ZH
RU
ES

Pretreatment group

Pretreatment group, Total:499 items.

In the international standard classification, Pretreatment group involves: Surface treatment and coating, Terminology (principles and coordination), Software development and system documentation, Jewellery, Ferrous metals, Paint coating processes, Freight distribution of goods, Water quality, Test conditions and procedures in general, Microbiology, Iron and steel products, Coatings and related processes used in aerospace industry, Materials for aerospace construction, Quality, Processes of the textile industry, Analytical chemistry, Products of the chemical industry, Sterilization and disinfection, Tobacco, tobacco products and related equipment, Geology. Meteorology. Hydrology, Medical sciences and health care facilities in general, Beverages, General methods of tests and analysis for food products, Processes in the food industry, Milk and milk products, Insulating materials, Electrical wires and cables, Fasteners for aerospace construction, Adhesives, Interface and interconnection equipment, Construction materials, Structures of buildings, Environmental protection, Occupational safety. Industrial hygiene, Wood, sawlogs and sawn timber, Fertilizers, Powder metallurgy, Semiconductor devices, Shipbuilding and marine structures in general, Languages used in information technology, Applications of information technology, Textile machinery, Farming and forestry, Wood technology processes.


International Federation of Trucks and Engines, Pretreatment group

IAEA - International Atomic Energy Agency, Pretreatment group

  • WS-G-2.6-2003 Predisposal Management of High Level Radioactive Waste
  • WS-G-2.5-2003 Predisposal Management of Low and Intermediate Level Radioactive Waste
  • GSR PART 5-2009 PREDISPOSAL MANAGEMENT OF RADIOACTIVE WASTE
  • WS-R-2-2000 Predisposal Management of Radioactive Waste@ Including Decommissioning
  • GSG-3-2013 The Safety Case and Safety Assessment for the Predisposal Management of Radioactive Waste

ZA-SANS, Pretreatment group

工业和信息化部/国家能源局, Pretreatment group

Group Standards of the People's Republic of China, Pretreatment group

  • T/CIPR 039-2022 Pretreatment method of spray coating for aluminum profile
  • T/CIPR 0015-2022 Pretreatment method of spray coating for aluminum profile
  • T/CSRA 19-2022 Plastic composition test pretreatment method
  • T/CKIA 3.1-2019 Knitted fabric open width continuous wet processing technology part 1: pretreatment
  • T/CTES 1008-2018 Tea Saponin Compound Auxiliary for Textile Pretreatment
  • T/CPMA 001-2018 Technical specification of data processing for large population-based cohort study
  • T/CBIA 005-2019 Detection of microorganisms in beverages (membrane pretreatment method)
  • T/CEACI A0001-2022 Occupational skill level standard for pre-processing of food testing
  • T/CAQI 22-2016 Biological-enhanced pretreatment of wastewater—High-efficiency catalytic reactor
  • T/GRM 048-2022 Determination of Mercury in Source Rock
  • T/CIMA 0009-2019 Automatic pretreatment instrument for rapid detection of malachite green in aquatic products
  • T/NAIA 080-2021 Ammonium molybdate spectrophotometric method for measuring total phosphorus in rivers with many sediments

SSPC - The Society for Protective Coatings, Pretreatment group

  • CHAPTER 3.1-1993 Special Pre-Paint Treatments: Phosphating
  • SP 12-2002 Surface Preparation and Cleaning of Cleaning of Metals by Waterjetting Prior to Recoating (NACE NO. 5: 2002)

Professional Standard - Nuclear Industry, Pretreatment group

  • EJ/T 20157-2018 αWaste pre-disposal management requirements
  • EJ/T 20012-2012 Technical regulations on pre-disposal management of high-level radioactive waste

Taiwan Provincial Standard of the People's Republic of China, Pretreatment group

  • CNS 12644-1989 Information Processing-Program Flow for Processing Sequential Files in Terms of Record Groups
  • CNS 13190-2004 Packaging－Complete, filled transport packages and unit loads－Conditioning for testing

CZ-CSN, Pretreatment group

  • CSN 03 8220-1964 Principles o? surface treatment before painting
  • CSN 03 8221-1988 Corrosion protection. Steel products. Methods of suríace treatment before painting
  • CSN EN 84-1994 Wood preservatives.Accelerated ageing of treated wood prior to biological testing.Leaching procedure
  • CSN 73 6704-1966 Sewerage systém u?ed ío treat the sewage from small urban imits and from small groups of dispersed habitable buildings
  • CSN EN 73-1994 Wood preservatives; accelerated ageing of treated wood prior to biological testing; evaporative ageing procedure

Guangdong Provincial Standard of the People's Republic of China, Pretreatment group

  • DB44/T 482-2008 Technical specifications for Chinese cultured pearl processing pretreatment

Professional Standard - Petroleum, Pretreatment group

  • SY/T 0407-2012 Specification of steel surface preparation before application of paint
  • SY 0407-2012 Specifications for steel surface treatment before painting
  • SY/T 0407-1997 Specification of steel surface preparation before application of paint
  • SY/T 6591-2004 Technical Regulations for Prestack Depth Migration Processing of Seismic Data

Japanese Industrial Standards Committee (JISC), Pretreatment group

  • JIS Z 0203:1987 Conditioning of packaged freights for testing
  • JIS Z 0313:1998 Tests and assessment of abrasive blast-cleaned substrates before application of paints and related products

Hebei Provincial Standard of the People's Republic of China, Pretreatment group

Professional Standard - Aerospace, Pretreatment group

  • QJ 3196-2004 Pre-weld preparation and post-weld treatment requirements
  • QJ 1848-1990 Treatment method of electroforming core mold before and after electroforming
  • QJ/Z 66-1979 Production instructions for pre-plating treatment of stainless steel parts
  • QJ 2325-1992 Pre-processing of document-type database in aerospace information system

水利部, Pretreatment group

  • SL 391-2007 Sample preparation methods for organic analysis
  • SL/T 466-2020 Ice sampling and pre-processing procedures during the freeze period

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pretreatment group

  • GB/T 18839.1-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles
  • GB/T 18839.2-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning
  • GB/T 4883-2008 Statistical interpretation of data.Detection and treatment of outliers in the normal sample
  • GB/T 8056-2008 Statistical interpretation of data.Detection and treatment of outliers in the sample from exponential distribution
  • GB/T 18839.3-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning
  • GB/T 28894-2012 Surface chemical analysis.Handing of specimens prior to analysis
  • GB/T 30744-2014 The technology specification for the pre-treatment of deep-sea microorganism samples
  • GB/T 6380-2008 Statistical interpretation of data.Detection and treatment of outliers in the sample from typeⅠ extreme value distribution
  • GB/T 6807-2001 Specifications for phosphating treatment of iron and steel parts before painting
  • GB/T 27652-2011 Methods of pretreatment for chemical analysis of preservative-treated wood
  • GB 15193.21-2014 National food safety standard test substance test pretreatment method
  • GB/T 21526-2008 Structural adhesives.Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
  • GB/T 17849-1999 Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives
  • GB/T 15440-1995 Guidelines for preparing samples for genetoxicity testing of organic pollutants in environment
  • GB 7692-1999 Safety code for painting--Safety、ventilation and air clean-up for pretreatment process of painting
  • GB 7692-2012 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting
  • GB/T 8923.4-2013 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 4:Initial surface conditions,preparation grades and flash rust grades in connection with high-pressure water jetting
  • GB/T 18570.4-2001 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application
  • GB/T 17850.3-1999 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--Copper refinery slag
  • GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification
  • GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introduction and classification
  • GB/T 19816.1-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 1:Sampling
  • GB/T 18838.5-2015 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 5:Steel cut wire shot
  • GB/T 8923.3-2009 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 3:Preparation grades of welds,edges and other areas with surface imperfections
  • GB/T 18838.4-2008 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 4:Low-carbon cast-steel shot
  • GB/T 19816.3-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 3:Determination of hardness
  • GB/T 17850.6-2011 Preparation of steel substrates before application of paints and related products.Specifications for non-metallic blast-cleaning abrasives.Part 6:Iron furnace slag
  • GB/T 19816.7-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 7:Determination of moisture
  • GB/T 42658.4-2023 Guidelines for Sample Handling, Preparation, and Mounting for Surface Chemistry Analysis Part 4: Reporting Information Related to Origin, Preparation, Handling, and Mounting of Nanoobjects Prior to Surface Analysis
  • GB/T 18838.3-2008 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 3:High-carbon cast-steel shot and grit
  • GB/T 19816.6-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 6:Determination of foreign matter
  • GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 4:Determination of apparent density
  • GB/T 17850.11-2011 Preparation of steel substrates before application of paints and related products.Specifications for non-metallic blast-cleaning abrasives.Part 11: Special type grit of steel slag
  • GB/T 18570.3-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
  • GB/T 8923.2-2008 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 2:Preparation grades of previously coated steel substrates after localized removal of previous coatings
  • GB/T 18570.2-2001 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces
  • GB/T 19816.2-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 2:Determination of particle size distribution
  • GB/T 18570.5-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 5:Measurement of chloride on surfaces prepared for painting (ion detection tube method)
  • GB/T 18570.2-2009 Preparation of steel substrates before application of paints and related products.Tests for the assesssment of surface cleanliness.Part 2:Laboratory determination of chloride on cleaned surfaces

国家市场监督管理总局、中国国家标准化管理委员会, Pretreatment group

  • GB/T 39303-2020 General technical specification for pre-treatment of microorganism samples in wastewater treatment system
  • GB/T 6380-2019 Statistical interpretation of data—Detection and treatment of outliers in the sample from typeⅠextreme value distribution
  • GB/T 39304-2020 General technical specification for sample pre-treatment of biological toxicity detection in reclaimed water
  • GB/T 37561-2019 Standard practice for de-agglomeration of refractory metal powders and their compounds prior to particle size analysis
  • GB/T 17850.9-2021 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite

Society of Automotive Engineers (SAE), Pretreatment group

  • SAE AMS2420D-2002 Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
  • SAE AMS3175A-2011 Non-Chromated Surface Pretreatment Prior to Painting
  • SAE AMS3175-2008 Non-Chromated Surface Pretreatment Prior to Painting
  • SAE AS7482-2011 STUDS, STEEL, CORROSION AND HEAT RESISTANT 1800°F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
  • SAE AS7479A-2006 Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
  • SAE AS7479B-2012 Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
  • SAE AS7479E-2021 Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
  • SAE AS7479B-2008 Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
  • SAE AMS4534B-2003 Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT) UNS C17200
  • SAE AMS4050D-1991 ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451, formerly -T73651) Solution Heat Treated, Stress Relieved, and Overaged
  • SAE AS7479-1995 BOLTS AND SCREWS, STEEL, CORROSION AND HEAT RESISTANT 1650°F SOLUTION HEAT TREATED PRECIPITATION HEAT TREATED BEFORE ROLL THREADED
  • SAE AMS4534D-2019 Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
  • SAE AMS4534B-2012 Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
  • SAE AMS4534E-2021 Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT) (UNS C17200)
  • SAE AMS4218H-2001 Aluminum Alloy Castings 7.0Si 0.35Mg (A356.0-T6P) (Formerly T61P Temper) Solution and Precipitation Heat Treated
  • SAE AMS4535C-2003 Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT) UNS C17200
  • SAE AMS4535C-2012 Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
  • SAE AMS4535E-2022 Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
  • SAE AMS4218H-2006 Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0-T6P) (Formerly T61P Temper) Solution and Precipitation Heat Treated
  • SAE AMS4218J-2015 Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0-T6) (Formerly T6P Temper) Solution and Precipitation Heat Treated
  • SAE AS7482A-1996 Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 130 ksi 1800 degrees F Solution Heat Treated, Aged Before Roll Threading Procurement Specification
  • SAE AMS4533B-2003 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
  • SAE AMS4535D-2015 Copper-Beryllium Alloy@ Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ formerly AT) (UNS C17200)
  • SAE AMS4107C-2011 ALUMINUM ALLOY DIE FORGINGS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74) (Formerly -T736) Solution Heat Treated and Overaged
  • SAE AS7482C-2021 Studs, Steel, UNS S66286 Tensile Strength 130 ksi 1800 °F Solution Heat Treated, Aged Before Roll Threading Procurement Specification
  • SAE AS7477A-1995 BOLTS AND SCREWS, STEEL, CORROSION AND HEAT RESISTANT 1800 °F Solution Heat Treated, Aged Before Roll Threaded Procurement Specification For
  • SAE AMS4108D-2011 ALUMINUM ALLOY HAND FORGINGS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) (formerly -T73652) Solution Heat Treated, Compression Stress-Relieved, and Overaged

GM Holden Ltd, Pretreatment group

International Organization for Standardization (ISO), Pretreatment group

  • ISO 18117:2009 Surface chemical analysis - Handling of specimens prior to analysis
  • ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
  • ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
  • ISO 17212:2012 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
  • ISO 17212:2004 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
  • ISO/CD 20579-1:2023 Surface chemical analysis — Sample handling, preparation and mounting — Part 1: Documenting and reporting the handling of specimens prior to analysis
  • ISO/DIS 20579-1:2023 Surface chemical analysis — Sample handling, preparation and mounting — Part 1: Documenting and reporting the handling of specimens prior to analysis
  • ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning
  • ISO 8502-3:1992 Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
  • ISO 98:1977 Textile machinery and accessories; Spinning preparatory and spinning machinery; Covering characteristics of top rollers
  • ISO 8502-4:1993 Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application
  • ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
  • ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling
  • ISO 11111-2:2005/Amd 1:2009 Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines; Amendment 1
  • ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
  • ISO 11127-1:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling
  • ISO 8504-2:2019 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
  • ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
  • ISO 8501-3:2001 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections
  • ISO 20579-4:2018 Surface chemical analysis - Guidelines to sample handling, preparation and mounting - Part 4: Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis
  • ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
  • ISO 8613-1:1989 Information processing; text and office systems; Office Document Architecture (ODA) and interchange format; part 1: introduction and general principles
  • ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag
  • ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness
  • ISO 11126-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag
  • ISO 11125-3:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness
  • ISO 8504-1:2019 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles
  • ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag
  • ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag
  • ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag
  • ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand
  • ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
  • ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot
  • ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit
  • ISO 11126-6:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags
  • ISO 11124-2:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit
  • ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot
  • ISO 11126-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
  • ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine
  • ISO 11126-5:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag
  • ISO 11125-7:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture
  • ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture
  • ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne
  • ISO 11126-10:2017 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet
  • ISO 11127-5:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture
  • ISO 11125-6:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter
  • ISO 11125-4:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density
  • ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
  • ISO 11126-7:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
  • ISO 11125-4:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density
  • ISO 11125-6:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter
  • ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density
  • ISO 11127-3:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density
  • ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification
  • ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit
  • ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification
  • ISO 11126-1:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification
  • ISO 11124-1:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification
  • ISO 11124-3:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit

Professional Standard - Water Conservancy, Pretreatment group

  • SL 466-2009 Code of practice regarding the ice sampling techniques and sample preparation methods during the icebound season
  • SL 391.3-2007 Sample preparation methods for organic analysis.Part 3:Solid-phase extraction(SPE)
  • SL 391.1-2007 Sample preparation methods for organic analysis.Part 1:liquid-liquid extraction
  • SL 391.2-2007 Sample preparation methods for organic analysis.Part 2:Soxhlet extraction
  • SL 391.7-2007 Sample preparation methods for organic analysis.Part 7:Silica gel cleanup
  • SL 391.9-2007 Sample preparation methods for organic analysis.Part 9:Sulfur cleanup
  • SL 391.5-2007 Sample preparation methods for organic analysis.Part 5:Alumina cleanup
  • SL 391.4-2007 Sample preparation methods for organic analysis.Part 4:Accelerated solvent extraction(ASE)
  • SL 391.8-2007 Sample preparation methods for organic analysis.Part 8:Acid-base partition cleanup
  • SL 391.6-2007 Sample preparation methods for organic analysis.Part 6:Florisil cleanup
  • SL 391.10-2007 Sample preparation methods for organic analysis.Part 10:Sulfuric acid/permanganate cleanup

American Society for Testing and Materials (ASTM), Pretreatment group

  • ASTM E1173-15 Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations
  • ASTM E1829-14(2020) Standard Guide for Handling Specimens Prior to Surface Analysis
  • ASTM E1173-01 Standard Test Method of a Evaluation of a Preoperative, Precatheterization, or Preinjection Skin Preparations
  • ASTM E1173-01e1 Standard Test Method of a Evaluation of a Preoperative, Precatheterization, or Preinjection Skin Preparations
  • ASTM E1173-01(2009) Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations
  • ASTM D5121-10 Standard Practice for Preparation of Rock Slabs for Durability Testing
  • ASTM D4261-05 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
  • ASTM D6386-10 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

CH-SNV, Pretreatment group

British Standards Institution (BSI), Pretreatment group

  • BS ISO 18117:2009 Surface chemical analysis - Handling of specimens prior to analysis
  • BS 7933-1:1998 Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state
  • BS 7933-1:2008 Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for resinous compounds
  • BS 7079-D2:2000 Preparation of steel substrates before application of paints and related products. Surface preparation methods. Abrasive blast cleaning. Part 2: Abrasive blast cleaning
  • BS DD CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
  • 17/30324738 DC BS ISO 20579-1. Surface chemical analysis. Guidelines to sample handling, preparation and mounting. Part 1. Guidelines to handling of specimens prior to analysis
  • BS EN ISO 8504-2:2019 Preparation of steel substrates before application of paints and related products. Surface preparation methods - Abrasive blast-cleaning
  • DD CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
  • BS DD CEN/TS 16305:2012 Liming materials. Determination of the dust content of granular liming materials before and after simulated handling conditions
  • DD CEN/TS 16305:2012 Liming materials. Determination of the dust content of granular liming materials before and after simulated handling conditions
  • BS ISO 8504-4:2022 Preparation of steel substrates before application of paints and related products. Surface preparation methods - Acid pickling
  • BS EN ISO 11124-4:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
  • BS EN 84:1997 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • BS EN ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Staurolite
  • BS EN ISO 8501-2:1996 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings
  • BS EN ISO 8504-1:2019 Preparation of steel substrates before application of paints and related products. Surface preparation methods - General principles
  • BS EN ISO 11126-8:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Olivine sand
  • BS EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast cleaning abrasives. Sampling
  • BS EN ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Olivine
  • BS EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
  • BS EN ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of welds, edges and other areas with surface imperfections
  • BS EN ISO 11125-7:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
  • BS EN ISO 11125-3:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
  • BS EN ISO 11126-6:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Iron furnace slag
  • BS EN ISO 11126-4:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Coal furnace slag
  • BS EN ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Almandite garnet
  • BS EN ISO 11126-1:1997 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
  • BS EN ISO 11126-3:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Copper refinery slag
  • BS EN ISO 11126-10:2004(2005)*BS 7079-F10:2004 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
  • BS ISO 20579-4:2018 Surface chemical analysis. Guidelines to sample handling, preparation and mounting. Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis
  • BS ISO 12686:1999 Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
  • BS EN ISO 11125-6:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter
  • BS EN ISO 11125-2:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
  • BS EN ISO 11126-5:1994 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Nickel refinery slag
  • BS EN ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
  • 19/30374057 DC BS EN ISO 8504-2. Preparation of steel substrates before application of paints and related products. Surface preparation methods. Part 2. Abrasive blast-cleaning
  • 18/30375109 DC BS EN 84. Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
  • BS EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
  • BS EN ISO 11124-3:1994 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit
  • BS EN ISO 11125-4:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
  • BS EN ISO 11127-5:1994 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of moisture
  • BS EN ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture
  • BS EN ISO 11125-4:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
  • BS EN ISO 11127-5:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture
  • BS DD ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
  • BS EN ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
  • BS EN ISO 11127-3:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
  • BS EN ISO 8502-5:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
  • BS EN ISO 11125-1:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
  • BS EN 73:2014 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure
  • BS 5761-1:1989 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • BS EN 84:2020 Durability of wood and wood-based products. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
  • 18/30375112 DC BS EN 73. Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure
  • BS EN ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
  • BS ISO 11125-9:2021 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Wear testing and performance
  • BS EN ISO 11127-2:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
  • BS EN ISO 11127-7:1994 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble chlorides
  • BS EN ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble chlorides

Professional Standard - Tobacco, Pretreatment group

未注明发布机构, Pretreatment group

  • BS ISO 18117:2009(2015) Surface chemical analysis — Handling of specimens prior to analysis
  • BS 5761-1:1989(1999) Wood preservatives — Accelerated ageing of treated wood prior to biological testing — Part 1 : Evaporative ageing procedure

Association Francaise de Normalisation, Pretreatment group

  • NF ISO 18117:2009 Analyse chimique des surfaces - Manipulation des échantillons avant analyse
  • NF EN 13887:2004 Adhésifs structuraux - Guide pour la préparation de surface des métaux et des plastiques avant le collage par adhésif
  • XP X41-561*XP CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
  • NF G46-001-2/A1*NF EN ISO 11111-2/A1:2009 Textile machinery - Safety requirements - Part 2 : spinning preparatory and spinning machines
  • XP U44-185*XP CEN/TS 16305:2012 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions
  • NF X41-572:2014 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • NF V08-250:2010 Microbiology of food and animal feeding stuffs - Heat treatments prior to the enumeration or to the detection of bacterial spores
  • NF X41-572:1988 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure.
  • XP CEN/TS 15397:2006 Produits de préservation du bois - Méthode de préconditionnement naturel d'éprouvettes de bois traité, sans contact avec le sol, avant essai biologique en laboratoire
  • XP T35-502-1-1999 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness.
  • NF T35-508-9*NF EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9 : staurolite
  • NF Z71-001:1991 INFORMATION PROCESSING. TEXT AND OFFICE SYSTEMS. OFFICE DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT. PART 1 : INTRODUCTION AND GENERAL PRINCIPLES.
  • NF T35-508-10:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10 : almandite garnet.
  • NF T35-509-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1 : sampling.
  • NF T35-504-2:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning.
  • NF T35-501-3*NF EN ISO 8501-3:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3 : preparation grades of welds, edges and other areas with surface imperfections
  • NF X41-542:2015 Produits de préservation du bois - Produit de traitement anti-termites des sols, murs, fondations et maçonneries et matériaux - Epreuve de vieillissement accéléré des matériaux traités avant essais biologiques - Épreuve de percolation
  • FD X41-573*FD CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure
  • NF T35-503-2*NF EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2 : method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce
  • NF T35-503-2:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 2 : method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedur
  • XP CEN/TS 16305:2012 Amendements minéraux basiques - Détermination de la teneur en fines des amendements minéraux basiques granulés avant et après simulation des conditions de manipulation
  • NF T35-508-6:1997 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 6 : iron furnace slag.
  • NF T35-508-8:1997 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 8 : olivine sand.
  • NF T35-502-5*NF EN ISO 8502-5:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5 : measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
  • NF T35-509-1:1997 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Part 1 : sampling.

Professional Standard - Agriculture, Pretreatment group

U.S. Military Regulations and Norms, Pretreatment group

Professional Standard - Machinery, Pretreatment group

  • JB/T 6977-1993 Antirusting pretreatment of mechanical products Technical specification for cleaning
  • JB/T 5190.2-1991 Technical requirements for surface preparation before electroplating of photomechanical parts

Hubei Provincial Standard of the People's Republic of China, Pretreatment group

  • DB42/T 2054-2023 Technical specification for pre-treatment of freshwater fish processing mechanization

农业农村部, Pretreatment group

  • NY/T 3051-2016 Standards for handling samples before monitoring raw milk safety indicators

SAE - SAE International, Pretreatment group

  • SAE AS7479D-2013 Bolts and Screws@ Steel@ UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
  • SAE AS7479C-2013 Bolts and Screws@ Steel@ UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
  • SAE AMS4534-1991 COPPER-BERYLLIUM ALLOY@ BARS AND RODS 98Cu - 1.9Be Solution Heat Treated@ Cold Worked@ and Precipitation Heat Treated (TH04@ Formerly HT) (UNS C17200)
  • SAE AS7479A-2001 Bolts and Screws@ Steel@ UNS S66286 1650 Degrees F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded (FSC 5306;)
  • SAE AMS4342A-1986 ALUMINUM ALLOY@ EXTRUSIONS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) (Formerly - t736511) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)
  • SAE AS7479-1991 Bolts and Screws@ Steel@ Corrosion and Heat Resistant 1650 Degrees F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded (AMS 5734)
  • SAE AMS4534A-1994 Copper-Beryllium Alloy@ Bars and Rods 98Cu - 1.9Be Solution Heat Treated@ Cold Worked@ and Precipitation Heat Treated (TH04@ Formerly HT) (UNS C17200)
  • SAE AMS4535A-1994 COPPER-BERYLLIUM ALLOY@ MECHANICAL TUBING 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ Formerly AT) (UNS C17200)
  • SAE AMS4535-1991 COPPER-BERYLLIUM ALLOY@ MECHANICAL TUBING 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ Formerly AT) (UNS C17200)
  • SAE AMS4107B-1984 ALUMINUM ALLOY DIE FORGINGS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74) (Formerly - T736) Solution Heat Treated and Overaged (UNS A97050)
  • SAE AMS4218G-1994 Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0 -T6P) (Formerly T61P Temper) Solution and Precipitation Heat Treated (UNS A13560)
  • SAE AMS4533E-2019 Copper-Beryllium Alloy@ Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00@ formerly AT) (UNS C17200)
  • SAE AMS4342B-1991 Aluminum Alloy Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Formerly -T736511) Solution Heat Treated@ Stress Relieved@ and Overaged (UNS A97050)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pretreatment group

  • ASHRAE 4286-1999 Current Methods to Handle Wall Conduction and Room Internal Heat Transfer

AENOR, Pretreatment group

  • UNE 40470:1983 TEXTILE MACHINERY. COTTON PRE-SPINNING PROCESS MACHINERY. WORKING WIDTH
  • UNE 48313:2008 EX Paints and varnishes. Fillers for the preparation of surfaces before painting.
  • UNE-EN 13887:2004 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
  • UNE-CEN/TS 15397:2008 EX Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
  • UNE-EN 73:2015 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • UNE-EN 84:1997 WOOD PRESERVATIVES. ACCELERATED AGEING OF TREATED WOOD PRIOR TO BIOLOGICAL TESTING. LEACHING PROCEDURE.
  • UNE-EN ISO 8501-2:2002 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings. (ISO 8501-2:1994)
  • UNE-EN ISO 8504-1:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles. (ISO 8504-1:2000)

GOSTR, Pretreatment group

  • GOST R 57849-2017 Bee products. Sample preparation for the determination of pesticides chromatographic methods

Korean Agency for Technology and Standards (KATS), Pretreatment group

  • KS M ISO 8504-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 2：Abrasive blast-cleaning
  • KS M ISO 17212:2010 Structural adhesives-Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
  • KS M ISO 17212:2013 Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
  • KS D ISO 12686-2012(2017) Metallic and other inorganic coatings－Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
  • KS M ISO 8504-3-2002(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 3：Hand- and power-tool cleaning
  • KS M ISO 17212-2013(2018) Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
  • KS C IEC PAS 62182-2003(2008) Preconditioning of nonhermetic surface mount devices prior to reliability testing
  • KS M ISO 8502-5-2002(2017) Preparation of steel substrates before application of paints and related products－Tests for the assessment of surface cleanliness－Part 5：Measurement of chloride on steel surfaces prepared for painting
  • KS M ISO 11125-3-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast - cleaning abrasives－Part 3：Determination of hardness
  • KS M ISO 8504-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 1：General principles
  • KS M ISO 11125-4-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 4：Determination of apparent density
  • KS B ISO 98:2013 Textile machinery and accessories ― Spinning preparatory and spinning machinery ― Main dimensions of coverings for top rollers
  • KS B ISO 98:2003 Textile machinery and accessories-Spinning preparatory and spinning machinery-Main dimensions of coverings for top rollers
  • KS M ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile of abrasive blast-cleaned steel－Comparator procedure
  • KS M ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surface profile comparators for the assessment of abrasive

Professional Standard - Aviation, Pretreatment group

  • HB/Z 318-1998 Specification for stress relief before plating and hydrogen removal after plating

European Committee for Standardization (CEN), Pretreatment group

  • EN ISO 8504-1:2019 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)
  • EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)
  • EN ISO 8504-2:2019 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
  • EN ISO 8504-2:2001 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 2: Abrasive Blast-Cleaning
  • EN ISO 8504-3:2018 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:2018)
  • EN ISO 8504-3:2001 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 3: Hand - and Power-Tool Cleaning
  • EN ISO 11125-3:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 3: Determination of Hardness
  • PD CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
  • EN ISO 11127-5:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2020)
  • EN ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture
  • EN 84:1997 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • EN 84:1979 Wood Preservatives: Accelerated Ageing of Treated Wood Prior to Biological Testing; Leaching Procedure
  • EN 84:1989 Wood preservatives; accelerated ageing of treated wood prior to biological testing; leaching procedure
  • EN ISO 11127-2:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2020)
  • EN ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011)
  • prEN ISO 8501-1 rev Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
  • EN ISO 11127-3:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2020)
  • EN ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011)
  • EN 73:1978 Wood Preservatives: Accelerated Ageing of Treated Wood Prior to Biological Testing; Evaporative Ageing Procedure
  • EN 73:2014 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • EN ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
  • EN 73:1988 Wood preservatives; accelerated ageing of treated wood prior to biological testing; evaporative ageing procedure
  • CEN/TS 16305:2012 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions
  • EN ISO 11127-7:2022 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2022)
  • EN ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides
  • BS EN ISO 8501-2:2001 Visual assessment of surface cleanliness of steel substrates pre-treated before application of paint and related products Grade of treatment of steel substrates after partial removal of original coating
  • EN ISO 11127-4:2020 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020)
  • EN ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test
  • EN ISO 11125-1:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 1: Sampling
  • EN 84:1989/AC1:1990 Wood preservatives; accelerated ageing of treated wood prior to biological testing; leaching procedures; amends 1
  • EN 73:1988/AC:1992 Wood preservatives; accelerated ageing of treated wood prior to biological testing; evaporative ageing procedure; amendment
  • EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2020)
  • EN ISO 11126-9:2004 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
  • EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2011)
  • EN ISO 11125-5:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 5: Determination of Percentage Defective Particles and of Microstucture ISO 11125-5: 1993
  • EN ISO 8503-2:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Proce
  • EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced

ANSI - American National Standards Institute, Pretreatment group

  • X9.11-1992 Called Securities Processing - Securities Subject to Early Redemption (X9- Financial Services)

Professional Standard - Civil Aviation, Pretreatment group

  • MH/T 0034-2010 Technical Specifications for Airport Passenger Processing Front-End Access to Departure System

SE-SIS, Pretreatment group

AGMA - American Gear Manufacturers Association, Pretreatment group

  • 13FTM25-2013 Press Quenching and the Effects of Prior Thermal History on Distortion during Heat Treatment

American Gear Manufacturers Association, Pretreatment group

  • AGMA 13FTM25-2013 Press Quenching and the Effects of Prior Thermal History on Distortion during Heat Treatment

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Pretreatment group

Yunnan Provincial Standard of the People's Republic of China, Pretreatment group

  • DB5304/T 053.2-2022 Pre-hospital first aid classification management part 2: emergency response and disposal

German Institute for Standardization, Pretreatment group

  • DIN EN 13887:2003-11 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding; German version prEN 13887:2003
  • DIN EN ISO 11125-1:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
  • DIN EN 84:1997 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure; German version EN 84:1997
  • DIN EN ISO 11125-3:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997
  • DIN CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test; German version CEN/TS 15397:2006
  • DIN EN ISO 11126-8:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997
  • DIN EN ISO 11126-6:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997
  • DIN EN ISO 11126-4:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993); German version EN ISO 11126-4:1998
  • DIN EN ISO 11125-2:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997
  • DIN EN ISO 11126-5:1998 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993); German version EN ISO 11126-5:1998
  • DIN EN ISO 11127-5:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2011); German version EN ISO 11127-5:2011
  • DIN EN ISO 11127-2:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011); German version EN ISO 11127-2:2011
  • DIN EN ISO 11125-6:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997
  • DIN CEN/TS 15397:2006-08 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test; German version CEN/TS 15397:2006
  • DIN EN ISO 11127-3:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011); German version EN ISO 11127-3:2011
  • DIN EN ISO 11126-3:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993); German version EN ISO 11126-3:1997
  • DIN CEN/TS 16305:2012-04*DIN SPEC 10786:2012-04 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions; German version CEN/TS 16305:2012
  • DIN EN ISO 8504-2:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
  • DIN EN ISO 11127-7:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:2011); German version EN ISO 11127-7:2011
  • DIN EN ISO 11126-1:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2:1
  • DIN EN ISO 11127-4:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2011); German version EN ISO 11127-4:2011
  • DIN EN ISO 11126-9:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
  • DIN EN ISO 11125-5:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN IS
  • DIN EN ISO 11127-6:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011); German version
  • DIN ISO 98:2001 Textile machinery and accessories - Spinning preparatory and machinery - Main dimensions of coverings for top rollers
  • DIN EN ISO 11126-10:2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004
  • DIN EN 84:2020 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • DIN EN 84:2020-10 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure; German version EN 84:2020
  • DIN EN ISO 8504-1:2020-03 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019); German version EN ISO 8504-1:2019
  • DIN EN ISO 11126-7:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999
  • DIN EN 73:1990 Wood preservatives; accelerated ageing tests of treated wood prior to biological testing; evaporative ageing procedure; german version EN 73:1988
  • DIN EN ISO 8502-3:1999 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992); Ge
  • DIN EN ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2011); German version EN ISO 11127-1:2011
  • DIN EN ISO 8504-1:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)
  • DIN EN 73:2020 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • DIN EN ISO 8502-5:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998); Ge

HU-MSZT, Pretreatment group

The Society for Protective Coatings (SSPC), Pretreatment group

  • SSPC SP 12-2002 Surface Preparation and Cleaning of Cleaning of Metals by Waterjetting Prior to Recoating NACE NO. 5: 2002

International Telecommunication Union (ITU), Pretreatment group

  • ITU-T X.702-1995 Information Technology - Open Systems Interconnection - Application Context for Systems Management with Transaction Processing - Data Networks and Open System Communications OSI Management 16 pp

Professional Standard-Ships, Pretreatment group

  • CB* 3328.1-1988 Method for inspecting quality of water discharged from treatment of vessel sewage. Method of test for number of coliform groups
  • CB/T 3328.1-2013 Test method for waste water quality of ship sewage treatment.Part1:Thermotolerant coliform counts

IEC - International Electrotechnical Commission, Pretreatment group

  • PAS 62182-2000 Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing (Edition 1.0)

PL-PKN, Pretreatment group

  • PN-EN ISO 8504-1-2020-04 D Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles (ISO 8504-1:2019)
  • PN EN 84-1993 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
  • PN EN 73-1993 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaprorative ageing procedure
  • PN-EN 84-2021-01 E Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • PN-EN 73-2021-01 E Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • PN-EN ISO 11127-1-2021-07 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 1: Sampling (ISO 11127-1:2020)

Danish Standards Foundation, Pretreatment group

  • DS/EN 13887:2003 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
  • DS/CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
  • DS/EN 84:1990 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
  • DS/EN 84:1998 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • DS/CEN/TS 16305:2012 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions
  • DS/EN 73/AC:1994 Wood preservatives-Accelerated ageing of treated wood prior to biological testing-Evaporative ageing procedure
  • DS/EN ISO 8501-2:2001 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
  • DS/EN 73:1994 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • DS/EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
  • DS/EN ISO 8501-3:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
  • DS/CEN/TR 15046:2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure

Lithuanian Standards Office , Pretreatment group

  • LST EN 13887-2004 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
  • LST EN 84-2000 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • LST EN 73+AC-2000 Wood preservatives - Accelerated ageing tests of treated wood prior to biological testing - Evaporative ageing procedure
  • LST EN ISO 8501-2:2002 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
  • LST EN 84-2020 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • LST EN 73-2020 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure

CEN - European Committee for Standardization, Pretreatment group

  • EN ISO 11125-3:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness
  • PREN 84-2018 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • PREN 73-2018 Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
  • EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling
  • EN ISO 11125-5:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure
  • EN ISO 11126-1:2018 Preparation of steel substrates before application of paints and related products - Specifications for nonmetallic blast-cleaning abrasives - Part 1: General introduction and classification
  • EN ISO 11126-5:2018 Preparation of steel substrates before application of paints and related products - Specifications for nonmetallic blast-cleaning abrasives - Part 5: Nickel slag
  • EN ISO 11126-6:2018 Preparation of steel substrates before application of paints and related products - Specifications for nonmetallic blast-cleaning abrasives - Part 6: Iron and steel slags
  • EN ISO 11126-8:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine

American National Standards Institute （ANSI), Pretreatment group

  • CGA G-1.11-2018 (R2023) Guideline for Handling Acetylene Cylinders and Ancillary Equipment in Fires (Formerly SB-4)
  • ANSI/INCITS TR 7-1989 Information Processing Systems Technical Report User Documentation for Consumer Software Packages formerly ANSI X3/TR-7-1989

National Association of Corrosion Engineers (NACE), Pretreatment group

  • NACE 6G186-2010 Surface Preparation of Soluble Salt Contaminated Steel Substrates Prior to Coating (Item No. 24243)

RO-ASRO, Pretreatment group

  • STAS SR EN 73-1995 Wood preservatives. Accelerated ageing of treated wood prior to biological testing Evaporative ageing procedure
  • STAS SR EN 84-1993 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure

ES-UNE, Pretreatment group

  • UNE-EN ISO 8504-2:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
  • UNE-EN 84:2021 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • UNE-EN ISO 8504-1:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)

Aerospace, Security and Defence Industries Association of Europe (ASD), Pretreatment group

  • ASD-STAN PREN 2743-1991 Aerospace Series Reinforced Plastics Standard Procedures for Conditioning Prior to Testing (Issue P 1)

Professional Standard - Ocean, Pretreatment group

  • HY/T 132-2010 Pretreatment guideline of heavy metals analysis in the marine sediments and organisms-Microwave assisted acid digestion

IN-BIS, Pretreatment group

Association of German Mechanical Engineers, Pretreatment group

  • DVS 2307-1-1999 Protective measures to be implemented when degreasing and abrasive-blasting surfaces prior to thermal spraying

API - American Petroleum Institute, Pretreatment group

  • API DR 351-1996 Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity

FI-SFS, Pretreatment group

SG-SPRING SG, Pretreatment group

  • SS 5 Pt.A3-1985 Methods Of Test For Paints, Varnishes And Related Materials Part A3 : Preparation Of Panels Prior To Painting

KR-KS, Pretreatment group

  • KS M ISO 8502-3-2017 Preparation of steel substrates before application of paint and related products－Tests for the assessment of surface cleanliness－Part 3：Assessment of dust on steel surface prepared for painting (press

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pretreatment group

  • GB/T 17850.4-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag
  • GB/T 18838.2-2017 Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit
  • GB/T 17850.5-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag
  • GB/T 17850.7-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide
  • GB/T 17850.1-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification

CN-STDBOOK, Pretreatment group

  • 图书 3-9832 Coatings and pigments standard compilation Substrate treatment before painting and coating technical specifications Standard painting volume 2021

IT-UNI, Pretreatment group

  • UNI EN 84-2020 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
  • UNI EN 73-2020 Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure

Sichuan Provincial Standard of the People's Republic of China, Pretreatment group

  • DB51/T 1910-2014 Sample pretreatment specification for determination of trace heavy metals in forest food and its environment by atomic absorption method

US-CFR-file, Pretreatment group

  • CFR 42-413.237-2013 Public Health. Part413:Principles of reasonable cost reimbursement;payment for end-stage renal disease services;optional prospectively determined payment rates for skilled nursing facilities. Section413.237:Outliers.

ETSI - European Telecommunications Standards Institute, Pretreatment group

  • ES 201 108-2003 Speech Processing@ Transmission and Quality Aspects (STQ); Distributed speech recognition; Front-end feature extraction algorithm; Compression algorithms (V1.1.3)
  • ES 201 108-2000 Speech Processing@ Transmission and Quality Aspects (STQ); Distributed Speech Recognition; Front-End Feature Extraction Algorithm; Compression Algorithms (V1.1.2)
  • ES 201 108-1999 Speech Processing@ Transmission and Quality Aspects (STQ); Distributed Speech Recognition; Front-End Feature Extraction Algorithm; Compression Algorithms (V1.1.1)

ESD - ESD ASSOCIATION, Pretreatment group

  • TR10.0-01-2002 Measurement and ESD Control Issues for Automated Equipment Handling of ESD Sensitive Devises Below 100 Volts (Formerly TR14-02)

AREMA - American Railway Engineering and Maintenance-of-Way Association, Pretreatment group

  • CHAPTER 3/PART 5-1985 Handling of Ties from the Tree into the Track (Current from August 1@ 1997 to July 31@ 1998; Volume 1/Track)

  Sample pretreatment, pre-processing, Pretreatment group, Inorganic pretreatment, Various pretreatment, Organic pretreatment, Inorganic pretreatment Organic pretreatment, Inorganic pretreatment Organic pretreatment, Organic pretreatment and inorganic pretreatment, Pretreatment experiment, Organic pretreatment and inorganic pretreatment, Pretreatment purification, Trace pretreatment, Automatic preprocessing, Inorganic pretreatment and organic pretreatment, Pretreatment method, Pretreatment series, Metal pretreatment, Inorganic pretreatment, organic pretreatment, Sample preparation before testing.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved