ZH
RU
ES
linear dimension
linear dimension, Total:221 items.
In the international standard classification, linear dimension involves: Linear and angular measurements, Rubber and plastics products, Cellular materials, Plastics, Footwear, Headgear. Clothing accessories. Fastening of clothing, Shop fittings, Technical drawings, Construction materials, Horology, Materials for the reinforcement of composites, Leather technology, Rubber, Seals, glands, Products of the textile industry, Kitchen equipment, Mechanical testing, Clothes, Quality, Optics and optical measurements, Electricity. Magnetism. Electrical and magnetic measurements, Wood, sawlogs and sawn timber, Wood-based panels.
VN-TCVN, linear dimension
- TCVN 192-1986 Standard linear dimensions
- TCVN 5792-1994 Knitted fabrics and garments.Measurement of linear dimensions
- TCVN 7180-1-2002 Commercial refrigerated cabinets.Methods of test.Part 1: Calculation of linear dimensions, areas and volumes
CZ-CSN, linear dimension
RO-ASRO, linear dimension
- STAS 75-1990 NORMAI. LINEAL DIMENSIONS
- STAS 8100/1-1988 CIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS Terminology and symbols
- STAS 9664-1974 PLASTICS Determination of change in linear dimensions of non-rigid thermoplaslics films
- STAS 8100/3-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes for dimensions up to 3150 mm
- STAS 8100/4-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes selection for dimensions up to 500 mm
- STAS 8100/2-1988 LIMITS AND PITS SYSTEM FOR LINEAR DIMENSIONS Fundamental limits and fundamental fits for dimensions up to 3150 mm
GOSTR, linear dimension
- GOST 6636-1969 Standard linear dimensions
- GOST 25015-2017 Celluar plasticsand and foam rubber. Method for measuring linear dimensions
- GOST R 8.670-2009 State system for ensuring the uniformity of measurements. Precision inductive transducers for linear dimensions (parameters). Methods of verifications
PT-IPQ, linear dimension
SE-SIS, linear dimension
Professional Standard - Chemical Industry, linear dimension
RU-GOST R, linear dimension
- GOST 33694-2015 Plastics. Determination of linear dimensions of test specimens
- GOST 9133-1978 Footwear. Methods of determination of linear sizes
- GOST R 50203.1-1992 Smallwares. Method for determination of linear dimensions
- GOST 16218.1-1993 Smallwares. Method for determination of linear dimensions
- GOST 16218.1-1982 Small wares. Method for the determination of linear dimension
- GOST 6943.7-1979 Glass textile products. Methods for determination of linear dimensions, surface and linear density
- GOST 938.13-1970 Leather. Method of measuring of weight and linear sizes of samples
- GOST 25015-1981 Plastics celluar and foam rubber. Method for measuring linear dimensions
- GOST 26289-1984 Fabrics for underwear. Norms of determining linear measurements after wet treatment
- GOST EN 12085-2011 Thermal insulating products for applications in building. Methods for determination of linear dimensions of test specimens
- GOST R 51729-2001 Knitted garments. Method of determining change in linear dimensions after wet treatment
- GOST 4.447-1986 Product-quality index system. Optical instruments for linear measurements. Nomenclature of indices
- GOST 31423-2010 Knitted garments. Method of determining the change in linear dimensions after wet treatment
- GOST 13711-1982 Knitted fabrics. Method of determination change in linear dimensions after wet treatments
- GOST 8.051-1981 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
- GOST R EN 12085-2008 Thermal insulating products for applications in building. Methods for measurement of linear dimensions of test specimens
- GOST 23284-1978 Knit-sewed fabric. Methods for the determination of change of linear dimensions after washing and ironing
- GOST R 52221-2004 Nonwoven fabrics. Methods of determination of the heat resistance and the linear dimensions change after thermal treatment
- GOST 8.491-1983 State system for ensuring the uniformity of measurements. Electrocontact converters for checking linear dimensions. Methods and means of verification
- GOST 26214-1984 Products of wood and wooden materials. Permissible errors in measuring linear dimensions
- GOST 26223-1984 Knitted gloves and mittens. Method for determination of finished products linear dimensions changes after wet treatment
- GOST R EN 1107-1-2008 Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of linear dimensional change
- GOST 6449.1-1982 Products of wood and wooden materials. Tolerance zones for linear dimensions and recommended fits
- GOST EN 1107-1-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of linear dimensional change
- GOST 18276.3-1988 Machine-made textile floor coverings and carpet products. Methods for determination of linear dimensions, surface density and surface density of pile
- GOST 18081-1993 Narrow fabrics, braids and knitted fabrics. Method of determining change in linear dimensions after wet treatments
- GOST R 50235-1992 Narrow fabrics, braids and knitted fabrics. Method of determining change in linear dimensions after wet treatments
- GOST 12867-1977 All-wool and half-wool fabrics for dresses. Method for determination of linear dimensional change after wet ironing
- GOST 26667-1985 Knitted fabrics for outwear and gloves. Norms of determination linear measurement after wet treatment
- GOST 18068-1972 Laminated glued wood. Method of determining linear dimension changes in accordance with relative humidity
- GOST 8.549-1986 The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensians to 500 mm with unindicated tolerances
- GOST 8846-1987 Knitted fabrics and garments. Methods for determination of linear demensions, distortion number of courses and wales and yarn length in the loop
- GOST R 8.672-2009 State system for ensuring the uniformity of measurements. Transducers with electric contacts for measuring the linear dimensions (parameters). Verification methods
- GOST EN 1107-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of linear dimensional change
- GOST 17729-1993 Smallwares. Laces, lace, curtain and curtain lace cloths, guipure, embroidery. Method of determining change in linear dimensions after wet treatment
- GOST 17729-1972 Smallwares. Laces, lace, curtain and curtain lace cloths, guipure, embroidery. Method of determining change in linear dimensions after wet treatment
Korean Agency for Technology and Standards (KATS), linear dimension
- KS M ISO 16012:2014 Plastics — Determination of linear dimensions of test specimens
- KS M ISO 16012-2014(2019) Plastics — Determination of linear dimensions of test specimens
- KS M ISO 1923:2010 Cellular plastics and rubbers-Determination of linear dimensions
- KS M ISO 1923-2010(2020) Cellular plastics and rubbers－Determination of linear dimensions
- KS A 0108-2001 Technical drawings-Tolerancing of linear and angular dimensions
- KS B ISO 14405-1:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
- KS B ISO 406:2006 Technical drawings-Tolerancing of linear and angular dimensions
- KS B ISO 14405-2:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
- KS B ISO 1938-1:2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
- KS B ISO 286-1:2009 ISO system of limits and fits-Part 1:Bases of tolerances, deviations and fits
- KS B ISO 1992-1-2003(2008) Commericial refrigerated cabinets－Methods of test－Part 1：Calculation of linear dimensions, areas and volumes
- KS B ISO 286-1:2016 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
- KS B ISO 1992-1:2003 Commericial refrigerated cabinets-Methods of test-Part 1:Calculation of linear dimensions, areas and volumes
Association Francaise de Normalisation, linear dimension
- NF T58-009*NF EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens
- NF EN ISO 1923:1995 Plastiques et caoutchoucs alvéolaires - Détermination des dimensions linéaires.
- NF E01-001:1967 Nominal linear dimensions from 1 mm to 500 mm for mechanical engineering.
- NF P75-214:1997 Thermal insulating products for building applications. Determination of linear dimensions of test specimens.
- NF EN ISO 14405-1:2016 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 1 : tailles linéaires
- NF T56-119*NF EN ISO 1923:1995 Cellular plastics and rubbers. Determination of linear dimensions.
- NF E11-062:1985 Electronic comparators. Linear dimensional sensors. Test methods.
- NF E04-563-1:2011 Geometrical Product Specification (GPS) - Dimensional tolerancing - Part 1 : linear sizes.
- NF E04-563-1*NF EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes
- NF P75-214*NF EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- NF E11-061:1992 Electronic comparators. Linear dimensionalsensors. Technical data sheet.
- NF T56-121:1983 Determination of the average linear dimensions of rigid cellular products in sheet form.
- NF D74-005-3:1994 Regrigerated display cabinets. Part 3 : linear dimensions, areas and volumes.
- NF E04-563-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes.
- NF E02-200-1*NF EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size
- NF E02-350-1*NF EN 22768-1:1993 General tolerances. Part 1 : tolerances for linear and angular dimensions without individual tolerance indications.
- NF EN ISO 1938-1:2015 Spécification géométrique des produits (GPS) - Équipement de mesure dimensionnel - Partie 1 : calibres lisses à limites de taille linéaire
British Standards Institution (BSI), linear dimension
- BS EN ISO 16012:2015 Plastics. Determination of linear dimensions of test specimens
- BS EN ISO 14405-1:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
- BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
- BS EN 441-3:1995 Refrigerated display cabinets - Linear dimensions, areas and volumes
- BS EN ISO 14405-1:2016 Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
- BS EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions
- BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear sizes
- BS EN 12085:2013 Thermal insulating products for building applications. Determination of linear dimensions of test specimens
- BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment. Plain limit gauges of linear size
- 17/30358444 DC BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing - Part 2. Dimensions other than linear sizes
- BS EN ISO 29768:2022 Thermal insulating products for building applications. Determination of linear dimensions of test specimens
- 21/30398648 DC BS EN ISO 29768. Thermal insulating products for building applications. Determination of linear dimensions of test specimens
- BS EN ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Basis of tolerances, deviations and fits
Military Standard of the People's Republic of China-General Armament Department, linear dimension
- GJB 442-1988 Determination of linear dimensions of weather balloons
TR-TSE, linear dimension
- TS 1856-1975 RIGID CELLULAR PLASTICS — DETERMINATION OF LINEAR DIMENSIONS
European Committee for Standardization (CEN), linear dimension
- EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
- EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
- EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- EN ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
- EN ISO 1923:1995 Cellular Plastics and Rubbers - Determination of Linear Dimensions (ISO 1923:1981)
- EN 12085:1997 Thermal Insulating Products for Building Applications - Determination of Linear Dimensions of Test Specimens
- EN 441-3:1994 Refrigerated Display Cabinets - Part 3: Linear Dimensions, Areas and Volumes
- prEN ISO 29768:2021 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO/DIS 29768:2021)
- EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
- EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
- EN ISO 286-1:2010/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
- prEN 441-3-1991 Commercial refrigerated cabinets; part 3: calculation of linear dimensions, areas and volumes
- EN ISO 286-2:2010/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
- EN 12430:1998 Thermal Insulating Products for Building Applications - Determination of Behaviour under Point Load Incorporating A1: 2006
- EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
BR-ABNT, linear dimension
BE-NBN, linear dimension
International Organization for Standardization (ISO), linear dimension
- ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
- ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
- ISO 1923:1972 Title missing - Legacy paper document
- ISO 1923:1981 Cellular plastics and rubbers; Determination of linear dimensions
- ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
- ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
- ISO/CD 14405-1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
- ISO 29768:2022 Thermal insulating products for building applications — Determination of linear dimensions of test specimens
- ISO 16012:2004/cor 1:2005 Plastics - Determination of linear dimensions of test specimens; Technical Corrigendum 1
- ISO 29768:2008 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
- ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size
- ISO 1992-1:1974 Commercial refrigerated cabinets; methods of test; part 1: calculation of linear dimensions, areas and volumes
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, linear dimension
- GB/T 1804-1992 General tolerances. Tolerances for linear dimensions without individual tolerance indications
- GB/T 6342-1996 Cellular plastics and rubbers--Determination of linear dimensions
Japanese Industrial Standards Committee (JISC), linear dimension
- JIS K 7153:2008 Plastics -- Determination of linear dimensions of test specimens
- JIS K 7248:2005 Cellular plastics and rubbers -- Determination of linear dimensions
- JIS B 0420-1:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
- JIS B 8611-1:1999 Commercial refrigerated cabinets -- Methods of test -- Part 1: Calculation of linear dimensions, areas and volumes
ES-UNE, linear dimension
- UNE-EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
- UNE-EN ISO 14405-1:2018 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
- UNE-EN ISO 29768:2023 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
- UNE-EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) (Endorsed by AENOR in February of 2016.)
German Institute for Standardization, linear dimension
- DIN EN ISO 16012:2016-02 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015); German version EN ISO 16012:2015
- DIN EN ISO 14405-1:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016
- DIN 16901:1982 Plastics mouldings; Tolerances and acceptance conditions for linear dimensions
- DIN 53534:2000 Testing of rubber - Determination of linear dimensions of test pieces and products
- DIN EN ISO 1923:1995-06 Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981); German version EN ISO 1923:1995
- DIN EN ISO 29768:2022-12 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022); German version EN ISO 29768:2022
- DIN EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
- DIN ISO 2768-1:1991 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989
- DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
- DIN EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015); German version EN ISO 16012:2015
- DIN EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimen; German version EN 12085:2013
- DIN EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981); German version EN ISO 1923:1995
- DIN-Fachbericht ISO/TR 16570:2008 Geometrical product specifications - Linear dimensioning and tolerancing: ? limit deviations - Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004)
- DIN 52275-1:1977 Testing of mineral fibrous insulating materials; determination of linear dimensions and bulk density, plain products
- DIN EN ISO 14405-1:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016
- DIN EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear Sizes (ISO 14405-1:2010); German version EN ISO 14405-1:2010
- DIN EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011); German version EN ISO 14405-2:2011
YU-JUS, linear dimension
PL-PKN, linear dimension
- PN C89427-1992 Cellular plastics and rubbers. Determination of linear dimensions
- PN P04844-1971 Laces Determination of linear dimension change in washing
- PN P55506-1991 Bookbinding. Determination linear dimensions, squareness, thickness and pressing degree
- PN D04251-1988 Plywood Determination of linear diamensions changes after conditioning humid air
Standard Association of Australia （SAA）, linear dimension
Danish Standards Foundation, linear dimension
- DS/EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions
- DS/EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
- DS/EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
- DS/EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- DS/EN ISO 286-1/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
- DS/EN ISO 286-1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
未注明发布机构, linear dimension
KR-KS, linear dimension
- KS B ISO 14405-1-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
- KS B ISO 14405-2-2022 Geometrical Product Specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
- KS B ISO 14405-1-2022 Geometrical Product Specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
- KS B ISO 1938-1-2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
Professional Standard - Light Industry, linear dimension
- QB/T 4521-2013 Tolerances for watch linear dimensions up to 3 mm without individual tolerance indications
Lithuanian Standards Office , linear dimension
- LST EN 12085-1999 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- LST EN ISO 1923:2002 Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981)
- LST EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
- LST EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
AENOR, linear dimension
- UNE-EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- UNE-EN ISO 1923:1996 CELLULAR PLASTICS AND RUBBERS. DETERMINATION OF LINEAR DIMENSIONS. (IS0 1923:1981)
- UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
- UNE-EN ISO 14405-1:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
国家市场监督管理总局、中国国家标准化管理委员会, linear dimension
- GB/T 38762.1-2020 Geometrical product specifications (GPS)—Dimensional tolerancing—Part 1: Linear sizes
BELST, linear dimension
- STB 2178-2011 Textile materials. Definition method of linear dimensions after damp-heat treatment
- STB 2284-2012 Covers ends articles carpets machine finishing. Method definition change linear dimensions afterwards wetprocessing
American Society for Testing and Materials (ASTM), linear dimension
- ASTM F1087-02(2009) Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
- ASTM F1087-02 Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
- ASTM F1087-88(1997) Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
- ASTM F1087-02(2016) Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
- ASTM D1042-93 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
- ASTM D1042-01a Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
- ASTM D1042-01 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
- ASTM F1087-02(2023) Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
- ASTM D1042-06 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
- ASTM D1042-22 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
- ASTM D1042-12(2017) Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
- ASTM D1204-14(2020) Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-07 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-08 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-14 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-02 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1204-94e1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1042-12 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
BG-BDS, linear dimension
- BGC EN 441-3-2000 Refrigerated display cabinets - Part 3: Linear dimensions, areas and volumes
AT-ON, linear dimension
- OENORM EN ISO 29768:2021 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO/DIS 29768:2021)
CEN - European Committee for Standardization, linear dimension
- EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes
- PD CEN/TS 14159:2007 Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs@ runners@ carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
CU-NC, linear dimension
- NC 90-01-25-1984 Metrological Assurance. Linear Dimensions up to 500 mm. Measurement Permissible Maximum Errors
- NC 30-65-1987 Plastics Industry. Determination of Changes in Lineal Dimensions of. Thermoplastic Films by Temperature Elevation. Testing Methods
European Association of Aerospace Industries, linear dimension
IT-UNI, linear dimension