ZH
RU
ES

polyethylene glycol filling

polyethylene glycol filling, Total:427 items.

In the international standard classification, polyethylene glycol filling involves: Organic chemicals, Products of the chemical industry, Medical equipment, Textile fibres, Plastics, Rubber and plastics products, Materials for aerospace construction, Kitchen equipment, Materials and articles in contact with foodstuffs, Products of the textile industry, Aircraft and space vehicles in general, Packaging materials and accessories, Seals, glands, Packaging and distribution of goods in general, Bottles. Pots. Jars, Photography, Spices and condiments. Food additives, Protection against dangerous goods, Coatings and related processes used in aerospace industry, Aerospace electric equipment and systems, Insulating materials, Components and accessories for telecommunications equipment, Raw materials for rubber and plastics, Wastes, Compressors and pneumatic machines, Shipbuilding and marine structures in general, Pharmaceutics, Reinforced plastics, Environmental protection, Food products in general, Construction materials, Paint ingredients, Pipeline components and pipelines, Analytical chemistry, Audio, video and audiovisual engineering, Capacitors.

GM North America, polyethylene glycol filling

GM GMP.PC+PETP.007-1999 PC+PETP - 20% Glass Filled
GM GMP.PETP.006-1994 PETP - 40% Glass Fiber Reinforced/Mineral Filled
GM GMP.PBT+PET.001-1998 PBT+PET - 30% Glass Fiber Reinforced/Mineral Filled, Weatherable
GM GMP.PETP.003-1989 PETP - 35% Glass and Mineral Filled, Impact Modified
GM GMP.PBT+PET.003-1998 PBT+PET - 40% Glass Fiber Reinforced/Mineral Filled, 9200 MPa Flexural Modulus
GM GMP.PBT.028-1998 PBT - 45% Glass Fiber Reinforced/Mineral Filled
GM GMP.POM.014-1994 Acetal - Homopolymer, 20% PTFE Fiber Filled
GM GMP.PBTP.018-2000 PBTP - 30% Mineral Filled
GM GMP.POM.011-2000 Acetal - Lubricated, 20% PTFE Filled
GM GMP.POM.043-2002 13% Carbon Powder Filled Acetal - Homopolymer
GM GMP.POM.015-1994 Acetal - Homopolymer, 20% Glass Fiber Reinforced
GM GMP.PETP.002-1992 PETP - 30% Glass Fiber Reinforced
GM GMP.PETP.004-1989 PETP - 45% Glass Fiber Reinforced
GM GMP.PETP.008-1992 PETP - 35% Glass Fiber Reinforced
GM GMP.PA66.008-1999 Nylon 66 - 20% PTFE Filled, Heat Stabilized
GM 9986139-2014 Grease, PTFE Filled Synthetic (Issue 2)
GM GMP.PA66+PPE.011-1999 Nylon 66 + Polyphenylene Ether - 10% Glass Filled
GM GMP.PE.017-2003 Polyethylene 25% Filled, High Density, Sheet Extrudable, Blow Moldable, Homopolymer
GM GMP.PC+PETP.005R-1998 PC+PET Alloy - Recycled, Heat Stabilized
GM GMP.PA66.082-1999 Nylon 66 - Aramid Fiber Reinforced, Teflon Filled, Heat Stabilized
GM GMP.PE.002-1988 Polyethylene - High Density, 25% Mica Filled, Chemically Coupled, Blow Moldable,Homopolymer
GM GMP.PE.010-1989 Polyethylene - High Density, 20% Mica Filled, Chemically Coupled, Blow Moldable Homopolymer
GM GMP.PETP.012-2001 PETP - 30% Glass Fiber Reinforced, Impact Modified
GM 9985581-2015 Adhesive, Tape, Clear Polyethylene Terephthalate (PET) (Issue 4)
GM GMP.POM.027-1998 Acetal - Copolymer, 20% Glass Fiber Reinforced, Chemically Coupled
GM GMP.PE.018-1998 Polyethylene - 20% Glass Filled, Chemically Coupled, High Density, Injection Molding Grade
GM GMP.PETP.001-1995 PETP - 30% Glass Fiber Reinforced, Flame Retardant (V-0)
GM GMP.PPS.006-1996 Poly(Phenylene Sulfide) - 57% Glass Fiber Reinforced/Mineral Filled
GM GMP.PA66.017-2000 Nylon 66 - 30% Glass Fiber Reinforced, 15% PTFE Filled, Heat Stabilized

ES-AENOR, polyethylene glycol filling

UNE 17 042

United States Navy, polyethylene glycol filling

NAVY DOD-S-82708 NOTICE 1-1992 SEALING COMPOUND, PREFORMED (METRIC)

Group Standards of the People's Republic of China, polyethylene glycol filling

T/CPCIF 0253-2023 Vinyl（ether）polyethylene glycol（VPEG）， Vinyloxy-butyl（ether）polyethylene glycol（VBPEG）
T/SDSCCE 017-2022 Reclaimed polyethylene glycol (PEG 400)
T/YNZJ 005-2022 Polyethylene terephthalate (PET) barrel (bottle)
T/GDEIA 01-2019 Polyethylene terephthalate Transfer film
T/ZZB 0915-2018 Polyethylene terephthalate (PET) disposable cup
T/CTES 1052-2022 Glycol-based colorants for in-situ polymerization dyeing of polyester fiber
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/CI 058-2022 Polyethylene terephthalate（PET）containers for food packaging
T/ZZB 2060-2021 Polyethylene glycol terephthalate（ PET） color master batch for optical reflective film
T/SZTIA 002-2020 Textiles－Quantitative analysis of PTT and PET mixture－DSC method
T/CSRA 21-2022 Plastic composition test Polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), ethylene-vinyl acetate copolymer (EVA), polyethylene terephthalate in plastic products Esters (PET) Qualitative Analysis Method
T/ZZB 3090-2023 Primer-coated Optical polyethylene terphthalate(PET) base brightness enhancement film
T/ZZB 1565-2020 PET Silver antibacterial color master batch used for textile fibre
T/CRRA 0307-2023 Quality grading evaluation and acceptance for waste PET bottle brick
T/CSBME 032-2021 Technical requirements for raw materials of medical four-arm polyethylene glycol succinimide glutarate
T/YBL 003-2018 Preparation and quantitative calculation of acetaldehyde detection sample in polyethylene terephthalate (PET) bottles
T/CPCIF 0038-2020 Technical specification for green-design product assessment— Polyethylene terephthalate resin

Military Standard of the People's Republic of China-General Armament Department, polyethylene glycol filling

GJB 5002-2003 Polyethylene glycol specifications
GJB 8280-2014 Specification for PTFE plate filled with poly (phenyl p-hydroxybenzoate)
GJB 8279-2014 Specification for PTFE bar filled with poly (phenyl p-hydroxybenzoate)
GJB 8278-2014 Specification for PTFE pipes filled with poly (phenyl p-hydroxybenzoate)

(U.S.) Ford Automotive Standards, polyethylene glycol filling

FORD ESK-M4D424-A2-1986 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND, 12% MINERAL FILLED
FORD ESB-M4D354-A2-1984 POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - INTERNALLY LUBRICATED
FORD WSK-M4D837-A-2006 POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS SPHERE FILLED MOLDING COMPOUND
FORD WSF-M4D809-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT), 20% PTFE POWDER FILLED EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D420-A-1984 ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED
FORD ESA-M4D465-A1-1988 TUBING, PTFE - GLASS SPHERE FILLED
FORD ESF-M4D341-C-2005 POLYESTER, THERMOPLASTIC (PBT), 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M4B26-A-1990 POLYALKALINE GLYCOL WATER, QUENCH ADDITIVE
FORD ESE-M9G32-A-2012 WAX, POLYETHYLENE GLYCOL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D169-A2-1978 ACETAL RESIN, 15% PTFE FILLED
FORD ESF-M4D575-A-2005 POLYBUTYLENE TEREPHTHALATE (PBTP), TI02 FILLED - HIGH LIGHT REFLECTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D575-A-2010 POLYBUTYLENE TEREPHTHALATE (PBTP), Ti02 FILLED - HIGH LIGHT REFLECTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D852-A-2006 ACETAL (POM) COPOLYMER, MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND
FORD ESK-M2G269-A-1988 ADHESIVE STYRENE BUTADIENE, HOT MELT, FILLED
FORD WSS-M4D929-A3-2006 POLYBUTYLENE TEREPHTHALATE, 30 % GLASS FILLED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D354-A3-2005 POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M9G32-A-2006 WAX, POLYETHYLENE GLYCOL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D354-A1-2005 POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1068-A1-2021 POLYBUTYLENE TEREPHTHALATE (PBT) + POLYETHYLENE TEREPHTHALATE (PET), 55% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D852-A-2010 ACETAL (POM) COPOLYMER, MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D420-B-1984 ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED, Shown on ESA-M4D420-A
FORD ESB-M4D354-A2-2010 POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - INTERNALLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D465-A2-1988 TUBING, PTFE - POLYPHENYLENE SULFIDE FILLED Shown on ESA-M4D465-A1
FORD ESB-M4D357-A-1978 ACETAL COPOLYMER, GLASS FILLED - GLASS TO COPOLYMER - CHEMICALLY COUPLED
FORD WSB-M4D921-A-2006 POLYBUTYLENE TEREPHTHALATE + POLYETHYLENE TEREPHTHALATE BLEND (PBT +PET), 30 % GLASS/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D465-A1-2011 TUBING, PTFE - GLASS SPHERE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D420-A-2010 ACETAL, COPOLYMER, - 20% TETRAFLUOROETHYLENE (TFE) FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D354-A4-2005 POLYBUTYLENE TEREPHTHALATE, 26% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M4D354-A3
FORD ESA-M4D370-A-2005 POLYTETRAFLUOROETHYLENE, 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D375-A-2005 POLYTETRAFLUOROETHYLENE - 10% GRAPHITE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M4D370-B-2005 POLYTETRAFLUOROETHYLENE, 25% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D370-A-2009 POLYTETRAFLUOROETHYLENE, 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D375-A-2009 POLYTETRAFLUOROETHYLENE - 10% GRAPHITE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D357-A-2009 ACETAL COPOLYMER, GLASS FILLED - GLASS TO COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M4D370-B-2009 POLYTETRAFLUOROETHYLENE, 25% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D341-C-2009 POLYESTER, THERMOPLASTIC (PBT), 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4D405-B-2010 POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Light Industry, polyethylene glycol filling

QB/T 2974-2008 Polyethylene glycol monomethyl ether
QB/T 1868-2004 Polyethylene terephthalate (PET) bottle for carbonation drink
QB/T 2665-2004 Heat-resistant polyethylene terephthalate (PET) bottle

RO-ASRO, polyethylene glycol filling

STAS 12826-1990 TECHNICAL POLYETHYLENE GLYCOLS
STAS 9178/1-1987 Converted complex papers for presentation packings WATERED PAPER OBTAINED BY PASTING WITH POLYVINYL ACE- TATE (ARACET)

Professional Standard - Chemical Industry, polyethylene glycol filling

HG/T 4134-2010 Polyethylene glycols for industrial use
HG/T 5869～5871-2021 Green Design Product Evaluation Technical Specifications for Polystyrene Resin, Polybutylene Terephthalate (PBT) Resin and Polyethylene Terephthalate (PET) Resin (2021)
HG/T 3025-1986(1997) Determination of water content of poly(ethylene terephthalate)granules
HG/T 3025-1986 Determination of water content of poly(ethylene terephthalate)granules
HG/T 4607-2014 Optical grade polyester film.Polyethylene terephthalate (PET) film with primer
HG/T 5076-2016 Antistatic polyethylene terephthalate (PET) film (For external protection)
HG/T 6008～6010-2022 Light Stabilizer Poly(4-Hydroxy-2,2,6,6-Tetramethyl-1-Piperidine Ethanol) Ester
HG/T 5303～5305-2018 Photosensitive materials Polytetramethylene glycol 250-bis(4-benzoylphenoxyacetic acid) ester, 4-(dimethylamino)benzoic acid-(2-ethyl)hexyl ester and 4-dimethylaminobenzoic acid ethyl ester ( 2018)

IN-BIS, polyethylene glycol filling

工业和信息化部, polyethylene glycol filling

HG/T 4134-2022 Industrial Polyethylene Glycol (PEG)
HG/T 5506-2018 White polyethylene terephthalate (PET) reflective film
HG/T 5297-2018 Diffusion composite polyethylene terephthalate (PET) film
QB/T 5076-2017 Heat sealable biaxially oriented polyethylene terephthalate film
HG/T 5303-2018 Photosensitive material polybutylene glycol 250-bis(4-benzoylphenoxyacetate)
HG/T 5660-2019 Optical grade polyester film-coated anti-static polyethylene terephthalate (PET) film
QB/T 5077-2017 Biaxially oriented polyethylene terephthalate film for thermal transfer ribbons
HG/T 5656-2019 Pre-coated base polyethylene terephthalate (PET) film for optical grade polyester film brightness enhancement film
JB/T 13632-2019 Filled PTFE piston rings for oil-free reciprocating piston compressors
JBT13632-2019 Filled PTFE piston rings for oil-free reciprocating piston compressors
HG/T 4949-2016 Clear optical polyethylene terephthalate (PET) hardened film for in-mold decoration (IMD)
HG/T 5871-2021 Technical specification for green design product evaluation polyethylene terephthalate (PET) resin
HG/T 6008-2022 Light stabilizer polysuccinate (4-hydroxy-2,2,6,6-tetramethyl-1-piperidineethanol) ester
HG/T 4950-2016 Matte polyethylene terephthalate (PET) hardened film for indium tin oxide (ITO) coating
HG/T 5299-2018 Transparent polyethylene terephthalate (PET) hardened film for indium tin oxide (ITO) coating

未注明发布机构, polyethylene glycol filling

GJB 5264-2003 Polyethylene Glycol (PEG) Specifications
BS 6564-3:1990(1999) Polytetrafluoroethylene (PTFE) materials and products — Part 3 : Specification for E glass fibre filled polytetrafluoroethylene
SAE AMS3670/2B-2006 Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled

American Society for Testing and Materials (ASTM), polyethylene glycol filling

ASTM F2313-03 Standard Specification for Virgin Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70% Glycolide
ASTM F2313-08e1 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
ASTM E2470-22 Standard Specification for Polyester Grade Ethylene Glycol
ASTM E2470-09(2015) Standard Specification for Polyester Grade Ethylene Glycol
ASTM E2470-07 Standard Specification for Polyester Grade Ethylene Glycol
ASTM E2470-09(2015)e1 Standard Specification for Polyester Grade Ethylene Glycol
ASTM D5047-95(2003) Standard Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D5047-17 Standard Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D5047-09 Standard Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D5047-17(2023) Standard Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D5991-17 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
ASTM E2664-22 Standard Practice for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
ASTM E2664-09 Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
ASTM D5991-15 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
ASTM D5991-23 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
ASTM E2664-16 Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
ASTM D4745-08 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4745-11a Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4745-11ae1 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D7409-07e1 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ASTM D7409-15 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ASTM D7409-07 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ASTM D740-94(2001) Standard Specification for Methyl Ethyl Ketone
ASTM D8195-18 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
ASTM D7409-15(2020) Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ASTM D4745-06 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4745-01 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4745-97 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4745-11 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM F891-00e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM F891-00 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM UOP1021-19 Determination of Trace Methyl Mercaptan, Ethyl Mercaptan, and Isopropyl Disulfide in Polymer Grade Ethylene and Propylene by Gas Chromatography Mass Spectrometry

General Motors Corporation (GM), polyethylene glycol filling

GM 9985793-1993 Grease, Polyethylene Filled for Gas Rods
GM 9985898-1992 Grease, PTFE Filled Bentone
GM 9984147-1991 Coating, Moldable Rigid Paint System on Polyethylene Terephthalate Glycol Film for Exterior Parts
GM 9985830-1991 Lubricant - Grease, Teflon Filled for Automotive Hardware Shown on GM9981722

Professional Standard - Agriculture, polyethylene glycol filling

2245药典二部-2010 Part II Seventeen Draws PEG 600
2249药典二部-2010 Part II Seventeen Draws PEG 6000
2247药典二部-2010 Part II Seventeen Draws PEG 1500
2246药典二部-2010 Part II Seventeen Draw PEG 1000
2248药典二部-2010 Part II Seventeen Draws PEG 4000
2244药典二部-2010 Part II Seventeen Draws PEG 400
646药典第一增补本-2010 Varieties of polyvinyl alcohol revised in Part II
2250药典二部-2010 The second part seventeen draw polyvinyl alcohol
704兽药典一部-2015 Text Variety Part II Fourteen Draws Polyethylene Glycol 1000
707兽药典一部-2015 Text Variety Part II Fourteen Draws PEG 400
711兽药典一部-2015 Text Variety Part II Fourteen Draws Polyethylene Glycol 6000
709兽药典一部-2015 Text Variety Part II Fourteen Draws Polyethylene Glycol 4000
710兽药典一部-2015 Text Variety Part II Fourteen Draws Polyethylene Glycol 600
705兽药典一部-2015 Text Variety Part II Fourteen Draws Polyethylene Glycol 1500
565药典四部-2015 Pharmaceutical excipients name fourteen strokes polyethylene glycol 400
568药典四部-2015 Pharmaceutical excipients Product Name Fourteen-drawing Polyethylene Glycol 600
567药典四部-2015 Pharmaceutical excipients name fourteen strokes polyethylene glycol 4000
563药典四部-2015 Pharmaceutical excipients name fourteen strokes polyethylene glycol 1500
569药典四部-2015 Pharmaceutical excipients Product Name Fourteen-drawing Polyethylene Glycol 6000
562药典四部-2015 Pharmaceutical excipients Product Name Fourteen-drawing Polyethylene Glycol 1000
645药典四部-2020 Pharmaceutical excipients name fourteen strokes polyethylene glycol 400
649药典四部-2020 Pharmaceutical excipients name fourteen strokes polyethylene glycol 1500
651药典四部-2020 Pharmaceutical excipients Product Name Fourteen-drawing Polyethylene Glycol 6000
650药典四部-2020 Pharmaceutical excipients name fourteen strokes polyethylene glycol 4000
648药典四部-2020 Pharmaceutical excipients Product Name Fourteen-drawing Polyethylene Glycol 1000
647药典四部-2020 Pharmaceutical excipients Product Name Fourteen-drawing Polyethylene Glycol 600
181药典三部-2010 Appendix Ⅵ Ⅵ G Determination of polyethylene glycol residues
712兽药典一部-2015 Text Variety Part Two Fourteen Paintings Polyvinyl Alcohol
706兽药典一部-2015 Text Variety Part Two Fourteen Draws Polyethylene Glycol 300 (For Injection)
708兽药典一部-2015 Text Variety Part Two Fourteen Draws Polyethylene Glycol 400 (For Injection)
564药典四部-2015 Pharmaceutical excipients Product name Fourteen-drawing polyethylene glycol 300 (for injection)
566药典四部-2015 Pharmaceutical Excipients Product Name Fourteen-drawing Polyethylene Glycol 400 (For Injection)
644药典四部-2020 Pharmaceutical excipients Product name Fourteen-drawing polyethylene glycol 300 (for injection)
646药典四部-2020 Pharmaceutical Excipients Product Name Fourteen-drawing Polyethylene Glycol 400 (For Injection)
114兽药质量标准汇编(2006至2011年)-2012 Domestic veterinary drug standard polyethylene glycol bovine hemoglobin conjugate
664兽药典一部-2015 Text Varieties Part II Eleven Drawings Vitamin E Polyethylene Glycol Succinate
257药典三部-2020 Determination of chemical residues 3202 Determination of polyethylene glycol residues
223药典四部-2015 3200 Determination of Chemical Residues 3202 Determination of Polyethylene Glycol Residues
214药典四部-2020 3200 Determination of Chemical Residues 3202 Determination of Polyethylene Glycol Residues
27药典三部-2020 General Introduction to Pegylated Recombinant Protein and Peptide Products for Human Use
522药典四部-2015 Pharmaceutical Excipients Name Eleven Draw Vitamin E Polyethylene Glycol Succinate
594药典四部-2020 Pharmaceutical Excipients Name Eleven Draw Vitamin E Polyethylene Glycol Succinate
234药典三部-2015 Determination of Chemical Residues 3202 General Principles of Determination of Polyethylene Glycol Residues 72

GM Daewoo, polyethylene glycol filling

GMKOREA EDS-M-4325-2012 10% Talc Filled Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-5571-2004 30% GLASS FIBER REINFORCED POLYBUTYLENE TEREPHTHALATE/ POLYETHYLENE TEREPHTHALATE

PL-PKN, polyethylene glycol filling

PN C83200-1989 Polyethylene glycols Determinatiori of the hydroxyl value
PN T90336-1992 Local quad unit type filled cables with polyethylene insulation and moisture barrier polyethylene sheath,unarmoured or armoured with polyethylene or polyvinylchloride outer covering
PN-EN 16809-1-2020-04 P Thermal insulation products of buildings -- In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads -- Part 1: Specification for the bonded and loose-fill products before installation
PN-EN 16809-1-2020-04/Ap1-2021-08 E Thermal insulation products of buildings -- In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads -- Part 1: Specification for the bonded and loose-fill products before installation
PN T90335-1992 Local quad unit type filled cables with polyethylene insulation and moisture barrier polyethylene sheath. General requirements and tests
PN-EN 16809-2-2017-02/Ap1-2021-08 E Thermal insulation products of buildings -- In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads -- Part 2: Specification for the bonded and loose-fill products after installation

AENOR, polyethylene glycol filling

UNE 84138:2013 Cosmetic raw materials. Polyethylenglycol-40.
UNE 84136:2013 Cosmetic raw materials. Polyethylenglycol-8 stearate.
UNE 84139:2013 Cosmetic raw materials. Polyethylenglycol-100 stearate.
UNE 84092:1997 COSMETIC RAW MATERIALS. POLYETHYLENGLYCOL-20 STEARATE.
UNE 55717:1984 SURFACE ACTIVE AGENTS. POLYGLYCOLS. DETERMINATION OF HYDROXYL NUMBER. PHTHALIC ANHYDRIDE ESTERIFICATION METHOD
UNE-EN 15348:2015 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates

Professional Standard - Textile, polyethylene glycol filling

FZ/T 52034-2014 Polyethylene/polyethylene terephthalate (PE/PET) bicomponent composite staple fiber
FZ/T 52034-2013 Polyethylene/polyethylene terephthalate (PE/PET) composite staple fiber
FZ/T 54041-2011 Polytrimethylene terephthalate/Polydimethylene terephthalate (PTT/PET)co-elastic yarns
FZ/T 54094-2017 Polytrimethylene terephthalate/polyethylene terephthalate (PTT/PET) composite drawn yarn
FZ/T 54142-2023 Polybuthylene terephthalate/polydimethylene terephthalate(PBT/PET) composite drawn textured yarns
FZ/T 54083-2015 Polyvinyl chloride/polyethylene terephthalate (PVC/PET) coated yarn
FZ/T 54141-2023 Polytrimethylene terephthalate/Polydimethylene terephthalate (PTT/PET) composite partially oriented yarns
FZ/T 52047-2016 Polyethylene/polyethylene terephthalate (PE/PET) whitening composite staple fiber
FZ/T 52047-2017 Polyethylene/polyethylene terephthalate (PE/PET) whitening composite staple fiber
FZ/T 51021-2021 Fiber grade polyethylene terephthalate (PET) foam
FZ/T 14033-2016 Printed and dyed blended fabric of polytrimethylene terephthalate/polyethylene glycol terephthalate (PTT/PET) composite fiber and cotton
FZ/T 12053-2016 Polytrimethylene terephthalate/Polydimethylene terephthalate(PTT/PET)composited fiber and cotton blended grey yarn
FZ/T 13032-2016 Polytrimethylene terephthalate/Polydimethylene terephthalate (PTT/PET) composite fiber blended and interweaved with cotton yarn grey fabric
FZ/T 51022-2022 Fiber grade antimony-free polyethylene terephthalate (PET) chips
FZ/T 50057-2022 Determination of total antimony content in polyethylene terephthalate (PET) fibers

U.S. Military Regulations and Norms, polyethylene glycol filling

ARMY MIL-L-47088 REINST NOTICE 3-2008 LAMINATE, ALUMINUM FOIL-POLYETHYLENE TEREPHTHALATE
ARMY MIL-L-47088 VALID NOTICE 1-1990 LAMINATE, ALUMINUM FOIL - POLYETHYLENE TEREPHTHALATE
ARMY MIL-L-47088-1974 LAMINATE, ALUMINUM FOIL - POLYETHYLENE TEREPHTHALATE
ARMY MIL-L-47088 VALID NOTICE 4-2013 LAMINATE, ALUMINUM FOIL-POLYETHYLENE TEREPHTHALATE
ARMY MIL-F-47076 A-1990 FILM, POLYETHYLENE TEREPHTHALATE, METALLIZED
ARMY MIL-F-47299 A VALID NOTICE 1-1986 FAIRING, FRANGIBLE, AIRBORNE ROCKET LAUNCHER FOR 2.75 INCH ROCKET SYSTEM

Yunnan Provincial Standard of the People's Republic of China, polyethylene glycol filling

DB53/T 689-2015 Polyethylene terephthalate (PET) preform

Professional Standard - Machinery, polyethylene glycol filling

JB/T 7898-1999 Filled polytetrafluoroethylene slideway soft strips
JB/T 7898-2013 Filled polytetrafluoroethylene slideway soft strips
JB/T 7899-1999 Techique specification of filled polytetrafluoroethylene slideway soft strips
JB/T 7899-2013 Filled polytetrafluoroethylene soft strips slideway.General requirements
JB/T 8873-1999 Teflon and teflon blank filler intended to be used in mechanical sealing. Technical specification
JB/T 8873-2011 Specification of filling-PTFE and PTFE blank for mechanical seal
JB/T 6069-1992 Filled polytetrafluoroethylene soft strip for water gate rubber composite seal cladding
JB/T 6069-2013 Filled polytetrafluoroethylene soft strips for rubber plastic composite seal of sluice gate

International Federation of Trucks and Engines, polyethylene glycol filling

NAVISTAR TMS 7039-2005 Polyethylene, Unfilled, Molded (Revision F)

机械工业部, polyethylene glycol filling

JB/T 7898-1995 Filled PTFE guide rail tape
JB/T 7899-1995 Filled PTFE soft tape guide rail technical conditions

Society of Automotive Engineers (SAE), polyethylene glycol filling

SAE AMS3025B-2000 Polyalkalene Glycol Heat Treat Quenchant
SAE AMS3025C-2009 Polyalkalene Glycol Heat Treat Quenchant
SAE AMS3678-1999 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components
SAE AMS3140-1994 COATING, URETHANE, ALIPHATIC ISOCYANATE Polytetrafluoroethylene Filled
SAE AMS3678/3A-2010 Type 3, 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/12-2010 Type 12, 10% Mineral, 2.5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/3-1999 Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/3-2006 Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3140-1982 Coating, Urethane, Aliphatic Isocyanate, Polytetrafluoroethylene Filled
SAE AMS3644/2-1979 PLASTIC ROD AND BAR, POLYIMIDE Graphite/PTFE Filled, Molded 15/10
SAE AMS-DTL-23053/7A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked
SAE AS23053/7-2022 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE POLYETHYLENE TEREPHTHALATE, NON-CROSSLINKED
SAE AMS-DTL-23053/7B-2018 Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked
SAE AMS3756C-2011 Moldings, Glass Fiber Filled Polytetrafluoroethylene, 75% PTFE Resin, 25 Glass, As Sintered
SAE AMS3140B-2013 Coating, Urethane, Aliphatic Isocyanate, Polytetrafluoroethylene Filled
SAE AMS3678/13-2010 Type 13 10% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/16-2010 Type 16, 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/15-2010 Type 15, 15% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3670/3A-1994 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 12 Graphite - 3 Polytetrafluoroethylene Filled
SAE AMS3670/2-1981 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 20 Graphite - 3 Polytetrafluoroethylene Filled
SAE AMS3670/3-1981 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 12 Graphite - 3 Polytetrafluoroethylene Filled
SAE AMS3678/14-2010 Type 14, 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/2-1999 Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/6-1999 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/2-2006 Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3571C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled
SAE AMS3670/3B-2004 Polyamide-Imide Bar, Rod, and Shapes, 12% Graphite - 3% Polytetrafluoroethylene Filled
SAE AMS3670/2B-1992 Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
SAE AMS3670/3B-1995 Polyamide-Imide Bar, Rod, and Shapes 12% Graphite - 3% Polytetrafluoroethylene Filled
SAE AMS3670/2A-1985 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 20 Graphite - 3 Polytetrafluoroethylene (PTFE) Filled
SAE AMS3756B-2008 Moldings, Glass Fiber Filled Polytetrafluoroethylene, 75% PTFE Resin, 25 Glass, As Sintered
SAE AMS3678/6-2006 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/11-2010 Type 11, 10% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AS81822/1-2004 WIRE, ELECTRICAL, SOLDERLESS WRAP, POLYETHYLENE TEREPHTHALATE-POLYESTER LAMINATED TAPE INSULATION, SILVER COATED SOLID CONDUCTOR
SAE AMS3678/4A-2010 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/6A-2010 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/2A-2010 Type 2, 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/4-1999 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/4-2006 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3591B-1993 POLYETHYLENE TEREPHTHALATE PLASTIC TUBING, ELECTRICAL INSULATION Thermally Welded, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3591A-1988 PLASTIC TUBING, ELECTRICAL INSULATION, THERMALLY WELDED Polyethylene Terephthalate, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3591-1995 PLASTIC TUBING, ELECTRICAL INSULATION, THERMALLY WELDED Polyethylene Terephthalate, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3571/2C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, Durometer A

CZ-CSN, polyethylene glycol filling

CSN 34 7735 Z1-1997

Cooling Technology Institute, polyethylene glycol filling

CTI STD-136-2000 Polyvinyl Chloride and Chlorinated Polyvinyl Chloride Materials Used for Film Fill, Splash Fill, Louvers and Drift Eliminators

SAE - SAE International, polyethylene glycol filling

SAE AMS3678C-2010 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled
SAE AMS3678D-2016 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled
SAE AMS3678A-2004 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled Components
SAE AMS3678/3B-2016 Type 3 15% Glass@ 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3140A-2007 Coating@ Urethane@ Aliphatic Isocyanate Polytetrafluoroethylene Filled
SAE AMS3678/12A-2016 Type 12 10% Mineral@ 2.5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3644/2A-1987 PLASTIC ROD AND BAR@ POLYIMIDE Graphite/PTFE Filled@ Molded 15/10
SAE AMS3644/2B-1992 PLASTIC ROD AND BAR@ POLYIMIDE Graphite/PTFE Filled@ Molded 15/10
SAE AS23053/7-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE POLYETHYLENE TEREPHTHALATE@ NON-CROSSLINKED
SAE AMS3678/13A-2016 Type 13 10% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/16A-2016 Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/6B-2016 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/11A-2016 Type 11 10% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/15A-2016 Type 15 15% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/2B-2016 Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/14A-2016 Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/4B-2016 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3591C-1995 POLYETHYLENE TEREPHTHALATE PLASTIC TUBING@ ELECTRICAL INSULATION - THERMALLY WELDED@ HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO
SAE AMS3136F-2016 Coating Material@ Phenolic Resin@ PTFE Filled Pigmented@ 150 °C (302 °F) Cure

SE-SIS, polyethylene glycol filling

SIS SS 424 18 55-1991 Optical cables — PE-sheathed, fully filled multifibre cables with loose secondary coating andPVC-sheath, type GNLKDV
SIS SS 424 18 31-1991 Optical cables — PVC-sheathed multifibre cables with light secondary coating, type GNHKD
SIS SS 424 18 32-1991 Optical cables — PVC-sheathed multifibre cables with loose secondary coating, type GNHKD
SIS SS 424 18 50-1991 Optical cables — PE-sheathed, fully filledmultifibre cables with tight secondary coating, type GNLDV
SIS SS 424 18 51-1991 Optical cables — PE-sheathed, fully filledmultifibre cables with loose secondary coating, type GNLDV

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, polyethylene glycol filling

GB 17931-2003 Poly(ethylene terephthalate)(PET)resin for bottles
GB/T 28596-2012 Internal carbon coated polyethylene terephthalate(PET)bottle
GB 22114-2008 Humectants for toothpastes.Glycerin and macrogol
GB/T 17830-1999 Determination of polyethylene glycol in polyethoxylated nonionic surfactants by HPLC
GB/T 41791-2022 Plastics—Film and sheeting—Non-oriented poly(ethylene terephthalate) (PET) sheets
GB 13114-1991 Hygienic standard for polyethylene terephthalate resin used as food contailners and packaging materials
GB/T 28609-2012 Optical functional films.Polyethylene terephthalate(PET).Determination of birefringence
GB 13113-1991 Hygienic standard for polyethylene terephthalate products used as food containers and packaging materials
GB/T 25255-2010 Optical functional.Polyethylene terephthalate(PET) film.Determination of tensile properties

中华人民共和国国家质量监督检验检疫总局, polyethylene glycol filling

GB/T 17931-2003 Poly(ethylene terephthalate)(PET)resin for bottles

Henan Provincial Standard of the People's Republic of China, polyethylene glycol filling

DB41/T 1573-2018 Polyethylene terephthalate (PET) edible oil pot

Professional Standard-Packaging, polyethylene glycol filling

BB/T 0060-2012 Packaging Container Polyethylene Terephthalate (PET)
BB/T 0081-2019 Folding polyethylene terephthalate (PET) box
BB/T 0082-2019 Packaging material Coated antistatic polyethylene terephthalate (PET) sheet (coil)

GM Global, polyethylene glycol filling

GMW 15582-2013 Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Filled Issue 2; English

Jilin Provincial Standard of the People's Republic of China, polyethylene glycol filling

DB22/T 1595-2012 Inorganic powder highly filled polyethylene writing paper
DB22/T 1594-2012 Technical specification for inorganic powder highly filled polyethylene degradable packaging film
DB22/T 1593-2012 Technical specifications for non-food inorganic powder highly filled polyethylene degradable shopping bags

GM Europe, polyethylene glycol filling

GME QK 000611-1985 PBTP mit mineralischen F黮lstoffen PBTP with Mineralic Filler German
GME QK 001911-2008 Blend von Polybutylen Terephthalat Neuware mit einem Recyclatanteil Polyethylen Terephthalat Blend from Virgin Polybutylene Terephthalate with Recyclate from Polyethylene Terephthalate English/German
GME QK 001912-2008 Blend von Polybutylen Terephthalat Neuware mit einem Recyclatanteil Polyethylen Terephthalat Blend from virgin Polybutylene Terephthalate with Recyclate from Polyethylene Terephthalate English/German
GME QK 000652-2004 Blend from PBT and PET with Glass Fibres (English/German)
GME QK 001910-2004 Blend aus PBT und PET mit Glasfasern Blend from PBT and PET with Glass Fibres English/German
GME QK 000648-2004 Thermoplastisches Polyester-Elastomer Polyethyleneterephthalate with Glass Fibres
GME QK 000705-2007 Polyethylene Terephthalate with Glass Fibres (English/German)
GME QK 000723-2010
GME QK 000711-2008 Blend aus PBT und PET Blend of PBT and PET English/German
GME QK 000713-2008 Blend of PBT and PET (English/German)
GME QK 000628-2007
GME QK 000708-2007 Polyethylene Terephthalate with Glass Fibres; Flame Retardant (English/German)
GME QK 000647-2003 Polyethyleneterephthalate with Glass Fibres (English/German)
GME QK 001875-2007 Polyethylenterephthalat mit Glasfasern Polyethyleneterephthalate with Glass Fibres English/German
GME QK 001909-2010 Polyethylene Terephthalate with Glass Fibres (English/German; Issue 4)
GME QK 001913-2008 Blend von Polybutylen Terephthalat Neuware mit einem Rezyklatanteil Polyethylenterephthalat Blend from virgin Polybutylene Terephthalate with Post Consumer Polyeythylene Terephthalate English/German
GME QK 000521-1983 Polyethylenterephthalat (PETP )mit 30 Massenanteil in % Glasfasern Polyethylene Terephthalate (PETP) with 30 % by Mass Glass Fibre German
GME QK 000714-2010
GME QK 000717-2010
GME QK 000657-2010
GME QK 000401-2002 Rigid PVC+ABS-Blend with Mineral Fillers (English/German)
GME QK 000403-2003 Rigid PVC+ABS-Blend with Mineral Fillers (English/German)

IECQ - IEC: Quality Assessment System for Electronic Components, polyethylene glycol filling

QC 300401/ HU 0001-1982 Metallized Polyethylene-Terephthalate Capacitors
QC 300401/ CS 0001-1991 Fixed Metallized Polyethylene-Terephthalate Film Dielectric d.c. Capacitors

Shanghai Provincial Standard of the People's Republic of China, polyethylene glycol filling

DB31/T 1399-2023 Polyethylene Terephthalate (PET) Bottle Recycling Procedures

国家市场监督管理总局、中国国家标准化管理委员会, polyethylene glycol filling

GB/T 22114-2021 Humectants for toothpastes—Glycerin and polyethylene glycol
GB/T 41167-2021 General requirements for polyethylene terephthalate (PET) bottle for drinks
GB/T 40006.9-2021 Plastics—Recycled plastics—Part 9:Poly(ethylene terephthalate) (PET) materials
GB/T 37193-2018 Optical functional films—Polyethylene terephthalate（PET) film—Determination of extraction rate

TH-TISI, polyethylene glycol filling

TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)

German Institute for Standardization, polyethylene glycol filling

DIN 53728-3:1985 Testing of plastics; determination of the viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution
DIN 16809:1980 Hollow rods of circular cross-section of polyester (PETP and PBTP); dimensions
DIN EN 15348:2022 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates; German and English version prEN 15348:2022
DIN EN 15348:2022-04 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates; German and English version prEN 15348:2022 / Note: Date of issue 2022-02-25*Intended as replacement for DIN EN 15348 (2015-01).
DIN EN 15348:2015-01 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates; German version EN 15348:2014 / Note: To be replaced by DIN EN 15348 (2022-04).
DIN EN 16809-2:2017-04 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation; German version ...
DIN EN 16809-1:2020-02 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation; German version...

ES-UNE, polyethylene glycol filling

UNE 84092:2018 Cosmetic raw materials. Polyethylenglycol-20 stearate
UNE 53975:2023 Plastics. Polyethylene (PE), Polypropylene (PP) and Poly(ethylene terephthalate) (PET) containers. Environmental stress-crack resistance in active environment.
UNE-EN 16809-1:2020 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation

RU-GOST R, polyethylene glycol filling

GOST 24947-1981 Polyvinylchloride. Method for determination of the content of substances extracted with methanol or ethyl ether
GOST 32686-2014 Bottles from polyethylene terephthalate for food liquids. General specifications
GOST 33221-2015 Bottles from polyethylene terephthalate for chemical products. General specifications

Military Standards (MIL-STD), polyethylene glycol filling

DOD A-A-51872-1987 SUTURE, ABSORBABLE, SURGICAL, (POLYGLYCOLIC ACID)
DOD A-A-50907-1985 PLASTIC STRIP, DENTAL MATRIX (POLYETHYLENE TEREPHTHALATE, CLEAR, 45 FEET)

International Organization for Standardization (ISO), polyethylene glycol filling

ISO 6188:1980 Plastics — Poly(ethylene terephthalate) granules — Determination of water content
ISO 6796:1981 Polyglycols for industrial use; Determination of hydroxyl number; Phthalic anhydride esterification method
ISO 1228:1975 Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number

Japanese Industrial Standards Committee (JISC), polyethylene glycol filling

JIS Z 1715:2009 Biaxially oriented polyethylene terephthalate (PET) films for packaging
JIS C 2318:2007 Balanced biaxially oriented polyethylene terephthalate films used for electrical purposes
JIS K 7390:2003 Testing methods for reclaimed poly(ethylene terephthalate) (PET) moulding materials from PET bottle

US-CFR-file, polyethylene glycol filling

CFR 40-721.10690-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10690:Benzenedicarboxylic acid, polymer with substituted alkanediol, dodecanedioic acid, 1,2-ethanediol, alkanedioic acid, alkanediol,.alpha.-hydro-.omega.-hydroxyp

National Health Commission of the People's Republic of China, polyethylene glycol filling

GB 1886.302-2021 National Food Safety Standard Food Additive Polyethylene Glycol

Korean Agency for Technology and Standards (KATS), polyethylene glycol filling

KS M ISO 6796:2007 Polyglycols for industrial use-Determination of hydroxyl number-Phthalic anhydride esterification method
KS M ISO 6796-2017(2022) Polyglycols for industrial use — Determination of hydroxyl number — Phthalic anhydride esterification method
KS M ISO 13636-2014(2019) Plastics — Film and sheeting — Non-oriented poly(ethylene terephathalate)(PET) sheets
KS M ISO 6796:2017 Polyglycols for industrial use — Determination of hydroxyl number — Phthalic anhydride esterification method
KS M ISO 13636:2014 Plastics — Film and sheeting — Non-oriented poly(ethylene terephathalate)(PET) sheets
KS M ISO 15988:2017 Plastics - Film and sheeting - Biaxially oriented poly(ethyleneterephthalate) (PET) films

BE-NBN, polyethylene glycol filling

NBN T 04-151-1983 Pclyglycols for industrial use - Determination of hydroxy1 number-Phthalic anhydride esterification method

European Committee for Standardization (CEN), polyethylene glycol filling

EN 16593:2014 Packaging - Rigid plastic containers - PET finish BVS 30H60
EN 16592:2014 Packaging - Rigid plastic containers - PET finish 29/25 (12@6)
EN 16594:2014 Packaging - Rigid plastic containers - PET finish 26/22 (12@0)
EN 15348:2014 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates

Indonesia Standards, polyethylene glycol filling

SNI 04-2070-1990 Polyethylene insulated and sheathed, petrojelly filled, unshielding ground telephone cables

American National Standards Institute （ANSI), polyethylene glycol filling

ANSI/ICEA S-99-689-2012 ICEA Standard for Broadband TP Filled, PE, Cu
ANSI/ASTM D4745:2001 New Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.03)

Association Francaise de Normalisation, polyethylene glycol filling

NF T20-667:1984 Polyglycols for industrial use. Determination of hydroxyl number. Phthalic anhydride esterification method.
NF EN 15348:2014 Plastiques - Plastiques recyclés - Caractérisation des recyclats de poly(éthylène téréphtalate) (PET)
NF T51-144:1974 Filled polyamides. Determination of percentages of molybdene bisulfide and fiber glass.
NF P62-306*NF EN 13413:2002 Resilient floor coverings - Polyvinyl chloride floor coverings on filled fibrous backing - Specification
NF P75-480-2*NF EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2 : specification for the bonded and loose-fill products after installation

Lithuanian Standards Office , polyethylene glycol filling

LST EN 15348-2008 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
LST EN 130100-2001 Sectional specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current

KR-KS, polyethylene glycol filling

KS M ISO 15988-2017 Plastics - Film and sheeting - Biaxially oriented poly(ethyleneterephthalate) (PET) films

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, polyethylene glycol filling

GB/T 17830-2017 Determination of polyethylene glycol content in nonionic ethoxylated surfactants—HPLC method
GB/T 33399-2016 Optical functional films—Polyethylene terephthalate(PET) film—Determination of thickness
GB/T 35859-2018 Determination of ethylene glycol monoethyl ether insoluble contents in polymer materials for offset printing plates—Filtering method
GB/T 35173-2017 Characterisation and testing methods of recycled poly (ethylene terephthalate)(PET)
GB/T 33398-2016 Optical functional films—Polyethylene terephthalate(PET) film—Determination of surface resistance

British Standards Institution (BSI), polyethylene glycol filling

BS 6564-3:1990 Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene
22/30448006 DC BS EN 15348. Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
BS EN 16809-1:2019 Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Specification for the bonded and loose-fill products before installation

GOSTR, polyethylene glycol filling

GOST R 57057-2016 Resources saving. Waste treatment. Characteristics of poly (ethylene terephthalate) (PET) recyclates

Professional Standard - Commodity Inspection, polyethylene glycol filling

SN/T 3913-2014 Determination of terephthalic acid and ethylene glycol in polyethylene terephthalate ester (PET) and polyethylene terephthalate products.Gas chromatography-mass spectrometry(GC-MS) method
SN/T 1880.2-2007 Hygienic specifications of export and import food packaging Part 2: Polyethylene terephthalate packaging

Malaysia Standards, polyethylene glycol filling

MS 1468-1999 Method of test for determining the 24-hour gas (air) space acetaldehyde content of freshly blown polyethylene terephthalate (pet) bottles

Professional Standard - Electron, polyethylene glycol filling

SJ/Z 9191-1995 Specifications for determination of metal foil bis2hydroxyethyl terephthalate film dielectric DC fixed capacitors used for VCR

国家能源局, polyethylene glycol filling

SH/T 1817-2017 Determination of residual acetaldehyde content in polyethylene terephthalate (PET) resin for plastic bottles by headspace gas chromatography

Danish Standards Foundation, polyethylene glycol filling

DS/EN 130100:2000 Sectional Specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current

CENELEC - European Committee for Electrotechnical Standardization, polyethylene glycol filling

EN 130100:1997 Sectional Specification: Fixed Polyethylene-Terephtalate Film Dielectric Metal Foil Capacitors for Direct Current

CEN - European Committee for Standardization, polyethylene glycol filling

PREN 16809-1-2018 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation