ZH
RU
ES

Prepreg

Prepreg, Total:367 items.

In the international standard classification, Prepreg involves: Surface treatment and coating, Products of the textile industry, Vocabularies, Rubber and plastics products, Reinforced plastics, Materials for aerospace construction, Insulating materials, Printed circuits and boards, Materials for the reinforcement of composites, Manufacturing forming processes, Aircraft and space vehicles in general, Analytical chemistry, Plastics, Lubricants, industrial oils and related products.

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Prepreg

IPC MI-660 3.4-1984 Prepreg (No-Flow)
IPC TM-650 2.3.9-1997 Flammability of Prepreg and Thin Laminate Revision D
IPC TM-650 2.3.16-1994 Resin Content of Prepreg, by Burn-Off; Revision B - December 1994
IPC TM-650 2.3.19-1994 Volatile Content of Prepreg; Revision C - December 1994
IPC TM-650 2.3.16.1-1994 Resin Content of Prepreg, by Treated Weight; Revision C - December 1994
IPC TM-650 5.1.440-1975 Analysis of Pre-Preg Materials for Gel Time
IPC TM-650 2.3.4.2-1994 Chemical Resistance of Laminates, Prepreg, and Coated Foil Products, by Solvent Exposure; Revision A - December 1994
IPC TM-650 2.3.18-1986 Gel Time for Prepreg Materials; Revision A - April 1986

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Prepreg

GB/T 28461-2012 Carbon fiber prepreg
GB/T 25043-2010 Multiaxial warp-knitted reinforcement for resin-matrix prepreg
GB/T 32788.1-2016 Test method for properties of prepreg.Part 1:Determination of gel time
GB/T 32788.4-2016 Test method for properties of prepreg.Part 4:Determination of tensile strength
GB/T 32788.5-2016 Test method for properties of prepreg.Part 5:Determination of resin content
GB/T 36532-2018 Fibre-reinforced plastics.Thermosetting moulding compounds and prepregs.Determination of cure characteristics
GB/T 32788.2-2016 Test method for properties of prepreg.Part 2:Determination for resin flow of prepreg
GB/T 32788.3-2016 Test method for properties of prepreg.Part 3:Determination of volatile content
GB/T 27797.4-2013 Fibre-reinforced plastics.Methods of producing test plates.Part 4:Moulding of prepregs
GB/T 32788.6-2016 Test method for properties of prepreg.Part 6:Determination of mass per unit area
GB 10243-1988 prepreg for use as bonding sheet material in the fabrication of multilayer printed boards

IPC - Association Connecting Electronics Industries, Prepreg

IPC TM-650 2.3.19C-1994 Volatile Content of Prepreg
IPC TM-650 2.4.38A-1991 Prepreg Scaled Flow Testing
IPC TM-650 2.4.38-1984 Prepreg Scaled Flow Testing
IPC TM-650 5.1.442-1975 Analysis of Pre-Preg Materials for Volatile Content
IPC TM-650 2.3.17.2B-1997 "Resin Flow of ""No Flow"" Prepreg"
IPC TM-650 2.3.17.2A-1994 "Resin Flow of ""No Flow"" Prepreg"
IPC TM-650 2.3.17C-1994 Resin Flow Percent of Prepreg
IPC TM-650 2.3.17D-1997 Resin Flow Percent of Prepreg
IPC TM-650 2.3.9D-1997 Flammability of Prepreg and Thin Laminate
IPC TM-650 2.3.9C-1994 Flammability of Prepreg and Thin Laminate
IPC L-109B-1992 Specification for Resin Impregnated Fabric (Prepreg) for Multilayer Printed Boards
IPC TM-650 2.3.18A-1986 Gel Time for Prepreg Materials

RU-GOST R, Prepreg

GOST R 50443-1992 Prepregs and premixes. Terms and definitions
GOST R 56659-2015 Polymer composites. Prepregs. Method for determination of gel time of carbon fiber-epoxy prepreg
GOST R 56658-2015 Polymer composites. Prepregs. Method for determination of resin flow of carbon fiber-epoxy prepreg
GOST R 56796-2015 Polymer composites. Prepregs. Method for determination of constituent content of prepreg
GOST R 56789-2015 Polymer composites. Prepreg. Method for determination of volatiles content in prepreg
GOST 32654-2014 Polymer composites. Thermosetting prepregs and premixes. Determination of cure characteristics
GOST 32664-2014 Polymer composites. Prepregs and premixes. Determination of apparent volatile-matter content
GOST 32653-2014 Polymer composites. Determination of gel time of prepregs
GOST 33367-2015 Polymer composites. Production of plates by compression moulding of prepregs and premixes for preparation of test specimens
GOST 32649-2014 Polymer composites. Determination of mass per unit area of prepregs
GOST 32660-2014 Polymer composites. Prepregs. Determination of resin flow
GOST R 57755-2017 Polymer composites. Prepregs. Determination of the degree of fibre wetting
GOST R 56782-2015 Polymer composites. Prepregs. Determenation of constituent content of prepreg by Soxhlet extraction
GOST 32655-2014 Polymer composites. Thermosetting prepregs and premixes. Methods of determination flowability, maturation and shelf life
GOST 33348-2015 Polymer composites. Production of plates from prepregs for preparation of test specimens
GOST 32652-2014 Polymer composites. Prepregs, premixes and laminates. Determination of the fiberglass and mineral filler content. Calcination methods
GOST R 57914-2017 Polimer composites. Prepregs and premixes. Determination of resin, reinforcing filler and mineral filler content by dissolution methods

(U.S.) Ford Automotive Standards, Prepreg

FORD FLTM EU-BO 058-2-2001 DETERMINATION OF THE GRADE OF MATURATION OF PRE-PREGS
FORD FLTM EU-BO 058-02-2001 DETERMINATION OF THE GRADE OF MATURATION OF PRE-PREGS

Professional Standard - Aviation, Prepreg

HB 5392-1987 648/T300 epoxy carbon fiber prepreg
HB 7772-2005 Specification for epoxy resin carbon fiber prepregs
HB 7069-2007 Specification for epoxy glass fabric prepegs
HB 7069-1994 3242/823 flame retardant epoxy glass cloth prepreg
HB 6701-1993 LWR-1/T300 medium temperature curing epoxy carbon fiber prepreg
HB 7736.1-2004 Test method for physical properties of composite material prepreg Part 1:General rules
HB 7736.8-2004 Test method for physical properties of composite material prepreg Part 8:Determination of tack
HB 7736.2-2004 Test method for physical properties of composite material prepreg Part 2:Determination of mass per unit area
HB 7736.5-2004 Test method for physical properties of composite material prepreg Part 5:Determination of resin content
HB 7736.7-2004 Test method for physical properties of composite material prepreg Part 7:Determination of gel time
HB 7736.3-2004 Test method for physical properties of composite material prepreg Part 3:Determination of fiber mass per unit area
HB 7736.4-2004 Test method for physical properties of composite material prepreg Part 4:Determination of volatiles content
HB 7736.6-2004 Test method for physical properties of composite material prepreg Part 6:Determination of resin flow

Professional Standard - Building Materials, Prepreg

JC/T 774-2004 Test method for gel time of prepreg
JC/T 780-2004 Test method for resin content of prepreg
JC/T 775-2004 Test method for resin flow of prepreg
JC/T 776-2004 Test method for volatile content of prepreg

Professional Standard - Machinery, Prepreg

JB/T 10942-2010 F-class prepregs-combined flexible materials for dry transformer
JB/T 10949-2010 H-class prepregs-combined flexble materials for dry transfomer

SAE - SAE International, Prepreg

SAE AS7118/1A-2008 Nadcap Requirements for Prepreg/Adhesive Bonding
SAE AS7118/1-2004 Nadcap REQUIREMENTS FOR PREPREG/ADHESIVE BONDING
SAE AMS3961-2015 350 °F Autoclave Cure@ Low Flow Toughened Epoxy Prepregs
SAE AMS3960A-2015 Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape

Military Standard of the People's Republic of China-General Armament Department, Prepreg

GJB 3945A-2021 Specification for Aramid/Epoxy Prepregs
GJB 3945-2000 Specification for Aramid/Epoxy Prepregs
GJB 3065A-2021 General specification for carbon fiber unidirectional and fabric prepregs
GJB 3065-1997 General specification for carbon fiber unidirectional and fabric prepregs
GJB 482-1988 Test methods for glass, high silica and quartz fiber prepregs
GJB 2651-1996 Test method for infrared index of carbon/phenolic and carbon/epoxy prepregs

Society of Automotive Engineers (SAE), Prepreg

SAE AMS3970/2A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg
SAE AMS3970/3A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 3 - Purchasing Specification for Carbon Prepreg
SAE AMS6885/3-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 3 - Purchasing Specification for Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg
SAE AMS3970/5-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 5 - Purchasing Specification for Companion Non-Structural Glass Fiber Fabric Prepreg
SAE AMS6885/2-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 2 - Qualification Program for Fiber, Carbon Fiber Tape Prepreg, and Film Adhesive
SAE AMS3970/2A-2011 Carbon Fiber Fabric Repair Prepreg, 120°C (250°F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg
SAE AMS3970/3A-2011 Carbon Fiber Fabric Repair Prepreg, 120°C (250°F) Vacuum Curing Part 3 - Purchasing Specification for Carbon Prepreg
SAE AMS6885-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 0 - Introduction
SAE AMS3970A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction
SAE AMS3960-2011 Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape
SAE AMS6885/1-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 1 - General Requirements
SAE AMS3970/1A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements
SAE AMS6885/5-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 5 - Material Specification for Unidirectional Carbon Fiber Tape Epoxy Prepreg for Repair and Film Adhesive for Repair, 120 to 145 °C (250 to 290 °F) Curing
SAE AMS6891-2020 Carbon Fiber and Fiberglass Epoxy Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications
SAE AMS6885/4-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
SAE AMS3970/4A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive

IN-BIS, Prepreg

IS 12284-1988

International Organization for Standardization (ISO), Prepreg

ISO 15040:1999 Composites - Prepregs - Determination of gel time
ISO 15034:1999 Composites - Prepregs - Determination of resin flow
ISO/DIS 23927:2023 Laminates and moulding compounds — Prepregs — Determination of tack
ISO 8606:1990 Plastics; prepregs; bulk moulding compound (BMC) and dough moulding compound (DMC); basis for a specification
ISO/CD 8606:2023 Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Requirements and specifications
ISO 8604:1988 Plastics; prepregs; definitions of terms and symbols for designations
ISO 9782:1993 Plastics; reinforced moulding compounds and prepregs; determination of apparent volatile-matter content
ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 10352:1997 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
ISO 1268-4:2005 Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs
ISO 10352:1991 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
ISO 10352:2020 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
ISO/FDIS 1172:1980 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
ISO 1172:2023 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
ISO 1268-4:2005/Amd 1:2010 Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs; Amendment 1
ISO 1172:1996 Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods

国家市场监督管理总局、中国国家标准化管理委员会, Prepreg

GB/T 41488-2022 Plastics—Prepregs—Definitions of terms and symbols for designations

Association Francaise de Normalisation, Prepreg

NF EN 12970:2000 Composites - Préimprégnés - Détermination du temps de gélification
NF ISO 15040:2001 Composites - Préimprégnés - Détermination du temps de gélification
NF T57-617*NF ISO 15040:2001 Composites - Prepregs - Determination of gel time
NF L17-461:1993 Série aérospatiale - Préimprégnés - Détermination de la pégosité.
NF ISO 15034:2001 Composites - Préimprégnés - Détermination de l'écoulement de résine
NF ISO 8604:1989 Plastiques - Préimprégnés - Définitions de termes et symboles pour les désignations.
NF EN 2833-005:2014 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 005 : verre textile/résine phénolique préimprégnés
NF EN 2557:1997 Série aérospatiale - Préimprégnés de fibres de carbone. Détermination de la masse surfacique
NF EN 13677-1:2003 Préimprégnés renforcés thermoplastiques - Spécifications des GMT - Partie 1 : désignation
NF EN 13677-3:2003 Préimprégnés renforcés thermoplastiques - Spécifications des GMT - Partie 3 : exigences particulières
NF ISO 9782:1994 Plastiques renforcés - Compositions pour moulage et préimprégnés - Détermination de la teneur apparente en matières volatiles.
NF EN 2558:1997 Série aérospatiale - Préimprégnés de fibres de carbone. Détermination de la teneur en matières volatiles
NF EN 2560:1998 Série aérospatiale - Préimprégnés de fibres de carbone - Détermination de l'écoulement de résine.
NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
NF C93-780-4-11*NF EN 61249-4-11:2006 Materials for printed boards and other interconnecting structures - Part 4-11 : sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability
NF C93-780-4-2*NF EN 61249-4-2:2006 Materials for printed boards and other interconnecting structures - Part 4-2 : sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
XP PR EN 2833-2:1995 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 2 : verre textile/résine époxy préimprégnée avec une température de polymérisation jusqu'à 125 degrés Celsius utilisation co...
NF T57-153-4*NF ISO 1268-4:2006 Fibre-reinforced plastics - Methods of producing test plates - Part 4 : moulding of prepregs
NF L17-455:1988 Aéronautique et espace - Matériaux composites à base de préimprégnés de résine thermodurcissable - Résistance au pelage.
NF C93-780-4-12*NF EN 61249-4-12:2006 Materials for printed boards and other interconnecting structures - Part 4-12 : sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
NF EN 2329:1993 Série aérospatiale - Préimprégnés de fibres de verre textile - Méthode d'essai pour la détermination de la masse surfacique
NF C93-780-4-5*NF EN 61249-4-5:2006 Materials for printed boards and other interconnecting structures - Part 4-5 : sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
NF EN 61249-4-14:2014 Matériaux pour cartes imprimées et autres structures d'interconnexion - Partie 4-14 : série de spécifications intermédiaires pour matériaux pré-imprégnés, non plaqués (pour la fabrication des cartes multicouches) - Tissu de verre époxyde pr...
NF EN 14598-1:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préimprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 1 : désignation
NF EN ISO 12114:1997 Plastiques renforcés de fibres - Compositions de moulage thermodurcissables et préimprégnés - Détermination des caractéristiques de durcissement.
NF EN 13677-2:2003 Préimprégnés renforcés thermoplastiques - Spécifications des GMT - Partie 2 : méthodes d'essai et exigences générales
NF EN 2332:1993 Série aérospatiale - Préimprégnés de verre textile - Méthode d'essai pour la détermination de l'écoulement de résine
NF EN ISO 10352:2020 Plastiques renforcés de fibres - Mélanges à mouler et préimprégnés - Détermination de la masse surfacique et de la masse des fibres par unité de surface
NF EN 14598-3:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préiprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 3 : exigences spécifiques
NF EN 2330:1993 Série aérospatiale - Préimprégnés de fibres de verre textile - Méthode d'essai pour la détermination de la teneur en matières volatiles
NF ISO 1268-4/A1:2011 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 4 : moulage de préimprégnés - Amendement 1
NF EN ISO 11667:1999 Plastiques renforcés de fibre - Préimprégnés et compositions de moulage - Détermination des taux de résine, de fibre de renfort et de charge minérale. Méthodes par dissolution.
NF EN ISO 1172:1999 Plastiques renforcés de verre textile - Préimprégnés, compositions de moulage et stratifiés - Détermination des taux de verre textile et de charge minérale. Méthodes par calcination.
XP PR EN 2833-1:1995 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 1 : généralités.
NF T57-511*NF EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
NF EN ISO 7088:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préimprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 2 : méthodes d'essai et exigences générales
NF EN 14598-2:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préimprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 2 : méthodes d'essai et exigences générales
NF EN 50107-2:2005 Mélanges à mouler thermodurcissables renforcés - Spécification pour mats préimprégnés (SMC) et mélanges à mouler en masse (BMC) - Partie 2 : méthodes d'essai et exigences générales

German Institute for Standardization, Prepreg

DIN EN 2833-005:2014-02 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate; German and English version EN 2833-005:2013
DIN 65142:1989-11 Aerospace; preimpregnated fibre sheet and tape (prepreg); determination of bond strength
DIN 65090:1979-07 Aerospace; textile glass, preimpregnated filament glass cloth from E-glass (Prepreg), technical specifications
DIN EN 2558:1997-03 Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997
DIN EN 61249-4-1:2008-10 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-1:20...
DIN EN 2557:1997-05 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997
DIN 29971:1991-09 Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification
DIN 65673:1999-04 Aerospace - Fibre reinforced plastics - Description of yarn, fabric and prepreg defects
DIN EN 61249-4-1:2008 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-1:2008)
DIN EN ISO 1172:1998-12 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998 / Note: To be replaced by DIN EN ISO 11...
DIN EN ISO 12114:1997-08 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997
DIN EN ISO 1172:2022-11 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022); German and English version prEN ISO 1172:2022 / Note: Date of issu...
DIN EN 61249-4-12:2006 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-12:2005); German
DIN EN 61249-4-2:2006 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-2:2005); German version EN 61249-4
DIN EN ISO 10352:2020-12 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
DIN EN 61249-4-2:2006-03 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-2:2005); German version EN 6124...
DIN EN 61249-4-11:2006-03 Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-11:2005); German version EN 61...
DIN 65572:1992 Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification
DIN 65071-3:2018-08 Aerospace series - Fibre reinforced moulding materials - Part 3: Preparation of honeycomb/prepreg sandwich test panels
DIN EN ISO 12115:1997-08 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997
DIN EN 61249-4-5:2006 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability (IEC 61249-4-5:2005); German version
DIN EN ISO 11667:1999-10 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999
DIN EN 61249-4-5:2006-03 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability (IEC 61249-4-5:2005); German vers...
DIN EN 61249-4-12:2006-03 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-12:2005); Germ...
DIN 65629:1993-12 Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification
DIN 65572:1992-11 Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification

ES-UNE, Prepreg

UNE-EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate (Endorsed by AENOR in October of 2013.)
UNE-EN 61249-4-1:2008 Materials for interconnecting structures -- Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability. (Endorsed by AENOR in September of 2008.)
UNE-EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures -- Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability (Endorsed by AENOR in Janu...
UNE-EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures -- Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability (Endorsed by AENOR in January of 2006.)
UNE-EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
UNE-EN 61249-4-11:2005 Materials for printed boards and other interconnecting structures -- Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability (Endorsed by AENOR in January of 2006.)
UNE-EN 61249-4-5:2005 Materials for printed boards and other interconnecting structures -- Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability (Endorsed by AENOR in January of...

GOSTR, Prepreg

GOST R 58060-2018 Nanomodified Prepregs. Types and main parameters
GOST R 57785-2017 Polymer composites. Prepregs and premixes. Determination of compression moulding shrinkage

British Standards Institution (BSI), Prepreg

BS ISO 15034:1999 Composites - Prepregs - Determination of resin flow
BS ISO 15034:2000 Composites. Prepregs. Determination of resin flow
21/30411211 DC BS ISO 23927. Laminates and moulding compounds. Prepregs. Determination of tack
BS ISO 1268-4:2005+A1:2010 Fibre-reinforced plastics. Methods of producing test plates. Moulding of prepregs
BS EN 61249-4-14:2009 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead
BS EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional expoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-11:2005 Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burn
BS EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability
BS EN ISO 10352:2010 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN 61249-4-1:2008 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability
BS EN ISO 1172:2023 Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content using calcination methods
BS EN ISO 10352:2020 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
22/30448262 DC BS EN ISO 1172. Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile glass and mineral-filler content. Calcination methods

Korean Agency for Technology and Standards (KATS), Prepreg

KS M ISO 8604:2003 Plastics－Prepregs－Definitions of terms and symbols for designations
KS M ISO 8604-2003(2018) Plastics－Prepregs－Definitions of terms and symbols for designations
KS C 6459-1997 Test methods of prepreg for multilayer printed wiring boards
KS C 6454-2002 GENERAL RULES OF PREPREG FOR MULTILAYER PRINTED WIRING BOARDS
KS C 6458-1997(2017) Prepreg for multilayer printed wiring boards (Epoxy resin-Impregnated glass cloth)
KS M ISO 8606:2006 Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
KS M ISO 8606-2006(2016) Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
KS M ISO 8606-2006(2021) Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
KS W 0121-2004(2014) Glass reinforced epoxy prepreg for aircraft structures,177℃(350℉) service
KS C 6454-1995(2000) GENERAL RULES OF PREPREG FOR MULTILAYER PRINTED WIRING BOARDS
KS C 6459-1997(2012) TEST METHODS OF PREPREG FOR MULTILAYER PRINTED WIRING BOARDS
KS C 6458-1997(2022) Prepreg for multilayer printed wiring boards (Epoxy resin-Impregnated glass cloth)
KS C IEC 61249-4-1-2012(2022) Materials for printed boards and other interconnecting structures－Part 4-1：Sectional specification set for prepreg materials, unclad(for the manufacture of multilayer boards)－Epoxide woven E-glass pre
KS M ISO 9782-2002(2022) Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content
KS M ISO 9782-2002(2017) Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content
KS C IEC 61249-4-1-2012(2017) Materials for printed boards and other interconnecting structures－Part 4-1：Sectional specification set for prepreg materials, unclad(for the manufacture of multilayer boards)－Epoxide woven E-glass pre
KS M ISO 10352-2012(2017) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS C IEC 61249-4-11:2008 Materials for printed boards and other interconnecting structures-Part 4-11:Sectional specification set for prepreg materials, unclad-Non-halogenated epoxide, woven E-glass prepreg of defined flammability
KS C IEC 61249-4-2:2008 Materials for printed boards and other interconnecting structures-Part 4-2:Sectional specification set for prepreg materials, unclad-Multifunctional epoxide woven E-glass prepreg of defined flammability
KS C IEC 61249-4-11:2013 Materials for printed boards and other interconnecting structures－Part 4－11：Sectional specification set for prepreg materials, unclad－Non-halogenated epoxide, woven E-glass prepreg of defined flammability
KS C IEC 61249-4-2:2013 Materials for printed boards and other interconnecting structures－Part 4－2：Sectional specification set for prepreg materials, unclad－Multifunctional epoxide woven E-glass prepreg of defined flammability
KS C 6458-1997 Prepreg for multilayer printed wiring boards (Epoxy resin-Impregnated glass cloth)
KS C 6511-1996(2001) PREPREG FOR MULTILAYER PRINTED WIRING BOARDS (BT/EPOXY RESIN-IMPREGNATED GLASS CLOTH)
KS M ISO 10352-2012(2022) Fibre-reinforced plastics－Moulding compounds and prepregs－Determination of mass per unit area
KS C IEC 61249-4-12:2008 Materials for printed boards and other interconnecting structures-Part 4-12:Sectional specification set for prepreg material, unclad-Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
KS C IEC 61249-4-12:2013 Materials for printed boards and other interconnecting structures－Part 4－12：Sectional specification set for prepreg material, unclad－Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
KS M ISO 12114-2002(2020) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of cure characteristics
KS C IEC 61249-4-5:2008 Materials for printed boards and other interconnecting structures-Part 4-5:Sectional specification set for prepreg materials, unclad-Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
KS C IEC 61249-4-5:2013 Materials for printed boards and other interconnecting structures－Part 4－5：Sectional specification set for prepreg materials, unclad－Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
KS C 6513-1997 PREPREG FOR MULTILAYER PRINTED WIRING BOARDS - MODIFIED OR UNMODIFIED POLYIMIDE RESIN - IMPREGNATED GLASS CLOTH
KS C 6513-2002 PREPREG FOR MULTILAYER PRINTED WIRING BOARDS - MODIFIED OR UNMODIFIED POLYIMIDE RESIN - IMPREGNATED GLASS CLOTH
KS C 6514-2002 PREPREG FOR MULTILAYER PRINTED WIRING BOARDS - BISMALEIMIDE/TRIAZINE/EPOXIDE RESIN - IMPREGNATED GLASS CLOTH
KS W 0121-2016 Glass reinforced epoxy prepreg for aircraft structures,177℃(350℉) service
KS C IEC 61249-4-17-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-17：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Non-halogenated epoxide
KS C IEC 61249-4-14-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-14：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Epoxide woven E-glass p
KS C IEC 61249-4-15-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-15：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Multifunctional epoxide
KS C IEC 61249-4-14-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-14：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Epoxide woven E-glass p
KS C IEC 61249-4-14:2011 Materials for printed boards and other interconnecting structures－Part 4-14：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Epoxide woven E-glass prepreg of defined flammability (vertical burning test)
KS C IEC 61249-4-17-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-17：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Non-halogenated epoxide
KS C IEC 61249-4-15-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-15：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Multifunctional epoxide
KS C IEC 61249-4-16-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-16：Sectional specification set for prepreg materials,unclad (for the manufacture of multilayer boards)－Multifunctional non-halo
KS M ISO 1172-2002(2017) Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content-Calcination methods
KS M ISO 11667-2002(2017) Fibre－reinforced plastics－Moulding compounds and prepregs－Determination of resin, reinforced－fibre and mineral－filler content－Dissolution methods
KS M ISO 12115-2002(2022) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of flowability, maturation and shelf life
KS M ISO 12115-2002(2017) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of flowability, maturation and shelf life
KS C IEC 61249-4-15:2011 Materials for printed boards and other interconnecting structures－Part 4-15：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Multifunctional epoxide woven E-glass prepreg of defined flammability (vertica
KS C IEC 61249-4-16:2011 Materials for printed boards and other interconnecting structures－Part 4-16：Sectional specification set for prepreg materials,unclad (for the manufacture of multilayer boards)－Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flamma
KS C IEC 61249-4-17:2011 Materials for printed boards and other interconnecting structures－Part 4-17：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertica
KS C IEC 61249-4-16-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-16：Sectional specification set for prepreg materials,unclad (for the manufacture of multilayer boards)－Multifunctional non-halo
KS M ISO 11667-2002(2022) Fibre－reinforced plastics－Moulding compounds and prepregs－Determination of resin, reinforced－fibre and mineral－filler content－Dissolution methods

Professional Standard - Aerospace, Prepreg

QJ 3184-2003 Specification for T300 Carbon Fiber/AG-80 Epoxy Resin Prepreg

Group Standards of the People's Republic of China, Prepreg

T/CSTM 00888-2023 Continuous carbon fiber reinforced thermoplastic unidirectional prepregs
T/CAMMT 31-2020 Molding process of composite prepreg
T/CSAA 7-2021 pecification for HQW180B/F·JN-4-01 hollow quartz fiber reinforced modified cyanate ester resin prepreg
T/CSAA 8-2021 Specification for QRB400/F?JN-4-01 unidirectional quartz fiber reinforced modified cyanate ester resin prepreg
T/CSAA 6-2021 Specification for QWGJ/F?JN-4-01 high precision quartz fiber reinforced modified cyanate ester resin prepreg

American Society for Testing and Materials (ASTM), Prepreg

ASTM D3529-16 Standard Test Methods for Constituent Content of Composite Prepreg
ASTM D3529-16(2021) Standard Test Methods for Constituent Content of Composite Prepreg
ASTM D3530/D3530M-97(2003) Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530/D3530M-97 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530-20 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3532-99(2004) Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D3532-99 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D3531/D3531M-16 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASTM D3532/D3532M-19 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D3530M-97(2008)e1 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530-97(2008)e2 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530/D3530M-97(2008) Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D8132/D8132M-23 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
ASTM C613/C613M-97 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C613-19 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM D8132/D8132M-17 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
ASTM D3530-97(2015) Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3532/D3532M-12 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D3531-99(2004) Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASTM D3531-99 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASTM D3531/D3531M-11 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASTM D8336-21 Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure
ASTM C613/C613M-97(2003)e1 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C613/C613M-97(2008) Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C613M-97(2008)e1 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C613-97(2008)e2 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM D3529/D3529M-97(2003)e1 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM D3529/D3529M-97 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM D3529/D3529M-97(2008) Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM D3529M-10 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM C613-14 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction

KR-KS, Prepreg

KS C IEC 61249-4-2-2008 Materials for printed boards and other interconnecting structures－Part 4－2：Sectional specification set for prepreg materials, unclad－Multifunctional epoxide woven E-glass prepreg of defined flammabili
KS C IEC 61249-4-11-2008 Materials for printed boards and other interconnecting structures－Part 4－11：Sectional specification set for prepreg materials, unclad－Non-halogenated epoxide, woven E-glass prepreg of defined flammabi
KS C IEC 61249-4-12-2008 Materials for printed boards and other interconnecting structures－Part 4－12：Sectional specification set for prepreg material, unclad－Non-halogenated multifunctional epoxide woven E-glass prepreg of de

Professional Standard - Electron, Prepreg

SJ/T 11050-2014 Prepreg used as bonding sheet for multilayer printed boards.Epoxy resin-impregnated glass cloth
SJ/T 11050-1996 Prepreg materials for bonding sheets in the fabrication of multilayer printed boards

未注明发布机构, Prepreg

DIN EN ISO 10352:1997 Fiber-reinforced plastics – molding compounds and prepregs – determination of the basis weight
BS EN ISO 1172:1999(2000) Textile - glass - reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile - glass and mineral - filler content — Calcination methods

Fujian Provincial Standard of the People's Republic of China, Prepreg

DB35/T 1356-2013 Halogen-free epoxy glass fiber cloth adhesive sheet prepreg for multilayer printed board

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Prepreg

PREN 2375-1989 Aerospace Series Resin Preimpregnated Materials Production Batch Sampling Procedure (Edition 1)
PREN 6039-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Exothermic Reaction During Curing of Prepreg Material (Edition P1)

European Committee for Electrotechnical Standardization（CENELEC）, Prepreg

EN 61249-4-11:2005 Materials for printed boards and other interconnecting structures Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability
EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
EN 61249-4-19:2013 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined
EN 61249-4-14:2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t
EN 61249-4-18:2013 Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (v
EN 61249-4-17:2009 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (ve

International Electrotechnical Commission (IEC), Prepreg

IEC 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
IEC 61249-4-11:2005 Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide woven E-glass prepreg of defined flammability
IEC 61249-4-1:2008 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability
IEC 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
IEC 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
IEC 61249-4-14:2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t
IEC 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
IEC 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
IEC 61249-4-17:2009 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (ve

Danish Standards Foundation, Prepreg

DS/EN 61249-4-2:2006 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
DS/EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
DS/EN 2557:1997 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
DS/EN 61249-4-11:2006 Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability
DS/EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
DS/EN 61249-4-1:2008 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability
DS/EN 61249-4-12:2006 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
DS/EN 61249-4-5:2006 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
DS/EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
DS/EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
DS/EN 61249-4-14:2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t
DS/EN 61249-4-17:2009 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (ve
DS/EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs Determination of flowability, maturation and shelf life
DS/EN ISO 1172:1999 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods
DS/EN ISO 11667:1999 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods

Lithuanian Standards Office , Prepreg

LST EN 2557-2001 Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
LST EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
LST EN 61249-4-2-2005 Materials for printed boards and other interconnecting structures. Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-2:2005)
LST EN 61249-4-1-2008 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-1:2008)
LST EN 61249-4-17-2009 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (ve
LST EN 61249-4-16-2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined
LST EN 61249-4-15-2009 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve
LST EN 61249-4-14-2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t
LST EN ISO 12114:2000 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997)
LST EN 61249-4-5-2005 Materials for printed boards and other interconnecting structures. Part 4-5: Sectional specification set for prepreg materials, unclad. Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability (IEC 61249-4-5:2005)
LST EN 61249-4-12-2005 Materials for printed boards and other interconnecting structures. Part 4-12: Sectional specification set for prepreg materials, unclad. Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability (IEC 61249-4-12:2005)
LST EN 61249-4-11-2005 Materials for printed boards and other interconnecting structures. Part 4-11: Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide, woven E-glass prepreg of defined flammability (IEC 61249-4-11:2005)
LST EN 61249-4-19-2014 Materials for printed boards and other interconnecting structures -- Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of define
LST EN ISO 12115:2000 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997)
LST EN ISO 1172:2000 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
LST EN 61249-4-18-2014 Materials for printed boards and other interconnecting structures -- Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (
LST EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

Professional Standard - Military and Civilian Products, Prepreg

WJ 2432-1997 Epoxy resin and its prepreg epoxy index test method infrared spectroscopy

工业和信息化部, Prepreg

SJ/T 11481-2014 Cyanate modified epoxy fiberglass cloth adhesive sheet prepreg for multilayer printed boards

AENOR, Prepreg

UNE-ISO 1268-4:2012 Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs
UNE-EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
UNE-EN ISO 12114:1997 FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF CURE CHARACTERISTICS. (ISO 12114:1997).
UNE-EN 2332:1996 AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN FLOW.
UNE-EN 2329:1996 AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA.
UNE-EN ISO 12115:1998 FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF FLOWABILITY, MATURATION AND SHELF LIFE. (ISO 12115:1997).

Japanese Industrial Standards Committee (JISC), Prepreg

JIS K 7016-4:2009 Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs
JIS K 7052:1999 Textile glass reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination method

机械工业部, Prepreg

JB/T 8202-1995 Adhesive sheet prepreg material for multilayer printed boards

European Association of Aerospace Industries, Prepreg

AECMA PREN 6039-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Exothermic Reaction During Curing of Prepreg Material Edition P1

IT-UNI, Prepreg

UNI EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area

European Committee for Standardization (CEN), Prepreg

EN ISO 1172:2023 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods (ISO 1172:2023)
EN ISO 11667:1999 Fibre Reinforced Plastics - Mouldings Compounds and Prepregs - Determination of Resin, Reinforcement-Fibre and Mineral-Filler Content - Dissolution Methods
prEN ISO 1172 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022)

Taiwan Provincial Standard of the People's Republic of China, Prepreg

CNS 13062-1992 Methods of Test for Prepreg of Carbon Fiber and Epoxy Resins

AT-ON, Prepreg

OENORM EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

CH-SNV, Prepreg

SN EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)

PL-PKN, Prepreg

PN-EN ISO 10352-2021-02 E Fibre-reinforced plastics--Moulding compounds and prepregs--Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)