ZH

RU

ES

particle spectrometer

particle spectrometer, Total:500 items.

In the international standard classification, particle spectrometer involves: Fuels, Air quality, Domestic, commercial and industrial heating appliances, Medical equipment, Particle size analysis. Sieving, Agricultural machines, implements and equipment, Geology. Meteorology. Hydrology, Internal combustion engines, Floor treatment appliances, Burners. Boilers, Insulating fluids, ENERGY AND HEAT TRANSFER ENGINEERING, Protective equipment, Audio, video and audiovisual engineering, Installations in buildings, Linear and angular measurements, Plant and equipment for the food industry, Soil quality. Pedology, Components for electrical equipment, Analytical chemistry, Products of the chemical industry, Testing of metals, Hydraulic fluids, Semiconducting materials, Fluid power systems, Petroleum products in general, Lubricants, industrial oils and related products, Ventilators. Fans. Air-conditioners, Power transmission and distribution networks, Ceramics, Vocabularies, Tobacco, tobacco products and related equipment, Compressors and pneumatic machines, Domestic electrical appliances in general, Wastes, Water quality, TESTING, Nuclear energy engineering, Metrology and measurement in general, Internal combustion engines for road vehicles, Road vehicle systems, Construction materials, Aerospace fluid systems and components, Power stations in general, Environmental protection, Road vehicles in general, Physics. Chemistry, Kitchen equipment, Corrosion of metals, Coatings and related processes used in aerospace industry, Diagnostic, maintenance and test equipment, Dentistry, Road engineering, Barrels. Drums. Canisters, Processes in the food industry, Space systems and operations, Aids for disabled or handicapped persons, Semiconductor devices, Rubber, Measurement of fluid flow.


Professional Standard - Energy, particle spectrometer

  • NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)
  • NB/T 34026-2015 Biomass pellets burners
  • NB/SH/T 0868-2013 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method

国家能源局, particle spectrometer

  • SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

Group Standards of the People's Republic of China, particle spectrometer

  • T/CASME 77-2022 Laser particle sensor
  • T/CAMS CICEIA39-2020 Diesel engine particulate matter sensor
  • T/HFJX 2048-2020 Diesel Particulate Electric Filter (DPEF)
  • T/SAEPI 011-2022 Particle filter for air cleaner
  • T/CECA 78-2022 Porous sound-absorbing particles for microspeakers
  • T/CICEIA /CAMS3-2020 Diesel engine - Diesel particulate filter (DPF) cleaning device
  • T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
  • T/CAQI 35-2017 Graduation for particle purifying performance of fresh air type air cleaner
  • T/CAQI 17-2016 Graduation for particle purifying performance of filter-type air cleaner
  • T/CICEIA /CAMS24-2021 Diesel engine-Particulate filter-Product quality grading specification
  • T/GDBX 009-2019 Non-precious metal catalytic diesel engine exhaust particulate filter
  • T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
  • T/CRAAS 439.1-2022 General ventilation filters - Part 1: Efficiency of particulate matter (ePM) technical requirements
  • T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
  • T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration
  • T/CAEPI 36.2-2021 Technical Requirements for Pollution Control Devices for Gasoline Vehicles Part 2: Particulate Filters for Gasoline Vehicles
  • T/CAEPI 12.3-2017 Technical requirements for diesel vehicle exhaust after-treatment devices Part 3: Diesel particulate filter(DPF)

Professional Standard - Petroleum, particle spectrometer

American Society for Testing and Materials (ASTM), particle spectrometer

  • ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
  • ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
  • ASTM E550-87(2002) Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
  • ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
  • ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
  • ASTM D8208-19 Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
  • ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM F327-08(2022) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
  • ASTM D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM E550-87(2008) Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
  • ASTM E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM C697-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  • ASTM C697-10 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  • ASTM D3268-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • ASTM D3268-91(2018) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
  • ASTM D6209-21 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM F312-97 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
  • ASTM F312-97(2003) Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
  • ASTM E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
  • ASTM D7670-10 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
  • ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
  • ASTM D7439-08 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmax2013;Mass Spectrometry
  • ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM C809-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
  • ASTM F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
  • ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
  • ASTM D4358-84(1999) Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
  • ASTM D4358-05 Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
  • ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
  • ASTM F2519-05 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM F2519-05(2011) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM F2519-05(2011)e1 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM F2519-05(2015) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM G76-05 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • ASTM G76-04 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
  • ASTM D7619-12a Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM D7690-11(2017) Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
  • ASTM E3053-17 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
  • ASTM E3053-18e1 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
  • ASTM E3053-18 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
  • ASTM D7650-21 Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
  • ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM G76-95 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • ASTM G76-95(2000) Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
  • ASTM G76-18 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • ASTM D7670-10(2021) Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
  • ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • ASTM D7619-17 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM D6209-98e1 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D6209-98(2012) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM D6209-98(2004) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D6209-13 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM F312-08 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

German Institute for Standardization, particle spectrometer

  • DIN 58920:2000 Filter elements - Particle filtration in fluids - Characterisation of the particle retention
  • DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
  • DIN EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method; German version EN 14666:2005
  • DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
  • DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
  • DIN EN 15805:2022-06 Particulate air filters for general ventilation - Standardised dimensions; German version EN 15805:2021
  • DIN EN 17745:2022-11 Agricultural and forestry machinery - Environmental requirements for granule applicator of Plant Protection Products; German and English version prEN 17745:2022 / Note: Date of issue 2022-10-21
  • DIN EN 143:2021-07 Respiratory protective devices - Particle filters - Requirements, testing, marking; German version EN 143:2021
  • DIN ISO 10362-1:2021-02 Cigarettes - Determination of water in total particular matter from the mainstream smoke - Part 1: Gas-chromatographic method (ISO 10362-1:2019)
  • DIN EN ISO 29463-2:2019-05 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German version EN ISO 29463-2:2018
  • DIN 19569-8:2005-06 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 8: Specific principles for the equipment for sewage treatment in granular media filter and granular fixed bed filter
  • DIN EN 17745:2022 Agricultural and forestry machinery - Environmental requirements for granule applicator of Plant Protection Products; German and English version prEN 17745:2022
  • DIN EN 15270:2008-03 Pellet burners for small heating boilers - Definitions, requirements, testing, marking; German version EN 15270:2007
  • DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
  • DIN ISO 12884:2000-12 Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000)
  • DIN EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
  • DIN EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German and English version prEN ISO 29463-2:2018
  • DIN EN 16602-70-50:2015-05 Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms; English version EN 16602-70-50:2015
  • DIN ISO 10362-1:2021 Cigarettes - Determination of water in total particular matter from the mainstream smoke - Part 1: Gas-chromatographic method (ISO 10362-1:2019)
  • DIN EN IEC 63295:2023-05 Specification for WB series glass beads with 50 <OMEGA> impedance for RF connectors (IEC 63295:2022); German version EN IEC 63295:2022 / Note: Date of issue 2023-04-14
  • DIN EN 1827:2009-11 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999+A1:2009
  • DIN 54408:1998 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN EN 13274-7:2019 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
  • DIN 71460-1:2006-04 Road vehicles - Air filters for motor passenger compartments - Part 1: Test for particulate filtration
  • DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
  • DIN EN 16510-2-7:2023-06 Residential solid fuel burning appliances - Part 2-7: Combination appliances fired by wood logs and pellets; German and English version prEN 16510-2-7:2023 / Note: Date of issue 2023-05-19
  • DIN EN 13274-7:2008 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration; English version of DIN EN 13274-7:2008-04
  • DIN 10502-2:2014 Food hygiene - Containers for liquid, granulated and powdered foodstuffs - Part 2: Cleaning and disinfection
  • DIN EN 549:2019-09 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration; German version EN 13274-7:2019
  • DIN EN 13274-7:2019-09 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration; German version EN 13274-7:2019
  • DIN 10502-2:2014-05 Food hygiene - Containers for liquid, granulated and powdered foodstuffs - Part 2: Cleaning and disinfection
  • DIN 50452-3:1995 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 3: Calibration of optical particle counters
  • DIN EN 14666:2005-09 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method; German version EN 14666:2005
  • DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
  • DIN CEN/TS 17307:2019-07*DIN SPEC 3759:2019-07 Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution: German version CEN/TS 17307:2019
  • DIN 10502-6:2004 Food hygiene - Containers for liquid, granulated and powdered foodstuffs - Part 6: Cleaning and disinfection
  • DIN 71460-1:2006 Road vehicles - Air filters for motor passenger compartments - Part 1: Test for particulate filtration

Association of German Mechanical Engineers, particle spectrometer

  • VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
  • VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
  • VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
  • VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods
  • VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
  • VDI 3679 Blatt 1-1998 Wet separators for particle collection
  • VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
  • VDI 3491 Blatt 7-1987 Particulate matter measurement; generation of test aerosols; Rapaport-Weinstock generator
  • VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
  • VDI 3491 Blatt 6-1980 Particulate matter measurement; generation of test aerosols; platinum oxide generator
  • VDI 3679 Blatt 1-2014 Wet separators - Fundamentals, waste gas cleaning of particle collections
  • VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer
  • VDI 3491 Blatt 3-1980 Particulate matter measurement; generation of latex aerosols using nozzle atomizers
  • VDI 3491 Blatt 12-1990 Particulate matter measurement; generation of test aerosols using centrifugal atomizers
  • VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
  • VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
  • VDI 3491 Blatt 13-1996 Particulate matter measurement - Generation of test aerosols using a vibrating-orifice generator
  • VDI 3491 Blatt 11-1990 Particulate matter measurement; generation of test aerosols using ultrasonic atomizers
  • VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
  • VDI 3491 Blatt 16-1996 Particulate matter measurement - Generation of carbon aerosols using a spark aerosol generator
  • VDI 3491 Blatt 9-1989 Particulate matter measurement; generation of test aerosols with a rotating brush generator
  • VDI 2268 Blatt 4-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by graphite-furnace atomic absorption spectrometry
  • VDI 3491 Blatt 5-1980 Particulate matter measurement; generation of test aerosols by nebulization of dye-solutions with nozzle atomizers
  • VDI 3861 Blatt 1-1989 Measurement of fibrous particles; manual measurement of asbestos in flowing clean exhaust gas; determination of asbestos mass concentration by IR-spectroscopy
  • VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, particle spectrometer

  • GB/T 42660-2023 Calibration of aerosol particle number concentration condensation nuclei particle counters
  • GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
  • GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
  • GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
  • GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
  • GB/T 24351-2009 Universal technical specifications for vertical counter-flow pellet feed coolers
  • GB/T 18854-2015 Hydraulic fluid power.Calibration of automatic particle counters for liquids
  • GB/T 18854-2002 Hydraulic fluid power--Calibration of liquid automatic particle counters
  • GB 2626-2006 Respiratory protective equipment. non-powered air-purifying particle respirator
  • GB/T 27991-2011 Fundamental technical requirements for sediment measurement and particle size analysis instrument in open channel
  • GB/T 29023.1-2012 Measurement and characterization of particles by acoustic methods.Part 1:Concepts and procedures in ultrasonic attenuation spectroscopy

Indonesia Standards, particle spectrometer

Professional Standard - Meteorology, particle spectrometer

  • QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method

Professional Standard - Machinery, particle spectrometer

  • JB/T 11254-2011 Vertical post-cooker for pellet feed
  • JB/T 12653-2016 Diesel engines.Technical specifications of particle oxidation catalytic converter (POC)

Professional Standard - Grain, particle spectrometer

Professional Standard - Agriculture, particle spectrometer

  • SB/T 10125-1992 Vertical Cascade Pellet Cooler
  • 空气和废气监测分析方法 7.5.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
  • 空气和废气监测分析方法 7.5.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
  • 空气和废气监测分析方法 7.5.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Five Particle Composition Spectrum Establishment Four Source and Receptor Composition Spectrum Data Evaluation
  • 空气和废气监测分析方法 7.5.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 5 Establishment of Particulate Matter Composition Spectrum Three Sources and Receptor Chemical Composition Scope
  • SN/T 5580-2023 Determination of Gold Content in Copper Concentrate Enrichment and Separation of Foam-based Granular Activated Carbon-Inductively Coupled Plasma Emission Spectrometry

GB-REG, particle spectrometer

RU-GOST R, particle spectrometer

  • GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
  • GOST 28110-1989 Equipment for cheese grain manufacture. Technical requirements
  • GOST 12.4.246-2016 Occupational safety standards system. Respiratory protective equipment. Particle filters. General specifications
  • GOST R ISO 12884-2007 Ambient air. Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter
  • GOST R ISO 30011-2017 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • GOST R 54012-2010 Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806

工业和信息化部/国家能源局, particle spectrometer

  • JB/T 13202.3-2017 Diesel engine particle capture system Part 3: Particle sensor technical conditions
  • JB/T 13202.4-2017 Diesel engine particle capture system Part 4: Particle trap technical conditions
  • JB/T 12777-2016 Flip plate pellet feed cooler
  • JB/T 13202.5-2017 Diesel particulate capture system Part 5: Burner technical conditions

Professional Standard - Electricity, particle spectrometer

  • DL/T 1096-2008 Limited value of particulate pollutant of transformer oils
  • DL/T 1096-2018 Limited value of particulate pollutant of transformer oils

US-FCR, particle spectrometer

Hebei Provincial Standard of the People's Republic of China, particle spectrometer

Association Francaise de Normalisation, particle spectrometer

  • FD ISO 8518:2002 Air des lieux de travail - Dosage du plomb particulaire et des composés particulaires du plomb - Méthode par spectrométrie d'absorption atomique dans la flamme ou méthode par spectrométrie d'absorption avec atomisation électrothermique
  • XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
  • NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
  • NF ISO 10315:2022 Cigarettes - Dosage de la nicotine dans la matière particulaire totale du courant principal de fumée - Méthode par chromatographie en phase gazeuse
  • NF E48-663:2011 Hydraulic fluid power - Calibration of automatic particle counters for liquids.
  • NF E48-663:2021 Hydraulic fluid power - Calibration of automatic particle counters for liquids
  • NF EN ISO 29463-2:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 2 : production d'aérosol, équipement de mesure et statistique de comptage de particules
  • NF ISO 12500-3:2009 Filtres pour air comprimé - Méthodes d'essai - Partie 3 : particules
  • NF EN 143:2021 Appareils de protection respiratoire - Filtres à particules - Exigences, essais, marquage
  • NF V37-026*NF ISO 10315:2022 Cigarettes - Determination of nicotine in total particulate matter from the mainstream smoke - Gas-chromatographic method
  • NF ISO 10362-1:2020 Cigarettes - Dosage de l'eau dans la matière particulaire totale du courant principal de fumée - Partie 1 : méthode par chromatographie en phase gazeuse
  • NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.
  • NF X44-014-2*NF EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2 : aerosol production, measuring equipment and particle-counting statistics
  • NF V37-011-1*NF ISO 10362-1:2020 Cigarettes - Determination of water in total particulate matter from the mainstream smoke - Part 1 : gas-chromatographic method
  • NF EN 15805:2021 Filtres à air de ventilation générale pour l'élimination des particules - Dimensions normalisées
  • NF EN 15270:2008 Brûleurs à granulés pour petites chaudières de chauffage - Définitions, exigences, essais, marquage
  • NF EN 14666:2005 Agents de surface - Détermination de la teneur en tétra-acétyl-éthylène diamine (TAED) dans les granulés de TAED - Méthode par chromatographie en phase gazeuse
  • NF T73-288*NF EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas-chromatographic method
  • NF EN 1827/IN1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
  • NF EN 1827+A1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
  • FD X43-102*FD ISO 8518:2002 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
  • NF ISO 21438-3:2010 Air des lieux de travail - Détermination des acides inorganiques par chromatographie ionique - Partie 3 : acide fluorhydrique et fluorures particulaires
  • NF ISO 22253:2019 Cigarettes - Dosage de la nicotine dans la matière particulaire totale provenant du courant principal de fumée avec un régime de fumage intense - Méthode par chromatographie en phase gazeuse
  • XP CEN ISO/TS 21083-2:2019 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 2 : spectre granulométrique de 3 nm à 30 nm
  • NF X43-204*NF ISO 16740:2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
  • NF EN ISO 18635:2017 Qualité de l'eau - Détermination des alcanes polychlorés à chaîne courte dans les sédiments et matières en suspension (particules) - Méthode par chromatographie en phase gazeuse-spectrométrie de masse (CG-SM) et ionisation chimique négative ...
  • NF V37-204*NF ISO 22253:2019 Cigarettes - Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime - Gas-chromatographic method
  • NF R19-501-9:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 9 : particle sizing and counting by automatic light extinction particle counter.
  • NF S76-007-7*NF EN 13274-7:2019 Respiratory protective devices - Methods of test - Part 7 : determination of particle filter penetration
  • NF EN ISO 29463-3:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 3 : méthode d'essai des filtres à feuille plate
  • NF EN 13274-7:2019 Appareils de protection respiratoire - Méthodes d'essai - Partie 7 : détermination de la pénétration des filtres à particules
  • NF ISO 30011:2010 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie de masse avec plasma à couplage inductif
  • NF EN ISO 29463-5:2022 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 5 : méthode d'essai des éléments filtrants
  • NF EN 60749-16:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 16 : détection de bruit d'impact de particules (PIND)
  • XP T43-124*XP ISO/TS 22638:2018 Rubber - Generation and collection of tyre and road wear particles (TRWP) - Road simulator laboratory method

VN-TCVN, particle spectrometer

  • TCVN 6152-1996 Ambient air.Determination of the particulate lead content of aerosols collected on filters.Atomic absorption spectrometric method

International Organization for Standardization (ISO), particle spectrometer

  • ISO 9855:1993 Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method
  • ISO 11171:2010 Hydraulic fluid power - Calibration of automatic particle counters for liquids
  • ISO 11171:1999 Hydraulic fluid power - Calibration of automatic particle counters for liquids
  • ISO 11171:2020 Hydraulic fluid power - Calibration of automatic particle counters for liquids
  • ISO 11171:2016 Hydraulic fluid power - Calibration of automatic particle counters for liquids
  • ISO 11171:2022 Hydraulic fluid power — Calibration of automatic particle counters for liquids
  • ISO/CD 8417 Risk management of particulate contamination for devices with intravascular access
  • ISO 8518:2001 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
  • ISO/TS 21220:2009 Particulate air filters for general ventilation - Determination of filtration performance
  • ISO/TS 20593:2017 Ambient air - Determination of the mass concentration of tire and road wear particles (TRWP) - Pyrolysis-GC-MS method
  • ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
  • ISO 10362-1:2019 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • ISO/TR 4808:2021 Hydraulic fluid power - Interpolation method for particle count and filter test data
  • ISO 11171:1999/Cor 1:2001 Hydraulic fluid power - Calibration of automatic particle counters for liquids; Technical Corrigendum 1
  • ISO 22253:2019 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime — Gas-chromatographic method
  • ISO 8518:2022 Workplace air — Determination of particulate lead and lead compounds — Flame and electrothermal atomic absorption spectrometric methods
  • ISO/TS 11155-1:2001 Road vehicles - Air filters for passenger compartments - Part 1: Test for particle filtration
  • ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
  • ISO 16740:2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
  • ISO/PRF 11174 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method
  • ISO 11174:2023 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method
  • ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
  • ISO/TR 11155-1:1994 Road vehicles - Air filters for passenger compartments - Part 1: Test for particle filtration
  • ISO/TR 22681:2019 Hydraulic fluid power — Impact and use of ISO 11171:2016 μm(b) and μm(c) particle size designations on particle count and filter test data
  • ISO/TR 4813:2021 Hydraulic fluid power - Background, impact and use of ISO 11171:2020 on particle count and filter test data
  • ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
  • ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
  • ISO/DIS 22638 Rubber — Generation and collection of tyre and road wear particles (TRWP) — Road simulator laboratory method
  • ISO/TS 22638:2018 Rubber — Generation and collection of tyre and road wear particles (TRWP) — Road simulator laboratory method

Korean Agency for Technology and Standards (KATS), particle spectrometer

  • KS I ISO 9855:2005 Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS P 8416-2008(2019) Dust respirators for fine particles
  • KS I 4016-2019 Test methods for remanufactured particle sensor of air purifier
  • KS I ISO 16362-2005(2020) Ambient air-Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
  • KS I ISO 9855-2005(2020) Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS B ISO 11171:2008 Hydraulic fluid power-Calibration of automatic particle counters for liquids
  • KS B ISO 11171-2017(2022) Hydraulic fluid power-Calibration of automatic particle counters for liquids
  • KS B ISO 11171:2015 Hydraulic fluid power-Calibration of automatic particle counters for liquids
  • KS B ISO 11171:2017 Hydraulic fluid power-Calibration of automatic particle counters for liquids
  • KS L 1618-1-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test methods of properties of ceramic granules-Part 1:Size distribution of granules
  • KS I ISO 8518:2006 Workplace air-Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
  • KS H ISO 10362-1:2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • KS B ISO 29463-2:2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
  • KS I ISO 12884-2008(2018) Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • KS I ISO 11174:2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
  • KS I ISO 8518-2006(2017) Workplace air-Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
  • KS I ISO 30011-2012(2017) Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • KS I ISO 21438-3-2012(2017) Workplace atmospheres-Determination of inorganic acids by ion chromatography-Part 3:Hydrofluoric acid and particulate fluorides
  • KS R ISO 11155-1:2008 Road vehicles-Air filters for passenger compartments-Part 1:Test for particulate filtration
  • KS R ISO 13353:2009 Diesel fuel and petrol filters for internal combustion engines-Initial efficiency by particle counting
  • KS R ISO 13353:2004 Diesel fuel and petrol filters for internal combustion engines-Initial efficiency by particle counting
  • KS I ISO 16740:2007 Workplace air-Determination of hexavalent chromium in airborne particulate matter-Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
  • KS I ISO 8518:2021 Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method
  • KS I ISO 16740-2007(2017) Workplace air-Determination of hexavalent chromium in airborne particulate matter-Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
  • KS I ISO 21438-3:2012 Workplace atmospheres-Determination of inorganic acids by ion chromatography-Part 3:Hydrofluoric acid and particulate fluorides
  • KS P ISO 17190-11:2021 Urine-absorbing aids for incontinence — Test materials — Part 11: Determination of content of respirable particles
  • KS C IEC 60749-16-2006(2021) Semiconductor devices-Mechanical and climatic test methods-Part 16:Particle impact noise detection(PIND)
  • KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
  • KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling

National Metrological Verification Regulations of the People's Republic of China, particle spectrometer

  • JJG 1061-2010 Verification Regulation of Liquid-borne Particle Counters
  • JJG 943-1998 Verification Regulation of Total Suspended Particulate Sampler
  • JJG 943-2011 Verification Regulation of Total Suspended Particulates Sampler

Underwriters Laboratories (UL), particle spectrometer

  • UL 586-2009 UL Standard for Safety High-Efficiency@ Particulate@ Air Filter Units (Ninth Edition; Reprint with revisions through and including December 19@ 2017)

IN-BIS, particle spectrometer

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., particle spectrometer

Japanese Industrial Standards Committee (JISC), particle spectrometer

  • JIS T 8157:2018 Powered air purifying respirator for particulate matter
  • JIS B 7954:2001 Automatic monitors for suspended particulate matter in ambient air
  • JIS B 7954:1988 Automatic moniters for suspended particulate matter in ambient air
  • JIS B 9932:2000 Hydraulic fluid power -- Calibration of liquid automatic particle counters
  • JIS B 9932:2003 Hydraulic fluid power -- Calibration of automatic particle counters for liquids
  • JIS B 9932:2015 Hydraulic fluid power -- Calibration of automatic particle counters for liquids
  • JIS B 9927-2:2022 High-efficiency filters (EPA, HEPA and ULPA) and filter media for removing particles in air -- Part 2: Aerosol production, measuring equipment and particle-counting statistics
  • JIS A 1126:1993 Method of test for soft particles in coarse aggregates by use of scratch tester

Professional Standard - Petrochemical Industry, particle spectrometer

  • SH/T 0573-1993 In-use Lubricating Oil Wear Particle Test (Analytical Ferrography)

Professional Standard - Water Conservancy, particle spectrometer

  • SL/T 208-1998 Instrument for sediment measurement and particle size analysis in open channel

British Standards Institution (BSI), particle spectrometer

  • BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
  • BS ISO 9912-4:2018 Agricultural irrigation equipment. Filters for microirrigation. Granulated media filters
  • PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
  • BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
  • BS EN 12083:1998 Respiratory protective devices - Filters with breathing hoses, (non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
  • BS EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air. Aerosol production, measuring equipment and particle-counting statistics
  • BS EN 779:2002 Particulate air filters for general ventilation. Determination of the filtration performance
  • BS EN 779:2012 Particulate air filters for general ventilation. Determination of the filtration performance
  • BS EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method
  • BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
  • BS ISO 10362-1:2019 Tracked Changes. Cigarettes. Determination of water in total particulate matter from the mainstream smoke. Gas-chromatographic method
  • BS EN 15805:2021 Particulate air filters for general ventilation. Standardised dimensions
  • BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
  • 20/30414922 DC BS ISO 10315. Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke. Gaschromatographic method
  • BS ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by automatic light extinction particle counter
  • BS ISO 10315:2021 Tracked Changes. Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke. Gas-chromatographic method
  • BS EN 1827:1999+A1:2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
  • BS EN 1827:1999 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
  • BS ISO 11174:2023 Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
  • BS EN 149:2001+A1:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
  • PD ISO/TR 4808:2021 Hydraulic fluid power. Interpolation method for particle count and filter test data
  • 20/30408412 DC BS EN 15805. Particulate air filters for general ventilation. Standardised dimensions
  • BS ISO 8518:2005 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
  • 22/30440759 DC BS EN 17745. Agricultural and forestry machinery. Environmental requirements for granule applicator of Plant Protection Products
  • BS ISO 22253:2019 Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime. Gas-chromatographic method
  • BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
  • 22/30435294 DC BS ISO 11174. Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
  • 21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
  • BS EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics
  • BS EN 1822-2:1998 High efficiency air filters (HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics
  • BS EN 1822-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics
  • BS EN 13274-7:2019 Tracked Changes. Respiratory protective devices. Methods of test. Determination of particle filter penetration
  • 21/30395416 DC BS ISO 8518. Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method
  • BS ISO 30011:2010 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • BS EN 16510-2-6:2022 Residential solid fuel burning appliances - Mechanically by wood pellets fed roomheaters, inset appliances and cookers
  • BS ISO 11174:1997 Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electro-thermal atomic absorption spectrometric method
  • BS ISO 8518:2022 Tracked Changes. Workplace air. Determination of particulate lead and lead compounds. Flame and electrothermal atomic absorption spectrometric methods
  • BS ISO 16900-3:2012 Respiratory protective devices. Methods of test and test equipment - Determination of particle filter penetration
  • PD ISO/TR 16386:2014 Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards
  • BS EN 16602-70-50:2015 Space product assurance. Particles contamination monitoring for spacecraft systems and cleanrooms
  • 14/30286661 DC BS EN 16510-2-6. Residential solid fuel burning appliances. Part 2-6. Appliances fired by wood pellets
  • PD ISO/TR 22681:2019 Hydraulic fluid power. Impact and use of ISO 11171:2016 µm(b) and µm(c) particle size designations on particle count and filter test data
  • BS PD ISO/TR 16386:2014 Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards
  • BS ISO/TR 16386:1999 Impact of changes in ISO fluid power particle counting - Contamination control and filter test standards
  • BS ISO/TR 16386:2000 Impact of changes in ISO fluid power particle counting - Contamination control and filter test standards
  • BS ISO 21018-3:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Use of the filter blockage technique
  • 20/30408621 DC BS 6256. Packaging for terminally-sterilized medical devices. Method for determination of methylene blue particulate penetration
  • BS ISO 11041:1997 Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry

Military Standard of the People's Republic of China-General Armament Department, particle spectrometer

  • GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
  • GJB 380.3-1987 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration
  • GJB 380.3A-2015 Aviation Service Fluid Contamination Testing Part 3: Automatic Particle Counter Calibration

国家市场监督管理总局、中国国家标准化管理委员会, particle spectrometer

  • GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
  • GB/T 39990-2021 Particulate─Bioaerosol sampler─Technical specification
  • GB/T 36533-2018 Determination of the chemical state of micro-iron in silicate—Auger electron spectroscopy
  • GB 2626-2019 Respiratory protection—Non-powered air-purifying particle respirator
  • GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air

HU-MSZT, particle spectrometer

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), particle spectrometer

Professional Standard - Aviation, particle spectrometer

  • HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System
  • HB 5931.3-1986 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration

Danish Standards Foundation, particle spectrometer

  • DS/ISO 16362:2007 Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
  • DS/ISO 10315:2021 Cigarettes – Determination of nicotine in total particulate matter from the mainstream smoke – Gas-chromatographic method
  • DS/EN 143:2021 Respiratory protective devices – Particle filters – Requirements, testing, marking
  • DS/EN 779:1993 Particulate air filters for general ventilation. Requirements, testing, marking
  • DS/EN 14666:2005 Surface active Agents – Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules – Gas chromatographic method
  • DS/EN 15270:2012 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
  • DS/EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods
  • DS/EN 1827+A1:2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
  • DS/EN 13274-7:2008 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration

未注明发布机构, particle spectrometer

  • DIN EN 1822-2:1998 High efficiency particulate air filters (HEPA and ULPA) — Part 2: Aerosol production, measuring equipment, particle counting statistics
  • BS 5540-6:1990(2011) Evaluating particulate contamination of hydraulic fluids — Part 6 : Method of calibrating liquid automatic particle - count instruments (using mono - sized latex spheres)
  • DIN EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking; German version EN 143:2000
  • BS ISO 11174:1996(1998) Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electro - thermal atomic absorption spectrometric method
  • SAE ARP785A-1996 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure

National Metrological Technical Specifications of the People's Republic of China, particle spectrometer

  • JJF 1736-2018 Program of Pattern Evaluation of Total Suspended Particulates Samplers

Society of Automotive Engineers (SAE), particle spectrometer

  • SAE J2943-2022 Recommended Practice for Filter Weighing of Particulate Matter Emissions
  • SAE AMS1531D-2008 Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
  • SAE ARP785-1963 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION IN HYDRAULIC FLUIDS BY THE CONTROL FILTER GRAVIMETRIC PROCEDURE
  • SAE ARP785B-2020 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
  • SAE ARP785A-2002 Aerospace - Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, particle spectrometer

  • GB/T 35309-2017 Practice for evaluation of granular polysilicon by melter-zoner and spectroscopies
  • GB/T 30475.3-2017 Filters for compressed air—Test methods—Part 3: Particulates
  • GB/T 29024.4-2017 Determination of particle size distribution-Single particle light interaction methods-Part 4: Light scattering airborne particle counter for clean spaces
  • GB/T 36082-2018 Nanotechnologies—Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening—FT-IR method

AENOR, particle spectrometer

  • UNE 77230:1998 AMBIENT AIR. DETERMIANTION OF THE PARTICULATE LEAD CONTENT OF AEROSOLS COLLECTED ON FILTERS. ATOMIC ABSORPTION SPECTROMETRIC METHOD.
  • UNE-ISO 16362:2006 Ambient air -- Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography (ISO 16362:2005)
  • UNE 77250:2001 Ambient air. Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectometric analyses.
  • UNE-EN 14666:2005 Surface active Agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method
  • UNE-EN 15270:2009 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
  • UNE 81587:2017 Workplace exposure. Determination of metals and metalloids in airborne particles. Atomic Spectrometry method.
  • UNE-EN 14785:2007 Residential space heating appliances fired by wood pellets - Requirements and test methods
  • UNE-EN 1827:1999+A1:2010 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking

European Committee for Standardization (CEN), particle spectrometer

  • EN 12083:1998 Respiratory protective devices - Filters with breathing hoses (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
  • EN 779:2002 Particulate air filters for general ventilation - Determination of the filtration performance
  • EN 779:1993 Particulate Air Filters for General Ventilation - Requirements, Testing, Marking
  • EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gaschromatographic method
  • EN 149:1991 Respiratory protective devices; filtering half masks to protect against particles; requirements, testing, marking
  • CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
  • EN 16602-70-50:2015 Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms
  • EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements

Standard Association of Australia (SAA), particle spectrometer

  • AS/NZS 3580.9.15:2014
  • AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
  • AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
  • AS/NZS 3580.9.12:2013

CZ-CSN, particle spectrometer

  • CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter

U.S. Military Regulations and Norms, particle spectrometer

PL-PKN, particle spectrometer

  • PN P50172-1989 Paper products Determination number conducting particles at condenser tissue paper
  • PN M52051-1973 Pours filters Determination of the kinetic porosity and mean characteristic dimension of the bed filter grains
  • PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator

ES-UNE, particle spectrometer

  • UNE-EN 15805:2022 Particulate air filters for general ventilation - Standardised dimensions
  • UNE-EN 143:2022 Respiratory protective devices - Particle filters - Requirements, testing, marking
  • UNE-EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
  • UNE-CEN/TS 17307:2020 EX Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
  • UNE-EN 16602-70-50:2015 Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms (Endorsed by AENOR in March of 2015.)
  • UNE-EN 13274-7:2020 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration

工业和信息化部, particle spectrometer

  • JC/T 2396-2017 Wall flow honeycomb ceramics for diesel particulate traps

Professional Standard - Environmental Protection, particle spectrometer

  • HJ 646-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry
  • HJ 1271-2022 Ambient Air—Determination of formic acid, acetic acid and oxalic acid in particulate matter—Ion chromatography
  • HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler
  • HJ 830-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Wavelength dispersive X-ray fluorescence spectroscopy (WD-XRF) method
  • HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method
  • HJ 647-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons.High performance liquid chromatography
  • HJ 800-2016 Ambient air-Determination of the water soluble cations(Li+、Na+、NH4+、K+、Ca2+、Mg2+) from atmospheric particles-Ion chromatography
  • HJ 2023-2012 Technical specifications of expanded granular sludge bed (EGSB) reactor for wastewater treatment
  • HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
  • HJ 657-2013 Ambient air and stationary source emission.Determination of metals in ambient particulate matter.Inductively coupled plasma/mass spectrometry (ICP-MS)
  • HJ 777-2015 Ambient air and waste gas from stationary sources emission -Determination of metal elements in ambient particle matter-Inductively coupled plasma optical emission spectrometry
  • HJ 799-2016 Determination of water-soluble anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, SO32-, SO42-) in ambient air particulate matter by ion chromatography
  • HJ 657-2013(XG1-2018) Determination of lead and other metal elements in air and exhaust gas particulate matter Inductively coupled plasma mass spectrometry "No. 1 Amendment"
  • HJ/T 368-2007 Technical requirement for environmental protection products. Special orifice flowmeters for total suspended particulate sampler calibration
  • HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"

Professional Standard - Ocean, particle spectrometer

  • HY/T 133-2010 Determination of spectral absorption coefficient of particles and dissolved material for seawater-Spectrophotometry

KR-KS, particle spectrometer

  • KS H ISO 10315-2022 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic method
  • KS H ISO 10362-1-2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • KS B ISO 29463-2-2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
  • KS I ISO 11174-2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
  • KS R ISO 11155-1-2008(2023) Road vehicles-Air filters for passenger compartments-Part 1:Test for particulate filtration
  • KS I ISO 21438-3-2022 Workplace atmospheres Determination of inorganic acids by ion chromatography Part 3: Hydrofluoric acid and particulate fluorides
  • KS R ISO 13353-2004 Diesel fuel and petrol filters for internal combustion engines-Initial efficiency by particle counting
  • KS R 1190-2023 Test method for automotive brake wear particle measurement using brake dynamometer
  • KS I ISO 8518-2021 Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method
  • KS I ISO 30011-2022 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
  • KS P ISO 17190-11-2021 Urine-absorbing aids for incontinence — Test materials — Part 11: Determination of content of respirable particles

BE-NBN, particle spectrometer

  • NBN EN 779-1993 Particulate air filters for general ventilation - Requirements, testing, marking

Lithuanian Standards Office , particle spectrometer

  • LST ISO 12884:2001 Ambient air. Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • LST ISO 9855:2003 Ambient air. Determination of the particulate lead content of aerosols collected on filters. Atomic absorption spectrometric method (idt ISO 9855:1993)
  • LST EN 14666-2005 Surface active Agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method
  • LST EN 15270-2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
  • LST EN 14785-2006 Residential space heating appliances fired by wood pellets - Requirements and test methods
  • LST EN 1827-2001+A1-2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
  • LST EN 13274-7-2008 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
  • LST ISO 8518:2003 Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method (idt ISO 8518:2001)
  • LST ISO 11174:2003 Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method (idt ISO 11174:1996)

Professional Standard - Commodity Inspection, particle spectrometer

  • SN/T 2420-2010 Determination of active ingredient content in insecticide thiamethoxam water dispersible granules-High performance liquid chromatography
  • SN/T 3230-2012 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method

NL-NEN, particle spectrometer

  • NEN-EN 779-1994 Particulate air filters for general ventilation. Requirements, testing, marking

API - American Petroleum Institute, particle spectrometer

  • API PUBL 4365-1983 Characterization of Particulate Emissions from Refinery Process Heaters and Boilers

CEN - European Committee for Standardization, particle spectrometer

  • PREN 16510-2-6-2014 Residential solid fuel burning appliances - Part 2-6 Appliances fired by wood pellets
  • PD CEN/TS 17307:2019 Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gaschromatography and mass-spectrometric detection of pyrolysis products in solution
  • PREN 13274-7-2018 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
  • PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

NZ-SNZ, particle spectrometer

  • AS/NZS 4886:2007 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission
  • AS/NZS 4014.6:2007 Domestic solid fuel burning appliances-Test fuels Part 6: Wood pellets

American National Standards Institute (ANSI), particle spectrometer

  • ANSI/ASTM F658:2000 Practice for Defining Size, Calibration, Resolution, and Counting Accuracy of Liquid-Borne Particle Counter Using Near-Monodisperse Spherical Particulate Material
  • ANSI/ASTM F649:2001 Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures
  • ANSI/ASTM F2519:2011 Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors

Professional Standard - Automobile, particle spectrometer

  • QC/T 1001-2015 Evaluating filtration performance of lubricating oil filters for automobiles.Method of particle counting
  • QC/T 1007-2015 Evaluating filtration performance of fuel filters for automobiles.Method of particle counting

GM Global, particle spectrometer

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, particle spectrometer

  • GJB 380.3A-2004 Contamination test method of operating fluid for aviation Part 3:Calibration of automatic particle counters

Canadian General Standards Board (CGSB), particle spectrometer

中华人民共和国环境保护部, particle spectrometer

  • (HJ 2023-2012) Technical specifications of expanded granular sludge bed(EGSB)reactor for wastewater treatment

Professional Standard - Aerospace, particle spectrometer

  • QJ 2863-1996 Particle impact noise detection (PIND) requirements and methods for aerospace electronic components

Shandong Provincial Standard of the People's Republic of China, particle spectrometer

  • DB37/T 3459-2018 Determination of Copper and Zinc in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province by Inductively Coupled Plasma Mass Spectrometry

NO-SN, particle spectrometer

  • NS 3058-2-1994 Enclosed wood heaters. Smoke emission. Part 2: Determination of particulate emission

Heilongjiang Provincial Standard of the People's Republic of China, particle spectrometer

  • DB23/T 2076-2018 Determination of Pb, Cd and As elements in ambient air fine particulate matter (PM2.5) by wavelength dispersive-X-ray fluorescence spectrometry

Professional Standard - Medicine, particle spectrometer

  • YY/T 0805.3-2010 Dentistry.Diamond rotary instrument.Part 3:Grit size designation and color code

(U.S.) Ford Automotive Standards, particle spectrometer

  • FORD WSS-M99C125-A1-2009 ADDITIVE, CERIUM BASED FOR USE WITH DIESEL PARTICULATE FILTERS ***TO BE USED WITH FORD WSS-M99P1111-A***




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved