ZH
RU
ES

Knot

Knot, Total:499 items.

In the international standard classification, Knot involves: Soil quality. Pedology, Rubber and plastics products, Products of the textile industry, Paper and board, Measurement of volume, mass, density, viscosity, Construction equipment, Mechanical testing, Wood-based panels, Structures of buildings, Petroleum products in general, Non-textile floor coverings, Valves, Surface treatment and coating, Adhesives, Refractories, Earthworks. Excavations. Foundation construction. Underground works, Electrical wires and cables, Products of the chemical industry, Construction materials, Testing of metals, Electrical accessories, Powder metallurgy, Ceramics, Footwear, Printed circuits and boards, Leather technology, Plastics, Cutting tools, Iron and steel products, Shipbuilding and marine structures in general, Gas and steam turbines. Steam engines, Vocabularies, Dentistry, Elements of buildings, Road vehicle systems, Medical equipment, Welding, brazing and soldering, Construction industry, Non-ferrous metals, Coals, Furniture, Energy and heat transfer engineering in general, Fishing and fish breeding, Non-destructive testing, Sugar. Sugar products. Starch, Graphic technology, Ferrous metals, Particle size analysis. Sieving, Fasteners, Textile fibres, Buildings, Road engineering, Milk and milk products, Earth-moving machinery, Organic chemicals, Aircraft and space vehicles in general, Fertilizers, Insulating materials, Analytical chemistry, Metrology and measurement in general, Extraction and processing of petroleum and natural gas, Transport, Passenger and cabin equipment, Seals, glands, Railway rolling stock, Cans. Tins. Tubes, Wood, sawlogs and sawn timber, Equipment for petroleum and natural gas industries, Continuous handling equipment, Semiconductor devices, Materials for aerospace construction, Pipeline components and pipelines, Rubber, Road vehicles in general, Protection of and in buildings, Paints and varnishes, Natural gas.

Standard Association of Australia （SAA）, Knot

AS 1289.6.6.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the one-dimensional consolidation properties of a soil - Standard method
AS 1289.6.2.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box
AS 1289.6.3.2:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9kg dynamic cone penetrometer test
AS 1289.6.3.3:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test
AS 1289.6.8.1:1995 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials
AS 1733:1976 Methods for the determination of grain size in metals
AS 1289.6.7.3:1999 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method using a flexible wall permeameter
AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittings - Method for determination of bond strength
AS 1289.6.1.3:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method
AS/NZS 4266.6(Int):2001 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (Internal bond strength)
AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
AS 1289.6.1.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen
AS/NZS 4266.6:2004 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (internal bond strength)
AS 1289.6.4.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore

YU-JUS, Knot

JUS U.B9.010-1981 Measurement depth of frost penetration
JUS H.N8.217-1991 Testlng of paper and paperboard. Deternlnat ion of internal bond strenght
JUS H.N8.216-1989 Testing of paper and paperboard. Determination of tenxile properties. Internal bond strength in "z" direction
JUS M.B1.066-1982 Hexagon bolts with large head for high-tensile structural bolting, productgrade B

American Society for Testing and Materials (ASTM), Knot

ASTM F904-98 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM F904-98(2003) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM D4724-99 Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
ASTM D4724-99(2005) Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
ASTM D4724-11 Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion
ASTM D1144-99 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D1144-99(2005) Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D7998-15 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
ASTM A440-75 Specification for High-Strength Structural Steel
ASTM A94-62 Specification for High Strength Structural steel
ASTM E518-09 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E518/E518M-21 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E518/E518M-22 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D1337-96 Standard Test Method for Storage Life of Adhesives by Consistency and Bond Strength
ASTM D1337-10 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM E518/E518M-10 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C952-91(1997)e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C952-12 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM F692-97(2002) Standard Test Method for Measuring Adhesion Strength of Solderable Films to Substrates
ASTM D1337-10(2016) Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D1337-04 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM C1823/C1823M-20 Standard Test Method for Shear Bond Strength of Adhered Dimension Stone
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C1072-00a Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C952-02e1 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C952-02 Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C952-02(2009) Standard Test Method for Bond Strength of Mortar to Masonry Units
ASTM C1072-19 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-12 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-22 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13e1 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-11 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C1072-13 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM F470-89(2003) Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM C321-00 Standard Test Method for Bond Strength of Chemical-Resistant Mortars
ASTM E518-00a Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C1072-05 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-05b Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072-05a Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C321-00(2005) Standard Test Method for Bond Strength of Chemical-Resistant Mortars
ASTM D1144-99(2011) Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM C321-00(2012) Standard Test Method for Bond Strength of Chemical-Resistant Mortars
ASTM D1144-99(2016) Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C633-13 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C482-02(2014) Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
ASTM D1338-99 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D1338-99(2005) Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM C482-02 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
ASTM C633-01 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C482-81(1996) Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM C633-01(2008) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM C482-20 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
ASTM C633-13(2021) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM D4796-17(2022) Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM C633-79(1999) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C1860-23b Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23ce1 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D2527-83(2001) Standard Specification for Rubber Seals-Splice Strength
ASTM D2719-89(2001)e1 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM D2719-89(2001) Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM D2719-89(2007) Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM D952-95 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D952-02 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM C1860-19a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-21 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-19 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-18 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-20 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-22 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23c Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D1335-17 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
ASTM E1502-98(2003)e1 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM E1502-16 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM D4882-05 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D5651-95a(2002) Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
ASTM D7005-03 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D5651-95a Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
ASTM D5651-95a(2008) Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
ASTM D7005-03(2008) Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D5651-21 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
ASTM D5651-13 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

FI-SFS, Knot

SFS 5446-1988

CZ-CSN, Knot

CSN 64 0721-1957
CSN 38 5573-1993 Zemní plyn STANOVEN? ROSN?HO BODU VODY KONDENZA?N?MI HYGROMETRY
CSN 65 0311-1981 Method for determination of rystallization temperature
CSN 42 0891 Cast.3-1982 Hardness test for sintered products

RU-GOST R, Knot

GOST 14217-1987 Textile floorcoverings and mashine-made carpets. Method for determination of tuft bind strength
GOST 8049-1962 Paper. Line method of sizing degree determination
GOST R 57339-2016 Masonry. Method for determination of bond strength
GOST 20287-1991 Petroleum products. Methods of test for flow point and pour point
GOST R ISO 4919-2017 Carpets. Determination of tuft withdrawal force
GOST 24992-1981 Masonry structures. Method of estimating bonding strength in masonry
GOST 14340.5-1978 Enamelled round wires. Method of bonding strength test
GOST 20841.3-1975 Silicium organic products. Method for determination of congelation temperature
GOST 24847-1981 Soils. Determination methods of seasonable depth of freezing
GOST 24992-2014 Masonry structures. Method of estimating bonding strength in masonry
GOST 17317-1988 Artifical leather. Method for determination of interlayer bonding strength
GOST 28832-1990 Materials for interlinings with thermoplastic coating. Method for determination of bonding strength
GOST 21073.1-1975 Non-ferrous metals. Determination of grain size bu comparison with microstructure scale
GOST 19194-1973 Furniture. Method for determination of detachable legs fixing strength
GOST 26824-2010 Buildings and Structures. Methods for measuring the luminance
GOST 14801-1985 Flat-head rivets (high precision). Construction and dimensions
GOST 23785.7-1989 Cord fabric. Method for determination of resistance to rubber adhesion
GOST R 54944-2012 Buildings and structures. Methods for measuring the illuminance
GOST 23785.7-1979 Cord fabric. Method for determination of the resistance to rubber adhesion
GOST R 55402-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method of determination of bond strength
GOST 14797-1985 Button-head rivets (high precision). Construction and dimensions
GOST 14800-1985 Flat-protruding head rivets (high precision). Construction and dimensions
GOST 18995.5-1973 Organic chemical products. Methods for determination of freezing point
GOST 19195-1989 Furniture. Test methods of fixture of doors with upright and horizontal axis of rotation
GOST 33211-2014 Freight wagons. Requirements to structural strength and dynamic qualities
GOST 5927-1970 Hexagon nuts (high precision). Construction and dimensions
GOST 14798-1985 90° countersunk-head rivets (high precision). Construction and dimensions
GOST 14799-1985 120° countersunk-head rivets (hign precision). Construction and dimensions
GOST 11179-1971 1;10 Taper reamers. Design and dimensions
GOST 11180-1971 1;7 Taper reamers. Design and dimensions
GOST R 55806-2013 Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements
GOST 32484.5-2013 High-strength structural bolting assemblies for preloading. Plain washers
GOST 21981-1976 Sealants. Determination method of bond strength with metal at peeling
GOST 27403-1987 Vat dyes. Determination of freezing point, centrifuging fastness and value of hydrogen ion concentration (pH)
GOST R 52644-2006 Hexagon bolts for high-strength structural bolting with large width across flats. Specifications
GOST 9136-1972 Shoes. Method for determination of heel and heeltap bond strength
GOST 32484.1-2013 High-strength structural bolting assemblies for preloading. General requirements
GOST 9135-2004 Shoes. Method for determination of total and permanent deformation of foot-toe and counter

ZA-SANS, Knot

SANS 5262:2006 Snarling twist in textile yarns
SANS 4919:1978 Carpets - Determination of tuft withdrawal force
SANS 6019:2004 Surface bond strength of particle boards
SANS 5646:1972 Determination of bond strength of rib attachment (stuck-on rib inner soles)
SANS 6016:2005 Transverse tensile (internal bond) strength of wood-based panels
SANS 5126:1975 Viscosity of binders for paints

Professional Standard - Construction Industry, Knot

JG/T 507-2016 Digital sticking strength tester
JG 3056-1999 Digital sticking strength tester
JGJ 110-2008 Testing standard for adhesive strength of tapestry brick of construction engineering
JGJ 110-1997 Standard of adhesive strength test of tapestry brick for building engineering
JGJ 110-1997（条文说明） Test standard for bonding strength of facing bricks in construction engineering
JGJ/T 110-2017 Testing standard for adhesive strength of tapestry brick of construction engineering

CU-NC, Knot

NC 41-32-9-1985 Leather. Conglomerate Determination of Humidity Content

Professional Standard - Petrochemical Industry, Knot

SH/T 0340-1992 Determination of crystallinity of NaY molecular sieve

Professional Standard - Machinery, Knot

JB/T 2205-2000 Reducing pressure valve.Face-to-face dimensions
JB/T 2205-2013 Reducing pressure valve.Face-to-face dimensions
JB/T 2203-1999 Structural length of spring type safety valve
JB/T 2766-1992 PN16.0～32.0MPa forged high pressure valve structure length
JB/T 2203-2013 Center-to-face dimensions of spring loaded safety valve

RO-ASRO, Knot

STAS SR EN 582-1995 Thermal spraying. Determination of tensile adhesive strength
STAS SR ISO 8716:1995 Commercial road vehicles - Fifth wheel coupling pins - Strength tests
STAS 11684/3-1983 THERMAL SPRAYED COATINGS, Determination of adhesive strength at tensile
STAS 11684/4-1983 THERMAL SPRAYED COATINGS Determination of adhesive strength in shear
SR 110-10-1998 Sugar. Methods of analysis. Determination of crystals size
STAS 9019-1985 DETERMINING OF THE CONVENTIONAL BOND STRENGHT OF THE METAL DEPOSITED FOR BRAZE WELDING
STAS 1709/1-1990 Freezing-thawing effeet on road works. Freezing depth in structure of the pavement. calculus specifications
STAS 11200/106-1980 GRAPHICAL SYMBOL FOR LENGHT OR END OF TEXT
STAS 10400/2-1976 Steel industrial valves CONTROL VALVESFace to face dimensions
STAS 11071/1-1988 Block diagrams of hierarchy BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOB LENGTH

British Standards Institution (BSI), Knot

BS ISO 13765-4:2006 Refractory mortars - Determination of flexural bonding strength
BS ISO 16260:2016 Paper and board. Determination of internal bond strength
BS ISO 13765-4:2004 Refractory mortars - Determination of flexural bonding strength
BS 131-5:1965 Notched bar tests - Determination of crystallinity
BS EN 1052-5:2005 Methods of test for masonry - Determination of bond strength by the bond wrench method
BS EN 13892-8:2002 Methods of test for screed materials - Determination of bond strength
BS ISO 19207:2016 Thermal spraying. Classification method of adhesive strength by indentation
BS EN 302-1:2004 Adhesives for load bearing timber structures - Test methods - Determination of bond strength in longitudinal tensile shear strength
BS EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
BS ISO 13779-4:2002 Implants for surgery - Hydroxyapatite - Determination of coating adhesion strength
BS EN ISO 29022:2013 Dentistry. Adhesion. Notched-edge shear bond strength test
12/30237063 DC BS ISO 13910. Timber structures. Strength graded timber. Test methods for structural properties
BS EN 12003:2008 Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
BS EN 12003:2008(2009) Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
BS ISO 11815:2007 Milk - Determination of total milk-clotting activity of bovine rennets
BS EN ISO 13426-1:2003 Geotextiles and geotextile-related products - Strength of internal structural junctions - Geocells
BS EN ISO 13426-1:2019 Geotextiles and geotextile-related products - Strength of internal structural junctions - Geocells
BS ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
BS EN 61033:2007 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
BS EN 61033:2006 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
BS 1932-2:1989 Testing the strength of yarns and threads from packages - Methods for determination of knot strength and loop strength
BS EN 338:2003 Structural timber - Strength classes
BS EN 338:2009 Structural timber - Strength classes
BS EN 338:2010 Structural timber. Strength classes
BS EN ISO 583:2007 Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods
BS EN 14488-4:2005 Testing sprayed concrete - Bond strength of cores by direct tension
DD 86-1-1983 Damp-proof courses. Methods of test for flexural bond strength and short term shear strength
BS EN ISO 6327:1987 Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers

International Organization for Standardization (ISO), Knot

ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength
ISO/TS 4640 Dentistry — Test methods for tensile bond strength to tooth structure
ISO 5978:1990 Rubber- or plastics-coated fabrics; determination of blocking resistance
ISO 13910:2014 Timber structures - Strength graded timber - Test methods for structural properties
ISO 15509:2019 Adhesives — Determination of the bond strength of engineering-plastic joints
ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
ISO 29022:2013 Dentistry.Adhesion.Notched-edge shear bond strength test
ISO 14916:1999 Thermal spraying - Determination of tensile adhesive strength
ISO 4996:1999 Hot-rolled steel sheet of high yield stress structural quality
ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
ISO 387:1977 Hydrometers; Principles of construction and adjustment
ISO 7060:1982 Caprolactam for industrial use; Determination of crystallizing point
ISO 583:2007 Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods
ISO 13779-4:2002 Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength
ISO 6554:1980 Flanged automatic steam traps; Face-to-face dimensions
ISO 945-4:2019 Microstructure of cast irons — Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons

AT-ON, Knot

ONORM EN 582-1994 Thermal spraying. Determination of tensile adhesive strength
ONORM B 4300-5-1994 Steel structures - Fatigue strength

Professional Standard - Water Conservancy, Knot

SL 237-036-1999 Code for test of soil - freezing temperature test

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Knot

IPC TM-650 2.4.20-1973 Terminal Bond Strength, Flexible Printed Wiring
IPC TM-650 2.4.40-1987 Inner Layer Bond Strength of Multilayer Printed Circuit Boards
IPC TM-650 2.4.21-2007 Land Bond Strength, Unsupported Component Hole Revision F
IPC TM-650 2.4.21.1-1991 Bond Strength, Surface Mount Lands Perpendicular Pull Method Revision C

PL-PKN, Knot

PN E04410-25-1986 Electroinsulating varnishes Test methods Bond strength
PN C45301-08-1993 Caprolactam. Method of test. Determination of crystalizing point

Professional Standard - Textile, Knot

FZ/T 01154-2019 Test method for bond fastness of nonwoven fabrics
FZ/T 50038-2017 Test method for bonding temperature of low melting point polyester (PET) composite fibers

Group Standards of the People's Republic of China, Knot

T/CBCSA 33-2020 Method for determination of bond strength of ceramic tiles
T/CECS 914-2021 Test standard for bond strength of facing stone in construction engineering
T/SZBX 104-2022 Structural high strength glulam

Taiwan Provincial Standard of the People's Republic of China, Knot

CNS 9205-1982 Method for Determining Density of Metal Powder Sintered Materials
CNS 4647-1983 Square Taper Washers for High Prestressed Channels
CNS 9504-1982 4
CNS 4646-1983 Square Taper Washers for High Prestressed I-Sections

SE-SIS, Knot

SIS SS-ISO 4522/2:1987 Metallic coatings - Test methods for electrodeposited silver and silver alloy coatings - Part 2: Adhesion tests
SIS SS-ISO 4524/5:1987 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 5: Adhesion tests
SIS SEN 36 01 12-1965 Joint construction of power and telecommunication lines Calculation of strength

Association Francaise de Normalisation, Knot

NF Q03-112*NF ISO 16260:2016 Paper and board - Determination of internal bond strength
NF EN 338:2016 Bois de structure - Classes de résistance
NF P12-705*NF EN 1052-5:2005 Methods of test for masonry - Part 5 : determination of bond strength by the bond wrentch method
NF S91-266*NF EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
NF P14-204-8*NF EN 13892-8:2003 Methods of test for screed materials - Part 8 : determination of bond strength.
NF X41-026*NF EN 1942:2008 Self adhesive tapes - Measurement of thickness
NF U42-681:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
NF ISO 23381:2020 Détermination de la température de désolubilisation (cristallisation) des engrais liquides
NF EN 13892-8:2003 Méthodes d'essai des matériaux pour chapes - Partie 8 : détermination de la force d'adhérence
NF EN 13868:2003 Cathéters - Méthodes d'essai de résistance à la plicature pour cathéters à simple voie et tubes à usage médical
NF C26-285*NF EN 61033:2007 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
NF P21-353:2009 Structural timber - Strength classes.
NF P21-353:1995 Structural timber. Strength classes.
NF P21-353*NF EN 338:2016 Structural timber - Strength classes
NF EN ISO 1805:2007 Filets de pêche - Détermination de la force de rupture et de la force de rupture au noeud des fils pour filets
NF T47-099*NF EN ISO 583:2007 Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods
NF H34-067:2008 Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering.
NF EN 13408:2002 Méthodes d'essai pour les mortiers de lissage et/ou d'égalisation à prise hydraulique - Détermination de la force de liaison
NF EN 13865:2017 Sols sportifs - Détermination du comportement du rebond angulaire d'une balle - Tennis
NF T76-152-1*NF EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: determination of longitudinal tensile shear strength
NF P21-395*NF EN 1912:2012 Structural Timber - Strength classes - Assignment of visual grades and species

GOSTR, Knot

GOST 24847-2017 Soils. Determination methods of seasonable depth of freezing
GOST 26824-2018 Buildings and structures. Methods for mеаsuring the luminance
GOST R 57790-2017 Timber bearing structures. Methods of strength and deformability testing

Professional Standard - Agriculture, Knot

GB 10024-1988 Test method for knot fastness of synthetic fiber fishing nets

Professional Standard - Aquaculture, Knot

SC/T 5019-1988 Test method for knot fastness of synthetic fiber fishing nets

Korean Agency for Technology and Standards (KATS), Knot

KS F 2902-2008 Test methods for bond strength of sprayed fire resistive material applied to structural members
KS D 0033-2001 Method for determination of density of metal powder sintered materials
KS D 0033-1990 Method for determination of density of metal powder sintered materials
KS D 0033-1985 Method for determination of density of metal powder sintered materials
KS F 2218-2009 Testing methods for bonding strength of wall boards adhesives
KS F 2217-2009 Testing methods for bonding strength of ceiling board adhesives
KS M 3718-2002(2012) General rules for testing methods of bonding strength of adhesives
KS F 2217-2020 Testing methods for bonding strength of ceiling board adhesives
KS F 2218-2020 Testing methods for bonding strength of wall boards adhesives
KS F 2218-1985 Testing methods for bonding strength of wall boards adhesives
KS F 2217-1985 Testing methods for bonding strength of ceiling board adhesives
KS L 1206-1997 Testing method for bond strength of ceramic tile to portland cement
KS L 1206-1997(2017) Testing method for bond strength of ceramic tile to portland cement
KS L 1206-1979 Testing method for bond strength of ceramic tile to portland cement
KS K 0742-2021 Standard test method for individual geogrid junction strength
KS K 0741-2015 Standard test method for determining the bond strength(ply adhesion) of geocomposites
KS K 0741-2011 Test method for adhesion and bonding strength of geocomposites
KS L 1206-1997(2022) Testing method for bond strength of ceramic tile to portland cement
KS M ISO 15509:2020 Adhesives — Determination of the bond strength of engineering-plastic joints
KS D 4102-1995(2010) High tensile strength carbon steel castings and low alloy steel castings for structural purposes
KS K 0741-2021 Standard test method for determining the bond strength of geocomposites
KS L 6001-2002(2017) Bonded abrasive grain sizes
KS F 2762-2016 Measurement of bond strength of products for the protection and repair of concrete structures by pull-off
KS B ISO 387:2007 Hydrometers-Principles of construction and adjustment
KS L 6513-2001(2011) Testing methods for bonded abrasive grain size
KS F 2762-2016(2021) Measurement of bond strength of products for the protection and repair of concrete structures by pull-off
KS D 0069-2002(2022) Method of determining the crystallization temperatures of amorphous metals
KS D 3781-2016 High tensile strength steel for tower structural purposes
KS D 3781-2014 High tensile strength steel for tower structural purposes
KS D 3781-1997 High tensile strength steel for tower structural purposes
KS P ISO 13779-4:2009 Implants for surgery-Hydroxyapatite-Part 4:Determination of coating adhesion strength
KS C IEC 60749-22:2020 Semiconductor devices — Mechanical and climatic test methods — Part 22: Bond strength
KS D 0069-2002(2017) Method of determining the crystallization temperatures of amorphous metals
KS F 2732-2018 Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2732-2023 Standard test method for pull-out strength to conclude compressive strength of concrete
KS F 2731-2008(2018) Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete
KS D 3780-2006 High tensile strength steel tubes for tower structural purposes
KS D 3780-2013 High tensile strength steel tubes for tower structural purposes

HU-MSZT, Knot

Society of Automotive Engineers (SAE), Knot

SAE AMS7725A-1976 TUNGSTEN ALLOY, SINTERED, HIGH DENSITY
SAE AMS7725-1957 ALLOY, SINTERED, HIGH DENSITY Tungsten Base
SAE AMS-F-7190B-2016 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725E-2016 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS-C-81562A-2018 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725B-1992 TUNGSTEN ALLOY SHAPES, SINTERED, HIGH DENSITY
SAE AMS7725F-2020 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE J368-1988 HIGH STRENGTH, QUENCHED, AND TEMPERED STRUCTURAL STEELS
SAE AMS7725D-2007 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725E-2012 Tungsten Alloy Shapes, Sintered, High Density

IFI/FASTNR - Industrial Fastener Institute, Knot

SECT E- Section E - High Strength Structural Bolting
MET CO- Commentary on High Strength Structural Bolting
COMME- Commentary on High Strength Structural Bolting

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Knot

GB/T 12221-2005 Metal valves-Face to face,end to end,center to face and center to end dimensions
GB/T 1591-2018 High strength low alloy structural steels
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB 12250-1989 Automatic steam traps—Test methods
GB/T 12250-1989 Structural length of steam trap
GB/T 16270-2009 High strength structural steel plates in the quenched and tempered condition
GB/T 17578-1998 Provisions of strength for the superstructure of bus
GB/T 2490-2007 Bonded abrasive products.Hardness grade measurement
GB/T 2490-2018 Bonded abrasive products.Hardness grade measurement
GB/T 15188.1-1994 Face-to-face,centre-to-face,end-to-end and centre-to-end dimensions of valves-Buttwelding valves
GB/T 14725-1993 Structural testing of lower limb prostheses
GB/T 11413-1989 Test method for bond strength of leather shoe heels
GB/T 28909-2012 Extra-high strength structural steel plates in the heat-treatment condition
GB/T 12221-1989 Metal valves for use in flanged pipe systems--Face-to-face and centre-to-face dimensions
GB/T 8642-2002 Thermal spraying--Determination of tensile adhesive strength
GB/T 10430-1989 Standard test method for binding strength of sintered metal friction elements
GB/T 9141-1988 Hydraulic excavators--Testing method of structure strength
GB/T 4106-1983 Determination method for secondary recrystallization temperature of tungsten wire
GB/T 15188.2-1994 Face-to-face,centre-to-face,end-to-end and centre-to-end dimensions of valves-Wafer valves
GB/T 12250-2005 Automatic steam traps.Term、Marking、Face-to-face dimensions
GB/T 11028-1999 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
GB/T 36509-2018 Requirements and testing methods of structure strength for parag lider
GB/T 15188.3-1994 Face-to-face,centre-to-face,end-to-end and centre-to-end dimensions of valves-Female screw valves
GB/T 15188.4-1994 Face-to-face,centre-to-face,end-to-end and centre-to-end dimensions of valves-Male screw valves
GB/T 3903.25-2008 Footwear.Test methods for whole shoe.Heel attachment
GB/T 26203-2010 Paper and board.Determination of internal bond strength(Scott type)
GB/T 26203-2023 Determination of internal bond strength of paper and paperboard (Scott type)
GB/T 7727.4-1987 General terminology for ships structure, strength and vibration
GB/T 9506.10-1988 Test method for firmness of getter by pressure or sinter
GB/T 11698-1989 Metal valves for use in marine flanged pipe systems--Face-to-face and centre-to-face dimensions
GB 17578-2013 Requirements and test methods of strength for the superstructure of bus
GB 7727.4-1987 General terms for ships Hull structure, strength and vibration
GB/T 11698-2008 Metal valves for use in marine flanged pipe systems.Face-to-face and center-to-face dimensions
GB/T 42674-2023 Optical Functional Thin Film Microstructure Thickness Test Method
GB 23101.4-2008 Implants for surgery.Hydroxyapatite.Part 4:Determination of coating adhesion strength
GB/T 1230-1991 High strength plain washers for steel structures
GB/T 1230-2006 High strength plain washers for steel structures
GB/T 41852-2022 Semiconductor devices—Micro-electromechanical devices—Bend-and shear-type test methods of measuring adhesive strength for MEMS structures
GB/T 16270-1996 High-strength structural steel plates and strips: products supplied in the heat-treated or controlled rolled condition

工业和信息化部, Knot

QB/T 5558-2020 Internal bonding strength meter (Scott type)
SH/T 1827-2019 Determination of crystallinity of plastics by X-ray diffraction method
HG/T 5307-2018 Test method for bonding strength of children's rubber shoe decorative fasteners
QB/T 5655-2021 Test method for bonding strength of decorative accessories for footwear

BELST, Knot

STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs

Professional Standard - Light Industry, Knot

QB/T 1547-2016 Test method for sintering temperature range of ceramic material
QB/T 1547-1992 Method for determination of sintering temperature range of ceramic materials

German Institute for Standardization, Knot

DIN 52366:1996 Particle boards - Determination of internal bond of layers of extruded boards
DIN ISO 16260:2017 Paper and board - Determination of internal bond strength (ISO 16260:2016)
DIN EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006); English version of DIN EN ISO 1805:2007-02
DIN 54461:2021 Structural adhesives - Testing of adhesive bonds - Bending peel test
DIN 54461:2005 Structural adhesives - Testing of adhesive bonds - Bending peel test
DIN 13990:2017 Dentistry - Test methods for shear bond strength of adhesives for orthodontic attachments
DIN EN 13892-8:2003 Methods of test for screed materials - Part 8: Determination of bond strength; German version EN 13892-8:2002
DIN EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method; German version EN 1052-5:2005
DIN EN 61033:2007 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate (IEC 61033:1991 + A1:2006); German version EN 61033:2006
DIN EN 1052-5:2005-06 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method; German version EN 1052-5:2005
DIN EN 1942:2008 Self adhesive tapes - Measurement of Thickness; English version of DIN EN 1942:2008-06
DIN EN 15421:2008 Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering; English version of DIN EN 15421:2008-02
DIN EN 14488-4:2008-08 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005+A1:2008
DIN EN 13892-8:2003-02 Methods of test for screed materials - Part 8: Determination of bond strength; German version EN 13892-8:2002
DIN EN 1773:1997 Textiles - Fabrics - Determination of width and length; German version EN 1773:1996
DIN EN 338:2016-07 Structural timber - Strength classes; German version EN 338:2016

Danish Standards Foundation, Knot

DS 2082:1980 Steel for reinforced concrete. Test of bond ability
DS/ISO 1392:1986 Determination of crystallizing point — General method
DS/EN 1052-5:2005 Methods of test for masonry - Part 5: Determinaton of bond strength by the bond wrench method
DS/IEC 1033:1994 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
DS/EN 338:2009 Structural timber - Strength classes

American National Standards Institute （ANSI), Knot

ANSI/EIA 364-79:2009 Insert Bond Strength Test Procedure for Electrical Connectors
ANSI/SAE J368-1993 High Strength, Quenched, and Tempered Structural Steels
ANSI/ASTM D4882:2005 Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted Coil Test
ANSI/ASTM D2519:2007 Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

KR-KS, Knot

KS L 6001-2022 Bonded abrasive grain sizes
KS M ISO 15509-2020 Adhesives — Determination of the bond strength of engineering-plastic joints
KS F 2902-2008(2023) Test methods for bond strength of sprayed fire resistive material applied to structural members
KS F 2732-2018(2023) Standard test method for pull-out strength to conclude compressive strength of concrete
KS C IEC 60749-22-2020 Semiconductor devices — Mechanical and climatic test methods — Part 22: Bond strength

VN-TCVN, Knot

TCVN 4838-1989 Sugar.Method of Granulometric structure determination
TCVN 4645-1988 Sintered materials.Determination of hardness

Professional Standard-Ships, Knot

CB/T 4214-2013 A type face-to-face and end-to-end dimensions of valves
CB/T 3794-1997 Test methods for piezoelectric ceramics electrode joint strength

IN-BIS, Knot

IS 6623-1985

Liaoning Provincial Standard of the People's Republic of China, Knot

DB21/T 2630-2016 Determination of Crystalline Granularity of Fused Magnesium

TR-TSE, Knot

TS 3443-1980 TEST METHOD FOR BOND STRENGTH OF MORTAR TO MASONRY UNITS

SAE - SAE International, Knot

SAE AMS7725B-1987 Tungsten Alloy Shapes@ Sintered@ High Density
SAE AMS7725C-2000 Tungsten Alloy Shapes@ Sintered@ High Density
SAE J368-1993 HIGH STRENGTH, QUENCHED, AND TEMPERED STRUCTURAL STEELS
SAE J368-1968 High Strength@ Quenched@ and Tempered Structural Steels

Japanese Industrial Standards Committee (JISC), Knot

JIS T 0111:1992 General rules for structural testing of lower limb prostheses
JIS Z 8841:1993 Granules and agglomerates -- Test methods for strength
JIS L 1021-8:2007 Textile floor coverings -- Part 8: Determination of tuft withdrawal force
JIS G 0551:1998 Methods of austenite grain size determination for steel
JIS G 0552:1998 Methods of ferrite grain determination test for steel
JIS G 0551:1977 Methods of austenite grain size test for steel
JIS G 0552:1977 Methods of ferrite grain size test for steel
JIS H 7151:1991 Method of determining the crystallization temperatures of amorphous metals

International Electrotechnical Commission (IEC), Knot

IEC 60699:1981 Test method of the evaluation of bond strength of impregnating varnishes by the wire bundle test
IEC 61033:1991 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate

Professional Standard - Ferrous Metallurgy, Knot

YB/T 5123-1993 Test method for cold rupture bonding strength of refractory mortar
YB/T 5163-1993 Test method for hot rupture bonding strength of refractory mortar
YB/T 5124-1993 Test method for cold shear bond strength of refractory mud

Hebei Provincial Standard of the People's Republic of China, Knot

DB13/T 2767-2018 Determination method of slagging property of raw coal for gasification - Sintering temperature method
DB13/T 1629-2012 Specifications for high-strength structural adhesives for automobiles

Professional Standard - Non-ferrous Metal, Knot

YS/T 785-2012 Determination of relative crystallinity of zeolite sodium A by X-ray diffraction
YS/T 516-2012 Determination method for secondary recrystallization temperature of tungsten wire
YS/T 516-2006 Measuring method of secondary recrystallization temperature of tungsten wire

Professional Standard - Energy, Knot

NB/T 11255-2023 Determination of crystallinity of lignocellulosic biomass raw materials
NB/SH/T 6024-2021 Determination of Relative Crystallinity of ZSM-5 Molecular Sieve X-ray Diffraction Method

未注明发布机构, Knot

BS 131-5:1965(1999) Methods for Notched bar tests — Part 5 : Determination ofcrystallinity
BS ISO 16260:2016(2018) Paper and board — Determination of internal bond strength
GJB/Z 177-2015 Calculation method of structural strength of ship docking hull
DIN EN 338:1996 Structural timber — Strength classes

Professional Standard - Civil Aviation, Knot

MH/T 3027-2013 Test method for adhesion or cohesion strength of thermal spray coatings

National Metrological Verification Regulations of the People's Republic of China, Knot

JJG 1183-2021 Structure height gauges for Railway Frogs

Professional Standard - Aerospace, Knot

QJ 646-1982 Aerospace Vehicle Structural Strength Terminology
QJ 479-1990 Test method for bonding strength of metal coatings
QJ 1919-1990 Code for Design of Ballistic Missile Body Structure Strength and Rigidity

ACI - American Concrete Institute, Knot

ACI SP-86-1985 Deflections of Concrete Structures
ACI 214.4R-2010 Guide for Obtaining Cores and Interpreting Compressive Strength Results
ACI 214.4R-2003 Guide for Obtaining Cores and Interpreting Compressive Strength Results
ACI SP-203-2001 Code Provisions for Deflection Control in Concrete Structures
ACI 435R-1995 Control of Deflection in Concrete Structures

VE-FONDONORMA, Knot

NORVEN 55-4-1962

European Committee for Standardization (CEN), Knot

EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
EN 13892-8:2002 Methods of test for screed materials - Part 8: Determination of bond strength
EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
EN 1942:2008 Self adhesive tapes - Measurement of Thickness
EN 1942:1996 Self Adhesive Tapes - Measurement of Thickness
EN 1942:2003 Self Adhesive Tapes - Measurement of Thickness
EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
EN 338:2016 Structural timber - Strength classes
EN 338:2003 Structural Timber - Strength Classes
EN 338:2009 Structural timber - Strength classes
EN 338:1995 Structural Timber - Strength Classes
EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Knot

ASHRAE 4622-2003 Moisture Sensor Technology - A Summary of Techniques for Measuring Moisture Levels in Building Envelopes

NL-NEN, Knot

NEN-EN 582-1994 Thermal spraying.Determination of adhesive tensile strength
NEN 6720-1991 Regulations for concrete Structural requirements and calculation methods

Professional Standard - Aviation, Knot

HB 6502-2002 General requirements of rigidity test for aircraft structure
HB 5476-1991 Test method for bonding strength of thermal spray coatings
HB 7751-2004 Testing method for the bonding strength for the coating made by detonation-gun spraying
HB 5267-1983 Method for determination of bond strength between vulcanized rubber film adhesive layer and fabric for aviation

国家市场监督管理总局、中国国家标准化管理委员会, Knot

GB/T 39685-2020 Test method for determining bonding strength of ceramic coatings
GB/T 40538-2021 Structural stiffness control requirements of space vehicle
GB/T 39163-2020 Test methods of the bonding strength for target-backing plate assemblies
GB/T 3903.25-2021 Footwear—Test methods for whole shoe—Heel attachment
GB/T 36171-2018 High strength structural steel plate in the quenched and tempered condition with improved formability

IPC - Association Connecting Electronics Industries, Knot

IPC TM-650 2.4.21E-2004 Land Bond Strength@ Unsupported Component Hole
IPC TM-650 2.4.21F-2007 Land Bond Strength@ Unsupported Component Hole
IPC TM-650 2.4.21D-1997 Land Bond Strength@ Unsupported Component Hole

Military Standard of the People's Republic of China-General Armament Department, Knot

GJB 67.11A-2008 Military airplane structural strength specincation.Part 11: Structure Survivability
GJB/Z 204-2001 Calculation method of strength of surface ship launching structure
GJB/Z 203-2001 Calculation method of structural strength of ship docking hull
GJB 67.1A-2008 Military airplane structural strength specification.Part 1: General specigcation

CEN - European Committee for Standardization, Knot

PREN 14544-2002 Timber structures - Strength graded structural timber with round cross-section - Requirements

Lithuanian Standards Office , Knot

LST EN 1052-5-2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
LST EN 338-2010 Structural timber - Strength classes

AENOR, Knot

UNE-EN 1052-5:2006 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method

AIA/NAS - Aerospace Industries Association of America Inc., Knot

NASM20605-1998 Rivet@ Blind@ Nonstructural@ 100 Degrees Flush Head@ Class 2
NASM20605-2000 Rivet@ Blind@ Nonstructural@ 100 Degree Flush Head (Rev 1)

Professional Standard - China Metal Association, Knot

CSM 01 01 01 02-2006 Specification for Uncertainty Evaluation of Measurement Results by Spectrophotometry
CSM 01010102-2006 Specification for Uncertainty Evaluation of Measurement Results by Spectrophotometry
CSM　01　01　02　07-2006 Uncertainty Evaluation of Measuring Result of Metal Brinell Hardness Test
CSM 01 01 02 07-2006 Uncertainty Evaluation of Measuring Result of Metal Brinell Hardness Test
CSM 01 01 02 08-2006 Uncertainty Evaluation of Measuring Result of Metal Vickers Hardness Test
CSM 01 01 02 09-2006 Uncertainty Evaluation of Measuring Result of Metal Leeb Hardness Test
CSM 01010207-2006 Uncertainty Evaluation of Measuring Result of Metal Brinell Hardness Test

Professional Standard - Petroleum, Knot

SY/T 5724-2008 Design for casing string structure and strength
SY 5724-2008 Casing string structure and strength design
SY/T 6875-2012 Buckling strength of plated structures
SY 6875-2012 Buckling strength of plate structure

国家铁路局, Knot

TB/T 3451-2016 Structural strength design and testing of EMU car body

Canadian General Standards Board （CGSB), Knot

CGSB 4.2 NO. 77.1-94-CAN/CGSB-1994 Methodes Pour Epreuves Textiles Tapis-Moquettes - Determination De La Force D'Arrachement De Touffes ISO 4919: 1978

ES-UNE, Knot

UNE-EN 338:2016 Structural timber - Strength classes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Knot

GB/T 23101.4-2008 Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength