ZH
RU
ES

PSI

PSI, Total:500 items.

In the international standard classification, PSI involves: Valves, Components for aerospace construction, Materials for aerospace construction, Aerospace fluid systems and components, Fasteners for aerospace construction, Radiocommunications, On-board equipment and instruments, Rubber, Fuels, Metrology and measurement in general, Aerospace engines and propulsion systems, Fluid power systems, Road vehicle systems, Internal combustion engines, Pipeline components and pipelines.

Institute of Electrical and Electronics Engineers (IEEE), PSI

• IEEE PSI 10/D2, October 2010 IEEE Draft Standard for Use of the International System of Units (SI): The Modern Metric System
• IEEE PSI-10/D1, May 2010 IEEE Draft Standard for Use of the International System of Units (SI): The Modern Metric System
• IEEE/ASTM PSI 10/D3, October 2010 IEEE/ASTM Draft Standard for Metric Practice
• IEEE/ASTM PSI 10/D2, October 2015 IEEE/ASTM Draft American National Standard for Metric Practice
• IEEE/ASTM PSI 10/D3, October 2015 IEEE/ASTM Approved Draft American National Standard for Metric Practice

United States Navy, PSI

• NAVY MS26545 REV R NOTICE 1-1997 CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI, AND 2100 PSI
• NAVY MS26545 REV R-1991 CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI, AND 2100 PSI
• NAVY QPL-7905-51-2000 CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE SEAMLESS, 1800 PSI AND 2100 PSI
• NAVY QPL-7905-52 NOTICE 3-2008 Cylinders, Steel, Compressed Gas, Non-Shatterable Seamless, 1800 PSI and 2100 PSI
• NAVY QPL-7905-2013 Cylinders, Steel, Compressed Gas, Non-Shatterable, Seamless, 1800 PSI and 2100 PSI
• NAVY QPL-7905-QPD-2011 Cylinders, Steel, Compressed Gas, Non-Shatterable, Seamless, 1800 PSI and 2100 PSI
• NAVY MIL-DTL-7905 H-2003 CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI
• NAVY AN6207 REV 5-2011 VALVE, CHECK, 1500 PSI, HYDRAULIC
• NAVY MIL-DTL-85061 C VALID NOTICE 1-2013 Coupling, Fuel Line, Flexible, 125 PSI
• NAVY MS28890 REV B NOTICE 2-1996 VALVE, HYDRAULIC CHECK, 3000 PSI, FLARELESS, TYPE I SYSTEMS
• NAVY MS28890 REV B VALID NOTICE 1-1987 VALVE, HYDRAULIC CHECK, 3000 PSI, FLARELESS, TYPE I SYSTEMS
• NAVY MS28890 REV B-1956 VALVE, HYDRAULIC CHECK, 3000 PSI, FLARELESS, TYPE I SYSTEMS
• NAVY MS28892 REV A NOTICE 1-1997 VALVE, 3,000 PSI HYDRAULIC CHECK, FLARELESS, TYPE II SYSTEMS
• NAVY MS28892 REV A-1986 VALVE, 3,000 PSI HYDRAULIC CHECK, FLARELESS, TYPE II SYSTEMS
• NAVY MS28720 REV A NOTICE 2-1996 FILTER, AIRCRAFT HYDRAULIC LINE TYPE 3, 3000 PSI
• NAVY MS28720 REV A VALID NOTICE 1-1987 FILTER, AIRCRAFT HYDRAULIC LINE TYPE 3, 3000 PSI
• NAVY MS28720 REV A-1956 FILTER, AIRCRAFT HYDRAULIC LINE TYPE 3, 3000 PSI
• NAVY MS28771 REV C NOTICE 1-1999 VALVE, CHECK, HYDRAULIC, FLARED, 3,000 PSI, TYPE II SYSTEMS
• NAVY MS28771 REV C-1991 VALVE, CHECK, HYDRAULIC, FLARED, 3,000 PSI, TYPE II SYSTEMS
• NAVY MIL-DTL-22263 C-2009 COUPLING FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR
• NAVY MIL-DTL-81940/4 B-2011 VALVE, SAMPLING AND BLEED, HYDRAULIC, 3000 PSI NON-AIRCRAFT APPLICATIONS
• NAVY MS28765 REV C NOTICE 1-1999 VALVE, CHECK, HYDRAULIC, INTERNAL PORTS, 3,000 PSI, TYPE II SYSTEMS
• NAVY MS28765 REV C-1986 VALVE, CHECK, HYDRAULIC, INTERNAL PORTS, 3,000 PSI, TYPE II SYSTEMS
• NAVY MS28766 REV B-2006 VALVE, SHUTTLE, HYDRAULIC, DIRECT MOUNTING, 3000 PSI TYPE II SYSTEMS

Society of Automotive Engineers (SAE), PSI

• SAE AS5103A-2014 FITTING ASSEMBLY, PLUG, RING LOCKED PORT CONNECTION, 4000 PSI AND 5000 PSI
• SAE AS1580D-2012 Ring, Weld, 3000 psi Titanium
• SAE AMS2607A-1944 PRESSURE TESTING 100 psi
• SAE AMS2605D-1995 PRESSURE TESTING 55 psi
• SAE AMS2601B-1944 PRESSURE TESTING 10 psi
• SAE AMS2602A-1944 PRESSURE TESTING 25 psi
• SAE AMS2607D-1995 PRESSURE TESTING 100 psi
• SAE AMS2606E-1995 PRESSURE TESTING 70 psi
• SAE AMS2606B-1944 PRESSURE TESTING 70 psi
• SAE AMS2602D-1995 PRESSURE TESTING 25 psi
• SAE AMS2605A-1944 PRESSURE TESTING 55 psi
• SAE AS1580B-2007 RING, WELD, 3000 psi, TITANIUM
• SAE AS1893E-2013 Ring, Weld, 3000 psi, Cres
• SAE AS5986C-2013 Fitting Assembly, Adapter Ring Locked Port Connection to Beam Seal 4000 PSI and 5000 PSI /9/
• SAE AS1986C-2005 Fitting Assembly, Adapter, Ring Locked Port Connection to Beam Seal 4000 psi and 5000 psi
• SAE AS5103-2007 FITTING ASSEMBLY, PLUG, RING LOCKED PORT CONNECTION, 4000 psi AND 5000 psi /8/
• SAE AMS3346A-1962 SILICONE RUBBER 1000 psi (55 - 65)
• SAE AMS3344-1961 SILICONE RUBBER 1800 psi (45 - 55)
• SAE AMS3345B-1965 SILICONE RUBBER 1000 psi 45-55
• SAE AMS3346-1956 SILICONE RUBBER 1000 psi (55 - 65)
• SAE AMS3345A-1961 SILICONE RUBBER 1000 psi (45 - 55)
• SAE AMS3346B-1965 SILICONE RUBBER 1000 psi 55 - 65
• SAE AMS3345-1956 SILICONE RUBBER 1000 psi (45 - 55)
• SAE AS1893B-2007 RING, WELD, 3000 psi, CRES
• SAE AMS3346H-2019 Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
• SAE AS5986-2005 Fitting Assembly, Adapter Ring Locked Port Connection to Beam Seal 4000 PSI and 5000 PSI /9/
• SAE AS1986B-1994 Fitting Assembly, Adapter, Ring Locked Port Connection to Beam Seal 4000 psi and 5000 psi (Reaffirmed: 01 Oct 2000)
• SAE AMS2607B-1977 PRESSURE TESTING 100 psi (690 kPa)
• SAE AMS2602B-1977 PRESSURE TESTING 25 psi (172 kPa)
• SAE AMS2606C-1978 PRESSURE TESTING 70 psi (483 kPa)
• SAE AMS2601C-1975 PRESSURE TESTING 10 psi (69 kPa)
• SAE AMS2605B-1978 PRESSURE TESTING 55 psi (380 kPa)
• SAE AS1583A-1986 TEE - TUBE WELD, 3000 PSI. HYDRAULIC
• SAE AMS6386B-1994 STEEL SHEET AND PLATE Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength
• SAE AS1986B-2005 FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 psi AND 5000 psi /9/
• SAE AMS6386C-2011 Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength
• SAE AS1584A-1986 ELBOW 90°, TUBE WELD, 3000 PSI. HYDRAULIC
• SAE AS1584-1980 ELBOW 90°, TUBE WELD, 3000 PSI HYDRAULIC
• SAE AS1580-1980 RING, TUBE WELD, 3000 PSI HYDRAULIC, TITANIUM
• SAE AS1893-1986 RING, TUBE WELD, 3000 PSI HYDRAULIC, CRES
• SAE AS1580A-1986 RING, TUBE WELD, 3000 PSI HYDRAULIC, TITANIUM
• SAE AS1583-1980 TEE-TUBE WELD, 3000 PSI HYDRAULIC
• SAE AS1875-2007 BOSS, LOW PRESSURE (500 psi) STANDARD DIMENSIONS FOR
• SAE AS6302-1999 Transmitter, Pressure, Fuel, 0-600 psi
• SAE AS4510-1996 Fittings, Weld, Fluid Connection, 5000 psi
• SAE AMS3347-1967 SILICONE RUBBER 1200 psi, High Modulus 45 - 55
• SAE AMS3349-1969 SILICONE RUBBER 1100 psi, High Resilience 65 - 75
• SAE AMS2616A-1974 PRESSURE TESTING, HYDRAULIC 200 psi (1380 kPa)
• SAE AMS2625A-1974 PRESSURE TESTING, HYDRAULIC 2500 psi (17,200 kPa)
• SAE AMS2620A-1974 PRESSURE TESTING, HYDRAULIC 1000 psi (6900 kPa)
• SAE AS4510-2013 Fittings, Weld, Fluid Connection, 5000 psi
• SAE AMS5316A-1970 DUCTILE (NODULAR) IRON CASTINGS, SAND 80,000 psi Tensile
• SAE AMS5315A-1970 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi Tensile
• SAE AS1583B-2007 FITTING, TEE, INTEGRAL WELD RING, 3000 psi
• SAE AS6302-2007 Transmitter, Pressure, Fuel, 0-600 psi
• SAE AS28889-1999 Valve, Air, High Pressure Charging, 5000 psi FSC 4820
• SAE AS1585E-2012 Fitting, Reducer, Integral Weld Ring, 3000 psi
• SAE J748-2008 Hydraulic Directional Control Valves, 3000 psi Maximum
• SAE J748-1986 HYDRAULIC DIRECTIONAL CONTROL VALVES, 3000 PSI MAXIMUM
• SAE AMS4928-1957 TITANIUM ALLOY 6Al - 4V Annealed - 120,000 psi Yield
• SAE AS1585C-2004 FITTING, REDUCER, INTEGRAL WELD RING, 3000 PSI
• SAE AMS3306-1986 SILICONE RUBBER 1200 psi (8.25 MPa), High Modulus 55 - 65
• SAE AS4213-1992 PLUG, BEAM SEAL, MALE 4000 psi, HYDRAULIC
• SAE AS4211-1992 CROSS, BEAM SEAL, MALE 4000 psi, HYDRAULIC
• SAE AMS4923-1955 TITANIUM ALLOY 2Cr - 2Fe - 2Mo Annealed - 120,000 psi Yield
• SAE AS4210-1992 TEE, BEAM SEAL, MALE 4000 psi, HYDRAULIC
• SAE AS1584B-2007 FITTING, ELBOW, 90°, INTEGRAL WELD RING, 3000 psi
• SAE AMS5636A-1952 STEEL, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Cold Drawn - 100,000 psi
• SAE AMS5636-1949 STEEL, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Cold Drawn - 100,000 psi
• SAE AMS5637-1949 STEEL, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Cold Drawn - 125,000 psi
• SAE AMS5637A-1952 STEEL, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Cold Drawn - 125,000 psi
• SAE AS4393C-2020 Nut, Self-Locking, UNS S66286, 1200 °F, 160,000 psi, UNJ Thread
• SAE AS1875-1992 Boss, Low Pressure (500 psi) Standard Dimensions for
• SAE AMS3306B-1998 Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
• SAE AMS3306C-2014 Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
• SAE AMS3346C-1976 SILICONE RUBBER 1000 psi (6.9 MPa) Tensile Strength 55-65
• SAE AMS3346D-1983 SILICONE RUBBER 1000 psi (6.90 MPa) Tensile Strength 55 - 65
• SAE AMS3345D-2011 SILICONE RUBBER 1000 psi (6.90 MPa) Tensile Strength 45 - 55
• SAE AMS3345C-1976 SILICONE RUBBER 1000 psi (6.9 MPa) Tensile Strength 45 - 55
• SAE AMS3345E-2001 Silicone Rubber 1000 psi (6.90 MPa) Tensile Strength 45 - 55
• SAE AMS3306B-2007 Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
• SAE AMS3347B-2003 RUBBER, SILICONE 1200 psi (8.27 MPa), High Modulus 45 - 55
• SAE AMS3306A-1995 RUBBER, SILICONE 1200 psi (8.27 MPa), High Modulus 55 - 65
• SAE AS4541-2013 ELBOW, 45°, BEAM SEAL, MALE 4000 PSI, HYDRAULIC
• SAE AS1579A-1986 FITTING END, WELDED GIRTH JOINT, DIMENSIONS, 3000 PSI HYDRAULIC
• SAE AS1579-1980 FITTING END, WELDED GIRTH JOINT, DIMENSIONS, 3000 PSI HYDRAULIC
• SAE AS4393C-2015 Nut@ Self-Locking@ UNS S66286@ 1200 �� 160@000 psi@ UNJ Thread
• SAE AS4393B-2006 Nut, Self-Locking, UNS S66286, 1200 °F, 160 000 psi, UNJ Thread
• SAE AMS4969-2002 Titanium Alloy, 5.4al 1.4cr 1.3fe 1.25mo Annealed 135,000 Psi Yield
• SAE AMS4929-2002 Titanium Alloy, 5.4al 1.4cr 1.3fe 1.25mo Annealed 135,000 Psi Yield
• SAE AS1581A-1986 SLEEVE, FLARELESS TUBE END, WELDED, HYDRAULIC 3000 PSI.
• SAE AS629-1993 HOSE ASSEMBLY, 3000 PSI, TFE, FLARED, STRAIGHT TO 90°, HEAVYWEIGHT
• SAE AMS5316-1954 DUCTILE IRON CASTINGS (NODULAR) 80,000 psi Tensile
• SAE AMS5315-1954 DUCTILE IRON CASTINGS (NODULAR) 60,000 psi Tensile
• SAE AMS5501-1967 STEEL FOIL, CORROSION RESISTANT 19Cr - 9Ni (SAE 30304) Cold Rolled, 125,000 psi
• SAE AMS5501A-1971 STEEL FOIL, CORROSION RESISTANT 19Cr - 9.5Ni (SAE 30304) Cold Rolled, 125,000 psi
• SAE AIR4002-2004 8000 psi Hydraulic Systems: Experience and Test Results
• SAE AS1584E-2013 Fitting, Elbow, 90 Degree, Integral Weld Ring, 3000 psi
• SAE AS4542-2013 ELBOW, 90°, BEAM SEAL, MALE 4000 psi, HYDRAULIC
• SAE AS4541A-2022 ELBOW, 45°, BEAM SEAL, MALE, 4000 PSI, HYDRAULIC
• SAE AS5969C-2012 Fitting Assembly, Union, Axially Swaged, Hydraulic, 5080 PSI
• SAE AS85421/6-2005 Fitting, Cross, Beam Seal, 3000/4000 PSI, Male Ends
• SAE AS18280E-2010 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
• SAE AMS3348-1969 SILICONE RUBBER 1150 psi Tensile Strength, High Resiliency 25 - 35
• SAE AS1582-1980 UNION, FLARELESS TUBE END, WELDED, 3000 PSI HYDRAULIC
• SAE AS1582A-1986 UNION, FLARELESS TUBE END, WELDED, 3000 PSI HYDRAULIC
• SAE AMS5519N-2014 Steel, Corrosion Resistant, Sheet and Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength
• SAE AS5969D-2012 FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI
• SAE AS5969F-2019 FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI
• SAE AS18280G-2019 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
• SAE AS18280F-2017 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
• SAE AS18280A-2004 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
• SAE AMS4942C-1994 TITANIUM TUBING, SEAMLESS Annealed, 40,000 psi (275 MPa) Yield Strength
• SAE AMS4941C-1994 Titanium Tubing, Welded Annealed, 40,000 psi (275 MPa) Yield Strength
• SAE AS1581-1980 SLEEVE, FLARELESS TUBE END, WELDED, HYDRAULIC 3000 PSI
• SAE AS632-1993 HOSE ASSEMBLY, 3000 PSI, TFE, FLARED, 90° TO 90°, HEAVYWEIGHT
• SAE AS630-1993 HOSE ASSEMBLY, 3000 PSI, TFE, FLARED, 45° TO 45°, HEAVYWEIGHT
• SAE AS628-1993 HOSE ASSEMBLY, 3000 PSI, TFE, FLARED, STRAIGHT TO 45°, HEAVYWEIGHT
• SAE AS631-1993 HOSE ASSEMBLY, 3000 PSI, TFE, FLARED, 45° TO 90°, HEAVYWEIGHT
• SAE AS627-1993 HOSE ASSEMBLY, 3000 PSI, TFE, FLARED, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
• SAE AMS5315B-1981 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (414 MPa) Tensile Strength
• SAE AMS5518B-1947 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (Cold Rolled - 150,000 psi)
• SAE AMS5517B-1947 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (Cold Rolled - 125,000 psi)
• SAE AMS5517C-1948 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (Cold Rolled - 125,000 psi)
• SAE AMS5518C-1952 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni Cold Rolled - 150,000 psi
• SAE AMS5519E-1952 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni Cold Rolled - 185,000 psi
• SAE AMS5517D-1952 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni Cold Rolled - 125,000 psi
• SAE AMS5519C-1947 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (Cold Rolled - 185,000 psi)
• SAE AS4444-2013 Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi
• SAE AS5972H-2020 FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC, 5080 PSI
• SAE AS5969G-2021 FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC 5080 PSI
• SAE AS5259/2A-2021 CRIMPING TOOL AND ACCESSORIES, HYDRAULIC PUMPS, 10000 PSI MINIMUM
• SAE AS5973-2006 FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI FSC 4730
• SAE AS5972D-2012 Fitting Assembly, Tee, Axially Swaged, Hydraulic, 5080 PSI
• SAE AS18280A-2000 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
• SAE AS18280B-2005 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
• SAE J748-1957 Hydraulic Directional Control Valves, 3000 psi Maximum, Recommended Practice
• SAE AS4212-1992 UNION, REDUCER, BEAM SEAL MALE, 4000 psi, HYDRAULIC
• SAE AS5356A-2015 Coupling, Fuel Line, Flexible, 125 psi General Specification for

SAE - SAE International, PSI

• SAE AS1893C-2009 RING@ WELD@ 3000 PSI@ CRES
• SAE AS1580C-2009 RING@ WELD@ 3000 PSI@ TITANIUM
• SAE AS1893D-2012 RING@ WELD 3000 PSI@ CRES
• SAE AS1893B-1996 Ring, Weld, 3000 psi, Cres
• SAE AS1580B-1996 Ring, Weld, 3000 psi Titanium
• SAE AS1580E-2013 RING@ WELD 3000 PSI@ TITANIUM
• SAE AMS2605E-2004 Pressure Testing 55 psi
• SAE AMS2602E-2004 Pressure Testing 25 psi
• SAE AMS2606F-2004 Pressure Testing 70 psi
• SAE AMS2607E-2004 Pressure Testing 100 psi
• SAE AMS3344A-1985 Silicone Rubber 1800 psi 45-55
• SAE AMS3344B-1997 Silicone Rubber 1800 psi 45-55
• SAE AMS2601E-1988 PRESSURE TESTING@ AIR 10 psi
• SAE AS8528-2018 FITTING@ TEE@ BEAM SEAL@ 5000 PSI
• SAE AMS2625C-1988 Pressure Testing@ Hydraulic 2500 psi
• SAE AMS2620D-1993 Pressure Testing@ Hydraulic 1000 psi
• SAE AMS2625D-1993 Pressure Testing@ Hydraulic 2500 psi
• SAE AMS2616C-1988 Pressure Testing@ Hydraulic 200 psi
• SAE AMS2616D-1993 Pressure Testing@ Hydraulic 200 psi
• SAE AMS2620C-1988 Pressure Testing@ Hydraulic 1000 psi
• SAE AS1583B-1996 TEE - TUBE WELD, 3000 PSI. HYDRAULIC
• SAE AMS4921A-1957 TITANIUM Annealed – 70@000 psi Yield
• SAE AS8530-2018 FITTING@ CROSS@ BEAM SEAL@ 5000 PSI
• SAE AS8532-2018 FITTING@ UNION@ BEAM SEAL@ 5000 PSI
• SAE AMS2625E-2001 Pressure Testing@ Hydraulic 2500 psi
• SAE AMS2620E-2001 Pressure Testing@ Hydraulic 1000 psi
• SAE AMS2616E-2001 Pressure Testing@ Hydraulic 200 psi
• SAE AS5986B-2010 FITTING ASSEMBLY@ ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
• SAE AS1986D-2010 FITTING ASSEMBLY@ ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
• SAE AS5986A-2008 FITTING ASSEMBLY@ ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
• SAE AS1986E-2011 FITTING ASSEMBLY@ ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
• SAE AS1986F-2015 FITTING ASSEMBLY@ ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
• SAE AS5986D-2015 FITTING ASSEMBLY@ ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
• SAE AMS4921-1952 TITANIUM 99Ti Annealed – 70@000 psi Yield
• SAE AS1585D-2009 FITTING@ REDUCER@ INTEGRAL WELD RING@ 3000 PSI
• SAE AS1585F-2013 FITTING@ REDUCER@ INTEGRAL WELD RING@ 3000 PSI
• SAE AS8531-2018 FITTING@ ELBOW@ 90°@ BEAM SEAL BULKHEAD@ 5000 PSI
• SAE AS28889A-2008 VALVE@ AIR@ HIGH PRESSURE CHARGING@ 5000 PSI
• SAE AS8529-2018 FITTING@ ELBOW@ 45°@ BEAM SEAL BULKHEAD@ 5000 PSI
• SAE AS8439-2018 FITTING@ CAP ASSEMBLY@ BEAM SEAL@ HYDRAULIC@ 5000 PSI
• SAE AMS6386B-1974 Steel Sheet and Plate Low Alloy@ Heat Treated 90@000 psi (621 MPa) and 100@000 psi (690 MPa) Yield Strength
• SAE AMS6386D-2016 Steel Sheet and Plate Low Alloy@ Heat Treated 90@000 psi (621 MPa) and 100@000 psi (690 MPa) Yield Strength
• SAE AMS2604F-1994 Pressure Testing@ Gaseous Media 40 psi
• SAE AMS2601F-1994 Pressure Testing@ Gaseous Media 10 psi
• SAE AS5969E-2017 FITTING ASSEMBLY@ UNION@ AXIALLY SWAGED@ HYDRAULIC 5080 PSI
• SAE AS5969D-2013 FITTING ASSEMBLY@ UNION@ AXIALLY SWAGED@ HYDRAULIC 5080 PSI
• SAE AS5969-2006 FITTING ASSEMBLY@ UNION@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5969B-2008 FITTING ASSEMBLY@ UNION@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS1583D-2012 FITTING@ TEE@ INTEGRAL WELD RING@ 3000 PSI
• SAE AS5972-2006 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5972A-2006 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS1583C-2009 FITTING@ TEE@ INTEGRAL WELD RING@ 3000 PSI
• SAE AMS2601G-2004 Pressure Testing@ Gaseous Media 10 psi
• SAE AS8440-2018 FITTING@ PLUG@ BEAM SEAL@ HYDRAULIC@ 5000 PSI
• SAE AS6302A-2016 Transmitter@ Pressure@ Fuel@ 0-600 psi
• SAE AS4510A-2019 Fittings, Weld, Fluid Connection, 5000 psi
• SAE AS1583E-2013 FITTING@ TEE@ INTEGRAL WELD RING@ 3000 PSI
• SAE AMS2604G-2004 Pressure Testing@ Gaseous Media 40 psi
• SAE AS18280/1C-2017 Sleeve@ Bite Type@ 24° Cone Flareless Fitting@ 3000 psi
• SAE J748-2014 Hydraulic Directional Control Valves, 3000 psi Maximum
• SAE J748-2019 Hydraulic Directional Control Valves@ 3000 psi Maximum@ Recommended Practice
• SAE AS5971C-2014 FITTING ASSEMBLY@ ELBOW@ 45°@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5970C-2014 FITTING ASSEMBLY@ ELBOW@ 90°@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5970-2006 FITTING ASSEMBLY@ ELBOW@ 90°@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5971A-2007 FITTING ASSEMBLY@ ELBOW@ 45°@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5970A-2007 FITTING ASSEMBLY@ ELBOW@ 90°@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5971-2006 FITTING ASSEMBLY@ ELBOW@ 45°@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AMS4942-1964 Titanium Tubing@ Seamless Annealed@ 40@000 psi@ Yield
• SAE AMS4941-1956 Titanium Tubing@ Welded Annealed -40@000 psi Yield
• SAE AS8460-2019 FITTING@ UNION@ REDUCER@ BEAM SEAL@ 5000 psi
• SAE AS8461-2019 FITTING@ UNION@ BULKHEAD@ BEAM SEAL@ 5000 psi
• SAE AMS3347A-1986 Silicone Rubber 1200 psi (8.25 MPa)@ High Modulus 45 - 55
• SAE AS85421/12B-2006 Fitting@ Elbow@ 90 Degree@ Beam Seal@ 3000/4000 psi@ Male to Male
• SAE AS85421/13B-2006 Fitting@ Elbow@ 90 Degree@ Beam Seal@ 3000/4000 psi@ Bulkhead@ Male Ends
• SAE AS85421/12A-2002 Fitting@ Elbow@ 90 Degree@ Beam Seal@ 3000/4000 psi@ Male to Male
• SAE AS85421/13A-2002 Fitting@ Elbow@ 90 Degree@ Beam Seal@ 3000/4000 psi@ Bulkhead@ Male Ends
• SAE AS85421/12-2001 Fitting@ Elbow@ 90 Degree@ Beam Seal@ 3000/4000 psi@ Male to Male
• SAE AS85421/13-2001 Fitting@ Elbow@ 90 Degree@ Beam Seal@ 3000/4000 psi@ Bulkhead@ Male Ends
• SAE AS630B-2000 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
• SAE AS630A-1999 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
• SAE AS629B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 90°@ HEAVYWEIGHT
• SAE AS628B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
• SAE AS6121C-2016 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED@ HYDRAULIC@ UP TO 1500 PSI
• SAE AS631A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 90°@ HEAVYWEIGHT
• SAE AS631B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 90°@ HEAVYWEIGHT
• SAE AS623A-1999 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO 90°@ HEAVYWEIGHT
• SAE AS623B-2000 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO 90°@ HEAVYWEIGHT
• SAE AS629A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 90°@ HEAVYWEIGHT
• SAE AS628A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
• SAE AS632B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 90° TO 90°@ HEAVYWEIGHT
• SAE AS632A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 90° TO 90°@ HEAVYWEIGHT
• SAE AS5972F-2016 FITTING ASSEMBLY@ TEE AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5972G-2017 FITTING ASSEMBLY@ TEE AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5978-2006 FITTING ASSEMBLY@ 45°@ FEMALE FLARELESS@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5767-2007 FITTING ASSEMBLY@ TEE@ FEMALE FLARELESS@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AMS4908A-1957 TITANIUM ALLOY SHEET 8Mn Annealed - 110@000 psi Yield
• SAE AMS4925-1952 TITANIUM ALLOY 4A1 - 4Mn Annealed 130@000 psi Yield
• SAE AMS4928A-1961 TITANIUM ALLOY 6Al - 4V Annealed@ 120@000 psi Yield
• SAE AMS4908-1952 TITANIUM ALLOY SHEET 8Mn Annealed - 110@000 psi Yield
• SAE AMS4925A-1957 TITANIUM ALLOY 4Al - 4Mn Annealed - 130@000 psi Yield
• SAE AS630C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
• SAE AS621C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO STRAIGHT@ HEAVYWEIGHT
• SAE AS623C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO 90°@ HEAVYWEIGHT
• SAE AS628C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
• SAE AS621-1984 Hose Assembly@ 3000 psi@ TFE@ Flareless@ Straight to Straight@ Heavyweight
• SAE AMS4901B-1955 TITANIUM SHEET AND STRIP Annealed - 70@000 psi Yield
• SAE AMS4900A-1955 TITANIUM SHEET AND STRIP Annealed - 55@000 psi Yield
• SAE AMS4900-1952 TITANIUM SHEET AND STRIP Annealed - 55@000 psi Yield
• SAE AMS4901A-1954 TITANIUM SHEET AND STRIP Annealed - 70@000 psi Yield
• SAE AS5970B-2012 FITTING ASSEMBLY@ ELBOW@ 90 DEGREE@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS5971B-2012 FITTING ASSEMBLY@ ELBOW@ 45 DEGREE@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS6121-2011 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED@ HYDRAULIC@ UP TO 1500 PSI
• SAE AS6121A-2013 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED@ HYDRAULIC@ UP TO 1500 PSI
• SAE AS85421/12C-2008 FITTING@ ELBOW@ 90°@ BEAM SEAL@ 3000/4000 PSI@ MALE TO MALE
• SAE AS85421/13C-2008 FITTING@ ELBOW@ 90°@ BEAM SEAL@ 3000/4000 PSI@ BULKHEAD MALE ENDS
• SAE AS6121B-2015 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED@ HYDRAULIC@ UP TO 1500 PSI
• SAE AMS5636G-2018 Steel@ Corrosion-Resistant@ Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength (UNS S30200)
• SAE AS8534-2018 FITTING ASSEMBLY@ ELBOW@ 90°@ BEAM SEAL@ RETAINED NUT@ 5000 PSI
• SAE AS629D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 90°@ HEAVYWEIGHT
• SAE AS628D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
• SAE AS6117A-2015 FITTING ASSEMBLY@ UNION@ AXIALLY SWAGED@ HYDRAULIC@ UP TO 1500 PSI
• SAE AS630D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
• SAE AS6121D-2016 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED@ HYDRAULIC@ UP TO 1500 PSI
• SAE AS8536-2018 FITTING ASSEMBLY@ ELBOW@ 45°@ BEAM SEAL@ RETAINED NUT@ 5000 PSI
• SAE AS632D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 90° TO 90°@ HEAVYWEIGHT
• SAE AS631D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 90°@ HEAVYWEIGHT
• SAE AS1875A-2013 Boss@ Low Pressure (500 psi) Standard Dimensions For
• SAE AS6383-2017 FITTING ASSEMBLY@ REDUCER WITH SOLID FILM LUBRICANT@ RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /8/
• SAE AMS3306A-1991 Rubber@ Silicone 1200 psi (8.27 MPa)@ High Modulus 55 - 65
• SAE AS85421/16B-2006 Fitting@ Tee@ Beam Seal@ 3000/4000 psi@ Bulkhead on Run@ Male Ends
• SAE AS85421/17B-2006 Fitting@ Tee@ Beam Seal@ 3000/4000 psi@ Bulkhead on Branch@ Male Ends
• SAE AS85421/16A-2002 Fitting@ Tee@ Beam Seal@ 3000/4000 psi@ Bulkhead on Run@ Male Ends
• SAE AS85421/17A-2002 Fitting@ Tee@ Beam Seal@ 3000/4000 psi@ Bulkhead on Branch@ Male Ends
• SAE AS85421/17-2001 Fitting@ Tee@ Beam Seal@ 3000/4000 psi@ Bulkhead on Branch@ Male Ends
• SAE AS85421/16-2001 Fitting@ Tee@ Beam Seal@ 3000/4000 psi@ Bulkhead on Run@ Male Ends
• SAE AMS5501D-1996 Sheet@ Corrosion Resistant@ Sheet@ Strip@ and Foil 19Cr - 9.5Ni (304) Cold Rolled@ 125 ksi (862 MPa) Tensile Strength (UNS S30400)
• SAE AS1584C-2009 FITTING@ ELBOW@ 90 DEGREES@ INTEGRAL WELD RING@ 3000 PSI
• SAE AS1584D-2012 FITTING@ ELBOW@ 90 DEGREE@ INTEGRAL WELD RING@ 3000 PSI
• SAE AMS4900B-1963 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi Yield
• SAE AMS4900C-1968 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi Yield
• SAE AMS4911-1957 TITANIUM ALLOY SHEET 6Al – 4V Annealed – 120@000 psi Yield
• SAE AMS4901C-1963 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi Yield
• SAE AMS4902B-1968 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 40@000 psi Yield
• SAE AMS4902A-1963 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 40@000 psi Yield
• SAE AMS4921B-1969 TITANIUM BARS@ FORGINGS@ AND RINGS Annealed@ 70@000 psi Yield
• SAE AMS4901D-1968 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi Yield
• SAE AS622-1984 Hose Assembly@ 3000 psi@ TFE@ Flareless@ Straight to 45 Degree@ Heavyweight
• SAE AS623-1984 Hose Assembly@ 3000 psi@ TFE@ Flareless@ Straight to 90 Degrees@ Heavyweight
• SAE AS5869-2006 FITTING ASSEMBLY@ UNION@ 3 HOLE FLANGE@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS85421/16C-2008 FITTING@ TEE@ BEAM SEAL@ 3000/4000 PSI@ BULKHEAD ON RUN@ MALE ENDS
• SAE AS85421/17C-2008 FITTING@ TEE@ BEAM SEAL@ 3000/4000 PSI@ BULKHEAD ON BRANCH@ MALE ENDS
• SAE AIR4002-1994 8000 psi Hydraulic Systems: Experience and Test Results
• SAE AS85421/16D-2017 FITTING@ TEE@ BEAM SEAL@ 3000/4000 PSI@ BULKHEAD ON RUN@ MALE ENDS
• SAE AS6119-2011 FITTING ASSEMBLY@ ELBOW@ 90° AXIALLY SWAGED@ HYDRAULIC@ UP TO 1500 PSI
• SAE AMS5501F-2019 Steel@ Corrosion Resistant@ Sheet@ Strip@ and Foil 19Cr - 9.5Ni (304) Cold Rolled@ 125 ksi (862 MPa) Tensile Strength (UNS S30400)
• SAE AS8535-2018 FITTING ASSEMBLY@ TEE@ BEAM SEAL@ RETAINED NUT ON RUN@ 5000 PSI
• SAE AIR4002A-2012 8000 psi Hydraulic Systems: Experience and Test Results
• SAE AS4542-1992 Elbow@ 90 Degrees@ Beam Seal@ Male 4000 psi@ Hydraulic
• SAE AS4444-1996 Fittings@ 24 Degree Cone Flareless@ Fluid Connection@ 5000 psi
• SAE AS85421/3A-2002 Fitting@ Tee@ Reducer@ Beam Seal@ 3000/4000 psi@ 3 Male Ends
• SAE AS85421/3-2002 Fitting@ Tee@ Reducer@ Beam Seal@ 3000/4000 psi@ 3 Male Ends
• SAE AMS5519H-1984 Steel@ Sheet and Strip@ Corrosion Resistant 18Cr – 8Ni (SAE 30301) Cold Rolled@ 185@000 psi (1275 MPa) Tensile Strength (UNS S30100)
• SAE AS627B-2000 Hose Assembly@ 3000 psi@ PTFE@ Flared@ Straight to Straight@ Heavyweight
• SAE AS627A-1999 Hose Assembly@ 3000 psi@ PTFE@ Flared@ Straight to Straight@ Heavyweight
• SAE AS1582D-1996 UNION, FLARELESS TUBE END, WELDED, 3000 PSI HYDRAULIC
• SAE AMS4966B-1966 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi Yield
• SAE AMS4966C-1969 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi Yield
• SAE AMS4966A-1965 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi Yield
• SAE AMS4966-1959 Titanium Alloy Forgings 5Al - 2.5Sn Annealed - 110@000 psi Yield
• SAE AS627C-2001 Hose Assembly@ 3000 psi@ PTFE@ Flared@ Straight to Straight@ Heavyweight
• SAE AMS4902-1955 TITANIUM SHEET AND STRIP Annealed – 40@000 psi Yield
• SAE AS5973A-2014 FITTING ASSEMBLY@ CROSS@ AXIALLY SWAGED@ HYDRAULIC@ 5080 PSI
• SAE AS85421/3C-2008 FITTING@ TEE@ REDUCER@ BEAM SEAL@ 3000/4000 PSI@ 3 MALE ENDS
• SAE AS85421/9-2005 FITTING ASSEMBLY@ CROSS@ REDUCER BEAM SEAL@ 3000/4000 PSI@ 4 FEMALE ENDS
• SAE AS5802A-2015 R) FITTING ASSEMBLY@ ELBOW@ 90?@ MALE FLARELESS@ AXIALLY SWAGED@ HYDRAULIC@ 3000 PSI
• SAE AS627D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO STRAIGHT@ HEAVYWEIGHT
• SAE AS85421/9A-2008 FITTING ASSEMBLY@ CROSS@ REDUCER BEAM SEAL@ 3000/4000 PSI@ 4 FEMALE ENDS
• SAE AS5545-2010 NUT COUPLING@ FLARELESS@ EXTRA FINE THREAD@ 5080 PSI@
• SAE AS5259/2-2012 CRIMPING TOOL AND ACCESSORIES@ HYDRAULIC PUMPS@ 10 000 PSI MINIMUM
• SAE AS85421/11C-2008 FITTING@ UNION@ BEAM SEAL@ 3000/4000 PSI@ MALE ENDS
• SAE AS85421/11B-2006 FITTING, UNION, BEAM SEAL, 3000/4000 PSI, MALE ENDS
• SAE AS85421/11A-2002 Fitting@ Union@ Beam Seal@ 3000/4000 psi@ Male Ends
• SAE AS85421/11-2002 Fitting@ Union@ Beam Seal@ 3000/4000 psi@ Male Ends
• SAE AS5356-1999 Coupling@ Fuel Line@ Flexible@ 125 psi General Specification for
• SAE AS626B-2000 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 90 TO 90°, HEAVYWEIGHT
• SAE AS626A-1999 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 90 TO 90°, HEAVYWEIGHT
• SAE AS5000-2006 Fitting@ Plug-in Union@ Ring Locked@ 24° Cone@ Fluid Connection@ 5080 psi@ Specification for
• SAE AS5000B-2008 Fitting@ Plug-in Union@ Ring Locked@ 24° Cone@ Fluid Connection@ 5080 psi@ Specification for
• SAE AS6192-2011 FITTING ASSEMBLY@ ELBOW@ 90°@ AXIALLY SWAGED@ FEMALE FLARELESS@ HYDRAULIC@ UP TO 1500 PSI
• SAE AMS4942A-1976 TITANIUM TUBING@ SEAMLESS Annealed@ 40@000 psi (276 MPa) Yield Strength
• SAE AMS4941B-1977 TITANIUM TUBING@ WELDED Annealed@ 40@000 psi (276 MPa) Yield Strength
• SAE AMS4942B-1977 TITANIUM TUBING@ SEAMLESS Annealed@ 40@000 psi (276 MPa) Yield Strength
• SAE AMS4941A-1974 TITANIUM TUBING@ WELDED Annealed@ 40@000 psi (276 MPa) Yield Strength
• SAE AMS4900D-1972 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 55@000 psi (379 Mpa) Yield
• SAE AMS4942C-1984 Titanium Tubing@ Seamless Annealed@ 40@000 psi (275 MPa) Yield Strength
• SAE AMS4941C-1984 Titanium Tubing@ Welded Annealed@ 40@000 psi (276 MPa) Yield Strength
• SAE AMS4926B-1966 TITANIUM ALLOY BARS AND RINGS 5Al - 2.5Sn Annealed@ 110@000 psi Yield
• SAE AMS4926C-1969 Titanium Alloys Bars and Rings 5Al - 2.5Sn Annealed@ 110@000 psi Yield

American National Standards Institute （ANSI), PSI

• ANSI/SCTE 187-2-2012 Stereoscopic 3D PSI Signaling

U.S. Air Force, PSI

• AIR FORCE MIL-I-7086 C NOTICE 1-1996 INDICATOR, PRESSURE, OIL, 0-100 PSI
• AIR FORCE MIL-I-7086 C-1994 INDICATOR, PRESSURE, OIL, 0-100 PSI
• AIR FORCE MIL-I-7087 A NOTICE 1-1996 INDICATOR, PRESSURE, OIL, 0-200 PSI
• AIR FORCE MIL-I-7087 A (3)-1994 INDICATOR, PRESSURE, OIL, 0-200 PSI
• AIR FORCE MIL-I-7087 A-1968 INDICATOR, PRESSURE, OIL, 0-200 PSI
• AIR FORCE MIL-I-25950 B NOTICE 1-1996 INDICATOR, PRESSURE, OIL 0-100 PSI
• AIR FORCE MIL-I-25950 B (3)-1986 INDICATOR, PRESSURE, OIL 0-100 PSI
• AIR FORCE MIL-T-5796 D NOTICE 1-1996 TRANSMITTER, PRESSURE, OIL, 0-100 PSI
• AIR FORCE MIL-T-5796 D-1993 TRANSMITTER, PRESSURE, OIL, 0-100 PSI
• AIR FORCE MIL-I-25950 B-1967 INDICATOR, PRESSURE, OIL 0-100 PSI
• AIR FORCE MIL-I-7086 C VALID NOTICE 2-2008 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE MIL-I-7087A-1968 INDICATOR, PRESSURE, OIL, 0-200 PSI
• AIR FORCE MIL-I-25950 B VALID NOTICE 2-2008 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE MIL-I-7087 A VALID NOTICE 2-2008 Indicator, Pressure, Oil, 0-200 PSI
• AIR FORCE MIL-T-5796 D VALID NOTICE 2-2008 Transmitter, Pressure, Oil, 0-100 PSI
• AIR FORCE MIL-I-7084 A VALID NOTICE 2-2008 Indicator, Pressure, Hydraulic, 0-4,000 PSI
• AIR FORCE QPL-5796-17 NOTICE 1-2009 Transmitter, Pressure, Oil, 0-100 PSI
• AIR FORCE QPL-7088-20 NOTICE 1-2009 Indicator, Pressure, Oil, 0-1,000 PSI
• AIR FORCE QPL-7086-QPD-2010 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE QPL-5796-QPD-2011 Transmitter, Pressure, Oil, 0-100 PSI
• AIR FORCE QPL-7087-QPD-2011 Indicator, Pressure, Oil, 0-200 PSI
• AIR FORCE QPL-7084-QPD-2011 Indicator, Pressure, Hydraulic, 0-4,000 PSI
• AIR FORCE QPL-25950-QPD-2011 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE QPL-7086-QPD-2011 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE QPL-25950-26-2004 INDICATOR, PRESSURE, OIL, 0-100 PSI
• AIR FORCE QPL-7086-2011 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE QPL-7088-QPD-2012 Indicator, Pressure, Oil, 0-1,000 PSI
• AIR FORCE QPL-25950-2013 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE QPL-7086-2013 Indicator, Pressure, Oil 0-100 PSI
• AIR FORCE MIL-I-6301 B NOTICE 1-1996 INDICATOR, PRESSURE, FUEL, 0-600 PSI
• AIR FORCE MIL-I-6301 B-1994 INDICATOR, PRESSURE, FUEL, 0-600 PSI
• AIR FORCE MIL-I-7088 B NOTICE 1-1996 INDICATOR, PRESSURE, FUEL, 0-1000 PSI
• AIR FORCE MIL-I-7088 B-1993 INDICATOR, PRESSURE, FUEL, 0-1000 PSI
• AIR FORCE MIL-T-5396 C NOTICE 1-1996 TRANSMITTER, PRESSURE, FUEL, 0-1000 PSI
• AIR FORCE MIL-T-5396 C (1)-1994 TRANSMITTER, PRESSURE, FUEL, 0-1000 PSI
• AIR FORCE MIL-T-5396 C-1987 TRANSMITTER, PRESSURE, FUEL, 0-1000 PSI
• AIR FORCE QPL-5796-17-1996 TRANSMITTER, PRESSURE, OIL, 0-100 PSI
• AIR FORCE QPL-6301-20-1996 INDICATOR, PRESSURE, FUEL, 0-600 PSI
• AIR FORCE QPL-7086-27-1996 INDICATOR, PRESSURE, OIL, 0-100 PSI
• AIR FORCE QPL-7087-26-1996 INDICATOR, PRESSURE, OIL, 0-200 PSI
• AIR FORCE QPL-7088-20-1996 INDICATOR, PRESSURE, OIL, 0-1000 PSI
• AIR FORCE MIL-C-25014 (2)-1958 COUPLING, FLEXIBLE, FUEL LINE, 125 PSI
• AIR FORCE MIL-C-25014-1954 COUPLING, FLEXIBLE, FUEL LINE, 125 PSI
• AIR FORCE MIL-I-7084 A NOTICE 1-1997 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI
• AIR FORCE MIL-I-7084 A (1)-1984 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI
• AIR FORCE MIL-I-7084 A-1968 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI
• AIR FORCE MIL-I-6301 B VALID NOTICE 2-2008 Indicator, Pressure, Fuel, 0-600 PSI
• AIR FORCE MIL-I-7085 C VALID NOTICE 2-2008 Indicator, Pressure, Engine, 0-50 PSI
• AIR FORCE MIL-I-7088 B VALID NOTICE 2-2008 Indicator, Pressure, Fuel, 0-1,000 PSI
• AIR FORCE MIL-T-5396 C VALID NOTICE 2-2008 Transmitter, Pressure, Fuel, 0-1000 PSI
• AIR FORCE QPL-5882-16 NOTICE 1-2009 Transmitter, Pressure, Multipurpose, 0-50 PSI
• AIR FORCE QPL-6301-QPD-2010 Indicator, Pressure, Fuel, 0-600 PSI
• AIR FORCE QPL-7088-QPD-2011 Indicator, Pressure, Fuel, 0-1,000 PSI
• AIR FORCE QPL-6301-QPD-2011 INDICATOR, PRESSURE, FUEL, 0-600 PSI
• AIR FORCE QPL-6301-2012 Indicator, Pressure, Fuel, 0-600 PSI
• AIR FORCE QPL-6301-2013 Indicator, Pressure, Fuel, 0-600 PSI
• AIR FORCE MIL-I-7085 C NOTICE 1-1996 INDICATOR, PRESSURE, ENGINE, 0-50 PSI
• AIR FORCE MIL-I-7085 C-1994 INDICATOR, PRESSURE, ENGINE, 0-50 PSI
• AIR FORCE QPL-5882-16-1994 TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI
• AIR FORCE QPL-7084-17-2004 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI
• AIR FORCE QPL-7085-QPD-2012 Indicator, Pressure, Engine, 0-50 PSI
• AIR FORCE QPL-7085-QPD-2011 Indicator, Pressure, Engine, 0-50 PSI
• AIR FORCE QPL-7085-21-1996 INDICATOR, PRESSURE, ENGINE, 0-50 PSI
• AIR FORCE MIL-I-6514 B NOTICE 1-1996 INDICATOR, OIL PRESSURE, 0-200 PSI 320 DEGREE, TYPE B-9C
• AIR FORCE MIL-I-6514 B (1)-1994 INDICATOR, OIL PRESSURE, 0-200 PSI 320 DEGREE, TYPE B-9C
• AIR FORCE MIL-I-6514 B-1988 INDICATOR, OIL PRESSURE, 0-200 PSI 320 DEGREE, TYPE B-9C
• AIR FORCE MIL-T-5882 D ADMIN NOTICE 2-2005 TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1
• AIR FORCE MIL-T-5882 D-1989 TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1
• AIR FORCE QPL-25861-QPD-2011 Indicator, Pressure, Hydraulic, 0-4,000 PSI, Integrally Lighted
• AIR FORCE QPL-5882-QPD-2013 TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1
• AIR FORCE MIL-DTL-5882 E-2013 TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1
• AIR FORCE MIL-I-25861 D NOTICE 1-1997 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI, INTEGRALLY LIGHTED
• AIR FORCE MIL-I-25861 D (3)-1981 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI, INTEGRALLY LIGHTED
• AIR FORCE MIL-I-25861 D-1967 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI, INTEGRALLY LIGHTED
• AIR FORCE QPL-5882-QPD-2011 TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1
• AIR FORCE MIL-V-25513 F NOTICE 2-1999 VALVE, CHECK, FOR 300 PSI LIQUID OXYGEN CONVERTER SYSTEMS, TYPE MH-1
• AIR FORCE QPL-25861-22-2004 INDICATOR, PRESSURE, HYDRAULIC, 0-4,000 PSI INTEGRALLY LIGHTED
• AIR FORCE AN6293 REV 3 VALID NOTICE 5-2008 VALVE, 4-WAY ROTARY SELECTOR, 3,000 PSI, NON-INTERFLOW
• AIR FORCE MIL-I-25861 D VALID NOTICE 2-2008 Indicator, Pressure, Hydraulic, 0-4,000 PSI, Integrally Lighted

Defense Logistics Agency, PSI

• DLA AN6249 REV 2 VALID NOTICE 2-2005 VALVE, 3000 PSI HYDRAULIC CHECK
• DLA QPL-8788-22-2006 HOSE, RUBBER, HYDRAULIC, HIGH PRESSURE (3,000 PSI)
• DLA AN6207 REV 4 VALID NOTICE 2-2005 VALVE AND 1500 PSI HYDRAULIC CHECK
• DLA QPL-8790-8-2005 HOSE ASSEMBLIES, RUBBER, HYDRAULIC HIGH PRESSURE (3,000 PSI)
• DLA QPL-27190-12-2006 INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI
• DLA MS21000 REV A-2013 PIN ?FLATHEAD, HI ?SHEAR, OVERSIZE, 160,000 PSI
• DLA MIL-DTL-27190 C-2006 INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI
• DLA QPL-38394-10-2007 TRANSMITTER, PRESSURE TRU-81/A, OIL, 0-500 PSI
• DLA QPL-5498-QPD-2011 Accumulators, Hydraulic, Cylindrical 3000 PSI, Aircraft
• DLA QPL-38394-10 NOTICE 1-2008 TRANSMITTER, PRESSURE TRU-81/A, OIL, 0-500 PSI
• DLA QPL-27188-QPD-2010 Indicator, Pressure EGU-2/A, Oil, 0-100 PSI
• DLA MIL-DTL-27188 C VALID NOTICE 1-2011 Indicator, Pressure EGU-2/A, Oil, 0-100 PSI
• DLA QPL-27188-2012 Indicator, Pressure EGU-2/A, Oil, 0-100 PSI
• DLA AN6280 REV 2 VALID NOTICE 2-2005 VALVE, 3000 PSI HYDRAULIC CHECK INTERNAL PORTS
• DLA MIL-DTL-38394 E-2009 TRANSMITTER, PRESSURE TRU-81/A, OIL, 0-500 PSI
• DLA QPL-38394-QPD-2010 TRANSMITTER, PRESSURE TRU-81/A, OIL, 0-500 PSI
• DLA QPL-38394-QPD-2011 Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI
• DLA QPL-38394-2012 Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI
• DLA QPL-38394-2013 Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI
• DLA MIL-DTL-38394 E VALID NOTICE 1-2013 Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI
• DLA QPL-27190-QPD-2010 Indicator, Pressure AGU-3/A, Hydraulic, 0-4,000 PSI
• DLA QPL-27190-QPD-2011 Indicator, Pressure AGU-3/A, Hydraulic, 0-4,000 PSI
• DLA MIL-DTL-27190 C VALID NOTICE 1-2012 Indicator, Pressure AGU-3/A, Hydraulic, 0-4,000 PSI
• DLA QPL-27190-2012 Indicator, Pressure AGU-3/A, Hydraulic, 0-4,000 PSI
• DLA MIL-DTL-83361 B VALID NOTICE 1-2013 Indicator, Pressure, Oil, Dual, 0-100 PSI, EGU-18/A
• DLA MS27152 REV B NOTICE 3-2005 SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF
• DLA MS27152 REV B VALID NOTICE 1-1991 SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF
• DLA MS27152 REV B-1968 SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF
• DLA MS27152 REV C-2011 SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF
• DLA MS28761 REV C-2007 FITTING END, STRAIGHT, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3,000 PSI, FLARELESS TUBE
• DLA MS28762 REV D-2007 HOSE ASSEMBLY, RUBBER, HYDRAULIC 3000 PSI, STRAIGHT TO STRAIGHT, FLARELESS TUBE FIELD ATTACHABLE
• DLA MS28920 REV C-2007 HOSE ASSEMBLY, RUBBER, HYDRAULIC, (3,000 PSI), FITTING END TO ELBOW 45 DEG., FLARED TUBE
• DLA MS28921 REV C-2007 HOSE ASSEMBLY, RUBBER, HYDRAULIC 3,000 PSI, STRAIGHT TO ELBOW 90 DEGREE, FLARED TUBE
• DLA MS28924 REV C-2007 HOSE ASSEMBLY, RUBBER, HYDRAULIC, 3,000 PSI, ELBOW 90?TO ELBOW 90? FLARED TUBE
• DLA MS21000 NOTICE 1-1997 PIN - FLATHEAD, HI-SHEAR, OVERSIZE, 160,000 PSI
• DLA MS21000 REINST-1953 PIN - FLATHEAD, HI-SHEAR, OVERSIZE, 160,000 PSI
• DLA MS21001 VALID NOTICE 1-1994 PIN, 100 DEG. COUNTERSUNK HEAD, HI-SHEAR, OVERSIZE, 160,000 PSI
• DLA MS21001 REINST-1953 PIN, 100 DEG. COUNTERSUNK HEAD, HI-SHEAR, OVERSIZE, 160,000 PSI

Aerospace Industries Association/ANSI Aerospace Standards, PSI

• AIA/NAS NASM6812-2012 FASTENERS, EXTERNALLY THREADED, ALLOY STEEL, CORROSION RESISTANT STEEL, ALUMINUM, 60,000 PSI TO 125,000 PSI (Rev 3)
• AIA/NAS NASM6812-2016 FASTENERS, EXTERNALLY THREADED, ALLOY STEEL, CORROSION RESISTANT STEEL, ALUMINUM, 60,000 PSI TO 125,000 PSI (Rev 4)

AIA/NAS - Aerospace Industries Association of America Inc., PSI

• NASM6812-2012 FASTENERS@ EXTERNALLY THREADED@ ALLOY STEEL@ CORROSION RESISTANT STEEL@ ALUMINUM@ 60@000 PSI TO 125@000 PSI (Rev 3)
• NASM6812-2016 FASTENERS@ EXTERNALLY THREADED@ ALLOY STEEL@ CORROSION RESISTANT STEEL@ ALUMINUM@ 60@000 PSI TO 125@000 PSI (Rev 4)
• NASM6812-2006 Fasteners@ Externally Threaded Alloy Steel@ Corrosion Resistant Steel@ Aluminum 60@000 PSI to 125@000 PSI (Rev 2)
• NASM6812-2000 Fasteners@ Externally Threaded Alloy Steel@ Corrosion Resistant Steel@ Aluminum 60@000 PSI to 125@000 PSI (Rev 1)

Aerospace Industries Association, PSI

• AIA NAS 1790-1996 Bolt, 100 Degree Flush Head 160,000 PSI UTS Rev. 4
• AIA NASM6812-2000 Fasteners, Externally Threaded Alloy Steel, Corrosion Resistant Steel, Aluminum 60,000 PSI to 125,000 PSI Rev.1; FSC 53GP
• AIA NAS 428-1994 Bolt, Machine, 125,000 psi - Crowned Hexagon Head, Adjusting Rev. 8

未注明发布机构, PSI

• SAE AMS4901U-2019 TITANIUM SHEET AND STRIP Annealed - 70@000 psi Yield
• SAE AMS5517M-2018 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni Cold Rolled - 125,000 psi

U.S. Military Regulations and Norms, PSI

• ARMY MIL-C-52972 A NOTICE 1-1998 COMPRESSOR UNIT, 5 CFM, 3200 PSI, GASOLINE-ENGINE-DRIVEN, DIVING AIR
• ARMY MIL-C-52972 A-1987 COMPRESSOR UNIT, 5 CFM, 3200 PSI, GASOLINE-ENGINE-DRIVEN, DIVING AIR
• ARMY MIL-C-52973 A NOTICE 1-1998 COMPRESSOR UNIT, 20 CFM, 5000 PSI, DIESEL-ENGINE-DRIVEN DIVING AIR
• ARMY MIL-C-52973 A-1987 COMPRESSOR UNIT, 20 CFM, 5000 PSI, DIESEL-ENGINE-DRIVEN DIVING AIR

British Standards Institution (BSI), PSI

• BS ISO 8913:2007 Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400F/3000 psi (204C/20684 kPa) and 204C/21000 kPa (400F/3046 psi). Procurement specification

Others:   PSI, Yield psi, Nitrogen psi, scfm psi, psi compression, 1100 psi, 1240 psi, rubber psi, design psi, psi thread, psi test, psihydraulic, psi detection, +psi, psi nylon, thread psi, Strength psi, psi mpa, psi standard, psi requirements.