ZH
RU
ES

Principle of colorimeter

Principle of colorimeter, Total:221 items.

In the international standard classification, Principle of colorimeter involves: Optics and optical measurements, Paper and board, Paint ingredients, Road vehicle systems, Paints and varnishes, Technical drawings, Products of the chemical industry, Nuclear energy engineering, Linear and angular measurements, Products of the textile industry, Plastics, Surface treatment and coating, Paint coating processes, Bearings, Screw threads, Water quality, Audio, video and audiovisual engineering, Non-destructive testing, Metrology and measurement in general, Electronic tubes, IT terminal and other peripheral equipment, Colour coding, Analytical chemistry, Optical equipment, Medical sciences and health care facilities in general, Piezoelectric and dielectric devices, Bridge construction, Computer graphics, Shipbuilding and marine structures in general, Test conditions and procedures in general, Measurement of volume, mass, density, viscosity, Construction industry, Iron and steel products, Farming and forestry, Measurement of fluid flow, Environmental testing, Mechanical testing.

American National Standards Institute （ANSI), Principle of colorimeter

ANSI/TAPPI T1215 sp-2012 The determination of instrumental color differences
ANSI/T 1215 SP-2021 The determination of instrumental color differences
ANSI/ASME Y14.43-2011 Dimensioning and Tolerancing Principles for Gages and Fixtures
ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

Professional Standard - Petrochemical Industry, Principle of colorimeter

SH/T 1833-2022 Determination of color difference for raw synthetic rubber – Colorimeter method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of colorimeter

GB/T 6689-1986 Determination of colour difference of dyes(Instrumental method)
GB/T 6688-2008 Dyestuffs.Determination of relative strength and color difference.Instrumental method
GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles
GB 11186.1-1989 The measurement method of the color of the coating film, the first part of the principle
GB 17149.7-1997 Diagnostic criteria and principles of management of skin discolouration induced by cosmetics

American Society for Testing and Materials (ASTM), Principle of colorimeter

ASTM D2244-15 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09b Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E805-12a Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E3040-18 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E3040-22 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E3040-16 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E805-01 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E805-01a Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E805-12 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E805-06 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E805-22 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7133-05 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7133-16 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D3271-87(1993)e1 Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis

German Institute for Standardization, Principle of colorimeter

DIN EN ISO 23131:2023-01 Ellipsometry - Principles (ISO 23131:2021); German version EN ISO 23131:2022
DIN EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
DIN EN 13523-3:2020 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German and English version prEN 13523-3:2020
DIN EN 13523-3:2022-01 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German version EN 13523-3:2021
DIN EN 13523-3:2023-08 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German and English version prEN 13523-3:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-3 (2022-01).
DIN EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; German version EN 13523-3:2001
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
DIN 50989-1:2018 Ellipsometry - Part 1: Principles; Text in German and English
DIN 55603:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method
DIN EN 13523-3:2022 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German version EN 13523-3:2021
DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
DIN EN 61966-8:2001-11 Multimedia systems and equipment - Colour measurement and management - Part 8: Multimedia colour scanners (IEC 61966-8:2001); German version EN 61966-8:2001
DIN 80010-1:1999 Visual display performance marine technology - Part 1: Selection of colours, association of colours, principles of design
DIN EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison; German version EN 13523-3:2014
DIN ISO 965-1/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data - Amendment 1 (ISO 965-1:2013/DAM 1:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as an amendment to DIN ISO 965-1 (2017-05).
DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
DIN ISO 9335:2015 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)
DIN 55603 Bb.1:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method - Calculation example and example of test report

Association Francaise de Normalisation, Principle of colorimeter

NF EN ISO 23131:2022 Ellipsométrie - Principes
NF EN 13523-3:2021 Tôles prélaquées - Méthodes d'essai - Partie 3 : différence de couleur et métamérisme - Comparaison au moyen d'instruments
NF T37-001-3*NF EN 13523-3:2021 Coil coated metals - Test methods - Part 3 : colour difference and metamerism - Instrumental comparison
NF T37-001-3:2014 Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison
NF A91-424:1988 Surface treatments - Anodized aluminium and aluminium alloys - Determination of colour and colour difference of coloured anodic coatings
NF E22-337-2*NF ISO 1132-2:2002 Rolling bearings - Tolerances - Part 2 : measuring and gauging principles and methods
NF ISO 965-1:2013 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales
NF EN ISO 16373-1:2016 Textiles - Colorants - Partie 1 : principes généraux d'essai des textiles colorés pour l'identification des colorants
NF EN 61966-8:2018 Systèmes et appareils multimédia - Mesure et gestion de la couleur Partie 8 : Numériseurs couleur
NF E03-051*NF ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: principles and basic data
NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
NF ISO 1132-2:2002 Roulements - Tolérances - Partie 2 : principes et méthodes de mesurage et de vérification par calibre
NF C90-608*NF EN 61966-8:2018 Multimedia systems and equipment - Colour measurement and management - Part 8 : Multimedia colour scanners
NF G07-010-1*NF EN ISO 105-A01:2010 Textiles - Tests for colour fastness - Part A01 : general principles of testing
NF G07-010-1:1996 Textiles. Tests for colour fastness. Part A01 : general principles of testing.
NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
NF ISO 965-1/A1:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales - Amendement 1
NF EN ISO 105-J01:2000 Textiles - Essais de solidité des teintures - Partie J01 : principes généraux du mesurage de la couleur de surface

Society of Automotive Engineers (SAE), Principle of colorimeter

SAE J1767-2014 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials
SAE J1767-2021 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials
SAE J1545-2014 Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim
SAE J1545-2005 Instrumental Color Difference Measurement for Exterior finishes, Textiles, and Colored Trim
SAE J1767-1995 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials, Recommended Practice
SAE J1545-1986 Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim, Recommended Practice June 1986

British Standards Institution (BSI), Principle of colorimeter

BS 3900-D8:1986 Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: principles
BS ISO 8015:2001 Technical drawings. Fundamental tolerancing principle
BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 105-J01:2000 Textiles - Tests for colour fastness - General principles for measurement of surface colour
BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
BS ISO 965-1:2013+A1:2021 ISO general purpose metric screw threads. Tolerances - Principles and basic data
BS 5100:1974 Guide to the principles of geometrical tolerancing (conforming to BS 308:Part 3:1972)
BS 4877:1972 Recommendations for general principles of nuclear reactor instrumentation
BS EN 61966-2-5:2010 Multimedia systems and equipment. Colour measurement and management. Colour management. Optional RGB colour space. opRGB
BS EN 61966-2-5:2008 Multimedia systems and equipment - Colour measurement and management - Colour management - Optional RGB colour space - opRGB
BS EN ISO 105-A01:1996 Textiles - Tests for colour fastness - General principles of testing
BS EN ISO 105-A01:2010 Textiles - Tests for colour fastness - General principles of testing
20/30425659 DC BS EN 13523-3. Coil coated metals. Test methods. Part 3. Colour difference. Instrumental comparison
BS EN 61966-8:2001 Multimedia systems and equipment. Colour measurement and management. Multimedia colour scanners
BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
BS ISO 15795:2002 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations
20/30423710 DC BS ISO 965-1 AMD1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
BS EN 10244-1:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles
21/30438772 DC BS ISO 965-1.2 AMD 1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
BS EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - General principles and requirements

SAE - SAE International, Principle of colorimeter

SAE J1545-2021 Instrumental Color Difference Measurement for Exterior Finishes@ Textiles and Colored Trim@ Recommended Practice

National Metrological Verification Regulations of the People's Republic of China, Principle of colorimeter

JJG 1151-2018 Liquid Chromatograph-Atomic Fluorescence Spectrometers

Canadian General Standards Board （CGSB), Principle of colorimeter

CGSB 1-GP-71 METH 12.1-1974 Methodes D'Essai Des Peintures Et Pigments Couleur Difference De Couleur Par Evaluation Instrumentale

FI-SFS, Principle of colorimeter

SFS 2105-1976

ES-UNE, Principle of colorimeter

UNE-EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
UNE-EN 13523-3:2022 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)

AT-ON, Principle of colorimeter

ONORM ISO 8015:1987 Technical drawings; fundamental tolerancing principle
OENORM EN 13523-3-2021 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
ONORM ISO 965 Teil.1:1983 ISO generalpurpose metric screw threads; Tolerances; Principles and basic data
ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments

AENOR, Principle of colorimeter

UNE 72036:1982 DIFFERENCES SPECIFICATION OF PSYCHOPHYSIES COLOUR
UNE-EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
UNE-EN 61966-8:2002 Multimedia systems and equipment - Colour measurement and management -- Part 8: Multimedia colour scanners.

Korean Agency for Technology and Standards (KATS), Principle of colorimeter

KS C IEC 60231:2012 General principles of nuclear reactor instrumentation
KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS C IEC 60231-2012(2022) General principles of nuclear reactor instrumentation
KS M ISO 7724-1-2007(2022) Paints and varnishes－Colorimetry－Part 1：Principles
KS M ISO 7724-1-2007(2017) Paints and varnishes－Colorimetry－Part 1：Principles
KS C IEC 60231D-2012(2022) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS F ISO 1803-2002(2017) Building construction－Tolerances－Expression of dimensional accuracy－Principles and terminology
KS M ISO 7724-1:2007 Paints and varnishes－Colorimetry－Part 1：Principles
KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
KS A 4054-2005 Radiographic image quality indicators for non-destructive testing-Principles and identification
KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
KS B ISO 9335-2016(2021) Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS B ISO 9335:2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS C IEC 60231A-2012(2022) General principal of nuclear reactor instrumentation－First supplement to publication 60231(1967)
KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS M ISO 217:2008 Paper-Untrimmed sizes-Designation and tolerances for primary and supplementary ranges, and indication of machine direction

Association of German Mechanical Engineers, Principle of colorimeter

VDI/VDE 2631 Blatt 1-1999 Form measurement - Principles for the measurement of geometrical deviations

RU-GOST R, Principle of colorimeter

GOST R ISO 105-A05-1999 Textiles. Tests for colour fastness. Part A05. Instrumental assessment of change in colour for determination of grey scale rating
GOST R 52489-2005 Paint materials. Colorimetry. Part 1. Principles
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST 30546.2-1998 Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods

SE-SIS, Principle of colorimeter

SIS SMS 1722-1973 Metric screw threads. Tolerances. Principles and basic data
SIS SMS 1722-1966 Metric screw threads. Tolerances. Principles and basic data
SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SEN 01 27 11-1968 Symbols for electrical diagrams Recording and reproducing apparatus and devices
SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices

International Organization for Standardization (ISO), Principle of colorimeter

ISO 7724-1:1984 Paints and varnishes; Colorimetry; Part 1 : Principles
ISO 965-1:1998 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
ISO 965-1:2013 ISO general purpose metric screw threads.Tolerances.Part 1: Principles and basic data
ISO 22324:2022 Security and resilience – Emergency management – Guidelines for colour-coded alert
ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 105-A01:1990 Textiles; tests for colour fastness; part A01: general principles of testing
ISO 965-1:2013/Amd 1:2021 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1
ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
ISO 965-1:1998/cor 1:2009 ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data; Technical Corrigendum 1

Danish Standards Foundation, Principle of colorimeter

DS/ISO 7724/1:1986 Paints and varnishes. Colorimetry. Part 1: Principles
DS/EN 13523-3:2021 Coil coated metals – Test methods – Part 3: Colour difference and metamerism – Instrumental comparison
DS/EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
DS/ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
DS/EN 61966-8:2002 Multimedia systems and equipment - Colour measurement and management - Part 8: Multimedia colour scanners

American Society of Mechanical Engineers (ASME), Principle of colorimeter

ASME Y14.5.1M-1994 Mathematical definition of dimensioning and tolerancing principles

CU-NC, Principle of colorimeter

NC 06-69-1969 ISO metric screw threads. Tolerances. Principies and basic data

Taiwan Provincial Standard of the People's Republic of China, Principle of colorimeter

CNS 3-12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 3-16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)

CH-SNV, Principle of colorimeter

VN-TCVN, Principle of colorimeter

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

European Committee for Standardization (CEN), Principle of colorimeter

CEN EN 13523-3-2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
EN 13523-3:2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
EN 13523-3:2021 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison

Lithuanian Standards Office , Principle of colorimeter

LST EN 13523-3-2002 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
LST EN 61966-8-2002 Multimedia systems and equipment. Colour measurement and management. Part 8: Multimedia colour scanners (IEC 61966-8:2001)

Indonesia Standards, Principle of colorimeter

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers

PT-IPQ, Principle of colorimeter

NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison

IT-UNI, Principle of colorimeter

UNI 7226-P2-1976

未注明发布机构, Principle of colorimeter

BS ISO 1803:1997(1999) Building construction — Tolerances — Expression of dimensional accuracy — Principles and terminology

HU-MSZT, Principle of colorimeter

Shanxi Provincial Standard of the People's Republic of China, Principle of colorimeter

DB14/T 591-2010 Taiyuan Green Foot Bath Industry Service Management Specifications
DB14/T 592-2010 Purchasing and distribution management specifications for green commercial chain enterprises in Taiyuan

Group Standards of the People's Republic of China, Principle of colorimeter

T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
T/CECA 83-2023 Lithium tantalate and lithium niobate reduced single crystal wafers— technical requirements and measurement methods for lightness and color difference
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle

KP-CSK, Principle of colorimeter

KPS 2551-1-2002 General purpose metric screw threads-Tolerances-Part 1:Principles and basic data

International Electrotechnical Commission (IEC), Principle of colorimeter

IEC 61966-2-5:2007 Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - opRGB

Japanese Industrial Standards Committee (JISC), Principle of colorimeter

JIS B 0217-1:2013 ISO metric trapezoidal screw threads.Tolerances .Part 1: Principles and basic data
JIS B 1515-2:2006 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
JIS Z 8317-1:2008 Technical drawings -- Indications of dimensions and tolerances -- Part 1: General principles

KR-KS, Principle of colorimeter

KS B ISO 9335-2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS B ISO 15795-2023 Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations
KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

国家技术监督局、中华人民共和国卫生部, Principle of colorimeter

GB/T 17149.7-1997 Disgnostic criteria and principles of management of skin discolouration induced by cosmetics

Hubei Provincial Standard of the People's Republic of China, Principle of colorimeter

DB42/T 1742-2021 Technical regulations for bridge vertical displacement monitoring based on the principle of liquid-gas coupling pressure difference

United States Navy, Principle of colorimeter

NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC

Anhui Provincial Standard of the People's Republic of China, Principle of colorimeter

DB34/T 910.3-2009 Management guidelines for standardized production bases of green food raw materials (tea)
DB34/T 1231-2010 Management Guidelines for Standardized Production Bases of Green Food Raw Materials (Rapeseed)
DB34/T 910.1-2009 Management guidelines for standardized production bases of green food raw materials (rice)
DB34/T 910.2-2009 Management Guidelines for Standardized Production Bases of Green Food Raw Materials (Wheat)
DB34/T 1520-2011 Anhui Province Green Food Raw Material (Soybean) Standardized Production Base Management Guidelines

VE-FONDONORMA, Principle of colorimeter

NORVEN 55-55-1963

CZ-CSN, Principle of colorimeter

CSN IEC 617-8:1993 Graphical symbols for diagrams. Part 8: Measuring instruments. lamps and signalling devices

European Committee for Electrotechnical Standardization（CENELEC）, Principle of colorimeter

EN 61966-8:2001 Multimedia Systems and Equipment - Colour Measurement and Management - Part 8: Multimedia Colour Scanners

American Gas Association, Principle of colorimeter

AGA TOMS-2003 The Theory and Operations of Meter Shop Sonic Nozzle Proving Systems for the Natural Gas Industry

Professional Standard - Aviation, Principle of colorimeter

HB 6247.4-1989 Basic product drawing management system (instrument, electrical specialty) Numbering principles for design documents