ZH
RU
ES

Standard atmosphere for conditions and tests

Standard atmosphere for conditions and tests, Total:357 items.

In the international standard classification, Standard atmosphere for conditions and tests involves: Test conditions and procedures in general, Paper and board, Pulps, Footwear, Plastics, Installations in buildings, Products of the textile industry, Petroleum products in general, Linear and angular measurements, Geology. Meteorology. Hydrology, Environmental testing, Road vehicles in general, Air quality, Corrosion of metals, Rubber, Domestic, commercial and industrial heating appliances, Equipment for petroleum and natural gas industries, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Reinforced plastics, Metrology and measurement in general, Industrial automation systems, Solar energy engineering, Protection of and in buildings, Petroleum, petroleum products and natural gas handling equipment, Protection against fire, Natural gas, Non-destructive testing, Textile fibres, Standardization. General rules, Elements of buildings, Analytical chemistry, Acoustics and acoustic measurements, Internal combustion engines, Iron and steel products, Paints and varnishes, Paint ingredients, Road engineering, Road vehicle systems, Piezoelectric and dielectric devices, Water quality, Pipeline components and pipelines, Electromechanical components for electronic and telecommunications equipment, Testing of metals, Products of the chemical industry, Paint coating equipment, Freight distribution of goods, Protective equipment, Wood-based panels, Adhesives, Shipbuilding and marine structures in general, Protection against dangerous goods, Lubricants, industrial oils and related products.

Korean Agency for Technology and Standards (KATS), Standard atmosphere for conditions and tests

KS A 0006-2014(2019) Standard atmospheric conditions for testing
KS M 3090-1994 Standard atmospheres for conditioning and testing of plastics
KS M ISO 291-2012(2022) Plastics－Standard atmospheres for conditioning and testing
KS K ISO 139:2019 Textiles — Standard atmospheres for conditioning and testing
KS R 1140-2001 Standard reference test specimens for calibratinga laboratory light exposure apparatus
KS M 3090-1994(1999) STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING OF PLASTICS
KS M ISO 187:2021 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
KS M ISO 2231-2002(2022) Rubber－or plastics－coated fabrics－Standard atmospheres for conditioning and testing
KS R ISO 10521-1:2008 Road vehicles－Road load－Part 1：Determination under reference atmospheric conditions
KS R ISO 10521-1-2008(2018) Road vehicles－Road load－Part 1：Determination under reference atmospheric conditions
KS M ISO 5024-2003(2018)
KS C IEC 60212:2002 Standard conditions for use prior to and during the testing of solid electrical insulating materials
KS M ISO 187:2016 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
KS M ISO 5024:2003 Petroleum liquids and liquefied petroleum gases-Measurement-Standard reference conditions
KS C IEC 60212:2019 Standard conditions for use prior to and during the testing of solid electrical insulating materials
KS C IEC 60642:2018 Piezoelectric ceramic resonators and resonator units for frequency control and selection — Chapter I: Standard values and conditions — Chapter II: Measuring and test conditions
KS C IEC 60642-2023 Piezoelectric Ceramic Resonators and Resonator Units for Frequency Control and Selection Chapter 1 Standard Values and Conditions Chapter 2 Measurement and Test Conditions
KS D ISO 9226:2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS C IEC 60068-3-11-2014(2019) Environmental testing — Part 3-11: Supporting documentation and guidance — Calculation of uncertainty of conditions in climatic test chambers

IEC - International Electrotechnical Commission, Standard atmosphere for conditions and tests

IEC 60160:1963 Standard Atmospheric Conditions for Test Purposes (Edition 1.0)

AT-ON, Standard atmosphere for conditions and tests

ONORM M 7610-1977 Standard atmospheres for conditioning and/or testing of materials, structural components and equipment
ONORM EN 62-1979 Glass reinforced plastics. Standard atmospheres for conditioning and testing.
ONORM M 7823 Teil.2-1982 Gas welding rods for Joint welding of unalloyed and low-alloyed steels; test to determine the suitability under manufacturing conditions

TR-TSE, Standard atmosphere for conditions and tests

TS 240-1965 STANDARD ATMOSPHERIC CONDITIONS, MOISTURE EOUILIBRUM AND DETERMINATION OF THE ATMOSPHERIC CONDITION FOR TEXTILE TESTING
TS 642-1968 STANDARD ATMOSPHERES FOR CONDITIONING AND/ OR TESTING STANDARD REFERENCE ATMOSPHERE
TS 720-1969 PLACTICS STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING

RU-GOST R, Standard atmosphere for conditions and tests

GOST R ISO 187-2012 Pulps, paper, board. Standard atmosphere for conditioning and testing. Method for monitoring the atmosphere and conditioning
GOST 10681-1975 Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST ISO 5024-2013 Petroleum liquids and liquefied petroleum gases. Measurements. Standard reference conditions
GOST R 56333-2015 Combustible natural gases. Standard conditions of measurement and calculation of physicochemical characteristics
GOST R 50532-1993 Solid electronical insulating materials. Standard conditions for use prior to and during the testing

Canadian General Standards Board （CGSB), Standard atmosphere for conditions and tests

CGSB 9.0 NO. 8-93-CAN/CGSB-1993 Methods of Testing Pulp and Paper Conditioning Paper or Paperboard for Testing in a Standard Atmosphere

Danish Standards Foundation, Standard atmosphere for conditions and tests

DS/EN 20139:1993 Textiles. Standard atmospheres for conditioning and testing
DS/EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
DS/EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
DS 927:1955 Textile testing. Sampling, standard atmosphere for testing and statistical interpretation of the test results
DS/EN 12222:1998 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
DS/EN ISO 139/A1:2011 Textiles - Standard atmospheres for conditioning and testing
DS/EN ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing
DS/ISO 3402:1992 Tobacco and tobacco products. Atmosphere for conditioning and testing
DS/ISO 187:1993 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
DS/EN ISO 2231:1996 Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing
DS/IEC TR 60904-14:2020 Photovoltaic devices – Part 14: Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions
DS/EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
DS/EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials
DS/EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
DS/EN 60068-3-11:2007 Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers

SE-SIS, Standard atmosphere for conditions and tests

SIS 02 01 21-1968 Atmospheric conditions and time for testing
SIS SS IEC 212:1982 Standard conditions for use prior to and during the testing of solid electrical insulating materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard atmosphere for conditions and tests

GB/T 10739-2002 Paper,board and pulps standard atmosphere for conditioning and testing
GB 6529-1986 Standard atmospheres for textiles conditioning and testing
GB/T 17291-1998 Petroleum liquid and gas measurement--Standard reference conditions
GB/T 10580-2015 Standard conditions for use prior to and during the testing of solid electrical insulating materials
GB/T 10580-2003 Standard conditions for use prior to and during the testing of solid insulating materials

PL-PKN, Standard atmosphere for conditions and tests

PN P04964-1993 Rubber-or plastics-coated fabrics. Standard atmospheres for conditioning and testing
PN H04637-1972 Corrosion protection Corrosion tests in natural atmospheric conditions
PN E04400-1972 Solid insulating materials Standart conditions prior and during ?he testing
PN P50067-1992 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitorting the atmosphere and conditioning of samples

CU-NC, Standard atmosphere for conditions and tests

NC 40-17-1967 Determination of standard atmosphere for the conditionig and determination of textiles physical and mechanical properties
NC 93-02-202-1987 Standards System for Environment Protection. Atmosphere. Sanitary Hygienic Requiriments: Maximun Admittable Conditions, Expulsión Mínimum Heights and Sanitary Protection Zones
NC 93-02-216-1988 Standards System for Environment Protection. Atmosphere. Determination of Sulphur Dioxide by Colorimetry

Professional Standard - Aquaculture, Standard atmosphere for conditions and tests

SC/T 5014-2002 Testing basic terms for materials of fishing gear - Standard atmosphere

German Institute for Standardization, Standard atmosphere for conditions and tests

DIN EN 12222:1997 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear; German version EN 12222:1997
DIN EN ISO 291:2008-08 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008); German version EN ISO 291:2008
DIN EN 12222:1997-10 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear; German version EN 12222:1997 / Note: To be replaced by DIN EN ISO 18454 (2016-01).
DIN EN ISO 139:2011-10 Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005 + Amd.1:2011); German version EN ISO 139:2005 + A1:2011
DIN EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008); German version EN ISO 291:2008
DIN 50014:2018-08 Standard atmospheres for conditioning and/or testing - Specifications
DIN 52455-1:2015-08 Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water or increased temperatures
DIN EN ISO 187:2023 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:2022)
DIN EN ISO 2231:1995-06 Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989); German version EN ISO 2231:1995
DIN EN 20187:1993 Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993
DIN/TS 35220:2021 Adaptation of standards to the impacts of climate change - Preconditions and implementation
DIN EN ISO 187:2023-02 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:2022); German version EN ISO 187:2022
DIN IEC 60642:1988 Piezoelectric ceramic resonators and resonator units for frequency control and selection; standard values and conditions; measuring and test conditions; identical with IEC 60642, edition 1979
DIN EN 15841:2010-04 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition; German version EN 15841:2009
DIN EN ISO 291:2006 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2005); English version of DIN EN ISO 291:2006-02
DIN IEC 60642:1988-04 Piezoelectric ceramic resonators and resonator units for frequency control and selection; standard values and conditions; measuring and test conditions; identical with IEC 60642, edition 1979
DIN EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003

CZ-CSN, Standard atmosphere for conditions and tests

CSN 64 0204-1979 Plastks. Standart tinospheres for onditioning and testing
CSN ISO 291:1993 Plastics. Stardard atmosphere for conditioning and testing
CSN 67 3008-1984 Paints and varnishes Standard conditions for conditioning and testing

NO-SN, Standard atmosphere for conditions and tests

NS 9504-1985 Plastics - Standard atmospheres for conditioning and testing
NS 4486-1983 Conditioning and testing - Standard atmospheres - Definitions
NS 4485-1983 Standard atmospheres for conditioning and/or testing - Spesifications
NS 5654-1980 Test conditions for standard lathes - Testing of the accuracy

European Committee for Standardization (CEN), Standard atmosphere for conditions and tests

CEN EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
EN ISO 291:1997 Plastics - Standard Atmospheres for Conditioning and Testing ISO 291: 1997
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
EN 12222:1997 Footwear - Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear
EN 20139:1992 Textiles; standard atmospheres for conditioning and testing (ISO 139:1973)
EN ISO 139:2005/A1:2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/AMD 1:2011)
EN 20187:1993 Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
DD ENV 13050-2000 Curtain Walling - Watertightness - Laboratory Test under Dynamic Condition of Air Pressure and Water Spray
HD 437 S1-1984 Standard conditions for use prior to and during the testing of solid electrical insulating materials

Lithuanian Standards Office , Standard atmosphere for conditions and tests

LST EN 12222-2000 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
LST EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
LST EN ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005)
LST EN 20187-2001 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
LST EN ISO 2231:2000 Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989)
LST EN 60212-2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 60212:2010)
LST EN ISO 139:2005/A1:2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/Amd.1:2011)
LST EN 15841-2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

Indonesia Standards, Standard atmosphere for conditions and tests

SNI ISO 18454:2011 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
SNI ISO 187:2011 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

AENOR, Standard atmosphere for conditions and tests

UNE-EN 12222:1997 FOOTWEAR. STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING OF FOOTWEAR AND COMPONENTS FOR FOOTWEAR.
UNE 7520:1994 STANDARD ATMOSPHERES FOR CONDITIONING AND/OR TESTING. SPECIFICATIONS.
UNE 7521:1994 CONDITIONING AND TESTING. STANDARD ATMOSPHERES. DEFINITIONS.
UNE-EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
UNE-EN ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005)
UNE-EN 20187:1994 PAPER, BOARD ANS PULPS. STANDARD ATMOSPHERE FOR CONDITIONING AND TESTING AND PROCEDURE FOR MONITORING THE ATMOSPHERE AND CONDITIONING OF SAMPLES. (ISO 187:1990).
UNE-EN ISO 2231:1996 RUBBER-OR-PLASTICS. COATED FABRICS. STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING. (ISO 2231:1989).
UNE-EN ISO 139:2005/A1:2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/AMD 1:2011)
UNE-EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition

Japanese Industrial Standards Committee (JISC), Standard atmosphere for conditions and tests

JIS S 2072:2009 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater for bathtub
JIS S 2071:2008 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater
JIS S 2074:2011 Standard use conditions, standard acceleration mode and test conditions for domestic gas combination water heating and hydronic heating appliance
JIS S 2073:2009 Standard use conditions, standard acceleration mode and test conditions for domestic direct vent type oil burning space heater
JIS K 6404-1:1999 Rubber-or plastics-coated fabrics -- Standard atmospheres for conditioning and testing
JIS K 7100:1981 Standard atmospheres for conditioning and testing of plastics
JIS Z 2383:1998 Standard specimens of metals and alloys, Determination of corrosion rate of standard specimens for the evaluation of corrosivity of atmospheres
JIS C 2142:2009 Solid electrical insulating materials -- Standard conditions for use prior to and during the testing
JIS C 2142:2016 Solid electrical insulating materials -- Standard conditions for use prior to and during the testing
JIS F 0305:2005 Shipbuilding -- Air conditioning and ventilation of wheel house on board ships -- Design condition and basis of calculations

Association Francaise de Normalisation, Standard atmosphere for conditions and tests

NF EN ISO 139:2005 Textiles - Atmosphères normales de conditionnement et d'essai
FD X15-001:1997 Standard atmospheres for conditioning and/or testing. specifications.
NF G00-003/A1*NF EN ISO 139/A1:2011 Textiles - Standard atmospheres for conditioning and testing - Amendment 1
NF G62-000*NF EN 12222:1998 Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear.
NF R10-024:1994 Road vehicles. Motor vehicle road load. Determination under reference atmospheric conditions and reproduction on chassis dynamometer.
NF C26-200*NF EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials.
NF C26-200:1973 Methods of testing insulating materials. Standard conditions for usterials.
NF A05-402:1995 Metals and alloys. Atmospheric corrosion testing. General requirements for field tests.
NF EN ISO 20768:2021 Produits de vapotage - Machine à vapoter pour analyses de contrôle - Définitions et conditions normalisées
NF X43-355*NF EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition.
NF EN IEC 61326-2-1:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 2-1 : exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et matérie...
NF X43-286:1997 Workplace atmospheres. Pumped sorbent tubes for the determination of gases and vapours. Requirements and test methods.
NF EN IEC 61326-2-2:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 2-2 : exigences particulières - Configurations d'essai, conditions de fonctionnement et critères de performance des matériels portables d'essai, ...
NF EN IEC 61326-2-4:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 2-4 : exigences particulières - Configurations d'essai, conditions de fonctionnement et critères de performance pour les contrôleurs d'isolement ...

未注明发布机构, Standard atmosphere for conditions and tests

BS EN 20139:1992 Textiles — Standard atmospheres for conditioning and testing
DIN EN ISO 291:1997 Plastics — Standard atmospheres for conditioning and testing

HU-MSZT, Standard atmosphere for conditions and tests

MSZ 20200-1968

American Society for Testing and Materials (ASTM), Standard atmosphere for conditions and tests

ASTM D86-10a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM G84-89(1999)e1 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM G84-89(2020) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM D3631-99(2007) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D3631-99(2017) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM G92-86(1997)e1 Standard Practice for Characterization of Atmospheric Test Sites
ASTM G92-20 Standard Practice for Characterization of Atmospheric Test Sites
ASTM G84-89(2012) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM D2913-96 Standard Test Method for Mercaptan Content of the Atmosphere
ASTM D3631-99 Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D2913-20 Standard Test Method for Mercaptan Content of the Atmosphere
ASTM D3631-99(2004) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM G202-12(2020) Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G202-12(2016) Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM D3631-99(2011) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D1349-14 Standard Practice for Rubbermdash;Standard Conditions for Testing
ASTM B826-09(2020) Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ASTM B826-09(2015) Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ASTM D4765-03 Standard Test Method for Fluorides in Workplace Atmospheres
ASTM D8423-22 Standard Specification for Environmental Conditions for Post-packaged Storage and Retail Merchandising of Cannabis/Hemp Flower
ASTM E2357-17 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
ASTM E1529-16 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1529-16e1 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1529-14 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ASTM B826-97 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ASTM G84-89(2005) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM E2357-23a Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
ASTM E171-94(2007) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E171-94(1998) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E171-94(2002) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E2024-05 Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
ASTM E2024-99 Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
ASTM E2357-11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM D2612-99(2005) Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests
ASTM E529-04 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM D5015-95 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5015-02 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5015-15(2022) Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D7145-05 Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
ASTM G7/G7M-13 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
ASTM D1607-91(2018)e1 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
ASTM G7/G7M-21 Standard Practice for Natural Weathering of Materials
ASTM B808-10 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM G181-11(2017) Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM E381-01(2012) Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
ASTM D8442-22 Standard Test Method for Determination of Cannabinoids in Cannabis Raw Materials and Resin Cannabis Products by Gas Chromatography and Flame Ionization Detection
ASTM D4323-84(1997)e1 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ASTM G140-96 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM D4323-84(2009) Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ASTM G140-02(2019) Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM D4323-15 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ASTM D7145-05(2015) Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
ASTM D5338-15 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
ASTM D5588-97(2017) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM D280-01(2023) Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
ASTM F1372-93(1999) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D6918-09 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D6918-09(2014)e1 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D6918-09(2022) Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM E2832-12(2017) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM D3394-16 Standard Test Methods for Sampling and Testing Electrical Insulating Board
ASTM D4778-94(1999)e1 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM D4778-15 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM F1396-93(1999) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
ASTM F1396-93(2020) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
ASTM D5482-20a Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
ASTM G140-02 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM G140-02(2008) Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM G140-02(2014) Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
ASTM F1762-14 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch
ASTM G124-18 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
ASTM D7520-16(2023) Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D4323-21 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ASTM D4600-22 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM B808-10(2020) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM D7520-16 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D3270-91(1995)e1 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM F2928-13 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
ASTM E2357-23 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
ASTM D7145-22 Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
ASTM D5482-20 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
ASTM D1282-96 Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool
ASTM D5149-95 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D5149-02 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D5015-15 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5149-02(2016) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D5149-02(2008) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM E1529-00 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1529-22 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM D6121-03a Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-03 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM E2176-08 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R_L-Rain)
ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4600-95(2010) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM D7520-09 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM E1529-06 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1529-10 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM F1396-93(2012) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
ASTM D6179-07 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
ASTM D7145-05(2010)e1 Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
ASTM G156-97 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
ASTM F1383-20 Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Intermittent Contact
ASTM F739-20 Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact
ASTM F1375-92(1999) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1529-13 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1529-14a Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E2357-18 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
ASTM E1725-95(2001) Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1725-95(2001)e1 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1725-95 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1725-08 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1725-14e1 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1725-19 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1725-14 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM F2928-18 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
ASTM D4778-05 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM D5824-98 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D5824-98(2003) Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM E2177-01 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM F739-07 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
ASTM F1383-07 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
ASTM E2320-04(2018) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
ASTM E2320-19 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
ASTM B808-97 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM B808-97(2003) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM D4413-98(2009)e1 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology)
ASTM B808-10(2015) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM D5466-15 Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology)
ASTM E2472-12(2018) Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E2472-12(2018)e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM D3267-20 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D3267-12 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM D4778-10 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM F1686-97(2003) Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
ASTM F1686-97 Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
ASTM F1686-09 Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines
ASTM F2928-18(2023) Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
ASTM D7549-23 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
ASTM E2177-11 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM E2832-12 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

International Organization for Standardization (ISO), Standard atmosphere for conditions and tests

ISO 18454:2001 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
ISO 18454:2018 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
ISO 139:2005/Amd 1:2011 Textiles - Standard atmospheres for conditioning and testing; Amendment 1
ISO 5024:1976 Petroleum liquids and gases; Measurement; Standard reference conditions
ISO 10521:1992 Motor vehicle road load; determination under reference atmospheric conditions and reproduction on chassis dynamometer

RO-ASRO, Standard atmosphere for conditions and tests

STAS 5901-1977 TEXTILES Standard atmospheres for conditioning and testing

CEN - European Committee for Standardization, Standard atmosphere for conditions and tests

EN ISO 291:2005 Plastics - Standard Atmospheres for Conditioning and Testing

Standard Association of Australia （SAA）, Standard atmosphere for conditions and tests

AS 1327:2001 Plastics - Standard atmospheres for conditioning and testing
AS 2987/A:1987(Reference Use Only)
AS 2987/B:1987(Reference Use Only)
AS 2649:2007 Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions

KR-KS, Standard atmosphere for conditions and tests

KS K ISO 139-2019 Textiles — Standard atmospheres for conditioning and testing
KS M ISO 187-2021 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
KS M ISO 5024-2003(2023)
KS M ISO 187-2016 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
KS C IEC 62670-1-2016 Photovolatic concentrators(CPV) ― Performance testing ― Part 1: Standard conditions
KS C IEC 60212-2019 Standard conditions for use prior to and during the testing of solid electrical insulating materials
KS C IEC 60642-2018 Piezoelectric ceramic resonators and resonator units for frequency control and selection — Chapter I: Standard values and conditions — Chapter II: Measuring and test conditions
KS D ISO 9226-2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity

BE-NBN, Standard atmosphere for conditions and tests

NBN T 41-006-1978 Glass-reinforced plastics - Standard atmospheres for conditioning and testing
NBN V 01-003-1974 Tobacco and tobacco products — Standard atmospheres for conditioning and testing

Instrument Society of America (ISA), Standard atmosphere for conditions and tests

ISA 71.04-1985 Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants Formerly ISA - S71.04 - 1985

TH-TISI, Standard atmosphere for conditions and tests

TIS 1794-1999 Motor vehicle road load.determination under reference atmospheric conditions and reproduction on chassis dynamometer
TIS 296-1979 Standard for atmosphere for conditioning and testing, and standard reference temperature
TIS 1643-1998 Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
TIS 285 Pt.11-1981 Standard methods of test for paints, varnishes and related materials. Part 11: Condition in container

British Standards Institution (BSI), Standard atmosphere for conditions and tests

16/30332243 DC BS EN ISO 18454. Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear
BS EN ISO 139:2005+A1:2011 Textiles. Standard atmospheres for conditioning and testing
PD IEC TR 60904-14:2020 Photovoltaic devices. Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions
BS EN 12222:1997 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
BS PD IEC TR 60904-14:2020 Photovoltaic devices. Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions
BS 2782-10 Method 1004:1977 Methods of testing plastics. Glass reinforced plastics. Standard atmospheres for conditioning and testing
BS EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials
BS EN ISO 2231:1995 Rubber- or plastics-coated fabrics. Standard atmospheres for conditioning and testing
BS EN ISO 2231:1992 Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing
BS ISO 5024:1999 Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
BS EN 15841:2009 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
BS ISO 16750-4:2023 Road vehicles. Environmental conditions and testing for electrical and electronic equipment - Climatic loads
BS EN ISO 187:2022 Tracked Changes. Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
BS ISO 16750-1:2023 Road vehicles. Environmental conditions and testing for electrical and electronic equipment. General
BS EN 13938-4:2003 Explosives for civil uses - Propellants and rocket propellants - Determination of burning rate under ambient conditions
BS ISO 16750-1:2018 Road vehicles. Environmental conditions and testing for electrical and electronic equipment - General
BS EN IEC 60749-41:2020 Semiconductor devices. Mechanical and climatic test methods. Standard reliability testing methods of non-volatile memory devices

YU-JUS, Standard atmosphere for conditions and tests

JUS N.A5.005-1979 Standard conditions for testirrg ofsolid insukting materiak

International Electrotechnical Commission (IEC), Standard atmosphere for conditions and tests

IEC 60212:1971 Standard conditions for use prior to and during the testing of solid electrical insulating materials
IEC 60212:2010 Standard conditions for use prior to and during the testing of solid electrical insulating materials
IEC TR 60904-14:2020 Photovoltaic devices - Part 14: Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions

Professional Standard - Agriculture, Standard atmosphere for conditions and tests

GB/T 10739-1989 Standard Atmospheres for Pulp, Paper, and Board Specimen Handling and Testing

American National Standards Institute （ANSI), Standard atmosphere for conditions and tests

ANSI/ISA 71.04-2013 Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants
ANSI/ASTM E1529:2013 Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ANSI/TAPPI T402 sp-2013 Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products
ASTM D6281-23 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) (Standard + Redline PDF Bundle)

Defense Logistics Agency, Standard atmosphere for conditions and tests

DLA MIL-STD-202 G CHG NOTICE 2-2013 TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS

ES-UNE, Standard atmosphere for conditions and tests

UNE-EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials (Endorsed by AENOR in October of 2011.)
UNE-EN ISO 187:2023 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:2022)

VN-TCVN, Standard atmosphere for conditions and tests

TCVN 6725-2007 Paper, board and pulps.Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

NATO - North Atlantic Treaty Organization, Standard atmosphere for conditions and tests

STANAG 2895-1990 Extreme Climatic Conditions and Derived Conditions for Use in Defining Design/Test Criteria for NATO Forces Materiel (ED 1; Amendment 1: 07/11/2002; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office w

Underwriters Laboratories (UL), Standard atmosphere for conditions and tests

UL 1784 BULLETIN-2004 UL Standard for Safety Air Leakage Tests of Door Assemblies
UL SUBJECT 2075A-2008 OUTLINE OF INVESTIGATION FOR CO Gas Test Kit for Gas and Vapor Detectors and Sensors (Issue 1)
UL 1784-1995 UL Standard for Safety Air Leakage Tests of Door Assemblies (Second Edition)
UL 3111-2-031-2001 UL Standard for Safety Hand-Held Probe Assemblies for Electrical Measurement and Test (First Edition)

European Committee for Electrotechnical Standardization（CENELEC）, Standard atmosphere for conditions and tests

EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials

API - American Petroleum Institute, Standard atmosphere for conditions and tests

API PUBL 2529-1975 Measuring@ Sampling@ testing and Base Conditions for Natural Gas Fluids (Third Edition)

VE-FONDONORMA, Standard atmosphere for conditions and tests

COVENIN 720-1974

PT-IPQ, Standard atmosphere for conditions and tests

NP EN ISO 1514:2000 Paints and varnishes Standard paneis for testing (ISO 1514:1993)
NP EN ISO 1514:1999 Paints and varnishes Standard paneis for testing (ISO 1514:1993)

Institute of Electrical and Electronics Engineers (IEEE), Standard atmosphere for conditions and tests

IEEE Std 829-2008 IEEE Standard for Software and System Test Documentation
IEEE Std 301-1988 IEEE Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing Radiation

CENELEC - European Committee for Electrotechnical Standardization, Standard atmosphere for conditions and tests

HD 437-1984 Standard Conditions for Use Prior to and During the Testing of Solid Electrical Insulating Materials