ZH
RU
ES

Quality requirements and technology of electromagnetic flowmeter

Quality requirements and technology of electromagnetic flowmeter, Total:103 items.

In the international standard classification, Quality requirements and technology of electromagnetic flowmeter involves: Environmental protection, Measurement of fluid flow, Shipbuilding and marine structures in general, Installations in buildings, Telecommunication terminal equipment, Vocabularies, Kitchen equipment, Electrical engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Technical drawings, Electrical and electronic testing, Cinematography, Measurement of force, weight and pressure, Mechanical testing, Terminology (principles and coordination), Quality, Electronic components in general, Electromagnetic compatibility (EMC), Character sets and information coding, Domestic, commercial and industrial heating appliances.

RO-ASRO, Quality requirements and technology of electromagnetic flowmeter

STAS 11298-1980 ELECTROMAGNETIC FLOWMETERS General tehnical requirements for quality
STAS 11080-1978 DIRECT-CURRENT POTENTIO- METERS General technical requirements for quality
STAS 11396-1980 D. C. BRIDGES FOR MEASURING RESISTANCE General technical requirements for quality
STAS 7208-1983 DRIV1NG ELECTROMAGNETS Special technical requiremcnts for quality
STAS 12028-1981 DIRECT-CURRENT RESISTIVE VOLT General technical requirements for quality
STAS 8420-1986 TECHNICAL THERMOMETRES WITH ELECTRIC REZISTANCE General technical requirements for quality
STAS 12082-1982 LABORATORY A.C. RESISTORS General technical requirements for quality
STAS 10200-1975 ALTERNATING CURRENT GENERATORS FOR MOTOR VEHICLES Generals technical requirements for quality
STAS 11243-1979 LABORATORY D. C. REZISTORS General technical requirements for quality
STAS 2425-1984 LEVER SWITCHES UP TO 660 V a.c. and 1 000 A Technical requirements for quality
STAS 9565-1974 RADIO SHIELDING CHOKECOILS General technical requirements for quality
STAS 12000-1981 DIRECT CURRENT MILL MOTORS General technical requirements for quality
STAS 8273/0-1979 BALLASTS FOR GAZ DISCHARGE LAMPS General technical requirements for quality
STAS 10877-1977 UNRECORDED MAGNETIC TAPES FOR INSTRUMENTATIONAPPLICATIONS Technical requirements for quality
STAS 1564/1-1985 ALTERNATING CURRENT DISCONNECTORS FOR VOLTAGES ABOVE 1 KV General technical requirements for quality
STAS 4198-1979 ALTERNATING-CURRENT WATTHOUR AND VARHOUR METERS General teehnical requirements for quality
STAS 12756-1989 DIRECT CURRENT ELECTRICALENGINES FOR AIRCRAFT General technical requirements for quality
STAS 6391/1-1986 BUSHINGS FOR ALTERNAT1NG VOLTA GES ABOVE 1 kV General technical requirements for quality
STAS 9822/1-1992 Motorvehicles electrical equipments. Electromechanical peedometers. General technical requirements for quality
STAS 12765-1989 Automation devices and meanq| ELECTROMAGNETIC VALVES General technical requirements for quality
STAS 6391/2-1986 BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1 kV General technical requirements for quality
STAS 7352/2-1987 APARATUS FOR BLOOD PRESSURE MEASUREMENT WITH ELASTIC ELEMENT GAUGES General technical requirements for quality
STAS 8273/1-1979 Ballasts for gaz discharge lamps BALLASTS FOR LOW PRESSURE MERCURY LAMPS Special technical requirements for quality
STAS 8273/2-1979 Ballasts for gaz discharge lamps BALLASTS FOR HIGH PRESSURE MERCURY VAPOUR LAMPS Special technical requirements for quality
STAS 10940-1978 Information processing 7 TRACK, MAGNETIC TAPE RECORDED AT 8 rpmm. Technical requirements for quality.
STAS 10710-1980 PAPER LABELS FOR GLASS BOTTLES AND JARS General technical requirements for quality
STAS 3686/1-1974 CIRCUIT—BREAKEBS FOR ALTERNATING VOLTAGES ABOVE 1 kV General technical requirements for quality
STAS 9838-1982 LABORATORY TORSION DYNAMOMETERS CALIBRATION. Tecchnical rrquircments for quality
STAS 5679/2-1977 ElectricaI rotaling machincs for rail aiul road vehicles DIRECT CIRRENT MACHINES EOH AUXILIARY SERVICES Gencral technical reqiiircmcnts for quality
STAS 8273/3-1984 Ballasts for gaz discharge lamps BALLASTS FOR HIGH PRESSURE SODIUM VAPOUR LAMPS Special technical requirements for quality
STAS 7448/2-1980 REGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND RELATED PROCESSES Technical requirements for quality
STAS 8533-1985 FLUID POWER SYSTEMS COMPONENTS OF FLUID POWER SYSTEM General technical requirements for quality
STAS 12865-1990 Repairable contactors (Nothermetically sealed) for aircraft General technical requirements for quality
STAS 10915-1979 UNRECORDED MAGNETIC TAPES FOR INFORMATION INTERCHANGE USED AS AN INPUT/OUTPUT MEDIUM FOR COMPUTERS Technical requirements for quality
STAS 9655-1989 Petroleum equipment TORSION METER FOR TUBULAR GOODSQuality technical requirements
STAS 5674/2-1986 WOODEN REELS FOR WIRES CONDUITS AND CABLKS Quality tcchnical requirements
STAS 8666-1978 AUTOMATIC SMALL SWITCHES FOR WIRE PROTECTION IN a.c. ELECTRICWIRINGS UP TO 415 V AND 82 A General technical requirements for quality
STAS SR 11280-1993 Wire feeding devices for arc welding. General technical requirements for quality
STAS 7207-1984 CONTROL SWITCHES FOR CON- TROL CIRCUITS General technical requirements for quality
STAS 11099-1990 Electrical equipment for motor vehicles. Starters. General technical require ments for quality
STAS 12101/1-1992 Hidraulic fluid power. Orbital slow-speed engines Special technical requirements for quality
STAS 9728/2-1987 Airciafts FLAT STRIP FUSES UP TO 28 V DIRECT CURRENT Special technical requirements for quality
STAS 10218-1989 ELECTROCHEMICAL COATINGS OF TIN-NICKEL ALLOY Quality technical requirements
STAS 6719/2-1988 POL1GBAPHIC PRODUCTS MADE BY LETTERPRESS PRINTING PROCESS Quality techical requirements of prin?
STAS 7978-1988 Metallic coatings HARD CHROMIUM ELECTRO- CHEMICAL COATINGS Quality technical requirements
STAS 10094-1975 CAPACITORS FOR RADIO INTERFERENCE S UPPRESS ION General technical requirements for quality
STAS 2547-1980 FITTINGS FOR FIXING OF RAGTANGULAR BARS ON INTER- NAL SUPPORT-INSULATORS, UP TO 3000 A Technical requirements for quality
STAS 9603-1974 PASSIVE ELECTRONIC COMPONENTS General rules for inspecting technical requirements for quality
STAS 10270/1-1985 ELECTRICAL INCANDESCENT LAMPS FOR RAIL VEHICLES General technical requirements tor quality
STAS 1125/1-1991 Metals welding COVERED ELECTRODES FOR ARC WELDING General technical requirements for quality
STAS 1164/2-1979 CLASSIC V-BELTS For Power TRANSMISSION Technical general requirements for quality
STAS 445/1-1975 LEAD-ACID STORAGE BATTERIES WITH POSITIVE FORMED PLATES General tcchnical requirements for quality
STAS 555/4-1983 Screw caps for elcctrical incandescent /amps CAPS E 14 Special technical requiremenLs for quality
STAS 7148/1-1980 STEAM TURBINES FOR THE OPERATION OF ELECTRIC GENERATORS Functional parameters and technical requirements for quality
STAS SR ISO 3724:1993 Hdrauilc fiuid power. Filter elernents . Verification of flow fatigue charcteristics.
STAS SR 11852/4-1993 Load cells with tensorezistors for forces or masses measuring. Verification technical requirements

Professional Standard - Environmental Protection, Quality requirements and technology of electromagnetic flowmeter

HJ/T 367-2007 Technical requirement for environmental protection products. Electromagnetic pipe flowmeters
HJ 15-2019 Ultrasonic open channel sewage flowmeter technical requirements and testing methods

Group Standards of the People's Republic of China, Quality requirements and technology of electromagnetic flowmeter

T/CAEPI 67-2023 Technical Requirements for Portable (Magnetostrictive) Open Channel Flowmeters
T/CNHA 1061-2023 Quality Technical Requirements for Kitchen Appliances for Centralized Purchase and Similar Purposes integration (electromagnetism) cooking appliances
T/CFLP 0007-2017 Corrugated Boxes for Energy Measurement Instrument Size and Technical Requirement
T/CPSS 1010-2021 Power quality technical requirements for low-voltage AC distribution system of civil buildings
T/CFLP 0006-2017 Plastic Crates for Energy Measurement Instrument Size and Technical Requirement
T/CCSA 238.1-2018 Technical requirements and measurement methods for radio frequency and electromagnetic compatibility of wireless devices supported beidou —Part1: Electromagnetic compatibility
T/CNHA 1063-2023 Technical requirements for the quality of kitchen appliances for centralized procurement and similar purposes Integrated sink
T/CNHA 1060-2023 Quality and technical requirements for kitchen electrical appliances for centralized procurement and similar purposes range hood
T/CAMS 135-2023 Software Defined Collaborative Management and Control Network for Industrial Identification and Resolution Traffic Quality of Service Assurance Technical Requirements
T/CNHA 1062-2023 Quality and technical requirements for centralized procurement and similar kitchen appliances electric storage water heaters

RU-GOST R, Quality requirements and technology of electromagnetic flowmeter

GOST 28723-1990 Velocity electromagnetic and vortex flowmeters. General technical requirements and test methods
GOST 8.586.3-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements
GOST 8.586.2-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST R 8.909-2016 State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements
GOST 8.586.4-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements
GOST 28836-1990 Strain gauge load cells. General technical requirements and testings methods

PT-IPQ, Quality requirements and technology of electromagnetic flowmeter

NP 4360-1999 Meters for cold potable water Electromagnetic flowmeters. Terminology, definitions, technical characteristics and metrological characteristics

International Organization for Standardization (ISO), Quality requirements and technology of electromagnetic flowmeter

ISO 21562:2020 Ships and marine technology — Bunker fuel mass flow meters on receiving vessel — Requirements

CZ-CSN, Quality requirements and technology of electromagnetic flowmeter

CSN 25 7859-1990 Diaphragm gas meters. Fundamental parameters and technical requirements
CSN 35 6410-1984 D. C. bridges for measuring resistance. Tochnical requirements and testing methods.

Professional Standard - Electron, Quality requirements and technology of electromagnetic flowmeter

SJ/T 10664-1995 Technical requirements and measuring methods for e1ectromagnetic compatibility of telephone terminal

British Standards Institution (BSI), Quality requirements and technology of electromagnetic flowmeter

BS ISO 21562:2020 Ships and marine technology. Bunker fuel mass flow meters on receiving vessel. Requirements
19/30340762 DC BS ISO 21562. Ships and marine technology. Bunker fuel mass flow meters on receiving vessel. Requirements
BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments
BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems
BS CECC 210000:1995 Harmonized system of quality assessment for electronic components - Requirements for technology approval schedules (TAS)

YU-JUS, Quality requirements and technology of electromagnetic flowmeter

JUS M.B1.023-1983 Bolts, screvvs and studs with prescribed quality. Technical requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Quality requirements and technology of electromagnetic flowmeter

GB/T 29815-2013 The electromagnetic flowmeter based on HART protocol general technical specification

HU-MSZT, Quality requirements and technology of electromagnetic flowmeter

Professional Standard - Post and Telecommunication, Quality requirements and technology of electromagnetic flowmeter

YD/T 4271-2023 Technical requirements for automatic quality measurement of in-band flow information in telecom operators' networks

German Institute for Standardization, Quality requirements and technology of electromagnetic flowmeter

DIN SPEC 91411:2021 Requirements for the technical representation of magnetic measurement scales in design drawings

Association Francaise de Normalisation, Quality requirements and technology of electromagnetic flowmeter

NF C99-133-1*NF EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1 : requirements for measuring instruments
NF C41-109*NF EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems.

工业和信息化部, Quality requirements and technology of electromagnetic flowmeter

YD/T 3482-2019 Technical requirements for application security audit based on mobile network traffic

International Electrotechnical Commission (IEC), Quality requirements and technology of electromagnetic flowmeter

IEC 61786-1:2013 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments (Proposed Horizontal Standards)

Danish Standards Foundation, Quality requirements and technology of electromagnetic flowmeter

DS/EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems

AENOR, Quality requirements and technology of electromagnetic flowmeter

UNE-EN 62475:2012 High-current test techniques - Definitions and requirements for test currents and measuring systems

Korean Agency for Technology and Standards (KATS), Quality requirements and technology of electromagnetic flowmeter

KS C IEC 62475:2020 High-current test techniques — Definitions and requirements for test currents and measuring systems

KR-KS, Quality requirements and technology of electromagnetic flowmeter

KS C IEC 62475-2020 High-current test techniques — Definitions and requirements for test currents and measuring systems

Standard Association of Australia （SAA）, Quality requirements and technology of electromagnetic flowmeter

AS IEC 62475:2019 High-current test techniques — Definitions and requirements for test currents and measuring systems

Professional Standard - Radio Television Film, Quality requirements and technology of electromagnetic flowmeter

GY 40-1987 8.75mm film distribution copy factory technical quality requirements

Society of Automotive Engineers (SAE), Quality requirements and technology of electromagnetic flowmeter

SAE ARP1267-1973 Electromagnetic Interference Measurement Impulse Generators; Standard Calibration Requirements and Techniques

Lithuanian Standards Office , Quality requirements and technology of electromagnetic flowmeter

LST EN 62475-2011 High-current test techniques - Definitions and requirements for test currents and measuring systems (IEC 62475:2010)

GOSTR, Quality requirements and technology of electromagnetic flowmeter

GOST 29024-1991 Turbodimetric and nephelometric analysers of liquid. General technical requirements and testing methods