating for Flexible Elastomers Revision A
GM 9984854-1989 Topcoats, Flexible Enamel, High Solids Revision A
GM 9984856-1989 Topcoats, Flexible Enamel, Accent Colors Revision B
GM 9984852-1995 Topcoat System, Flexible Solventborne Basecoat/ Clearcoat Revision H [Replaced: GMNA 9984074]
GM 9984858-1995 Topcoat - Flexible Enamel, Waterborne Basecoat/Solvent- Borne Clearcoat Revision A

WRC - Welding Research Council, toughness

BULLETIN 486-2003 INDEXING FRACTURE TOUGHNESS DATA
BULLETIN 458-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: APPLICATION OF MASTERCURVE FRACTURE TOUGHNESS METHODOLOGY FOR FERRITIC STEELS
BULLETIN 457-2000 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: FRACTURE TOUGHNESS OF FERRITIC STEELS AND ASTM REFERENCE TEMPERATURE (TA)
BULLETIN 111-1966 INTERPRETIVE REPORT ON WELD-METAL TOUGHNESS
BULLETIN 165-1971 THE TOUGHNESS OF 2 ?% AND 3 ?% NICKEL STEELS AT CRYOGENIC TEMPERATURES
BULLETIN 205-1975 FRACTURE TOUGHNESS AND RELATED CHARACTERISTICS OF THE CRYOGENIC NICKEL STEELS
BULLETIN 375-1992 THE SIGNIFICANCE OF THE A/W RATIO ON FRACTURE TOUGHNESS OF A-36 STEEL
BULLETIN 175-1972 PVRC RECOMMENDATIONS ON TOUGHNESS REQUIREMENTS FOR FERRITIC MATERIALS
BULLETIN 59-1960 FACTORS WHICH AFFECT LOW-ALLOY WELD METAL NOTCH-TOUGHNESS
BULLETIN 403-1995 METALLURGICAL AND FRACTURE TOUGHNESS STUDIES OF A516-70 STEEL: )METALLURGICAL CHARACTERIZATION OF THE HAZ IN A516-70 AND EVALUATION OF FRACTURE TOUGHNESS SPECIMENS ; II)COMPARISON OF THE CTOD FRACTURE
BULLETIN 266-1981 WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 1: WELD SIMULATION TESTING ; WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 2: WIDE PLATE TESTING
BULLETIN 62-1960 COMPARISON AND ANALYSIS OF NOTCH TOUGHNESS TESTS FOR STEELS IN WELDED STRUCTURES
BULLETIN 345-1989 ASSESSING FRACTURE TOUGHNESS AND CRACKING SUSCEPTIBILITY OF STEEL WELDMENTS - A REVIEW
BULLETIN 459-2001 FRACTURE TOUGHNESS MASTER CURVE DEVELOPMENT: MASTER CURVE STRATEGIES FOR RPV ASSESSMENT
BULLETIN 261-1980 EFFECTS OF POROSITY ON THE FACTURE TOUGHNESS OF 5083@ 5456@ AND 6061 ALUMINUM ALLOY WELDMENTS

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., toughness

ASHRAE CH-06-3-2006 Symposium on Tenability and Risk
ASHRAE CH-06-3-1-2006 Overview of Tenability Analyses in Smoke Management Applications

Guangdong Provincial Standard of the People's Republic of China, toughness

DB4404/T 31-2022 A Guide to Building Resilient Communities

API - American Petroleum Institute, toughness

API BULL 6AM-1989 BULLETIN ON MATERIAL TOUGHNESS FIRST EDITION
API REPORT 88-25-1989 The Effect of Toughness on Tubular Good Service Performance
API SPEC 2MT2-2002 Rolled Shapes with Improved Notch Toughness (First Edition)
API TR 6AM-1995 Technical Report on Material Toughness (Second Edition; Formerly Bulletin 6AM)
API FRACTURE TOUGHNESS OF STEEL-1985 Fracture Toughness of Steels For API Standard 620 Appendix R Tanks
API REPORT 89-25-1990 Phase II - The Effect of Toughness on Tubular Good Service Performances
API SPEC 2MT1-1994 Specification for As-Rolled Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures

American Welding Society (AWS), toughness

WRC 457:2000 Fracture Toughness Master Curve Development: Fracture Toughness Of Ferritic Steels And ASTM Reference Temperature (To)
WRC 111:1966 Interpretive Report on Weld-Metal Toughness
WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels
WRC 540:2014 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region
WRC 577:2020 Constraint Effects on Fracture Toughness in the Ductile-Brittle Transition Region
WRC 535:2009 Toughness, Fracture and Fitness for Hydrogen Service
WRC 205:1975 Fracture Toughness and Related Characteristics of the Cryogenic Nickel Steels
WRC 375:1992 The Significance Of The a/W Ratio On Fracture Toughness Of A-36 Steel
WRC 459:2001 Fracture Toughness Master Curve Development: Strategies For RPV Assessment
WRC 165:1971 The Toughness of 2 1/4% and 3 1/2% Nickel Steels at Cryogenic Temperatures
WRC 175:1972 PVRC Recommendations on Toughness Requirements for Ferritic Materials
WRC 062:1960 Comparison And Analysis Of Notch Toughness Tests For Steels In Welded Structures
WRC 345:1989 Assessing Fracture Toughness And Cracking Susceptibility Of Steel Weldments - A Review
WRC 059:1960 Part 1: Factors Which Affect Low-Alloy Weld Metal Notch-Toughness
WRC 261:1980 Effects of Porosity on the Facture Toughness of 5083, 5456, and 6061 Aluminum Alloy Weldments

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, toughness

GB/T 33819-2017 Hardmetals—Palmqvist toughness test
GB/T 33144-2016 Superabrasive—Test method of impact toughness index
GB/T 1817-2017 Test method for impact toughness of cemented carbides at room temperature
GB/T 34564.1-2017 Cold-word mould steel—Part 1: High toughness and wear-resistance steels

CH-SNV, toughness

SEV 0106-1934
SNV 70101-1937
SNV 81110-1942 Textiles — Tests for colour fastness Section G01: Colour fastness to nitrogen oxides
VSM 15261-1934

United States Navy, toughness

NAVY MIL-B-82647 A NOTICE 2-2001 BAG, CONDUCTIVE PLASTIC, HEAT-SEALABLE, FLEXIBLE
NAVY MIL-B-82647 A-1986 BAG, CONDUCTIVE PLASTIC, HEAT-SEALABLE, FLEXIBLE
NAVY MIL-P-82646 A NOTICE 2-2001 PLASTIC FILM, CONDUCTIVE, HEAT-SEALABLE, FLEXIBLE
NAVY MIL-P-82646 A-1985 PLASTIC FILM, CONDUCTIVE, HEAT-SEALABLE, FLEXIBLE
NAVY DOD-A-82720 NOTICE 3-2004 ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC)
NAVY DOD-A-82720 (1)-1984 ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC)
NAVY DOD-A-82720-1982 ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC)

IPC - Association Connecting Electronics Industries, toughness

IPC TM-650 5.5.2.1-1998 Test Method 2.6.18 - Low Temperature Flexibility
IPC TM-650 2.4.52-2013 Fracture Toughness of Resin Systmes for Base Materials
IPC 9204-2017 Guideline on Flexibility and Stretchability Testing for Printed Electronics

国家市场监督管理总局、中国国家标准化管理委员会, toughness

GB/T 40947-2021 Guide for safety resilient city evaluation
GB/T 38591-2020 Standard for seismic resilience assessment of buildings
GB/T 1731-2020 Determination of flexibility of coating and putty films
GB/T 38338-2019 Test method for fracture toughness of carbon materials
GB/T 37602-2019 Ship and offshore engineering steel for low temperature service
GB/T 40151-2021 Security and resilience—Emergency management—Guidelines for capability assessment
GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method

German Institute for Standardization, toughness

DIN CWA 17302:2021-11 City Resilience Development - Information Portal; English version CWA 17302:2018
DIN CWA 17300:2021-11 City Resilience Development - Operational Guidance; English version CWA 17300:2018
DIN EN ISO 703:2017-06 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017); German version EN ISO 703:2017
DIN EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); English version of DIN EN ISO 12737
DIN EN 1735:1997-02 Rubber- or plastics coated fabrics - Determination of flexibility; German version EN 1735:1996
DIN EN ISO 24344:2012-04 Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008); German version EN ISO 24344:2012
DIN CWA 17302:2021 City Resilience Development - Information Portal; English version CWA 17302:2018
DIN CWA 17300:2021 City Resilience Development - Operational Guidance; English version CWA 17300:2018
DIN EN 1735:1997 Rubber- or plastics coated fabrics - Determination of flexibility; German version EN 1735:1996
DIN ISO/TR 21704:2019-09*DIN SPEC 5689:2019-09 Toughness of round steel link chains - Test with sub-size specimens
DIN CWA 17301:2021 City Resilience Development - Maturity Model; English version CWA 17301:2018
DIN 16830-1:1991 High impact polyvinyl chloride (PVC-HI) window profiles; testing
DIN EN ISO 15653:2018-06 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018); German version EN ISO 15653:2018
DIN EN 15813:2011-06 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures; German version EN 15813:2011

European Committee for Standardization (CEN), toughness

CWA 17300:2018 City Resilience Development - Operational Guidance
CWA 17302:2018 City Resilience Development - Information Portal
EN 12503-7:2001 Sports mats - Part 7: Determination of static stiffness
EN 13045:2000 Packaging - Flexible Cylindrical Plastic Tubes - Dimensions and Tolerances
EN ISO 12737:1999 Metallic Materials - Determination of Plane-Strain Fracture Toughness
EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
EN 15813:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures

GM Holden Ltd, toughness

HOLDEN HN 2389-2002 ADHESIVE CYANOACRYLATE, TOUGHENED

PL-PKN, toughness

PN C04255-1988 Rubber vulcanized Determination of resilience with Schob's method
PN BN 7102-01-1966 Lignofol and lignostone De?ermination of toughness strength
PN H04335-1987 Metals Test method for piane — strain fracture toughness
PN BN 8931-02-1964
PN H04336-1988 Metals Test method of fracture toughness by measurement critic value J integral, Jlc

Japanese Industrial Standards Committee (JISC), toughness

JIS K 7171:2008 Plastics -- Determination of flexural properties
JIS K 7171:2016 Plastics -- Determination of flexural properties
JIS K 7171:1994 Plastics -- Determination of flexural properties
JIS R 1617:1994 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS R 6128:1987 Ball mill test for toughness of artificial abrasives
JIS R 1617:2002 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS R 1668:2005 Testing method for fracture toughness of porous fine ceramics
JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS K 7086:1993 Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics

ESDU - Engineering Sciences Data Unit, toughness

ESDU 02016-2013 Fracture toughness (KIc) values of some cast irons
ESDU 96013-1996 Fracture toughness (KIc) values for some aluminium alloys.
ESDU 02016-2003 Fracture toughness (K sub Ic) values of some cast irons
ESDU 83023 A-1995 Fracture toughness (K sub I sub c) values of some steels.

Group Standards of the People's Republic of China, toughness

T/CASME 181-2022 High toughness and high sealing baking varnish
T/CECS 1269-2023 Criteria for evaluating the resilience of existing urban communities
T/CFA 010202.1-2017 Low temperature alloy cast steel with high toughness
T/CHTS 10036-2021 Technical Guideline for Super Toughness Concrete (STC) Composite Deck Structure
T/CECS 997-2022 Technical specification for reinforced masonry structures with high toughness concrete
T/ZGTXXH 072-2023 IP Network resilience specification for computing network convergence network infrastructure

BR-ABNT, toughness

ABNT P-EB-346-1970

American National Standards Institute （ANSI), toughness

ANSI/ASTM F2031:2005 TEST METHOD FOR MEASUREMENT OF ARROW SHAFT STATIC SPINE STIFFNESS
ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

IN-BIS, toughness

IS 5218-1969
IS 10180-1982
IS 13826 Pt.2-1993 Bitumen based felt. Methods of test. Part 2: Pliability test
IS 12657-1989

Professional Standard - Aviation, toughness

HB 5278-1984 Test method for low temperature impact toughness of metals
HB 5382-1987 Test method for flexibility of liquid gaskets for aviation
HB 5279-1984 Test method for surface crack fracture toughness of sheet metal
HB 7718.1-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 1:Test method of mode Ⅰ interlaminar fracture toughness
HB 7718.2-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 2:Test method of mode Ⅱ interlaminar fracture toughness

Association Francaise de Normalisation, toughness

NF ISO 3060:2017 Fibres de coton- Détermination de la ténacité de rupture des faisceaux plats
NF G07-080:1972 Method for determination of breaking tenacity of flat bundles of cotton fibers.
NF EN ISO 703:2017 Courroies transporteuses - Flexibilité transversale (aptitude à la mise en auge) - Méthode d'essai
NF A03-180:2006 Metallic materials - Determination of plane-strain fracture toughness.
FD E26-003*FD ISO/TR 21704:2017 Toughness of round steel link chains - Test with sub-size specimens
NF EN ISO 17235:2016 Cuir - Essais physiques et mécaniques - Détermination de la souplesse
NF P22-380-1/NA*NF EN 1993-1-10/NA:2007 Eurocode 3 - Design of steel structures - Part 1-10 : material toughness and through-thickness properties - National Annex to NF EN 1993-1-10:2005 - Material toughness and through-thickness properties
NF EN ISO 19110:2017 Résilience des chaînes à maillons en acier rond - Essai sur des éprouvettes sous-dimensionnées
FD ISO/TR 21704:2017 Résilience des chaînes à maillons en acier rond - Essai sur des éprouvettes sous-dimensionnées
NF EN ISO 20501:2022 Céramiques techniques - Analyse statistique de Weibull des données de résistance à la rupture
NF EN 1735:1997 Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la souplesse
NF G07-307:1987 Textiles - Essais des fibres - Détermination de la ténacité de rupture des faisceaux de fibres de laine.
NF A89-217*NF EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
NF EN ISO 15653:2018 Matériaux métalliques - Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures
NF EN 15813:2011 Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de la souplesse à basse température
NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.

National Metrological Technical Specifications of the People's Republic of China, toughness

JJF(石化) 003-2015 Calibration Specification for Putty Film Flexibility Testers
JJF(石化)003-2015 Calibration Specification for Putty Film Flexibility Testers

Professional Standard - Forestry, toughness

LY/T 1407-1999 Laminated wood plastics.Compreg Determination of impact resistance parallel to glueline

Professional Standard - Petroleum, toughness

SY/T 10051.2-2005 Rolled shapes with improved notch toughness
SY 100512-2005 Specification for rolled sections with improved notch toughness
SY/T 0526.18-1993 Coal tar enamel coating layer winding tape flexibility test
SY 100511-2004 Specification for carbon-manganese steel plates with improved toughness for offshore structures
SY/T 10051.1-2004 Specification for carbon-manganese steel plates with improved toughness for offshore structures

Taiwan Provincial Standard of the People's Republic of China, toughness

CNS 14144-1998 Methods of test for fracture toughness of fine ceramics at elevated temperature
CNS 9437-1982 Method of Test for Toughness of Artificial Abrasives (Ball Mill Method)
CNS 14185-1998 Method of test for toughness and tenacity of bituminous materials

American Society of Mechanical Engineers (ASME), toughness

ASME SEC XI D1 NMA APP G-2002 Appendix G Fracture Toughness Criteria for Protection Against Failure
ASME STP-PT-033-2011 DEGRADATION OF NOTCH TOUGHNESS BY A POST WELD HEAT TREATMENT (PWHT)

Society of Automotive Engineers (SAE), toughness

SAE ARP1704-1981 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
SAE ARP1704A-1981 Short-Bar Fracture Toughness of Metallic Materials, Determination Of
SAE AMS3570C-1984 FOAM, FLEXIBLE POLYURETHANE Open Cell, Medium Flexibility
SAE AMS3570D-1989 FOAM, FLEXIBLE POLYURETHANE Open Cell, Medium Flexibility
SAE AMS3570B-1977 FOAM, FLEXIBLE POLYURETHANE Open Cell, Medium Flexibility
SAE AMS3570E-2001 Foam, Flexible Polyurethane Open Cell, Medium Flexibility
SAE AMS7904C-2006 Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade
SAE AMS5315D-1987 Ductile (Nodular) Iron Castings, Sand, 60,000 psi (415 MPa) Tensile Strength, Ferritize Annealed
SAE AMS5394C-1983 Castings, Alloy Iron-Ductile, Sand 2Cr 20Ni (2.4-3.0C), Stress Relieved
SAE AMS5394-1955 ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION AND HEAT RESISTANT 2Cr - 20Ni
SAE AMS5395B-2011 ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION RESISTANT 22Ni (2.5 - 3.0C) As Cast
SAE AMS5316D-1987 Ductile (Nodular) Iron Castings, Sand, 80,000 psi (550 MPa) Tensile Strength, As Cast
SAE AMS5394A-1977 ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION AND HEAT RESISTANT 2.0Cr - 20Ni (2.4 - 3.0C)
SAE J2477-2004 Automotive Austempered Ductile (Nodular) Iron Castings (ADI)
SAE AMS5867B-2015 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
SAE AMS5867C-2021 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
SAE AMS3570-1956 FLEXIBLE POLYURETHANE FOAM Open Cell, Medium Flexibility 2.5 lb per cu ft
SAE AMS3570A-1963 FLEXIBLE POLYURETHANE FOAM Open Cell, Medium Flexibility 2.5 lb per cu ft
SAE AMS5867B-2010 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed
SAE AMS5867A-2006 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed
SAE AMS5867-2000 Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (SAE 51410) Enhanced Fracture Toughness, Annealed

SAE - SAE International, toughness

SAE ARP1704A-1993 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS@ DETERMINATION OF

American Petroleum Institute (API), toughness

API Spec 2MT2-2002(2019) Rolled Shapes with Improved Notch Toughness
API Spec 2MT1-2001(2012) Specification for Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures

未注明发布机构, toughness

DIN EN 1993-1-10 NA:2016 Part 1-10: Material toughness and through-thickness properties
DIN EN ISO 12737:1999 Metallic materials – Determination of plane-strain fracture toughness
BS 7448-3:2005(2007) Fracture mechanics toughness tests — Part 3 : Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa · m0.5 sp1

U.S. Military Regulations and Norms, toughness

ARMY A-A-56031 VALID NOTICE 1-2002 ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT
ARMY A-A-56031-1996 ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT
ARMY MIL-I-47100 NOTICE 4-1995 INSULATION SLEEVING, FLEXIBLE, BRAIDED, 200 DEGREES CELSIUS (HIGH TEMPERATURE POLYAMIDE)
ARMY MIL-I-47100-1974 INSULATION SLEEVING, FLEXIBLE, BRAIDED, 200 DEGREES CELSIUS (HIGH TEMPERATURE POLYAMIDE)

ZA-SANS, toughness

SANS 6207:2007 Bending test for highly flexible cords such as tinsel cords
SANS 805:1970 Unwrought tough pitch coppers: Tough pitch high conductivity copper
SANS 5326:2007 Skein strength and tenacity, and linear density of spun textile yarns on packages
SANS 10070:2007 The installation of resilient thermoplastic and similar flexible floor covering materials

Standard Association of Australia （SAA）, toughness

AS ISO 37123:2020 Sustainable cities and communities — Indicators for resilient cities

Professional Standard - Aerospace, toughness

QJ 2200-1991 Test method for impact toughness of rigid foamed plastics
QJ 990.7-1986 Coating inspection method Coating flexibility inspection method
QJ 1632-1989 Test method for impact toughness of carbon fiber reinforced plastic sheet

Military Standard of the People's Republic of China-General Armament Department, toughness

GJB 9965-2021 Specification for heat-sealable flexible transparent barrier materials
GJB 2605-1996 Specification for heat-sealable flexible antistatic barrier materials
GJB 2605A-2021 Specification for heat-sealable flexible antistatic barrier materials
GJB 2492-1995 General specification for flexible waterproof and oil-resistant barrier materials
GJB 2493-1995 General Specification for Heat-sealable Flexible Oil-Resistant and Moisture-Resistant Barrier Materials
GJB 9449-2018 Specification for rods of high toughness ultra-high strength steel 16Co14Ni10Cr2Mo for aerospace applications

KR-KS, toughness

KS M ISO 4662-2020 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
KS M ISO 703-1-2007 Conveyor belts－Transverse flexibility and troughability－Part 1：Test method

RO-ASRO, toughness

STAS 8916-1971 SAFETY RUBBER FOOT WEAR Determination of the flexiblily and lightness

ES-AENOR, toughness

CEN - European Committee for Standardization, toughness

EN ISO 12737:2010 Metallic materials - Determination of plane-strain fracture toughness
EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds

Danish Standards Foundation, toughness

DS/EN 1735:1997 Rubber- or plastics-coated fabrics - Determination of flexibility
DS/EN ISO 24344:2012 Resilient floor coverings - Determination of flexibility and deflection
DS/EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
DS/EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility

Lithuanian Standards Office , toughness

LST EN 1735-2000 Rubber- or plastics coated fabrics - Determination of flexibility
LST EN ISO 703:2007 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2007)
LST EN ISO 24344:2012 Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008)

American Water Works Association (AWWA), toughness

AWWA C111/A21.11-2006 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings

AASHTO - American Association of State Highway and Transportation Officials, toughness

DIVISION I 10.3-1996 Repetitive Loading and Toughness Considerations (Interim 2000;)

AENOR, toughness

UNE-EN 1735:1997 Rubber- or plastics coated fabrics - Determination of flexibility
UNE-EN ISO 24344:2012 Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008)

Professional Standard - Building Materials, toughness

JC/T 259-1993 Performance test method for cast stone products. Impact toughness test

YU-JUS, toughness

JUS H.N5.102-1991 Testliner ??r Hatmta?iure of corrugated fibre board. Tecbnical requirements
JUS Z.M3.035-1990 Packinq. Sacks made from thermoplastic flexible film. Vocabularv and tvpes
JUS Z.M3.036-1989 Packing. Sacks made from thermoplastic flexible film. Description and method of measurement
JUS C.A4.084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)
JUS C.D1.011-1990 Copper and copper allojrs. Fire-refined tougb pltcb copper. Chemical composition and applicaticm directicms

General Motors Corporation (GM), toughness

GM 9984836-1998 Topcoat System - Flexible Solvent Borne Basecoat/2-K Clearcoat Revision A

Professional Standard - Machinery, toughness

JB/T 10646-2006 Super abrasive Determination of thermal impact toughness of diamond
JB/T 10987-2010 Superabrasive-Determination of toughness index of synthetic diamond
JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material
JB/T 6571-1993 Method for measuring impact ductility of man-made diamond and borazon

Canadian General Standards Board （CGSB), toughness

CGSB 1-GP-71 METH 135.2-1978 Methodes D'Essai Des Peintures Et Pigments Adherence Tenacite Et Adherence

AR-IRAM, toughness

IRAM 1547-1948

Professional Standard - Energy, toughness

NB/T 20230-2013 Fracture toughness requirements for materials uesd for coolant pressure boundary of pressurized water reactor

The Aluminum Association, toughness

AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

Professional Standard - Nuclear Industry, toughness

EJ/T 721-1992 Fracture Toughness Requirements of PWR Coolant Pressure Boundary Materials

Beijing Provincial Standard of the People's Republic of China, toughness

DB11/T 1891-2021 Guidelines for Earthquake Safety and Resilience Construction of Buildings (Structures) and Emergency Facilities

(U.S.) Ford Automotive Standards, toughness

FORD FLTM BN 102-05-2001 PLIABILITY OF SEAT BELT WEBBING (Replaces FLTM BN 002-05)

IT-UNI, toughness

UNI 7969-1979

ES-UNE, toughness

UNE-EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
UNE-EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility (Endorsed by AENOR in April of 2013.)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), toughness

IPC TM-650 2.4.3.1-1991 Flexural Fatigue and Ductility, Flexible Printed Wiring; Revision C - March 1991