ZH
RU
ES

d belt g belt

d belt g belt, Total:434 items.

In the international standard classification, d belt g belt involves: Flexible drives and transmissions, Materials for aerospace construction, Machine tool systems, Iron and steel products, Fasteners, Shipbuilding and marine structures in general, Springs, Ground service and maintenance equipment, Structures of buildings, Audio, video and audiovisual engineering, Bottles. Pots. Jars, Character sets and information coding, Cinematography, Telecommunication systems, Machine tools, Components and accessories for telecommunications equipment, Chipless working equipment, Terminology (principles and coordination), Clothes, Components for aerospace construction, Lamps and related equipment, Road vehicle systems, Water quality, Valves, Installations in buildings, Semiconducting materials, Electrical accessories, Cutting tools, Aerospace engines and propulsion systems.

Defense Logistics Agency, d belt g belt

DLA A-A-59568-2001 GAGES, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE [Superseded: DLA GG-G-91 D CANC NOTICE 2, DLA GG-G-91 D VALID NOTICE 1, DLA GG-G-91 D, DLA GG-G-91 C, DLA GG-G-91 B INT AMD 2, DLA GG-G-91 B]
DLA A-A-59461-2000 GRINDING AND SANDING MACHINE, PLATEN, ABRASIVE BELT, WET AND DRY [Superseded: DLA MIL-G-80176 B CANC NOTICE 2, DLA MIL-G-80176 B VALID NOTICE 1, DLA MIL-G-80176 B (1), DLA MIL-G-80176 B, DLA MIL-G-80176 A, DLA MIL-G-80176]
DLA A-A-55297-1999 SHIRT, MAN'S (POLYESTER/COTTON, TROPICAL, SHORT SLEEVE) [Superseded: DLA MIL-S-17618 H CANC NOTICE 1, DLA MIL-S-17618 H, DLA MIL-S-17618 G (1), DLA MIL-S-17618 G, DLA MIL-S-17618 F (1), DLA MIL-S-17618 F, DLA MIL-S-17618 D (2), DLA MIL-S-17618 E
DLA SMD-5962-84089 REV E-2009 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, QUAD D-TYPE FLIP-FLOP, WITH CLEAR MONOLITHIC SILICON
DLA SMD-5962-84099 REV H-2009 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, OCTAL, D-TYPE FLIP-FLOP WITH CLEAR, MONOLITHIC SILICON
DLA SMD-5962-87756 REV E-2010 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE FLIP-FLOP WITH MASTER RESET, MONOLITHIC SILICON
DLA SMD-5962-87626 REV C-2012 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, HEX D FLIP-FLOP WITH MASTER RESET, MONOLITHIC SILICON

International Telecommunication Union (ITU), d belt g belt

ITU-T G.711.1 AMD 4-2010 (Pre-Published) Wideband embedded extension for G.711 PCM: New Annex D with superwideband extension Amendment 4
ITU-T G.711.1 AMD 3-2010 Wideband embedded extension for G.711 pulse code modulation Amendment 3: Lossless compression of G.711 bitstreams in G.711.1 Study Group 16
ITU-T G.711.1 AMD 1-2014 Wideband embedded extension for ITU-T G.711 pulse code modulation - Amendment 1: New Annex G - An alternative implementation of stereo superwideband extension using floating-point
ITU-T G.711.1-2012 Wideband embedded extension for ITU-T G.711 pulse code modulation (Study Group 16)
ITU-T G.711.1 AMD 5-2011 Wideband embedded extension for G.711 pulse code modulation Amendment 5: New Appendix IV extending Annex D superwideband for mid-side stereo Study Group 16
ITU-T G.729.1 AMD 5-2008 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 5: New Annex D (Reference floating-point implementation for G.729.1 Annex C DTX/CNG) and corrections to the main body and Ann
ITU-T G.729.1 AMD 8-2013 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 8: New Annex G describing an alternative floating-point implementation of the superwideband monaural extension (Study Group 1
ITU-T G.729.1 AMD 7-2012 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 7: New Annex F with voice activity detector using ITU-T G.720.1 Annex A (Study Group 16)
ITU-T G.722.2 ANNEX D-2002 Wideband Coding of Speech at Around 16 kbit/s Using Adaptive Multi-Rate Wideband (AMR-WB) Annex D: Digital Test Sequences Series G: Transmission Systems and Media, Digital Systems and Networks Digital Terminal Equipments - Coding of Analogue Signals by M
ITU-T G.729.1 AMD 6-2010 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 6: New Annex E on superwideband scalable extension (Study Group 16)
ITU-T G.983.4 CORR 1-2005 A broadband optical access system with increased service capability using dynamic bandwidth assignment Corrigendum 1 SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system – Optical line systems for

U.S. Military Regulations and Norms, d belt g belt

ARMY MIL-DTL-11589/495 VALID NOTICE 3-2013 Ribbon, Eugene G. Fubini Award
ARMY MIL-H-13514 H-1992 HEATERS, SPACE, RADIANT TYPE, PORTABLE, 45,000 BTU/HR, (H-45) [Use In Lieu Of: ARMY MIL-H-0013514 G]

HU-MSZT, d belt g belt

国家市场监督管理总局、中国国家标准化管理委员会, d belt g belt

GB/T 24619-2021 Synchronous belt drives—Curvilinear profile systems G、H、R and S belts and pulleys

Society of Motion Picture and Television Engineers (SMPTE), d belt g belt

SMPTE 35M-1997 Television Analog Recording - 1/2-in Type G - Cassette and Tape
SMPTE ST 35M-1997 Television Analog Recording - 1/2-in Type G - Cassette and Tape
SMPTE 225M-2003 Television Digital Component Recording - 19-mm Type D-1 - Magnetic Tape
SMPTE 307M-2002 Television Digital Recording - 6.35-mm Type D-7 and Type D-12 Component Format - Tape Cassette
SMPTE ST 307M-2002 Television Digital Recording - 6.35-mm Type D-7 and Type D-12 Component Format - Tape Cassette
SMPTE ST 225M-2003 Television Digital Component Recording - 19-mm Type D-1 - Magnetic Tape
SMPTE 224M-2003 Television Digital Component Recording - 19-mm Type D-1 - Tape Record
SMPTE 246M-2003 Television Digital Recording - 19-mm Type D-2 Composite Format - Magnetic Tape
SMPTE ST 246M-2003 Television Digital Recording - 19-mm Type D-2 Composite Format - Magnetic Tape
SMPTE 368M-2002 Digital Television Tape Recording - 12.65-mm Type D-11 Format
SMPTE ST 368M-2002 Digital Television Tape Recording - 12.65-mm Type D-11 Format
SMPTE 317M-1999 Television Digital Recording - 12.65-mm Type D-9 Component Format - Tape Cassette
SMPTE ST 224M-2003 Television Digital Component Recording - 19-mm Type D-1 - Tape Record
SMPTE ST 317M-1999 Television Digital Recording - 12.65-mm Type D-9 Component Format - Tape Cassette
SMPTE 245M-1993 Television Digital Recording - 19-mm Type D-2 Composite Format - Tape Record
SMPTE ST 245M-1993 Television Digital Recording - 19-mm Type D-2 Composite Format - Tape Record
SMPTE 409M-2005 SMPTE 409M-2005 SMPTE STANDARD for Digital Television Tape Recording 12.65-mm Type D-16 Format
SMPTE EG 10-2003 Tape Transport Geometry Parameters for 19-mm Type D-1 Television Digital Component Recording
SMPTE ST 409M-2005 SMPTE 409M-2005 SMPTE STANDARD for Digital Television Tape Recording 12.65-mm Type D-16 Format

U.S. Air Force, d belt g belt

AIR FORCE MIL-B-5428 B NOTICE 2-1997 BELT, SAFETY, SHOULDER, HARNESS, TROOP, TYPE D-2
AIR FORCE MIL-B-5428 B-1982 BELT, SAFETY, SHOULDER, HARNESS, TROOP, TYPE D-2

German Institute for Standardization, d belt g belt

DIN 69881-5:1989-04 Tool holder with prism; form D with cylindrical seat
DIN 86025-2:1997 Fastening clamps with bracket - Part 2: Type C without insert, type D with insert
DIN 6331:2003-04 Hexagon collar nuts with a height of 1,5 d
DIN 95366:1996 Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G
DIN 86025-2:2010-04 Pipe clamps for shipboard use - Fastening clamps with bracket - Part 2: Type C without insert, Type D with insert
DIN 86025-2:2010 Pipe clamps for shipboard use - Fastening clamps with bracket - Part 2: Type C without insert, Type D with insert
DIN 6094-14:1995 Packaging - Finishes for bottles - Part 14: 8 G screw-thread for bottles with internal pressure
DIN 3017-5:2002 Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; Types D and E
DIN 1415-6:1970 Broaching tools; rectangular shanks G with perpendicular driving plane (for internal splines)
DIN 49339:1985 D-type fuse-bases D III 63 A up to 660 V, for back connection, with flange, for gauge rings
DIN EN 60774-5:2005 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 5: D-VHS (IEC 60774-5:2004); German version EN 60774-5:2004
DIN EN 61835:1999 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-5 (IEC 61835:1998); German version EN 61835:1998
DIN 15417:1982 Cranes; bottom blocks; type D rope pulleys with plain bearings
DIN 15417:1982-07 Cranes; bottom blocks; type D rope pulleys with plain bearings
DIN 41682:1955 Electric communication engineering; miniature fuses, g-series (G) fuse holders, 6 A, 60 V, for interchangeable g-series (G) fuse links with contact blades
DIN EN 62356-1:2005 Video recording - 12,65 mm type D-11 format - Part 1: Tape recording (IEC 62356-1:2003); German version EN 62356-1:2004
DIN EN 4695:2018-04 Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K; German and English version EN 4695:2017
DIN EN 62356-1:2005-03 Video recording - 12,65 mm type D-11 format - Part 1: Tape recording (IEC 62356-1:2003); German version EN 62356-1:2004
DIN 1415-6:1970-08 Broaching tools; rectangular shanks G with perpendicular driving plane (for internal splines)
DIN EN 61835:1999-05 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-5 (IEC 61835:1998); German version EN 61835:1998
DIN EN 60774-5:2005-06 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 5: D-VHS (IEC 60774-5:2004); German version EN 60774-5:2004
DIN EN 61016:2001 Helical-scan digital component video cassette recording system using 19 mm magnetic tape, format D-1; (IEC 61016:1989 + A1:1999); German version EN 61016:2000
DIN 49337:1985 D-type fuse-bases D II 25 A 500 V, for back connection, with flange, for gauge rings
DIN IEC 62447-1:2008-01 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 2: VTR specifications (IEC 62447-1:2007); Text in English
DIN 41572:1954 Telecommunication; miniature fuses, g-series (G) fuse links with contact blades, 60 V, interchangeable
DIN 43766:1986-03 Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1 mounting thread / Note: To be replaced by DIN 43735-3 (2005-04).
DIN EN 4694:2018-04 Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F; German and English version EN 4694:2017
DIN IEC 62447-2:2008-01 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 2: Compression format (IEC 62447-2:2007); Text in English
DIN EN 62141:2006-09 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 format (IEC 62141:2005); German version EN 62141:2006
DIN 69882-5:2005 Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions
DIN EN 62289:2004 Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression format D-10 (IEC 62289:2002); German version EN 62289:2003
DIN IEC 62447-3:2008-01 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 3: Data stream format (IEC 62447-3:2007); Text in English
DIN 43765:1986-03 Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1/2 mounting thread / Note: To be replaced by DIN 43735-3 (2005-04).
DIN ISO 10889-5:2006 Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat (ISO 10889-5:1997);English version of DIN ISO 10889-5:2006-01
DIN 3017-5:2023-07 Hose clamps - Part 5: Wide strip hose clamps with fastening lugs, shapes D and E
DIN EN 62071-1:2006-10 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 1: VTR specifications (IEC 62071-1:2005); German version EN 62071-1:2006 / Note: DIN EN 62071 (2001-09) remains valid alongside this standard until 20...
DIN 69882-8:2005 Tool holders with hollow taper shanks according to DIN 69893-1 - Part 8: Type G, shrink chuck - Dimensions
DIN EN 62071-2:2006-10 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format (IEC 62071-2:2005); German version EN 62071-2:2006 / Note: DIN EN 62071 (2001-09) remains valid alongside this standard until 20...
DIN EN 62071-3:2006-10 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 3: Data stream format (IEC 62071-3:2005); German version EN 62071-3:2006 / Note: DIN EN 62071 (2001-09) remains valid alongside this standard until 20...

(U.S.) Parachute Industry Association, d belt g belt

PIA PS22046C-2012 RING - PARACHUTE HARNESS "D" (MS22046)

Professional Standard - Aviation, d belt g belt

HB 2071-1974 With internal calipers D>30~80mm
HB 2070-1974 With internal calipers D=8~30mm
HB 3495-1985 End face countersink drill with guide pillar d＝2.5~15mm
HB 3502-1985 Conical countersink drill with guide pillar d＝2.4~12.9mm
HB 2844-1976 Quick change bushing with locking pin slot d=12~24
HB 7328-1996 Interference thread with table comb calipers d=3~45
HB 2842-1976 Quick change chuck with elastic bushing d=1~14
HB 3530-1985 Straight shank machine reamer with edge inclination d＝6~20mm
HB 3532-1985 Shell machine reamer with edge inclination d＝30~80mm
HB 4202-1989 Handle for single head with conical tail measuring head (D=2.5~21mm)
HB 793-1989 Double head with conical tail measuring head with handle (d=2.5~21mm)
HB 793-1974 Double head with conical tail measuring head with handle (d=2.5~21mm)
HB 2305-1976 Straight shank machine reamer with blade inclination D=6~20mm
HB 2306-1976 Tapered shank machine reamer with blade inclination D=10~32mm
HB 2307-1976 Sleeve type machine reamer with blade inclination D=30~80mm
HB 3531-1985 Taper shank machine reamer with edge inclination d＝10~32mm
HB 2414-1977 HB 243-70 threaded comb gauge d=3~30mm
HB 717-1979 Taper shank profiling end mill with roller D=25~50mm
HB 3497-1985 Four-blade end face shell countersink drill with guide pillar d＝10~40mm
HB 7329-1996 Measuring head of comb-shaped caliper with interference thread band table d=3~45
HB 2841-1976 Fixed-distance quick-change chuck with elastic bushing d=1~14
HB 2417-1977 HB 243-70 threaded comb-shaped caliper with table d=3~6mm
HB 7331-1996 The pair of watch parts d=8~30 for comb-shaped caliper with watch gauge with interference thread
HB 7330-1996 The pair of watch parts d=3~6 for the comb-shaped caliper with watch gauge with interference thread
HB 4622-1992 Six-tooth Morse taper shank profiling end mill with roller d=16~50mm
HB 7332-1996 The pair of gauges for the comb-shaped caliper with interference thread band gauge d=33~45
HB 2311-1976 Machine Reamer D=6~32mm with Rear Guide
HB 2245-1976 Slot Milling Cutter D=30~55mm for D=30~55mm
HB 3535-1985 Edge inclination straight shank machine reamer with rear leading part d＝6~9.5mm
HB 2310-1976 Straight shank machine reamer with blade inclination angle D=6~9.5mm with rear guide
HB 2336-1976 Open clamping bushing with Morse taper for tap d=4~28
HB 2418-1977 HB 243-70 Comb-shaped caliper with threaded table d=7~30mm
HB 2416-1977 HB 243-70 threaded comb-shaped caliper with table active measuring head d=3~30mm
HB 2415-1977 HB 243-70 threaded comb-shaped caliper with meter fixed measuring head d=3~30mm
HB 3448-1984 Non-holomorphy single head handled plain plug gauge used for IT6 to IT14 (D>80~180)
HB 7333-1996 Interference thread belt table comb-shaped caliper wear pair table d=3~6
HB 7334-1996 Interference thread belt table comb-shaped caliper wear pair table d=8~30
HB 7335-1996 Interference thread belt table comb-shaped caliper wear pair table d=33~45
HB 8205～8208-2002 Tee reducer,D type,with swivel nut,asymmetry,flared tube
HB 3449-1984 Non-holomorphy single head handled plain plug gauge used for IT7 to IT14 (D>180~250)
HB 8205-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8205)
HB 6794-1993 Inner diameter measuring head with positioning steps for 5000 times pneumatic measuring instrument (D≥8~14)
HB 6795-1993 Inner diameter measuring head with positioning steps for 5000 times pneumatic measuring instrument (D>14~30)
HB 3496-1985 Three-blade end face shell countersink drill with guide pillar for aluminum alloy machining d＝10~40mm
HB 8206-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8206)
HB 8207-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8207)
HB 8208-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8208)
HB 7336-1996 Comb-shaped calipers with gauges with interference threads are used for gauges, and the application size d=3~45
HB 2420-1977 Appraisal of HB 243-70 threaded band table comb-shaped caliper wear pair table parts d=7~30mm
HB 2421-1977 HB 243-70 threaded comb-shaped caliper for watch parts application size d=3~30mm
HB 6796-1993 5000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D≥8~14)
HB 6797-1993 5000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D>14~30)
HB 6802-1993 10000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D≥8~14)
HB 6803-1993 10000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D>14~30)
HB 2419-1977 Appraisal of HB 243-70 threaded band watch comb-shaped caliper wear pair watch parts d=3~6mm
HB 3456-1984 Hard alloy non-holomorphy single head handled plain plug gauge used for IT6 to IT14 (D>80~180)
HB 3457-1984 Hard alloy non-holomorphy single head handled plain plug gauge used for IT7 to IT14 (D>180~250)
HB 4149-1988 Tapered shank machine reamer d=6.0~20mm with rear guide for machining titanium alloy non-through holes
HB 4145-1988 Straight shank machine reamer d=6.0~9.5mm with rear guide for machining titanium alloy non-through holes
HB 4143-1988 Straight shank machine step reamer d=6.0~9.5mm with rear guide for processing titanium alloy through holes
HB 4147-1988 Stepped reamer d=6.0~20mm with tapered shank machine for processing titanium alloy through hole with rear guide

British Standards Institution (BSI), d belt g belt

BS ISO 13050:2014 Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
BS ISO 10889-5:1997 Tool holders with cylindrical shank - Type D with more than one rectangular seat
BS ISO 10889-5:1998 Tool holders with cylindrical shank. Type D with more than one rectangular seat
BS EN 60774-5:2005 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - D-VHS
BS EN 60774-5:2004 Helical-scan video tape cassette system using 12,65 mm (0.5 in) magnetic tape on type VHS-Part 5:D-VHS
21/30437912 DC BS ISO 13050. Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
BS ISO 26428-2:2009 Digital cinema (D-cinema) distribution master. Audio characteristics
BS ISO 26428-1:2009 Digital cinema (D-cinema) distribution master. Image characteristics
BS ISO 26428-1:2008 Digital cinema (D-cinema) distribution master - Image characteristics
BS ISO 26428-2:2008 Digital cinema (D-cinema) distribution master - Audio characteristics
BS EN 62071-1:2006 Helical-scan compressed digital video cassette system using 6, 35 mm magnetic tape - Format D-7 - VTR specifications
BS EN 61016:2001 Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
BS EN 62071-2:2006 Helical-scan compressed digital video cassette system using 6, 35 mm magnetic tape - Format D-7 - Compression format
BS 7568-29:1993 Press tools - Guide pillars - Type D, end-locking pillars with flange
BS ISO 9182-5:2013 Tools for pressing. Guide pillars. Type D, end-locking pillars with flange
BS EN 62071-3:2006 Helical-scan compressed digital video cassette system using 6, 35 mm magnetic tape - Format D-7 - Data stream format
BS ISO 9182-5:2023 Tools for pressing. Guide pillars - Type D, end-locking pillars with flange
BS EN 61327:1996 Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format D-3
BS EN 4695:2017 Aerospace series. Tie Rod with integrated bolts. Assembly Code G, H and K
BS ISO 8820-7:2007 Road vehicles - Fuse-links - Fuse-links with tabs (Type G) with rated voltage of 450 V
BS ISO 9182-5:2020 Tools for pressing — Guide pillars Part 5 : Type D, end - locking pillars with flange
BS 7F 8:1992 Specification for 140 g /m2 mercerized cotton fabrics and serrated edge strip for aerospace purposes
BS ISO 26428-3:2009 Digital cinema (D-cinema) distribution master. Audio channel mapping and channel labeling
BS EN 4694:2017 Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F
BS ISO 26428-3:2008 Digital cinema (D-cinema) distribution master - Audio channel mapping and channel labeling
BS EN 62071:2001 Helical-scan compressed digital video cassette recording system using 6,35mm magnetic tape - Forum D-7
BS EN 62289:2003 Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression - Format D-10

International Organization for Standardization (ISO), d belt g belt

ISO 13050:2014 Synchronous belt drives - Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
ISO 13050:2022 Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
ISO 9448-8:2013 Tools for pressing.Guide bushes.Part 8: Form G, gliding bushes, stepped, type 1
ISO 9448-8:1991 Tools for pressing; guide bushes; part 8: form G, gliding bushes, stepped, type 1
ISO/FDIS 9182-5 Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
ISO 26428-2:2008 Digital cinema (D-cinema) distribution master - Part 2: Audio characteristics
ISO 26428-1:2008 Digital cinema (D-cinema) distribution master - Part 1: Image characteristics
ISO 9182-5:2020 Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
ISO 9182-5:2023 Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
ISO 9448-5:2013 Tools for pressing.Guide bushes.Part 5: Form D, ball cage bushes, headed, type 1
ISO 9448-5:1991 Tools for pressing; guide bushes; part 5: form D, ball cage bushes, headed, type 1
ISO 9182-5:2013 Tools for pressing.Guide pillars.Part 5: Type D, end-locking pillars with flange
ISO 9182-5:1992 Tools for pressing; guide pillars; part 5: type D, end-locking pillars with flange
ISO 8820-7:2007 Road vehicles - Fuse-links - Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V

GM North America, d belt g belt

GM 9985292-2007 Adhesive, Tape, Strapping Revision D

Indonesia Standards, d belt g belt

SNI 3567 AMD 1-2011 Cold rolled steel sheets and strips (Bj D)

SE-SIS, d belt g belt

SIS SMS 2484-1967 V-betts. Section D. Power rating
SIS SMS 2490-1967 Length checking of V-belts Section Y, Z, A, B, C, D, E
SIS SMS 2476-1967 Calculation of V-helt drive Section Y, Z, A, B, C, D, E
SIS SMS 2489-1967 Checking oj V-belt sections Section Y, Z, A, B, C, D,E
SIS 82 21 02-1968 Wash-basins with wallbrackets. Type D with overflow
SIS SS 1257-1991 Fittings for piping — Intemally threaded long connections with pipe threads ISO 228- 1-G
SIS SS 1259-1991 Fittings forpiping — Internally threaded short connections with pipe threads ISO 228-1-G
SIS 82 21 04-1968 Wash-basins with wallbrackets. Type D without overflow
SIS SMS 2491-1967 V-belt pulleys. Machined grooves. Section Y.Z.A, B, C. D, E
SIS SMS 2492-1967 V-helt pulleys. Pitch diameters and ratios. Section Y, Z, A, B, C, D, E
SIS SS 1258-1991 Fittings for piping — Externally threaded short connections with pipe threads ISO 228- 1-G- or ISO 7- 1-R
SIS 11 21 14 E-1966 Dragprovstavar typ D

Professional Standard - Petroleum, d belt g belt

SY/T 6391-1999 SEG - D seismic tape format

Professional Standard - Aerospace, d belt g belt

QJ 340-1978 Center hole with large protective cone (d=0.7~3)
QJ 391-1978 Taper Shank with Guided Flat Bottom Countersink (D=14~32)
QJ 390-1978 Straight shank with guide flat bottom countersink (D=4~20)
QJ 337-1978 Straight groove composite center drill with cone protection (d=2.5~6)
QJ 414-1978 Non-full shape smooth plug gauge with guard plate (D=180~360)
QJ 448-1978 Non-full type smooth plug gauge handle with handle (D=100～180)
QJ 336-1978 Compound center drill with protective cone and spiral groove (d=1~2)
QJ 377.2-1989 Tungsten carbide tapered shank machine reamer with blade (d>10~32)
QJ 378.2-1989 Tungsten carbide bladed inclination sleeve machine reamer (d>30~80)
QJ 376.2-1989 Tungsten carbide straight shank machine reamer with edge inclination (d=6~12)
QJ 1159.6-1987 Smooth limit gauge type size single head with guard plate non-full shape plug gauge (D>180~315)

Association Francaise de Normalisation, d belt g belt

NF L55-561:1956 Uv lamps with ba 15D/17 cap and G 6 bulb (rech.).
NF L55-551:1956 Lamps with ba 15D/19 cap and G 16 1/2 (rech.).
NF C97-184:2001 Helical-scan compressed digital video cassette recording system using 6,35 mm magnetic tape - Format D-7.
NF C97-151-5*NF EN 60774-5:2005 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 5 : D-VHS.
NF EN 4695:2017 Série aérospatiale - Bielle avec axes intégrés - Code assemblage G, H et K
NF EN 62141:2006 Format d'enregistrement à balayage hélicoïdal pour cassette vidéo numérique utilisant une bande magnétique de 12,65 mm avec système de compression MPEG-4 - Format D-16
NF C97-176-1*NF EN 62356-1:2005 Video recording - 12,65 mm TYPE D-11 format - Part 1 : tape recording
NF L35-105*NF EN 4695:2017 Aerospace series - Tie rod with integrated bolts - Assembly code G, H and K
NF ISO 10889-5:2016 Porte-outil à queue cylindrique - Partie 5 : porte-outil de type D comportant plusieurs logements
NF ISO 7755-7:2021 Fraises-limes en métaux-durs - Partie 7 : fraises-limes ogives à bout pointu (forme G)
NF E66-550-5*NF ISO 10889-5:2016 Tool holders with cylindrical shank - Part 5 : type D with more than one rectangular seat
NF EN 4694:2017 Série aérospatiale - Bielle avec axes intégrés - Code assemblage D, E et F
NF C97-184-2*NF EN 62071-2:2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2 : compression format
NF L35-104*NF EN 4694:2017 Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F
NF ISO 5610-4:2014 Porte-plaquette à queue rectangulaire pour plaquettes amovibles - Partie 4 : forme D
NF C97-182*NF EN 62289:2004 Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression - Format D-10
NF EN 62071-3:2006 Système de magnétoscope numérique à cassette à balayage hélicoïdal à signal compressé utilisant une bande magnétique de 6,35 mm - Format D-7 - Partie 3 : format du flux de données

Group Standards of the People's Republic of China, d belt g belt

T/ZS 0331-2022 Technical specification for application of T63/E/G high-strength ribbed bars
T/GECS 004-2023 T63/E/G Technical specification for heat-treated ribbed high-strength reinforced concrete structures
T/SSACE 019-2023 Technical specification for application of heat-treatment high-strength ribbed bar (T63/E/G) in concretes structures

YU-JUS, d belt g belt

JUS Z.C1.688-1989 Hose caupling for fire fighting C—D-adapter
JUS Z.C1.674-1989 Hose coupling for fire fighting. Solid coupling D
JUS Z.C1.684-1989 Hose coupling for fire fighting. Blind coupling D

Danish Standards Foundation, d belt g belt

DS 751:1955 Fire proection. D-couplings for hoses
DS 759:1955 Fire protection. D-hose cap with metallic bearing surface
DS 756:1955 Fire protectopn. D-fixed coupling with rubber packing
DS/EN 60774-5:2005 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 5: D-VHS
DS/EN 61016:2002 Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
DS/EN 62071:2001 Helical-scan compressed digital video cassette recording system using 6,35 mm magnetic tape - Format D-7
DS/EN 62356-1:2005 Video recording - 12,65 mm type D-11 format - Part 1: Tape recording
DS/EN 61327:1998 Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-3
DS/EN 61835:1999 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-5
DS/EN 62071-2:2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format
DS/EN 62141:2006 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 format
DS/EN 62071-3:2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 3: Data stream format
DS/EN 62071-1:2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 1: VTR specifications
DS/EN 13079:2004 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D

International Federation of Trucks and Engines, d belt g belt

NAVISTAR TMS 4106-2000 Seat Belt Hardware - Corrosion Resistance (Revision D-1)

United States Navy, d belt g belt

NAVY A-A-59244-1998 DRILL, PNEUMATIC DRIFTER, SELF-PROPELLED, CRAWLER MOUNTED (TRACK DRILL) [Superseded: NAVY OO-D-2776 CANC NOTICE 1, NAVY OO-D-2776]
NAVY A-A-59216-1998 DITCHING MACHINES, BOOM TYPE; CRAWLER-MOUNTED, DED [Superseded: NAVY OO-D-2747 CANC NOTICE 1, NAVY OO-D-2747]

BR-ABNT, d belt g belt

ABNT PB-29-1979

AT-ON, d belt g belt

ONORM B 3020 Teil.5-1988 Planed timber proflies; tongued and grooved boards with wide groove effect (proflies E, F and G)
ONORM B 3020 Teil.10-1988 Planed timber proflies; tongued and grooved boards with round face (profll D)
ONORM F 2294-1988 Fire hose adaptor type C 52-D 25; requirements, testing, marking of conformity

IT-UNI, d belt g belt

NEMA - National Electrical Manufacturers Association, d belt g belt

NEMA C78.20-2003 Electric Lamps - A@ G@ PS@ and Similar Shapes with E26 Medium Screw Bases
NEMA C78.22-1995 Incandescent Lamps - A@ G@ PS@ and Similar Shapes with E39 Mogul Screw Bases
NEMA C78.22-1989 ELECTRIC LAMPS - INCANDESCENT LAMPS - A@ G@ PS@ AND SIMILAR SHAPES WITH E39 MOGUL SCREW BASES
NEMA C78.20-1989 ELECTRIC LAMPS - INCANDESCENT LAMPS - A@ G@ PS@ AND SIMILAR SHAPES WITH E26 MEDIUM SCREW BASES (SUPPLEMENT C78.20B - 1991)

SAE - SAE International, d belt g belt

SAE AMS3793/3C-2017 Tape and Webbing@ Textile@ Para-Aramid Intermediate Modulus 3/4 Inch (19 mm)@ 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m)
SAE AMS3795/1B-2016 Webbing@ Woven Nylon Fabric 6000 Pounds (26@700 N)@ 1.8 Ounces/Yards (56 g/m)
SAE AMS3795/2B-2016 Webbing@ Woven Nylon Fabric 9000 Pounds (40@050 N)@ 2.5 Ounces/Yards (77.5 g/m)
SAE AMS3894/14B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621) Tensile@ 40000000 (276) Modulus@ 175 (347)
SAE AMS3894/8C-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70000 (483) Tensile@ 36000000 (248) Modulus@ 80 (176)
SAE AMS3894/9C-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70000 (483) Tensile@ 36000000 (248) Modulus@ 175 (347)
SAE AMS3894/2C-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150000 (1034) Tensile@ 20000000 (138) Modulus@ 175 (347)
SAE AMS3894/3C-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150000 (1034) Tensile@ 19000000 (131) Modulus@ 80 (176)
SAE AMS3894/7C-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621) Tensile@ 40000000 (276) Modulus@ 80 (176)
SAE AMS3894/18A-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 355000 (2448) Tensile@ 22000000 (152) Modulus@ 130 (266)
SAE AMS3894/1C-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110000 (758) Tensile@ 27000000 (186) Modulus@ 175 (347)
SAE AMS3894/5C-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110000 (758) Tensile@ 27000000 (186) Modulus@ 80 (176)
SAE AMS3894/15B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200000 (1379) Tensile@ 21000000 (145) Modulus@ 175 (347)
SAE AMS3894/16B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200000 (1379) Tensile@ 21000000 (145) Modulus@ 175 (347)
SAE AMS3894/17B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200 (1379) Tensile@ 18.0 (124) Modulus@ 120 (248)
SAE AMS3894/13B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 131000 (903) Tensile@ 25000000 (172) Modulus@ 175 (347)
SAE AMS3894/15A-1989 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200@000 (1379) Tensile@ 21@000@000 (145) Modulus@ 175 (347)
SAE AMS3894/12B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200@000 (1379) Tensile@ 18@000@000 (124) Modulus@ 120 (248)
SAE AMS3894/11B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200@000 (1379) Tensile@ 18@000@000 (124) Modulus@ 80 (176)
SAE AMS3894/10B-2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 210@000 (1448) Tensile@ 20@000@000 (138) Modulus@ 175 (347)
SAE AMS3894/4A-1983 Graphite Fiber Tape and Sheet Epoxy Resin Impregnated G 150@000 (1034) Tensile@ 15@000@000 (103) Modulus@ 180 (82)
SAE AMS3894/6A-1983 Graphite Fiber Tape and Sheet Epoxy Resin Impregnated G 150@000 (1034) Tensile@ 15@000@000 (103) Modulus@ 350 (177)

CH-SNV, d belt g belt

SNV 137 202.4-1970
SNV 57610-1949
SN 211 602-1986 Wrought copper-nickel alloyschemical composition and forms of wrought products
SN 234 344-1978 Grundlage der vorliegenden Norm ist die von der internationa-len Organisation für Normung, ISO, herausgegebene Internatio-nale Norm ISO 1641/1 ■ 1978.
SN 219 505.8-1978 Weld preparation; juncture forms on steel, butt joint fusion welding of steel tubes.
VSM 77114-1948
VSM 18648.3-1964
SN 127 020-1985 The application of the term ?leather?
SNV 24730-1953
SN 640 628 b-1985

International Electrotechnical Commission (IEC), d belt g belt

IEC 60774-5:2004 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 5: D-VHS
IEC 61016:1989 Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
IEC 62447-1:2007 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 1: VTR specifications
IEC 62356-1:2003 Video recording - 12,65 mm type D-11 format - Part 1: Tape recording
IEC 62447-2:2007 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 2: Compression format
IEC 62447-3:2007 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 3: Data Stream Format
IEC 62289:2002 Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression - Format D-10
IEC 62071:2000 Helical-scan compressed digital video cassette recording system using 6,35 mm magnetic tape - Format D-7

US-GSA, d belt g belt

GSA GG-D-458 B INT AMD 2-1969 DISPENSER, PRESSURE-SENSITIVE ADHESIVE TAPE [Use In Lieu Of: GSA GG-D-00458 C (2)]

TIA - Telecommunications Industry Association, d belt g belt

TIA/EIA/IS-756-A-1998 TIA/EIA-41-D Enhancements for Wireless Number Portability Phase II

Korean Agency for Technology and Standards (KATS), d belt g belt

KS C IEC 62356-1-2005(2020) Video recording－12.65 mm TYPE D-11 format－Part 1：Tape recording
KS C IEC 62356-1:2005 Video recording－12.65 mm TYPE D-11 format－Part 1：Tape recording
KS A ISO 26428-11:2014 Digital cinema(D-cinema) distribution master ― Part 11: Additional frame rates
KS A ISO 26428-1:2010 Digital cinema(D-cinema) distribution master－Part 1：Image characteristics
KS A ISO 26428-2:2011 Digital cinema(D-cinema) distribution master－Part 2：Audio characteristics
KS B ISO 9182-5:2004 Tools for pressing Guide pillars - Part 5 Type D, end-locking pillars with flange
KS B ISO 9182-5:2009 Tools for pressing Guide pillars - Part 5 Type D, end-locking pillars with flange

NO-SN, d belt g belt

NS 5600-1984 Grooved pulleys for classical and narrow V-belts - Sections Y, Z, A, B, C, D, E, SPZ, SPA, SPB and SPC

Society of Automotive Engineers (SAE), d belt g belt

SAE AMS5042L-2003 Steel, Sheet and Strip 0.15 Carbon, Maximum Forming Grade UNS G 10100
SAE AMS3793/7B-2013 Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/2 Inch (37.5 Mm), 0.12 to 0.47 Ounces Per Yard (3.7 to 14.6 G/M)
SAE AMS3894/16A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 21,000,000 (145) Modulus, 175 (347)
SAE AMS3894/17A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200 (1379) Tensile, 18.0 (124) Modulus, 120 (248)
SAE AMS3894/5B-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 80 (176)
SAE AMS3894/15A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 21,000,000 (145) Modulus, 175 (347)
SAE AMS3894/2B-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus, 175 (347)
SAE AMS3894/13A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 131,000 (903) Tensile, 25,000,000 (172) Modulus, 175 (347)
SAE AMS3894/9B-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 175 (347)
SAE AMS3894/12A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 18,000,000 (124) Modulus, 120 (248)
SAE AMS3894/11A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 18,000,000 (124) Modulus, 80 (176)
SAE AMS3894/1B-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 175 (347)
SAE AMS3894/10A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 210,000 (1448) Tensile, 20,000,000 (138) Modulus, 175 (347)
SAE AMS3894/14A-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 175 (347)
SAE AMS3894/18-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 355,000 (2448) Tensile, 22,000,000 (152) Modulus, 130 (266)
SAE AMS3894/8B-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 80 (176)
SAE AMS3793/8B-2013 Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-3/4 Inch (44 Mm), 0.17 to 2.50 Ounces Per Yard (5.3 to 77.5 G/M)
SAE AMS3894/3B-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus, 80 (176)
SAE AMS3894/7B-2005 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 80 (176)
SAE AMS3782/3B-2013 Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.35 Ounce Per Linear Yard (14 G/Linear M)
SAE AMS3793/5B-1996 Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/8 Inches (28 mm), 0.23 to 2.00 Ounces per Yard (7.1 to 62.0 g/m) (Stabilized Type)
SAE AMS3894/17A-1994 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200 (1379) Tensile, 18.0 (124) Modulus, 120 (248)
SAE AMS3894/4B-1994 Graphite Fiber Tape and Sheet, Epoxy Resin Impregnated, G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 180 (82)
SAE AMS3894/5-1972 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 180 (82)
SAE AMS3894/4-1972 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 180 (82)
SAE AMS3894/1-1972 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 350 (177)
SAE AMS3894/6-1972 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 350 (177)
SAE AMS3894/6B-1994 Graphite Fiber Tape and Sheet, Epoxy Resin Impregnated, G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 350 (177)
SAE AMS3894/7-1974 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 170,000 (1172) Tensile, 40,000,000 (270) Modulus, 180 (82)
SAE AMS3894/3-1972 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus, 180 (82)
SAE AMS3894/2-1972 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus, 350 (177)
SAE AMS3899/1-1980 GRAPHITE FIBER TAPE AND SHEET Polysulfone Resin Impregnated G PS 170,000 (1172) Tensile, 16,000,000 (110) Modulus, 120 (250)
SAE AMS3899/2-1980 GRAPHITE FIBER TAPE AND SHEET Polysulfone Resin Impregnated G PS 140,000 (965) Tensile, 27,000,000 (186) Modulus, 120 (250)
SAE AMS3894/4B-1989 Carbon (Graphite) Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 80 (176)
SAE AMS3894/6B-1989 Carbon (Graphite) Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 175 (347)
SAE AMS3894/13-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 131,000 (903) Tensile, 25,000,000 (172) Modulus, 175 (350)
SAE AMS3894/11-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 200,000 (1380) Tensile, 18,000,000 (124) Modulus, 80 (180)
SAE AMS3894/12-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 200,000 (1380) Tensile, 18,000,000 (124) Modulus, 120 (250)
SAE AMS3894/14-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 90,000 (620) Tensile, 40,000,000 (275) Modulus, 175 (350)
SAE AMS3894/17-2011 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 200,000 (1380) Tensile, 18,000,000 (124) Modulus, 120 (250)
SAE AMS3894/2A-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus, 175 (350)
SAE AMS3894/7A-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 90,000 (620) Tensile, 40,000,000 (275) Modulus, 80 (180)
SAE AMS3894/5A-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 80 (180)
SAE AMS3894/10-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 210,000 (1450) Tensile, 20,000,000 (138) Modulus, 175 (350)
SAE AMS3894/15-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 200,000 (1380) Tensile, 21,000,000 (145) Modulus, 175 (350)
SAE AMS3894/8A-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 80 (180)
SAE AMS3894/9A-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 175 (350)
SAE AMS3894/16-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impreganted G 200,000 (1380) Tensile, 21,000,000 (145) Modulus, 175 (350)
SAE AMS3894/1A-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 175 (350)
SAE AMS3894/3A-1983 CARBON (GRAPHITE) FIBER TAPE AND SHEET Epoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus, 80 (180)
SAE AMS3793/11A-2013 Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/8 Inch (9.5 Mm), 0.035 Ounces Per Yard (1.09 G/M)

ES-UNE, d belt g belt

UNE-EN 62071:2001 Helical-scan compressed digital video cassette recording system using 6,35 mm magnetic tape - Format D-7. (Endorsed by AENOR in August of 2001.)
UNE-EN 62356-1:2004 Video recording - 12,65 mm TYPE D-11 format -- Part 1: Tape recording (Endorsed by AENOR in January of 2005.)
UNE-EN 60774-5:2004 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS -- Part 5: D-VHS (Endorsed by AENOR in December of 2004.)
UNE-EN 61016:2001 Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1) (Endorsed by AENOR in December of 2001.)
UNE-EN 4695:2017 Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN 61835:1998 HELICAN-SCAN DIGITAL COMPONENT VIDEO CASSETTE RECORDING SYSTEM USING 12,65 MM (0,5 IN) MAGNETIC TAPE - FORMAT D-5 (Endorsed by AENOR in February of 1999.)
UNE-EN 62071-1:2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 -- Part 1: VTR specifications (IEC 62071-1:2005) (Endorsed by AENOR in September of 2006.)
UNE-EN 4694:2017 Aerospace series - Tie Rod with integrated bolts - Assembly Code D, E and F (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN 62141:2006 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 format (IEC 62141:2005 ) (Endorsed by AENOR in September of 2006.)
UNE-EN 62071-3:2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 -- Part 3: Data stream format (IEC 62071-3:2005) (Endorsed by AENOR in September of 2006.)
UNE-EN 62289:2003 Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 Compression - Format D-10 (Endorsed by AENOR in December of 2003.)
UNE-EN 62071-2:2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 -- Part 2: Compression format (IEC 62071-2:2005). (Endorsed by AENOR in September of 2006.)

US-ACEI, d belt g belt

IPC TM-650 2.4.1-1997 Adhesion, Tape Testing Revision D(Test Methods Manual)

American National Standards Institute （ANSI), d belt g belt

BS ISO 13050:2022 Tracked Changes. Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys (British Standard)
ANSI C78.22-1995 Incandescent Lamps – A, G, PS, and Similar Shapes with E39 Mogul Screw Bases
ANSI C78.20-2003 Incandescent Lamps - A, G, PS, and Similar Shapes with E26 Medium Screw Bases

RO-ASRO, d belt g belt

STAS 9283-1976 PUNCHED TAPE BLOCK FORMATS FOR NUMERICAL CONTROL MACHINES Coding of functions G and M
STAS 2584-1971 llot vaier iustallations HORIZONTAL BOILERS W'ITH HORIZONTAL TUBE IIEATING ELEMENTS NT G and NT 10
STAS 7918/2-1987 Torque indicator handle wrenches with elastic element CLICK TYPE D TORQUE WRENCHES Dimensions

CZ-CSN, d belt g belt

CSN ON 11 1036-1966
CSN 30 3715-1985 Drop centre rims with flange contours D, E, F and check gauges. Dimensions.

AENOR, d belt g belt

UNE-EN 61327:1998 HELICAL-SCAN DIGITAL COMPOSITE VIDEO CASSETTE RECORDING SYSTEM USING 12,65 MM (0,5 IN) MAGNETIC TAPE. FORMAT D-3.

European Committee for Standardization (CEN), d belt g belt

EN 4695:2017 Aerospace series - Tie Rod with integrated bolts - Assembly Code G@ H and K
EN 13079:2003 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A; Type D
EN 4694:2017 Aerospace series - Tie rod with integrated bolts - Assembly code D@ E and F

CENELEC - European Committee for Electrotechnical Standardization, d belt g belt

EN 62071:2001 Helical-Scan Compressed Digital Video Cassette Recording System Using 6@35 mm Magnetic Tape - Format D-7

PL-PKN, d belt g belt

PN S91240-43-1986 Pneumatic wheels Profile gaugcs for drop center rimswith flanges D, E and F
PN S91240-22-1986 Pneumatic wheels Drop center rims with flanges D, E and F rofiles and main dimensions

KR-KS, d belt g belt

KS B ISO 9182-5-2004 Tools for pressing Guide pillars - Part 5 Type D, end-locking pillars with flange

BE-NBN, d belt g belt

Underwriters Laboratories (UL), d belt g belt

UL 1277 CRD-2017 UL Standard for Safety Electrical Power and Control Tray Cables with Optional Optical-Fiber Members - Section / Paragraph Reference: 29@ 29.1@ d)2)@ f)@ g)@ n)@ o)@ r)@ 29.2 a)@ b)@ c)@ 29.3 c) (NEW)@ 29.4 Subject: Marker Tape (Edition 5: April 21@ 2010)

Aerospace Industries Association/ANSI Aerospace Standards, d belt g belt

AIA/NAS NASM16995-2010 SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNC-3A Rev 1 [Superseded: DLA MS16995 REV H CANC NOTICE 1, DLA MS16995 REV H, DLA MS16995 REV G, DLA MS16995 REV F, DLA MS16995 REV E, DLA MS16995 REV D, DLA MS16995 REV C]

Lithuanian Standards Office , d belt g belt

LST EN 60774-5-2004 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. Part 5: D-VHS (IEC 60774-5:2004)
LST EN 62071-2002 Helical-scan compressed digital video cassette recording system using 6,35 mm magnetic tape. Format D-7 (IEC 62071:2000)
LST EN 61016-2002 Helical-scan digital component video cassette recording system using 19 mm magnetic tape, (format D-1) (IEC 61016:1989+A1:1999)
LST EN 61835-2001 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format D-5 (IEC 61835:1998)
LST EN 62071-1-2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 1: VTR specifications (IEC 62071-1:2005)
LST EN 62141-2006 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 format (IEC 62141:2005)
LST EN 62071-2-2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format (IEC 62071-2:2005)
LST EN 61327-2001 Helical-scan digital composite video cassette recording system using 12, 65 mm (0, 5 in) magnetic tape. Format D-3 (IEC 61327:1995)
LST EN 62071-3-2006 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 3: Data stream format (IEC 62071-3:2005)
LST EN 62356-1-2004 Video recording. 12,65 mm TYPE D-11 format. Part 1: Tape recording (IEC 62356-1:2003)
LST EN 13079-2004 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
LST EN 62289-2004 Video recording. Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 Compression. Format D-10 (IEC 62289:2002)

American Society of Mechanical Engineers (ASME), d belt g belt

ASME SEC III D1 NMA APP F-2003 Appendix F Rules for Evaluation of Service Loadings with Level D Service Limits

European Committee for Electrotechnical Standardization（CENELEC）, d belt g belt

EN 61016:2001 Helical-Scan Digital Component Video Cassette Recording System Using 19 mm Magnetic Tape (Format D-1)
EN 60774-5:2004 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS Part 5: D-VHS
EN 62356-1:2004 Video recording 12,65 mm TYPE D-11 format Part 1: Tape recording

IN-BIS, d belt g belt

IS 3142-1993 Pulleys. V-grooved pulleys for endless v-belts sections Z, A, B, C, D and E and endless wedge belts sections spz, spa,spb and spc. Specification (Second Revision)

Institute of Electrical and Electronics Engineers (IEEE), d belt g belt

SMPTE ST 307:2002 ST 307:2002 - SMPTE Standard - For Television Digital Recording — 6.35-mm Type D-7 and Type D-12 Component Format — Tape Cassette
ST 307:2002 ST 307:2002 - SMPTE Standard - For Television Digital Recording — 6.35-mm Type D-7 and Type D-12 Component Format — Tape Cassette
SMPTE ST 409:2005 ST 409:2005 - SMPTE Standard - For Digital Television Tape Recording — 12.65-mm Type D-16 Format
ST 409:2005 ST 409:2005 - SMPTE Standard - For Digital Television Tape Recording — 12.65-mm Type D-16 Format
ST 225:2003 ST 225:2003 - SMPTE Standard - For Television Digital Component Recording — 19-mm Type D-1 — Magnetic Tape
ST 368:2002 ST 368:2002 - SMPTE Standard - For Digital Television Tape Recording — 12.65-mm Type D-11 Format

Aerospace, Security and Defence Industries Association of Europe (ASD), d belt g belt

ASD-STAN PREN 4695-2015 Aerospace series Tie rod with integrated bolts Assembly code G, H and K (Edition P 2)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, d belt g belt

PREN 4695-2012 Aerospace series Tie rod with integrated bolts Assembly code G@ H and K (Edition P 1)
PREN 4695-2015 Aerospace series Tie rod with integrated bolts Assembly code G@ H and K (Edition P 2)

RU-GOST R, d belt g belt

GOST R 51688-2000 Hollow taper shank with flat contact surface (HSK) of tools. Types B and D. Basic dimensions

Professional Standard - Military and Civilian Products, d belt g belt

WJ 1107-1979 Smooth surface gauge and technical conditions Non-full-shaped plug gauge with handle (D=50~180mm) (limited standard)

Professional Standard - Machinery, d belt g belt

JB/T 3208-1999 Numerical control of machines.Punched tape formats-coding of preparatory functions G and miscellaneous functions M

(U.S.) Telecommunications Industries Association , d belt g belt

TIA-735-2002 Enhancements to TIA/EIA-41-D& TIA/EIA-664 for Advanced Features in Wideband Spread Spectrum Systems

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, d belt g belt

ITU-T G.722.2 ANNEX D-2017 Wideband coding of speech at around 16 kbit/s using Adaptive Multi-Rate Wideband (AMR-WB) Annex D: Digital test sequences (Study Group 16)