ZH
RU
ES

Technical requirements and monitoring methods for continuous flue gas monitoring

Technical requirements and monitoring methods for continuous flue gas monitoring, Total:49 items.

In the international standard classification, Technical requirements and monitoring methods for continuous flue gas monitoring involves: Vocabularies, Environmental protection, Audio, video and audiovisual engineering, Special measuring equipment for use in telecommunications, Shipbuilding and marine structures in general, Road vehicle systems, Kitchen equipment, Air quality, Radiocommunications, Transport, Linear and angular measurements, Telecommunication systems, Nuclear energy engineering, Character sets and information coding, TESTING, Radiation measurements, Mobile services, Alarm and warning systems, Mining equipment.

Professional Standard - Environmental Protection, Technical requirements and monitoring methods for continuous flue gas monitoring

HJ/T 76-2001 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources
HJ/T 76-2007 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources (on trial)
HJ 76-2017 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
HJ 1013-2018 Technical requirements and detection methods for continuous monitoring system of non-methane total hydrocarbons in waste gas from stationary pollution sources
HJ 1010-2018 Technical requirements and detection methods of gas chromatography continuous monitoring system for volatile organic compounds in ambient air
HJ 654-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for SO<下标2>、NO<下标2>、O<下标3> and CO
HJ 653-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Technical Requirements and Detection Methods "No. 1 Amendment"
HJ 654-2013(XG1-2018) Ambient air gaseous pollutants (SO2, NO2, O3, CO) continuous automatic monitoring system technical requirements and detection methods "No. 1 Amendment"
HJ 1012-2018 Ambient air and stationary source emission--Specifications and test procedures for total hydrocarbons, methane and nonmethane hydrocarbons portable monitoring instrument
HJ/T 376-2007 Technical requirement and test procedures for 24 hour thermostatic automatic continuous ambient air sampler
HJ 1011-2018 Technical requirements and detection methods of portable Fourier transform infrared monitor for volatile organic compounds in ambient air and exhaust gas

Professional Standard - Radio Television Film, Technical requirements and monitoring methods for continuous flue gas monitoring

GY/T 374-2023 IPTV monitoring equipment technical requirements and measurement methods
GY/T 371-2023 Technical requirements and measurement methods for monitors used in production and broadcasting of ultra-high-definition television programs

RU-GOST R, Technical requirements and monitoring methods for continuous flue gas monitoring

GOST R 52536-2006 Automatic equipment for spectrum monitoring stations. Technical requirements and test methods
GOST R 51843-2001 Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices. General technical requirements and test methods
GOST R 52118-2003 Reference materials of nuclear materials for radiation monitors. General technical requirements and testing methods
GOST R IEC 1066-1993 Thermoluminescene dosimetry systems for personal and environmental monitoring. General technical requirements and test methods
GOST R 54460-2011 Global navigation satellite systems. System of monitoring and integrity control. General technical requirements and test methods
GOST R 54460-2011(2020) Global navigation satellite systems. System of monitoring and integrity control. General technical requirements and test methods
PNST 16-2014 Mining equipment. Multipurpose safety systems for coal mines. Monitoring system of an aerological condition of excavations. General technical requirements and test methods

International Organization for Standardization (ISO), Technical requirements and monitoring methods for continuous flue gas monitoring

ISO 23668:2022 Ships and marine technology — Marine environment protection — Continuous on-board pH monitoring method

British Standards Institution (BSI), Technical requirements and monitoring methods for continuous flue gas monitoring

BS ISO 23668:2022 Ships and marine technology - Marine environment protection. Continuous on-board pH monitoring method
21/30387771 DC BS ISO 23668. Ships and marine technology. Marine environment protection. Continuous on-board pH monitoring method

Hebei Provincial Standard of the People's Republic of China, Technical requirements and monitoring methods for continuous flue gas monitoring

DB13/T 1642.1-2012 Continuous Automatic Monitoring System of Water Pollutants Part 1: Technical Requirements and Installation Technical Specifications
DB13/T 2544-2017 Technical requirements and detection methods of grid monitoring system for air pollution prevention and control

Professional Standard - Traffic, Technical requirements and monitoring methods for continuous flue gas monitoring

JT/T 1429-2022 Technical requirement and test method of tire pressuremonitoring system for commercial vehicle

Group Standards of the People's Republic of China, Technical requirements and monitoring methods for continuous flue gas monitoring

T/CSMPTE 17-2022 Technical requirements and measurement methods for 4K/8K ultra-high definition video monitors
T/ITS 0081-2018 Technical requirements and test methods of tire pressure monitoring system for Bus
T/JSSES 7-2020 Specifications and test procedures for atmospheric ozone monitoring system of LIDAR
T/ITS 0112-2019 Technical requirements and test methods for — Driver monitoring systems of commercial vehicle
T/GDAEPI 03-2019 Stationary emission sources Continuous automatic monitoring system of volatile organic compounds (VOCs) Technical requirements for Interference Enhanced Reflection detector (IER) method

Association Francaise de Normalisation, Technical requirements and monitoring methods for continuous flue gas monitoring

NF ISO 23780-1:2023 Navires et technologie maritime - Méthode de contrôle des performances des capteurs de TRO de surveillance continue utilisés à bord des navires - Partie 1 : capteurs à la DPD

Professional Standard - Post and Telecommunication, Technical requirements and monitoring methods for continuous flue gas monitoring

YD/T 4181-2023 Electromagnetic Compatibility Requirements and Measurement Methods for Radio Monitoring Technical Facilities
YD/T 4246-2023 Technical Requirements and Test Methods for Abnormal Behavior Monitoring of Telecommunication Network and Internet Data
YD/T 2948-2015 Technical requirements and test methods of overvoltages and overcurrents resistibility for surveillance system access to the telecommunications network

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Technical requirements and monitoring methods for continuous flue gas monitoring

GB/T 30513-2014 Technical requirements and testing method of tire blow-out monitoring and controlling system for passenger car

工业和信息化部, Technical requirements and monitoring methods for continuous flue gas monitoring

YD/T 3790-2020 Technical requirements and test methods for intelligent remote video surveillance front-end equipment

GOSTR, Technical requirements and monitoring methods for continuous flue gas monitoring

GOST EN 125-2009 Flame supervision devices for gas-burning appliances. Thermo-electric types. General technical requirements and test methods
GOST 17138-1981 Equipment for monitoring fuel element ruptures in nuclear reactors of nuclear power stations. General technical requirements and test methods

Guangdong Provincial Standard of the People's Republic of China, Technical requirements and monitoring methods for continuous flue gas monitoring

DB44/T 1947-2016 Technical Requirements for Photoionization Detector (PID) Method of Continuous Automatic Monitoring System for Volatile Organic Compound Emissions from Stationary Pollution Sources

国家广播电影电视总局, Technical requirements and monitoring methods for continuous flue gas monitoring

GY/T 284-2014 Technical requirements and measurement methods for high-definition television monitors used in program production and broadcasting

Shanghai Provincial Standard of the People's Republic of China, Technical requirements and monitoring methods for continuous flue gas monitoring

DB31/T 310015-2023 Technical requirements and detection methods for automatic monitoring system of ambient air gaseous pollutants (SO2, NO2, NO, O3, CO) sensor method

Zhejiang Provincial Standard of the People's Republic of China, Technical requirements and monitoring methods for continuous flue gas monitoring

DB33/T 310015-2023 Technical requirements and detection methods for automatic monitoring system of ambient air gaseous pollutants (SO2, NO2, NO, O3, CO) sensor method

Anhui Provincial Standard of the People's Republic of China, Technical requirements and monitoring methods for continuous flue gas monitoring

DB34/T 310015-2023 Technical requirements and detection methods for automatic monitoring system of ambient air gaseous pollutants (SO2, NO2, NO, O3, CO) sensor method

Professional Standard - Public Safety Standards, Technical requirements and monitoring methods for continuous flue gas monitoring

GA/T 1539-2018 Information Security Technology Network Virus Monitoring System Security Technical Requirements and Test Evaluation Methods

German Institute for Standardization, Technical requirements and monitoring methods for continuous flue gas monitoring

DIN EN 50194-2:2007 Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requir
DIN EN 50194-2:2017 Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requir