ZH
RU
ES

Ford's pp material

Ford's pp material, Total:401 items.

In the international standard classification, Ford's pp material involves: Wastes, Plastics, Rubber and plastics products, Pipeline components and pipelines, Services, Reinforced plastics, Fluid storage devices, Animal feeding stuffs, Vocabularies, Welding, brazing and soldering, Cellular materials, Protection against fire, Insulating materials, Magnetic materials, Products of the chemical industry, Electricity. Magnetism. Electrical and magnetic measurements, Iron and steel products.


(U.S.) Ford Automotive Standards, Ford's pp material

  • FORD WSS-M4D911-B-2011 POLYPROPYLENE (PP) COPOLYMER, HIGH IMPACT 100% RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D638-B-2011 POLYPROPYLENE (PP) MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSD-M4D651-A-2011 POLYPROPYLENE (PP), 10% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D741-B1-2011 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D865-A-2010 POLYPROPYLENE (PP), 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D841-A2-2011 POLYPROPYLENE (PP) COPOLYMER, 16% MINERAL FILLED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D841-A6-2011 POLYPROPYLENE (PP) COPOLYMER, 13 % TALC REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D729-B7-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, BLOW MOLDING COMPOUND, UNDERBODY AND ENGINE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D731-B1-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D788-A2-2011 POLYPROPYLENE (PP), COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M4D788-A1)
  • FORD WRS-M4D729-B2-2011 POLYPROPYLENE (PP), 20% MINERAL FILLED, MOLDING COMPOUND, 50% RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D729-B1
  • FORD WSS-M4D865-A4-2012 POLYPROPYLENE (PP) HOMOPOLYMER, 30% LONG GLASS FIBER AND MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D556-A8-2011 POLYPROPYLENE (PP) COPOLYMER, 22% MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D936-A1-2012 POLYPROPYLENE (PP) COPOLYMER, 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D865-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-A3-2012 POLYPROPYLENE (PP) HOMOPOLYMER, 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND, HIGH PERFORMANCE, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D969-A-2011 POLYPROPYLENE (PP) HOMOPOLYMER RESISTANT TO COOLING AGENTS *** TO BE USED WITH FORD WSS-M99P1111-A ***
  • FORD WSF-M3G207-A-2011 LABEL, ACRYLIC FILM, TWO LAYER, LASER ENGRAVABLE, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSA-M2D451-A2-2008 HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESE-M7G3-A-2011 LABEL, POLYESTER, THERMAL TRANSFER PRINTABLE, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D732-B7-2014 POLYPROPYLENE (PP) COPOLYMER, 30% GLASS FIBER FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D732-B2)
  • FORD WSS-M4D732-B7-2021 POLYPROPYLENE (PP) COPOLYMER, 30% GLASS FIBER FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D732-B2)
  • FORD WSS-M98P14-A3-2011 PERFORMANCE OF PLASTIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WSS-M4D994-A2-2013 POLYPROPLYENE (PP) 15% GLASS FILLED BLOW MOLDABLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D994-A2-2015 POLYPROPLYENE (PP) 15% GLASS FILLED BLOW MOLDABLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D644-A4-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M99D63-A2-2006 POLYPROPYLENE (PP) FLOOR MAT, GRAINED, SHAPED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D627-A-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D627-A2-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A9-2011 PERFORMANCE OF UREA SCR MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WSS-M98P14-A3-2014 PERFORMANCE OF PLASTIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M4D854-B1-2013 POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER REINFORCED, MOLDING COMPOUND *** TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D841-A4-2011 POLYPROPYLENE (PP) COPOLYMER, 11 - 17% MINERAL FILLED, HIGH MELT FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A7-2011 PERFORMANCE OF PLASTIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WSB-M4D926-A-2010 POLYCARBONATE (PC), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD SK-M99J9587-B-2012 STONE PECK RESISTANT MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD SK-M99J9587-A)
  • FORD WSS-M98P14-A4-2011 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WRS-M4D1064-A1-2021 POLYPROPYLENE (PP) HOMOPOLYMER, 10% GLASS BEAD / GLASS FIBER, REINFORCED MOLDING COMPOUND, 50% RECYCLED MATERIAL BY WEIGHT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D941-A1-2012 POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND, LUBRICATED AND HEAT STABILIZED WITH 25% MINIMUM RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D796-A1-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D796-A2-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A5-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WSS-M98P14-A5-2014 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
  • FORD WSB-M4D841-A-2013 POLYPROPYLENE (PP) COPOLYMER, 15% MINERAL FILLED, COLOR PIGMENTED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D732-A4-2013 POLYPROPYLENE (PP) HOMOPOLYMER, GLASS FIBER/MICA REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A7-2014 PERFORMANCE OF PLASTIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M98P14-A4-2014 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M98P14-A8-2011 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD SK-M99J9589-C-2012 STONE PECK RESISTANT REPAIR MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD SK-M99J9589-A)
  • FORD WSS-M4D825-B1-2013 POLYPROPYLENE (PP) COPOLYMER, 5% MINERAL FILLED, COLOR PIGMENTED, MOLDING COMPOUND, INTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D732-B2-2014 POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER FILLED MOLDING COMPOUND, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D732-B2-2021 POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER FILLED MOLDING COMPOUND, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A2-2014 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
  • FORD WSK-M4D819-A-2008 POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D761-A-2010 POLYCARBONATE (PC) MEDIUM MELT FLOW RATE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D761-A2-2010 POLYCARBONATE (PC), HIGH MELT FLOW RATE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A6-2011 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WSK-M4D820-A-2008 POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL, 48 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D638-C-2012 POLYPROPYLENE (PP) MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR, HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99P23-C2-2013 MATERIAL CONTROL, GRAY BOX COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99P23-C1)
  • FORD WSS-M98P14-A2-2011 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WSS-M98P14-A3-2021 PERFORMANCE OF PLASTIC MATERIALS USED IN FLEX FUELS (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M98P14-A6-2014 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
  • FORD WSK-M4D851-A-2011 POLYPROPYLENE (PP) FOAM, CLOSED CELL 55 kg/m? DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D796-A3-2010 POLYCARBONATE (PC), MODIFIED, HIGH FLOW AND HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC), IMPACT MODIFIED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M2P168-A-2010 PAINT PERFORMANCE, ZINC-RICH PRIMER, COOLING AND ALLIED TUBES ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSF-M4D757-A-2010 POLYCARBONATE (PC), 12.5% TiO2 FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D797-A-2010 POLYCARBONATE (PC), 22% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D255-A-2011 ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D955-A-2012 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A1-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A8-2014 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN BIO-DIESEL FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)
  • FORD WSK-M4D792-A2-2011 ABS, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M4D1022-A2-2014 POLYPROPYLENE (PP), COPOLYMER, 10% RICE HULL FILLED, MOLDING COMPOUND, RECYCLED GRADE 90% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WRS-M4D1022-A1)
  • FORD WSF-M4D628-A-2011 POLYAMIDE (PA) 66 MOLDING COMPOUND, 25 % GLASS FIBER REINFORCED, FLAME RETARDED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A7-2021 PERFORMANCE OF PLASTIC MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M98P14-A4-2021 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN FLEX FUELS (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M4D994-A-2021 POLYPROPYLENE (PP) COPOLYMER, 15% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M4D1064-A2-2021 POLYPROPYLENE (PP) HOMOPOLYMER AND COPOLYMER, IMPACT MODIFIED, UV STABILIZED, 10% GLASS BEAD / GLASS FIBER, REINFORCED MOLDING COMPOUND, EXTERIOR, 50% RECYCLED MATERIAL BY WEIGHT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WRS-M4D1064-A1)
  • FORD WSS-M98P14-A5-2021 PERFORMANCE OF PLASTIC FUELTUBE MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M98P14-A1-2014 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D922-A-2010 POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D841-A5-2011 POLYPROPYLENE (PP) COPOLYMER, 11 - 17% MINERAL FILLED, HIGH MELT FLOW MOLDING COMPOUND, 25% MINIMUM PCR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D959-A-2011 POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M15P38-A-2008 HEADLINER, INTEGRAL AIR DUCT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M15J4-A-2012 PAINT, TWO PACK, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M15P16-A-2013 CUSHION MATERIALS, INFLATABLE RESTRAINT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A2-2021 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIAL USED IN FLEX FUELS (Shown on FORD WSS-M98P14-A1)
  • FORD WSS-M98P14-A10-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN CNG FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
  • FORD WSS-M99D514-A2-2014 THERMOPLASTIC COMPOUNDS USING DIRECT LONG GLASS FIBER TECHNOLOGY (DLFT) / INJECTION MOLDING COMPOUNDING (IMC) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99D514-A1)
  • FORD WSD-M1A283-B37-2013 STEEL, CROSS REFERENCE FOR STANDARD PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A283-B1)
  • FORD WSD-M1A283-B51-2013 STEEL, CROSS REFERENCE FOR STANDARD PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A283-B1)
  • FORD WSD-M1A283-B50-2013 STEEL, CROSS REFERENCE FOR STANDARD PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M1A283-B1)
  • FORD WSS-M98P14-A6-2021 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
  • FORD ESB-M4D330-A1-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, CLEAR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESE-M99J289-A-2012 LABEL, VINYL, PRESSURE SENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M99P42-A2-2010 TEXTILE MATERIALS, IDENTIFICATION OF RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D673-A-2011 POLYAMIDE (PA) 66, HEAT STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D647-A-2011 POLYAMIDE (PA) 66 MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99P23-C1-2013 MATERIAL CONTROL, BLACK BOX COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D745-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT STRENGTH, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P14-A8-2021 PERFORMANCE OF ELASTOMERIC MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
  • FORD WSB-M4D690-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M99P42-A1-2011 MOLDING COMPOUND, IDENTIFICATION OF RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M99P42-A2-2011 TEXTILE MATERIALS, IDENTIFICATION OF RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D964-A3-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P188-B1-2015 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P188-A1-2014 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P188-B1-2021 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D827-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESH-M6J149-A-2008 PRIMER, ACRYLIC, SOLVENT BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M99G147-A-2012 CARBON BRUSH MATERIAL (2153-2660 micro ohm.cm SPECIFIC RESISTANCE) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P187-A2-2010 PAINT PERFORMANCE, WATER BASED, AUTODEPOSITED, NON VISIBLE EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D744-A4-2011 ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.5 - 3.5, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M4D744-A2
  • FORD ESB-M99J291-A3-2012 TAPE, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, NON-VISIBLE APPLICATIONS - 0.36 MM (14 MIL) NOMINAL THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD ESB-M99J291-A
  • FORD ESB-M4D330-A2-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, PIGMENTED ZINC TYPE - EXTERIOR GRADE - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D330-A1)
  • FORD ESB-M99J310-A-2012 MOLDED COATING FOR COMPRESSION MOLDED FRP - HARDENER PORTION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M99J309-A)
  • FORD WSS-M1H1178-A1-2014 FABRIC, MATERIAL PEARL PATTERN, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2G146-B-2014 ADHESIVE, THERMOSETTING - FOR FRICTION MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2G146-A-2014 ADHESIVE, THERMOSETTING - FOR FRICTION MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D330-A4-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, BLACK SODIUM TYPE - EXTERIOR GRADE - NOT PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D330-A1)
  • FORD ESB-M4D330-A6-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, GLASS FILLED - BLACK - ZINC/SODIUM TYPE - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M4D330-A1)
  • FORD WSK-M4D564-A-2010 POLYAMIDE (PA) 66, MOLDING COMPOUND - SELF EXTINGUISHING (SE) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D878-A-2011 POLYARYLETHERKETONE (PAEK), SELF-EXTINGUISHING (SE) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M16J11-A-2012 PAINT, CLEARCOAT, TWO PACK, PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESK-M6J147-A-2012 PRIMER, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M6J147-B-2014 PRIMER, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M98P15-A1-2014 ACRYLIC COATING PERFORMANCE, RIGID SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99D514-A2-2011 THERMOPLASTIC COMPOUNDS USING DIRECT LONG GLASS FIBER TECHNOLOGY (DLFT) / INJECTION MOLDING COMPOUNDING (IMC) ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M99D514-A1
  • FORD WSS-M8P3-E3-2011 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M8P3-E1
  • FORD WSS-M2F208-A3-2012 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED SPACER FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2F208-A1
  • FORD WSS-M2F208-A2-2014 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), OPEN CELL POLYURETHANE FOAM BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2F208-A1)
  • FORD WSK-M4D702-A-2012 ACETAL (POM) COPOLYMER, MINERAL OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D731-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 20% GLASS FIBER REINFORCED, MELT FLOW RATE 10 - 18 ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P187-A1-2010 PAINT PERFORMANCE, WATER BASED, AUTODEPOSITED, NON VISIBLE INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M99J265-A-2012 PAINT, COLOR COAT POLYPROPYLENE - INTERIOR, BAKING ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D626-A1-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESK-M16J3-A-2012 PAINT, TWO PACK, PLASTIC SUBSTRATES, HIGH FLEXIBLE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M16J3-B-2012 PAINT, TWO PACK, HIGH FLEXIBLE, PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P188-A1-2011 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M8P3-E3-2012 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M8P3-E1
  • FORD WSS-M8P3-E3-2013 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M8P3-E1
  • FORD WSS-M8P3-E3-2014 PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUALITY, SUPPORTED PLUS FOAM LAMINATE AND/OR BACKING MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M8P3-E1)
  • FORD WSS-M4D873-A3-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED, LOW THERMAL EXPANSION, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D906-B2-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND, MEDIUM HEAT RESISTANT, EXTERIOR, PAINTED APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1A345-A2-2013 STEEL, SHEET, COLD ROLLED, LOW CARBON, IMPROVED FORMABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1A345-A1; No direct replacement, use CBP strategy)
  • FORD ESF-M4D405-D-2010 POLYETHYLENE TEREPHTHALATE (PET), 35 % GLASS FIBER/MICA REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESF-M4D405-B)
  • FORD ESF-M4D405-D2-2010 POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A61-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A62-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A63-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A64-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A65-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A66-2009 PLATING PERFORMANCE, 60 CYCLES APG/APG''''E'''' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M16J13-A-2012 PAINT, TEXTURED, TWO PACK, FLEXIBLE, PLASTIC SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P158-A1-2015 PRINTED GRAPHICS PERFORMANCE, PLASTIC AND PAINTED SUBSTRATES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D638-D2-2013 POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND, MOLD-IN-COLOR, LOW GLOSS, UV STABILIZED, HIGH IMPACT AT COLD TEMPERATURE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A11-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A12-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A13-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A14-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P189-A15-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P189-A1)
  • FORD WSS-M2P189-A16-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P189-A1)
  • FORD ESB-M2P106-A-2010 PAINT QUALITY, EPOXY COATING - RUSTLESS STEEL SCREWS - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D744-A-2011 ACETAL (POM) HOMOPOLYMER, UV STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D955-B-2011 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, NON VISIBLE EXTERIOR / UNDERBODY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D799-A-2012 POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-B3-2012 POLYPROPYLENE (PP) 40% LONG GLASS FIBER (9-13 mm) REINFORCED, STRUCTURAL, NON UV-STABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D405-C2-2010 POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS REINFORCED MOLDING COMPOUND, SELF-EXTINGUISHING (SE) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M5H50-A20-2021 LAMINATE, POLYESTER FABRIC, MOOREA PATTERN PILE WARP KNIT, RECYCLED, PIR/PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M5H50-A10)
  • FORD WSS-M2F208-A1-2012 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2F208-A1-2014 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99P2222-B1-2011 PERFORMANCE, VEHICLE INTERIOR ENVIRONMENT QUALITY MATERIAL / COMPONENT REQUIREMENTS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99P37-A-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99P37-B-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D626-A2-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D860-A-2011 ACETAL (POM) COPOLYMER, 25% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M16J20-A2-2014 PAINT, TWO COMPONENT ELASTOMERIC BASECOAT/CLEARCOAT OVER FLEXIBLE SUSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M16J20-A1)
  • FORD WSS-M16J20-A2-2021 PAINT, TWO COMPONENT ELASTOMERIC BASECOAT/CLEARCOAT OVER FLEXIBLE SUSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M16J20-A1)
  • FORD WRS-M4D941-B1-2012 POLYPROPYLENE (PP) MOLDING COMPOUND, HOMOPOLYMER, HEAT STABILIZED, 30% GLASS FIBER/MICA REINFORCED, RECYCLED GRADE 25% PIR/PCR, NON-VISIBLE APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D623-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1005-A2-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D1005-A1
  • FORD WSS-M2P142-B-2012 PAINT PERFORMANCE, STEEL WHEEL WEIGHTS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M2P137-A1-2010 PAINT PERFORMANCE, ENGINES, AND ENGINE ACCESSORIES, 24 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M2P137-A2-2010 PAINT PERFORMANCE, ENGINES, AND ENGINE ACCESSORIES, 48 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M2P137-A3-2010 PAINT PERFORMANCE, ENGINES, AND ENGINE ACCESSORIES, 96 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P185-A6-2010 PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, HIGH PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
  • FORD WSS-M2P185-A7-2010 PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, STANDARD PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
  • FORD WSS-M2P185-A8-2010 PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, MIN PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
  • FORD WSK-M4D695-A-2010 POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, LOW MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D644-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D931-A1-2011 POLYETHYLENE, HIGH DENSITY (PE-HD), 25% MICA FILLED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P177-C2-2010 PAINT PERFORMANCE, METAL SUBSTRATES, MODERATE VISIBILITY, 6 WEEK RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M5P8-B1-2011 LIGHTING METALIZATION, PLASTIC SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-B1-2012 POLYPROPYLENE (PP) 40% LONG GLASS FIBER (9-13 mm) REINFORCED, GENERAL PURPOSE, STRUCTURAL, NON UV-STABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-B7-2012 POLYPROPYLENE (PP) 20% LONG GLASS FIBER (9-13 mm) REINFORCED, STRUCTURAL, NON UV-STABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D891-A1-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D733-A3-2010 ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D733-A4-2010 ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D882-A1-2011 ACETAL (POM) COPOLYMER, 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M5H50-A10-2021 LAMINATE, POLYESTER FABRIC, MOOREA PATTERN, PILE WARP KNIT, 100% VIRGIN ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-B4-2012 POLYPROPYLENE (PP) 30% LONG GLASS FIBER (9-13 mm) REINFORCED, STRUCTURAL, NON UV-STABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D833-A2-2011 ACRYLONITRILE STYRENE ACRYLATE (ASA) MOLDING COMPOUND, EXTERIOR HIGH GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D623-A-2011 POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D578-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED, 35% GLASS REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M15J14-A2-2020 PAINT, TWO COMPONENT COLOR COAT FOR PLASTIC, INTERIOR, HARD COAT, METALLIC ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M15J14-A1)
  • FORD WSB-M4D918-A-2010 POLYPHENYLENE SULFIDE (PPS), 33% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D892-A1-2010 POLYAMIDE 12 (PA12), HEAT STABILIZED 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D993-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D962-A-2011 THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND, 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1016-A1-2011 POLYAMIDE (PA) 6,6 HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D674-A2-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, 60% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1011-A1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED, 10% GLASS REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1019-A1-2012 POLYAMIDE (PA) 66, HEAT STABILIZED, 15%GLASS FIBER REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D744-A3-2011 ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 19 - 31, INTERIOR (Shown on FORD WSK-M4D744-A2)
  • FORD WSK-M70J8-A-2011 PAINT, POWDER, THERMOSETTING POLYESTER, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D841-A2-2003 POLYPROPYLENE (PP) COPOLYMER, 16 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D651-A2-2009 POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P170-B7-2011 PAINT PERFORMANCE, METAL SUBSTRATES, HEAT RESISTANT WSS-M2P170-B7 COATING, HIGH VISIBILITY, 450癈, max ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2P170-B1
  • FORD WSB-M4D766-A-2010 POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M15P42-A-2013 PERFORMANCE, CHILD SEAT LINER, FABRIC - FOAM LAMINATED COMPOSITE WITH HOT STAM, LABEL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D823-B1-2011 POLYAMIDE (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M5H23-A-2013 LAMINATE, POLYESTER FABRIC, POLYURETHANE FOAM PRISMATIC PATTERN, KNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M5H42-A1-2014 LAMINATE, POLYESTER FABRIC, POLYURETHANE FOAM, CHINA PRISM HD PATTERN, KNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M5H40-B5-2021 LAMINATE, POLYESTER FABRIC, POLYESTER BACKING LYRIC HD (HEAVY DUTY) PATTERN, KNIT, 100% VIRGIN ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D550-A10-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, MOLDED IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D744-A2-2011 ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 11 - 17, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M4D664-B2-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR, XX% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D664-B1)
  • FORD ESF-M4D405-B-2011 POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D405-C1-2011 POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D664-B1-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2F217-A1-2021 FABRIC, VINYL COATED (PVC), SUPPORTED, ANTI-SQUEAK, GAP HIDER MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D694-A-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 63 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D638-E2-2021 POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND, MOLD-IN-COLOR, LOW GLOSS, UV STABILIZED, HIGH FLOW, HIGH IMPACT (80% DUCTILITY) AT COLD TEMPERATURE (-20 °C), INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99J385-A-2020 PAINT, ONE COMPONENT COLOR COAT FOR PLASTIC, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD U-ZEX3-1995 PROPERTY IDENTIFICATION FOR MATERIAL HANDLING EQUIPMENT
  • FORD ESB-M4D330-A5-2011 IONOMER (ETHYLENE) MOLDING COMPOUND, FOAMED GLASS FILLED - BLACK - ZINC/SODIUM TYPE EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D891-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA), HIGH FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M3G56-A-2012 TAPE, UNTREATED CLOTH - PRESSURE SENSITIVE - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D779-A2-2010 POLYETHYLENE THEREPHTHALATE (PET) 35% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSF-M4D620-A-2011 POLYETHYLENE TEREPHTHALATE (PET) 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M4D993-B2-2011 POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND, 25% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D993-B1)
  • FORD WRS-M4D823-B2-2011 POLYAMIDE (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, 25% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D823-B1
  • FORD SK-M1P9103-A-2006 DECORATIVE ELECTROPLATING ON STEEL, BLACK OR LOW GLOSS BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M99D43-A-2006 POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A***

German Institute for Standardization, Ford's pp material

  • DIN EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; English version of DIN EN 15345:2008-02
  • DIN EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007); English version of DIN EN ISO 1873-2:2007-11
  • DIN EN ISO 19069-2:2020-01 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016 / Note: To be replaced by DIN EN ISO 19069-2 (2023-02).
  • DIN 5036-1:1978-07 Radiometric and photometric properties of materials; definitions characteristics
  • DIN EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials; German version EN 16245-5:2013
  • DIN CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2013
  • DIN 5036-4:1977-08 Radiometric and photometric properties of materials; classification

GM Europe, Ford's pp material

European Committee for Standardization (CEN), Ford's pp material

  • PD CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U, PP and PE materials
  • EN 15345:2007 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
  • EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
  • EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
  • EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
  • EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
  • prEN ISO 19069-2 Plastics - Polypropylene (PP) moulding and extrusion materials - Part2: Preparation of test specimens and determination of properties (ISO/DIS 19069-2:2023)

Danish Standards Foundation, Ford's pp material

  • DS/CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials
  • DS/EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
  • DS/EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
  • DS/EN ISO 1873-1:1996 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
  • DS/EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
  • DS/EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics

Association Francaise de Normalisation, Ford's pp material

  • XP P16-373*XP CEN/TS 14541:2014 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials
  • NF T50-804*NF EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
  • NF EN IEC 60674-3-1:2021 Films plastiques à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 1 : films de polypropylène biorienté (PP) pour condensateurs
  • NF T57-120-5*NF EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: specific requirements for core materials
  • NF T50-002-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
  • NF T50-002-2*NF EN ISO 19069-2:2017 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
  • NF EN 60404-8-1:2015 Matériaux magnétiques - Partie 8-1 : spécifications pour matériaux particuliers - Matériaux magnétiquement durs
  • NF EN 16245-5:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 5 : exigences particulières pour les matériaux d'âme
  • NF T57-120-4*NF EN 16245-4:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 4 : specific requirements for fabrics
  • NF T57-120-3*NF EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3 : specific requirements for fibre
  • XP T58-300-2*XP CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2 : characterisation of WPC materials
  • NF EN 16245-3:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 3 : exigences particulières pour les fibres
  • NF EN 16245-4:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 4 : exigences particulières pour les tissus
  • NF T56-111:1986 Plastics. Flexible cellular materials. Determination of identation characteristics.
  • NF EN 60556:2006 Matériaux gyromagnétiques destinés aux applications hyperfréquences - Méthodes de mesure des caractéristiques
  • NF T70-367:2009 Energetic materials for defence - Characterisation of the bond between energetic materials and interior fitting materials - Peeling
  • NF T70-367:2013 Energetic materials for defence - Characterisation of the bond between energetic materials and interior fitting materials - Peeling
  • NF T70-367:2015 Energetic materials for defence - Characterisation of the bond between energetic materials and interior fitting materials - Peeling
  • NF T36-005/A1:2016 Paints and Varnishes - Caracterization of coating materials

British Standards Institution (BSI), Ford's pp material

  • BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • BS EN 15345:2007 Plastics - Recycled plastics - Characterization of polypropylene (PP) recyclates
  • BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for core materials
  • BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fabrics
  • DD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications — Utilisation of non-virgin PVC-U, PP and PE materials
  • BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
  • BS EN ISO 19069-2:2016 Tracked Changes. Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
  • BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements
  • BS EN 10265:1996 Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
  • BS EN 10265:1996(1999) Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
  • BS EN 60216-2:2005 Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
  • PD ISO/TR 10809-1:2009 Cast irons. Materials and properties for design
  • PD ISO/TR 10809-1:2023 Cast irons. Materials and properties for design

Professional Standard - Agriculture, Ford's pp material

Japanese Industrial Standards Committee (JISC), Ford's pp material

  • JIS K 6921-2:2005 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6921-2:2010 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6921-2:1996 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6922-2:1996 Plastics -- Polyethylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
  • JIS G 4108:2007 Alloy steel bars for special application bolting materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ford's pp material

  • GB/T 35265-2017 Characterisation and testing methods of recycled polypropylene (PP)

Society of Automotive Engineers (SAE), Ford's pp material

RU-GOST R, Ford's pp material

  • GOST R 53060-2008 Social service of the population. Documentation of social service establishments

SG-SPRING SG, Ford's pp material

  • SS 5 Pt.B11-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B11: Determination Of Viscosity By Ford Viscosity Cup

Association of German Mechanical Engineers, Ford's pp material

ESD - ESD ASSOCIATION, Ford's pp material

  • ESD DS7.1:1992 REVISED - Floor Materials - Resistive Characterization of Materials
  • S7.1-2005 Resistive Characterization of Materials
  • STM7.1-2013 The Protection of Electrostatic Discharge Susceptible Items Floor Materials Characterization of Materials

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Ford's pp material

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Ford's pp material

YU-JUS, Ford's pp material

  • JUS G.C1.310-1991 Plastics.Polypropylene (PP) and propylene - copolymer thermoplastic .Classification,designation and determination of properties
  • JUS G.S2.641-1991 Pastics.Thermoplastic materials.Determination of Vicat softening temperature

Jilin Provincial Standard of the People's Republic of China, Ford's pp material

  • DB22/T 1696-2012 Determination of Arformoterol in Feed by Liquid Chromatography-Mass Spectrometry/Mass Spectrometry

CEN - European Committee for Standardization, Ford's pp material

  • PD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U@ PP and PE materials

AENOR, Ford's pp material

  • UNE-CEN/TS 14541:2008 EX Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials
  • UNE 61021:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE SILICA REFRACTORIES
  • UNE 61023:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF BOILED REFRACTORIES OF MAGNESIA-CHROME
  • UNE 61025:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF BOILED REFRACTORIES OF MAGNESIA-CHROME
  • UNE 61030:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF CARBON REFRACTORIES
  • UNE 61019:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF SILICOALUMINOUS REFRACTORIES
  • UNE 61031:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF SILICA CARBIDE
  • UNE 61029:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF CHROMITE REFRACTORIES
  • UNE 61028:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF DOLOMITE REFRACTORIES
  • UNE 61020:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF DEMI-SILICE
  • UNE 61027:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE FORSTERITE REFRACTORIES
  • UNE 61022:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE BOILED REFRACTORIES OF MAGNESIA
  • UNE-EN 16245-4:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
  • UNE-EN 16245-3:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
  • UNE 61009:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF VERY HIGH CONTENT IN ALUMINA. REFRACTORIES OF CORUNDUM
  • UNE 61014:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF ALUMINOSE REFRACTORIES. REFRACTORY OF 43 TO 45 % IN ALUMINA
  • UNE 61024:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF MAGNESIA-CHROME CHEMICALLY AGGLOMERATED
  • UNE 61026:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF MAGNESIA-CHROME CHEMICALLY AGGLOMERATED
  • UNE-EN ISO 19069-1:2015 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015)
  • UNE 61013:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF VERY HIGH CONTENT IN ALUMINA.
  • UNE 61017:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF ALUMINOUS REFRACTORIES. REFRACTORIES OF 35 TO 39 % ALUMINA
  • UNE 61018:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF ALUMINOUS REFRACTORIES. REFRACTORIES OF 30 TO 35 % ALUMINA
  • UNE 61015:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF ALUMINA REFRACTORIES. REFRACTORIES OF 41 TO 43 % OF ALUMINA

IX-SA, Ford's pp material

PL-PKN, Ford's pp material

  • PN E06301-1986 Ceramic insulating materials Classification and specification for individual materials

NATO - North Atlantic Treaty Organization, Ford's pp material

  • STANAG 2996-1998 Properties of Tentage Material (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additional information
  • STANAG 2996-2004 Properties of Tentage Material (ED 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additional information

ESDU - Engineering Sciences Data Unit, Ford's pp material

International Organization for Standardization (ISO), Ford's pp material

  • ISO/DIS 19069-2:1980 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

ES-UNE, Ford's pp material

  • UNE-EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)

Korean Agency for Technology and Standards (KATS), Ford's pp material

  • KS M ISO 19069-2:2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
  • KS C IEC 60404-4:2005 Magnetic materials - Part 4: Methods of measurement of d.c.magnetic properties of magnetically soft materials

American Society for Testing and Materials (ASTM), Ford's pp material

  • ASTM D4000-07 Standard Classification System for Specifying Plastic Materials

IT-UNI, Ford's pp material

NL-NEN, Ford's pp material

  • NEN 5917-1988 Aggregates for concrete Determination of content of very fine material

Lithuanian Standards Office , Ford's pp material

  • LST EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)

ES-AENOR, Ford's pp material

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ford's pp material

国家市场监督管理总局、中国国家标准化管理委员会, Ford's pp material

GM North America, Ford's pp material

International Electrotechnical Commission (IEC), Ford's pp material

SAE - SAE International, Ford's pp material

  • SAE J3021-2014 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials
  • SAE J3021-2021 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials

PT-IPQ, Ford's pp material

  • NP 3359-1988 Plastics Evaluation of fire response of rigid cellular plastics using a small comer configuration

  Ford's pp material, Ford pp material, Ford for PP material, Ford PP material.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved