ZH
RU
ES
what is infrared analysis
what is infrared analysis, Total:391 items.
In the international standard classification, what is infrared analysis involves: Analytical chemistry, Optics and optical measurements, Milk and milk products, Protection against fire, Standardization. General rules, Electricity. Magnetism. Electrical and magnetic measurements, Reinforced plastics, Lubricants, industrial oils and related products, Geology. Meteorology. Hydrology, Products of the textile industry, Electrical wires and cables, Fuels, Water quality, Farming and forestry, Ferroalloys, Ferrous metals, Construction materials, Products of the chemical industry, Testing of metals, Equipment for petroleum and natural gas industries, Non-ferrous metals, Coals, Nuclear energy engineering, Insulating fluids, Crude petroleum, Raw materials for rubber and plastics, Rubber and plastics products, Medical sciences and health care facilities in general, Semiconducting materials, Materials for aerospace construction, Burners. Boilers, Wastes, Metalliferous minerals, Power stations in general, Paints and varnishes, Paint ingredients, Tobacco, tobacco products and related equipment, Cereals, pulses and derived products, Seals, glands, Shafts and couplings, Beverages, Plastics, Structures of buildings, Petroleum products in general, Metrology and measurement in general, Air quality, Soil quality. Pedology, Powder metallurgy, Products of non-ferrous metals, Iron and steel products, Rubber, Non-metalliferous minerals, Waxes, bituminous materials and other petroleum products.
US-CFR-file, what is infrared analysis
- CFR 15-730.1-2014 Commerce and foreign trade. Part730:General information. Section730.1:What these regulations cover.
- CFR 30-585.102-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.102:What are BOEM's responsibilities under this part?
- CFR 30-585.640-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.640:What is a General Activities Plan (GAP)?
- CFR 41-102-42.10-2014 Public Contracts and Property Management. Part102-42:Utilization, donation, and disposal of foreign gifts and decorations. Section102-42.10:What definitions apply to this part?
- CFR 30-585.306-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.306:What action will BOEM take on my request?
- CFR 30-585.224-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.224:What happens if BOEM accepts my bid?
- CFR 30-585.601-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.601:When am I required to submit my plans to BOEM?
- CFR 50-23.23-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.23:What information is required on U.S. and foreign CITES documents?
- CFR 13-127.504-2013 Business Credit and Assistance. Part127:Women-owned small business federal contract program. Section127.504:What additional requirements must a concern satisfy to submit an offer on an EDWOSB or WOSB requirement?
- CFR 30-585.309-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.309:When will BOEM issue a noncompetitive ROW grant or RUE grant?
- CFR 30-585.503-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.503:What are the rent and operating fee requirements for a commercial lease?
- CFR 30-585.505-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.505:What are the rent and operating fee requirements for a limited lease?
- CFR 40-1065.250-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.250:Nondispersive infrared analyzer.
- CFR 2-180.500-2014 Grants and agreements. Part180:Omb guidelines to agencies on governmentwide debarment and suspension (nonprocurement). SubpartE:System for award management exclusions. Section180.500:What is the purpose of the System for Award Management Exclusions (SAM E
- CFR 2-180.515-2014 Grants and agreements. Part180:Omb guidelines to agencies on governmentwide debarment and suspension (nonprocurement). SubpartE:System for award management exclusions. Section180.515:What specific information is in SAM Exclusions?
- CFR 30-585.212-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.212:What is the process BOEM will follow if there is reason to believe that competitors have withdrawn before the Final Sale N
Taiwan Provincial Standard of the People's Republic of China, what is infrared analysis
Korean Agency for Technology and Standards (KATS), what is infrared analysis
- KS M 0024-1997 General rules for infrared spectrophotometric analysis
- KS M 0024-2017 General rules for infrared spectrophotometric analysis
- KS M 0024-1987 General rules for infrared spectrophotometric analysis
- KS M 0024-2017(2022) General rules for infrared spectrophotometric analysis
- KS I 2217-2009 Non-dispersive infrared gas analyzer
- KS M ISO 248-2:2014 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- KS H ISO 8454:2009 Cigarettes-Determination of carbon monoxide in the vapour phase of cigarette smoke-NDIR method
- KS D ISO 7526-2012(2017) Nickel, ferronickel and nickel alloys－Determination of sulfur content－Infra-red absorption method after induction furnace combustion
- KS D ISO 7524-2012(2017) Nickel, ferronickel and nickel alloys－Determination of carbon content－Infra-red absorption method after induction furnace combustion
- KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
Japanese Industrial Standards Committee (JISC), what is infrared analysis
- JIS K 0117:1990 General rules for infrared spectrophotometric analysis
- JIS K 0117:2017 General rules for infrared spectrophotometric analysis
- JIS K 0134:2002 General rules for near-infrared spectrophotometric analysis
- JIS K 0151:1983 Non-dispersive infrared gas analyzer
- JIS K 0117:2000 General rules for infrared spectrophotometric analysis
- JIS G 1239:2014 Iron and steel -- Determination of oxygen -- Infrared absorption method after fusion under inert gas
- JIS K 6238-2:2009 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric method using automatic analyzer with infrared drying
CZ-CSN, what is infrared analysis
国家市场监督管理总局、中国国家标准化管理委员会, what is infrared analysis
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, what is infrared analysis
- GB/T 6040-2002 General rules for infrared analysis
- GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
- GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
- GB/T 25929-2010 Specification of infrared gas analyzers
- GB/T 25930-2010 Test method of infrared gas analyzers
- GB/T 8705.1-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
- GB/T 8705.3-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
- GB/T 5687.8-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of sulfur content
- GB/T 4701.8-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of carbon content
- GB/T 5059.9-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of sulfur content
- GB/T 4333.10-1990 Methods for chemical analysis of ferrosilicon--The infrared absorption method for the determination of carbon content
- GB/T 7731.10-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content
- GB/T 5059.7-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of carbon content
- GB/T 4701.10-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of sulfur content
- GB/T 5687.5-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of carbon content
- GB/T 7731.12-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content
- GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
- GB/T 8654.10-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content
- GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
- GB/T 4702.16-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content
- GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- GB/T 4700.5-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method for the determination of carbon content
- GB/T 5686.5-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content
- GB/T 5686.7-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of sulfur content
- GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
- GB/T 4699.6-1988 Methods for chemical analysis of silicochromium--The infrared absorption method for the determination of sulfur content
- GB/T 4699.4-1988 Methods for chemical analysis of silicochromium The infrared absorption method for the determination of carbon content
- GB/T 12152-1989 Analysis of water used in boiler and cooling system--Determination of mineral oil--Infrared photometric method
- GB/T 6150.4-2008 Methods for chemical analysis of tungsten concentrates.Determination of sulfur content .The high frequency-infrared absorption method
- GB 8150.3-1987 Methods for chemical analysis of xanthates--The infrared drying method for determination of moisture and volatile matter content
- GB/T 14849.6-2014 Methods for chemical analysis of silicon metal.Part 6:Determination of carbon.Infrared absorption method
- GB/T 4324.27-2012 Methods for chemical analysis of tungsten.Part 27:Determination of carbon content.High frequency combustion -infrared absorption method
- GB/T 8647.9-1988 Nickel--Determination of sulphur content--Infra-red absorption method after high frequency induction furnace combustion
- GB/T 8647.10-1988 Nickel--Determination of carbon content--Infra-red absorption method after high frequency induction furnace combustion
- GB/T 26416.5-2010 Chemical analysis methods of dysprosium ferroalloy.Part 5: Determination of oxygen content.Impulse-infrared conductance absorption method
- GB/T 20975.26-2013 Methods for chemical analysis of aluminium and aluminium alloys.Part 26:Determination of carbon content.Infrared absorption method
- GB/T 20975.26-2013(英文版) Methods for chemical analysis of aluminium and aluminium alloys—Part 26：Determination of carbon content—Infrared absorption method
- GB/T 8704.1-1997 Methods for chemical analysis of ferrovandium. The infrared absorption method and the gasometric method for the determination of carbon content
- GB/T 7730.8-2000 Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of sulfur content
- GB/T 8647.8-2006 The methods for chemical analysis of nickel. Determination of sulphur content. Infra-red absorption method after high frequency induction furnace combustion
- GB/T 8647.9-2006 The methods for chemical analysis of nickel. Determination of carbon content. Infra-red absorption method after high frequency induction furnace combustion
- GB/T 7730.5-2000 Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of carbon content
- GB/T 4325.21-2013 Methods for chemical analysis of molybdenum.Part 21:Determination of carbon content and sulfur content.High frequency combustion-infrared absorption method
- GB/T 3260.9-2013 Methods for chemical analysis of tin.Part 9:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
- GB/T 26416.7-2023 Chemical Analysis Methods of Rare Earth Ferroalloys Part 7: Determination of Carbon and Sulfur Content by High Frequency-Infrared Absorption Method
- GB/T 26416.5-2022 Chemical analysis method for rare earth ferroalloy—Part 5: Determination of oxygen content—Impulse-infrared absorption method
- GB/T 4325.25-2013 Methods for chemical analysis of molybdenum.Part 25:Determination of hydrogen content.Inert gas fusion infrared absorption method/thermal conductivity method
- GB/T 8704.3-1997 Methods for chemical analysis of ferrovanadium. The infrared absorption method and the combustion neutralization titration method for the determination of sulfur content
- GB/T 4324.25-2012 Methods for chemical analysis of tungsten.Part 25:Determination of oxygen content.Pulse heating inert gas fusion -infrared absorption method
- GB/T 24895-2010 Inspection of grain and oils-General regulations for model authentication of near-infrared analysis and administration and maintenance of network
- GB/T 4324.23-2012 Methods for chemical analysis of tungsten.Part 23:Determination of sulfur content.The combustion-conductometric titration and high frequency combustion-infrared absorption method
- GB/T 4325.23-2013 Methods for chemical analysis of molybdenum.Part 23:Determination of oxygen and nitrogen contents.Inert gas fusion-infrared absorption and thermal conductivity method
- GB/T 4700.7-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method and the combustion-potassium iodate titration method for the determination of sulfur content
- GB/T 11261-1989 Methods for chemical analysis of high carbon chromium bearing steel--The pulse heating inert gas fusion-infra-red absorption method for the determination of oxygen content
- GB/T 1819.10-2004 Methods for chemical analysis of tin concentrates Determination of sulphur content-The high frequency infrared absorption method and the combustion potassium iodate titrimetric method
- GB/T 6150.4-2023 Methods of chemical analysis of tungsten concentrates-Part 4: Determination of sulfur content by high-frequency induction infrared absorption method and combustion-iodometric method
- GB/T 12690.1-2002 Chemical analysis methods for non-RE impurity of rare earth metals and their oxides-Determination of carbon and sulfur contents--High frequency-infrared absorption method
- GB/T 12690.13-1990 Neodymium and samarium--Determination of carbon content--High frequency--Infrared absorption method
RU-GOST R, what is infrared analysis
- GOST R 57986-2017 Polymer composites. Infrared spectroscopy. Near infrared qualitative analysis
- GOST R 57988-2017 Polymer composites. Thermogravimetric analysis coupled with analysis by infrared spectroscopy (TGA/IR)
- GOST R 57941-2017 Polymer composites. Infrared spectroscopy. Qualitative analysis
- GOST 31630-2012 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke using nondespersive infrared (NDIR) analyzer
- GOST R 8.593-2002 State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure
- GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
- GOST R ISO 19087-2021 Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
- GOST R 51358-2008 Cigarettes. Determination of carbon monoxide content in the vapour phase of cigarette smoke using nondespersive infrared (NDIR) analyzer
- GOST R 51358-1999 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke (NDIR method)
Professional Standard - Machinery, what is infrared analysis
Professional Standard - Commodity Inspection, what is infrared analysis
- SN/T 3914-2014 General rules for infrared spectrometer in minerals
- SN/T 3896.1-2014 Quantitative analysis of fiber in textiles for import and export.Near-infrared spectroscopy method.Part 1:Mixture of polyester fiber and cotton fiber
(U.S.) Ford Automotive Standards, what is infrared analysis
American Society for Testing and Materials (ASTM), what is infrared analysis
- ASTM E2105-00(2010) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
- ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
- ASTM E1655-00 Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM E1790-00 Standard Practice for Near Infrared Qualitative Analysis
- ASTM E1790-04 Standard Practice for Near Infrared Qualitative Analysis
- ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E1655-04 Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM E1655-05 Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM E1790-04(2016)e1 Standard Practice for Near Infrared Qualitative Analysis
- ASTM E334-96 Standard Practice for General Techniques of Infrared Microanalysis
- ASTM E334-01(2021) Standard Practice for General Techniques of Infrared Microanalysis
- ASTM E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis
- ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E2105-00(2005) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
- ASTM E2105-00 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
- ASTM E168-67(1977) Standard Recommended Practices for General Techniques Of Infrared Quantitative Analysis
- ASTM E168-16(2023) Standard Practices for General Techniques of Infrared Quantitative Analysis
- ASTM E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
- ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
- ASTM E334-01(2013) Standard Practice for General Techniques of Infrared Microanalysis
- ASTM E168-16 Standard Practices for General Techniques of Infrared Quantitative Analysis
- ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM E168-99 Standard Practices for General Techniques of Infrared Quantitative Analysis
- ASTM E334-01 Standard Practice for General Techniques of Infrared Microanalysis
- ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis
- ASTM E334-01(2007) Standard Practice for General Techniques of Infrared Microanalysis
- ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
- ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
- ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
- ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM UOP841-83 Trans Olefins in Fatty Acids, Esters or Triglycerides by IR Spectroscopy
- ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
- ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
- ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
- ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
- ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
- ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
- ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
- ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
- ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
- ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
Professional Standard - Electron, what is infrared analysis
- SJ/Z 9126-1987 Presentation for performances of air quality infra-red analyzers
- SJ 20744-1999 General rule of infrared absorption spectral analysis for the impurity concentration in semiconductor materials
IN-BIS, what is infrared analysis
未注明发布机构, what is infrared analysis
- BS 5849:1980(1999)*IEC 528:1975 Method of Expression of performance of air quality infra - red analysers [ IEC title : Expression of performance of air quality infra - red analyzers ]
- DIN EN 480-6:1997 Admixtures for concrete, mortar and grout — Test methods — Part 6: Infrared analysis
German Institute for Standardization, what is infrared analysis
- DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
- DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
- DIN EN 480-6:2023-01 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; German and English version prEN 480-6:2023 / Note: Date of issue 2022-12-09*Intended as replacement for DIN EN 480-6 (2005-12).
- DIN EN 480-6:2005-12 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; German version EN 480-6:2005 / Note: To be replaced by DIN EN 480-6 (2023-01).
- DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
- DIN EN 6042:2021-08 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy; German and English version prEN 6042:2021 / Note: Date of issue 2021-07-16
- DIN 55673:2000 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
- DIN 55673:2017 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
- DIN 55673:2017-04 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
- DIN EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; English version of DIN EN 480-6:2005
- DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
- DIN ISO 8454:2012 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009)
- DIN EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis; German version EN 1767:1999
- DIN 51451:2020-02 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
- DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
- DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
- DIN EN 480-6:2023 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; German and English version prEN 480-6:2023
- DIN EN 1767:1999-09 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis; German version EN 1767:1999
- DIN EN 10276-2:2003-10 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003
- DIN ISO 8454:2021 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009 + Amd.2:2019)
- DIN EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003
Professional Standard - Forestry, what is infrared analysis
- LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
- LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood
NO-SN, what is infrared analysis
- NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method
- NS 9804-1993 Water analysis. Determination of fat in wastewater from food processing industries. Infrared spectrophotometric method
Standard Association of Australia （SAA）, what is infrared analysis
- AS 1038.6.3.3:1997(R2013)
- AS 3587.5:1998 Ferroalloys - Chemical analysis - Determination of sulfur content - Infrared method
- AS 3587.4:1998 Ferroalloys - Chemical analysis - Determination of carbon content - Infrared method
- AS/NZS 1050.32:1994 Methods for the analysis of iron and steel - Determination of carbon content - Infrared method
- AS 1038.6.3.3:1997 Coal and coke - Analysis and testing - Higher rank coal - Ultimate analysis - Total sulfur - Infrared method
- AS/NZS 1050.16:1994 Methods for the analysis of iron and steel - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
International Electrotechnical Commission (IEC), what is infrared analysis
- IEC 60528:1975 Expression of performance of air quality infra-red analyzers
Professional Standard - Textile, what is infrared analysis
- FZ/T 01144-2018 Near Infrared Spectroscopy for Quantitative Analysis of Textile Fibers
Liaoning Provincial Standard of the People's Republic of China, what is infrared analysis
- DB21/T 2079-2013 Polyvinyl chloride (PVC) cable material analysis - infrared spectroscopy
British Standards Institution (BSI), what is infrared analysis
- BS 5849:1980 Method of expression of performance of air quality infra-red analysers
- BS 4314-1:1968 Specification for apparatus for physical methods of gas analysis - Infra-red gas analysers for industrial use
- 23/30462727 DC BS EN 480-6. Admixtures for concrete, mortar and grout. Test methods - Part 6. Infrared analysis
- BS EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
- BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
- 21/30437727 DC BS EN 6042. Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
- 18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
- BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
- BS 5202-16:1996 Methods for chemical analysis of tobacco and tobacco products - Determination of carbon monoxide in the vapour phase of cigarette smoke (NDIR method)
- BS ISO 19087:2018 Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
- BS EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
- DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
- BS 6200-3.28.2:1990 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphur. Steel and cast iron: infra-red absorption method after combustion in an induction furnace
- BS ISO 248-2:2019 Tracked Changes. Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
- BS EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas
- BS ISO 23506:2021 Workplace air. Analysis of airborne water immiscible mineral oil droplets and vapor with Fourier. Transform infrared spectroscopy
SE-SIS, what is infrared analysis
- SIS SS 02 81 45-1991 Determination ofoilin water — Infrared spectrophotometric method
- SIS SS IEC 528:1984 Electronic measuring equipment - Expression ofperformance of air quality infra-red analyzers
Association Francaise de Normalisation, what is infrared analysis
- NF X20-301:1978 Gas analysis by absorption of a non dispersive infra-red radiation beam.
- NF EN 480-6:2006 Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 6 : analyse infrarouge
- NF X20-361:1976 Gas analysis. Determination of carbon monoxide by absorption of a non dispersive infra-red radiation beam.
- NF P18-310-6*NF EN 480-6:2006 Admixtures for concrete, mortar and grout - Test methods - Part 6 : infrared analysis
- NF P18-315:1996 Admixtures for concrete, mortar and grout. Test methods. Part 6 : infrared analysis.
- NF V37-032:1996 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke. Ndir method.
- NF A06-726:1992 Analyse chimique du cuivre - Dosage du soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction.
- NF V37-032/A1*NF ISO 8454/A1:2013 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method - Amendment 1
- NF P18-926*NF EN 1767:1999 Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis
- NF ISO 19702:2016 Lignes directrices pour l'analyse des gaz et des vapeurs dans les effluents du feu par spectroscopie infrarouge à transformée de Fourier (IRTF)
- NF EN 1767:1999 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essais - Analyse par spectrométrie infrarouge
- NF A06-392-2*NF EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.
Group Standards of the People's Republic of China, what is infrared analysis
- T/CPCIF 0185-2022 Rapid analysis method of automobile diesel fuels— Near infrared spectrometry
- T/CPCIF 0184-2022 Rapid analysis method of motor vehicle gasoline— Near infrared spectrometry
- T/CPCIF 0186-2022 Rapid analysis method of motor vehicle ethanol gasoline（E10）— Near infrared spectrometry
- T/HBFIA 0020-2021 Rapid determination of indicators of Laobaigan-flavored fermented grains by near-infrared spectroscopic analysis
- T/CTES 1039-2021 Textiles-Test method for assessing the smoothness appearance of fabrics after laundering and drying-Infrared image analysis method
- T/QAS 081.1-2023 Chemical Analysis of Polymetallic Minerals Part 1: Determination of Carbon and Sulfur by High Frequency Combustion Infrared Absorption Method
- T/CSTM 00660.1-2023 Methods for chemical analysis of titanium carbide slag— Part 1:Determination of free carbon content—High frequency combustion with infrared absorption method
- T/CPCIF 0187-2022 Rapid analysis method of diesel engines NOx reduction agent- aqueous urea solution（AUS 32)—Near infrared spectrometry
- T/CWAN 0029.2-2021 Chemical analysis methods of nickel-based welding materials Part 2: Determination of carbon and sulfur content by infrared absorption method of high-frequency induction furnace combustion
AT-ON, what is infrared analysis
- ONORM M 6608-1996 Water analysis - Determination of hydrocarbons by infrared spectrometry
- OENORM EN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
Professional Standard - Agriculture, what is infrared analysis
- NY/T 1706-2009 Code of practice of risk analysis for alien insect.Rhynchophorus ferrugineus(Olivier)
IPC - Association Connecting Electronics Industries, what is infrared analysis
Professional Standard - Petroleum, what is infrared analysis
- SY/T 5121-1986 Infrared spectroscopic analysis method of rock organic matter and crude oil
国家能源局, what is infrared analysis
- NB/T 10162-2019 General technical conditions for infrared gas analyzers used in coal mines
- SY/T 5121-2021 Infrared spectroscopic analysis method of organic matter and crude oil in rocks
- SY/T 6679.4-2016 Comprehensive logging tool calibration method Part 4: Infrared gas analyzer
- SH/T 0931-2016 Fourier transform infrared spectroscopy (FT-IR) trend analysis method for monitoring the oxidation state of petroleum-based and hydrocarbon-based lubricants in use
- NB/SH/T 0998-2019 Fourier transform infrared spectroscopy (FT-IR) trend analysis method for monitoring the nitration status of petroleum-based and hydrocarbon-based lubricants in use
- SH/T 0935-2016 Fourier transform infrared spectroscopy (FT-IR) trend analysis method for monitoring the sulfonation state of petroleum-based and hydrocarbon-based lubricants in use
BE-NBN, what is infrared analysis
- NBN T 91-502-1977 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry
- NBN T 91-501-1975 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry
- NBN-EN 480-6-1991 Admixtures for concrete, mortar and grout - Test Methods - Part 6 : Infrared analysis
Indonesia Standards, what is infrared analysis
- SNI 06-2482-1991 Water, Test method for flouride content by spectrophotometer in a red alazaryn manuver
- SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers
GOSTR, what is infrared analysis
- GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis
Institute of Interconnecting and Packaging Electronic Circuits (IPC), what is infrared analysis
- IPC TM-650 2.3.39-2004 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision C
Lithuanian Standards Office , what is infrared analysis
- LST EN 480-6-2006 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
- LST EN 1767-2000 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
- LST EN 10276-2-2004 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
AENOR, what is infrared analysis
- UNE-EN 480-6:2006 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
- UNE-ISO 248-2:2013 Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- UNE-EN 1767:2000 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. INFRARED ANALYSIS.
- UNE-EN 10276-2:2004 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
Danish Standards Foundation, what is infrared analysis
- DS/EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
- DS/EN 1767:2000 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
- DS/CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
- DS/EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
Professional Standard - Ferrous Metallurgy, what is infrared analysis
- YB/T 5339-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- YB/T 5341-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Sulfur Content
- YB/T 191.7-2001 Methods for chemical analysis of chromium ores----The infrared absorption method for the determination of sulfur content
- YB/T 109.6-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the determination of carbon content
- YB/T 109.7-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the derermination of sulfur content
- YB/T 5316-2006 Calcium silicon alloy chemical analysis method Infrared absorption method for determination of carbon content
- YB/T 178.6-2000 Methods for chemical analysis silicon-aluminium alloy and silicon-barium-aluminium alloy.The infrared absorption method for the determination of carbon content
- YB/T 5317-2006 Calcium silicon alloy chemical analysis method infrared absorption method and combustion potassium iodate titration method for determination of sulfur content
- YB/T 190.7-2001 Methods for chemical analysis of continuous casting mold powder The gas-volumetric method after combustion and the infrared absorption method for the determination of carbon content
- YB/T 4419.1-2014 Metallized pellet by rotary hearth furnace.Determination of carbon and sulfur content.Infrared absorption method after combustion in an induction furnace
- YB/T 190.6-2001 Methods for chemical analysis of continuous casting mold powder The gas-volumetric method after combustion and the infrared absorption method for the determination of dissociation carbon content
Henan Provincial Standard of the People's Republic of China, what is infrared analysis
- DB41/T 1050-2015 Ferrosilicon Chemical Analysis Method Infrared Absorption Method for Determination of Sulfur Content
Professional Standard - Non-ferrous Metal, what is infrared analysis
- YS/T 514.3-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 3:Determination of sulfur content.High frequency infrared absorption method
- YS/T 514.10-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 10:Determination of carbon content.High frequency infrared absorption method
- YS/T 426.7-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of carbon content.High frequency-infrared absorption method
- YS/T 281.20-2011 Methods for chemical analysis of cobalt.Part 20：Determination of oxide content.Impulse infrared absorption
- YS/T 271.3-1994 Chemical Analysis Method of Xanthate Determination of Moisture and Volatile Content by Infrared Drying Method
- YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
- YS/T 281.14-1994 Cobalt - Determination of sulphur content - Infra-red absorption method after high frequency induction furnace combustion
- YS/T 281.15-1994 Cobalt - Determination of carbon content - Infra-red absorption method after high frequency induction furnace combustion
- YS/T 575.24-2009 Method for chemical analysis of aluminum ores.Part 24:Determination of carbon content and sulfur content.Infrared absorption method
- YS/T 710.3-2009 Method for chemical analysis of cobalt oxide.Part 3:Determination of sulphur content.High frequency combustion-infrared absorption method
- YS/T 1028.4-2015 Methods for chemical analysis of lithium iron phosphate.Part 4:Determination of carbon content.High frequency combustion with infrared absorption method
- YS/T 861.4-2013 Methods for chemical analysis of niobium-titanium alloy.Part 4:Determination of carbon content.The high-frequency infrared absorption method
- YS/T 281.13-2011 Methods for chemical analysis of cobalt.Part 13:Determination of sulphur content.Infra-red absorption method after high frequency induction furnace combustion
- YS/T 281.14-2011 Methods for chemical analysis of cobalt.Part 14:Determination of carbon content.Infra-red absorption method after high frequency induction furnace combustion
- YS/T 1075.7-2015 Methods for chemical analysis of vanadium-aluminium and molybdenum-aluminium master alloys.Part 7:Determination of oxygen content.Inert gas fusion-infrared method
- YS/T 1047.4-2015 Methods for chemical analysis of copper magnetite.Part 4:Determination of sulfur content.High frequency combustion with infrared absorption method
- YS/T 861.2-2013 Methods for chemical analysis of niobium-titanium alloy.Part 2:Determination of oxygen and nitrogen content.Inert gas fusion infrared/thermal conductivity method
- YS/T 904.5-2013 Methods for chemical analysis of iron-chromium-aluminum fiber.Part 5:Determination of carbon and sulfur content.High-frequency infrared absorption method
- YS/T 1605.12-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 12:Determination of carbon and sulfur contents — High frequency combustion infrared absorption method
- YS/T 1075.6-2015 Methods for chemical analysis of vanadium-aluminium and molybdenum-aluminium master alloys.Part 6:Determination of carbon content.High frequency combustion infrared absorption method
- YS/T 953.9-2014 Methods for chemical analysis of fire smelting nickel substrate material.Part 9:Determination of carbon and sulfur contents.Infrared absorption method after high frequency combustion
- YS/T 539.13-2009 Methods for chemical analysis of nickel base alloy powder.Part 13:Determination of oxygen content.The pulse heating inert gas fusion-infrared absorption method
National Metrological Verification Regulations of the People's Republic of China, what is infrared analysis
- JJG 635-2011 Verification Regulation of Carbon Monoxide and Carbon Dioxide Infrared Gas Analyzer
- JJG 635-1999 Verification Regulation of Monooxide and Carbon Diaxide Infrared Gas Analyzer
Professional Standard - Customs, what is infrared analysis
- HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer
Professional Standard - Nuclear Industry, what is infrared analysis
- EJ/T 746-1992 Infrared Absorption Method for Heavy Water Concentration Analysis in Primary Circuit of Heavy Water Research Reactor
- EJ/T 1212.10-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part10: Determination of carbon by high-frequency inductive combustion-infrared detection method
Ningxia Provincial Standard of the People's Republic of China, what is infrared analysis
- DB64/T 1554-2018 Fiber Quantitative Analysis of Cotton and Polyester Fiber Blended Products by Near Infrared Method
Professional Standard - Electricity, what is infrared analysis
- DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity
- DL/T 919-2005 Determination of mineral oil content in sulphur hexafluoride by infrared spectrum method
YU-JUS, what is infrared analysis
- JUS G.S1.510-1997 Plastics - Analysis of components in polyvinyl chloride) compounds - Infrared spectrofotometric method
European Committee for Standardization (CEN), what is infrared analysis
- prEN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
- EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
- EN 480-6:1996 Admixtures for Concrete, Mortar and Grout - Test Methods - Part 6: Infrared Analysis
- prEN 480-6-1991 Admixtures for concrete, mortar and grout; test methods; part 6: infrared analysis
- EN 1767:1999 Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Infrared Analysis
- PD CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, what is infrared analysis
- PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, what is infrared analysis
- GB/T 17923-2017 Analytical method for oily sewage from marine petroleum development industry—Infrared spectrophotometry
- GB/T 13747.24-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 24：Determination of carbon content—Infrared absorption method after high frequency combustion
- GB/T 10574.12-2017 Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method
- GB/T 13747.21-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 21：Determination of hydrogen content—Inert gas fusion-infrared absorption or thermal conductivity method
- GB/T 24131.2-2017 Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit
- GB/T 13747.22-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 22：Determination of oxygen and nitrogen contents—Inert gas fusion-infrared absorption and thermal conductivity method
工业和信息化部, what is infrared analysis
- YS/T 1230.4-2018 Methods for chemical analysis of copper anodes Part 4: Determination of oxygen content by pulsed infrared method
- YS/T 1550.4-2022 Methods for chemical analysis of beryllium alloys Part 4: Determination of carbon content by infrared absorption method
- YS/T 540.3-2018 Methods for chemical analysis of vanadium Part 3: Determination of carbon content High frequency combustion infrared absorption method
- YS/T 540.7-2018 Methods for chemical analysis of vanadium Part 7: Determination of oxygen content Inert gas fusion infrared absorption method
- YS/T 1550.5-2022 Methods for chemical analysis of beryllium alloys Part 5: Determination of oxygen content Inert gas fusion infrared absorption method
- YS/T 1562.4-2022 Methods for chemical analysis of tungsten-copper alloys Part 4: Determination of carbon content High-frequency combustion infrared absorption method
- YS/T 424.4-2022 Methods for chemical analysis of titanium diboride powder Part 4: Determination of carbon content High-frequency combustion infrared absorption method
- XB/T 622.6-2017 Methods for chemical analysis of rare earth hydrogen storage alloys Part 6: Determination of oxygen content Pulse heating infrared absorption method
- XB/T 622.5-2017 Methods for chemical analysis of rare earth hydrogen storage alloys Part 5: Determination of carbon content High frequency combustion infrared absorption method
- YS/T 1563.5-2022 Methods for chemical analysis of molybdenum-rhenium alloys Part 5: Determination of carbon and sulfur content High-frequency combustion infrared absorption method
- YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy
- YS/T 1057.5-2022 Methods for chemical analysis of cobalt tetroxide Part 5: Determination of carbon content High-frequency combustion-infrared absorption spectrometry
- YS/T 1585.4-2022 Methods for chemical analysis of silver-tungsten alloys Part 4: Determination of carbon content High-frequency induction furnace combustion infrared absorption method
- YS/T 1525-2022 Chemical analysis methods for nickel-platinum alloys, determination of oxygen and nitrogen content, pulse-infrared absorption method and thermal conductivity detection method
- YS/T 1509.2-2021 Chemical analysis method of silicon-carbon composite anode materials Part 2: Determination of carbon content High-frequency heating infrared absorption method
- YS/T 1489.7-2021 Methods for chemical analysis of cobalt-chromium-tungsten alloy powders Part 7: Determination of carbon content High-frequency combustion infrared absorption method
- YS/T 424.5-2022 Methods for chemical analysis of titanium diboride powder Part 5: Determination of oxygen content Pulse heating inert gas melting-infrared absorption method
- YS/T 1563.7-2022 Methods for chemical analysis of molybdenum-rhenium alloys Part 7: Determination of hydrogen content Inert gas melting-infrared absorption method and thermal conductivity method
NL-NEN, what is infrared analysis
- NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry
National Metrological Technical Specifications of the People's Republic of China, what is infrared analysis
- JJF 1523-2015 Program of Pattern Evaluation of Carbon Monoxide and Carbon Dioxide Infrared Gas Analyzers
International Organization for Standardization (ISO), what is infrared analysis
- ISO 8454:1987 Cigarettes; Determination of carbon monoxide in the vapour phase of smoke (NDIR method)
- ISO 8454:1995 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method
- ISO 8454:2007 Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method
- ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- ISO 19087:2018 Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
- ISO/DIS 19702:2023 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
VN-TCVN, what is infrared analysis
- TCVN 6678-2000 Cigarettes.Determination of carbon monooxide in the vapour phase of cigarettes smoke.NDIR method
Professional Standard - Rare Earth, what is infrared analysis
- XB/T 614.3-2011 Chemical analysis method of gadolinium-magnesium alloy.Part 3:Determination of carbon content.High frequency-infrared absorption method
- XB/T 617.6-2014 Chemical analysis methods of neodymium iron boron alloy.Part 6:Determination of carbon content.High frequency-infrared absorption method
- XB/T 610.3-2015 Chemical analysis methods for samarium-cobalt permanent magnet alloy.Part 3: Determination of oxygen content.Impulse-infrared absorption method
- XB/T 601.9-1993 Lanthanum hexaboride chemical analysis method Determination of carbon content by high frequency induction combustion infrared absorption method
- XB/T 610.3-2007 Chemical analysis methods for samarium cobalt permanent magnet alloy powder- Determination of oxygen content- Impulse-infrared absorption method
- XB/T 601.4-2008 Chemical analysis methods of lanthanum boride.Determination of carbon content.High frequency induced combustion infrared ray absorbs method
- XB/T 617.7-2014 Chemical analysis methods for neodymium iron boron alloy.Part 7:Determination of oxygen and nitrogen contents.Impulse-infrared and impulse-thermal conductance absorption method
European Association of Aerospace Industries, what is infrared analysis
- AECMA PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy Edition P1
Professional Standard - Aviation, what is infrared analysis
- HB 5297.24-2001 Determination of Oxygen and Nitrogen Content by Pulse Heating Infrared Thermal Conductivity Method for Chemical Analysis of Titanium Alloy
- HB 5297.22-2001 Titanium Alloy Chemical Analysis Method High Frequency Induction Heating-Infrared Absorption Method Determination of Carbon Content
- HB 5220.49-2008 Methods for chemical analysis of superalloys. Part 49: Determination of oxygen, nitrogen content by impulse heating-infrared, thermal conductivity method
- HB 5220.3-1995 High-frequency Induction Heating-Infrared Absorption Method for Chemical Analysis of Superalloys Determination of Carbon Content
- HB 5220.6-1995 High-frequency induction heating-infrared absorption method for chemical analysis of superalloys Determination of sulfur content
- HB 5220.3-2008 Methods for chemical analysis of super alloys. Part 3: Determination of carbon content by high frequency induction combustion-infrared absorption method
- HB 5220.6-2008 Methods for chemical analysis of superalloys.Part 6:Determination of sulfur content by high frequency induction combustion-infrared absorption method
Aerospace, Security and Defence Industries Association of Europe (ASD), what is infrared analysis
- ASD-STAN PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)
国家文物局, what is infrared analysis
- WW/T 0087-2018 Determination of aging degree of silk fabrics in collections using Fourier transform infrared spectroscopic analysis
Professional Standard - Petrochemical Industry, what is infrared analysis
- NB/SH/T 0853-2010 Standard practice for condition monitoring of used lubricants by trend analysis using fourier transform infrared(FT-IR)spectrometry
US-ACEI, what is infrared analysis
- IPC TM-650 2.3.39-1997 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision B(Test Methods Manual)
Professional Standard - Geology, what is infrared analysis
- DZ/T 0279.25-2016 Methods of Analysis of Regional Geochemical Samples Part 25: Combustion for Carbon Determination - Infrared Absorption Spectroscopy
海关总署, what is infrared analysis
- SN/T 3896.8-2020 Quantitative Analysis of Textile Fibers for Import and Export by Near Infrared Method Part 8: Mixtures of Cotton and Polyamide
- SN/T 3896.7-2020 Quantitative Analysis of Textile Fibers for Import and Export by Near Infrared Method Part 7: Mixtures of Polyester Fibers and Polyamide Fibers
Jiangxi Provincial Standard of the People's Republic of China, what is infrared analysis
- DB36/T 815-2014 Determination of Hydrogen Content by Pulse Heating-Infrared Absorption Method for Chemical Analysis of SmCo Permanent Magnetic Alloy Powder
U.S. Air Force, what is infrared analysis
国家质量监督检验检疫总局, what is infrared analysis
- SN/T 3896.6-2017 Quantitative Analysis of Textile Fibers for Import and Export by Near Infrared Method Part 6: Mixtures of Polyester Fiber and Wool
- SN/T 3896.5-2015 Quantitative Analysis of Imported and Exported Textile Fibers by Near Infrared Method Part 5: Mixtures of Polyester Fibers and Viscose Fibers
- SN/T 3896.4-2015 Quantitative Analysis of Imported and Exported Textile Fibers by Near Infrared Method Part 4: Mixtures of Cotton and Polyurethane Elastic Fibers
Society of Automotive Engineers (SAE), what is infrared analysis
- SAE AIR5917-2020 Procedure for Measurement of Gaseous Emissions from Aircraft Gas Turbine Engines Using Fourier Transform Infrared Analysis
Qinghai Provincial Standard of the People's Republic of China, what is infrared analysis
- DB63/T 1612-2017 Chemical analysis method for fixed carbon in carbonate-containing graphite ore Nitric acid treatment High-frequency infrared carbon-sulfur analyzer method
Professional Standard - Energy, what is infrared analysis
- NB/SH/T 0935-2016 Fourier Transform Infrared Spectroscopy (FT-IR) Trend Analysis Method for Monitoring Sulfonation Status of Petroleum- and Hydrocarbon-Based Lubricants
- NB/SH/T 0931-2016 Fourier Transform Infrared Spectroscopy (FT-IR) Trend Analysis in Oxidation State Monitoring of Petroleum- and Hydrocarbon-Based Lubricants