ZH
RU
ES

About Method Validation and Method Validation

About Method Validation and Method Validation, Total:393 items.

In the international standard classification, About Method Validation and Method Validation involves: Quality, Protection against fire, Microbiology, Sterilization and disinfection, Coals, Raw materials for rubber and plastics, General methods of tests and analysis for food products, Medical sciences and health care facilities in general, Ventilators. Fans. Air-conditioners, Capacitors, Acoustics and acoustic measurements, Petroleum products in general, Biology. Botany. Zoology, Electrical engineering in general, Measurement of force, weight and pressure, Animal feeding stuffs, Leather technology, Testing of metals, Installations in buildings, Metrology and measurement in general, Vocabularies, Measurement of volume, mass, density, viscosity, Road vehicle systems, Analytical chemistry, Applications of information technology, Agricultural machines, implements and equipment, Switchgear and controlgear, Nuclear energy engineering, Industrial trucks, Fruits. Vegetables, Linear and angular measurements, Fluid storage devices, Electromechanical components for electronic and telecommunications equipment, Air quality, Milk and milk products, Protective equipment, Protection against electric shock, Products of the textile industry, Test conditions and procedures in general, Electrical accessories, Farming and forestry, Lubricants, industrial oils and related products, Paints and varnishes, Radiation measurements, SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT. ADMINISTRATION. TRANSPORT, Commercial vehicles.

国家市场监督管理总局, About Method Validation and Method Validation

RB/T 033-2020 Guidelines for Validation and Validation of Microbiological Test Methods
RB/T 032-2020 Gene Amplification Test Method Validation and Validation Guide
RB/T 063-2021 Verification and validation requirements for management and technical capability evaluation methods of inspection and testing institutions

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, About Method Validation and Method Validation

GB/T 27417-2017 Conformity assessment—Guidance on validation and verification of chemical analytical methods
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports
GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography
GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion
GB/T 19973.2-2018 Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition，validation and maintenance of a sterilization process
GB/T 24276-2017 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation

Professional Standard - Agriculture, About Method Validation and Method Validation

CNAS-TRL-011-2020 Guidelines for Validation and Validation of Chemical Analysis Methods for Light Industrial Products

Korean Agency for Technology and Standards (KATS), About Method Validation and Method Validation

KS F ISO 16730-2012(2022) Fire safety engineering－Assessment, verification and validation of calculation methods
KS F ISO 16730-2012(2017) Fire safety engineering－Assessment, verification and validation of calculation methods
KS B 0520-2009 method of welding procedure qualification test for nickel and nickel alloy clad steels
KS I ISO 7574-3:2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 3: Simple(transition) method for stated values for batches of machines
KS I ISO 7574-2:2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 2: Methods for stated values for individual machines
KS I ISO 7574-4:2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 4: Methods for stated values for batches of machines
KS C IEC 60695-11-3-2005(2020) Fire hazard testing－Part 11－3：Test flames－500 W flames－Apparatus and confirmational test methods
KS C 0295-2004(2019) Fire hazard testing－Part 11－3：Test flames－500 W flames－Apparatus and confirmational test methods
KS C IEC 60695-11-4-2005(2020) Fire hazard testing－Part 11－4：Test flames－50 W flames－Apparatus and confirmational test methods
KS M ISO 4259-3:2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
KS I ISO 7574-1:2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 1: General considerations and definitions
KS B ISO 13564-1:2015 Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS C IEC 61318:2022 Live working — Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
KS B 8400-2-2015(2020) Lasers and laser-related equipments — Test methods for laser interferometers for displacement measurement — Part 2: Test methods for laser interferometers
KS H ISO 3890-2:2006 Milk and milk products－Determination of residues of organochlorine compounds(pesticides)－Part 2：Test methods for crude extract purification and confirmation
KS H ISO 3890-2-2006(2016) Milk and milk products－Determination of residues of organochlorine compounds(pesticides)－Part 2：Test methods for crude extract purification and confirmation
KS H ISO 3890-2:2021 Milk and milk products — Determination of residues of organochlorine compounds(pesticides) — Part 2: Test methods for crude extract purification and confirmation

International Organization for Standardization (ISO), About Method Validation and Method Validation

ISO/IEC GUIDE 16:1978 Code of principles on third party certification systems and related standards
ISO 16140-6:2019 Microbiology of the food chain — Method validation — Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures
ISO/CD 7574.2 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment
ISO/CD 7574:2023 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment
ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test
ISO 4259-3:2020 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
ISO/FDIS 24190 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface
ISO 13564-1:2012 Powered industrial trucks - Test methods for verification of visibility - Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
ISO 24190:2023 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
ISO/TS 13075:2009 Gaseous-media fire-extinguishing systems - Engineered extinguishing systems - Flow calculation implementation method and flow verification and testing for approval
ISO/TR 22694:2008 Gas cylinders - Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing
ISO 8196-3:2022 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analys
ISO 8196-3:2022 | IDF 128-3 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 8196-3:2009 | IDF 128-3:2009 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 8196-3:2022 | IDF 128-3:2022 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 21187:2004 | IDF 196:2004 Milk — Quantitative determination of bacteriological quality — Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results
ISO 21187:2021 | IDF 196:2021 Milk — Quantitative determination of microbiological quality — Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results
ISO 3890-2:2009|IDF 75-2:2009 Milk and milk products — Determination of residues of organochlorine compounds (pesticides) — Part 2: Test methods for crude extract purification and confirmation
ISO 3890-2:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 2: Test methods for crude extract purification and confirmation
ISO 3890-2:2000 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 2: Test methods for crude extract purification and confirmation
ISO 4259-4:2021 Petroleum and related products — Precision of measurement methods and results — Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard te
ISO 3890-2:2009 | IDF 75-2:2009 Milk and milk products — Determination of residues of organochlorine compounds (pesticides) — Part 2: Test methods for crude extract purification and confirmation
ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, About Method Validation and Method Validation

GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis.Terms and definitions
GB/T 31593.1-2015 Fire safety engineering.Part 1: Assessment, verification and validation of calculation methods
GB/T 18510-2001 Guidelines for the validation of alternative methods of analysis for coal and coke
GB/T 15338-2008 Standard guide for carbon black.Validation of test method precision and bias
GB/T 15338-2012 Carbon black.Validation of test method precision and bias
GB/T 15338-1994 Standard guide for carbon black--Validation of test method precision and bias
GB/T 5169.5-2008 Fire hazard testing for electric and electronic products.Part 5:Test flames.Needle test method.Apparatus,confirmatory arrangement and guidance
GB/T 5169.22-2015 Fire Hazard Tests for Electrical and Electronic Products - Part 22: Test Flame 50W Flame Apparatus and Confirmation Test Methods
GB/T 5169.15-2008 Fire hazard testing for electric and eletronic products.Part 15: Test flames.50OW flames.Apparatus and confirmational test methods
GB/T 5169.22-2008 Fire hazard testing for electric and electronic products.Part 22:Test flames.50W flame.Apparatus and confirmational test methods
GB/T 5169.15-2015 Fire hazard testing for electric and eletronic products.Part 15: Test flames.500 W flames.Apparatus and confirmational test methods
GB/T 6683.3-2023 Precision of measurement methods and results for petroleum and related products - Part 3: Monitoring and verification of published precision data for test methods
GB/T 18256-2015 Non-destructive testing of steel tubes.Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
GB/T 5169.14-2007 Fire hazard testing for electric and eletronic products.Part 14:Test flames.1kW nominal Pre-mixed flame.Apparatus,confirmatory test arrangement and guidance
GB/T 5169.14-2017 Fire hazard testing for electric and electronic products.Part 14:Test flames.1 kW nominal pre-mixed flame.Apparatus,confirmatory test arrangement and guidance

CU-NC, About Method Validation and Method Validation

NC 90-01-46-1987 Metrological Assurance. Verification and Layout Surfaces. Methods and Means of Verification
NC 90-01-07-1985 Metrological Assurance. Depth Micrometer. Verification Methods and Means
NC 90-01-09-1986 Metrological Assurance Pasameters, Verification Methods and Means
NC 90-01-06-1985 Metrological Assurance. Lever Micrometer. Verification Methods and Means
NC 90-01-45-1985 Metrological Assurance. Cogwheel's Normal Measuring Device. Verlfication Methods and Means
NC 90-06-39-1984 Metrologleal Assuranoe. Welghing Instrumenta for Plece Computation. Verifioation Methods and Means
NC 90-01-39-1984 Metrological Assurance. Wires and Rollers for Measuring Threads. Verification Methods and Means
NC 90-01-05-1987 Metrological Assurance. Sphere Indicator with 0,01 Division Value. Methods and Means of Verification
NC 90-07-11-1984 Metrological Assurance. Piston-and-Weigh Gages with Upper Measurement Limits up to 250 MPa (2 500 Kgf/cm2) and Precision Classes Less Than or Equal to 0,02. Verification Methods and Means
NC 90-01-44-1985 Metrological Assuranoe. PlanoParallel Measures with Nominal Length Greater Tlian 100 up to 1 000 mm, Verification Methods and Means

British Standards Institution (BSI), About Method Validation and Method Validation

BS EN ISO 16140-6:2019 Microbiology of the food chain. Method validation - Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures
BS ISO 16730-1:2015 Fire safety engineering. Procedures and requirements for verification and validation of calculation methods. General
PD ISO/TR 16730-3:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a CFD model
PD ISO/TR 16730-4:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a structural model
PD ISO/TR 16730-2:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a fire zone model
PD ISO/TR 16730-5:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of an Egress model
BS 6805-2:1987 Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for individual machines
BS 6805-4:1987 Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Methods for determining and verifying stated values for batches of machines
BS 6805-3:1987 Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for batches of machines using a simple (transition) method
PD ISO/TS 16393:2019 Molecular biomarker analysis. Determination of the performance characteristics of qualitative measurement methods and validation of methods
BS EN ISO 4259-1:2017 Petroleum and related products. Precision of measurement methods and results. Determination of precision data in relation to methods of test
18/30350503 DC BS ENISO 4259-3. Petroleum and related products. Precision of measurement methods and results. Part 3. Monitoring and verification of published precision data in relation to methods of test
BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
BS ISO 24190:2023 Biotechnology. Analytical methods. Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
PD IEC TR 60890:2022 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
BS EN ISO 4259-3:2020 Petroleum and related products. Precision of measurement methods and results - Monitoring and verification of published precision data in relation to methods of test
BS 6805-1:1987 Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Glossary of terms
22/30397817 DC BS ISO 24190. Biotechnology. Analytical Methods. Risk based approach for design and validation of methods for rapid microbial detection in bioprocesses
BS ISO 3890-2:2010 Milk and milk products. Determination of residues of organochlorine compounds (pesticides). Test methods for crude extract purification and confirmation
BS ISO 3890-2:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Test methods for crude extract purification and confirmation
20/30411208 DC BS ISO 8196-3. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Part 3. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
BS EN ISO 12960:2020 Geotextiles and geotextile-related products. Screening test methods for determining the resistance to acid and alkaline liquids
BS ISO 8196-3:2022 Tracked Changes. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
BS ISO 23517:2021 Plastics. Soil biodegradable materials for mulch films for use in agriculture and horticulture. Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents. Requirements and test methods regarding biodegradation, ecotox
PD ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
BS EN ISO 21187:2005 Milk. Quantitative determination of bacteriological quality. Guidance for establishing and verifying conversion relationship between routine method results and anchor method results
21/30384248 DC BS EN ISO 4259-4. Petroleum and related products. Precision of measurement methods and results. Part 4. Use of Statistical Control Charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory
22/30449711 DC BS EN ISO 18183-3. Geometrical product specifications (GPS). Partitioning - Part 3. Methods used for specification and verification
BS PD ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
BS EN IEC 61318:2021 Tracked Changes. Live working. Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
19/30391054 DC BS EN ISO 21187. Milk. Quantitative determination of bacteriological quality. Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results
BS EN 17128:2020 Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use. Personal light electric vehicles (PLEV). Requirements and test methods
BS EN 16842-5:2021 Powered industrial trucks. Visibility. Test methods and verification. Industrial variable-reach trucks greater than 10 000 kg capacity

Association Francaise de Normalisation, About Method Validation and Method Validation

NF EN ISO 16140-6:2019 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 6 : protocole pour la validation de méthodes alternatives (commerciales) pour la confirmation microbiologique et le typage
NF P92-540-1*NF ISO 16730-1:2016 Fire safety engineering - Procedures and requirements for verification and validation of calculation methods - Part 1 : general
NF ISO 16730-1:2016 Ingénierie de la sécurité incendie - Procédures et exigences pour la vérification et la validation des méthodes de calcul - Partie 1 : généralités
FD ISO/TR 16730-3:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 3 : exemple d''un modèle CFD
FD ISO/TR 16730-2:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 2 : exemple d'un modèle de zone
FD ISO/TR 16730-4:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 4 : exemple d'un modèle strucutral
FD ISO/TR 16730-5:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 5 : Exemple d''un modèle d''évacuation
XP ISO/TS 16393:2019 Analyse de biomarqueurs moléculaires - Détermination des caractéristiques de performance des méthodes de mesure qualitatives et validation des méthodes
NF X42-150*NF ISO 21899:2020 Biotechnology - Biobanking - General requirements for the validation and verification of processing methods for biological material in biobanks
XP P98-092-2:2000 Tests relating to the determination of expansion joints capacity - Verification of the flexion of road bridge roadway expansion joints - Part 2 : test method independent of temperature
NF M07-033-3*NF EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3 : monitoring and verification of published precision data in relation to methods of test
XP S98-108*XP ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
NF H96-312-1:2013 Powered industrial trucks - Test methods for verification of visibility - Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
NF EN ISO 4259-3:2020 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 3 : surveillance et vérification des données de fidélité publiées relatives aux méthodes d'essai
NF C18-418*NF EN IEC 61318:2021 Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
NF EN IEC 61318:2021 Travaux sous tension - Méthodes d'évaluation des défauts et vérification des performances applicables aux outils, dispositifs et équipement
NF ISO 8196-3:2022 Lait - Définition et évaluation de la précision globale des méthodes alternatives d'analyse du lait - Partie 3 : Protocole d'évaluation et de validation des méthodes quantitatives alternatives pour l'analyse du lait
NF V03-110:2010 Analyse des produits agricoles et alimentaires - Protocole de caractérisation en vue de la validation d'une méthode d'analyse quantitative par construction du profil d'exactitude
NF V04-055*NF EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results
NF EN ISO 21187:2021 Lait - Mesure quantitative de la qualité microbiologique - Lignes directrices pour établir et vérifier une relation de conversion entre les résultats de la méthode alternatif et les résultats de la méthode d'ancrage
NF EN 12393-3:2013 Aliments d'origine végétale - Méthodes multirésidus de détermination de résidus de pesticides par CPG ou CL-SM/SM - Partie 3 : détermination et essais de confirmation
NF EN 16990:2020 Véhicules motorisés légers non soumis à la réception par type pour le transport de personnes, de marchandises ainsi que d'autres équipements - Véhicules côte à côte - Exigences de sécurité et méthodes d'essai

German Institute for Standardization, About Method Validation and Method Validation

DIN EN ISO 16140-6:2020-04 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019); German version EN ISO 16140-6:2019
DIN EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
DIN CEN/TS 17455:2020-07 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins; German version CEN/TS 17455:2020
DIN 55350-13:1987 Concepts in quality and statistics; concepts relating to the accuracy of methods of determination and of results of determination
DIN EN ISO 4259-3:2020-08 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020); German version EN ISO 4259-3:2020
DIN EN ISO 18183-3:2022-12 Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO/DIS 18183-3:2022); German and English version prEN ISO 18183-3:2022 / Note: Date of issue 2022-11-04
DIN EN 17128:2021 Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Personal light electric vehicles (PLEV) - Requirements and test methods; German version EN 17128:2020
DIN EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
DIN EN ISO 21187:2021-06 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021); German version EN ISO 21187:2021
DIN EN 27574-2:1989-03 Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines; (identical with ISO 7574-2:1985); german version EN 27574-2:1988
DIN EN 27574-4:1989-03 Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines; (identical with ISO 7574-4:1985); german version EN 27574-4:1988
DIN EN ISO 13438:2016 Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO/DIS 13438:2016); German and English version prEN ISO 13438:2016
DIN EN ISO 12960:2020 Geotextiles and geotextile-related products - Screening test methods for determining the resistance to acid and alkaline liquids (ISO 12960:2020)
DIN EN ISO 21187:2019 Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO/DIS 21187:2019); German and English version prEN ISO 2
DIN EN 27574-3:1989-03 Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 3: simple (transition) method for stated values for batches of machines; (identical with ISO 7574-3:1985); german version EN 2757...
DIN EN 12393-3:2014-01 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 3: Determination and confirmatory tests; German version EN 12393-3:2013

ES-UNE, About Method Validation and Method Validation

UNE-EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
UNE-CEN/TS 17455:2021 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
UNE-EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
UNE-EN IEC 61318:2021 Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)

International Telecommunication Union (ITU), About Method Validation and Method Validation

ITU-R QUESTION 124/6-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures
ITU-R QUESTION 1246-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, About Method Validation and Method Validation

QUESTION 124/6-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures

European Committee for Standardization (CEN), About Method Validation and Method Validation

EN ISO 16140-6:2019 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
PRCR 537-1992 Definitions, Test Methods and Interpretation for EN 71-1:1988
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
prEN ISO 18497-4 Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 4: Verification methods and validation principles (ISO/DIS 18497 4:2022)
EN 15859:2010 Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures
EN 1264-2:2008+A1:2012 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods
ENV ISO 12960:1998 Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Liquids ISO/TR 12960:1998; Superseded by EN 14030:2001
ENV ISO 13438:1999 Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Oxidation ISO/TR 13438:1999
EN ISO 4259-4:2022 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)
prEN ISO 18183-3 Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO/DIS 18183-3:2022)
DD ENV 12447-1997 Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Hydrolysis Superseded by EN 12447:2001

American Society for Testing and Materials (ASTM), About Method Validation and Method Validation

ASTM D4196-82(1998) Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM D4196-05 Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM D4196-05(2019) Standard Test Method for Confirming the Sterility of Membrane Filters
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-16 Standard Guide for Carbon Black&x2014;Validation of Test Method Precision and Bias
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D6403-99(2020) Standard Test Method for Determining Moisture in Raw and Spent Materials
ASTM E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM E2410-04 Standard Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2006)
ASTM F1596-07 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity
ASTM D7235-16 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM F1662-10 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM F1662-03 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM F2340-05(2010) Standard Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
ASTM F2340-05(2016) Standard Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
ASTM F2340-05(2021) Standard Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
ASTM D7110-21 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7110-20 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM D7110-05 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM E3290-21 Standard Test Method for Establishing Performance of Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
ASTM D7235-05 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-14 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM F1662-04 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM F1995-13(2021) Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch

Group Standards of the People's Republic of China, About Method Validation and Method Validation

T/HCAA 002-2021 Guidance for verification and validation of quantitative detection methods of pesticide residues in fruits and vegetables

American National Standards Institute （ANSI), About Method Validation and Method Validation

ANSI/AMCA 230-2015 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification
ANSI/AMCA 230-2012 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification

CH-SNV, About Method Validation and Method Validation

SN EN ISO 16140-6:2021 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
SN EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)

未注明发布机构, About Method Validation and Method Validation

WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures

AENOR, About Method Validation and Method Validation

UNE-ISO 16730-1:2017 Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General
UNE-EN 60695-11-5:2005 Fire hazard testing -- Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
UNE 74105-4:1992 ACOUSTICS. STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT. PART 4: METHODS FOR STATED VALUES FOR BATCHES OF MACHINES.
UNE 74105-2:1991 ACOUSTICS. STATISTICAL METHODS FOR DETERMINING AND VERYFING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT. PART 2: METHODS FOR STATED VALUES FOR INDIVIDUAL MACHINES.
UNE 74105-3:1991 ACOUSTICS. STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT. PART 3: SIMPLE (TRANSITION) METHOD FOR STATED VALUES FOR BATCHES OF MACHINES.
UNE-EN ISO 13438:2005 Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004)
UNE-EN 12225:2001 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST.
UNE-EN ISO 21187:2007 Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results (ISO 21187:2004)
UNE 74105-1:1990 ACOUSTICS. STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT. PART 1: GENERAL CONSIDERATIONS AND DEFINITIONS

International Electrotechnical Commission (IEC), About Method Validation and Method Validation

IEC TR 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
IEC TS 60695-2-20:2021 Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot wire ignition coil test method - Apparatus, verification, test method and guidance
IEC TR 60890:2022 RLV A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
IEC TR 60890:2022 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, About Method Validation and Method Validation

GJB 1209-1991 Test methods and procedures for microcircuit line certification

VN-TCVN, About Method Validation and Method Validation

TCVN 6923-2001 Road vehicles.Horns.Requirements and test methods in type approval
TCVN 6769-2001 Road vehicles.Rear view mirrors.Requirements and test methods in type approval
TCVN 6758-2000 Road vehicles.Safety glazing and glazing material.Requirements and test methods in type approval
TCVN 6955-2001 Road vehicles.Headlamps of motorcycles.Requirements and test methods in type approval
TCVN 7881-2008 Road vehicles.Noise emitted from motorcycles.Requirements and test methods in type approval
TCVN 7228-2002 Road vehicles.Braking devices of passenger cars.Requirements and test methods in type approval
TCVN 7880-2008 Road vehicles.Noises emitted from automobiles.Requirements and test methods in type approval
TCVN 7882-2008 Road vehicles.Noises emitted from mopeds.Requirements and test methods in type approval
TCVN 6919-2001 Road vehicles.Braking devices of power-driven vehicles, trailers.Requirements and test methods in type approval
TCVN 6770-2001 Road vehicles.Rear view mirrors of motorcycles and mopeds.Requirements and test methods in type approval
TCVN 7357-2010 Road vehicles.Gaseous pollutants emitted by motorcycles.Requirements and test methods in type approval
TCVN 7346-2003 Mopeds.Headlamps equipped with filament halogen lamps (HS2).Requirements and test methods in type approval
TCVN 6824-2001 Road vehicles.Braking device of motorcycles and mopeds.Requirements and test methods in type approval
TCVN 6771-2001 Road vehicles.Pneumatic tyres for motorcycles and mopeds.Requirements and test methods in type approval
TCVN 6890-2001 Road vehicles.Stands of two-wheel motorcycles, mopeds.Requirements and test methods in type approval
TCVN 7001-2002 Road vehicles.Safety belts and restraints systems for adult occupation.Requirements and test methods in type approval
TCVN 7361-2003 Road vehicles.Rear marking plates for heavy and long vehicles.Requirements and test methods in type approval
TCVN 6976-2001 Road vehicles.Front fog lamps for power-driven vehicles Requirements and test methods in type approval
TCVN 6977-2001 Road vehicles.Reversing lamps for power-driven vehicles and their trailer.Requirements and test methods in type approval
TCVN 6975-2001 Road vehicles.Rear fog lamps for power-driven vehicles and their trailers.Requirements and test methods in type approval
TCVN 7227-2002 Road vehicles.Pneumatic tyres for commercial vehicles and their trailers.Requirements and test methods in type approval
TCVN 6786-2001 Road vehicles.Steering equipment of motor vehicles and trailers, semi trailers.Requirements and test methods in type approval
TCVN 6901-2001 Road vehicles.Retrorefiecting devices for power-driven vehicles and trailers.Requirements and test methods in type approval
TCVN 6759-2000 Road vehicles.Headlamps equipped with halogen filament lamps.Technical requirements and test method in type approval
TCVN 6956-2001 Road vehicles.Speedometer equipment installed in motor vehicles.Requirements and test methods in types approval
TCVN 7226-2002 Road vehicles.Pneumatic tyres for private (passenger) cars and their trailers.Requirements and test methods in type approval
TCVN 7792-2007 Road vehicles.The emission of carbon dioxide (CO2) and fuel consumption of passenger cars powered by an internal combustion engine.Requirements and test methods in Type Approval
TCVN 7003-2002 Road vehicles.Protective device against unauthorized use of two or three-wheeled motorcycles and mopeds.Requirements and test methods in type approval
TCVN 6565-2006 Road vehicles.Emission of visible pollutants (smoke) from compression ignition engines.Requirements and test methods in type approval
TCVN 6954-2001 Road vehicles.Fuel tank of two or three wheel motorcycles and mopeds.Requirements and test methods in types approval
TCVN 7345-2003 Mopeds.Headlamps equipped with filament lamps, emitting a driving beam and passing beam.Reqirements and test methods in type approval
TCVN 6785-2006 Road vehicles.The emission of pollutants emitted from automobiles according to engines fuel requirements.Requirements and test methods in type approval
TCVN 6973-2001 Road vehicles.Filament lamps in lamps units of power driven vehicles and their trailers.Requirements and test methods in type approval
TCVN 7344-2003 Mopeds.Headlamps equipped with filament lamps, emitting one single passing beam.Requirements and test methods in type approval
TCVN 6999-2002 Road vehicles.External projections from two or three-wheel motorcycles and mopeds.Requirements and test methods in type approval
TCVN 7082-2-2010 Milk and milk products.Determination of residues of organochlorine compounds (pesticides).Part 2: Test methods for crude extract purification and confirmation
TCVN 7002-2002 Road vehicles.Rear registration plate lamps for moto vehicles (except motorcycles) and their trailers.Requirements and test methords in type approval
TCVN 6567-2006 Road vehicles.Compression ignition engines, positive.ignition engines fuelled with liquefied petroleum gas and natural gas engines equipped for automobiles.Requirements and test method of emission of pollutants in type approval
TCVN 6920-2001 Road vehicles.Protection of the driver against the steering mechanism in the event of impact.Requirements and test methods in type approval
TCVN 6978-2001 Road vehicles.Installation of lighting and light-signalling devices on motor vehicles and their trailers.Requirements and test methods in type approval

SAE - SAE International, About Method Validation and Method Validation

SAE AS6810-2018 Requirements for Accreditation Bodies when Accrediting Test Laboratories Performing Detection of Suspect/Counterfeit in Accordance with AS6171 General Requirements and the Associated Test Method
SAE J912-1994 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials@ Standard
SAE J912A-1972 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

KR-KS, About Method Validation and Method Validation

KS I ISO 7574-3-2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 3: Simple(transition) method for stated values for batches of machines
KS I ISO 7574-2-2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 2: Methods for stated values for individual machines
KS I ISO 7574-4-2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 4: Methods for stated values for batches of machines
KS M ISO 4259-3-2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
KS I ISO 7574-1-2020 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment —Part 1: General considerations and definitions
KS C IEC 61318-2022 Live working — Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
KS H ISO 3890-2-2021 Milk and milk products — Determination of residues of organochlorine compounds(pesticides) — Part 2: Test methods for crude extract purification and confirmation

IX-EU/EC, About Method Validation and Method Validation

78/1999-1999 Decision of the EEA Joint Committee Amending Annex II (Technical Regulations, Standards, Testing and Certification) to the EEA Agreement
NO 139/2007-2007 DECISION OF THE EEA JOINT COMMITTEE amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement
NO 140/2007-2007 DECISION OF THE EEA JOINT COMMITTEE amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement
NO 141/2007-2007 DECISION OF THE EEA JOINT COMMITTEE amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement
93/1999-1999 Decision of the EEA Joint Committee Amending Annex II (Technical Regulations, Standards, Testing and Certification) to the EEA Agreement
91/1999-1999 Decision of the EEA Joint Committee Amending Annex II (Technical Regulations, Standards, Testing and Certification) to the EEA Agreement
NO 335/2007-2007 COMMISSION REGULATION amending Regulation (EC) No 1702/2003 as regards the implementing rules related to environmental certification of aircraft and related products, parts and appliances
75/96-1996 Decision of the EEA Joint Committee Amending Annex II (Technical Regulations, Standards, Testing and Certification) to the EEA Agreement
88/665/EEC-1988 Council Directive Amending Several Directives Concerning the Approximation of the Laws of Member States Where There is Provision in Those Directives for Publication in the Official Journal of the European Communities of Attestations and Certificates

IT-UNI, About Method Validation and Method Validation

UNI ISO 21899:2021 Biotechnology -- Biobanking -- General requirements for the validation and verification of processing methods for biological material in biobanks
UNI EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results

国家市场监督管理总局、中国国家标准化管理委员会, About Method Validation and Method Validation

GB/T 5169.5-2020 Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance
GB/T 40080-2021 Nondestructive testing of steel tubes—Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness

European Committee for Electrotechnical Standardization（CENELEC）, About Method Validation and Method Validation

EN 60695-11-4:2011 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method

BELST, About Method Validation and Method Validation

STB 8081-2020 System for ensuring the uniformity of measurements of the Republic of Belarus Means of measuring the quality of electrical energy. Methods of verification
STB 8043-2014 System for ensuring the uniformity of measurements of the Republic of Belarus. Rail gages. Methods of verification
STB 8073-2018 System for ensuring the uniformity of measurements of the Republic of Belarus. Weights. Methods of verification
STB 8054-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Deflectometers. Methods of verification
STB 8055-2015 System for ensuring uniformity of measurements of the Republic of Belarus. Grammometers. Methods of verification
STB 8068-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Teslameters for constant magnetic fields. Methods of verification
STB 8034-2011 System for ensuring the uniformity of measurement of Belarus. Static uniaxial testing machines for tension, compression and bending. Verification methods
STB 8063-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Microlevels. Methods of verification
STB 8061-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Sciascopy rulers. Methods of verification
STB 8064-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Diaphragms mounted on pipelines to determine liquids and gases flow and quantity. Methods of verification
STB 8050-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Network equivalents. Methods of verification
STB 8078-2018 System for ensuring the uniformity of measurements of the Republic of Belarus. DC Kiloampermetr. Methods of verification
STB 8028-2006 System for ensuring the uniformity of measurements of the Republic of Belarus. Digital oscilloscopes. Methods of verification
STB 8053-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Desk ophthalmological perimeters. Methods of verification
STB 8041-2014 System for ensuring the uniformity of measurements of the Republic of Belarus. Sound calibrators. Methods of verification
STB 8084-2019 System for ensuring the uniformity of measurements of the Republic of Belarus. Measuring rulers, metal. Methods of verification
STB 8075-2018 System for ensuring the uniformity of measurements of the Republic of Belarus. Tone audiometers. Methods of verification
STB 8047-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Automatic level meters. Methods of verification
STB 8070-2017 System for ensuring the uniformity of measurements of the Republic of Belarus. The bomb calorimeters. The method of the verification
STB 8033-2009 System for ensuring the uniformity of measurement of Belarus. Alternating current static meters for active energy. Methods of verification
STB 8039-2014 System for ensuring the uniformity of measurements of the Republic of Belarus. Sets of platinum resistance thermotransducers for heat meters. Methods of verification
STB 8051-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Radio-interference meters. Methods of verification
STB 8082-2020 System for ensuring the uniformity of measurements of the Republic of Belarus. Multifunction calibrators. Methods of verification
STB 8089-2021 System for ensuring the uniformity of measurements of the Republic of Belarus. Bimetal thermometers. Methods of verification
STB 8052-2015 System for ensuring uniformity of measurements of the Republic of Belarus. Wooden and metallic bar standards. Methods of verification
STB 8072-2018 System for ensuring the uniformity of measurements of the Republic of Belarus. Levels optical and leveling rod. Methods of verification
STB 8038-2014 System for ensuring theuniformity of measurements of the Republic of Belarus. Electronic frequency counters. Methods of verification
STB 8069-2017 System for ensuring the uniformity of measurements of the Republic of Belarus. Measuring pressure transducers. The method of the verification
STB 8067-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Gamma radiation energy spectrometers. Methods of verification
STB 8049-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Dipole measuring antennas. Methods of verification
STB 8044-2016 System for ensuring the uniformity of measurements of the Republic of Belarus. High-voltage measuring (test) installations. Methods of verification
STB 8048-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Analyzers of consecutive action spectrum. Methods of verification
STB 8046-2015 System for ensuring uniformity of measurements of the Republic of Belarus. Meters for cold potable water and hot water. Methods of verification
STB 8066-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Alpha spectrometers with semiconductor detectors. Methods of verification
STB 8087-2021 System for ensuring the uniformity of measurements of the Republic of Belarus. DC electricity meters of electric energy of direct current. Methods of verification
STB 8045-2016 System for ensuring the uniformity of measurements of the Republic of Belarus. Digital pressure measuring devices IPDZ. Methods of verification
STB 8059-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Reference photometric filament lamps and working light sources. Methods of verification
STB 2351-2013 System for ensuring the uniformity of measurements of the Republic of Belarus. Electric transducers. Direct current measuring shunts. Methods of verification
STB 8065-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Dosimeters and doserate meters of the photon radiation. Methods of verification
STB 2576-2020 System for ensuring the uniformity of measurements of the Republic of Belarus. Multiturn indicators with a scale division of 0.001 and 0.002 mm. Methods of verification
STB 8058-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Ultraviolet-visible-nearinfrared spectrophotometers. Methods of verification
STB 8037-2014 System for ensuring the uniformity of measurements of the Republic of Belarus. Digital devices and transducers for voltage, current and resistance measuring. General requirements for the methods of verification
STB 8085-2019 System for ensuring the uniformity of measurements of the Republic of Belarus. Temperature transducers with unified output signal. Methods of verification

RU-GOST R, About Method Validation and Method Validation

GOST 8.365-1979 State system of ensuring the unity of measurements. Coaxial loads. Methods and means of verification
GOST 33984.3-2017 Lifts. Rules and method of examination (test) and measurement by certification of safety device of lifts. Rules of sampling
GOST 8.645-2014 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the complex refractive index
GOST 33984.2-2016 Lifts. Rules and methods of examinations (tests) and measurements by certification. Rules of sampling
GOST 8.442-1981 State system for ensuring the uniformity of measurements. Moisture meters neutron. Methods and means of verification
GOST 8.492-1983 State system for ensuring the uniformity of measurements. Actual low precision of frequency. Methods and means of verification
PNST 158-2016 Conformity assessment in the field of use of nuclear energy. Methods of assessing the cost of product certification and inspection control
GOST 8.465-1982 State system of ensuring the unity of measurements. Actial frequency of limited accuracy. Methods and means of verification
GOST 8.342-1979 State system for ensuring the uniformity of measurements. Hole gauges graduated in 0,001 and 0,002mm. Methods and means of verifcation
GOST R 8.847-2013 State system for ensuring the uniformity of measurements. Ultrasonic pulse flaw detectors. Methods and means for verification
GOST 8.616-2013 State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification
GOST 8.620-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of particle filter penetration for respiratory protective devices. Verification method
GOST 8.619-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of breakthrough time for respiratory protective devices gas filters. Verification method
GOST 8.621-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of resistance to clogging for respiratory protective devices particle filters. Verification method
GOST ISO 3890-2-2013 Milk and milk products. Determination of residues of organochlorine compounds (pesticides). Part 2. Test methods for crude extract purification and confirmation
GOST 8.445-1981 State system for ensuring the uniformity of measurements. Standard means mesuring laser output average power. Methods and means for verification
GOST R 8.919-2016 State system for ensuring the uniformity of measurements. Reference systems for certification reference materials composition of magistral natural gas and substitute natural gas. The method of verification
GOST R 8.858-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring quantity of heat of solution and heat of reactions
GOST R 8.860-2013 State system for ensuring the uniformity of measurements. State verification schedule for noise spectral density means of measuring within the frequency range from 0,002 to 178,3 GHz
GOST 8.646-2015 State system for ensuring the uniformity of measurements. Automatic instruments for weighing road vehicles in motion and measuring axle loads. Methods of verification

US-CFR-file, About Method Validation and Method Validation

CFR 10-429.70-2014 Energy. Part429:Certification, compliance, and enforcement for consumer products and commercial and industrial equipment. SubpartB:Certification. Section429.70:Alternative methods for determining energy efficiency and energy use.
CFR 40-141.852-2014 Protection of Environment. Part141:National primary drinking water regulations. Section141.852:Analytical methods and laboratory certification.
CFR 10-429.70-2013 Energy.Part429:Certification, compliance, and enforcement for consumer products and commercial and industrial equipment. Section429.70:Alternative methods for determining energy efficiency and energy use.

IX-FAO, About Method Validation and Method Validation

CAC/GL 60-2006(Ch) Guidelines for the use of traceability/product tracing methods in food inspection and certification systems
CAC/GL 60-2006(En) Guidelines for the use of traceability/product tracing methods in food inspection and certification systems

BE-NBN, About Method Validation and Method Validation

NBN-ISO 4259:1993 Petroleum products. Determination and application of precision data in relation to methods of test
NBN C 06-301-1983

Society of Automotive Engineers (SAE), About Method Validation and Method Validation

SAE J912-2002 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
SAE J912-2023 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

ES-AENOR, About Method Validation and Method Validation

UNE 20-555 Pt.1-1985

European Telecommunications Standards Institute (ETSI), About Method Validation and Method Validation

ETSI TR 101 034-1997 Methods for Testing and Specification (MTS); Reports on Experiments in Validation Methodology; PISN Cordless Terminal Mobility Incoming Call Additional Network Feature (ANF-CTMI) (V1.1.1)

PL-PKN, About Method Validation and Method Validation

PN R55030-1987 Farm machines Test methods for teddy-rakes, teddersand rakes
PN-EN ISO 4259-3-2020-08 P Petroleum and related products--Precision of measurement methods and results--Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
PN-EN ISO 12960-2020-11 E Geotextiles and geotextile-related products - Screening test methods for determining the resistance to acid and alkaline liquids (ISO 12960:2020)
PN-EN ISO 21187-2021-08 E Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
PN R55028-1991 Agricultural machinery. Test methods for spreaders of manure and other solid organic dungs
PN-EN 16990-2020-10 E Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use -- Side by Side Vehicles -- Safety requirements and test methods

IN-BIS, About Method Validation and Method Validation

Danish Standards Foundation, About Method Validation and Method Validation

DS/EN 12393-3:2009 Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests
DS/EN IEC 61318:2021 Live working – Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
DS/EN ISO 21187:2005 Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results
DS/ISO 3890-2:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 2: Test methods for crude extract purification and confirmation
DS/EN ISO 21187:2021 Milk – Quantitative determination of microbiological quality – Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
DS/ISO 21187:2021 Milk – Quantitative determination of microbiological quality – Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results

Lithuanian Standards Office , About Method Validation and Method Validation

LST EN 12393-3-2009 Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests
LST EN 27574-4-2002 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985)
LST EN 27574-2-2002 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines (ISO 7574-2:1985)
LST EN ISO 13438:2005 Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004)
LST EN 27574-3-2002 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985)
LST EN ISO 21187:2005 Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results (ISO 21187:2004)
LST EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)
LST EN 27574-1-2002 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions (ISO 7574-1:1985)

GOSTR, About Method Validation and Method Validation

GOST R 8.670-2009 State system for ensuring the uniformity of measurements. Precision inductive transducers for linear dimensions (parameters). Methods of verifications
PNST 436-2020 Smart manufacturing. Interoperability of capability units for manufacturing application solutions. Part 3. Verification and validation of interoperability among capability units

EU/EC - European Union/Commission Legislative Documents, About Method Validation and Method Validation

COM(2016) 599 FINAL-2016 REPORT FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT AND THE COUNCIL on the development@ validation and legal acceptance of methods alternative to animal testing in the field of cosmetics (2013-2015)

US-FCR, About Method Validation and Method Validation

FCR COE CRD-C 517-71-1971 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR VERIFYING MACHINES FOR USE IN FLEXURAL STRENGTH TESTS OF CONCRETE MATTRESSES
FCR COE CRD-C 516-71-1971 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR VERIFICATION OF COMPRESSION TESTING MACHINES USING CALIBRATED PROVING RINGS

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., About Method Validation and Method Validation

ASHRAE MN-00-7-2-2000 Experimental Procedure and Uncertainty Analysis of a Guarded Hotbox Method to Determine the Thermal Transmission Coefficient of Skylights and Sloped Glazing

Standard Association of Australia （SAA）, About Method Validation and Method Validation

AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of erosion
AS/NZS 1580.481.1.7:1998 Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of checking
AS/NZS 1580.481.1.5:1999 Paints and related materials - Methods of test - Coatings - Exposed to weathering - Change in gloss
AS/NZS 1580.107.8:1995 Paints and related materials - Methods of test - Application of paint at a nominated spreading rate by determination of wet film mass (brush application)

AT-ON, About Method Validation and Method Validation

OENORM EN ISO 4259-4:2021 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of Statistical Control Charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO/DIS 4259-4:2021)
OENORM EN ISO 21187:2021 Milk - Quantitative determination of microbiological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO 21187:2021)