ZH
RU
ES
Piping and Test Piping for Flow Meters
Piping and Test Piping for Flow Meters, Total:240 items.
In the international standard classification, Piping and Test Piping for Flow Meters involves: Measurement of fluid flow, Installations in buildings, Ergonomics, Environmental protection, Linear and angular measurements, Medical equipment, Acoustics and acoustic measurements, Aerospace fluid systems and components, Air quality, Vocabularies, Pipeline components and pipelines, Protection of and in buildings, Petroleum, petroleum products and natural gas handling equipment, Organic chemicals, Equipment for petroleum and natural gas industries, Road engineering, Waxes, bituminous materials and other petroleum products, Fluid storage devices, Products of non-ferrous metals, Water quality, Electronic tubes.
International Organization for Standardization (ISO), Piping and Test Piping for Flow Meters
- ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- ISO 14511:2001 Measurement of fluid flow in closed conduits - Thermal mass flowmeters
- ISO 14511:2019 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- ISO 9951:1993 Measurement of glas flow in closed conduits; turbine meters
- ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- ISO 10790:1994 Measurement of fluid flow in closed conduits — Coriolis mass flowmeters
- ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
- ISO/TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
- ISO/TR 3313:2018 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
- ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
- ISO/DIS 24062 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
- ISO/FDIS 24062:2023 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
- ISO/TR 12765:1998 Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
- ISO 9104:1991 Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids
- ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
- ISO 6817:1992 Measurement of conductive liquid flow in closed conduits; method using electromagnetic flowmeters
- ISO 7858-1:1985 Measurement of water flow in closed conduits; Meters for cold potable water; Combination meters; Part 1 : Specifications
- ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
- ISO 4064-3:1983 Measurement of water flow in closed conduits; Meters for cold potable water; Part 3 : Test methods and equipment
- ISO 7858-2:1987 Measurement of water flow in closed conduits; Meters for cold potable water; Combination meters; Part 2 : Installation requirements
- ISO 17089-1:2019 Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement
- ISO 4064-2:1978 Measurement of water flow in closed conduits; Meters for cold potable water; Part II : Installation requirements
- ISO 3354:1988 Measurement of clean water flow in closed conduits; velocity-area method using current-meters in full conduits and under regular flow conditions
- ISO 17089-2:2012 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 2: Meters for industrial applications
- ISO 7145:1982 Determination of flowrate of fluids in closed conduits of circular cross-section; Method of velocity measurement at one point of the cross-section
- ISO 5167-5:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
- ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
- ISO 10790:1999 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1: Meters for custody transfer and allocation measurement
- ISO 8316:1987 Measurement of liquid flow in closed conduits; Method by collection of the liquid in a volumetric tank
- ISO/DTS 24399 Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing
- ISO 4064-3:1999 Measurement of water flow in closed conduits - Meters for cold potable water - Part 3: Test methods and equipment
- ISO 7858-3:1992 Measurement of water flow in closed conduits; meters for cold potable water; combination meters; part 3: test methods
- ISO/DTS 22499 Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
- ISO 4064-3:2005 Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and equipment
- ISO 11515:2013 Gas cylinders.Refillable composite reinforced tubes of water capacity between 450L and 3000L.Design, construction and testing
- ISO/DIS 7661:2023 Aerospace Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing (Metric series)
- ISO 18488:2015 Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth - Test method
- ISO 9809-2:2019 Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or eq
Korean Agency for Technology and Standards (KATS), Piping and Test Piping for Flow Meters
- KS B ISO TR 3313-2014(2019) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
- KS B ISO 14511-2014(2019) Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- KS B ISO 14511:2004 Measurement of fluid flow in closed conduits-Thermal mass flowmeters
- KS B ISO 14511:2014 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- KS E ISO 7194-1:2003 Measurement of fluid flow in closed conduits Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- KS B ISO TR 3313:2004 Measurement of fluid flow in closed conduits-Guidelines on the effects of flow pulsations on flow-measurement instruments
- KS B ISO TR 3313:2014 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
- KS B ISO TR 12764:2004 Measurement of fluid flow in closed conduits-Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- KS B ISO TR 12764:2014 Measurement of fluid flow in closed conduits-Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- KS B ISO TR 12764:2015 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- KS B ISO TR 12765-2005(2020) Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
- KS E ISO 7194-1:2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
- KS B ISO 13359:2014 Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
- KS B ISO 13359:2004 Measurement of conductive liquid flow in closed conduits-Flanged electromagnetic flowmeters-Overall length
- KS B ISO TR 12765:2005 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
- KS B ISO 4064-1:2002 Measurement of water flow in closed conduits－Meters for cold potable water－Part 1：Specifications
- KS B ISO 7858-1:2004 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 1:Specifications
- KS B ISO 7858-1:2014 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 1:Specifications
- KS B ISO 7858-1:2015 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications
- KS M ISO 1167-2-2014(2019) Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
- KS B ISO 10790:2003 Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- KS M ISO 10147-2016(2021) Pipes and fittings made of crosslinked polyethylene (PE-X)－ Estimation of the degree of crosslinking by determination of the gel content
- KS B ISO 7858-2:2014 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 2:Installation requirements
- KS B ISO 7858-2:2004 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 2:Installation requirements
- KS B ISO 7858-2:2015 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements
- KS B ISO 4064-2:2002 Measurement of water flow in closed conduits－Meters for cold potable water－Part 2：Installation requirements and selection
- KS M ISO 7278-4:2003 Liquid hydrocarbons－Dynamic measurement－Proving systems for volumetric meters－Part 4：Guide for operators of pipe provers
- KS B ISO 9368-1:2014 Measurement of liquid flow in closed conduits by the weighing method — Procedures for checking installations — Part 1: Static weighing systems
- KS B ISO 9368-1:2004 Measurment of liquid flow in closed conduits by the weighing method-Procedures for checking installations-Part 1:Static weighing systems
- KS B ISO 7858-3:2004 Measurement of water flow in closed conduits-Meters for cold potable water-Combination meters-Part 3:Test methods
- KS B ISO 7858-3:2014 Measurement of water flow in closed conduits-Meters for cold potable water-Combination meters-Part 3:Test methods
- KS B ISO 7858-3:2015 Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods
American Society of Mechanical Engineers (ASME), Piping and Test Piping for Flow Meters
American National Standards Institute （ANSI), Piping and Test Piping for Flow Meters
British Standards Institution (BSI), Piping and Test Piping for Flow Meters
- BS 7834:1995 Specification for turbine meters used for the measurement of gas flow in closed conduits
- BS ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes
- BS PD ISO/TR 3313:2018 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
- BS ISO 14511:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Thermal mass flowmeters
- BS ISO 12764:2017 Tracked Changes. Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- BS ISO TR 12764:1997 Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- BS ISO TR 12764:1998 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- BS ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
- BS ISO TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
- BS ISO/TR 12765:1998 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
- PD ISO/TR 3313:2018 Tracked Changes. Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
- BS ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
- BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
- BS 1042 Sec.2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods. Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- BS EN ISO 15002:2008+A1:2019 Flow-metering devices for connection to terminal units of medical gas pipeline systems
- 23/30456713 DC BS ISO 24062. Measurement of fluid flow in closed conduits. Clamp-on ultrasonic transit-time meters for liquids and gases
- PD ISO/TS 16479:2012 Thermoplastics pipes for the conveyance of fluids. Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
- BS ISO/TR 12765:1999 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
- BS EN ISO 8316:1988 Method of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
- 16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
- 22/30378715 DC BS EN ISO 15002. Flow-metering devices for connection to terminal units of medical gas pipeline systems
- BS M 62:1987 Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment. Metric series
- BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
- 20/30378712 DC BS EN ISO 15002 AMD2. Flow-metering devices for connection to terminal units of medical gas pipeline system
- BS ISO 10790:1999 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- BS 1042 Sec.2.4:1989 Measurement of fluid flow in closed conduits. Velocity-area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
- BS ISO 17089-1:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement
- 22/30414914 DC BS ISO 9854-2. Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Part 2. Test conditions for pipes of various materials
- 23/30470178 DC BS ISO 9854-2.2. Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Part 2. Test conditions for pipes of various materials
- BS ISO 9854-1:2023 Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties. General test method
- BS ISO 9854-2:2023 Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Test conditions for pipes of various materials
- BS 2782-11 Method 1121H:1996 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses
- 21/30444617 DC BS EN ISO 5167-6. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Part 6. Wedge meters
- 21/30444613 DC BS EN ISO 5167-5. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Part 5. Cone meters
- BS 2782-11 Method 1121C:1997 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
- 22/30414911 DC BS ISO 9854-1. Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - General test method
- 20/30383758 DC BS EN ISO 13479. Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes
- BS ISO 11515:2013 Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing
- BS ISO 18488:2015 Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method
- BS ISO 11119-2:2020+A1:2023 Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes - Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
- BS 6920-2.2.3:2000+A2:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water.Methods of test.Odour and flavour of water.Method of testing tastes imparted to water by hoses for convey
KR-KS, Piping and Test Piping for Flow Meters
- KS E ISO 7194-1-2018(2023) Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
- KS E ISO 7194-1-2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
- KS B ISO TS 15769-2014 Hydrometric determinations — Liquid flow in open channels and partly filled pipes — Guidelines for the application of Doppler-based flow measurements
- KS B ISO 10790-2003(2023) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- KS B ISO 7858-2-2014 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements
- KS B ISO 7858-3-2014 Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Piping and Test Piping for Flow Meters
- GB/T 18940-2003 Measurement of gas flow in closed conduits--Turbine meters
- GB/T 25922-2023 Measurement of fluid flow in closed pipes The flow is measured with a vortex flowmeter installed in a pipe of circular cross-section filled with fluid
- GB/T 20727-2006 Measurement of fluid flow in closed conduits Thermal mass flowmeters
- GB/T 25922-2010 Measurement of fluid flow in closed conduits.Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- GB/T 18659-2023 Guidelines for the use of electromagnetic flowmeters for measuring fluid flow in closed pipes
- GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters
- GB/T 18659-2002 Measurement of fluid flow in closed conduits--Methods of evaluating the performance of electromagnetic flow-meters for liquids
- GB/T 20728-2006 Measurement of fluid flow in closed conduits Guidance to the selection installation and use of Coriolis meters
- GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length
- GB/T 778.3-2007 Measurement of water flow in fully charged closed conduits.Meters for cold potable water and got water.Part 3:Test methods and equipment
Association Francaise de Normalisation, Piping and Test Piping for Flow Meters
- NF X10-111:1988 Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions.
- NF X10-120:1995 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flow meters.
- NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
- NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
- NF X10-121:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.
- NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
- NF X10-102-5*NF EN ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5 : cone meters
- NF ISO 7661:1987 Aéronautique et espace - Systèmes de fluides - Peignes supports de tuyauteries à alignement axial - Conception et essais de qualification - Série métrique
- NF EN ISO 5167-6:2022 Mesurage de débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire - Partie 6 : débitmètres à coin
- NF EN 17694-2:2023 Hydrométrie - Exigences minimales de performance et modes opératoires d'essai pour les équipements de surveillance de l'eau - Dispositifs de mesure de l'écoulement - Partie 2 : instruments de mesure pour écoulements en conduite fermée
- NF S31-610*NF EN ISO 11691:2020 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method
- NF S31-610:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method.
- NF P98-260-1:1992 TEST RELATING TO PAVEMENTS. MEASUREMENT OF RHEOLOGICAL PROPERTIES ON BITUMINOUS MIXTURES. PART 1 : DETERMINATION OF MODULUS AND NON-LINEARITY BEHAVIOUR USING TENSILE TEST.
未注明发布机构, Piping and Test Piping for Flow Meters
- BS ISO/TR 12764:1997(1999) Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross - section conduits running full
- BS ISO/TR 3313:1998(1999) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow - measurement instruments
- BS 7405:1991(2000) Guide to Selection and application of flowmeters for the measurement of fluid flow in closed conduits
- BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
- BS ISO 13359:1998(1999) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Piping and Test Piping for Flow Meters
- ASHRAE 4841-2006 The Effect of Elbows on the Accuracy of Liquid Flow Measurement with an Insertion Flowmeter
- ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters
ESDU - Engineering Sciences Data Unit, Piping and Test Piping for Flow Meters
- ESDU 93031-1994 PIPELINE VIBRATIONS Computer program for the prediction of fluid transients in flexible@ unbranched three-dimensional piping systems
- ESDU 93031 A-2007 Pipeline vibrations. Computer program for the prediction of fluid transients in flexible@ unbranched three-dimensional piping systems.
- ESDU 93031 A-2011 Pipeline vibrations. Computer program for the prediction of fluid transients in flexible@ unbranched three-dimensional piping systems
BE-NBN, Piping and Test Piping for Flow Meters
Standard Association of Australia （SAA）, Piping and Test Piping for Flow Meters
- AS 2360.1.2:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates or nozzles - Conduits with diameters less than 50 mm
- AS ISO 5167.5:2023 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full, Part 5: Cone meters
- AS ISO 5167.6:2023 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full, Part 6: Wedge meters
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Piping and Test Piping for Flow Meters
- GB/T 35138-2017 Measurement of fluid flow in closed conduits—Ultrasonic transit-time meters for liquid
- GB/T 34041.2-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 2: Meters for industrial applications
- GB/T 34041.1-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 1: Meters for custody transfer and allocation measurement
TR-TSE, Piping and Test Piping for Flow Meters
- TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters
VN-TCVN, Piping and Test Piping for Flow Meters
- TCVN 6816-2001 Measurement of fluid flow in closed conduits.Methods using transit-time ultrasonic flowmeters
Danish Standards Foundation, Piping and Test Piping for Flow Meters
- DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
- DS/EN 29104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
- DS/ISO 9104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
- DS/EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
- DS/EN 12308:1999 Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
- DS/EN ISO 7278-2:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
- DS/ISO 16241:2006 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
German Institute for Standardization, Piping and Test Piping for Flow Meters
- DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
- DIN EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008); English version of DIN EN ISO 15002:2008-11
- DIN EN ISO 15002:2020-05 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008 + Amd.1:2018); German version EN ISO 15002:2008 + A1:2019 / Note: To be replaced by DIN EN ISO 15002 (2022-07).
- DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
- DIN EN ISO 15002/A2:2020-02 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008/DAM 2:2019); German and English version EN ISO 15002:2008/prA2:2019 / Note: Date of issue 2020-01-10*Intended as an amendment to DIN EN ISO 15002 (20...
- DIN EN ISO 5167-5:2023-08 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2022); German version EN ISO 5167-5:2022
- DIN EN ISO 5167-6:2023-08 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2022); German version EN ISO 5167-6:2022
- DIN 54141-2:1982 Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
- DIN EN ISO 15002:2020 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008 + Amd.1:2018) (includes Amendment :2019)
- DIN EN 17694-2:2021-10 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 2: Closed conduit instrumentation; German and English version prEN 17694-2:2021 / Note: Date of issue 2021-09-10
- DIN ISO 9368-1:1993-05 Measurement of liquid flow in closed conduits by the weighing method; procedures for checking installations; static weighing systems; identical with ISO 9368-1:1990
ES-UNE, Piping and Test Piping for Flow Meters
- UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
- UNE-EN ISO 15002:2008/A1:2020 Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 1 (ISO 15002:2008/Amd 1:2018)
- UNE-EN ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016)
- UNE-EN ISO 5167-6:2021 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2019)
- UNE-EN ISO 5167-5:2023 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2022)
- UNE-EN 17694-2:2023 Hydrometry - Minimum performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 2: Closed conduit instrumentation (Endorsed by Asociación Española de Normalización in June of 2023.)
European Committee for Standardization (CEN), Piping and Test Piping for Flow Meters
- EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
- EN ISO 6817:1995 Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters ISO 6817: 1992
- EN ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2022)
- EN 13220:1998 Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems Ratified European Text
- CEN EN 13220-1998 Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems Ratified European Text
- EN ISO 8316:1995 Measurement of Liquid Flow in Closed Conduits - Method by Collection of the Liquid in a Volumetric Tank ISO 8316: 1987
- prEN 17694-2-2021 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 2: Closed conduit instrumentation
- EN 1971-2:2011 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
American Society for Testing and Materials (ASTM), Piping and Test Piping for Flow Meters
- ASTM D5243-92(2007) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
- ASTM E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
- ASTM E477-13e1 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- ASTM E477-20 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- ASTM E2029-99(2004) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
- ASTM E2029-99 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
- ASTM E202-09 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
- ASTM E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
- ASTM F3058-16(2021) Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
- ASTM F3058-16 Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
- ASTM E477-13 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Piping and Test Piping for Flow Meters
- ASHRAE TO-98-17-1-1998 Comparsion of a Duct System Computer Model with Measured Data in a Residential Attic with a Duct System
- ASHRAE CH-03-6-2003 Symposium on Current Issues in Duct Design@ Construction@ and Airflow Measurement
- ASHRAE 4447-2001 The Nulling Test: A New Measurement Technique for Estimating Duct Leakage in Residential Homes
NL-NEN, Piping and Test Piping for Flow Meters
- NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
Lithuanian Standards Office , Piping and Test Piping for Flow Meters
- LST EN 29104-2001 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
- LST EN ISO 6817:2001 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
- LST ISO 14164:2001 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method (identical ISO 14164:1999)
- LST EN 12308-2001 Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
国家市场监督管理总局、中国国家标准化管理委员会, Piping and Test Piping for Flow Meters
- GB/T 20728-2021 Measurement of fluid flow in closed conduits—Guidance to the selection, installation and use of Coriolis flowmeters
AENOR, Piping and Test Piping for Flow Meters
- UNE-EN 29104:1996 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS. METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS. (ISO 9104:1991).
- UNE-EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS. METHOD USING ELECTROMAGNETIC FLOWMETERS. (ISO 6817:1992).
PL-PKN, Piping and Test Piping for Flow Meters
- PN B02711-1990 Canalisation Continuing measurements of volumetric rate of flow in non pressure sewerage pipes Desing principles
AT-ON, Piping and Test Piping for Flow Meters
- ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)
RU-GOST R, Piping and Test Piping for Flow Meters
- GOST R 52799-2007 Noise. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
- GOST 21106.6-1977 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Measurement methods of currents of anode and grids, having positive voltage relative to cathode and zero anode and grids currents
HU-MSZT, Piping and Test Piping for Flow Meters
Indonesia Standards, Piping and Test Piping for Flow Meters
- SNI ISO 7278-2:2011 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
- SNI ISO 7278-4:2011 Liquid hydrocarbons – Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers
RO-ASRO, Piping and Test Piping for Flow Meters
- STAS SR ISO 7858-3:1996 Measurement of water flow in closed conduits Meters for cold potable water - Combination meters Part 3: Test methods
- SR ISO 4064-3:1996 Measurement of water flow in closed conduits - Meters for cold potable water - Part 3: Test methods and equipment
GOSTR, Piping and Test Piping for Flow Meters
- GOST ISO 10619-2-2020 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Part 2. Bending test at sub-ambient temperatures
BELST, Piping and Test Piping for Flow Meters
- STB 8064-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Diaphragms mounted on pipelines to determine liquids and gases flow and quantity. Methods of verification