ZH
RU
ES

Metal oxides and detection

Metal oxides and detection, Total:500 items.

In the international standard classification, Metal oxides and detection involves: Power transmission and distribution networks, Non-metalliferous minerals, Non-ferrous metals, Insulation, Surface treatment and coating, Non-destructive testing, Corrosion of metals, Linear and angular measurements, Electronic components in general, Refractories, Semiconductor devices, Electrical and electronic testing, Air quality, Integrated circuits. Microelectronics, Metalliferous minerals, Powder metallurgy, Thermodynamics and temperature measurements, Products of the chemical industry, Analytical chemistry, Insulating materials, Microbiology, Testing of metals, Products of the textile industry, Protection against dangerous goods, Fluid storage devices, Nuclear energy engineering, Physics. Chemistry, Vocabularies, Materials for aerospace construction, Edible oils and fats. Oilseeds, Road vehicle systems, Plastics, Resistors, Heat treatment, Ferrous metals, Fuels, Ferroalloys, Soil quality. Pedology, Electricity. Magnetism. Electrical and magnetic measurements, Alarm and warning systems, Petroleum products in general, Wastes, Animal feeding stuffs, Water quality, Organic chemicals, Electrical wires and cables, Railway rolling stock, Ceramics.


Professional Standard - Electricity, Metal oxides and detection

  • DL/T 1702-2017 Guidelines for Condition Maintenance of Metal Oxide Surge Arresters
  • DL/T 821-2017 Radiographic Inspection Technology and Quality Grading of Metal Fusion Welded Butt Joints
  • DL/T 1432.3-2016 Testing specification for on-line monitoring device of transformation equipment.Part 3: On-line insulation monitoring device of capacitive equipment and metal-oxide surge arrester

CN-QIYE, Metal oxides and detection

  • Q/GDW 453-2010 Guidelines for Condition Maintenance of Metal Oxide Surge Arresters

RU-GOST R, Metal oxides and detection

  • GOST 26318.6-1984 Non-metallic ore materials. Methods for determination of calcium oxide and magnesium oxide mass fractions
  • GOST 26318.7-1984 Non-metallic ore materials. Method for determination of potassium oxide and sodium oxide mass fractions
  • GOST 23862.28-1979 Rare-earth metals and their oxides. Method of determination of molybdenum and tungsten
  • GOST 23862.19-1979 Rare-earth metals and their oxides. Method of determination of titanium
  • GOST 23862.20-1979 Rare-earth metals and their oxides. Method of determination of vanadium
  • GOST 23862.23-1979 Rare-earth metals and their oxides. Methods of determination of manganese
  • GOST 23862.24-1979 Rare-earth metals and their oxides. Methods of determination of iron and copper
  • GOST 23862.25-1979 Rare-earth metals and their oxides. Methods of determination of cobalt and nickel
  • GOST 23862.26-1979 Rare-earth metals and their oxides. Methods of determination of nickel
  • GOST 23862.27-1979 Rare-earth metals and their oxides. Method of determination of niobium
  • GOST 23862.29-1979 Rare-earth metals and their oxides. Method of determination of molybdenum
  • GOST 23862.30-1979 Rare-earth metals and their oxides. Method of determination of tantalum
  • GOST 23862.31-1979 Rare-earth metals and their oxides. Methods of determination of thorium and praseodymium
  • GOST 23862.32-1979 Rare-earth metals and their oxides. Methods of determination of fluorine
  • GOST 23862.33-1979 Rare-earth metals and their oxides. Method of determination of silicon
  • GOST 23862.34-1979 Rare-earth metals and their oxides. Method of determination of phosphorus
  • GOST 23862.35-1979 Rare-earth metals and their oxides. Methods of determination of sulphur, zinc, cerium and europium
  • GOST 23862.36-1979 Rare-earth metals and their oxides. Methods of determination of chlorine
  • GOST 23862.1-1979 Rare-earth metals and their oxides. Spectral method of determination of impurities in oxides of rare-earth elements
  • GOST 23862.2-1979 Rare-earth metals and their oxides. Direct spectral method of determination of impurities in oxides of rare-earth elements
  • GOST 23862.7-1979 Rare-earth metals and their oxides. Chemical-spectral methods of determination of impurities in oxides of rare-earth elements
  • GOST 23862.6-1979 Rare-earth metals and their oxides. Methods of determination of sodium, potassium and calcium
  • GOST 26318.3-1984 Non-metallic ore materials. Methods for determination of iron oxide mass fraction
  • GOST 26318.2-1984 Non-metallic ore materials. Method for determination of silica mass fraction
  • GOST 26318.5-1984 Non-metallic ore materials. Methods for determination of titanium dioxide mass fraction
  • GOST 26318.9-1984 Non-metallic ore materials. Method for determination of sulphir mass fraction
  • GOST 26318.4-1984 Non-metallic ore materials. Methods for determination of alumina mass fraction
  • GOST 26318.10-1984 Non-metallic ore materials. Method for determination of phosphorus pentoxide mass fraction
  • GOST 23862.11-1979 Rare-earth metals and their oxides. Chemical-spectral method of determination of impurities of vanadium, iron, cobalt, manganese, copper, nickel
  • GOST 25702.9-1983 Raremetallic concentrates. Method for the determination of sum of niobium and tantalium pentoxide
  • GOST 30550-1998 Metallic of powders. Determination of acid-insoluble content in iron, copper, tin and bronze powders
  • GOST 23862.4-1979 Rare-earth metals and their oxides. Spectral method of determination of vanadium, iron, cobalt, silicon, manganese, copper, nickel, lead, titanium, chromium
  • GOST ISO 21149-2013 Perfume and cosmetic products. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
  • GOST R 9.907-2007 Unified system of corrosion and ageing protection. Metals, alloys, metallic coatings. Methods for removal of corrosion products after corrosion tests
  • GOST EN 1601-2012 Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography method using the oxygen flame-ionization detector (O-FID)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal oxides and detection

  • GB/T 12690.3-1990 Cerium and cerium oxide--Determination of lanthanum oxide, praseodymium oxide, neodymium oxide, samarium oxide and yttrium oxide contents--Emission spectrographic method
  • GB/T 12690.8-1990 Neodymium and neodymium oxide--Determination of lanthanum oxide, cerium oxide, praseodymium oxide, samarium oxide and yttrium oxide contents--Emission spectrographic method
  • GB/T 12690.7-1990 Neodymium and neodymium oxide--Determination of lanthanum oxide, cerium oxide, praseodymium oxide, samarium oxide, yttrium oxide contents--X-ray fluorescence spectrometric method
  • GB/T 6462-2005 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
  • GB/T 12690.4-1990 Cerium oxide--Determination of lanthanum oxide, praseodymium oxide, neodymium oxide, samarium oxide and yttrium oxide contents--Spectrochemical method
  • GB/T 12690.9-1990 Neodymium oxide--Determination of lanthanum oxide, cerium oxide, praseodymium oxide, samarium oxide and yttrium oxide contents--Spectrochemical method
  • GB/T 12690.2-1990 Lanthanum oxide--Determination of neodymium oxide, cerium oxide, praseodymium oxide, samarium oxide and yttrium oxide contents-Emission spectrographic method
  • GB/T 12690.6-1990 Praseodymium oxide--Determination of lanthanum oxide, cerium oxide, neodymium oxide, samarium oxide and yttrium oxide contents--Emission spectrographic method
  • GB/T 12690.10-1990 Gadolinium oxide--Determination of samarium oxide, europium oxide, terbium oxide, dysprosium oxide and yttrium oxide contents--Emission spectrographic method
  • GB/T 12690.29-2000 Rare earth metals and their oxide Determination of cerium oxide content-Fluorescent spectrophotometric method
  • GB/T 15653-1995 Measuring methods for gas sensors of metal-oxide semiconductor
  • GB/T 12690.5-1990 Praseodymium oxide--Determination of lanthanum oxide, cerium oxide, neodymium oxide, samarium oxide and yttrium oxide contents--X ray fluorescence spectrometric method
  • GB/T 41917-2022 Nanotechnologies—Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
  • GB/T 12690.11-1990 Terbium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,samarium oxide,europium oxide,gadolinium oxide,dysprosium oxide,holmium oxide,erbium oxide and yttrium oxide contents--Emission spectrographi
  • GB/T 12690.13-1990 Neodymium and samarium--Determination of carbon content--High frequency--Infrared absorption method
  • GB/T 12690.14-1990 Lanthanum oxide, cerium oxide, neodymium oxide, gadolinium oxide--Determination of cobalt, iron,manganese, nichel, copper, ckromium, lead and zinc in oxides contents--Emission spectrographic method
  • GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
  • GB/T 15917.1-1995 Dysprosium and dysprosium oxide--Determination of gadolinium oxide, terbium oxide, holmium oxide, erbium oxide and yttrium oxide contents--Emission spectrographic method
  • GB/T 28547-2012 Selection and application recommendations of metal oxide surge arresters for a.c.systems
  • GB/T 12690.1-1990 Lanthanum oxide--Determination of cerium oxide, praseodymium oxide, nedeodynium oxide, samarium oxide and yttrium oxide--Induetively coupled plasma atomic emission spectrographic method
  • GB/T 12690.28-2000 Rare earth metals and their oxide-Determination of calcium oxide content-Inductively coupled plasma atomic emission spectrographic method
  • GB/T 16480.1-1996 Method for chemical analysis of yttrium and yttrium oxide--Determination of lanthanum oxide,cerium oxide,praseodymium oxide,neodymium oxide,samarium oxide,europium oxide, gadolinium oxide,terbium oxide,dysprosium oxide,holmium oxide,erbium oxide,thulium o
  • GB/T 12690.27-1990 Rare-earth metals and their oxides--Determination of ignition loss--Gravimetric method
  • GB/T 12690.3-2002 Chemical analysis methods for non-RE impurity of rare earth metals and their oxides-Determination of water content of rare earth oxides-Gravimetric method
  • GB/T 12690.2-2002 Chemical analysis methods for non-RE impurity of rare earth metals and their oxides Determination of ignition loss content of rare earth oxides-Gravimetric method
  • GB/T 12690.17-1990 Rare-earth metals and their oxides--Determination of calcium content--Nitrous oxide-acetylene flame atomic absorption spectrometric method
  • GB/T 12690.14-2006 Chemical analysis methods for non-rare earth impurities in rare earth metals and their oxide.Determination of titanium in rare earth metals
  • GB/T 12690.15-2006 Chemical analysis methods for non-rare earth metals and their oxide.Determination of calcium oxide content
  • GB/T 12690.17-2010 Chemical analysis methods of non-rare earth impurities in rare earth metals and the oxides.Part 17: Determination of niobium and tantalum contents of rare earth metals
  • GB/T 16480.2-1996 Methods for chemical analysis of yttrium and yttrium oxide--Determination of tantaium,titanium,copper and nickel content
  • GB/T 12690.3-2015 Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides.Part 3:Determination of water content of rare earth oxides.Gravimetric method
  • GB/T 12690.2-2015 Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides.Part 2: Determination of ignition loss content of rare earth oxides.Gravimetric method
  • GB/T 12690.16-1990 Rare-earth metals and their oxides--Determination of calcium content--Flame atomic absorption spectrometric method
  • GB/T 12690.2-2015(英文版) Chemical analysis methods for nonrare earth impurity of rare earth metals and their oxides—Part 2: Determination of ignition loss content of rare earth oxides—Gravimetric method
  • GB/T 12690.19-1990 Rare-earth metals and their oxides--Determination of iron content--1,10-phenanthroline spectrophotometric method
  • GB/T 15917.2-1995 Dysprosium and dysprosium oxide--Determination of copper, molybdenum, nickel and titanium contents--Inductively coupled plasma atomic emission spectrographic method
  • GB/T 5686.1-2008 Ferromanganese, ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal. Determination of manganese content. Potentiometric method and titrimetric mothod after ammonium nitrate & perchloric acid oxidation
  • GB/T 5686.1-2022 Ferromanganese，ferromanganese-silicon，nitrogen-bearing ferromanganese and manganese metal—Determination of manganese content—Potentiometric method， titrimetric method after ammonium nitrate oxidation
  • GB/T 12690.4-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides Determination of oxygen and nitrogen content Impulse-infrared and impulse-thermal conductance absorption method
  • GB/T 12690.9-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of chlorine content-Silver nitrate turbidimetric method
  • GB/T 12967.6-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 6: Determination of color differences and appearance of colored anodic oxide films by viewing method
  • GB/T 12690.1-2002 Chemical analysis methods for non-RE impurity of rare earth metals and their oxides-Determination of carbon and sulfur contents--High frequency-infrared absorption method
  • GB/T 12690.7-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of silicon content-Molybdenum blue spectrophotometric method
  • GB/T 12690.24-1990 Rare-earth metals and their oxides--Determination of aluminum content--Aluminum-chromazurol S-hexadecyl-trimethyl ammonium bromide-ethanol spectrophotometric method
  • GB/T 12690.10-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of phosphorus content by molybdenum blue spectrophotometric method
  • GB/T 12690.11-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of magnesium content-Flame atomic absorption spectrometric method
  • GB/T 12690.8-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of sodium content-Flame atomic absorption spectrometric method
  • GB/T 18115.1-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Lanthanum - Determination of cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and y
  • GB/T 18115.12-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Yttrium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium, gadolinium,terbium,dysprosium,holmium,erbium,thulium, ytterbium and lutetium conte
  • GB/T 18115.11-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides .Erbium,Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium, gadolinium,terbium,dysprosium,holmium,thulium, ytterbium and lutetium and yttrium
  • GB/T 18115.10-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Holmium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium, gadolinium,terbium,dysprosium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.9-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Dysprosium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium, gadolinium,terbium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.8-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Terbium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium, gadolinium,dysprosium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.7-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Gadolinium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium, terbium,dysprosium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.6-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Europium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,gadolinium, terbium,dysprosium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.5-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Samarium.Determination of lanthanum,cerium,praseodymium,neodymium,europium,gadolinium, terbium,dysprosium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.4-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Neodymium.Determination of lanthanum,cerium,praseodymium,samarium,europium,gadolinium, terbium,dysprosium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.3-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Praseodymium.Determination of lanthanum,cerium,neodymium,samarium,europium,gadolinium, terbium,dysprosium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 18115.2-2006 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Cerium.Determination of lanthanum,praseodymium,neodymium,samarium,europium,gadolinium, terbium,dysprosium,holmium,erbium,thulium, ytterbium, lutetium and yttrium cont
  • GB/T 32520-2016 Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
  • GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
  • GB/T 11107-1989 Metallic and its compound powder--Determination of specific surface and particle size by air permeating method
  • GB/T 36159-2018 Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications
  • GB/T 12690.1-2015 Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides.Part 1: Determination of carbon and sulfur contents.High frequency-infrared absorption method
  • GB/T 12690.16-2010 Chemical analysis methods of non-rare earth impurities in rare earth metals and the oxides—Part 16:Determination of fluorine content—Ion selective electrode analysis
  • GB/T 12690.1-2022 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 1：Determination of carbon and sulfur contents—High frequency-infrared absorption method
  • GB/T 12690.5-2017(英文版) "Chemical analysis methods for nonrare earth impurities of rare earth metals and their oxides—Part 5:Determination of cobalt,manganese,lead,nickel,copper,zinc,aluminum,chromium,magnesium, cadmium,v"
  • GB/T 18115.13-2010 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides.Part 13:Thulium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium,gadolinium,terbium,dysprosium,holmium,erbium,ytterbium,lutetium and yttrium
  • GB/T 18115.14-2010 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides.Part 14:Ytterbium.Determination of lanthanum,cerium,praseodymium,neodymium,samarium,europium,gadolinium,terbium,dysprosium,holmium,erbium,thulium,lutetium and yttrium
  • GB/T 18115.15-2010 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides.Part 15: Lutetium.Determination of lanthanum, cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbiu
  • GB/T 12690.6-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of iron content-Kalium thiocyanate,1,10-phenanthroline spectrophotometric method

HU-MSZT, Metal oxides and detection

International Organization for Standardization (ISO), Metal oxides and detection

  • ISO/TS 5094:2023 Nanotechnologies — Assessment of peroxidase-like activity of metal and metal oxide nanoparticles
  • ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
  • ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
  • ISO 1463:1973 Title missing - Legacy paper document
  • ISO 1463:1982 Metallic and oxide coatings; Measurement of coating thickness; Microscopical method
  • ISO 1463:2003 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
  • ISO/TR 20489:2018 Nanotechnologies — Sample preparation for the characterization of metal and metal-oxide nano-objects in water samples
  • ISO/DIS 21068-3 Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
  • ISO 15721:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
  • ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
  • ISO 21149:2006 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria
  • ISO 21149:2017 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria
  • ISO/DIS 23597 Rare earth — Determination of rare earth content in individual rare earth metal and their oxides — Titration method
  • ISO/FDIS 23597 Rare earth — Determination of rare earth content in individual rare earth metal and their oxides — Titration method
  • ISO 23597:2023 Rare earth — Determination of rare earth content in individual rare earth metals and their oxides — Titration method
  • ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
  • ISO/TS 18827:2017 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
  • ISO 17299-5:2014 Textiles - Determination of deodorant property - Part 5: Metal-oxide semiconductor sensor method
  • ISO 5558:1982 Animal and vegetable fats and oils; Detection and identification of antioxidants; Thin-layer chromatographic method
  • ISO 9006:1994 Uranium metal and uranium dioxide powder and pellets - Determination of nitrogen content - Method using ammonia-sensing electrode
  • ISO 21149:2017/Amd 1:2022 Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria — Amendment 1
  • ISO 15724:2001 Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method
  • ISO/DIS 24181-1:2023 Rare Earth — Determination of non-rare earth impurities in individual rare earth metals and their oxides — ICP-AES — Part 1: Analysis of Al, Ca, Mg, Fe and Si

British Standards Institution (BSI), Metal oxides and detection

  • PD ISO/TS 5094:2023 Nanotechnologies. Assessment of peroxidase-like activity of metal and metal oxide nanoparticles
  • BS ISO 21608:2012 Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
  • BS EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
  • BS EN ISO 1463:2021 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
  • PD ISO/TR 20489:2018 Nanotechnologies. Sample preparation for the characterization of metal and metal-oxide nano-objects in water samples
  • 20/30395419 DC BS EN ISO 1463. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
  • BS EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
  • 23/30446960 DC BS EN ISO 21068-3. Chemical analysis of raw materials and refractory products containing silicon carbide, silicon nitride, silicon oxynitride and sialon - Part 3. Determination of nitrogen, oxygen and metallic and oxidic constituents
  • BS EN 60811-501:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
  • BS EN ISO 21149:2017 Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
  • BS EN ISO 21149:2006 Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
  • BS EN ISO 21149:2009 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria
  • BS ISO 17299-5:2014 Textiles. Determination of deodorant property. Metal-oxide semiconductor sensor method
  • BS ISO 23597:2023 Rare earth. Determination of rare earth content in individual rare earth metals and their oxides. Titration method
  • BS EN IEC 61643-331:2020 Components for low-voltage surge protection - Performance requirements and test methods for metal oxide varistors (MOV)
  • BS EN ISO 21149:2017+A1:2022 Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
  • BS EN ISO 6988:1986 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture
  • BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
  • BS EN 50545-1:2011+A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • BS EN ISO 3960:2008 Animal and vegetable fats and oils - Determination of peroxide value - Iodometric (visual) endpoint determination
  • BS EN ISO 2128:2010 Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
  • 22/30390772 DC BS ISO 23596. Rare earth. Determination of rare earth content in individual rare earth metal and their oxides. Gravimetric method
  • 22/30390775 DC BS ISO 23597. Rare earth. Determination of rare earth content in individual rare earth metal and their oxides. Titration method
  • PD ISO/TS 13907:2012 Soil quality. Determination of nonylphenols (NP) and nonylphenol mono- and diethoxylates. Method by gas chromatography with mass selective detection (GC-MS)
  • PD ISO/TS 18827:2017 Nanotechnologies. Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
  • BS EN 60811-403:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Ozone resistance test on cross-linked compounds
  • BS EN ISO 15721:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
  • 21/30444636 DC BS EN ISO 21149 AMD1. Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
  • BS EN 15791:2009 Foodstuffs - Determination of deoxynivalenol in animal feed - HPLC method with immunoaffinity column clean-up
  • BS PD IEC TS 62607-8-2:2021 Nanomanufacturing. Key control characteristics. Nano-enabled metal-oxide interfacial devices. Test method for the polarization properties by thermally stimulated depolarization current
  • BS EN 60811-601:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of the drop point of filling compounds
  • BS IEC 62373-1:2020 Semiconductor devices. Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) - Fast BTI test for MOSFET
  • PD IEC TS 62607-8-1:2020 Nanomanufacturing. Key control characteristics. Nano-enabled metal-oxide interfacial devices. Test method for defect states by thermally stimulated current
  • 23/30464876 DC BS EN 12972 AMD1. Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
  • BS EN 12972:2018 Tracked Changes. Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks

NO-SN, Metal oxides and detection

  • NS 1181-1979 Metal and oxide coating - Measurement of thickness by microscopical examination of cross-sections

SE-SIS, Metal oxides and detection

  • MNC 60-1981 Ferroalloys, meta/s and oxides - Alloying materials
  • MNC 60 E-1981 Ferroalloys, metals and oxides - Al I oy ing materials - Summary
  • SIS SMS 2953-1971 Measurement of metal and oxide coating thicknesses by microscopic examination of cross-sections
  • SIS SS-ISO 1463:1983 Meta I lic and oxide coatings - Measure- ment of coating thickness - Microscopi- cal method
  • SIS SS-ISO 9892:1992 Uranium metal, uranium dioxide powder and pellets, and uranyl nitrate solutions — Determination of fluorine content — Fluoride ion selective electrode method
  • MNC 310-1989 Metallic materials — Testing — Generalphysical, chemical, electrical and other properties — Summary
  • MNC 310 E-1989 Metallic materials — Testing — General physical, chemical, electrical and other properties — Summary

Professional Standard - Machinery, Metal oxides and detection

  • JB/T 10492-2011 Monitoring devices for metal-oxide surge arresters
  • JB/T 10492-2004 Monitors for metal oxide surge arresters without gaps in a.c. system

ES-UNE, Metal oxides and detection

  • UNE-EN 24501:1993 HARDMETALS. DETERMINATION OF TITANIUM. PHOTOMETRIC PEROXIDE METHOD. (Endorsed by AENOR in January of 1994.)
  • UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
  • UNE-EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008) (Endorsed by AENOR in October of 2008.)
  • UNE-EN 12972:2019 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
  • UNE-EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006). (Endorsed by AENOR in November of 2006.)
  • UNE-EN ISO 22479:2023 Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
  • UNE-EN 62417:2010 Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) (Endorsed by AENOR in September of 2010.)
  • UNE-EN IEC 61643-331:2020 Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV) (Endorsed by Asociación Española de Normalización in June of 2020.)
  • UNE-EN 50545-1:2012/A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • UNE-EN ISO 21149:2017/A1:2023 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria - Amendment 1 (ISO 21149:2017/Amd 1:2022)
  • UNE-CEN/TR 17345:2019 Waste - State-of-the-art document - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Endorsed by Asociación Española de Normalización in March of 2019.)

Danish Standards Foundation, Metal oxides and detection

  • DS/EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
  • DS/ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method
  • DS/ISO 1463:1983 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
  • DS/EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
  • DS/EN ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method (ISO 1463:2021)
  • DS/EN ISO 1463:1994 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
  • DS/EN 62373:2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET)
  • DS/EN ISO 21149:2009 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria
  • DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method
  • DS/EN 62417:2010 Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs)
  • DS/EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
  • DS/EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • DS/ISO/TS 13907:2012 Soil quality - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates - Method by gas chromatography with mass selective detection (GC-MS)
  • DS/CEN/TS 16182:2012 Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS)
  • DS/EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas

ZA-SANS, Metal oxides and detection

  • SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
  • SANS 21149:2008 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria

German Institute for Standardization, Metal oxides and detection

  • DIN EN ISO 1463:2021-08 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021); German version EN ISO 1463:2021
  • DIN EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004
  • DIN 50938:2018 Black oxide coatings on ferrous metal components - Requirements and test methods
  • DIN 50938:2018-01 Black oxide coatings on ferrous metal components - Requirements and test methods
  • DIN EN ISO 21068-3:2008-12 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008); German version EN ISO 21068-3:2008
  • DIN EN 12972:2018-09 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks; German version EN 12972:2018 / Note: To be amended by DIN EN 12972/A1 (2023-02).
  • DIN EN 12972/A1:2023-02 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks; German and English version EN 12972:2018/prA1:2023 / Note: Date of issue 2023-01-06*Intended as an amendment to DIN EN 12972 (2018-09).
  • DIN 54387-4:2023-08 Testing of ceramic raw materials and ceramic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 4: Determination of metallic main components and trace impurities
  • DIN EN 62373:2007-01 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006); German version EN 62373:2006
  • DIN EN ISO 21149:2023-01 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2017 + Amd 1:2022); German version EN ISO 21149:2017 + A1:2022
  • DIN EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008); English version of DIN EN ISO 21068-3:2008-12
  • DIN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021); German version EN ISO 1463:2021
  • DIN EN ISO 6988:1997 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985); German version EN ISO 6988:1994
  • DIN EN ISO 22479:2022-08 Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019); German version EN ISO 22479:2022
  • DIN 38404-6:1984-05 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6)
  • DIN CEN/TS 16182:2012-05*DIN SPEC 91262:2012-05 Sludge, treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS); German version CEN/TS 16182:2012
  • DIN EN 62417:2010-12 Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) (IEC 62417:2010); German version EN 62417:2010
  • DIN 30901:2016 Heat treatment of ferrous materials - Determination of the depth and form of appearance of the internal oxidation
  • DIN 30901:2016-12 Heat treatment of ferrous materials - Determination of the depth and form of appearance of the internal oxidation
  • DIN EN 10276-1:2000-08 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000
  • DIN 38404-6 Berichtigung 1:2018-12 German standard methods for the examination of water, waste water and sludge - Physical and physico-chemical parameters (group C) - Part 6: Determination of the oxidation reduction (redox) potential (C 6); Corrigendum 1
  • DIN 51400-7:1992 Testing of mineral oils and fuels; determination of sulfur content (total sulfur); microcoulometric determination, oxidation method
  • DIN 54387-2:2016-12 Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 2: Determination of total boron, soluble boron compounds, HNO<(Index)3>-soluble boron in B<(Index)4>C, ...
  • DIN EN ISO 21068-3:2023-07 Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO/DIS 21068-3:2023); German and En...
  • DIN V 51408-2:1987 Testing of mineral oil hydrocarbons; determination of chlorine content; microcoulometric determination, oxidation method
  • DIN EN ISO 15721:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001); German version EN ISO 15721:2001
  • DIN 30902:2016 Heat treatment of ferrous materials - Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts
  • DIN 30902:2016-12 Heat treatment of ferrous materials - Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts
  • DIN 38414-8:1985 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
  • DIN 38404-6:1984 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6)
  • DIN 54387-2:2016 Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 2: Determination of total boron, soluble boron compounds, HNO3-soluble boron in B4C, H2O2 soluble and insoluble fracti
  • DIN EN 4488:2012 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm; German and English version FprEN 4488:2012
  • DIN EN 4488:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm; German and English version EN 4488:2013

RO-ASRO, Metal oxides and detection

  • STAS 4605/10-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of magnesium oxide
  • STAS 4605/6-1988 NON-METAL BEARING MINING PRODUCTS WITH CARBONATES CONTENT Aluminium trioxide determination
  • STAS 4605/11-1972 NON-METAL BEARING MINING PRODI'CTS "WITH CARBONATE CONTENT Determinat ion of sodiuni and potassium oxide
  • STAS 7043/5-1986 Non-metallic coatings (inorganic) ANOIDIZING OF ALUMINIl'M AXD AIA'MI NUM ALLOYS Checking methods of oxide coating compactization
  • STAS 4605/5-1972 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of iron triox'de
  • STAS 4605/8-1972 NON-METAL BEARING .MINING PRODUCTS WITH CARBONATE CONTENT Determinaticm of mnnganese oxide
  • STAS 4605/9-1988 NON-METAL BEARING MINING PRODUCTS WITH CARBONATES CONTENT Calcium oxide content determinationc
  • STAS 4605/16-1980 NON METAL-BEARING MINING PRODUCTS "WITH CARBONATE CONTENT Detennination of carbon dioxide
  • STAS 4605/4-1972 NON-.METAI. BEAHING MINING PRODUCTS WITH CARHONATH CONTENT noterminatioii of silica
  • STAS SR EN ISO 1463:1996 Metallic and oxide coatings - Measurement of coating thickness -Microscopical method
  • STAS 7934-1967
  • SR 7043/1-1993 Non-metallic (anorganic) coatings. Anodic oxide coatings on aluminium and aluminium alloys. Tehnical requirements for quality
  • STAS 7043/4-1975 Non-metallic (non-organic ) coatings COATINGS BY ANODIZATION OF ALUMINIUM AND ALUMINIUM ALLOYS Determination of breakdown potential of the insulating layer
  • STAS 13087-1992 Non-ferous ores and concentrates, cyaniding lyes. Determination of free and total cyanide
  • STAS SR 13255-3-1995 Non ferrous ores and concentrates. Cyanided leachs Determination of copper content
  • STAS SR 13255-1-1995 Nonferrous ores and concentrates.Cyanided leachs Determination of zinc content
  • STAS SR 13255-5-1995 Non ferrous ores and concentrates. Cyanided leachs Determination of arsen content
  • STAS SR 13255-4-1995 Non ferrous ores and concentrates. Cyanided leachs Determination of iead content
  • STAS SR 13255-2-1995 Non ferrous ores and concenfrates. Cyanided leachs Determination of copper content

Association Francaise de Normalisation, Metal oxides and detection

  • NF EN 24501:1994 Métaux durs - Détermination du titane - Méthode photométrique au peroxyde.
  • NF A91-110:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.
  • NF A91-110*NF EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
  • NF A91-110:1995 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.
  • NF A91-411:1966 Surface treatment of metals. Anodisation (anodic oxidation) of aluminium and its alloys. Check of corrosion resistance.
  • A05-300:1987 Physical-chemical tests. Recommendations for laboratory testing. Corrosion resistance of metals, alloys and metallic coatings.
  • NF T75-602:2006 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria.
  • NF EN ISO 1463:2021 Revêtements métalliques et couches d'oxyde - Mesurage de l'épaisseur de revêtement - Méthode par coupe micrographique
  • NF M88-108:2007 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks.
  • NF M88-108:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
  • NF EN 62373:2006 Essai de stabilité de température en polarisation pour transistors à effet de champ métal-oxyde-semiconducteur (MOSFET)
  • NF T75-602:2009 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria.
  • NF T75-602*NF EN ISO 21149:2017 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria
  • NF EN ISO 21149:2017 Cosmétiques - Microbiologie - Dénombrement et détection des bactéries aérobies mésophiles
  • NF B49-423-3*NF EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3 : determination of nitrogen, oxygen and metallic and oxidic constituents.
  • NF A05-106*NF EN ISO 6988:1995 Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture.
  • NF A91-404:1966 Surface treatment of metals. Anodizing (anodic oxydizing) of aluminium and its alloys. Measurement of thickness.
  • FD ISO/TR 17276:2014 Cosmétiques - Approche analytique des méthodes de détection et de quantification des métaux lourds dans les cosmétiques
  • NF EN ISO 21068-3:2008 Analyse chimique des matières premières et des produits réfractaires contenant du carbure de silicium - Partie 3 : dosage de l'azote, de l'oxygène et des constituants métalliques et oxydés
  • NF A91-481*NF EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
  • NF EN 62417:2010 Dispositifs à semiconducteurs - Essais d'ions mobiles pour transistors à semiconducteur à oxyde métallique à effet de champ (MOSFET)
  • NF C61-743-331*NF EN IEC 61643-331:2020 Components for low-voltage surge protection - Part 331 : performance requirements and test methods for metal oxide varistors (MOV)
  • NF EN IEC 61643-331:2020 Composants pour parafoudres basse tension - Partie 331 : exigences de performance et méthodes d'essai pour les varistances à oxyde métallique (MOV)
  • NF EN ISO 2819:2018 Revêtements métalliques sur bases métalliques - Dépôts électrolytiques et dépôts par voie chimique - Liste des différentes méthodes d'essai d'adhérence
  • XP CEN/TS 16182:2012 Boues, biodéchets traités et sols - Détermination des nonylphénols et nonylphénol-mono- et di-éthoxylates par chromatographie en phase gazeuse avec détection sélective de masse (GC-MS)
  • NF EN 50545-1:2012 Appareil électrique de détection de mesure de gaz combustible et toxique dans les parcs de stationnement et les tunnels - Partie 1 : exigences de performance générales et méthodes pour la détection et la mesure du monoxyde de carbone et d'oxyde ...
  • NF C61-743-331*NF EN IEC 61643-331:2018 Components for low-voltage surge protective devices - Part 331 : performance requirements and test methods for metal oxide varistors (MOV)
  • NF C23-504-1/A1*NF EN 50545-1/A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1 : general performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • NF A06-392-1*NF EN 10276-1:2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1 : sampling and preparation of steel samples for oxygen determination
  • NF C23-504-1*NF EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1 : general performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides.
  • NF EN ISO 21149/A1:2022 Cosmétiques - Microbiologie - Dénombrement et détection des bactéries aérobies mésophiles - Amendement 1
  • NF EN 12972:2018 Citernes destinées au transport de matières dangereuses - Épreuve, contrôle et marquage des citernes métalliques
  • XP X31-073*XP CEN/TS 16182:2012 Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS)
  • NF ISO 14442:2006 Qualité de l'eau - Lignes directrices pour essais d'inhibition de la croissance algale avec des matières peu solubles, des composés volatils, des métaux et des eaux résiduaires
  • NF EN ISO 18254-1:2016 Textiles - Méthode de détection et de détermination des alkylphénol éthoxylés (APEO) - Partie 1 : méthode uilisant la CLHP-SM
  • NF C32-011-403*NF EN 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403 : miscellaneous tests - Ozone resistance tests on cross-linked compounds

BE-NBN, Metal oxides and detection

  • NBN-EN 24501-1994 Hardmetals. Determination of titanium. Photometric peroxide method (ISO 4501:1978)
  • NBN-EN ISO 1463:1995 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:1982)
  • NBN EN ISO 6988:1995 Metallic and other non organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Metal oxides and detection

  • GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
  • GB/T 12690.18-2017 Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides— Part 18: Determination of zirconium content
  • GB/T 12690.5-2017 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 5: Determination of cobalt,manganese,lead,nickel,copper,zinc,aluminum,chromium,magnesium,cadmium,vanadium and iron contents

American Society for Testing and Materials (ASTM), Metal oxides and detection

  • ASTM B487-20 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
  • ASTM B487-85(1997) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
  • ASTM E1652-00 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
  • ASTM UOP389-04 Trace Metals in Oils by Wet Ashing and ICP-OES
  • ASTM F1153-92(1997) Standard Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements
  • ASTM C1430-07 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
  • ASTM C1430-00 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
  • ASTM C1430-07(2011)e1 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
  • ASTM E2864-13 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
  • ASTM D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM C1430-18 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
  • ASTM UOP989-14 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • ASTM B527-20 Standard Test Method for Tap Density of Metal Powders and Compounds
  • ASTM F616M-96 Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
  • ASTM F616M-96(2003) Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
  • ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM UOP988-11 Low Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • ASTM B527-93(1997) Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
  • ASTM B527-93(2000)e1 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
  • ASTM B527-14 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds
  • ASTM D7423-23 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
  • ASTM D7423-16a Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM D7423-17 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

Korean Agency for Technology and Standards (KATS), Metal oxides and detection

  • KS D 8519-2009 Metallic and oxide coating-Measurement of coating thickness-Microscopical method
  • KS D 8519-2009(2015) Metallic and oxide coating－Measurement of coating thickness－Microscopical method
  • KS L ISO 21068-3-2012(2022) Chemical analysis of silicon-carbide-containing raw materials and refractory products－Part 3：Determination of nitrogen, oxygen and metallic and oxidic constituents
  • KS M ISO 21149:2007 Cosmetics-Microbiology-Enumeration and detection of aerobic mesophilic bacteria
  • KS L ISO 21068-3:2012 Chemical analysis of silicon-carbide-containing raw materials and refractory products-Part 3:Determination of nitrogen, oxygen and metallic and oxidic constituents
  • KS M ISO 806:2003 Aluminium oxide primarily used for the production of aluminium-Determination of loss of mass at 1 000℃ and 1 200℃
  • KS M ISO 806:2013 Aluminium oxide primarily used for the production of aluminium－Determination of loss of mass at 1 000℃ and 1 200℃
  • KS L ISO 21068-3-2012(2017) Chemical analysis of silicon-carbide-containing raw materials and refractory products－Part 3：Determination of nitrogen, oxygen and metallic and oxidic constituents
  • KS H ISO 5558:2008 Animal and vegetable fats and oils－Detection and identification of antioxidants－Thin-layer chromatographic method
  • KS H ISO 5558-2008(2018) Animal and vegetable fats and oils－Detection and identification of antioxidants－Thin-layer chromatographic method
  • KS M ISO 21149:2018 Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria
  • KS D ISO 2128:2011 Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
  • KS M 3100-1-2010 Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions-Part 1:Analysis of evolved carbon dioxide by titration method
  • KS A ISO 9006:2008 Uranium metal and uranium dioxide powder and pellets－Determination of nitrogen content－Method using ammonia-sensing electrode
  • KS A ISO 9006-2008(2018) Uranium metal and uranium dioxide powder and pellets－Determination of nitrogen content－Method using ammonia-sensing electrode
  • KS C ISO TS 18827:2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials
  • KS E ISO 13543:2003 Copper, lead and zinc sulfide concentrates－Determination of mass of contained metal in a lot
  • KS E ISO 13543:2020 Copper, lead, zinc and nickel sulfide concentrates —Determination of mass of contained metal in a lot
  • KS M ISO 2828:2003 Aluminium oxide primarily used for the production of aluminium－Determination of fluorine content－Alizarin complexone and lanthanum chloride spectrophotometric method
  • KS E ISO 12743:2008 Copper, lead, zinc and nickel concentrates-Sampling procedures for determination of metal and moisture content

YU-JUS, Metal oxides and detection

  • JUS C.A6.031-1990 Metal11c and oxid coatlngs. tteasurement of coatlng thickness. Hicroscopical method
  • JUS C.T7.237-1984 Anodic oxidation of aluminium and aluminium alloys. Chack of continuity of thin anodic oxide coatings — Copper sulphate test
  • JUS C.T7.226-1984 Anodic oxidation of afuminium and aluminium alloys. Microscopic determination of thickness of oxide coating
  • JUS C.T7.228-1984 Anodic oxidation of a/uminium and aluminium allols. Measurement of thickness of oxide coatings. Eddy current method
  • JUS E.K8.041-1991 Vegetable fats and oils. Detection and Identification of antioxidants. Thin layer chromatograpbic method
  • JUS C.T7.225-1984 Anodic oxidation of aluminium and aluminium alloys. Determination of mass par unit area of anodic oxide coatings. Gravimetric method
  • JUS C.T7.232-1984 Anodic oxidation of aluminium and aluminium alloys. Assessment of sealing quality of oxide coating by measurement of the loss of mass after imersion in acidified solution (sodium acetate + acetic acid or acidified solution of sodium sulfite)
  • JUS C.A5.022-1977 Corrosion testing. Testing of metak, metalic and other coatings in damp heat alterinating atmosphere containing sulphur dioxide.

European Committee for Standardization (CEN), Metal oxides and detection

  • EN ISO 1463:1994 Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method (ISO 1463 : 1982)
  • EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
  • EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
  • EN ISO 21149:2017 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria
  • EN ISO 21149:2009 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2006)
  • EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008)
  • CEN/TS 16182:2012 Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS)
  • EN ISO 21149:2017/A1:2022 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria - Amendment 1 (ISO 21149:2017/Amd 1:2022)
  • EN ISO 15721:2001 Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings by Sulfurous Acid/Sulfur Dioxide Vapour ISO 15721:2001

Professional Standard - Electron, Metal oxides and detection

  • SJ 20026-1992 Measuring methods for gas sensors of metal-oxide semiconductor
  • SJ/T 11824-2022 Metal Oxide Semiconductor Field Effect Transistor (MOSFET) Equivalent Capacitance and Voltage Change Rate Test Method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Metal oxides and detection

  • IEEE 641-1987 STANDARD DEFINITIONS AND CHARACTERIZATION OF METAL NITRIDE OXIDE SEMICONDUCTOR ARRAYS
  • IEEE C62.33-2016 Test Methods and Performance Values for Metal-Oxide Varistor Surge Protective Components
  • IEEE C62.11A-2008 Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV) Amendment 1: Short-Circuit Tests for Station@ Intermediate@ and Distribution Arresters

AT-ON, Metal oxides and detection

CH-SNV, Metal oxides and detection

PL-PKN, Metal oxides and detection

  • PN-EN ISO 1463-2021-10 E Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method (ISO 1463:2021)
  • PN P04641-1973 Textiles Detection of oxydizing and reducing substances after bleaching process

Institute of Electrical and Electronics Engineers (IEEE), Metal oxides and detection

  • ANSI/IEEE Std 641-1987 IEEE Standard Definitions and Characterization of Metal Nitride Oxide Semiconductor Arrays
  • IEEE Std 581-1978 IEEE Standard Definitions, Symbols, and Characterization of Metal-Nitride-Oxide Field-Effect Transistors
  • IEEE Std C62.33-2016 IEEE Standard for Test Methods and Performance Values for Metal-Oxide Varistor Surge Protective Components
  • IEEE PC62.33/D4, May 2015 IEEE Approved Draft Standard for Test Methods and Performance Values of Metal-Oxide Varistor Surge Protective Components
  • IEEE PC62.33/D6, September 2016 IEEE Approved Draft Standard for Test Methods and Performance Values of Metal-Oxide Varistor Surge Protective Components
  • IEEE 581-1978 IEEE Standard Definitions, Symbols, and Characterization of Metal-Nitrite-Oxide Field-Effect Transistors

Taiwan Provincial Standard of the People's Republic of China, Metal oxides and detection

  • CNS 8106-1981 Method for Measuring MOSFET Saturated Threshold Voltage
  • CNS 8104-1981 Method for Measuring MOSFET Linear Threshold Voltage

Lithuanian Standards Office , Metal oxides and detection

  • LST EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
  • LST EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
  • LST EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008)
  • LST EN ISO 15721:2002 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
  • LST EN 10276-1-2000 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
  • LST EN 62373-2006 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) (IEC 62373:2006)
  • LST EN ISO 21149:2009 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2006)
  • LST EN 50545-1-2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels -- Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • LST EN ISO 6988:2001 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)
  • LST EN 62417-2010 Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) (IEC 62417:2010)
  • LST ISO 5558:2003 Animal and vegetable fats and oils - Detection and identification of antioxidants - Thin-layer chromatographic method (idt ISO 5558:1982)
  • LST EN 15791-2010 Animal feeding stuffs - Determination of Deoxynivalenol in animal feed - HPLC method with UV detection and immunoaffinity column clean-up
  • LST EN 10276-2-2004 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas

AENOR, Metal oxides and detection

  • UNE-EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
  • UNE 146507-1:1999 EX TEST FOR AGGREGATES. DETERMINATION OF THE POTENTIAL REACTIVITY OF AGGREGATES. CHEMICAL METHOD. PART 1: DETERMINACION OF THE REACTIVITY ALKALI-SILICA AND ALKALI-SILICATE.
  • UNE-EN ISO 21149:2017 Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2017)
  • UNE-EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • UNE-EN 10276-1:2001 CHEMICAL ANALYSIS OF FERROUS MATERIALS. DETERMINATION OF OXYGEN IN STEEL AND IRON. PART 1: SAMPLING AND PREPARATION OF STEEL SAMPLES FOR OXYGEN DETERMINATION.
  • UNE-EN ISO 6988:1996 METALLIC AND OTHER NON-ORGANIC COATINGS. SULFUR DIOXIDE TEST WITH GENERAL CONDENSATION OF MOISTURE. (ISO 6988:1985).
  • UNE-EN 15791:2010 Animal feeding stuffs - Determination of Deoxynivalenol in animal feed - HPLC method with UV detection and immunoaffinity column clean-up
  • UNE-EN 10276-2:2004 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas

Group Standards of the People's Republic of China, Metal oxides and detection

  • T/GDC 143-2022 Fugitive emissions—Determination of volatile organic compounds metal oxide method
  • T/CASAS 016-2022 Transient dual test method for the measurement of the thermal resistance junction to case of silicon carbide metal-oxide-semiconductor field-effect-transistor（SiC MOSFET）
  • T/CSTM 00761-2021 Nickel—Determination of selenium and tellurium contents —Hydride generation- atomic fluorescence spectrometric method
  • T/CSTM 00760-2021 Nickel—Determination of arsenic, antimony and bismuth contents —Hydride generation- atomic fluorescence spectrometric method

Defense Logistics Agency, Metal oxides and detection

国家市场监督管理总局、中国国家标准化管理委员会, Metal oxides and detection

  • GB/T 40897-2021 Determination of alkali sulfides and alkaline earth sulfides in cosmetics—Methylene blue spectrophotometric method
  • GB/T 12690.15-2018 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides―Part 15: Determination of calcium content
  • GB/T 12690.7-2021 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 7: Determination of silicon content
  • GB/T 12690.8-2021 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 8: Determination of sodium content
  • GB/T 39897-2021 Determination of volatile organic compounds and aldehydes and ketones in nonmetallic parts of vehicles
  • GB/T 12690.19-2018 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 19: Determination of arsenic and mercury contents
  • GB/T 12690.4-2021 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 4: Determination of oxygen and nitrogen contents—Impulse-infrared absorption and impulse-thermal conductivity method
  • GB/T 12967.6-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance
  • GB/T 12967.1-2020 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance
  • GB/T 12967.3-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test
  • GB/T 12967.5-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking
  • GB/T 12967.4-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance
  • GB/T 11107-2018 Metallic and its compound powder—Determination of specific surface and particle size—Air permeating method
  • GB/T 18115.4-2021 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides—Part 4: Determination of lanthanum, cerium, praseodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttri
  • GB/T 18115.2-2020 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides—Part 2: Determination of lanthanum, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yt
  • GB/T 18115.1-2020 Chemical analysis methods of rare earth impurities in rare earth metals and their oxides—Part 1: Determination of cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and ytt

US-FCR, Metal oxides and detection

Universal Oil Products Company (UOP), Metal oxides and detection

  • UOP 407-2009 Trace Metals in Organics by Dry Ashing - ICP-OES
  • UOP 989-2014 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • UOP 988-2011 Low Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Metal oxides and detection

  • PREN 3796-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Ability of Anaerobic Polymerisable Compounds to Set on Metal Surfaces (Edition P1)
  • PREN 7000-7-1998 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 7: Anaerobic Polymerisable Compounds

IT-UNI, Metal oxides and detection

Professional Standard - Building Materials, Metal oxides and detection

  • JC/T 2147-2012 Determination of trace metal elements in high purity alumina by inductively coupled plasma atomic emission spectrometry

CZ-CSN, Metal oxides and detection

  • CSN 70 0641 Cast.3-1976 Chemical análysis of glass. Determinat- ion of alkali metal oxides. Fláme photo- metric method (with the use of synthe- tic solutions)
  • CSN ISO 1463:1993 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
  • CSN 67 3094-1980 Laboratory testing of protective efficiency of palat coating on metals. Testing in sulphur dioxide atmosphere with condensing moisture and in salt spray fog

KR-KS, Metal oxides and detection

  • KS M ISO 21149-2018(2023) Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria
  • KS M ISO 21149-2018 Cosmetics — Microbiology — Enumeration and detection of aerobic mesophilic bacteria
  • KS C ISO TS 18827-2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials
  • KS E ISO 13543-2020 Copper, lead, zinc and nickel sulfide concentrates —Determination of mass of contained metal in a lot

Professional Standard - Light Industry, Metal oxides and detection

  • QB/T 3816-1999 Thickness testing method of the metal deposits and aluminum oxide films for the light industrial products.Weighing method

VN-TCVN, Metal oxides and detection

  • TCVN 6349-1998 Animal and vegetable fats and oils.Detection and indentification of antioxidants.Thin-layer chromatographic method

Indonesia Standards, Metal oxides and detection

  • SNI 13-6339.4.1-2001 Terms of metals, minerals and coal testing - Part D: Chemical testing of minerals and metals - Section 1: Gravimetric methods
  • SNI 13-6339.4.2-2001 Terms of metal, minerals and coal testing - Part D: Chemical testing of minerals and metals - Section 2: Volumetric methods

Jiangxi Provincial Standard of the People's Republic of China, Metal oxides and detection

  • DB36/T 688-2012 Chemical analysis of yttrium-rich oxides and their metals Determination of the composition of fifteen rare earth element oxides Inductively coupled plasma emission spectrometry

PH-BPS, Metal oxides and detection

  • PNS ISO/TS 18827:2021 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials

Military Standard of the People's Republic of China-General Armament Department, Metal oxides and detection

  • GJB 563-1988 Determination of Corrosion and Oxidation Stability of Light Aviation Lubricating Oils (Metal Sheet Method)

NL-NEN, Metal oxides and detection

  • NEN-EN 196-21-1993 Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement
  • NEN 6357-1990 Vegetable and animal oils and fats- Detection and identification of antioxidants Thin layer chromatographic method
  • NEN 5742-1991 Soil - Sampling of soil and sediments for the determination of metals, inorganic compounds, moderate volatile organic compounds and physico-chemical soil characteristics

International Electrotechnical Commission (IEC), Metal oxides and detection

  • IEC 61643-331:2020 Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
  • IEC TS 62607-8-3:2023 Nanomanufacturing - Key control characteristics - Part 8-3: Nano-enabled metal-oxide interfacial devices - Analog resistance change and resistance fluctuation: Electrical resistance measurement
  • IEC 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
  • IEC 62848-1:2016 Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
  • IEC 61643-331:2020 RLV Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)

European Committee for Electrotechnical Standardization（CENELEC）, Metal oxides and detection

  • EN IEC 61643-331:2020 Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
  • EN IEC 61643-331:2018 Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)

Standard Association of Australia （SAA）, Metal oxides and detection

CENELEC - European Committee for Electrotechnical Standardization, Metal oxides and detection

  • EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides

GM North America, Metal oxides and detection

(U.S.) Ford Automotive Standards, Metal oxides and detection

GOSTR, Metal oxides and detection

  • GOST ISO 22718-2018 Perfume and cosmetic products. Microbiology. Detection of Staphylococcus aureus
  • GOST EN 1601-2017 Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography method using flame ionization detector (O-FID)

Professional Standard - Environmental Protection, Metal oxides and detection

  • HJ 1045-2019 Technical requirements and testing methods for portable ultraviolet absorption measuring instruments for flue gas from stationary pollution sources (sulfur dioxide and nitrogen oxides)

工业和信息化部, Metal oxides and detection

  • YS/T 1525-2022 Chemical analysis methods for nickel-platinum alloys, determination of oxygen and nitrogen content, pulse-infrared absorption method and thermal conductivity detection method

Association of German Mechanical Engineers, Metal oxides and detection

  • VDI 3868 Blatt 1-1994 Determination of total emission of metals, metalloids, and their compounds - Manual measurement in flowing, emitted gases - Sampling system for particulate and filter-passing matter

U.S. Military Regulations and Norms, Metal oxides and detection

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Metal oxides and detection

  • ASHRAE 4168-1998 The Knitted Metal Fiber Burner: A New Generation of Surface Combustion Material for Radiant Heat and Low NOx Applications

  Metal Metal Oxide and Detection, Metal oxides and detection, Metal Oxide Detection, Detection of metal oxides, Metal Material Testing|Petroleum Product Testing|Oil and Chemical Testing.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved