ZH
RU
ES
sheath gas effect
sheath gas effect, Total:500 items.
In the international standard classification, sheath gas effect involves: Optoelectronics. Laser equipment, Natural gas, Fluid power systems, Pipeline components and pipelines, Extraction and processing of petroleum and natural gas, Fuels, Protection against electric shock, Protective equipment, Domestic, commercial and industrial heating appliances, Equipment for petroleum and natural gas industries, Fluid storage devices, Air quality, Insulating materials, Wind turbine systems and other alternative sources of energy, Geology. Meteorology. Hydrology, Valves, Gas and steam turbines. Steam engines, Occupational safety. Industrial hygiene, Internal combustion engines for road vehicles, Shipbuilding and marine structures in general, Equipment for the chemical industry, Pumps, Elements of buildings, Waxes, bituminous materials and other petroleum products, Rotating machinery, Power transmission and distribution networks, Water quality, Agricultural machines, implements and equipment, Welding, brazing and soldering, Explosion protection, Insulating fluids, Farm buildings, structures and installations, Measurement of volume, mass, density, viscosity, Analytical chemistry, Diagnostic, maintenance and test equipment, Alarm and warning systems, Installations in buildings, Petroleum, petroleum products and natural gas handling equipment, Test conditions and procedures in general, Adhesives, Electrical accessories, Medical equipment, Road vehicles in general, Switchgear and controlgear, Ground service and maintenance equipment, Paints and varnishes, Rubber and plastics products, Equipment for railway/cableway construction and maintenance, Products of the chemical industry, Packaging materials and accessories, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Laundry appliances, Road vehicle systems, Sports equipment and facilities, Electrical engineering in general, Glass, Construction industry, Transformers. Reactors, Electricity. Magnetism. Electrical and magnetic measurements, Company organization and management, Linear and angular measurements, Particle size analysis. Sieving, Environmental testing, Plastics, Technical drawings, Applications of information technology, Industrial trucks, Physics. Chemistry, Metrology and measurement in general, Components for electrical equipment, Electrical equipment for working in special conditions, Iron and steel products, Electromechanical components for electronic and telecommunications equipment, Acoustics and acoustic measurements, Small craft, Construction materials, Road engineering, Kitchen equipment.
Association Francaise de Normalisation, sheath gas effect
- NF C97-036*NF EN 61920:2005 Infrared free air applications.
- NF EN ISO 11439:2013 Bouteilles à gaz - Bouteilles haute pression pour le stockage de gaz naturel utilisé comme carburant à bord des véhicules automobiles
- NF C18-406*NF EN 61235:1996 Live working. Insulating hollows tubes for electrical purposes.
- NF E29-733*NF EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- XP M88-771:2004 Manually operated valves for gas installations for buildings
- NF EN ISO 11439/A1:2021 Bouteilles à gaz - Bouteilles haute pression pour le stockage de gaz naturel utilisé comme carburant à bord des véhicules automobiles - Amendement 1
- NF C18-501*NF EN 50110-1:2013 Operation of electrical installations - Part 1 : general requirements
- NF EN 60984/A11:1997 Protège-bras en matériaux isolants pour travaux électriques
- NF EN 60984/A1:2003 Protège-bras en matériaux isolants pour travaux électriques
- NF EN 60984:1993 Protège-bras en matériaux isolants pour travaux électriques
- NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
- NF X43-257:2016 Qualité de l'air - Air des lieux de travail - Prélèvement d'aérosol à l'aide d'une cassette (orifice 4 mm)
- NF X43-286*NF EN ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers
- NF C42-130:1989 Direct acting recording electrical measuring instruments and their accessories.
- NF E29-733/A1*NF EN ISO 11439/A1:2021 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment1
- NF EN 481:1993 Atmosphères des lieux de travail - Définition des fractions de taille pour le mesurage des particules en suspension dans l'air
- NF EN ISO 6251:1998 Gaz de pétrole liquéfiés - Action corrosive sur le cuivre - Essai à la lame de cuivre.
- NF X20-513-1*NF EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1 : designation of the quality
- NF P45-200*NF EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
- NF EN ISO 15403-1:2008 Gaz naturel - Gaz naturel pour usage comme carburant comprimé pour véhicules - Partie 1 : désignation de la qualité
- NF EN ISO 23320:2022 Air des lieux de travail - Gazes et vapeurs - Exigences pour l'évaluation des procédures pour le mesurage à l'aide de dispositifs de prélèvement par diffusion
- NF EN ISO 22065:2020 Air des lieux de travail - Gaz et vapeurs - Exigences pour l'évaluation des procédures de mesure à l'aide de dispositifs de prélèvement par pompage
- NF M88-760-1*NF EN 16652-1:2016 LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1 : working areas and procedures
- NF C18-407*NF EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations.
- NF EN IEC 62990-2:2021 Atmosphères des lieux de travail - Partie 2 : détecteurs de gaz - Sélection, installation, utilisation et maintenance des détecteurs de gaz et de vapeurs toxiques
- NF E29-135:2011 Shut-off gas valves, low pressure - Manually operated ball valves and closed bottom taper plug valves for gas installations for building - Maximum working pressure below or equal to 0,5 bar
- NF D28-351:1979 Heating equipment using gas for domestic washing machines. Requirements for construction and operation.
- NF M41-026*NF EN ISO 23590:2021 Household biogas system requirements : design, installation, operation, maintenance and safety
- NF M87-207*NF EN ISO 11960:2015 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
- NF EN 50508:2009 Perches isolantes à usage multiple pour les opérations électriques sur les installations haute tension
- FD CR 13259-1999 Gas welding equipment. Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes.
- NF X43-258:1991 Air quality. Workplace air. Sampling and analysis of gaseous organic pollutants on silicon gel. Sampling by pumping.
- NF E29-141:2011 Shut-off gas valves, medium pressure - Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings - 5 bar maximum working pressure
- NF E29-135:2020 Robinetterie de gaz, basse pression - Robinets à tournant sphérique et robinets à tournant conique à fond plat destinés à être manoeuvrés manuellement pour les installations de gaz des bâtiments - Pression maximale de service inférieure ou é...
- NF X43-286:1997 Workplace atmospheres. Pumped sorbent tubes for the determination of gases and vapours. Requirements and test methods.
- NF EN 521+AC:2019 Spécifications pour les appareils fonctionnant exclusivement aux gaz de pétrole liquéfiés - Appareils portatifs alimentés à la pression de vapeur des gaz de pétrole liquéfiés
- NF EN ISO 11960:2015 Industries du pétrole et du gaz naturel - Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits
- NF EN 732:1999 Spécifications pour les appareils fonctionnant exclusivement aux gaz de pétrole liquéfiés - Réfrigérateurs à absorption.
- NF EN ISO 13085:2014 Industries du pétrole et du gaz naturel - Tubes en alliage d'aluminium utilisés comme tubes de production dans les puits
- NF X43-286:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods.
- NF X43-288:2003 Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents.
- NF A84-533:1999 Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes
- NF EN 45544-4:2016 Atmosphères des lieux de travail - Appareillage électrique utilisé pour la détection directe des vapeurs et gaz toxiques et le mesurage direct de leur concentration - Partie 4 : guide de sélection, d'installation, d'utilisation et d'entretien
- NF C52-195*NF EN 50195:1997 Code of practive for the safe use of fully enclosed askarel-filled electrical equipment.
- NF EN ISO 13734:2013 Gaz naturel - Composés organiques utilisés comme odorisants - Prescriptions et méthodes d'essai
- NF ISO 11901-3:2021 Outillage de presse - Ressorts à gaz - Partie 3 : ressorts à gaz à force accrue à faible encombrement en hauteur
- NF C23-300-2*NF EN IEC 62990-2:2021 Workplace atmospheres - Part 2 : gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours
- NF X43-262:2012 Qualité de l'air - Air des lieux de travail - Prélèvement d'aérosols solides à l'aide d'une coupelle rotative (fractions alvéolaire, thoracique et inhalable)
- NF U26-110-2:2003 Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 2 : air-assisted sprayers for bush and tree crops.
- NF H96-334:2013 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust
- NF E29-693/A1*NF EN ISO 12209/A1:2017 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1 : outlet connection up to a maximum cylinder working pressure of 500 bar
- NF X43-246-3*NF EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3 : performance requirements for apparatus used for general gas detection
- NF C74-384:1986 Electromedical equipment. Respiration monitoring equipment. Particular requirements for safety and operating.
- NF C74-387:1987 Electromedical equipment. Temperature monitoring equipment. Particular requirements for safety and operating.
International Electrotechnical Commission (IEC), sheath gas effect
- IEC 61920:2004 Infrared free air applications
- IEC 61920:1998 Infrared transmission systems - Free air applications
- IEC 60628:1985/COR1:1986 Gassing of insulating liquids under electrical stress and ionization; Corrigendum 1
- IEC 60628:1985 Gassing of insulating liquids under electrical stress and ionization
- IEC 60601-2-13:1998 Medical electrical equipment - Part 2-13: Particular requirements for the safety of anaesthetic workstations
- IEC 62990-2:2021 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours
International Organization for Standardization (ISO), sheath gas effect
- ISO/TR 16922:2013 Natural gas.Odorization
- ISO 25760:2009 Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders
- ISO 9492:1987 Bases for design of structures; Temperature climatic actions
- ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers
- ISO 11439:2013/Amd 1:2021 Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles — Amendment 1
- ISO 19078:2006 Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- ISO 3231:1993 Paints and varnishes; determination of resistance to humid atmospheres containing sulfur dioxide
- ISO 19078:2013 Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- ISO/TR 15403-2:2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 2: Specification of the quality
- ISO 16200-1:2001 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method
- ISO 23320:2022 Workplace air — Gases and vapours — Requirements for evaluation of measuring procedures using diffusive samplers
- ISO/AWI TR 26762 Design & operation of allocation systems used in gas productions facilities
- ISO/WD 13734 Natural gas — Organic components used as odorants — Requirements and test methods
- ISO 12209:2013/Amd 1:2016 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar
- ISO/TS 15827:2007 Road vehicles - Test procedures - Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
- ISO 22065:2019 Workplace air — Gases and vapours — Requirements for evaluation of measuring procedures using pumped samplers
- ISO 20581:2016 Workplace air - General requirements for the performance of procedures for the measurement of chemical agents
- ISO/CD TR 26762:2023 Design & operation of allocation systems used in gas productions facilities
- ISO/TS 12025:2012 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
- ISO/TS 12025:2021 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
PL-PKN, sheath gas effect
- PN B02013-1987 Actions on building structures Variable environmental actions Atmospheric icing action
- PN Z70000-02-1988 Medical electrical e?uipment ated operation conditions
- PN E04431 ArkusZ01-1974 Electric insulating materials Methods of testing for the resi- stance to the action of chemical agresive atmospheres Test for the resistance to the action of the humide atmosphere containing ammoniac
- PN E04431 ArkusZ02-1974 Electric insulating materials Methods of testing for the resi- stance to the action of chemical agresive atmospheres Test for the resistance to the action of the humide atmosphere containing sulphur dioxide
- PN-EN ISO 23306-2021-05 E Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020)
- PN E77207-1969 Electric motoropera?ed appliances lor domestic and ?imilar purposes Hand-dryers Requlremen?? and tests
- PN Z04227-02-1992 Air purity protection ests for kerosene content etermination of kerosene vapours n work places by gas chromatography
- PN Z04045-09-1992 Air purity protection ests for content of aldehydes etermination of furfuraldehyde n work places by gas chromatography
- PN Z04182-12-1988 Air purity protection Tests for pesticides Determination of diazinon in work places by gas chromatography
- PN Z04182-17-1990 Air purity protection Tests for pesticides Determination of dichlorvos in work places by gas chromatography
- PN Z04182-18-1992 Air purity protection Tests for pesticides Determination of fenthion in work places by gas chromatography
- PN Z04182-11-1987 Air purity protection Tests tor pesticides Determination of fenilrothion in work places by gas chromatography
- PN Z04182-19-1992 Air purity protection Tests for pesticides Determiriation of deltamethrin in work places by gas chromatography
- PN Z04215-02-1991 Air purity protection Tests for chloroacetic acid Determination of chloroacetic acid in work places by gas chromatography
- PN D04251-1988 Plywood Determination of linear diamensions changes after conditioning humid air
- PN-EN ISO 22065-2021-05 E Workplace air -- Gases and vapours -- Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
- PN Z04078-02-1991 Air purity protection Tests for a-chloroacetophenone Determination of a-chloroacetophenone in work places by gas chromatography
- PN Z04213-02-1989 Air purity protection Tests for nitroglycerin Determination of nitroglycerin in work places by gas chromatography
AT-ON, sheath gas effect
- ONORM M 7427-1989 Thermally operated flue gas dampers for gas appliances
- ONORM M 7428-1989 Mechanically operated flue gas dampers for gas appliances
- ONORM EN 481-1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
- OENORM EN ISO 11439/A1:2020 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013/DAM 1:2020)
- OENORM EN ISO 23306:2021 Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020)
- ONORM M 7355-1981 Small pressure vessels for compressed air; upto 10 bar operating pressure
- OENORM EN ISO 23590:2021 Household biogas system requirements: design, installation, operation, maintenance and safety (ISO 23590:2020)
- OENORM EN ISO 11960:2021 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
CZ-CSN, sheath gas effect
- CSN 10 9102-1987 Unified system of industrial pneumatic components. Single and double acting cylinders. Testing methods
- CSN 10 9101-1984 Unified system of industrial pneumatic components. Single and double acting cylinders. Technical requirements
- CSN 18 5608-1981 Electropneumatic and pneumoelectric transmitters for automation
- CSN IEC 484:1994 Indirect acting electrical measuring instruments
- CSN EN 481-1994 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
- CSN 25 7869-1967 Wet gas meters for working pressure up to 120 kp/m2 for laboratory use
- CSN 18 5307-1985 Pneumatic diaphragm conlrol aetuators for automation. Classi-ficalion, basic paramelers and tuchnical rcquirements
Professional Standard - Petroleum, sheath gas effect
- SY/T 6698-2007 Recommended practice for coiled tubing operations in oil and gas well services
- SY 6698-2007 Recommended Practices for Coiled Tubing Operations in Oil and Gas Wells
- SY/T 6731-2014 Petroleum and natural gas industries.Snubbing units for oilfield
- SY 6731-2014 Oil and gas industry oil and gas field with pressure working machine
- SY/T 5184-1997 Quartz sand for sand control in oil,gas wells and water injection wells
- SY/T 6644-2006 Recommended practice for design of continuous flow gas lift installations using injection pressure operated valves
- SY/T 6085-2012 Screw foam generator for oil and gas field
- SY/T 6470-2011 Regulation for operation maintenance repair of general purpose valve in oil and gas pipeline
- SY 6470-2011 Operation, maintenance and repair procedures for general valves in oil and gas pipelines
- SY/T 6470-2000 Code for operation maintenance repair of general purpose valve in oil and gas pipeline
- SY/T 5891.1-1999 Specification of making concrete targets for well perforators test
- SY/T 6446-2000 Specifications for making quality control targets for testing shaped charges of well
- SY/T 6666-2006 Recommended practice on application, care, and use of wire rope for petroleum & natural gas industry service
- SY/T 6666-2012 Recommended practice on application care, and use of wire rope for petroleum & natural gas industry service
- SY/T 6666-2017 Recommended practice for selection and maintenance of steel wire ropes for the oil and gas industry
AR-IRAM, sheath gas effect
RO-ASRO, sheath gas effect
American Society for Testing and Materials (ASTM), sheath gas effect
- ASTM D1946-90(2006) Standard Practice for Analysis of Reformed Gas by Gas Chromatography
- ASTM E1370-96(2002) Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
- ASTM D3283-98 Standard Specification for Air as an Electrical Insulating Material
- ASTM D3283-98(2004) Standard Specification for Air as an Electrical Insulating Material
- ASTM D1946-90(2015)e1 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
- ASTM D4597-10(2021) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM D4597-10 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM E1370-96(2008) Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
- ASTM E1370-14 Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
- ASTM D6060-96 Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
- ASTM C1143-89(1994)e1 Standard Specification for Helium for Use as a Cover Gas for Liquid Sodium (Withdrawn 2000)
- ASTM D4490-23 Red Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors (Standard + Redline PDF Bundle)
- ASTM D4490-96(2001)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
- ASTM D4490-23 Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
- ASTM D4490-96(2016) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
- ASTM D4490-96(2011) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
- ASTM D8487-23 Standard Specification for Natural Gas, Hydrogen Blends for Use as a Motor Vehicle Fuel
- ASTM F1397-93(2005) Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
- ASTM D3283-98(2012) Standard Specification for Air as an Electrical Insulating Material
- ASTM D6054-97 Standard Practice for Conditioning Electrical Insulating Materials for Testing
- ASTM D6054-97(2004) Standard Practice for Conditioning Electrical Insulating Materials for Testing
- ASTM F2391-22 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
- ASTM F2993 Standard Guide for Monitoring Weather Conditions for Safe Parasail Operation
- ASTM F2993-13 Standard Guide for Monitoring Weather Conditions for Safe Parasail Operation
- ASTM D4597-03 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM D4597-03(2009)e1 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM D4597-10(2015) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM D3249-95(2011) Standard Practice for General Ambient Air Analyzer Procedures
- ASTM E1370-21 Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
- ASTM D4597-97 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
- ASTM D4185-06(2011) Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
- ASTM D750-68 Recommended Practice for Operating Light - And Weather-Exposure Apparatus (Carbon-Arc Type) For Artificial Weather Testing Of Rubber Compounds
- ASTM D4418-00(2006) Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
- ASTM D4418-88(1998) Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
- ASTM D4418-00 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
- ASTM E697-96(2011) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
- ASTM F1762-14 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch
- ASTM D5404/D5404M-11 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
- ASTM D5404/D5404M-12 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
American Petroleum Institute (API), sheath gas effect
- API RP 5C7-1996(2007) Recommended Practice for Coiled Tubing Operations in Oil and Gas Well Services
- API RP 5L2-2002(2015) Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service
- API RP 51R-2009(2015) Environmental Protection for Onshore Oil and Gas Production Operations and Leases
- API RP 76-2007(2013) Contractor Safety Management for Oil and Gas Drilling and Production Operations
HU-MSZT, sheath gas effect
Standard Association of Australia （SAA）, sheath gas effect
- AS 2225:1994 Insulating gloves for electrical purposes
- AS ISO 10651.4:2004 Lung ventilators for medical use - Particular requirements for operator-powered resuscitators
- AS 2986.1:2003 Workplace air quality - Sampling and anlysis of volatile organic compounds by solvent desorption/gas chromatography - Pumped sampling method
- AS 2986.2:2003 Workplace air quality - Sampling and anlysis of volatile organic compounds by solvent desorption/gas chromatography - Diffusive sampling method
- AS/NZS 4761.1:2008 Competencies for working with electrical equipment for hazardous areas (EEHA) - Competency Standards
German Institute for Standardization, sheath gas effect
- DIN EN 509/A2:2005 Decorative fuel-effect gas appliances; German version EN 509:1999/A2:2004
- DIN EN 61920:2004 Infrared free air applications (IEC 61920:2004); German version EN 61920:2004
- DIN EN 1991-1-9:2023-03 Eurocode 1: Actions on structures - Part 1-9: General actions - Atmospheric icing; German and English version prEN 1991-1-9:2023 / Note: Date of issue 2023-02-17
- DIN EN 1991-1-9:2023 Eurocode 1: Actions on structures - Part 1-9: General actions - Atmospheric icing; German and English version prEN 1991-1-9:2023
- DIN IEC 60628:1995 Gassing of insulating liquids under electrical stress and ionization (IEC 60628:1985); German version HD 488 S1:1987
- DIN EN ISO 15403:2007 Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles (ISO 15403:2000); German version EN ISO 15403:2005
- DIN EN ISO 23320:2022-08 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022); German version EN ISO 23320:2022
- DIN EN ISO 22065:2021-02 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020); German version EN ISO 22065:2020
- DIN EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007
- DIN EN ISO 15403-1:2009-10 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006); German version EN ISO 15403-1:2008
- DIN EN ISO 11439:2022-03 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013 + Amd 1:2021); German version EN ISO 11439:2013 + A1:2021
- DIN 50011-12:1987 Artificial climates in technical applications; air temperature as a climatological quantity in controlled-atmosphere test installations
- DIN EN ISO 13085:2014-06 Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014); English version EN ISO 13085:2014
- DIN EN ISO 23306:2021 Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020); German and English version EN ISO 23306:2020
- DIN EN 61235:1997-07 Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified); German version EN 61235:1995
- DIN 53489:1968 Testing of Electrical Insulating Materials; Asessing the Effect of Electrolytic Corrosion
- DIN 51935:1993 Testing of carbon materials; determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas; solid matters
- DIN EN 14042:2003 Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents; German version EN 14042:2003
- DIN EN ISO 11960:2021-08 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020); English version EN ISO 11960:2021, only on CD-ROM / Note: CD-ROM
- DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
- DIN EN ISO 13734:2014-03 Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013); German version EN ISO 13734:2013
- DIN 66136-1:2017 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles
- DIN 66136-1:2004 Determination of the dispersion degree of metals using gas chemisorption - Part 1: Principles
- DIN EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020); German version EN ISO 22065:2020
- DIN EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance; German version EN 45544-4:1999
- DIN EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection; German version EN 45544-3:2015
- DIN 4799:1990 Heating, ventilation and air-conditioning; testing of air distributions systems serving operating theatres
- DIN EN 50085-2-4:2010 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts; German version EN 50085-2-4:2009
- DIN 6275:1982 Internal combustion engines for general purposes; Compressed air containers for permissible working overpressures up to 30 bar
- DIN EN 50195:1997-03 Code of practice for the safe use of fully enclosed askarel-filled electrical equipment; German version EN 50195:1996
- DIN 6275:1982-04 Internal combustion engines for general purposes; Compressed air containers for permissible working overpressures up to 30 bar
RU-GOST R, sheath gas effect
- GOST R 54961-2012 Gas distribution systems. Consumers gas networks. General requirements to operation. Operational documentation
- GOST R 54982-2012 Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation
- GOST R 54983-2012 Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
- GOST R 54982-2022 Gas distribution systems. Objects of liquid petroleum gases. General requirements for operation. Operational documentation
- GOST 13861-1989 Regulators for gasflame working. General specifications
- GOST ISO 11439-2014 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
- GOST R ISO 11439-2010 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel. Specifications
- GOST 28786-1990 Wooden doors. Method for determination of environmental resistance
- GOST 32184-2013 Asphaltic materials. Determination for effect of heat and air
- GOST 32358-2013 Oil and gas wells. Geophysical researches and works in wells. General requirements
- GOST 6359-1975 Meteorological barographs of aneroid type. Specifications
- GOST R 56217-2014 Automotive vehicles using gas as a motor fuel. General technical requirements for the operation of liquefied natural gas, safety testing methods
- GOST 33752-2017 Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
- GOST 13320-1981 Automatic instruments of contnuous action used for gas analysis. General requirements
- GOST R 57433-2017 Using of natural gas as a motor fuel. Terms and definitions
- GOST R 51753-2001 High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
- GOST 27154-1986 Jet fuels. Method of test for water reaction
- GOST 30779-2001 Insulating glass units for building. Method of determination of resistance to atmospheric effects and estimation of life circle
- GOST R 56400-2015 Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements
- GOST 33986-2016 Automotive vehicles. High-pressure cylinders for compressed natural gas used as motor fuel. Technical requirements and test methods
- GOST IEC 60628-2014 Insulating liquids. Determination of gassing under electrical stress and ionization
- GOST R IEC 60628-2013 Insulating liquids. Determination of gassing under electrical stress and ionization
- GOST 8711-1993 Direct acting indicating analogue electrical measuring inctruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
- GOST 9.708-1983 Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
- GOST 8711-1978 Ammeters and voltmeters. General technical specifications
- GOST 25852-1983 Electric contacts from noble metals and their alloys. Specifications
Korean Agency for Technology and Standards (KATS), sheath gas effect
- KS G 5162-1995 Manually operater gas valves for gas appliances
- KS B ISO 11439-2015(2020) Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- KS C IEC 61235-2016(2021) Live working－Insulating hollow tubes for electrical purposes
- KS C IEC 61235:2016 Live working－Insulating hollow tubes for electrical purposes
- KS I ISO 15403:2008 Natural gas－Designation of the quality of natural gas for use as a compressed fuel for vehicles
- KS I ISO 13641:2014 Water quality — Determination of inhibition of gas production of anaerobic bacteria
- KS I ISO 15403-2-2010(2021) Natural gas－Natural gas for use as a compressed fuel for vehicles－Part 2：Specification of the quality
- KS I ISO 15403-1-2010(2021) Natural gas－Natural gas for use as a compressed fuel for vehicles－Part 1：Designation of the quality
- KS B ISO 13085-2017(2022) Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells
- KS B ISO 13085:2017 Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells
- KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
- KS I ISO 15403-2:2010 Natural gas-Natural gas for use as a compressed fuel for vehicles-Part 2:Specification of the quality
- KS I ISO 16200-1:2008 Workplace air quality－Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography－Part 1：Pumped sampling method
- KS I ISO 17737:2019 Workplace atmoshperes — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
- KS C IEC 60648-2014(2019) Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
European Committee for Standardization (CEN), sheath gas effect
- EN ISO 25760:2015 Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)
- EN 1106:2001 Manually Operated Taps for Gas Burning Appliances
- prEN 481-1992 Workplace atmospheres; size fraction definitions for measurement of airbone particles
- EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
- EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
- EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
- prEN 521-1991 Dedicated liquefied petroleum gas appliances; portable appliances operating at vapeur pressure from liquefied petroleum gas containers
- EN 15001-2:2008 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning
- EN 15001-2:2023 Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning
- EN ISO 3231:1997 Paints and Varnishes - Determination of Resistance to Humid Atmospheres Containing Sulfur Dioxide
- prEN 50107-1992 Signs and luminous-discharge-tube installations operating from a no-load output voltage exceeding 1000 V
- HD 331 S1-1977 Standard directions of movement for actuators which control the operation of electrical apparatus
- EN ISO 23320:2022 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
- EN ISO 13734:2013 Natural gas - Organic components used as odorants - Requirements and test methods
- prEN 1991-1-9 Eurocode 1 - Actions on structures - Part 1-9: Atmospheric icing
- EN ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
- EN 14042:2003 Workplace atmospheres Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents
- EN 838:1995 Workplace Atmospheres - Diffusive Samplers for the Determination of Gases and Vapours - Requirements and Test Methods
- prEN 838-1992 Workplace atmospheres; diffusive samplers for the determination of gases and vapours; requirements and test methods
- PD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
- prEN ISO 23590:2021 Household biogas system requirements: design, installation, operation, maintenance and safety (ISO 23590:2020)
Defense Logistics Agency, sheath gas effect
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, sheath gas effect
- GB/T 4752-2016 Operation rules for construction of household anaerobic digesters
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, sheath gas effect
- GB/T 4752-2002 The operation rules for construction of household anerobie digesters
- GB/T 7637-1987 Operation rules of construction and installation of biogas pipelines for peasant household
- GB 7637-1987 Rural Household Biogas Pipeline Construction and Installation Operation Rules
- GB/T 11142-1989 Insulating oils--Determination of gassing under electrical stress and ionization
- GB 11142-1989 Insulating oils--Determination of gassing under electrical stress and ionization
- GB 12358-2006 Gas monitors and alarms for workplace.General technical requirements
- GB/T 26852-2011 Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems
- GB/T 42878-2023 Airspace Application and Use Requirements for Weather Modification Ground Operations
- GB/T 2550-2016 Extensible Business Reporting Language(XBRL) specification.Part 3:Formula
- GB/T 2550-2007 Gas welding equipment.Rubber hose for welding,cutting and allied processes
- GB 9706.23-2005 Medical electrical equipment-Part 2-43:Particular requirements for the safety of X-ray equipment for interventional procedures
- GB/T 10065-1988 Gassing of insulating liquids under electrical stress and ionization
- GB/T 10065-2007 Gassing of insulating liquids under electrical stress and ionization
British Standards Institution (BSI), sheath gas effect
- BS EN 61920:2004 Infrared free air applications
- BS EN ISO 11439:2013+A1:2021 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- BS EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations
- BS EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Designation of the quality
- BS EN ISO 22065:2020 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using pumped samplers
- BS EN 16652-1:2016 LPG equipment and accessories. Automotive LPG vehicles workshops. Working areas and procedures
- BS EN ISO 23320:2022 Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
- 20/30391806 DC BS EN ISO 11439 AMD1. Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- BS EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Guide for selection, installation, use and maintenance
- BS EN 15001-2:2008 Gas infrastructure - Gas installation pipework with an operating
pressure greater than 0,5 bar for industrial installations and
greater than 5 bar for industrial and non-industrial installations -
Part 2: Detailed functional requirements for commission
- BS ISO 19078:2013 Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- BS EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
- 21/30410828 DC BS ENISO 23320. Workplace air. Gases and vapours. Requirements for evaluation of measuring procedures using diffusive samplers
- 23/30457255 DC BS EN 1991-1-9. Eurocode 1. Actions on structures - Part 1-9. General actions. Atmospheric icing
- BS EN 1076:1997 Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods
- BS EN 1076:2010 Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods
- BS EN 14042:2003 Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents
- BS EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - General requirements and test methods
- BS EN 45544-2:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Performance requirements for apparatus used for measuring concentrations in the region of limit values
- BS DD IEC/PAS 62515:2011 Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems
- BS 4862 Pt.1:1983 Mounting dimensions of single rod double acting 10 bar pneumatic cylinders. Specification for cylinders up to 25 mm bore
- BS EN 1755:2000+A2:2013 Safety of industrial trucks. Operation in potentially explosive atmospheres. Use in flammable gas, vapour, mist and dust
- BS 6069-3.1:1990 Characterization of air quality - Workplace atmospheres - Method for the determination of vinyl chloride using a charcoal tube and a gas chromatograph
- BS 6069-3.1:1989 Characterization of air quality - Workplace atmospheres - Method for the determination of vinyl chloride using a charcoal tube and a gas chromatograph
- BS EN 45544-3:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Performance requirements for apparatus used for measuring concentrations well above limit values
- BS EN ISO 14509-2:2006 Small craft - Airborne sound emitted by powered recreational craft - Sound assessment using reference craft
- BS EN 203-2-9:2005 Gas heated catering equipment - Specific requirements - Solid tops, warming plates and griddles
- 20/30386430 DC BS ISO 23590. Household biogas system requirements: design, installation, operation, maintenance and safety
- BS EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling
Professional Standard - Meteorology, sheath gas effect
- QX/T 165-2012 Specifications for safety operation of 37 mm anti-aircraft gun used for weather modification activities
- QX/T 18-2003 Technical checkout specifications for 37 mm antiaircraft gun used for weather modification operation
- QX/T 659-2023 Airspace Application and Use Requirements for Weather Modification Aircraft Operations
American Society of Mechanical Engineers (ASME), sheath gas effect
- ASME STP-TS-012-2008 Thermophysical Properties of Working Gases Used in Gas Turbine Applications
- ASME STP-TS-012-2011 Thermophysical Properties of Working Gases Used in Gas Turbine Applications
- ASME STP-TS-012-1-2012 Thermophysical Properties of Working Gases Used In Working Gas Turbine Applications (STP-TS-012-1 - 2012)
- ASME B16.44-2012(R2017) Manually Operated Metallic Gas Valves for Use in Above Ground Piping Systems up to 5 psi
Jiangxi Provincial Standard of the People's Republic of China, sheath gas effect
- DB36/T 338-1999 Operating procedures for the installation of gas pipelines for rural household biogas digesters
- DB36/T 255-1997 Cotton application biogas fertilizer operating technical regulations
AENOR, sheath gas effect
- UNE-EN 61235:1996 LIVE WORKING. INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES.
- UNE-EN 50508:2011 Multi-purpose insulating sticks for electrical operations on high voltage installations
- UNE-EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013)
- UNE 204006:2017 Use of insulated gloves for maneuvers on high voltage electrical installations.
- UNE 21628:1995 GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION.
- UNE 60716:2006 Gaseous fuels. Undulated metallic flexible hoses for LPG in gas state to be used for domestic purposes at a maximum operating pressure (MOP) up to an including 20 bar
- UNE-EN 50195:1997 CODE OF PRACTICE FOR THE SAFE USE OF FULLY ENCLOSED ASKAREL-FILLED ELECTRICAL EQUIPMENT.
- UNE-EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
Danish Standards Foundation, sheath gas effect
- DS/IEC 1235/Corr.:1998 Live working - Insulating hollow tubes for electrical purposes
- DS/EN 61235:1995 Live working - Insulating hollow tubes for electrical purposes
- DS/EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- DS/ISO 23306:2020 Specification of liquefied natural gas as a fuel for marine applications
- DS/EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations
- DS/EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
- DS/IEC 628:1986 Gassing of insulating liquids under electrical stress and ionization
- DS/EN ISO 23306:2020 Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020)
- DS/HD 488 S1:1999 Gassing of insulating liquids under electrical stress and ionization
- DS/ISO 9898:2000 Equipment for crop protection - Test methods for air-assisted sprayers for bush and tree crops
- DS/EN IEC 62990-2:2021 Workplace atmospheres – Part 2: Gas detectors – Selection, installation, use and maintenance of detectors for toxic gases and vapours
- DS/EN ISO 11960:2011 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
- DS/ISO 22065:2020 Workplace air – Gases and vapours – Requirements for evaluation of measuring procedures using pumped samplers
- DS/EN 50195:1998 Code of practice for the safe use of fully enclosed askarel-filled electrical equipment
- DS/EN ISO 11960:2021 Petroleum and natural gas industries – Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
- DS/EN ISO 13734:2000 Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods
- DS/IEC/PAS 62515:2008 Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems
Sichuan Provincial Standard of the People's Republic of China, sheath gas effect
- DB51/T 1706-2013 Agricultural Weather Forecast Production Technical Regulations
- DB51/T 2206-2016 Rural household biogas digester safety operation management regulations
KR-KS, sheath gas effect
- KS C IEC 61235-2016 Live working－Insulating hollow tubes for electrical purposes
- KS I ISO 15403-2008 Natural gas－Designation of the quality of natural gas for use as a compressed fuel for vehicles
- KS B ISO 13085-2017 Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells
- KS I ISO 17737-2019 Workplace atmoshperes — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
ES-UNE, sheath gas effect
- UNE-EN 61235:1997 ERRATUM LIVE WORKING. INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES.
- UNE-EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
- UNE-EN ISO 23320:2023 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
- UNE-EN ISO 11439:2013/A1:2022 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
- UNE-EN ISO 13085:2014 Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014) (Endorsed by AENOR in May of 2014.)
- UNE-EN IEC 62990-2:2022 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours.
- UNE-EN ISO 11960:2021 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020) (Endorsed by Asociación Española de Normalización in June of 2021.)
- UNE 204006:2020 Use of insulated gloves for maneuvers on high voltage electrical installations.
- UNE-EN ISO 12209:2014/A1:2017 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar (ISO 12209:2013/Amd 1:2016, Corrected version 2017-03)
- UNE-EN 45544-4:2016 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance (Endorsed by AENOR in June of 2016.)
- UNE-EN 45544-2:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement (Endorsed by AENOR in March of 2015.)
- ESPECIFICACION UNE 0063:2021 Labels (QR, NFC,RFID... codes) on protective equipment for operation in electrical installations.
Inner Mongolia Provincial Standard of the People's Republic of China, sheath gas effect
Henan Provincial Standard of the People's Republic of China, sheath gas effect
- DB41/T 1501-2017 Operational assessment specification for 37 mm anti-aircraft guns used in weather modification operations
Taiwan Provincial Standard of the People's Republic of China, sheath gas effect
- CNS 12862-1991 Handling and use for coupling of liquefied petroleum gas
Professional Standard - Aquaculture, sheath gas effect
Professional Standard - Chemical Industry, sheath gas effect
- HG/T 2262-2006 Single stage double action cantilever liquid-ring pump for chlorine gas
- HG 2262-1992 Technical conditions of single-stage cantilever double-acting liquid ring chlorine pump
- HG 2263-1992 Single-stage cantilever double-acting liquid ring chlorine pump type and basic parameters
- HG/T 2101-1991 Test and parameter measurement method of single-stage cantilever double-acting liquid ring chlorine pump
Canadian Standards Association (CSA), sheath gas effect
US-HI, sheath gas effect
- HI 10.1-10.5-2010 Air - Operated Pumps for Nomenclature, Definitions, Application, and Operation
GOSTR, sheath gas effect
- GOST 28786-2019 Wooden and composite doors. Determination of properties in different climatic conditions
- GOST 34495-2018 Tractors and agricultural machines using natural gas as a motor fuel. Safety requirements for the operation of tractors and agricultural machines using liquefied natural gas
American National Standards Institute （ANSI), sheath gas effect
Gansu Provincial Standard of the People's Republic of China, sheath gas effect
- DB62/T 476-1996 Rural Household Biogas Digester Construction Operation Regulations
IN-BIS, sheath gas effect
PT-IPQ, sheath gas effect
Lithuanian Standards Office , sheath gas effect
- LST EN 50110-1-2013 Operation of electrical installations -- Part 1: General requirements
- LST EN 50508-2009 Multi-purpose insulating sticks for electrical operations on high voltage installations
- LST EN ISO 11439:2002 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000)
- LST EN 481-2001 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
- LST EN ISO 23306:2021 Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020)
- LST EN 61235-2001 Live working. Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified)
- LST EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
- LST HD 488 S1-2002 Gassing of insulating liquids under electrical stress and ionisation (IEC 60628:1985)
- LST EN 50195-2001 Code of practice for the safe use of fully enclosed askarel-filled electrical equipment
- LST EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
- LST EN ISO 11960:2011 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2011)
- LST EN ISO 11960:2021 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
IT-UNI, sheath gas effect
API - American Petroleum Institute, sheath gas effect
- API 4224-1974 THE ROLE OF ATMOSPHERIC CARBON MONOXIDE IN VEHICLE ACCIDENTS
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., sheath gas effect
Jiangsu Provincial Standard of the People's Republic of China, sheath gas effect
中国气象局, sheath gas effect
- QX/T 328-2016 Ammunition safe for weather modification operations
- QX/T 643-2022 Operating specifications for meteorological water electrolysis hydrogen production equipment
- QX/T 18-2020 Inspection specifications for 37mm anti-aircraft guns used in weather modification operations
- QX/T 505-2019 General technical requirements for aircraft operating in artificial weather modification operations
- QX/T 390-2017 Maintenance technical specifications for 37mm anti-aircraft guns used in weather modification operations
- QX/T 547-2020 Specifications for Application and Use of Airspace for Safe Ground Operations in Weather Modification
CENELEC - European Committee for Electrotechnical Standardization, sheath gas effect
- EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations
FI-SFS, sheath gas effect
Association of German Mechanical Engineers, sheath gas effect
- DVS 0205-1986
- DVS 0201-1986
- DVS 0213-1981 "Industrial gases for welding, cutting and allied working methods; helium"
- VDI 2264-2001 Commissioning, operation and maintenance of separator systems for the removal of gaseous and particulate substances from gas streams
- DVS 0801-1973 "Volume measurement of industrial gases for welding, cutting and allied working methods"
- DVS 0801-2002 "Volume measurement of industrial gases for welding, cutting and allied working methods"
未注明发布机构, sheath gas effect
- DIN EN ISO 11439:2022 Gas cylinders – High-pressure cylinders for the in-vehicle storage of natural gas as fuel for motor vehicles
- BS 5164:1975(2011) Specification for Indirect - acting electrical indicating and recording instruments and their accessories
- BS AU 50-3.8:1985(2001) Tyres and wheels — Part 3 : Valves — Section 8 : Code ofpractice for the selection and care oftyre inflation valves for commercial vehicles
American Gas Association, sheath gas effect
- AGA ILPG-1996 Introduction to LPG Safety for Propane-Air Plant Operators
VDI - Verein Deutscher Ingenieure, sheath gas effect
- VDI 2046-1969 Sicherheitstechnische Richtlinien fuer den Betrieb von Industrieoefen mit Schutz- und Reaktionsgasen
SE-SIS, sheath gas effect
- SIS SS IEC 258:1981 Electncal measuring instruments — Direct actmg recordmg instruments and their accessories
- SIS SS IEC 628:1986 Insulating oils - Gassing of insulating liquids under electrical stress and ionization
- SIS SS-ISO 2533:1987 Internationell standards giltighet som svensk standard
Professional Standard-Ships, sheath gas effect
- CB/T 3969-2005 Safety requirement of gas into cabin working for metal welding and incising
NZ-SNZ, sheath gas effect
- ESAEI-14-1968 CODE OF PRACTICE for INSPECTION AND TESTING of ELECTRICAL INSTALLATIONS
Professional Standard - Aviation, sheath gas effect
- HB 6647-1992 General specifications for actuators of aircraft aerodynamic systems
Group Standards of the People's Republic of China, sheath gas effect
- T/CMSA 0021-2021 Civil UAV Operation Meteorological Condition Level Plant Protection
- T/ZS 0314-2022 Operating rules for indoor air quality inspection of civil buildings
- T/CIESC 45-2023 Treated oilfield operation effluent for Reinjection
JP-JEM, sheath gas effect
- JEM 1445-2008 Inspection of solenoid operated valves used to air operated valves for nuclear power plant valves
国家能源局, sheath gas effect
- SY/T 6644-2018 Continuous gas lift design and construction procedures using injection pressure operated valves
- NB/T 14009-2016 Recommended practices for using shale gas drilling fluids oil-based drilling fluids
- SY/T 6524-2017 Specifications for equipping labor protection supplies in oil and gas workplaces
NO-SN, sheath gas effect
- NS 4860-1983 Air quality - Determination of total solid aerosols in work-place air with personal sampler
BE-NBN, sheath gas effect
The Society for Protective Coatings (SSPC), sheath gas effect
- SSPC TR 4-2000 Preparation of Protective Coating Specifications for Atmospheric Service (NACE 80200)
Professional Standard - Agriculture, sheath gas effect
- GB 4752-1984 Rural household water pressure biogas digester discharge operation rules
Shanxi Provincial Standard of the People's Republic of China, sheath gas effect
- DB14/T 1916-2019 Specifications for the use of airspace in ground weather modification operations
ZA-SANS, sheath gas effect
- SANS 10087-6:2006 The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial, and industrial installations Part 6: The application of liquefied petroleum and compressed natural gases as engine fuels for internal combustion engine
ESDU - Engineering Sciences Data Unit, sheath gas effect
- ESDU 85009 A-2007 Fluid transients in pipes. Use of air inlet/outlet valves as surge suppression devices.
CH-SNV, sheath gas effect
- SN EN ISO 23306:2021 Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020)
- SN EN ISO 22065:2021 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
- SN EN ISO 11960:2021 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
National Aeronautics and Space Administration (NASA), sheath gas effect
Indonesia Standards, sheath gas effect
- SNI 7610-2011 Gassing of insulating liquids under electrical stress and ionization
Professional Standard - Railway, sheath gas effect
- TB/T 2549-1995 Technical specification of JZ-7 type locomotive air brake action valve
VN-TCVN, sheath gas effect
- TCVN 7884-2008 A fire extinguishing self-operated by compressed gas equipment to pump water
Professional Standard - Electricity, sheath gas effect
- DL/T 687-1999 General specification for prevent electric mal-operation device with computer
- DL/T 687-2010 General specification for preventing electric mal-operation system with computer
Professional Standard - Petrochemical Industry, sheath gas effect
- NB/SH/T 0810-2010 Gassing of insulating liquids under electrical stress and ionization
Professional Standard - Civil Aviation, sheath gas effect
- MH/T 6091-2013 Operating procedure for adding static dissipator additive of commercial aviation fuel
国家市场监督管理总局、中国国家标准化管理委员会, sheath gas effect
- GB/T 39389-2020 Plastic composite hose for gas welding，cutting and allied processes
- GB/T 37474-2019 Methods and requirements of airbag system abuse test for automobile
国家铁路局, sheath gas effect
- TB/T 3564-2020 Electrified railway catenary operation car catenary special flat car
Institute of Electrical and Electronics Engineers (IEEE), sheath gas effect
- IEEE 2420-2019 IEEE Standard Criteria for Combustion Turbine-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
- IEEE Std 2420-2019 IEEE Standard Criteria for Combustion Turbine-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
- IEEE P2420/D2, September 2019 IEEE Draft Standard Criteria for Combustion Turbine Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
- IEEE Std 463-1974 IEEE Trial Use Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
- IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., sheath gas effect
- IEEE P2420/D1-2019 Draft Standard for Combustion Turbine Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
- IEEE 463-1974 Trial-Use Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
European Committee for Electrotechnical Standardization（CENELEC）, sheath gas effect
- EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts
- EN IEC 62990-2:2021 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours
- HD 488 S1-1988 Gassing of Insulating Liquids Under Electrical Stress and Ionization
US-FCR, sheath gas effect
NL-NEN, sheath gas effect
- NEN 5658-1971 Rubber hose without reinforcement for butane -, propane gas and natural gas with aworking pressure less than 0,05 bar
Society of Automotive Engineers (SAE), sheath gas effect
- SAE J2189-2011 Guidelines for Evaluating Child Restraint System Interactions with Deploying Airbags (Stabilized Type)
- SAE J2189-2001 Guidelines for Evaluating Child Restraint System Interactions with Deploying Airbags
SAE - SAE International, sheath gas effect
- SAE J2189-1993 Guidelines for Evaluating Child Restraint System Interactions with Deploying Airbags@ Information Report (March 1993)
CEN - European Committee for Standardization, sheath gas effect
- PREN 15220-2-2008 Railway applications - Brake indicators - Part 2: Electrical operation brake indicators