ZH
RU
ES

d+ with +g+

d+ with +g+, Total:154 items.

In the international standard classification, d+ with +g+ involves: Components for aerospace construction, Aircraft and space vehicles in general, Shipbuilding and marine structures in general, Resistors, Lamps and related equipment, Flexible drives and transmissions, Testing of metals, Cutting tools, Iron and steel products, Materials for aerospace construction, Machine tool systems, Structures of buildings, Rotating machinery, Electrical equipment for working in special conditions, Clothes, Ground service and maintenance equipment, Springs, Fasteners for aerospace construction, Fasteners, Rubber and plastics products, Bottles. Pots. Jars, Interface and interconnection equipment, Telecommunication systems, Machine tools.

Defense Logistics Agency, d+ with +g+

DLA A-A-59568-2001 GAGES, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE [Superseded: DLA GG-G-91 D CANC NOTICE 2, DLA GG-G-91 D VALID NOTICE 1, DLA GG-G-91 D, DLA GG-G-91 C, DLA GG-G-91 B INT AMD 2, DLA GG-G-91 B]
DLA A-A-59330 VALID NOTICE 1-2005 GRINDING MACHINE, SURFACE, RECIPROCATING-TABLE, HORIZONTAL-SPINDLE, POWER-FEED [Superseded: DLA MIL-G-80088 D CANC NOTICE 1, DLA MIL-G-80088 D (1), DLA MIL-G-80088 D, DLA MIL-G-80088 C, DLA MIL-G-80088 B, DLA MIL-G-80088 A, DLA MIL-G-80088]
DLA A-A-59330-1998 GRINDING MACHINE, SURFACE, RECIPROCATING-TABLE, HORIZONTAL-SPINDLE, POWER-FEED [Superseded: DLA MIL-G-80088 D CANC NOTICE 1, DLA MIL-G-80088 D (1), DLA MIL-G-80088 D, DLA MIL-G-80088 C, DLA MIL-G-80088 B, DLA MIL-G-80088 A, DLA MIL-G-80088]
DLA A-A-59345-2000 GRINDING MACHINE, CYLINDRICAL, EXTERNAL, PLAIN [Superseded: DLA MIL-G-23368 D CANC NOTICE 1, DLA MIL-G-23368 D, DLA MIL-G-23368 C, DLA MIL-G-23368 B (1), DLA MIL-G-23368 B, DLA MIL-G-23368 A]
DLA A-A-59351 VALID NOTICE 1-2005 GRINDING MACHINE, DRILL [Superseded: DLA MIL-G-45072 G CANC NOTICE 1, DLA MIL-G-45072 G, DLA MIL-G-45072 F (1), DLA MIL-G-45072 F, DLA MIL-G-45072 E, DLA MIL-G-45072 D, DLA MIL-G-45072 C (1), DLA MIL-G-45072 C]
DLA A-A-59351-1999 GRINDING MACHINE, DRILL [Superseded: DLA MIL-G-45072 G CANC NOTICE 1, DLA MIL-G-45072 G, DLA MIL-G-45072 F (1), DLA MIL-G-45072 F, DLA MIL-G-45072 E, DLA MIL-G-45072 D, DLA MIL-G-45072 C (1), DLA MIL-G-45072 C]
DLA A-A-59266 VALID NOTICE 1-2005 GRINDING MACHINE, UNIVERSAL, CYLINDRICAL, EXTERNAL, CENTER-TYPE [Superseded: DLA MIL-G-23823 E CANC NOTICE 1, DLA MIL-G-23823 E, DLA MIL-G-23823 D, DLA MIL-G-23823 C, DLA MIL-G-23823 B, DLA MIL-G-23823 A, DLA MIL-G-23823]
DLA A-A-59266-1998 GRINDING MACHINE, UNIVERSAL, CYLINDRICAL, EXTERNAL, CENTER-TYPE [Superseded: DLA MIL-G-23823 E CANC NOTICE 1, DLA MIL-G-23823 E, DLA MIL-G-23823 D, DLA MIL-G-23823 C, DLA MIL-G-23823 B, DLA MIL-G-23823 A, DLA MIL-G-23823]
DLA MIL-PRF-19500/614 H-2013 SEMICONDUCTOR DEVICE, FIELD EFFECT RADIATION HARDENED TRANSISTORS, N-CHANNEL, SILICON, TYPES 2N7380 AND 2N7381, JANTXV, M, D, R, F, G, AND H AND JANS, M, D, R, F, G, AND H
DLA A-A-59461-2000 GRINDING AND SANDING MACHINE, PLATEN, ABRASIVE BELT, WET AND DRY [Superseded: DLA MIL-G-80176 B CANC NOTICE 2, DLA MIL-G-80176 B VALID NOTICE 1, DLA MIL-G-80176 B (1), DLA MIL-G-80176 B, DLA MIL-G-80176 A, DLA MIL-G-80176]
DLA A-A-59591-2000 CLOTH, BUNTING, COTTON, MERCERIZED [Superseded: DLA CCC-C-439 G CANC NOTICE 1, DLA CCC-C-439 G, DLA CCC-C-439 F VALID NOTICE 1, DLA CCC-C-439 F, DLA CCC-C-439 E, DLA CCC-C-439 D (2), DLA CCC-C-439 D]
DLA MIL-PRF-19500/614 G-2012 SEMICONDUCTOR DEVICE, FIELD EFFECT RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS) TRANSISTORS, N-CHANNEL, SILICON, TYPES 2N7380 AND 2N7381, JANTXV, M, D, R, F, G, AND H AND JANS, M, D, R, F, G, AND H
DLA A-A-55297-1999 SHIRT, MAN'S (POLYESTER/COTTON, TROPICAL, SHORT SLEEVE) [Superseded: DLA MIL-S-17618 H CANC NOTICE 1, DLA MIL-S-17618 H, DLA MIL-S-17618 G (1), DLA MIL-S-17618 G, DLA MIL-S-17618 F (1), DLA MIL-S-17618 F, DLA MIL-S-17618 D (2), DLA MIL-S-17618 E
DLA MS51485 NOTICE 2-1999 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
DLA MS51485 VALID NOTICE 1-1996 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
DLA MS51485-1984 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
DLA MIL-PRF-19500/613 D-2011 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER, TYPE 2N7373, JAN, JANTX, JANTXV, JANS AND JANSM, D, P, L, R, F, G, AND H
DLA MIL-PRF-19500/613 E-2013 SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER, TYPE 2N7373, JAN, JANTX, JANTXV, JANS AND JANSM, D, P, L, R, F, G, AND H

International Telecommunication Union (ITU), d+ with +g+

ITU-T G.711.1 AMD 4-2010 (Pre-Published) Wideband embedded extension for G.711 PCM: New Annex D with superwideband extension Amendment 4
ITU-T G.729 ANNEX C+-2002 Coding of Speech at 8 kbit/s Using Conjugate-Structure Algebraic-Code-Excited Linear Prediction (CS-ACELP) Annex C+: Reference Floating-Point Implementation for Integrating G.729 CS-ACELP Speech Coding Main Body with Annexes B, D and E Study Group 16; CO
ITU-T G.711.1 AMD 3-2010 Wideband embedded extension for G.711 pulse code modulation Amendment 3: Lossless compression of G.711 bitstreams in G.711.1 Study Group 16
ITU-T G.711.1 AMD 5-2011 Wideband embedded extension for G.711 pulse code modulation Amendment 5: New Appendix IV extending Annex D superwideband for mid-side stereo Study Group 16
ITU-T G.729.1 AMD 5-2008 G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729 Amendment 5: New Annex D (Reference floating-point implementation for G.729.1 Annex C DTX/CNG) and corrections to the main body and Ann
ITU-R BS.707-5-2005 Transmission of multisound in terrestrial television systems PAL B B1 D1 G H and I and SECAM D K K1 and L
ITU-T G.711.1 AMD 1-2014 Wideband embedded extension for ITU-T G.711 pulse code modulation - Amendment 1: New Annex G - An alternative implementation of stereo superwideband extension using floating-point
ITU-T G.711.1-2012 Wideband embedded extension for ITU-T G.711 pulse code modulation (Study Group 16)

U.S. Military Regulations and Norms, d+ with +g+

ARMY MIL-DTL-11589/495 VALID NOTICE 3-2013 Ribbon, Eugene G. Fubini Award
ARMY MIL-PRF-23359 H-1997 DETECTOR, MINE, METALLIC, PORTABLE [Use In Lieu Of: ARMY MIL-D-0023359 G NOTICE 1]

United States Navy, d+ with +g+

NAVY MIL-D-3134 J (1)-1989 DECK COVERING MATERIALS [Use In Lieu Of: NAVY MIL-D-003134 G]
NAVY A-A-59244-1998 DRILL, PNEUMATIC DRIFTER, SELF-PROPELLED, CRAWLER MOUNTED (TRACK DRILL) [Superseded: NAVY OO-D-2776 CANC NOTICE 1, NAVY OO-D-2776]

HU-MSZT, d+ with +g+

Japanese Industrial Standards Committee (JISC), d+ with +g+

JIS C 6408:1994 Fixed carbon film resistors for use in electronic equipment (characteristic D and G)
JIS C 5212:1995 Fixed carbon film chip resistors cylindrical type for use in electronic equipment (form 27, characteristic D and G, grade C)

AIA/NAS - Aerospace Industries Association of America Inc., d+ with +g+

NASM24634-2012 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G AND T@ APPROXIMATE HOLE SIZES FOR (Rev 1)
NASM24630-2012 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ PAN HEAD@ CRUCIFORM RECESSED@ CRES (Rev 1)
NASM24630-2018 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ PAN HEAD@ CRUCIFORM RECESSED@ CRES (Rev 2)
NASM24630-1998 Screw@ Tapping-Thread Cutting@ Types D@F@G or T@ Pan Head@ Cross Recessed@ Corrosion Resisting Steel
NASM24634-1998 Screw@ Tapping@ Thread Cutting-Types D@F@G and T@ Approximate Hole Sizes for
NASM24629-1998 Screw@ Tapping-Thread Cutting@ Types D@F@G@ or T@ Pan Head@ Cross Recessed@ Steel@ Carbon Cadmium Plated
NASM24627-1998 Screw@ Tapping-Thread Cutting@ Type D@ F@ G@ or T@ Flat 82 Degree Countersunk Head@ Cross-Recessed@ Carbon Steel
NASM24628-2011 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ FLAT 82° COUNTERSUNK HEAD@ CRUCIFORM-RECESSED@ CRES (Rev 1)
NASM24628-1999 Screw@ Tapping - Thread Cutting@ Types D@ F@ G or T@ Flat 82 Degrees Countersunk Head@ Cross-Recessed@ Corrosion-Resisting Steel
NASM24627-2013 SCREW@ TAPPING@ THREAD CUTTING@ TYPES D@ F@ G OR T@ FLAT 82 degrees COUNTERSUNK HEAD@ CRUCIFORM RECESS@ CARBON STEEL (Rev 1)

German Institute for Standardization, d+ with +g+

DIN 49848-3:2002-12 Bicycle incandescent lamps - Part 3: Categories C, D, E, F and G
DIN 49848-3:2002 Bicycle incandescent lamps - Part 3: Categories C, D, E, F and G
DIN 69881-5:1989-04 Tool holder with prism; form D with cylindrical seat
DIN 6331:2003-04 Hexagon collar nuts with a height of 1,5 d
DIN 95366:1996 Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G
DIN 86025-2:1997 Fastening clamps with bracket - Part 2: Type C without insert, type D with insert
DIN 41682:1955 Electric communication engineering; miniature fuses, g-series (G) fuse holders, 6 A, 60 V, for interchangeable g-series (G) fuse links with contact blades
DIN 6094-14:1995 Packaging - Finishes for bottles - Part 14: 8 G screw-thread for bottles with internal pressure
DIN 49339:1985 D-type fuse-bases D III 63 A up to 660 V, for back connection, with flange, for gauge rings
DIN 1415-6:1970 Broaching tools; rectangular shanks G with perpendicular driving plane (for internal splines)

PL-PKN, d+ with +g+

PN C94153-41-1990 Rubber vulcanized for technical articles Rubber vulcanized type D classe G
PN C94153-71-1990 Rubber vulcanized lor technical articles Rubber vulcanized typu G elass D
PN H04355-1991 Hardness Rockwell test for metals. Scales A,B,C,D,E,F,G,H,K,

Korean Agency for Technology and Standards (KATS), d+ with +g+

KS C 6370-1995(2000) FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )
KS C 6370-1990 FIXED CARBON FILM RESISTORS FOR ELECTRONICS EQUIPMENT ( D,G )
KS C 6054-2001 FIXED CARBON FILM CHIP CYLINDRICAL TYPE RESISTORS FOR USE IN ELECTRONIC EQUIPMENT (FORM 27, CHARACTERISTIC D AND G,GRADE C)

CH-SNV, d+ with +g+

GB-REG, d+ with +g+

REG 29 CFR PART 2510-2011 DEFINITIONS OF TERMS USED IN SUBCHAPTERS C, D, E, F, AND G OF THIS CHAPTER

国家市场监督管理总局、中国国家标准化管理委员会, d+ with +g+

GB/T 24619-2021 Synchronous belt drives—Curvilinear profile systems G、H、R and S belts and pulleys

Society of Motion Picture and Television Engineers (SMPTE), d+ with +g+

SMPTE 35M-1997 Television Analog Recording - 1/2-in Type G - Cassette and Tape
SMPTE ST 35M-1997 Television Analog Recording - 1/2-in Type G - Cassette and Tape
SMPTE 307M-2002 Television Digital Recording - 6.35-mm Type D-7 and Type D-12 Component Format - Tape Cassette
SMPTE ST 307M-2002 Television Digital Recording - 6.35-mm Type D-7 and Type D-12 Component Format - Tape Cassette

(U.S.) Parachute Industry Association, d+ with +g+

PIA PS22046C-2012 RING - PARACHUTE HARNESS "D" (MS22046)

Professional Standard - Aviation, d+ with +g+

HB 2071-1974 With internal calipers D>30~80mm
HB 2070-1974 With internal calipers D=8~30mm
HB 3495-1985 End face countersink drill with guide pillar d＝2.5~15mm
HB 3502-1985 Conical countersink drill with guide pillar d＝2.4~12.9mm
HB 2844-1976 Quick change bushing with locking pin slot d=12~24
HB 7328-1996 Interference thread with table comb calipers d=3~45
HB 2842-1976 Quick change chuck with elastic bushing d=1~14
HB 3530-1985 Straight shank machine reamer with edge inclination d＝6~20mm
HB 3532-1985 Shell machine reamer with edge inclination d＝30~80mm
HB 4202-1989 Handle for single head with conical tail measuring head (D=2.5~21mm)
HB 793-1989 Double head with conical tail measuring head with handle (d=2.5~21mm)
HB 793-1974 Double head with conical tail measuring head with handle (d=2.5~21mm)
HB 2305-1976 Straight shank machine reamer with blade inclination D=6~20mm
HB 2306-1976 Tapered shank machine reamer with blade inclination D=10~32mm
HB 2307-1976 Sleeve type machine reamer with blade inclination D=30~80mm
HB 3531-1985 Taper shank machine reamer with edge inclination d＝10~32mm
HB 2414-1977 HB 243-70 threaded comb gauge d=3~30mm
HB 717-1979 Taper shank profiling end mill with roller D=25~50mm

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, d+ with +g+

ITU-T X.832 FRENCH-1995 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - GENERIC UPPER LAYERS SECURITY: SECURITY EXCHANGE SERVICE ELEMENT (SESE) PROTOCOL SPECIFICATION
ITU-T X.831 FRENCH-1995 INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - GENERIC UPPER LAYERS SECURITY: SECURITY EXCHANGE SERVICE ELEMENT (SESE) SERVICE DEFINITION
ITU-T K.32 FRENCH-1995 IMMUNITY REQUIREMENTS AND TEST METHODS FOR ELECTROSTATIC DISCHARGE TO TELECOMMUNICATION EQUIPMENT - GENERIC EMC RECOMMENDATION

Aerospace Industries Association/ANSI Aerospace Standards, d+ with +g+

AIA/NAS NASM24634-1998 Screw, Tapping, Thread Cutting-Types D,F,G and T, Approximate Hole Sizes for
AIA/NAS NASM21051-2010 NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 Degrees F (Rev 3)
AIA/NAS NASM24629-1998 Screw, Tapping-Thread Cutting, Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated
AIA/NAS NASM24630-1998 Screw, Tapping-Thread Cutting, Types D,F,G or T, Pan Head, Cross Recessed, Corrosion Resisting Steel
AIA/NAS NASM22529-2011 GROMMET, EDGING Rev 1 [Superseded: DLA MIL-DTL-22529 D CANC NOTICE 2, DLA MIL-DTL-22529 D CANC NOTICE 1, DLA MIL-DTL-22529 D (2), DLA MIL-DTL-22529 D (1), DLA MIL-DTL-22529 D, DLA MIL-DTL-22529 C (1), DLA MIL-DTL-22529 C, DLA MIL-G-22529 B VALID
AIA/NAS NAS 693-1987 Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk [Use: AIA/NAS NAS 380, AIA/NAS NAS 380, DLA MS21066 REV G CANC NOTICE 1, DLA MS21066 REV G, DLA MS21066 REV F, DLA MS21066 REV E, DLA MS21066 REV D, DLA MS21067 REV G CANC NOTICE 1, DLA MS2
AIA/NAS NAS 694-1987 Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk [Use: AIA/NAS NAS 380, AIA/NAS NAS 380, DLA MS21066 REV G CANC NOTICE 1, DLA MS21066 REV G, DLA MS21066 REV F, DLA MS21066 REV E, DLA MS21066 REV D, DLA MS21067 REV G CANC NOTICE 1, DLA MS2
AIA/NAS NAS 695-1987 Nut Assembly, Self- Locking, Gang Channel- Low Height, Csk [Use: AIA/NAS NAS 380, AIA/NAS NAS 380, DLA MS21066 REV G CANC NOTICE 1, DLA MS21066 REV G, DLA MS21066 REV F, DLA MS21066 REV E, DLA MS21066 REV D, DLA MS21067 REV G CANC NOTICE 1, DLA MS2
AIA/NAS NASM24629-2011 SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G, OR T, PAN HEAD, CRUCIFORM RECESSED, CARBON STEEL, CADMIUM PLATED (Rev 1)
AIA/NAS NAS 685-1974 Nut, Self-Locking, Plate-Corner, Low Height, Csk Superseded - December 1974 (Rev. 11) [Use: DLA MS21057 REV G CANC NOTICE 1, DLA MS21057 REV G, DLA MS21057 REV F, DLA MS21057 REV E, DLA MS21057 REV D, DLA MS21057 REV C, DLA MS21058 REV D CANC NOT
AIA/NAS NASM16995-2010 SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT STEEL, UNC-3A Rev 1 [Superseded: DLA MS16995 REV H CANC NOTICE 1, DLA MS16995 REV H, DLA MS16995 REV G, DLA MS16995 REV F, DLA MS16995 REV E, DLA MS16995 REV D, DLA MS16995 REV C]
AIA/NAS NASM24627-1998 Screw, Tapping-Thread Cutting, Type D, F, G, or T, Flat 82 Degree Countersunk Head, Cross-Recessed, Carbon Steel
AIA/NAS NAS 682-1987 Nut, Self-Locking, Plate-One Lug, Low Height, C'Bore Superseded - November 1987 (Rev. 10) [Use: DLA MS21051 REV G CANC NOTICE 1, DLA MS21051 REV G (1), DLA MS21051 REV G, DLA MS21051 REV F, DLA MS21051 REV E, DLA MS21051 REV D, DLA MS21051 REV C,

GM North America, d+ with +g+

GM 9985292-2007 Adhesive, Tape, Strapping Revision D

Indonesia Standards, d+ with +g+

SNI 3567 AMD 1-2011 Cold rolled steel sheets and strips (Bj D)

U.S. Air Force, d+ with +g+

AIR FORCE MIL-B-5428 B NOTICE 2-1997 BELT, SAFETY, SHOULDER, HARNESS, TROOP, TYPE D-2
AIR FORCE MIL-B-5428 B-1982 BELT, SAFETY, SHOULDER, HARNESS, TROOP, TYPE D-2

SE-SIS, d+ with +g+

SIS SMS 2484-1967 V-betts. Section D. Power rating

Professional Standard - Petroleum, d+ with +g+

SY/T 6391-1999 SEG - D seismic tape format

Professional Standard - Aerospace, d+ with +g+

QJ 340-1978 Center hole with large protective cone (d=0.7~3)
QJ 391-1978 Taper Shank with Guided Flat Bottom Countersink (D=14~32)
QJ 390-1978 Straight shank with guide flat bottom countersink (D=4~20)
QJ 337-1978 Straight groove composite center drill with cone protection (d=2.5~6)
QJ 414-1978 Non-full shape smooth plug gauge with guard plate (D=180~360)
QJ 448-1978 Non-full type smooth plug gauge handle with handle (D=100～180)
QJ 336-1978 Compound center drill with protective cone and spiral groove (d=1~2)

British Standards Institution (BSI), d+ with +g+

BS ISO 10889-5:1997 Tool holders with cylindrical shank - Type D with more than one rectangular seat
BS ISO 10889-5:1998 Tool holders with cylindrical shank. Type D with more than one rectangular seat
BS ISO 13050:2014 Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
BS EN ISO 6508-1:1999 Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-1:2006 Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)

International Organization for Standardization (ISO), d+ with +g+

ISO 13050:2014 Synchronous belt drives - Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
ISO 6508:1986 Metallic materials; Hardness test; Rockwell test (scales A - B - C - D - E - F - G - H - K)
ISO 13050:2022 Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys

Aerospace Industries Association, d+ with +g+

AIA NASM24629-1998 Screw, Tapping-Thread Cutting, Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated FSC 5305
AIA NASM24630-1998 Screw, Tapping-Thread Cutting, Types D,F,G or T, Pan Head, Cross Recessed, Corrosion Resisting Steel FSC 5305
AIA NASM24634-1998 Screw, Tapping, Thread Cutting-Types D,F,G and T, Approximate Hole Sizes for FSC 5305
AIA NASM24627-1998 Screw, Tapping-Thread Cutting, Type D, F, G, or T, Flat 82 Degree Countersunk Head, Cross-Recessed, Carbon Steel FSC 5305

Association Francaise de Normalisation, d+ with +g+

NF L55-561:1956 Uv lamps with ba 15D/17 cap and G 6 bulb (rech.).
NF L55-551:1956 Lamps with ba 15D/19 cap and G 16 1/2 (rech.).

Group Standards of the People's Republic of China, d+ with +g+

T/ZS 0331-2022 Technical specification for application of T63/E/G high-strength ribbed bars

American Society of Mechanical Engineers (ASME), d+ with +g+

ASME N-652-1-2001 Alternative Requirements to Categories B-G-1, B-G-2, and C-D Bolting Examination Methods and Selection Criteria Section XI, Division 1; (SUPP 12)

National Metrological Verification Regulations of the People's Republic of China, d+ with +g+

JJG 112-2003 Verification Regulation of Metallic Rockwell Hardness Testers (scales A,B,C,D,E,F,G,H,K,N,T)
JJG 112-2013 Metallic Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T)
JJG 113-2003 Verification Regulation of Metallic Rockwell Hardness Reference Blocks (scales A,B,C,D,E,F,G,H,K,N,T)
JJG 113-2013 Metallic Rockwell Hardness Reference Blocks (Scales A, B, C, D, E, F, G, H, K, N, T)

American National Standards Institute （ANSI), d+ with +g+

ANSI/UL 674-2003 Electric Motors and Generators for Use in Hazardous Locations, Class I Groups C and D, Class II Groups E, F and G

RO-ASRO, d+ with +g+

STAS 7169/3-1988 VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES Scales A,B:C,D,E,F,G,H,K,L,M,R and S

YU-JUS, d+ with +g+

JUS Z.C1.688-1989 Hose caupling for fire fighting C—D-adapter
JUS Z.C1.674-1989 Hose coupling for fire fighting. Solid coupling D
JUS Z.C1.684-1989 Hose coupling for fire fighting. Blind coupling D

AT-ON, d+ with +g+

ONORM B 3020 Teil.5-1988 Planed timber proflies; tongued and grooved boards with wide groove effect (proflies E, F and G)
ONORM B 3020 Teil.10-1988 Planed timber proflies; tongued and grooved boards with round face (profll D)

Standard Association of Australia （SAA）, d+ with +g+

AS 1815.1:2007 Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)

Danish Standards Foundation, d+ with +g+

DS 751:1955 Fire proection. D-couplings for hoses
DS 759:1955 Fire protection. D-hose cap with metallic bearing surface

International Federation of Trucks and Engines, d+ with +g+

NAVISTAR TMS 4106-2000 Seat Belt Hardware - Corrosion Resistance (Revision D-1)

ES-AENOR, d+ with +g+

UNE 7-424 Pt.5-1988

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, d+ with +g+

ITU-R BS.707-5 FRENCH-2005 Transmission of multisound in terrestrial television systems PAL B@ B1 D1@ G@ H and I@ and SECAM D@ K@ K1 and L
ITU-R BS.707-4-1998 Transmission of Multisound in Terrestrial Television Systems Pal B@ D1@ G@ H and I@ and Secam D@ K@ K1@ and L

CZ-CSN, d+ with +g+

CSN ISO 6508:1993 Metallic materials. Hardness test. Rockwell test (Scales A-B-C-D-E-F-G-H-K)

NEMA - National Electrical Manufacturers Association, d+ with +g+

NEMA C78.20-2003 Electric Lamps - A@ G@ PS@ and Similar Shapes with E26 Medium Screw Bases
NEMA C78.22-1995 Incandescent Lamps - A@ G@ PS@ and Similar Shapes with E39 Mogul Screw Bases