ZH
RU
ES

carbon

carbon, Total:217 items.

In the international standard classification, carbon involves: Refractories, Conducting materials, Materials for the reinforcement of composites, Construction materials, Occupational safety. Industrial hygiene, Fuels, Insulating fluids, Non-ferrous metals, Products of the chemical industry, Energy and heat transfer engineering in general, Terminology (principles and coordination), Environmental protection, Inorganic chemicals, Production of metals, Air quality, Iron and steel products, Graphic technology, Raw materials for rubber and plastics, Coals, Fluid storage devices, Equipment for the metallurgical industry, Ferroalloys, Vocabularies.

Professional Standard - Ferrous Metallurgy, carbon

YB/T 121-2014 Carbon mortars
YB/T 4301-2012 Carbon tamping paste for blast furnace
YB/T 4444-2014 Refractory bricks for carbon roaster
YB/T 4443-2014 Refractory mortars for carbon roaster
YB/T 5189-2007 The determination of volatile matter content in carbon material
YB/T 4384-2013 Carbon substrate for solar power generation
YB/T 4320-2012 Monolithic refractories for carbon baking furnace
YB 2009-1981 Titanium-containing high-quality carbon structural steel with low hardenability
YB/T 4467-2014 Technical specification of energy saving mass cooler of carbon pastes
YB/T 4468-2014 Technical specification of energy saving carbon kneader
YB/T 5147-2017 Determination of boron content in carbon materials Curcumin-oxalic acid colorimetric method
YB 4091-1992 Method for measuring true density of carbon materials (distilled water boiling method)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, carbon

GB/T 8718-2008 The terms of carbon materials
GB/T 1426-2008 The classifications of carbon materials
GB/T 1426-1978 Carbon materials--Classifications
GB/T 1427-2016 Sample method of carbon material
GB/T 1427-2000 Sample method of carbon material
GB/T 1428-1978 Determination of moisture content in carbon materials
GB/T 1430-1978 Determination of sulfur content in carbon materials
GB 15600-1995 Safety and health codes for carbon and graphite production
GB 15600-2008 Safety and health codes for carbon and graphite production
GB/T 9973-2006 Test method for permeability of carbon materials
GB/T 9973-1988 Test method for the permeability of carbon materials
GB/T 24525-2009 Method for determination of specific resistance of carbon materials
GB/T 24527-2009 Carbon materials-Determination moisture in air-dried sample
GB/T 6717-1986 Method for determination of specific resistance of carbon materials
GB/T 6155-1985 Carbon materials--Determination of the true density
GB/T 1431-1985 Carbon materials--Determination of the compressive strength
GB/T 6154-1985 Carbon materials--Determination of the bulk density
GB/T 8721-2009 Method for the determination of tensile strength of carbonaceous materials
GB/T 1431-2009 Carbon materials-Determination of the compressive strength
GB 21370-2008 The norm of energy consumption per unit product of carbon materials
GB/T 24526-2009 Carbon materials-Determination of the total sulphur content
GB/T 24528-2009 Carbon materials-Determination method of the bulk density
GB/T 8721-2019 The test method for tensile strength of carbon materials
GB/T 1429-1985 Carbon materials--Determination of the ash content
GB/T 8721-1988 Method for the determination of tensile strength of carbonaceous materials
GB/T 42670-2023 Method for determination of Rockwell hardness of carbon materials
GB/T 6156-1985 Carbon materials--Determination of the true porosity
GB/T 1429-2009 Carbon materials.Determination of the ash content
GB/T 24529-2009 Carbon materials-Determination of open porosity
GB/T 42671-2023 Test method for surface roughness of carbon materials
GB 25324-2022 The norm of energy consumption per unit throughput of carbonaceous materials used for aluminium production
GB/T 43111-2023 Axial force control method for fatigue testing of carbon materials
GB/T 26297.1-2010 Sampling of carbonaceous materials used for aluminium production.Part 1: Cathode blocks
GB/T 26297.2-2010 Sampling of carbonaceous materials used for aluminium production.Part 2: Sidewall blocks
GB/T 6155-2008 Carbon materials-Determination of the true density or porosity
GB/T 26297.4-2010 Sampling of carbonaceous materials used for aluminium production.Part 4: Cathodic pastes
GB/T 26297.5-2010 Sampling of carbonaceous materials used for aluminium production.Part 5：Pitch for electrodes
GB/T 7044-2003 Colour carbon black
GB/T 7044-2013 Colour carbon black
GB/T 24203-2009 Carbon materials.Determination of the true density or true poroous.Boiling method
GB/T 26297.3-2010 Sampling of carbonaceous materials used for aluminium production.Part 3：Prebaked blocks
GB/T 26297.6-2010 Sampling of carbonaceous materials used for aluminium production.Part 6：Cokes for electrodes
GB/T 26930.6-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 6:Determination of ash
GB/T 26930.8-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 8:Determination of coking value
GB/T 26930.11-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 11:Determination of dynamic viscosity
GB/T 26295-2010 Carbonaceous materials used in the production of aluminium.Prebaked anodes and cathode blocks.Determination of flexural strength by the four-point method
GB/T 26930.7-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 7:Determination of the softening point (Mettler softening point method)
GB/T 26930.10-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 10:Determination of sulful content by an instrumental method
GB/T 26930.12-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 12:Determination of volatile matter content
GB/T 26930.2-2011 Carbonaceous materials for the production of primary aluminium.Pitch for electrodes.Part 2: Determination of softening point by the ring and ball method
GB/T 26293-2010 Carbonaceous materials used in the production of aluminium.Cold and tepid ramming paste.Determination of rammability of unbaked paste
GB/T 26930.3-2011 Carbonaceous materials for the production of primary aluminium.Pitch for electrodes.Part 3: Determination of density.Pyknometric method
GB/T 26930.5-2011 Carbonaceous materials for the production of primary aluminium.Pitch for electrodes.Part 5: Determination of content of toluene-insoluble material
GB/T 26930.4-2011 Carbonaceous materials for the production of primary aluminium.Pitch for electrodes.Part 4: Determination of content of quinoline-insoluble material
GB/T 26930.9-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 9:Determination of sulful content by the bomb method
GB/T 8719-1997 General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products
GB/T 8719-2009 General rule for packing,marking,storage,transport and quality certificates of carbonaceous material and products
GB/T 8719-2022 General rule for packing,marking,storage,transport and quality certificates of carbonaceous material and products
GB/T 26930.1-2011 Carbonaceous materials for the production of primary aluminium.Pitch for electrodes.Part 1: Determination of water content.Azeotropic distillation(Dean and Stark) method
GB/T 7048-1993 Colour black—Determination of blackness
GB/T 7045-2003 Colour carbon black-Determination of pH value
GB/T 7047-1993 Colour black. Determination of blackness
GB/T 7048-2012 Colour carbon black.Determination of blackness
GB/T 7048-2003 Colour carbon black-Determination of blackness
GB/T 26930.13-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 13:Determination of C/H ratio in the quinoline-insoluble fraction

Professional Standard - Non-ferrous Metal, carbon

YSJ 012-1992 Code for process design of carbon product plant
YS/T 736-2010 Determination of the volatile matter content in carbon glue used for aluminium production
YS/T 131-2010 Furnaces energy consumption classification Standards for production of carbon products
YS/T 62-1993 Sampling method of carbon products for aluminum electrolysis
YS/T 735-2010 Determination of the ash content in carbon glue used for aluminium production
YS/T 758-2011 Straightness measuring method of rotary kiln for aluminium-carbon
YS/T 764-2011 Determination equipment for the thermal expansion coefficient of carbonaceous materials used in the production of aluminium
YS/T 64-1993 Method for determination of resistivity of carbon products for aluminum electrolysis
YS/T 62.1-2005 Carbonaceous materials used in the production of aluminium - Sampling methods - Part 1: Cathode blocks
YS/T 62.2-2005 Carbonaceous materials used in the production of aluminium - Sampling methods - Part 2: Sidewall blocks
YS/T 62.4-2005 Carbonaceous materials used in the production of aluminium - Sampling methods - Part 4: Cathodic pastes
YS/T 734-2010 Carbon materials used for aluminium production-Testing method for dust Blaine fineness
YS/T 62.3-2005 Carbonaceous materials used in the production of aluminium - Sampling methods - Part 3: Prebaked blocks
YS/T 124-1994 Determination and Calculation Method of Heat Balance of Furnace for Carbon Products Production
YS/T 63.20-2006 Carbonaceous materials used in the production of aluminium. Part 20:Determination of sulfur content
YS/T 701-2009 Carbonaceous materials and its products used in the production of aluminium.Packing,marking,transporting and storing
YS/T 63.20-2023 Carbonaceous materials used for the production of aluminium — Part 20:Determination of sulfur content
YS/T 63.17-2006 Carbonaceous materials used in the production of aluminium. Part 17:Determination of volatile matter content
YS/T 63.15-2006 Carbonaceous materials used in the production of aluminium. Part 15:Determination of compressive strength
YS/T 63.18-2006 Carbonaceous materials used in the production of aluminium. Part 18:Determination of water content
YS/T 63.19-2006 Carbonaceous materials used in the production of aluminium. Part 19:Determination of ash content
YS/T 63.15-2012 Carbonaceous materials used in the production of aluminium.Part 15:Determination of compressive strength
YS/T 63.19-2012 Carbonaceous materials used in the production of aluminium.Part 19:Determination of ash content
YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus
YS/T 63.15-2023 Carbonaceous materials used for the production of aluminium — Part 15:Determination of compressive strength
YS/T 63.4-2006 Carbonaceous materials used in the production of aluminium-Part 4:Determination of the thermal expansion coefficient
YS/T 63.10-2006 Carbonaceous materials used in the production of aluminium. Part 10:Determination of the air permeability
YS/T 63.10-2012 Carbonaceous materials used in the production of aluminium.Part 10:Determination of the air permeability
YS/T 63.2-2023 Carbonaceous materials used for the production of aluminium— Part 2：Determination of electrical resistivity at ambient temperature
YS/T 63.4-2023 Carbonaceous materials used for the production of aluminium — Part 4:Determination of the thermal expansion coefficient
YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method
YS/T 664-2007 Determination and calculation of heat balance of special equipments for carbon production.Heating medium furnace
YS/T 63.7-2006 Carbonaceous materials used in the production of aluminium-Part 7:Determination of apparent density using a dimensions method
YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
YS/T 63.13-2006 Carbonaceous materials used in the production of aluminium-Part 13:Determination of young's modulus-Statical modulus method
YS/T 63.8-2023 Carbonaceous materials used for the production of aluminium — Part 8:Determination of truth density — Pyknometric method
YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method
YS/T 63.5-2006 Carbonaceous materials used in the production of aluminium-Part 5:Cathode blocks-Determination of expansion due to sodium penetration with application of pressure
YS/T 63.25-2012 Carbonaceous materials used in the production of aluminium.Part 25:Cathode blocks.Determination of expansion due to sodium penetration without application of pressure
YS/T 63.9-2006 Carbonaceous materials used in the production of aluminium. Part 9:Determination of truth density by helium pyknometry method
YS/T 124.4-2010 Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 4:Calcinator
YS/T 124.1-2010 Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 1:Gyration cave
YS/T 63.9-2012 Carbonaceous materials used in the production of aluminium.Part 9:Determination of truth density by helium pyknometry method
YS/T 63.22-2009 Carbonaceous materials used in the production of aluminium.Part 22:Determination of baking level expressed by equivalent temperature
YS/T 63.6-2006 Carbonaceous materials used in the production of aluminium-Part 6:Determination of open porosity using a hydrostatic method
YS/T 63.8-2006 Carbonaceous materials used in the production of aluminium-Part 8:Determination of the density in xylene by a pyknometric method
YS/T 63.11-2006 Carbonaceous materials used in the production of aluminium-Part 11:Sidewall blocks and prebaked anodes-Determination of the reactivity to air-Loss in mass method
YS/T 63.21-2007 Carbonaceous materials used in the production of aluminium. Part 21: Cathodic pastes. Determination of expansion/shrinkage during baking
YS/T 124.2-2010 Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 2:Pot-type calciner
YS/T 124.3-2010 Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 3:Electric calciner
YS/T 63.2-2006 Carbonaceous materials used in the production of aluminium-Part 2: Cathode blocks and prebaked anodes-Determination of electrical resistivity at ambient temperature
YS/T 124.5-2010 Methods of determination and calculation of heat balance in metallurgical furnaces for production of carbon products- Part 5:Greying resistance furnace
YS/T 63.23-2012 Carbonaceous materials used in the production of aluminium.Part 23:Baked anodes.Determination of the reactivity to air.Thermogravimetric method
YS/T 63.26-2012 Carbonaceous materials used in the production of aluminium.Part 26:Dense refractory bricks.Determination of cryolite resistance
YS/T 63.16-2006 Carbonaceous materials used in the production of aluminium-Part 16:Analysis using an X-ray fluorescence method

工业和信息化部, carbon

YB/T 5189-2022 Determination of volatile matter of carbon materials
YB/T 5288-2022 Test methods for corrosion resistance of carbon materials
XB/T 905-2020 Carbon anode for rare earth molten salt electrolysis
YB/T 4994-2022 Test method for bending properties of carbon materials
YB/T 6045-2022 Method for determination of microstructure of carbon materials
YB/T 6008-2022 Technical specifications for energy conservation monitoring in the carbon industry
YS/T 1421-2021 Test method for energy consumption of carbon roasting for aluminum
YB/T 6044-2022 Method for determination of thermal resistivity of carbon materials
YS/T 1422-2021 Technical Specifications for Flue Gas Denitrification in the Aluminum Carbon Industry
YS/T 1398-2020 Technical specification for utilization of waste heat from carbon production for aluminum
YB/T 4993-2022 Test methods for friction and wear properties of carbon materials
YB/T 4814-2020 Technical Specifications for Energy Saving in Graphitization Process of Carbon Enterprises
YB/T 4813-2020 Technical specifications for energy saving in the kneading and molding process of carbon enterprises
YB/T 917-2017 Determination of vanadium content in carbon materials using 3,3-dimethylbinaphthylamine colorimetric method
YS/T 63.17-2019 Testing methods for carbon materials used in aluminum - Part 17: Determination of volatile matter
YS/T 63.19-2021 Testing methods for carbon materials for aluminum use Part 19: Determination of ash content
YS/T 63.6-2019 Testing methods for carbon materials for aluminum use Part 6: Determination of open porosity
YS/T 63.3-2016 Testing methods for carbon materials for aluminum use Part 3: Comparative method for determination of thermal conductivity
YS/T 63.27-2015 Testing methods for carbon materials for aluminum use Part 27: Determination of fracture energy of prebaked anodes

国家市场监督管理总局、中国国家标准化管理委员会, carbon

GB/T 24521-2018 Method for the determination of specific resistance of carbon raw materials and coke
GB/T 8722-2019 Test method for thermal conductivity of carbon materials
GB/T 1431-2019 The test method for compressive strength of carbon materials
GB/T 38338-2019 Test method for fracture toughness of carbon materials
GB/T 3074.1-2021 The test method for flexural strength of carbon materials
GB/T 39535-2020 Test method for shore hardness of carbon materials
GB/T 37588-2019 Carbon materials—Determination of nitrogen content—Dumas combustion method
GB/T 7044-2022 Colour carbon black
GB/T 40398.2-2021 Test method for C-C composites—Part 2: Flexural properties
GB/T 40398.1-2021 Test method for C-C composites—Part 1: Friction and wear property
GB/T 40406-2021 Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, carbon

GB 21370-2017 The norm of energy consumption per unit carbon product materials
GB/T 33018.1-2016 Energy-saving technical specification for carbon enterprise—Part 1: Impregnation
GB/T 33018.3-2016 Energy-saving technical specification for carbon enterprise—Part 3: Machining
GB/T 33018.2-2016 Energy-saving technical specification for carbon enterprise—Part 2: Baking furnace

Group Standards of the People's Republic of China, carbon

T/YNBX 096-2023 Aluminum electrolysis overhaul slag regenerated carbon material
T/ZGTS 001-2019 Emission standards of air pollutants for carbon industry
T/CNIA 0027-2019 Technical specifications for dust removal equipment for carbon production
T/CNIA 0028-2019 Technical specifications for electric capture equipment for carbon production
T/ZGTS 003-2021 Calculation method of carbon dioxide emissions from carbon products manufacture
T/CI 092-2022 Technical specification for emission reduction of aluminum-carbon pollutants and flue gas quantity

German Institute for Standardization, carbon

DIN 51904:1981 Testing of carbon materials; determination of water content; solid matters
DIN 51903:1981 Testing of carbon materials; determination of ash value; solid matters
DIN 51904:2012 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN 51903:2012-11 Testing of carbonaceous materials - Determination of ash value - Solid materials
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51901:1980 Testing of carbon materials; determination of density by the xylene method, solid matters
DIN 51930:2006 Testing of carbonaceous materials - Preparation of extruded samples of calcinated cokes - Solid materials
DIN 51906:1981 Testing of carbon materials; determination of matter insoluble in toluene; binding and impregnating materials
DIN 51922:1983 Testing of carbon materials; determination of ash value; binding and impregnating materials
DIN 51922:2016 Testing of carbonaceous materials - Determination of ash value - Binding and impregnating materials
DIN 51901:2006 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
DIN 51934:1990 Testing of carbon materials; determination of velocity of sound of shaped articles; solid materials
DIN 51905:2014 Testing of carbonaceous materials - Determination of coking value - Binding and impregnating materials
DIN 51908:2006-05 Testing of carbon materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
DIN 51905:1981 Testing of carbon materials; determination of coking value; binding and impregnating materials
DIN 51932:1998 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN 51920:2012 Testing of carbonaceous materials.Determination of the Mettler softening point.Binding and impregnating materials
DIN 51906:2014 Testing of carbonaceous materials - Determination of matter insoluble in toluene - Binding and impregnating materials
DIN 51920:1984 Testing of carbon materials; determination of the Mettler softening point; binding and impregnating materials
DIN 51907:1997 Testing of carbon materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN 51907:2012 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN 51921:2014 Testing of carbonaceous materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials
DIN 51936:2008 Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials
DIN 51919:2013 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51936:2016 Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials
DIN 51942:2002 Testing of carbonaceous materials - Determination of dynamic modulus of elasticity by pulse excitation - Solid materials
DIN 51933:1990 Testing of carbon materials; determination of content of dedusting substances in cokes by extraction; solid materials
DIN 51936:1994 Testing of carbon materials; determination of thermal diffusity at high temperatures by the laser pulse method; solid materials
DIN 51921:1998 Testing of carbon materials - Determination of content of matter insoluble in quinoline - Binding and impregnating materials
DIN 51935:1993 Testing of carbon materials; determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas; solid matters

中华人民共和国国家卫生和计划生育委员会, carbon

GB 18073-2000 Health protection zone standard for charcoal electrode plant

Japanese Industrial Standards Committee (JISC), carbon

JIS G 3118 ERRATUM 1:2001 Carbon steel plates for pressure vessels for intermediate and moderate temperature service (Erratum 1)

Henan Provincial Standard of the People's Republic of China, carbon

DB41/T 2085-2020 Technical specification for prevention and control of waste gas pollution in carbon industry

Professional Standard - Press and Publication, carbon

CY/T 10-1994 Carbon paper gravure plate making technical requirements and inspection methods

UNKNOWN, carbon

YB 4091-92

Professional Standard - Agriculture, carbon

SN/T 5579-2023 Determination of degree of graphitization of carbon materials X-ray diffraction method

International Organization for Standardization (ISO), carbon

ISO 17247:2020 Coal and coke — Ultimate analysis

Professional Standard - Aviation, carbon

HB 3-56-1983 Specifications for cylindrical helical compression and tension springs made of carbon alloy steel wire
HB/Z 18-1983 Instructional Technical Documents for the Design and Manufacture of Carbon and Alloy Steel Wire Cylindrical Helical Compression and Tension Springs

British Standards Institution (BSI), carbon

BS ISO 18142:2014 Carbonaceous materials for the production of primary aluminium. Baked carbon bodies. Determination of the dynamic elasticity modulus by the resonance method
BS EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
BS 6043-4.0:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - General introduction

European Committee for Standardization (CEN), carbon

EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders

Professional Standard - Environmental Protection, carbon

HJ 254-2021 Technical specifications for acceptance of environmental protection facilities after completion of construction projects Electrolytic aluminum and aluminum carbon industry

American Society for Testing and Materials (ASTM), carbon

ASTM D3176-89(2002) Standard Practice for Ultimate Analysis of Coal and Coke