ZH
RU
ES

Chemical Composition Main Test Components

Chemical Composition Main Test Components, Total:414 items.

In the international standard classification, Chemical Composition Main Test Components involves: Non-metalliferous minerals, Glass, Terminology (principles and coordination), Ferrous metals, Ceramics, Meat, meat products and other animal produce, Analytical chemistry, Spices and condiments. Food additives, Leather technology, Photography, Testing of metals, Products of the chemical industry, Fuels, Cutting tools, Welding, brazing and soldering, Non-ferrous metals, Tea. Coffee. Cocoa, Construction materials, Environmental testing, Electrical and electronic testing, Materials for the reinforcement of composites, Farming and forestry, Metrology and measurement in general, Food products in general, Services, Soil quality. Pedology, Ferroalloys, Pipeline components and pipelines, Laboratory medicine, Energy and heat transfer engineering in general, Iron and steel products, Microbiology, Medical equipment, Rubber, Products of the textile industry, Products of non-ferrous metals, Equipment for entertainment, Sterilization and disinfection, Inorganic chemicals, Refractories, Linear and angular measurements, Surface treatment and coating, Vocabularies, Acoustics and acoustic measurements, Metalliferous minerals, Particle size analysis. Sieving, Petroleum products in general, Power transmission and distribution networks, Test conditions and procedures in general, Water quality, Dentistry, Protection against fire, Organic chemicals, Pharmaceutics, Industrial automation systems, Tobacco, tobacco products and related equipment, Semiconducting materials, Environmental protection.

Indonesia Standards, Chemical Composition Main Test Components

SNI 13-3608-1994 Test method for chemical composition main substance of xeolits
SNI 07-0308-1989 Carbon steel, Test method for composition
SNI ISO 7218:2012 Mikrobiologi bahan pangan dan pakan - Persyaratan umum dan pedoman untuk pengujian mikrobiologi

RU-GOST R, Chemical Composition Main Test Components

GOST 32362-2013 Inorganic glass and glass-crystalline materials. Determination of chemical composition. General requirements for methods of determining the content of major chemical components
GOST 938.4-1970 Leather. Method of calculation of some chemical characteristics which are not determinated directly
GOST R 59592-2021 Solid mineral fuel. Methods for determination of chemical composition of ash
GOST 28654-1990 Abrasive grains from aluminium oxide. Test methods of chemical composition
GOST 7122-1981 Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition
GOST 32439-2013 Goods of household chemistry. Method for determination of alkaline components
GOST R 51019-1997 Goods of household chemistry. Method for determination of alkaline components
GOST 7565-1981 Iron, steel and alloys. Sampling for determination of chemical composition
GOST R ISO 14284-2009 Steel and iron. Sampling and preparation of samples for determination of chemical composition
GOST R 56250-2014 Glassfiber. Silicafiber. Methods for determination of chemical composition
GOST 33850-2016 Soils. Determination of chemical composition by X-Ray fluorescence spectrometry
GOST R 54751-2011 Food common salt. Calculation method for determination (measurement) of the principal substance by saline composition
GOST 31209-2003 Containers for blood and its components. Requirements for chemical and biological safety and methods of testing
GOST EN 71-5-2014 Toys. Safety requirements. Part 5. Chemical toys (sets) other than experimental sets
GOST R 55879-2013 Solid mineral fuels. Determination of chemical composition of ash by X-Ray fluorescence
GOST EN 71-4-2014 Toys. Safety requirements. Part 4. Experimental sets for chemistry and related activities
GOST 19892-1974 Acoustics instruments for determination of physical and chemical characteristics and structures of substances. Terms and definitions
GOST R 54237-2010 Solid mineral fuels. Determination of chemical composition of ash by method of atomic emission spectrometry with inductively coupled plasma
GOST R 54237-2010(2019) Solid mineral fuels. Determination of chemical composition of ash by method of atomic emission spectrometry with inductively coupled plasma
GOST R 51746-2001 Evaluation and routine testing in medical imaging departments. Part 1. General requirements

Professional Standard - Textile, Chemical Composition Main Test Components

FZ/T 30001-1992 Systematic Quantitative Analysis Method for Main Chemical Components of Ramie

Group Standards of the People's Republic of China, Chemical Composition Main Test Components

T/GZTPA 0005-2020 Determination of the main chemical constituents in Guizhou green tea by Near-infrared diffuse reflectance spectroscopy
T/GDMES 0043-2023 Requirements for lithium battery formation and capacitance testing based on microgrid DC bus
T/YNBX 108-2023 Rapid determination of main quality components in Pu-erh ripe tea - near infrared spectroscopy
T/HZBX 062-2023 Determination method for Triamcinolone Diphenhydramine Salicylic Acid Tincture-High performance liquid chromatography

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Chemical Composition Main Test Components

GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB/T 14506.28-2010 Methods for chemical analysis of silicate rocks.Part 28:Determination of 16 major and minor elements content
GB/T 22293-2008 Ginger and its oleoresins.Determination of the main pungent components.Method using high-performance liquid chromatography
GB/T 20066-2006 Steel and iron.Sampling and preparation of samples for the determination of chemical composition
GB/T 28898-2012 Evaluation of uncertainty in chemical composition analysis for metallurgical materials
GB/T 41716-2022 Determination of main active ingredient in lacquer trees—High preformance liquid chromatography
GB/T 18340.6-2010 Organic geochemical analysis methods for geological samples.Part 6:Determination of gasoline group component.Mass spectrometry
GB/T 18340.6-2001 Organic geochemical measurements of geological samples--Method for hydrocarbon types analysis of gasoline by mass spectrometry
GB/T 18340.4-2001 Organic geochemical measurements of geological samples--Method for aromatic types analysis of gas-oils aromatic fractios by mass spectrometry
GB/T 18340.3-2001 Organic geochemical measurements of geological samples--Method for hydrocarbon types analysis of gas-oil saturates fraction by mass spectrometry

CU-NC, Chemical Composition Main Test Components

NC 04-75-1986 Material Testing. Welding. Test Specimen Preparation and Sampling Selection for Chemical Composition Determination
NC 33-42-1985 Oil and Oil Derivatives. Determination of Hydrocarbon Composition Method of Physico-Chemical Analysis
NC 12-01-13-1988 Standards System for Protection Against Corrosión. Determination of Nitrates Content in the Atmosphere. Method of Chemical Analysis

IN-BIS, Chemical Composition Main Test Components

German Institute for Standardization, Chemical Composition Main Test Components

DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
DIN 51729-10:2011-04 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray Fluorescence Analysis
DIN 52340-7:1974 Testing of glass; chemical analysis of colourless soda-lime-glass with SiO<(Index)2>, CaO, MgO and Na<(Index)2>O as main constituents, determination of TiO<(Index)2>
DIN 54387-4:2023-08 Testing of ceramic raw materials and ceramic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 4: Determination of metallic main components and trace impurities
DIN 51604-1:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 1: Testing Fluid A
DIN 51729-10:1996 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray fluorescence analysis
DIN 52340-10:1974 Testing of glass; chemical analysis of colourless soda-lime-glass with SiO<(Index)2>, CaO, MgO and Na<(Index)2>O as main constituents, determination of SO<(Index)3>
DIN 52340-2:1974 Testing of glass; chemical analysis of colourless soda-lime-glass with SiO<(Index)2>, CaO, MgO and Na<(Index)2>O as main constituents; determination of SiO<(Index)2>
DIN 51729-10:2011 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray Fluorescence Analysis
DIN EN ISO 14284:2023-04 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022); German version EN ISO 14284:2022
DIN 51604-2:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN 51729-8:2001 Solid fuels - Determination of chemical composition of fuel ash - Part 8: Determination of soda and potash (Na<(Index)2>O, K<(Index)2>O) contents
DIN 52340-1:1974 Testing of glass; chemical analysis of colourless soda-lime-glass with SiO<(Index)2>, CaO, MgO and Na<(Index)2>O as main constituents; general remarks and test report
DIN 51941-1:2008 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 28090-3:2014-11 Static gaskets for flange connections - Gaskets made from sheets - Part 3: Chemical resistance test procedures
DIN EN 1071-4:2006-05 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA); German version EN 1071-4:2006
DIN EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005
DIN EN ISO 14284:2023 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022)
DIN EN 14726:2019-06 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry; German version EN 14726:2019
DIN 51729-11:1998-11 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 11: Determination by inductively coupled plasma emission spectrometry (ICP-OES)
DIN EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008); English version of DIN EN ISO 21068-3:2008-12
DIN 51604-3:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 3: Testing Fluid C, methanol containing lower layer
DIN 51941-1:2008-01 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51941-1:1994 Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) English version of DIN EN 1071-4:2006-05
DIN EN 10318:2005-08 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005
DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN EN 14726:2019 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
DIN EN ISO 13734:2014-03 Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013); German version EN ISO 13734:2013
DIN 53436-1:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 1: Decomposition apparatus and determination of test temperature
DIN EN 14726:2018 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry; German and English version prEN 14726:2018
DIN EN 12814-8:2023-08 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements; German and English version prEN 12814-8:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN 12814-8 (2021-03).
DIN EN 12814-8:2021-03 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements; German version EN 12814-8:2021
DIN 55912-2 Bb.1:1999 Pigments - Titanium dioxide pigments; methods of analysis - Examples using the X-ray fluorescence analysis to determine minor constituents
DIN 51729-8:2001-05 Solid fuels - Determination of chemical composition of fuel ash - Part 8: Determination of soda and potash (Na<(Index)2>O, K<(Index)2>O) contents
DIN EN 15063-2:2007-01 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method; German version EN 15063-2:2006
DIN EN ISO 21068-3:2008-12 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008); German version EN ISO 21068-3:2008
DIN EN 15376:2014-12 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods; German version EN 15376:2014
DIN EN 14287:2004-09 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components; German version EN 14287:2004
DIN EN 15063-2:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method; English version of DIN EN 15063-2:2007-01

BR-ABNT, Chemical Composition Main Test Components

ABNT NBR 10181-2016 Iron-boron alloys - Determination of the chemical composition
ABNT P-MB-513-1969

Jilin Provincial Standard of the People's Republic of China, Chemical Composition Main Test Components

DB22/T 2259-2015 Determination of Main Component Content of Sika Antler Dishes

AASHTO - American Association of State Highway and Transportation Officials, Chemical Composition Main Test Components

T 219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes
T219-1987 Standard Specification for Testing Lime for Chemical Constituents and Particle Sizes (Eighteenth Edition)

Yunnan Provincial Standard of the People's Republic of China, Chemical Composition Main Test Components

DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry
DB53/T 497-2013 Guidelines for the establishment and verification of near-infrared calibration models for the main chemical constituents of tobacco and tobacco products

VN-TCVN, Chemical Composition Main Test Components

TCVN 5055-1990 Steel and iron.Sampling for the determination of chemical composition
TCVN 1811-2009 Steel and iron.Sampling and preparation of samples for the determination of chemical composition
TCVN 7572-3-2006 Aggregates for concrete and mortar.Test methods.Part 3: Guide for determination of petrographic compositions
TCVN 6624-2-2000 Water quality.Determination of nitrogen.Part 1: Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection

Professional Standard - Forestry, Chemical Composition Main Test Components

LY/T 1443-1999 Method for Determination of Chemical Components of Pine Tar Oil

Professional Standard - Chemical Industry, Chemical Composition Main Test Components

HG/T 5584～5587-2019 Terephthalic acid hydrorefining catalyst, activity test method of ruthenium-based ammonia synthesis catalyst, chemical composition analysis method of supported ammonia synthesis catalyst, and chemical composition analysis method of catalyst for hydrogenat
HG/T 2256-1991 Determination of ash content of couplers of photographic chemicals
HG/T 2256-2011 Determination of ash content of couplers of photographic chemicals
HG/T 5756～5758-2020 Analytical methods for chemical composition of catalysts for selective hydrogenation of benzene to cyclohexene, analytical methods for chemical composition of aluminum-based hydrogenation catalysts, and determination of reduction degree of catalysts for a
HG/T 2257-1991 Determination of Volatile Content in Photochemical Couplers
HG/T 2257-2011 Determination of Volatile Content in Photochemical Couplers
HG/T 5316～5319-2018 Test method for activity of ammonia cracking hydrogen production catalyst, analysis method for chemical composition of sweetening catalyst at room temperature, sulfur capacity test and chemical composition analysis method for manganese oxide desulfurizati
HG/T 5029~5030-2016 Activity test of cobalt molybdenum sulfide catalyst and chemical composition analysis method of cobalt molybdenum sulfide catalyst (2016)
HG/T 5033~5034-2016 Activity Test and Chemical Composition Analysis Method of Platinum Series Benzene Hydrogenation to Cyclohexane Catalysts (2016)
HG/T 5027~5028-2016 Catalytic performance test and chemical composition analysis method of butyraldehyde gas-phase hydrogenation to butanol catalyst (2016)
HG/T 5189~5193-2017 Analysis methods for chemical composition of organic sulfur conversion and absorption catalysts at room temperature and methanol hydrogen production catalysts, test methods for reaction performance of methanol to propylene catalysts, chemical composition
HG/T 2416-2007 Photographic chemicals.Measurement methods of the trace-sulfur in the color couples Spectrophotometric analysis menthods of molecular absorbs
HG/T 2416-1993 Determination of trace amounts of sulfur in photographic chemicals couplers Molecular absorption spectrophotometry
HG/T 5417～5420-2018 Catalyst activity test method for methanol vapor phase dehydration to dimethyl ether, manganese-based ozonolysis catalyst chemical composition analysis method and activity test method, and chemical composition analysis method for n-olefin to isobutylene c
HG/T 5579～5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique
HG/T 5031~5032-2016 Sulfur capacity test of activated carbon alkali desulfurizer at room temperature and chemical composition analysis method of activated carbon alkali desulfurizer (2016)

Professional Standard - Light Industry, Chemical Composition Main Test Components

QB/T 1272-1991 Preparation of samples for chemical analysis of finished fur products and general rules for chemical analysis

YU-JUS, Chemical Composition Main Test Components

JUS C.C1.103-1983 Aluminium master alloys. Chemical composition and requirements for delivery
JUS C.C1.005-1983 Aluminium and aluminium alloys. Blocks chemical composition and reguirements for delivery
JUS C.D2.300/1-1986 Copper and copper alloys. Copper alloys for castings. Chemical composition and quality reguirements.
JUS C.D2.300-1980 Copper and copper alloys. Copper aUoysfor castings. Chemical composition and quality requirements
JUS C.C1.103-1988 Aluminium and aluminium alloys. Aluminium and aluminium master alloys. Chemical composition and requirements for delivery
JUS C.C1.005/1-1990 Aluminium alloys forcasting. Blocks.'Chemicalcomposition andreguirements for de!!very. Amendments
JUS C.D1.005-1980 Copper and copper alloys. Copper alloys for castings. Chemical composition, designation, quality requirements
JUS H.B8.152-1985 Heavy chemlcals. Carbemide (urea) for Industrlal use. Determlnathn oflron content 2,2'-bipyr!dyl photometrlc method
JUS C.D1.005/1-1986 Copper and copper alloys. Copper alloys for castings. Chemical composition, designation, quality re-guirements. Amendments

International Organization for Standardization (ISO), Chemical Composition Main Test Components

ISO 14284:1996 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys — Standards for the determination of chemical composition
ISO 377-2:1989 Selection and preparation of samples and test pieces of wrought steels; part 2: samples for the determination of the chemical composition
ISO 14284:2022 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
ISO 49:1994/Amd 1:2018 Malleable cast iron fittings threaded to ISO 7-1 — Amendment 1: Chemical composition of the zinc coating — adjustment to actual requirements regarding hazardous substances
ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
ISO/TR 11905-2:1997 Water quality - Determination of nitrogen - Part 2: Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection
ISO/DIS 22863-13:2023 Fireworks — Test methods for determination of specific chemical substances — Part 13: Qualitative detection of metal element in firework compositions
ISO 13365:2011 Leather. Chemical tests. Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography
ISO/TS 10303-1751:2018 Industrial automation systems and integration — Product data representation and exchange — Part 1751: Application module: Test requirement allocation
ISO 12782-5:2012 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 5: Extraction of humic substances from aqueous samples

HU-MSZT, Chemical Composition Main Test Components

Association Francaise de Normalisation, Chemical Composition Main Test Components

NF IEC EN 62464-1:2019 Appareils à résonance magnétique pour imagerie médicale - Partie 1 : détermination des principaux paramètres de qualité d'image
FD A54-109*FD ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys - Standards for the determination of chemical composition
FD CEN/TR 10261:2019 Aciers et fontes - Normes européennes pour la détermination de la composition chimique
FD ISO/TR 4644:2021 Nickels, ferronickels et alliages de nickel - Normes pour la détermination de la composition chimique
NF X20-302:1974 Gas analysis by mass spectrometry. Determination of gas chemical composition.
NF T45-034*NF ISO 28641:2018 Rubber compounding ingredients - Organic chemicals - General test methods
NF EN IEC 62563-2:2021 Appareils électromédicaux - Systèmes d'imagerie médicale - Partie 2 : essais d'acceptation et de constance des systèmes d'imagerie médicale
NF EN 1071-4:2006 Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 4 : détermination de la composition chimique par microanalyse avec sonde électronique (MASE)
NF A06-383*NF EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
NF B49-423-3*NF EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3 : determination of nitrogen, oxygen and metallic and oxidic constituents.
NF EN 12814-8:2021 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 8 : exigences
NF EN ISO 21068-3:2008 Analyse chimique des matières premières et des produits réfractaires contenant du carbure de silicium - Partie 3 : dosage de l'azote, de l'oxygène et des constituants métalliques et oxydés
NF A92-801-4*NF EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4 : determination of chemical composition by electron probe microanalysis (EPMA).
NF A01-800:2018 Foundry products - Cast steels and cast irons - Sampling and sample preparation for the determination of the chemical composition
NF A01-800:1986 Foundry products. Sampling and preparation of samples for the determination of the chemical composition. Cast steel and cast iron.
NF A06-590*NF EN 14726:2019 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
NF A89-810-8:2021 Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements
NF X31-090-5*NF EN ISO 12782-5:2012 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and soil materials - Part 5 : extraction of humic substances from aqueous samples
FD D90-307*FD CEN/TR 17236:2020 Electronic cigarettes and e-liquids - Constituents to be measured in the aerosol of vaping products
NF EN 14287:2004 Aluminium et alliages d'aluminium - Exigences spécifiques pour la composition chimique de produits destinés à la fabrication d'emballages et de composants d'emballage
NF T70-337:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of secondary explosive constituents by room temperature extraction.
NF EN 61223-3-3:1997 Essais d'évaluation et de routine dans les services d'imagerie médicale - Partie 3-3 : essais d'acceptation. Performances d'imagerie des équipements à rayonnement X d'angiographie numérique soustractive (ANS).

RO-ASRO, Chemical Composition Main Test Components

STAS 2015/1-1983 CAST IRON AND STEELS Sampling for tlie determination of chemical composition
STAS 7621/1-1985 NORMAL ELECTROCORUNDUM Determination of chcmical composition
STAS 10953-1985 Metals welding SAMPLING FOR THK DETER MINATION OF CHEMICAL COMPOSITION OF DEPOSITED METAL
STAS 6200/4-1981 NATURAL STONE FOR BUILD1NGS Specifk-alions for determination of petrof?raphyic and mineralogic charac- teristics and chemica] composition
STAS E 12516/3-1988 COPPER, LEAD, ZINC, PYRITE AND COMPLEX SULPHIDE ORES Copper determination of some mineralogical components Rational analysis
STAS 6095/3-1990 Pulps SAMPLES PREPA RATION FOR PHYSICAL-MECHANICAL TESTS AND CHEMICAL ANALYSIS. LABORATORY PULP SHEETS FORMER AND DRYING

CEN - European Committee for Standardization, Chemical Composition Main Test Components

PD CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
PREN 14726-2018 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
PD CEN/TR 17236:2018 Electronic cigarettes and e-liquids - Constituents to be measured in the aerosol of vaping products

Danish Standards Foundation, Chemical Composition Main Test Components

DS/CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
DS/EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
DS 423.42:2002 Testing of concrete - Hardened concrete - Concrete composition
DS/EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
DS/EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
DS/EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
DS/EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test
DS/EN 14287:2004 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
DS/EN 15063-2:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method

European Committee for Standardization (CEN), Chemical Composition Main Test Components

PD CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
DD ENV 1071-4-1995 Advanced Technical Ceramics - Methods of Test for Ceramic Coatings - Part 4: Determination of Chemical Composition
EN ISO 14284:2022 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022)
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
PD CEN/TR 10317:2013 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
EN 71-4:1990 Safety of Toys - Part 4: Experimental Sets for Chemistry and Related Activities Incorporates Amendments A1: 04/1998; A2: 07/2003; A3: 05/2007
CEN/TR 10317:2020 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008)
PD CEN/TR 10317:2009 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization
EN 14287:2004 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
CEN/TR 17236:2018 Electronic cigarettes and e-liquids - Constituents to be measured in the aerosol of vaping products
EN 15063-1:2014 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)

American Society for Testing and Materials (ASTM), Chemical Composition Main Test Components

ASTM D2650-04 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry
ASTM D2650-10(2021) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
ASTM D2650-10(2015) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
ASTM D820-93(2016) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM E1806-96(2001) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E32-86(2006)e1 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E1806-23 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM D820-93 Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM D820-93(2003) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM D820-93(2009) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM A830/A830M-06 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM A830/A830M-11 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM E88-91(2005) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM D5774-95(2004)e1 Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables
ASTM D820-93(2023) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM A830/A830M-00 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM A830/A830M-02 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM A830/A830M-13 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM A830/A830M-14 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM A830/A830M-18 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
ASTM E1806-96(2006) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1833-07 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E255-02 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E1806-96 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1806-18 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1806-09(2016) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1833-07a(2013)e1 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E55-91(2005) Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E255-07 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
ASTM E877-13 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
ASTM D5354-95 Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
ASTM D5354-95(2006) Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
ASTM D5354-95(2020) Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
ASTM E1833-07a Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E32-21 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E1833-96(2001) Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E55-91(1996) Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E1833-96 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E32-86(1996)e1 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E255-23 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM D7807-20 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
ASTM E88-91(1996) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM E1306-07 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM D5352-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM F2259-10 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (¹H NMR) Spectroscopy
ASTM E55-11(2022)e1 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM F2259-03 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (¹H NMR) Spectroscopy
ASTM E88-91(2001) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM F418-77(2002) Standard Practice for Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements
ASTM E32-15 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E88-11 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM E55-23 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

Professional Standard - Business, Chemical Composition Main Test Components

SB/T 10404-2006 Determination of active components in waterborne preservatives and fire-retardants

GOSTR, Chemical Composition Main Test Components

GOST R 113.16.01-2020 Dust suppression and prevention of freezing with the usage of products based on calcium chloride, magnesium chloride and sodium chloride

Professional Standard - Commodity Inspection, Chemical Composition Main Test Components

SN/T 2074-2008 Protocol of the qualitative polymerase chain reaction(PCR) for detecting genetically modified component in familiar edible fungi
SN/T 3322.1-2012 Chemical analysis of limenite concentrate for import and export.Part 1:Determination of major and minor components.Wavelength dispersive X-ray fluorescence spectrometry
SN/T 2260-2010 Determination chemical compounds of copper cathode-Photoeletric emission spectroscopic method
SN/T 1599-2005 Determination of Main Components in Coal Ash by Inductively Coupled Plasma-Atomic Emission Spectrometry
SN/T 2497.2-2010 Test method of import and export dangerous chemicals-Part 2: Plaque forming cell assay
SN/T 2718-2010 Determination of chemical composition in stainless steel-Inductively coupled plasma atomic emission spectrometric method
SN/T 1112-2002 Determination of Chemical Composition in Aluminum Ingots by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES)

CZ-CSN, Chemical Composition Main Test Components

CSN 70 0637 Cast.2-1986 Glass testing methods. Chemical analysis of glass. Determination of barium oxide at presence of lead oxide. Gravimetric method
CSN 80 0207-1988 Man-made fibres. Staple and tow. Method of determination of loop tensile strength
CSN 66 8102 Cast.16-1997
CSN ISO 3310-3:1994 Test sieves. Technical requirements and testing. Part 3: Test sieves of electroformed sheets
CSN 70 0641 Cast.3-1976 Chemical análysis of glass. Determinat- ion of alkali metal oxides. Fláme photo- metric method (with the use of synthe- tic solutions)
CSN 42 0892 Cast.21-1986 Testing of sintered carbides. Chemical analysis. General requlrements

British Standards Institution (BSI), Chemical Composition Main Test Components

BS PD ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys. Standards for the determination of chemical composition
PD ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys. Standards for the determination of chemical composition
BS 6319-5:1984 Testing of resin and polymer/cement compositions for use in construction - Methods for determination of density of hardened resin compositions
BS EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
20/30406542 DC BS ISO 21869. Rubber compounding ingredients. Magnesium oxide. Methods of test
PD CEN/TR 10317:2020 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
BS EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of chemical composition by electron probe microanalysis (EPMA)
BS EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
BS EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
BS EN 10318:2005(2010) Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
18/30367586 DC BS ISO 22863-2. Fireworks. Test method of prohibited chemical components for fireworks. Part 2. Hexachlorobenzene by gas chromatography
BS EN 61223-3-2:2008 Evaluation and routine testing in medical imaging departments -Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment
BS PD CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
BS EN ISO 14284:2022 Tracked Changes. Steel and iron. Sampling and preparation of samples for the determination of chemical composition
21/30399907 DC BS EN ISO 14284. Steel and iron. Sampling and preparation of samples for the determination of chemical composition
BS EN 13565-1:2003+A1:2007 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
BS EN 14287:2004 Aluminium and aluminium alloys. Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
BS ISO 14606:2015 Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 14606:2000 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
BS ISO 14606:2001 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
22/30400349 DC BS ISO 19609-4. Traditional Chinese medicine. Quality and safety of raw materials and finished products made with raw materials - Part 4. Testing for preservatives and unwanted compounds

Professional Standard - Aerospace, Chemical Composition Main Test Components

QJ 2136.1-1991 Physical and chemical re-examination samples of metal materials stipulated chemical composition analysis samples

Anhui Provincial Standard of the People's Republic of China, Chemical Composition Main Test Components

DB34/T 2890-2017 Rapid Determination of Main Quality Components in Tea-Near Infrared Spectroscopy
DB34/T 3054-2017 Rapid Determination Method of Main Aroma Components in Luzhou-flavor Base Liquor by Near Infrared Method

Professional Standard - China Metal Association, Chemical Composition Main Test Components

CSM 01 01 01 00-2006 Guidelines for the Uncertainty Assessment of Measurement Results of Chemical Composition Analysis
CSM 01　01　01　00-2006 Guidelines for the Uncertainty Assessment of Measurement Results of Chemical Composition Analysis
CSM 01010100-2006 Guidelines for the Uncertainty Assessment of Measurement Results of Chemical Composition Analysis

PL-PKN, Chemical Composition Main Test Components

PN G04528-11-1986 Hard and brown coal and lignites Determination of chemical composition of ash Determination of phosphorus
PN C86002-1961 Gun Powder. Determination of Humidity, Hygroscopicity and Chemical Compo3ition
PN B10105-1991 Composition for thin-layer external plastering. Requirements and tests
PN H04701-06-1991 Nonferrous metals Sampling and preparation of samples for the determination of the chemical composition of silver and its alloys

Professional Standard - Non-ferrous Metal, Chemical Composition Main Test Components

YS/T 739-2010 Determination of cryolite rate and main components of electrolyte-X-ray fluorescence spectrometric analysis method

U.S. Military Regulations and Norms, Chemical Composition Main Test Components

ARMY QPL-53039-22-2004 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT
ARMY MIL-DTL-53039 B-2005 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT

Taiwan Provincial Standard of the People's Republic of China, Chemical Composition Main Test Components

CNS 15161-2008 Iron and steel - Sampling and preparation of samples for the determination of chemical composition

The American Road & Transportation Builders Association, Chemical Composition Main Test Components

AASHTO T219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes Twentieth Edition R(1999)

Korean Agency for Technology and Standards (KATS), Chemical Composition Main Test Components

KS C IEC 60068-2-67:2002 Environmental testing Part 2：Tests －Test Cy：Damp heat, steady state, accelerated test primarily intended for components
KS D ISO 14284-2003(2018) Steel and iron－Sampling and preparation of samples for the dedermination of chemical composition
KS D ISO 7525-2012(2017) Nickel－Determination of sulfur content－Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide
KS L ISO 21068-3-2012(2022) Chemical analysis of silicon-carbide-containing raw materials and refractory products－Part 3：Determination of nitrogen, oxygen and metallic and oxidic constituents
KS L ISO 21068-3:2012 Chemical analysis of silicon-carbide-containing raw materials and refractory products-Part 3:Determination of nitrogen, oxygen and metallic and oxidic constituents
KS I ISO 11905-2:2008 Water quality-Determination of nitrogen-Part 2:Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection
KS M ISO 2071-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of zinc content－Flame atomic absorption method
KS C IEC 61223-3-5:2019 Evaluation and routine testing in medical imaging departments — Part 3-5: Acceptance tests — Imaging performance of computed tomography X-ray equipment
KS C IEC 61223-2-5:2013 Evaluation and routine testing in medical imaging departments－Part 2－5：Constancy tests－Image display devices
KS M ISO 900-2003(2008) Aluminium oxide primarily used for the production of aluminium－Determination of titanium content－Diantipyrylmethane photometric method
KS C IEC 62933-5-2:2019 Electrical Energy Storage (EES) Systems — Part 5－2: Safety Requirements for grid integrated EES systems — electrochemical based systems

NL-NEN, Chemical Composition Main Test Components

NEN 3753-1980 Cheese - PJiysical and chemical test methods - Separation of fatty constituents from a sample

国家市场监督管理总局、中国国家标准化管理委员会, Chemical Composition Main Test Components

GB/T 37665-2019 Non-destructive testing for chemical compositions of ancient ceramics—PIXE analysis technique standards
GB/T 2423.7-2018 Environmental testing—Part 2：Test methods—Test Ec：Rough handling shocks，primarily for equipment—type specimens

Professional Standard - Medicine, Chemical Composition Main Test Components

YY/T 1193-2011 Folicle stimulating hormone(FSH) quantitative immunoassay kit (chemiluminescent immunoassay)
YY/T 1807-2022 Rapid non-destructive testing of main components in metal materials for dental restorations Hand-held X-ray fluorescence spectrometer method (semi-quantitative method)

IT-UNI, Chemical Composition Main Test Components

Lithuanian Standards Office , Chemical Composition Main Test Components

LST EN ISO 14284:2003 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
LST EN 1071-4-2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
LST EN 10318-2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
LST EN 50483-5-2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test
LST EN 14287-2004 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
LST EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008)
LST EN 15063-2-2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method

AENOR, Chemical Composition Main Test Components

UNE-EN ISO 14284:2008 Steel and iron. Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
UNE-EN 10318:2007 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
UNE-EN 12814-8:2002 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements.
UNE-EN 15063-2:2008 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method

Standard Association of Australia （SAA）, Chemical Composition Main Test Components

AS 2350.2:1991 Methods of testing portland and blended cements - Chemical composition of portland cement
AS 4489.5.1:1997 Test methods for limes and limestonees - Chemical composition - Quicklime and hydrated lime

国家能源局, Chemical Composition Main Test Components

NB/T 34057.6-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 6: Determination of ash content
NB/T 34057.3-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 3: Determination of moisture
NB/T 34057.7-2020 Determination of chemical composition of lignocellulosic biomass raw materials Part 7: Determination of starch
NB/T 34057.9-2020 Determination of chemical composition of lignocellulosic biomass raw materials Part 9: Determination of lipids
NB/T 34057.2-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 2: Purification of standard samples
NB/T 34057.8-2020 Determination of chemical composition of lignocellulosic biomass raw materials Part 8: Determination of protein
NB/T 10767-2021 Determination of chemical composition of lignocellulosic biomass raw materials Part 4: Determination of soluble sugars
NB/T 34057.1-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 1: Preparation of standard samples

Professional Standard - Aviation, Chemical Composition Main Test Components

HB 7266.7-1996 Analytical method for chemical composition of aluminum-lithium alloy Determination of silicon content by silicon-molybdenum blue photometry
HB 7266.2-1996 Analytical method for chemical composition of aluminum-lithium alloy Determination of lithium content by atomic absorption spectrometry
HB 7266.4-1996 Analytical methods for chemical composition of aluminum-lithium alloys Determination of iron content by atomic absorption spectrometry
HB 7266.5-1996 Analytical method of chemical composition of aluminum-lithium alloy Determination of copper content by atomic absorption spectrometry
HB 7266.6-1996 Analytical method for chemical composition of aluminum-lithium alloy Determination of magnesium content by atomic absorption spectrometry
HB 7266.3-1996 Analytical methods for chemical composition of aluminum-lithium alloys Determination of potassium and sodium content by atomic absorption spectrometry
HB 7266.8-1996 Analytical Method for Chemical Composition of Aluminum-Lithium Alloy Quercetin Spectrophotometric Determination of Dissolved Zirconium Content
HB 6731.1-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of copper content by flame atomic absorption spectrometric method
HB 6731.2-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 2:Determination of magnesium content by flame atomic absorption spectrometric method
HB 6731.3-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of zinc content by flame atomic absorption spectrometric method
HB 6731.4-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 4:Determination of lead content by flame atomic absorption spectrometric method
HB 6731.5-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 5:Determination of cadmium content by flame atomic absorption spectrometric method
HB 6731.6-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 6:Determination of iron content by flame atomic absorption spectrometric method
HB 6731.7-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 7:Determination of manganese content by flame atomic absorption spectrometric method
HB 6731.8-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 8:Determination of nickel content by flame atomic absorption spectrometric method
HB 6731.9-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 9:Determination of chrome content by flame atomic absorption spectrometric method
HB 7716.7-2002 Spectrometric analysis of titanium alloys Part 7:Determination of copper content-Flame atomic absorption spectrometric method
HB 7716.9-2002 Spectrometric analysis of titanium alloys Part 9:Determination of manganese content-Flame atomic absorption spectrometric method
HB 7716.11-2002 Spectrometric analysis of titanium alloys Part 11:Determination of iron content-Flame atomic absorption spectrometric method
HB 7716.12-2002 Spectrometric analysis of titanium alloys Part 12:Determination of silicon content-Flame atomic absorption spectrometric method
HB 7716.1-2002 Spectrometric analysis of titanium alloys Part 1:Determination of aluminum content-Flame atomic absorption spectrometric method
HB 7716.2-2002 Spectrometric analysis of titanium alloys Part 2:Determination of vanadium content-Flame atomic absorption spectrometric method
HB 7716.3-2002 Spectrometric analysis of titanium alloys Part 3:Determination of chromium content-Flame atomic absorption spectrometric method
HB 7716.4-2002 Spectrometric analysis of titanium alloys Part 4:Determination of molybdenum content-Flame atomic absorption spectrometric method
HB 7716.6-2002 Spectrometric analysis of titanium alloys Part 6:Determination of tin content-Flame atomic absorption spectrometric method
HB 7716.10-2002 Spectrometric analysis of titanium alloys Part 10:Determination of trace manganese content-Flame atomic absorption spectrometric method
HB 7716.8-2002 Spectrometric analysis of titanium alloys Part 8:Determination of trace copper content-Flame atomic absorption spectrometric method
HB 7716.5-2002 Spectrometric analysis of titanium alloys Part 5:Determination of trace molybdenum content-Flame atomic absorption spectrometric method

National Metrological Technical Specifications of the People's Republic of China, Chemical Composition Main Test Components

JJF(烟草) 5.1-2014 Guidelines for the evaluation of measurement uncertainty of related components in mainstream cigarette smoke Part 1: Hydrogen cyanide
JJF(烟草)5.1-2014 Evaluation of Uncertainty in Measurement of Cigarette Mainstream Smoke Part 1:Hydrogen Cyanide

Professional Standard - Geology, Chemical Composition Main Test Components

DZ/T 0130.3-2006 Geology and Mineral Resources Laboratory Testing Quality Management Specification Part 3: Chemical Analysis and Composition Analysis of Rock and Mineral Samples

PT-IPQ, Chemical Composition Main Test Components

NP EN 12280-1-2000 Rubber-or plastic-coated fabrics. Accelerated ageing tests Part 1:Heat ageing

Hubei Provincial Standard of the People's Republic of China, Chemical Composition Main Test Components

DB42/T 801-2012 Automatic Potentiometric Titration Method for Determination of Active Components in Chemical Disinfectants

American National Standards Institute （ANSI), Chemical Composition Main Test Components

PD CEN/TR 10261:2023 Tracked Changes. Iron and steel. European standards for the determination of chemical composition (British Standard)

ES-UNE, Chemical Composition Main Test Components

UNE-EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) (Endorsed by AENOR in April of 2006.)
UNE-EN 14726:2020 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
UNE-EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008) (Endorsed by AENOR in October of 2008.)
UNE-EN 12814-8:2022 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements

ES-AENOR, Chemical Composition Main Test Components

UNE 80-265-1988

Military Standard of the People's Republic of China-General Armament Department, Chemical Composition Main Test Components

GJB 5080-2002 Determination of the chemical composition of boron carbide-zirconium-2 combustible poison pellets used in submarine nuclear power plants

CENELEC - European Committee for Electrotechnical Standardization, Chemical Composition Main Test Components

EN 50483-5:2009 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test

UY-UNIT, Chemical Composition Main Test Components

UNIT 98-1953

CH-SNV, Chemical Composition Main Test Components

SN ISO 4014:1981 Hexagon head bolts - Product grades A and B
SN 211 605-1986 Wrought copper-aluminium alloysChemical composition and forms of wrought products

KR-KS, Chemical Composition Main Test Components

KS C IEC 61223-3-5-2019 Evaluation and routine testing in medical imaging departments — Part 3-5: Acceptance tests — Imaging performance of computed tomography X-ray equipment
KS C IEC 62933-5-2-2019 Electrical Energy Storage (EES) Systems — Part 5－2: Safety Requirements for grid integrated EES systems — electrochemical based systems

Professional Standard - Agriculture, Chemical Composition Main Test Components

KJ 201903 Rapid detection of barbiturates in health food by colloidal gold immunochromatography

未注明发布机构, Chemical Composition Main Test Components

DIN EN ISO 11608-3:2001 Pen injectors for medical use – Part 3: Finished cartridges – Requirements and test methods

International Electrotechnical Commission (IEC), Chemical Composition Main Test Components

IEC 62933-5-2:2020 Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems