ZH
RU
ES

Thermoplastic brittleness test

Thermoplastic brittleness test, Total:497 items.

In the international standard classification, Thermoplastic brittleness test involves: Fuels, Pipeline components and pipelines, Insulating fluids, Plastics, Analytical chemistry, Valves, Environmental protection, Rubber, Cellular materials, Protection against fire, Welding, brazing and soldering, Rubber and plastics products, Insulating materials, Aircraft and space vehicles in general, Installations in buildings, External sewage systems, Standardization. General rules, Adhesives, Paints and varnishes, Agricultural machines, implements and equipment, Packaging materials and accessories, Wastes, Processes in the food industry, Products of the chemical industry, Raw materials for rubber and plastics, Printed circuits and boards, Industrial furnaces, Farm buildings, structures and installations, Road vehicles in general, Company organization and management, Road engineering, Reinforced plastics, Sacks. Bags, External water conveyance systems.

BE-NBN, Thermoplastic brittleness test

NBN T 42-410-1981 Thermoplastic pipes - Determination of the resistance to fragile crack propagation (Robertson test)
NBN-EN 28659-1992 Thermoplastic valves - Fatigue strength - Test method

Association Francaise de Normalisation, Thermoplastic brittleness test

NF ISO 812:2017 Caoutchouc vulcanisé ou thermoplastique - Détermination de la fragilité à basse température
NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF T51-074:1986 Plastics. Fire behaviour. Hot wire test.
NF T54-411*NF EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
NF T54-084*NF EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method
NF EN ISO 2505:2005 Tubes en matières thermoplastiques - Retrait longitudinal à chaud - Méthodes d'essai et paramètres
NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
NF T51-400*NF EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests.
NF EN ISO 8659:2020 Robinets en matériaux thermoplastiques - Résistance à la fatigue - Méthode d'essai
NF T46-018:2011 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness.
NF T54-100*NF EN 1705:1997 Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.
NF T46-018*NF ISO 812:2017 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
NF T54-927*NF EN ISO 13263:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
NF T54-901*NF EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
NF T54-082:1988 Plastics. Thermoplastic and thermosetting valves. Test of resistance to pressure.
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF EN ISO 6259-1:2015 Tubes en matières thermoplastiques - Détermination des caractéristiques en traction - Partie 1 : méthode générale d'essai
NF A89-810-4:2002 Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.
NF A89-810-4*NF EN 12814-4:2018 Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test
NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
NF ISO 4665:2016 Caoutchouc vulcanisé ou thermoplastique - Résistance aux intempéries
NF T54-202:2002 Silage thermoplastic films.
NF T76-320*NF EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
NF T54-411:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods.
NF T54-955-1:2002 Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method.
NF T54-955-1*NF EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method
NF T50-005-2:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: preparation of test specimens and determination of properties
NF A89-810-5*NF EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination
NF A89-810-3/A1:2006 Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.
NF EN 12814-3:2014 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 3 : essai de fluage en traction
NF A89-810-8:2002 Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.
NF ISO 18766:2014 Caoutchouc vulcanisé ou thermoplastique - Essais à basses températures - Introduction générale et lignes directrices
NF T51-294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2 : small tensile bars.

IT-UNI, Thermoplastic brittleness test

UNI 5812-1966
UNI EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
UNI 4285-1959
UNI EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements

British Standards Institution (BSI), Thermoplastic brittleness test

BS ISO 812:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS 2782-11 Method 1112A:1989 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for non-pressure applications
BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method
BS EN ISO 8659:2020 Tracked Changes. Thermoplastics valves. Fatigue strength. Test method
BS ISO 812:2009 Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
BS ISO 812:2011 Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
BS EN 917:1997 Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness
BS 2782 Pt.1 Method 115A:1978 Methods of testing plastics. Thermal properties. Plastic yield
BS ISO 974:2000 Plastics - Determination of the brittleness temperature by impact
BS ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
BS EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
BS ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
BS EN 28233:1992 Thermoplastics valves. Torque. Test method
BS EN ISO 7808:1993 Plastics. Thermosetting moulding materials. Determination of transfer flow
BS 2782-1 Methods 134A and 134B:1992 Methods of testing plastics - Thermal properties - Determination of the oxidation induction time of thermoplastics
BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
BS EN ISO 13263:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
BS EN 14932:2006 Plastics — Stretch thermoplastic films for wrapping bales - Requirements and test methods
BS EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
BS EN 14932:2018 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
BS EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications. Test method for watertightness
BS 2782-11 Method 1101A:1981 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Measurement of dimensions of pipes
BS ISO 19892:2011 Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
BS EN ISO 22007-1:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 11897:2001 Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds

Japanese Industrial Standards Committee (JISC), Thermoplastic brittleness test

JIS K 6814:2008 Thermoplastics pipes -- Thermal reversion test method
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7206:1991 Testing method for Vicat softening temperature of thermoplastics
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 6911:1995 Testing methods for thermosetting plastics
JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS A 5709:1979 Thermoplastic bathtubs
JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS K 7199:1991 Testing method for flow properties of thermoplastics with a capillary rheometer
JIS K 5981:1992 Thermoplastic and thermosetting powder coating films
JIS K 6937-2:2002 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS K 6911 AMD 1:2006 Testing methods for thermosetting plastics (Amendment 1)
JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
JIS K 6816:2008 Thermoplastics pipes and fittings -- Test method for Vicat softening temperature
JIS K 7212:1995 General rules for tests for thermal ageing properties of thermoplastics in the form of sheet by means of ovens

Korean Agency for Technology and Standards (KATS), Thermoplastic brittleness test

KS C 2006-1998(2018)
KS M 3059-2008 Test method for brittleness temperature of plastics and elastomers by impact
KS M 3059-1993 Test method for brittleness temperature of plastics and elastomers by impact
KS M ISO 6187:2010 Rigid cellular plastics－Determination of friability
KS M 3071-2004 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M 3015-2003 Testing methods for thermosetting plastics
KS M 3070-2011 Testing method for melt flow rate of thermoplastics
KS M 3070-1986 Testing method for melt flow rate of thermoplastics
KS M ISO 974:2022 Plastics — Determination of the brittleness temperature by impact
KS M ISO 812:2019 Rubber, vulcanized or thermoplastic —Determination of low-temperature brittleness
KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS C 2006-1998 Testing method for ball pressure of thermoplastics
KS M 3004-2008 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M ISO 1167:2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure-Test method
KS M ISO 1167:2014 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure-Test method
KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
KS M ISO 1167-2003(2008) Thermoplastics pipes for the conveyance of fluids－Resistance to internal pressure－Test method
KS M 3015-2003(2018)
KS M ISO 6259-1-2016(2021) Thermoplastics pipes－Determination of tensile properties－Part 1：General test method
KS M ISO 7792-2-2013(2018) Plastics ㅡ Thermoplastic polyester(TP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M 3529-2008 Polyethylene(PE) valves for water distribution systems
KS M ISO 4065:2022 Thermoplastics pipes — Universal wall thickness table
KS M ISO 4899-2002(2017) Tixtile－glass－reinforced thermosetting plastics－Properties and test methods
KS M ISO 4899-2002(2022) Tixtile－glass－reinforced thermosetting plastics－Properties and test methods
KS M ISO 13968:2020 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermoplastic brittleness test

GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 1035-1970 Test method for thermostability of plastics(Martin)
GB/T 18042-2000 Thermoplastics pipes-Determination of creep ratio
GB/T 27726-2011 Thermoplastics valves.Pressure test methods and requirements
GB/T 27725-2011 Butterfly valves of thermoplastics materials
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB/T 28494-2012 Globe valves of thermoplastics materials
GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
GB/T 15256-2014 Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness(multiple test piece method)
GB/T 14152-2001 Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method
GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials
GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure--Test method
GB/T 8804.1-2003 Thermoplastic pipes--Determination of tensile properties--Part 1: General test method
GB/T 31402-2015 Plastics.Measurement of antibacterial activity on plastics surfaces
GB/T 1670-2008 Plasticizers-test method of heat-resistance
GB/T 2407-1980 Plastics--Combustion performance test--Blazing rod method
GB/T 5472-1985 Test method for rectangular flow cure properties of thermosetting moulding compounds
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
GB/T 18743-2002 Thermoplastics pipes for the transport of fluids--Determination of impact by the charpy method

GM Daewoo, Thermoplastic brittleness test

GMKOREA EDS-T-7730-2011

Taiwan Provincial Standard of the People's Republic of China, Thermoplastic brittleness test

CNS 13786-1996 Method of Test for Brittleness Temperature of Plastics
CNS 12627-1989 General Rules for Tests for Thermal Ageing Properties of Thermoplastics in the Form of Sheet by Means of Ovens
CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer
CNS 4395-1978 Compression Moulding Test Specimens of Thermoplastic Materials
CNS 4394-1978 Injection Moulding Test Specimens of Thermoplastic Material

Professional Standard - Petrochemical Industry, Thermoplastic brittleness test

SH/T 1541-2006 Test method for appearance of thermoplastic granules
SH/T 1541-1993 Appearance Test Method of Thermoplastic Granules

International Organization for Standardization (ISO), Thermoplastic brittleness test

ISO 8233:1988 Thermoplastics valves; torque; test method
ISO/FDIS 8233:2023 Thermoplastics valves — Torque — Test method
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 6187:2001 Rigid cellular plastics - Determination of friability
ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 812:2006 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
ISO 8659:1989 Thermoplastics valves; fatigue strength; test method
ISO 8659:2020 Thermoplastics valves — Fatigue strength — Test method
ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
ISO 13254:2010 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 1167:1996 Thermoplastics pipes for the conveyance of fluids - Resistance to internal pressure - Test method
ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
ISO 812:2011 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
ISO/DIS 8233 Thermoplastics valves — Torque — Test method
ISO/DIS 2505 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
ISO 8361-1:1991 Thermoplastics pipes and fittings; water absorption; part 1: general test method
ISO 19893:2011 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 7808:1992 Plastics; thermosetting moulding materials; determination of transfer flow
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 7349:1983 Thermoplastics valves; Connection references
ISO 294-2:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars

Danish Standards Foundation, Thermoplastic brittleness test

DS/EN 28233:2003 Thermoplastics valves - Torque - Test method
DS/EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DS/EN 917:1998 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
DS/EN 1705:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
DS/EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
DS/EN ISO 2505:2006 Thermoplastics pipes - Longitudinal reversion - Test method and parameters
DS/EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
DS/EN 12814-2:2021 Testing of welded joints of thermoplastics semi-finished products – Part 2: Tensile test
DS/EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
DS/EN 12814-1/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
DS/EN 12814-1:2000 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
DS/EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
DS/EN 12814-4:2001 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
DS/EN 12814-8:2021 Testing of welded joints of thermoplastics semi-finished products – Part 8: Requirements
DS/EN ISO 6259-1:2002 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
DS/EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
DS/EN 13067:2013 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
DS/EN 1871:2020 Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties
DS/INSTA 219:1990 Plastics pipes. Sealing rings of thermoplastic elastomers
DS/EN ISO 16135:2006 Industrial valves – Ball valves of thermoplastics materials
DS/EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials
DS/EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials
DS/EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
DS/EN 12814-3/A1:2005 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
DS/EN 12814-3:2000 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
DS/EN 12814-8/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
DS/EN 12814-8:2001 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
DS/EN 14830:2007 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

未注明发布机构, Thermoplastic brittleness test

BS EN 28233:1992(2000) Thermoplastics valves — Torque — Test method
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
BS EN ISO 13254:2017(2018) Thermoplastics piping systems for non - pressure applications - Test method for watertightness
BS EN 763:1995(1999)*BS 2782-11 MTD 01103A-B:1995 Plastics piping and ducting systems — Injection - moulded thermoplastics fittings — Test method for visually assessing effects of heating
BS EN ISO 13263:2017(2018) Thermoplastics piping systems for non - pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates

Standard Association of Australia （SAA）, Thermoplastic brittleness test

AS 4828.2:2008 Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test
AS 4828.4:2008 Degradability of plastics - Methods of test - Test method for heat aging of degradable plastics

American Society for Testing and Materials (ASTM), Thermoplastic brittleness test

ASTM D746-98e1 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D746-20 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D1238-90b Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-85 Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-04a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-04c Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-01e1 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-00 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D5630-94 Standard Test Method for Ash Content in Thermoplastics
ASTM D5630-01 Standard Test Method for Ash Content in Thermoplastics
ASTM D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D1238-23 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D2463-10a Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-95 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-95(2001) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-95(2005) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-10 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D2463-10b Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D746-04 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D746-13 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D746-14 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D2837-11 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM D2837-13 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM D2837-13e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D5927-03 Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
ASTM D955-08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

Professional Standard - Agriculture, Thermoplastic brittleness test

GB/T 1633-1979 Test method for softening point (Vicat) of thermoplastics

VN-TCVN, Thermoplastic brittleness test

TCVN 2229-2007 Rubber,vulcanized or thermoplastic.Accelerated ageing and heat resistance test
TCVN 6148-2007 Thermoplastics pipes.Longitudinal reversion.Test method and parameters
TCVN 7434-1-2004 Thermoplastics pipes.Determination of tensile properties.Part 1: General test method
TCVN 5321-2007 Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness

PT-IPQ, Thermoplastic brittleness test

E 278-1973
E 279-1973
NP EN 917-2000 Plastics piping systems Thermoplastics valves Test methods for resistance to internal pressure and leaktightness

AT-ON, Thermoplastic brittleness test

ONORM M 7861 Teil.5-1987 Testing of welded joints in thermoplastics; bending test
ONORM EN 28233-1991 Thermoplastics valves -Torque - Test method (ISO 8233:1988)
ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
ONORM EN 28659-1991 Thermoplastlcs valves - Fatigue strength - Test method (ISO 8659:1989)
OENORM EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
OENORM EN 1871-2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
ONORM M 7865-1990 Welding filier materials for thermoplastics; requirements, marking, tests
OENORM EN ISO 2505:2021 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO/DIS 2505:2021)
OENORM EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements

Association of German Mechanical Engineers, Thermoplastic brittleness test

DVS 2203-2-1985 Testing of welded joints of thermoplastics; tensile test
DVS 2203-4-1985
DVS 2203-3-1985 Testing of welded joints of thermoplastics; tensile impact test
DVS 2204-1-2010
DVS 2204-1-2011 Adhesive bonding of thermoplastics
DVS 2203-5-1999 Testing of welded joints ofthermoplastics plates and tubes - Technological bend test
DVS 2203-1 Beiblatt 1-2003 Testing of welded joints of thermoplastics sheet and pipes - Requirements - Tensile test
DVS 2203-1-2003 Testing of welded joints of thermoplastics sheet and pipes - Test methods - Requirements
DVS 2203-4-1997 Testing of welded joints of thermoplastics plates and tubes - Tensible creep test
DVS 2243-2005
DVS 2243-2013
DVS 2243-2003
DVS 2204-4-1981 Glueing of thermoplastics; polyamides
DVS 2243-2014
DVS 2211-1979 "Filler materials for thermoplastics - Scope, designation, requirements, tests"

United States Navy, Thermoplastic brittleness test

NAVY QPL-24519-31 NOTICE 1-2008 Molding Plastics, Electrical, Thermoplastic
NAVY QPL-24519-2010 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-2013 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-31-2005 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-QPD-2010 Molding Plastics, Electrical, Thermoplastic

国家市场监督管理总局、中国国家标准化管理委员会, Thermoplastic brittleness test

GB/T 39379-2020 Thermoplastics piping systems for non-pressure applications—Test method for watertightness
GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
GB/T 37842-2019 Ball valves of thermoplastics materials
GB/T 38008-2019 Gate valves of thermoplastics materials
GB/T 39395-2020 Test method for buckling resistance of the thermoplastics inspection chamber bases
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy

Lithuanian Standards Office , Thermoplastic brittleness test

LST EN 12061-2002 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
LST EN 917-2001 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)
LST EN 1053-2002 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
LST EN 1705-2002 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
LST EN 14932-2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
LST EN 1704-2002 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
LST EN 12814-1-2001 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
LST EN 12814-4-2002 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
LST EN 12814-2-2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
LST EN 12814-1-2001/AC-2004 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
LST EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
LST EN 12814-6-2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
LST EN 13067-2013 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
LST EN 1871-2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
LST EN 12943-2001 Filler materials for thermoplastics - Scope, designation, requirements, tests
LST EN 12814-3-2000 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
LST EN 12814-3-2000/A1-2006 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
LST EN 12814-8-2002 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
LST EN 12814-8-2002/AC-2004 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
LST EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
LST EN 14830-2007 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

AENOR, Thermoplastic brittleness test

UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNE-EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
UNE 135221:2010 Road signalisation equipment. Horizontal signalisation. Thermoplastics. Test method for heat stability
UNE-EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
UNE-ISO 812:2012 Rubber, vulcanized or thermoplastic --Determination of low-temperature brittleness
UNE-EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
UNE-EN 12814-4:2002 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test.
UNE-EN 12814-2:2001 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test.
UNE-EN 917:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
UNE-EN 13067:2014 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
UNE-EN 12814-6:2001 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test.
UNE-EN 14830:2007 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

German Institute for Standardization, Thermoplastic brittleness test

DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN EN 28233:1991 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
DIN EN 917:1997-03 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN 16887:1990 Determination of the long-term hydrostatic pressure resistance of thermoplastics pipes
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN EN 28659:1991 Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990
DIN 53499:1974 Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials
DIN ISO 812:2021-06 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2017)
DIN EN ISO 8233:2023-02 Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023); German and English version prEN ISO 8233:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN 28233 (1991-06).
DIN EN 12814-2:2021-08 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2021
DIN 16986:1987 Thermoplastics flat bars; dimensions
DIN 53498:1967 Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN 12814-1:1999 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999
DIN EN 12814-4:2018-08 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2018+AC:2018
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
DIN EN ISO 3994:2015-11 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014); German version EN ISO 3994:2014
DIN EN ISO 13263:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
DIN EN 15860:2012 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods; German version EN 15860:2010
DIN EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN ISO 8659:2020-07 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020
DIN EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods; English version of DIN EN 14932:2007-03
DIN EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance; German version EN 12061:1999
DIN EN 14830:2007-01 Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance; German version EN 14830:2006 / Note: To be replaced by DIN EN ISO 13267 (2022-09).
DIN EN ISO 6259-1:2015-08 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015); German and English version EN ISO 6259-1:2015
DIN EN 12814-3:2014-07 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test; German version EN 12814-3:2014
DIN EN 12814-6:2000-03 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
DIN 53465:1963 Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials
DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN 53497:2017 Testing of plastics - Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
DIN 53497:1969 Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing
DIN EN 12814-7:2022-11 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German and English version prEN 12814-7:2022 / Note: Date of issue 2022-10-14*Intended as replacement for DIN EN 12814-7 (2003-01).
DIN EN ISO 13968:2009 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); English version of DIN EN ISO 13968:2009-01
DIN ISO 812:2021 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2017)
DIN ISO 812:2020 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2017); Text in German and English
DIN EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN 917:1997 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996 + Amd.1:2004); English version of DIN EN ISO 294-2:2006-05

European Committee for Standardization (CEN), Thermoplastic brittleness test

EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
EN ISO 13263:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
prEN 495-5-1991 Thermoplastic and elastomeric roofing and sealing sheets; low temperature folding test
EN 12293:1999 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
EN 917:1997 Plastics Piping Systems - Thermoplastics Valves - Test Methods for Resistance to Internal Pressure and Leaktightness
EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
EN 12814-2:2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials ISO 295:2004
EN 14932:2006 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
EN 763:1994 Plastics Piping and Ducting Systems - Injection-Moulded Thermoplastics Fittings - Test Method for Visually Assessing Effects of Heating
EN 13067:2003 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
prEN ISO 2505:2021 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO/DIS 2505:2021)
prEN ISO 2505 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO/DIS 2505:2021)

RU-GOST R, Thermoplastic brittleness test

GOST 16782-2015 Plastics. Determination of the brittleness temperature by impact
GOST 28746-1990 Moulding compounds and casting thermosetting resins. Accelerated test method for heating resistance
GOST 16782-1992 Plastics. Determination of the brittleness temperature by impact
GOST 27078-2014 Thermoplastics pipes. Longitudinal reversion. Test method and parameters
GOST 27712-1988 Laminated plastic sheets. Methods for accelerated determination of thermal endurance

CZ-CSN, Thermoplastic brittleness test

CSN 64 0620-1983 Plastics. Determination of the brittleness temperature by impact
CSN 64 0210-1987 Injection moulding of test specimens of hermoplastics
CSN 64 0321-1963 Testing of polystyrene hermoplastics
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
CSN 64 0528-1993 Plastics. Determination of coefficient of linear thermal expansion of plastics

KR-KS, Thermoplastic brittleness test

KS M ISO 974-2022 Plastics — Determination of the brittleness temperature by impact
KS M ISO 812-2019 Rubber, vulcanized or thermoplastic —Determination of low-temperature brittleness
KS M ISO 6259-1-2016 Thermoplastics pipes－Determination of tensile properties－Part 1：General test method
KS M ISO 4065-2022 Thermoplastics pipes — Universal wall thickness table
KS M ISO 13968-2020 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility

YU-JUS, Thermoplastic brittleness test

JUS G.S2.550-1997 Plastics - Determination of brittleness temperature of plastics and elastomers - Impact break method
JUS G.S3.508-1991 Plastics.Termoplastic pipes.Determination of tensile properties

International Federation of Trucks and Engines, Thermoplastic brittleness test

NAVISTAR MPAPS L-6040-2016 Thermoplastic Elastomer Molding Compounds
NAVISTAR TMS 6040-2016 VOID - Thermoplastic Elastomer Molding Compounds

SE-SIS, Thermoplastic brittleness test

SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials
SIS SS-EN 28 233-1991 Thermoplastic valves — Torque — Test method
SIS SS 16 67 12-1979 Thermoset polyester sheet moulding compounds

Aerospace Industries Association/ANSI Aerospace Standards, Thermoplastic brittleness test

AIA/NAS NAS 281-1947 Tubing - Thermoplastic (Rev. 1)

Guangdong Provincial Standard of the People's Republic of China, Thermoplastic brittleness test

DB44/T 927-2011 Thermoplastic Tableware

CEN - European Committee for Standardization, Thermoplastic brittleness test

EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
PREN 13341-2018 Static thermoplastic tanks for above ground storage of fuel - Product characteristics and test methods
EN ISO 19893:2018 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
PREN 12814-2-2019 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
PREN 1871-2018 Road marking materials - Paint@ thermoplastic and cold plastic materials - Physical properties
EN ISO 7808:1998 Plastics - Thermosetting moulding materials- Determination of transfer flow
EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PREN 12814-8-2019 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements

(U.S.) Ford Automotive Standards, Thermoplastic brittleness test

FORD ESA-M4D433-A2-1985 THERMOPLASTIC POLYOLEFIN ELASTOMER, BLOW MOLDING COMPOUND
FORD WD 954-2012 Material and Performance Requirements for Screws Used in Thermoplastics Materials
FORD WD954-2015 Material and Performance Requirements for Screws Used in Thermoplastics Materials

TR-TSE, Thermoplastic brittleness test

TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
TS 986-1971 PLASTICS DETERMINATION OF INCANDESCENCE RESISTANCE OF RIGID SELFEXTINGUISHING THERMOSETTING PLASTICS
TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
TS 859-1970 THERMOPLASTIC INSULATION TAPE
TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —

PL-PKN, Thermoplastic brittleness test

PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN-EN 12814-2-2021-06 E Testing of welded joints of thermoplastics semi-finished products--Part 2: Tensile test
PN C89418-1990 Plastics Determination of volatile matter in thermoplastics
PN-EN 12814-8-2021-07 E Testing of welded joints of thermoplastics semi-finished products--Part 8: Requirements
PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
PN-EN 1871-2021-03 E Road marking materials -- Paint, thermoplastic and cold plastic materials -- Physical properties

GM North America, Thermoplastic brittleness test

GM GM9059P-1988 Test for Thermal-Oxidative Stability Characteristics of Plastics
GM GM9082P-1988 Test for Wear Resistance of Plastics
GM 9984831-1989 Primer - Rigid, Conductive, for Thermoplastics
GM 9984830-1989 Primer - Rigid, Nonconductive, for Thermoplastics

Group Standards of the People's Republic of China, Thermoplastic brittleness test

T/CPCIF 0194-2022 The anti-blooming test of powder flame retardants in thermoplastics
T/CSAE 193-2021 Tightening torque performance test methods of automobile self-tapping thread joint sinthermoplastics materials

Professional Standard - Commodity Inspection, Thermoplastic brittleness test

SN/T 0906-2000 Method for injection moulding test spcimens of thermoplastic materials for import and export

National Sanitation Foundation (NSF), Thermoplastic brittleness test

NSF 21-2015 Thermoplastic refuse containers

AWS - American Welding Society, Thermoplastic brittleness test

G1.2M/G1.2-1999 Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics

Professional Standard - Aviation, Thermoplastic brittleness test

HB/Z 349-2001 Heat-resistant thermoplastic injection molding process
HB 7597-1998 General Specification for Thermoplastic Molded Parts
HB/Z 5017-1976 Molding process of thermosetting plastic products
HB/Z 317-1998 Injection molding process of thermosetting plastic products
HB/Z 5017-1996 Molding process of thermosetting plastic products

RO-ASRO, Thermoplastic brittleness test

STAS 6127-1968
STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications

FI-SFS, Thermoplastic brittleness test

SFS 4238 E-1979 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.

ES-UNE, Thermoplastic brittleness test

ISO 2505:2023 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-EN ISO 8659:2021 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
UNE-EN 1871:2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties

American National Standards Institute （ANSI), Thermoplastic brittleness test

ANSI/NSF 21-1996 Thermoplastic Refuse Containers
ANSI/ASTM D2837:2013 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

AASHTO - American Association of State Highway and Transportation Officials, Thermoplastic brittleness test

DIVISION II SEC 30-1996 Thermoplastic Pipe (Interim 1998)
T 250-2003 Standard Method of Test for Thermoplastic Traffic Line Material
T 250-2004 Standard Method of Test for Thermoplastic Traffic Line Material
T 250-2005 Standard Method of Test for Thermoplastic Traffic Line Material

CH-SNV, Thermoplastic brittleness test

SN 234 352-1978 Shell end mills with tenon drive
SN EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
SN EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermoplastic brittleness test

GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material

International Truck and Engine Corporation (ITEC), Thermoplastic brittleness test

INTERN 6040-2008 Thermoplastic Elastomer Molding Compounds Revision E

Professional Standard - Electron, Thermoplastic brittleness test

SJ 20779-2000 Test methods for insulation plastics sheet laminated thermosetting

NO-SN, Thermoplastic brittleness test

NS 2971-2006 Cover plates of themoplastics for cables

IN-BIS, Thermoplastic brittleness test

IS 13960-1994 Thermoplastic strappings - specification

Professional Standard - Chemical Industry, Thermoplastic brittleness test

HG/T 3865-2006 Test method for rectangular flow cure properties of thermosetting moulding compounds

VDI - Verein Deutscher Ingenieure, Thermoplastic brittleness test

VDI 2006-1970 Gestalten von Spritzgussteilen aus thermoplastischen Kunststoffen

ZA-SANS, Thermoplastic brittleness test

SANS 6269:2005 Welding of thermoplastics - Test methods for welded joints

DE-GPVA, Thermoplastic brittleness test

AD 2000-Merkblatt HP120 R-2001 Manufacture and testing of pressure vessels.Construction regulations.Thermoplastic piping

AIA/NAS - Aerospace Industries Association of America Inc., Thermoplastic brittleness test

NAS281-1947 Tubing - Thermoplastic (Rev 1)

Professional Standard - Machinery, Thermoplastic brittleness test

JB/T 3958.2-1999 Test methods for thermosetting mouding plastics used for electrical insulation

The American Road & Transportation Builders Association, Thermoplastic brittleness test

AASHTO T 250-2005(R2009) Standard Method of Test for Thermoplastic Traffic Line Material

工业和信息化部, Thermoplastic brittleness test

HG/T 2006-2022 Thermoset and Thermoplastic Powder Coatings

Hebei Provincial Standard of the People's Republic of China, Thermoplastic brittleness test

DB13/T 1512-2012 thermoplastic elastomer cable compound