ZH
RU
ES

Development of regular testing

Development of regular testing, Total:329 items.

In the international standard classification, Development of regular testing involves: Road vehicles in general, Construction materials, Road engineering, Fluid storage devices, Testing of metals, Fuels, Acoustics and acoustic measurements, Non-destructive testing, Adhesives, Environmental protection, Vibrations, shock and vibration measurements, Paints and varnishes, Raw materials for rubber and plastics, Characteristics and design of machines, apparatus, equipment, Surface treatment and coating, Sensory analysis, Waxes, bituminous materials and other petroleum products, Rubber, Radiocommunications, Machine tools, Products of the chemical industry, Organic chemicals, Medical equipment, Radiation measurements, Refrigerating technology, Shop fittings, Metrology and measurement in general, Energy and heat transfer engineering in general, Pulps, Food products in general, Soil quality. Pedology, Structures of buildings, Internal combustion engines, Gas and steam turbines. Steam engines, Rubber and plastics products, Air quality, Petroleum products in general, Domestic electrical appliances in general, Edible oils and fats. Oilseeds, Water quality, Aerospace engines and propulsion systems, Transformers. Reactors, Glass, Leather technology, Textile fibres, Compressors and pneumatic machines, Diagnostic, maintenance and test equipment, Telecommunications in general, Tobacco, tobacco products and related equipment, Microbiology.

The American Road & Transportation Builders Association, Development of regular testing

AASHTO T 276-1997 Standard Method of Test for Developing Early-Age Compression Test Values and Projecting Later-Age Strengths

German Institute for Standardization, Development of regular testing

DIN 52013:1985 Testing of bitumen; determination of ductility
DIN EN ISO 16148:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection (ISO 16148:2006) English version of DIN EN ISO 16148:2006-08
DIN EN 15495:2008-02 Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources; German version EN 15495:2007
DIN EN 14584:2013-07 Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2013
DIN EN ISO 16148:2020-09 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016 + Amd 1:2020); German version EN ISO 16148:2016 + A1:2020
DIN 53675:1981 Testing of rubber; testing of latex; determination of volatile unsaturates
DIN EN 16074:2019 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
DIN EN 16074:2019-12 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials; German version EN 16074:2019
DIN 51444:2020-10 Testing of petroleum products - Determination of nitrogen - Oxidative combustion method with chemiluminescence detector
DIN 10968:2003 Sensory analysis - Determination and examination of the sensory minimum durability of foodstuffs
DIN 1996-19:1984 Testing of asphalt; determination of extensibility and adhesion using a Rabe joint model
DIN 51545:2023-10 Testing of lubricants and related products - Determination of the temperature stability of turbine oils / Note: Date of issue 2023-09-01
DIN EN 15495:2008 Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources; English version of DIN EN 15495:2008-02
DIN 54185:2021-06 Non-destructive testing - Thermographic testing - Lock-In thermography using optical excitation
DIN EN ISO 16148:2020 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016 + Amd 1:2020) (includes Amendment :2020)
DIN EN 13999-3:2009-08 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007+A1:2009
DIN EN 1543:1998-02 Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers; German version EN 1543:1998
DIN EN ISO 23088:2021-05 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020); German version EN ISO 23088:2020
DIN EN ISO 18763:2020-09 Soil quality - Determination of the toxic effects of pollutants on germination and early growth of higher plants (ISO 18763:2016); German version EN ISO 18763:2020
DIN 53757:1977 Testing of plastics articles; determination of the behaviour by stacking by long-time-test, boxes for transport and storage
DIN EN 14406:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution; German version EN 14406:2004
DIN EN ISO 8178-4:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996); German version EN ISO 8178-4:1996
DIN 51444:2003 Testing of petroleum products - Determination of nitrogen - Oxidative combustion method with chemiluminescence detector
DIN EN ISO 16148:2016 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016); German version EN ISO 16148:2016
DIN EN 13999-2:2014-03 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds; German version EN 13999-2:2013
DIN EN 13999-4:2009-08 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates; German version EN 13999-4:2007+A1:2009
DIN 51581-2:1997-05 Testing of petroleum products - Determination of evaporation loss - Part 2: Gas chromatographic method
DIN EN ISO 18763:2020 Soil quality - Determination of the toxic effects of pollutants on germination and early growth of higher plants (ISO 18763:2016)
DIN EN ISO 23088:2020 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1000 l (ISO 23088:2020); German and English version prEN ISO 23088:2020
DIN 53741:1971 Testing of Plastics; Determination of Volatile Aromatic Hydrocarbons in Polystyrene; Gas chromatographic Method
DIN EN 1440:2006 LPG equipment and accessories - Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection; English version of DIN EN 1440:2006-03
DIN 53902:2016 Testing of surface active agents - Determination of foaming power - Modified Ross-Miles-method
DIN 51390-4:2000 Testing of petroleum products - Determination of silicone content - Part 4: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
DIN 38407-2:1993 German standard methods for the determination of water, waste water and sludge; jointly determinable substances (group F); determination of low volatile halogenated hydrocarbons by gas chromatography (F 2)
DIN 53342:2023-10 Leather - Physical and mechanical tests - Determination of leather finishing fastness to ironing / Note: Date of issue 2023-09-22*Intended as replacement for DIN 53342 (1981-12).
DIN EN 13999-3:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007
DIN 51453:2023-10 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method / Note: Date of issue 2023-09-15*Intended as replacement for DIN 51453 (2004-10).
DIN EN ISO 11623:2003 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002); German version EN ISO 11623:2002
DIN EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019); Germ
DIN 53902-2:1977 Testing of surface active agents; determination of foaming power, modified Ross-Miles-method
DIN 52340-8:1995 Testing of glass - Chemical analysis of colourless soda-lime-glass - Part 8: Determination of Na<(Index)2>O and K<(Index)2>O by flame atomic emission spectroscopy (F AES)
DIN 53345-4:1978 Testing of fat liquors and greases for leather; methods of analysis, determination of the content of water vapor volatile, not with water miscible solvents
DIN EN 13999-4:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates; German version EN 13999-4:2007
DIN EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds; German version EN 13999-2:2007
DIN 38411-9:2001 German standard methods for the examination of water, waste water and sludge - Microbiological methods (group K) - Part 9: Determination of enterobacterial common antigen (ECA) for the detection of lactose-fermenting enterobacteriaceae (K 9)

HU-MSZT, Development of regular testing

ITE - Institute of Transportation Engineers, Development of regular testing

IR-134-E-2011 Recent Developments in Automated Pedestrian Detection: An ITE Informational Report

YU-JUS, Development of regular testing

JUS G.S2.042-1984 Leather testing. Determination of two- dimensional extension of leather
JUS H.P8.516-1986 Testing of pesticides. Determination of residue after evaporation
JUS H.Z8.055-1984 Testing of engine antifreezes. Determination ofash content
JUS F.S3.146-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of silk and wool or hair. Sulphuric method

American Society for Testing and Materials (ASTM), Development of regular testing

ASTM E1457-07 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM D1144-99(2016) Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM E3027-18 Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
ASTM E3027-18a Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
ASTM E3027-17 Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
ASTM E3027-16a Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
ASTM E3027-16 Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
ASTM E2737-10(2018) Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
ASTM UOP981-10 Trace Nitrogen in Liquid Hydrocarbons by Oxidative Combustion with Chemiluminescence Detection
ASTM D6178-14 Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
ASTM UOP791-16 Sulfur Components In LPG Fractions by GC-SCD
ASTM E1211/E1211M-12 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM E1211/E1211M-17 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM D5176-91(2003) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-91(1995) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-08 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D7184-12 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-13 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM E3323-21 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)

BE-NBN, Development of regular testing

NBN T 31-015-1985 Vulcanized rubbers - Determination of crack growth (De Mattia)

Association Francaise de Normalisation, Development of regular testing

NF E29-793:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection.
NF ISO 23876:2022 Bouteilles à gaz - Bouteilles et tubes composites - Essai par émission acoustique (EA) pour les contrôles et les essais périodiques
NF E29-793/A1*NF EN ISO 16148/A1:2020 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1
NF EN ISO 16148:2016 Bouteilles à gaz - Bouteilles à gaz rechargeables en acier sans soudure et tubes - Essais d'émission acoustique et examen ultrasonique complémentaire pour l'inspection périodique et l'essai
NF EN ISO 16148/A1:2020 Bouteilles à gaz - Bouteilles à gaz rechargeables en acier sans soudure et tubes - Essais d'émission acoustique et examen ultrasonique complémentaire pour l'inspection périodique et l'essai - Amendement 1
NF EN 13068-2:2000 Essais non destructifs - Contrôle par radioscopie - Partie 2 : contrôle de la stabilité à long terme des systèmes d'imagerie
NF E29-793*NF EN ISO 16148:2016 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
NF A09-353:1985 Non destructive testing. Acoustic emission. Determination of the characteristics of an acoustic emission channel.
NF EN 15495:2008 Essais non destructifs - Émission acoustique - Vérification des équipements métalliques sous pression pendant l'épreuve - Localisation par zone des sources d'EA
NF T37-002*NF EN 16074:2019 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
NF EN 14876:2007 Bouteilles à gaz transportables - Contrôles et essais périodiques des fûts à pression soudés en acier
NF A09-392*NF EN 15495:2008 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources.
NF EN 14584:2013 Essais non destructifs - Essais d'émission acoustique - Contrôle des équipements métalliques sous pression pendant l'épreuve - Localisation planaire des sources d'EA
NF E29-703:2020 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l
NF E37-218:2002 Internal combustion engines - Determination and method for the measurement of engine power - General requirements.
NF EN ISO 23088:2020 Bouteilles à gaz - Contrôles et essais périodiques des fûts à pression soudés en acier - Capacité inférieure ou égale à 1 000 l
NF EN ISO 18763:2020 Qualité du sol - Détermination des effets toxiques des polluants sur la germination et les premiers stades de croissance des végétaux supérieurs
NF M07-058:1992 Produits pétroliers - Dosage de l'azote total dans les distillats pétroliers - Méthode par combustion et détection par chimioluminescence.
NF M60-200-3*NF EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3 : applications to unfolding methods
NF T76-140-4*NF EN 13999-4+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4 : determination of volatile diisocyanates.
NF EN ISO 15303:2009 Corps gras d'origines animale et végétale - Détection et identification d'un contaminant organique volatil par CPG/SM
NF M88-714:2012 LPG equipment and accessories - Periodic inspection of transportable refillable LPG cylinders.
NF T90-124:2019 Water quality - Determination of the volatile hydrocarbon index - Head-space gas chromatographic method with flame ionisation detector
NF T51-785-2:1993 PLASTICS. DETERMINATION OF THE TENDENCY OF COMPOUDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES. PART 2 : PH METHOD.
NF ISO 11929-4:2022 Détermination des limites caractéristiques (seuil de décision, limite de détection et limites de l'intervalle élargi) pour le mesurage des rayonnements ionisants - Principes fondamentaux et applications - Partie 4 : lignes directrices relatives a...
NF T76-140-3*NF EN 13999-3+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes.
NF T76-140-3/IN1*NF EN 13999-3/IN1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes
NF S31-704-3*NF EN 60704-3:2006 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3 : procedure for determining and verifying declared noise emission values
NF T76-140-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds.
NF T76-140-2*NF EN 13999-2:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds
NF E35-411:1989 Refrigerating machine. Noise emitted by refrigeration equipments with compressors drived by external power unit called "open". Test code for measuring the sound power.
NF S31-067:1986 ACOUSTICS. DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES. PART 7 : SURVEY METHOD USING A REFERENCE SOUND SOURCE.

International Organization for Standardization (ISO), Development of regular testing

ISO 16148:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection
ISO/TS 19016:2019 Gas cylinders — Cylinders and tubes of composite construction — Modal acoustic emission (MAE) testing for periodic inspection and testing
ISO 23876:2022 Gas cylinders — Cylinders and tubes of composite construction — Acoustic emission examination (AT) for periodic inspection and testing
ISO 11623:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders
ISO 22516:2019 Paints and varnishes — Practical determination of non-volatile and volatile matter content during application
ISO 16148:2016 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
ISO 230-5:2000 Test code for machine tools - Part 5: Determination of the noise emisssion
ISO 16148:2016/Amd 1:2020 Gas cylinders — Refillable seamless steel gas cylinders and tubes — Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing — Amendment 1
ISO 18763:2016 Soil quality - Determination of the toxic effects of pollutants on germination and early growth of higher plants
ISO/TR 22694:2008 Gas cylinders - Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing
ISO 11929-3:2019 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: App
ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
ISO 8761:1989/cor 1:2009 Work-place air - Determination of mass concentration of nitrogen dioxide - Method using detector tubes for short-term sampling with direct indication; Technical Corrigendum 1
ISO 20418-2:2018 Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibres - Part 2: Peptide detection using MALDI-TOF MS

United States Navy, Development of regular testing

NAVY MIL-P-24534 A VALID NOTICE 1-1991 PLANNED MAINTENANCE SYSTEM: DEVELOPMENT OF MAINTENANCE REQUIREMENT CARDS, MAINTENANCE INDEX PAGES, AND ASSOCIATED DOCUMENTATION
NAVY MIL-P-24534 A-1985 PLANNED MAINTENANCE SYSTEM: DEVELOPMENT OF MAINTENANCE REQUIREMENT CARDS, MAINTENANCE INDEX PAGES, AND ASSOCIATED DOCUMENTATION

RU-GOST R, Development of regular testing

GOST R 52068-2003 Gasolines. Method for determination of oxidation stability (induction period)
GOST 33272-2015 System of product development and launching into manufacture. Procedure of establishment and extension of the appointed resource, service life and period of storage. Basic provisions

British Standards Institution (BSI), Development of regular testing

BS EN ISO 16148:2006 Gas cylinders - Refillable seamless gas cylinders - Acoustic emission testing (AT) for periodic inspection
21/30391147 DC BS ISO 23876. Gas cylinders. Cylinders and tubes of composite construction — Acoustic emission examination (AT) for periodic inspection and testing
PD ISO/TS 19016:2019 Gas cylinders. Cylinders and tubes of composite construction. Modal acoustic emission (MAE) testing for periodic inspection and testing
15/30309725 DC BS ISO 19016. Gas cylinders. Cylinders and tubes of composite construction. Modal acoustic emission (MAE) testing for periodic inspection and testing
BS EN 16074:2019 Paints and varnishes. Determination of non-volatile-matter content and spreading rate of coil coating materials
BS EN ISO 16148:2016+A1:2020 Gas cylinders. Refillable seamless steel gas cylinders and tubes. Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
BS EN ISO 16148:2016 Gas cylinders. Refillable seamless steel gas cylinders and tubes. Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
20/30399583 DC BS EN ISO 16148 AMD1. Gas cylinders. Refillable seamless steel gas cylinders and tubes. Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
BS EN ISO 23088:2020 Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1 000 l
BS ISO 11929-8:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
BS EN 15495:2007 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
BS EN ISO 5350-1:2006 Pulps. Estimation of dirt and shives. Inspection of laboratory sheets by transmitted light
19/30370578 DC BS ISO 23088. Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1 000 l
BS ISO 18763:2016 Soil quality. Determination of the toxic effects of pollutants on germination and early growth of higher plants
BS EN ISO 18763:2020 Soil quality. Determination of the toxic effects of pollutants on germination and early growth of higher plants
BS DD ENV 13999-3:2002 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile aldehydes
BS EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Fundamentals and application - Applications to unfolding methods
DD ENV 12260-1996 Water quality. Determination of nitrogen. Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection
BS DD ENV 13999-2:2002 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile organic compounds
BS DD ENV 13999-4:2002 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile diisocyanates
BS EN ISO 11269-2:2013 Soil quality. Determination of the effects of pollutants on soil flora. Effects of contaminated soil on the emergence and early growth of higher plants
BS EN ISO 15303:2001 Animal and vegetable fats and oils. Detection and identification of a volatile organic contaminant by GC/MS
BS EN ISO 15303:2008 Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminant by GC/MS
BS ISO 20418-2:2018 Textiles. Qualitative and quantitative proteomic analysis of some animal hair fibres - Peptide detection using MALDI-TOF MS
BS ISO 20730-2:2022 Road vehicles. Vehicle interface for electronic Periodic Technical Inspection (ePTI) - Application and communication requirements conformance test plan

Danish Standards Foundation, Development of regular testing

DS/EN ISO 16148:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection
DS/EN 15495:2008 Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
DS/EN 13068-2:2000 Non-destructive testing - Radioscopic testing - Part 2: Qualitative control and long term stability of imaging devices
DS/EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
DS/EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
DS/EN 14584:2013 Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
DS/EN 1543:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers
DS/EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
DS/EN ISO 23088:2021 Gas cylinders – Periodic inspection and testing of welded steel pressure drums – Capacities up to 1 000 l (ISO 23088:2020)
DS/EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
DS/EN 13999-3+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
DS/EN 27 574-3:1991 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines
DS/EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation – Fundamentals and application – Part 3: Applications to unfolding methods (ISO 11929-3:2019)
DS/EN 13999-4+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates

IAEA - International Atomic Energy Agency, Development of regular testing

NS-G-4.2-2006 Maintenance@ Periodic Testing and Inspection of Research Reactors

Lithuanian Standards Office , Development of regular testing

LST EN 14584-2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
LST EN 13068-2-2001 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
LST EN ISO 16148:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection (ISO 16148:2006)
LST EN 15495-2008 Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
LST EN 16074-2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
LST EN ISO 11623:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002)
LST EN 14876-2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
LST EN 1543-2000 Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers
LST EN ISO 23088:2021 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020)
LST EN 13999-2-2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
LST EN 13999-3-2007+A1-2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
LST EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019)
LST EN 13999-4-2007+A1-2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates
LST EN 300 973 V7.0.1-2000 Digital cellular telecommunications system (Phase 2+). Half rate speech. Voice Activity Detector (VAD) for half rate speech traffic channels (GSM 06.42 version 7.0.1 Release 1998)
LST EN 300 965 V7.0.1-2000 Digital cellular telecommunications system (Phase 2+). Full rate speech. Voice Activity Detector (VAD) for full rate speech traffic channels (GSM 06.32 version 7.0.1 Release 1998)

ES-UNE, Development of regular testing

UNE-EN 14584:2013 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
UNE-EN ISO 16148:2016 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016)
UNE-EN 16074:2020 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
UNE-EN ISO 16148:2016/A1:2021 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1 (ISO 16148:2016/Amd 1:2020)
UNE-EN ISO 23088:2021 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020)
UNE-EN ISO 18763:2020 Soil quality - Determination of the toxic effects of pollutants on germination and early growth of higher plants (ISO 18763:2016) (Endorsed by Asociación Española de Normalización in June of 2020.)

Korean Agency for Technology and Standards (KATS), Development of regular testing

KS B ISO 11623:2008 Transportable gas cylinders-Periodic inspection and testing of composite gas cylinders
KS B ISO 11623:2013 Transportable gas cylinders－Periodic inspection and testing of composite gas cylinders
KS I 2220-2010 Measuring method for volatile organic compounds in airborne by gas detector tube
KS A ISO 11929-8-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 8：Fundamentals and application to unfolding of spectrometric measurements without the influence of
KS I ISO 18763:2022 Soil quality — Determination of the toxic effects of pollutants on germination and early growth of higher plants
KS A ISO 11929-5:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 5:Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
KS A ISO 11929-5:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 5：Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
KS H ISO 15303-2008(2018) Animal and vegetable fats and oils－Detection and identification of a volatile organic contaminant by GC/MS
KS R ISO 8178-4:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 4：Test cycles for different engine applications
KS I ISO 8760:2019 Work-place air ― Determination of mass concentration of carbon monoxide ― Method using detector tubes for short-term sampling with direct indication
KS I ISO 8761:2019 Work-place air ― Determination of mass concentration of nitrogen dioxide ― Method using detector tubes for short-term sampling with direct indication
KS C IEC 60704-3:2002 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances-Part 3:Procedure for determining and verifying declared noise emission values
KS C IEC 60704-3:2015 Household and similar electrical appliances — Test code for the determination of airborne acoustical noise — Part 3: Procedure for determining and verifying declared noise emission values
KS K ISO 20418-2:2022 Textiles — Qualitative and quantitative proteomic analysis of some animal hair fibres — Part 2: Peptide detection using MALDI-TOF MS

IETF - Internet Engineering Task Force, Development of regular testing

RFC 7884-2016 OSPF Extensions to Advertise Seamless Bidirectional Forwarding Detection (S-BFD) Target Discriminators
RFC 7330-2014 Definitions of Textual Conventions (TCs) for Bidirectional Forwarding Detection (BFD) Management

CEN - European Committee for Standardization, Development of regular testing

EN 14584:2005 Non-destructive testing - Acoustic emmission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
EN ISO 16148:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection
PREN 16074-2018 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Development of regular testing

ASHRAE AC-02-19-3-2002 Methodology Development for Determining Long-Term Performance of Cool Storage Systems from Short-Term Tests (RP-1004)

AENOR, Development of regular testing

UNE-EN 15495:2008 Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
UNE-EN 1968:2003 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders.
UNE-EN 13068-2:2000 Non-destructive testing. Radioscopic testing. Part 2: Check of long term stability of imaging devices.
UNE-EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
UNE-EN 1803:2003 Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders.
UNE-EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
UNE-EN 1543:1999 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. DETERMINATION OF TENSILE STRENGTH DEVELOPMENT FOR POLYMERS.
UNE-EN 13999-2:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
UNE-EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
UNE-EN 13999-4:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates

GOSTR, Development of regular testing

GOST R 58670-2019 United power system and isolated power systems. Planning of power systems development. Calculations of electric power regimes and determination of technical solutions in long-range development of power systems. Norms and requirements
GOST R ISO 18763-2019 Soil quality. Determination of the toxic effects of pollutants on germination and early growth of higher plants
GOST R 50.05.20-2019 Conformity assessment system for the use of nuclear energy. Non-destructive examination of metal of nuclear power plant equipment and pipelines. The procedure of justification of volumes and periodicities

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Development of regular testing

GB/T 43144-2023 Non-destructive testing acoustic emission testing method for damage assessment of reinforced concrete beams
GB/T 23909.2-2009 Non-destructive testing.Radioscopic testing.Part 2:Check of long term stability of imaging devices
GB/T 21356-2008 Non-destructive testing.Qualification and long-term stability of computed radiology systems
GB/T 32371.2-2015 Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application.Part 2:Determination of volatile organic compound
GB/T 32371.4-2015 Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application.Part 4:Determination of volatile diisocyanates
GB/T 32371.3-2015 Methods for short-term measurement of release properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes

European Committee for Standardization (CEN), Development of regular testing

EN 13068-2:1999 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
EN ISO 22516:2020 Paints and varnishes - Practical determination of non-volatile and volatile matter content during application (ISO 22516:2019)
EN ISO 16148:2016 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
EN ISO 16148:2016/A1:2020 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1 (ISO 16148:2016/Amd 1:2020)
EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
EN 14584:2013 Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
EN 15495:2007 Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
EN 13486:2001 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification
DD ENV 12 260-1996 Water Quality - Determination of Nitrogen - Determination of Bound Nitrogen, After Combustion and Oxidation to Nitrogen Dioxide, Using Chemiluminescence Detection
EN ISO 18763:2020 Soil quality - Determination of the toxic effects of pollutants on germination and early growth of higher plants (ISO 18763:2016)
EN ISO 5350-1:1998 Pulp - Estimation of Dirt and Shives - Part 1: Inspection of Laboratory Sheets ISO 5350-1:1998
EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019)
DD ENV 13999-3-2002 Adhesives Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Part 3: Determination of volatile aldehydes
EN ISO 8178-4:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 4: Test Cycles for Different Engine Applications ISO 8178-4: 1996
EN ISO 5350-1:2006 Pulp - Estimation of Dirt and Shives - Part 1: Inspection of Laboratory Sheets
EN 27574-2:1988 Acoustics Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment Part 2: Methods for Stated Values for Individual Machines
DD ENV 13999-2-2002 Adhesives Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Part 2: Determination of volatile organic compounds
DD ENV 13999-4-2002 Adhesives Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Part 4: Determination of volatile diisocyanates
EN ISO 11269-2:2013 Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of contaminated soil on the emergence and early growth of higher plants

GM Global, Development of regular testing

GMW 15654-2013 Determination of Volatile and Semi-Volatile Organic Compounds from Vehicle Interior Air Issue 3; English

PL-PKN, Development of regular testing

PN-EN ISO 16148-2016-08/A1-2020-11 E Gas cylinders -- Refillable seamless steel gas cylinders and tubes -- Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing -- Amendment 1 (ISO 16148:2016/Amd 1:2020)
PN-EN ISO 23088-2021-05 E Gas cylinders -- Periodic inspection and testing of welded steel pressure drums -- Capacities up to 1 000 l (ISO 23088:2020)
PN-EN ISO 11929-3-2021-07 E Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and application -- Part 3: Applications to unfolding methods (ISO 11929-3:2019)

European Telecommunications Standards Institute (ETSI), Development of regular testing

ETSI TR 136 903-2012 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Derivation of test tolerances for Radio Resource Management (RRM) conformance tests V9.2.0; 3GPP TR 36.903 version 9.2.0 Release 9;
ETSI TR 136 903-2011 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Derivation of test tolerances for multi-cell Radio Resource Management (RRM) conformance tests V8.0.0; 3GPP TR 36.903 version 8.0.0 Release 8; Includes Diskette

US-FCR, Development of regular testing

FCR COE CERC-95-19-1995 PERIODIC INSPECTION OF JETTIES AT MANASQUAN INLET, NEW JERSEY REPORT 1 ARMOR UNIT MONITORING FOR PERIOD 1984-1994

Standard Association of Australia （SAA）, Development of regular testing

AS 1683.18:2001 Methods of test for rubber - Determination of flex cracking and crack growth of vulcanized or thermoplastic rubber (De Mattia)
AS 2337.3:2006/Amdt 1:2007
AS 2337.3:2020 Gas cylinder test stations, Part 3: Transportable gas cylinders — Periodic inspection and testing of composite cylinders (ISO 11623:2015, MOD)
AS 2434.2:2002(R2013)

ZA-SANS, Development of regular testing

SANS 11623:2006 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders
SANS 1825:2005 Gas container test stations - General requirements for periodic inspection and testing of portable and transportable refillable gas containers

Electrostatic Discharge Association (ESDA), Development of regular testing

ANSI/ESD SP3.4-2012 Periodic Verification of Air Ionizer Performance Using a Small Test Fixture

International Telecommunication Union (ITU), Development of regular testing

ITU-R SM.1270-1997 Additional Information for Monitoring Purposes Related to Classification and Designation of Emission

Professional Standard - Non-ferrous Metal, Development of regular testing

YS/T 63.17-2006 Carbonaceous materials used in the production of aluminium. Part 17:Determination of volatile matter content
YS/T 587.3-2007 Calcined coke for Prebaked blocks.Testing methods.Part 3: Determination of volatile matter content

工业和信息化部, Development of regular testing

YS/T 63.17-2019 Testing methods for carbon materials used in aluminum - Part 17: Determination of volatile matter

BR-ABNT, Development of regular testing

ABNT NBR 16926-2020 Non destructive testing - Acoustic emission - Detection and location of acoustic emissions from partial discharges and mechanical faults in gas insulated switchgear (GIS)

CH-SNV, Development of regular testing

SN EN ISO 16148/A1:2020 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016/Amd 1:2020); Amendment A1
SN EN ISO 23088:2021 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1000 l (ISO 23088:2020)
SN EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019)

IT-UNI, Development of regular testing

UNI EN ISO 23088:2021 Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l
UNI EN ISO 18763:2020 Soil quality - Determination of the toxic effects of pollutants on germination and early growth of higher plants
UNI EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods

ES-AENOR, Development of regular testing

Professional Standard - Commodity Inspection, Development of regular testing

SN/T 0541.4-1996 Inspecting method for import and export standard rubber.Determination of volatile content
SN/T 0541.4-2010 Inspection for import and export standard rubber.Part 4:Determination of volatile matter content

Association of German Mechanical Engineers, Development of regular testing

VDI 2048 Blatt 3-2012 Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially preparation of acceptance tests of a gas and steam power plant
VDI 2048 Blatt 2-2003 Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially retrofit measures
VDI 3481 Blatt 3-1995 Gaseous emission measurement - Determination of volatile organic compounds, especially solvents, flame ionization detector (FID)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Development of regular testing

GB/T 35867-2018 Inspection of grain and oils—Determination of phospholipids content in lecithins—high performance liquid chromatography using a light-scattering detector

US-CFR-file, Development of regular testing

CFR 24-3282.307-2013 Housing and Urban Development. Part3282:Manufactured home procedural and enforcement regulations. Section3282.307:onitoring inspection fee establishment and distribution.
CFR 46-61.40-2014 Shipping. Part61:Periodic tests and inspections. Subpart61.40:Design verification and periodic testing of vital system automation. Section61.40-10:Test procedure details.

KR-KS, Development of regular testing

KS I ISO 18763-2022 Soil quality — Determination of the toxic effects of pollutants on germination and early growth of higher plants
KS M ISO 23811-2012 Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical
KS I ISO 8761-2019 Work-place air ― Determination of mass concentration of nitrogen dioxide ― Method using detector tubes for short-term sampling with direct indication
KS I ISO 8760-2019 Work-place air ― Determination of mass concentration of carbon monoxide ― Method using detector tubes for short-term sampling with direct indication
KS K ISO 20418-2-2022 Textiles — Qualitative and quantitative proteomic analysis of some animal hair fibres — Part 2: Peptide detection using MALDI-TOF MS

Professional Standard - Electricity, Development of regular testing

DL/T 590-1996 Directives of thermal instrumentation and control for condensation type turbine in power plant

未注明发布机构, Development of regular testing

DIN EN ISO 23088:2021 Gas cylinders – Periodic inspection and testing of welded steel pressure drums – Capacity up to 1,000 l (ISO 23088:2020)

Engineering Equipment and Materials Users Association （EEMUA), Development of regular testing

EEMUA PUB NO 231-2012 The mechanical integrity of plant containing hazardous substances - A guide to periodic examination and testing (Edition 1)

EEMUA - Engineering Equipment and Materials Users Association, Development of regular testing

PUB NO 231-2012 The mechanical integrity of plant containing hazardous substances - A guide to periodic examination and testing (Edition 1)

National Metrological Verification Regulations of the People's Republic of China, Development of regular testing

JJG(核工) 11-1991 Method for measuring emissivity of α, β planar sources with 2π multi-wire proportional counter
JJG(核工) 16-1991 Test method for measuring surface emissivity of α-plane source by grid ionization chamber standard device

国家能源局, Development of regular testing

NB/SH/T 0991-2019 Determination of aniline compounds in gasoline by gas chromatography-nitrogen chemiluminescence detection method

Professional Standard - Energy, Development of regular testing

NB/SH/T 6014-2020 Determination of Nitrogenous Compounds in Middle Distillates by Gas Chromatography-Nitrogen Chemiluminescence Detection
NB/SH/T 6032-2021 Determination of Sulfur-Containing Compounds in Middle Distillates by Gas Chromatography—Sulfur Chemiluminescence Detection
NB/SH/T 0919-2015 Standard test method for determination of sulfur compounds in gaseous fuels and natural gas by gas chromatography and chemiluminescence

International Electrotechnical Commission (IEC), Development of regular testing

IEC 60704-3:1992 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances; part 3: procedure for determining and verifying declared noise emission values
IEC 60704-3:2006 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values

AT-ON, Development of regular testing

ONORM M 5924-1985 Heat cost distributors by evaporation of liquids; terms and definitions, requirements, testing, marking of conformity
OENORM EN ISO 11929-3:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Development of regular testing

PREN 2558-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Percentage of Volatile Matter (Issue P 1)

Society of Automotive Engineers (SAE), Development of regular testing

SAE AIR4979A-2012 Estimation of Measurement Uncertainty in Engine Tests Based on Nato Agard Uniform Engine Test Program

ESD - ESD ASSOCIATION, Development of regular testing

SP3.4-2012 The Protection of Electrostatic Discharge Susceptible Items - Periodic Verification of Air Ionizer Performance Using a Small Test Fixture

Tianjin Provincial Standard of the People's Republic of China, Development of regular testing

DB12/T 199-2004 Qualitative detection method of genetically modified ingredients in fermented products such as soy sauce with soybean as raw material

Professional Standard - Agriculture, Development of regular testing

卫法监发〔2001〕159号 Notice on Printing and Distributing Test Methods for Determination of Benzoyl Peroxide in Flour and Oil
水产品质量安全检验手册 7.5.2.0-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 5 Determination of Chromogenic Agents in Aquatic Products 2. Determination of Nitrate--Cadmium Column Method (GBT 5009.33-2003)
水产品质量安全检验手册 7.5.1.2-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 5 Determination of Chromogenic Agents in Aquatic Products 1. Determination of Nitrite (GBT 5009.33-2003) (2) Oscillopolarographic method
水产品质量安全检验手册 8.2.3.0-2005 Chapter 8 Inspection of Other Hazardous Substances in Aquatic Products Section 2 Determination of Formaldehyde in Aquatic Products 3. Determination of Residual Formaldehyde in Water-Soaked (Stained) Food
水产品质量安全检验手册 7.5.1.1-2005 Chapter 7 Inspection of additives in aquatic products Section 5 Determination of chromogenic agents in aquatic products 1. Determination of nitrite (GBT 5009.33-2003) (1) Naphthalene ethylenediamine hydrochloride method

Natural Gas Processor's Association (NGPA), Development of regular testing

GPA STD 2199-1999 Determination of Specific Sulfur Compounds by Capillary Gas Chromatography and Sulfur Chemiluminescence Detection

VDI - Verein Deutscher Ingenieure, Development of regular testing

VDI 4208 BLATT 2 BERICHTIGUNG-2019 Anforderungen an Stellen bei der Ueberwachung von Emissionen an Kleinfeuerungsanlagen - Stellen fuer wiederkehrende Ueberpruefungen von eignungsgeprueften Messgeraeten - Berichtigung zur Richtlinie VDI 2048 Blatt 2:2019-01

Institute of Electrical and Electronics Engineers (IEEE), Development of regular testing

IEEE Std C57.127-2007 IEEE Guide for the detection and location of acoustic emissions from partial discharges in oil-immersed power transformers and reactors
IEEE Std C57.127-2018 IEEE Guide for the Detection, Location and Interpretation of Sources of Acoustic Emissions from Electrical Discharges in Power Transformers and Power Reactors
IEEE PC57.127/D3, October 2017 IEEE Draft Guide for the Detection, Location and Interpretation of Sources of Acoustic Emissions from Electrical Discharges in Power Transformers and Power Reactors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Development of regular testing

IEEE C57.127-2018 Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors
IEEE C57.127-2007 Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors

RO-ASRO, Development of regular testing

STAS SR EN 27574-2-1994 Acoustics —Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Part 2: Methods for stated for individual machines

ETSI - European Telecommunications Standards Institute, Development of regular testing

ETSI EN 300 965:2000 Digital Cellular Telecommunications System (Phase 2+); Full Rate Speech; Voice Activity Detector (VAD) for Full Rate Speech Traffic Channels (GSM 06.32 Version 8.0.1 Release 1999)

国家市场监督管理总局、中国国家标准化管理委员会, Development of regular testing

GB/T 38203-2019 Determination of fatty acid methyl esters(FAME) in aviation turbine fuel—HPLC evaporative light scattering detector method

NL-NEN, Development of regular testing

NEN-ISO 9455-1:1994 Soft soldering fluxes. Test methods. Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:1990)

Professional Standard - Tobacco, Development of regular testing

YC/T 447-2012 Tobacco and tobacco products.Determination of maltose, sucrose, glucose, fructose.High performance liquid chromatography-evaporative light scattering detection method