ZH
RU
ES
Gel column + column
Gel column + column, Total:455 items.
In the international standard classification, Gel column + column involves: Construction materials, Road engineering, Construction technology, Optics and optical measurements, Laboratory medicine, Products of non-ferrous metals, Products of the chemical industry, Structures of buildings, Pipeline components and pipelines, Electric traction equipment, Sterilization and disinfection, Rubber and plastics products, Bridge construction, Civil engineering in general, Road vehicle systems, Protective equipment, Construction industry, Commercial vehicles, Gears, Fasteners, Rubber, Protection of and in buildings, Construction of railways, External water conveyance systems, Iron and steel products, Equipment for the rubber and plastics industries, Elements of buildings, Construction equipment, Raw materials for rubber and plastics, Protection against fire, Adhesives, Aerosol containers, Tyres, Burners. Boilers.
BR-ABNT, Gel column + column
US-FCR, Gel column + column
Group Standards of the People's Republic of China, Gel column + column
- T/ZJCX 0007-2022 Precast Concrete Column
- T/YYHG 0003-2022 Silica-Based Reversed-Phase Columns
- T/ZZB 1088-2019 Partially encased composite column
- T/CECS 188-2019 Technical specification for steel tube-reinforced concrete column structures
- T/CSCS 14-2021 Technical Standards for Structural Steel Concrete Special-shaped Columns
- T/CECS 1123-2022 Technical specification for composite structure of steel-clad concrete beam-concrete-filled steel tube column
- T/CECS 991-2022 Structural technical specification for slab-type concrete-filled steel tube composite columns
- T/CECS 825-2021 Technical specification for rectangular steel tube concrete composite special-shaped column structure
- T/CECS 478-2018 Technical specification for seismic isolation of concrete-filled steel tube column bearings for masonry buildings
- T/CECS 908-2021 Technical specification for application of composite structure of concrete special-shaped column-steel wire grid insulation wall
CZ-CSN, Gel column + column
Association Francaise de Normalisation, Gel column + column
- NF P97-408:1982 Lighting columns. Special requirements for reinforced and prestressed concrete lighting columns.
- NF P97-412*NF EN 40-4:2006 Lighting columns - Part 4 : requirements for reinforced and prestressed concrete lighting columns
- NF P18-400:1981 Concretes. Moulds for cylindrical and prismatic test specimens.
- NF EN 12843:2005 Produits préfabriqués en béton - Mâts et poteaux
- NF EN 12348/IN1:2009 Foreuses à béton (carotteuses) sur colonne - Sécurité
- NF EN 12348+A1:2009 Foreuses à béton (carotteuses) sur colonne - Sécurité
- NF P41-402*NF EN 641:1995 Reinforced concrete pressure pipes, cylinder type, including joints and fittings.
- NF P41-401*NF EN 640:1995 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings.
- NF P41-403*NF EN 642:1995 Prestressed concrete pressure pipes, cylcinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes.
- NF T46-012*NF ISO 4649:2018 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
- NF T46-012:1984 Vulcanized or thermoplastic rubber. Determination of abrasion resistance using a rotating cylindrical drum device.
- NF T47-404-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2 : Shore-type durometer method.
- NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
- NF T46-044:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (cylindrical test-pieces).
- NF EN 14869-1:2011 Adhésifs structuraux - Détermination du comportement en cisaillement des adhésifs structuraux - Partie 1 : méthode d'essai en torsion de cylindres creux collés bout à bout
- NF P92-140-6*NF EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members - Part 6 : applied protection to concrete filled hollow steel columns
HU-MSZT, Gel column + column
British Standards Institution (BSI), Gel column + column
- BS EN 40-4:2006 Lighting columns - Requirements for reinforced and prestressed concrete lighting columns
- BS EN 40-4:2005 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
- BS EN 642:1995 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
- BS EN 641:1995 Reinforced concrete pressure pipes, cylinder type, including joints and fittings
- BS ISO 7267-1:2009 Rubber-covered rollers. Determination of apparent hardness. IRHD method
- BS ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - IRHD method
- BS ISO 7267-1:2017 Rubber-covered rollers. Determination of apparent hardness. IRHD method
- BS ISO 7267-2:2009 Rubber-covered rollers. Determination of apparent hardness. Shore-type durometer method
- BS ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Shore-type durometer method
- BS ISO 7267-3:2011 Rubber-covered rollers. Determination of apparent hardness. Pusey and Jones method
- BS ISO 7267-3:2017 Rubber-covered rollers. Determination of apparent hardness. Pusey and Jones method
- BS EN 640:1995 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
- BS DD CEN/TS 1992-4-5:2009 Design of fastenings for use in concrete - Part 4-5:Post-installed fasteners - Chemical systems
- 22/30429371 DC BS EN 13863-6. Concrete pavements - Part 6. Test method for the determination of the splitting tensile strength of concrete on cylindrical discs
- BS DD ENV 13381-6:2002 Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete filled hollow steel columns
- BS EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete filled hollow steel columns
- BS 8110-3:1985 Structural use of concrete - Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns
- BS EN 14869-1:2004 Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
- BS ISO 24070-2:2021 Building and civil engineering sealants. Determination of cured thickness of one-component sealant - Cylindrical cup test method
- BS ISO 11003-1:2019 Adhesives. Determination of shear behaviour of structural adhesives - Torsion test method using butt-bonded hollow cylinders
Henan Provincial Standard of the People's Republic of China, Gel column + column
- DB41/T 1288-2016 Corrugated steel guardrail vulcanized rubber column reflective column cap
TR-TSE, Gel column + column
- TS 997-1971 CONCRETE POLES OR ELECTRICAL TRANSMISSION AND TRACTION SYSTEMS)
- TS 3129-1978 Splitting Tensile Strength Of Cylindrical Concrete Specimens
Taiwan Provincial Standard of the People's Republic of China, Gel column + column
- CNS 10991-1984 Molds for Forming Concrete Test Cylinders Vertically
- CNS 11297-2005 Method of capping cylindrical concrete specimens
- CNS 10992-1984 Methods of Test for Molds for Forming Concrete Test Culinders Vertically
- CNS 1232-2002 Method of test for compressive strength of cylindrical concrete specimens
- CNS 3801-1985 Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
- CNS 4689-1995 Studs for Drawn Arc Stud Welding Concrete Anchor and Shear Connectors
- CNS 13620-1995 Method of Test for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates(Rock Cylinder Method)
Professional Standard - Aerospace, Gel column + column
European Committee for Standardization (CEN), Gel column + column
- prEN 40-9-1991 Lighting columns; part 9: special requirements for reinforced and prestressed concrete lighting columns
- EN 12843:2004 Precast concrete products - Masts and poles
- EN 40-9:1982 Lighting Columns - Part 9: Special Requirements for Reinforced and Prestressed Concrete Lighting Columns
- EN 642:1994 Prestressed concrete pressure pipes, cylinder and non-cylinder type, including joints, fittings and specific requirement for prestressing steel for pipes
- prEN 641-1992 Reinforced concrete pressure pipes cylinder type, including joints and fittings
- prEN 640-1992 Reinforced concrete pressure pipes non-cylinder type, including joints and fittings
- prEN 642-1992 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
- EN 640:1994 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
- prEN 668-1992 Rubber floor coverings; determination of abrasion resistance using a rotating cylindrical drum device and non-rotating sample holder
- EN 1771:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test
CU-NC, Gel column + column
- NC 54-309-1985 Construction Materials and Products. Precast Concrete Columns and Footstalls Quality Specifications
- NC 54-295-1984 Construction Materials and Products Concrete Posts for Electical Transmiasion Aerial Lines. Quality Specifications
- NC 54-211-1986 Construction Materials and Products. Pressure SteelCylinder-Type Concrete Pipe. Quality Specifications
Danish Standards Foundation, Gel column + column
- DS/EN 40-4/AC:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
- DS/EN 40-4:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
- DS 423.35:1995 Testing of concrete - Hardened concrete - Differences of weight between top and bottom of concrete cylinders
- DS/EN 642:1995 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
- DS 423.34:1985 Testing of concrete. Tensile strength deduced from splitting test on cylindrical specimens
- DS/EN 640:1995 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
Lithuanian Standards Office , Gel column + column
- LST EN 40-4-2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
- LST EN 40-4-2006/AC-2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
- LST EN 642-2000 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
- LST EN 640-2000 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
AENOR, Gel column + column
- UNE-EN 40-4:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
- UNE-EN 641:1995 REINFORCED CONCRETE PRESSURE PIPES, CYLINDER TYPE, INCLUDING JOINTS AND FITTINGS.
German Institute for Standardization, Gel column + column
- DIN EN 40-4:2006-06 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005
- DIN EN 40-4 Berichtigung 1:2008-05 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005; Corrigenda to DIN EN 40-4:2006-06, German version EN 40-4:2005/AC:2006
- DIN EN 12843:2004 Precast concrete products - Masts and poles; German version EN 12843:2004
- DIN EN 40-4 Berichtigung 1:2008 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005; Corrigenda to DIN EN 40-4:2006-06, German version EN 40-4:2005/AC:2006
- DIN 53531-2:1990 Determination of the adhesion of rubber to rigid materials using conical ended cylinders
- DIN 267-27:1990 Fasteners; adhesive-coated steel screws, bolts and studs; technical delivery conditions
- DIN EN 13863-6:2022-02 Concrete pavements - Part 6: Test method for the determination of the splitting tensile strength of concrete on cylindrical discs; German and English version prEN 13863-6:2022 / Note: Date of issue 2022-01-07
- DIN ISO 4649:2020 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2017); Text in German and English
- DIN EN 13863-6:2022 Concrete pavements - Part 6: Test method for the determination of the splitting tensile strength of concrete on cylindrical discs; German and English version prEN 13863-6:2022
- DIN 55502-1:1987 Metal packages; three-piece tin-plate or black-plate cylindrical, straight-sided aerosol cans
- DIN EN 13381-6:2012-09 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns; German version EN 13381-6:2012
- DIN EN 1771:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test; German version EN 1771:2004
- DIN 55502-3:1987 Metal packages; three-piece tin-plate or black-plate, cylindrical, necked-in aerosol cans
United States Navy, Gel column + column
IN-BIS, Gel column + column
SE-SIS, Gel column + column
American Water Works Association (AWWA), Gel column + column
国家药监局, Gel column + column
- YY/T 1669-2019 ABO anti-typing test card (column agglutination method)
- YY/T 1883-2023 Rh blood group C, c, E, e antigen test card (column agglutination method)
ACI - American Concrete Institute, Gel column + column
- ACI SP-293 CD-2013 Reinforced Concrete Columns with High Strength Concrete and Steel Reinforcement
- ACI 441R-1996 High-Strength Concrete Columns: State of the Art
- ACI 352.1R-2011 Guide for Design of Slab-Column Connections in Monolithic Concrete Structures
- ACI 352R-1991 Recommendations for Design of Beam-Column Joints in Monolithic Reinforced Concrete Structures
- ACI 441.1R-2018 Report on Equivalent Rectangular Concrete Stress Block and Transverse Reinforcement for High- Strength Concrete Columns
- ACI 352RS-2002 Recomendaciones para el Dise?o de Conexiones Viga-Columna en Estructuras Monolíticas de Concreto Reforzado
YU-JUS, Gel column + column
- JUS EN 40-9-1992 Lighting columns. Part 9: Specification of special requirements for reinforced and prestressed concrete lighting columns
- JUS B.M3.022-1980 Support of mine openings. Trapezoidal reinforced concrete mine props. Dimensions
- JUS Z.B1.500-2003 Safety equipment Climbing iron for square concrete columns Requirements and test methods
- JUS B.M3.023-1980 Support of mine openings. Trough-shaped reinforced concrete mine props. Dimensions
- JUS B.M3.021-1980 Support of mine openings. Rectangular reinforced concrete mineprops. Dimensions
- JUS B.M3.020-1980 Support of mine openings. Reinforced concrete mine props. Technical requirements for manufacturing and deliverv
Professional Standard - Aviation, Gel column + column
- HB 6770-1993 One-component cylinder-mounted anaerobic adhesive
- HB/Z 84.4-1984 Calculation of Bonded Bearing Capacity of Aeronautical Involute Cylindrical Gears
- HB 7762-2005 Specification for master alloys of directionally solidified and single crystal superalloys for aeroengines
Professional Standard - Military and Civilian Products, Gel column + column
工业和信息化部, Gel column + column
VE-FONDONORMA, Gel column + column
Korean Agency for Technology and Standards (KATS), Gel column + column
- KS F 2801-2011 Mold for forming concrete test cylinders vertically
- KS F 2801-1986 Mold for forming concrete test cylinders vertically
- KS F 2801-2011(2016) Mold for forming concrete test cylinders vertically
- KS F 2438-2002 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-1982 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS M ISO 7267-1:2010 Rubber-covered rollers－Determination of apparent hardness－Part 1：IRHD method
- KS F 2431-2011(2016) Standard test method for compressive strength of molded prepacked concrete cylinders
- KS M ISO 7267-2:2010 Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method
- KS F 2438-2017 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-2017(2022) Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2547-2017(2022) Testing method for potential alkali reactivity of carbonate rocks for concrete aggregates(rock cylinder method)
- KS F 1611-3-2013(2018) Fire resistance performance for elements of building construction ― Part 3: Beams and columns made of structural glued laminated timber
- KS M ISO 10500-2007(2017) Industrial tyres and rims－Cylindrical and conical base rubber solid tyres(metric series)－Designation, dimensions and marking
- KS M ISO 10500-2007(2022) Industrial tyres and rims－Cylindrical and conical base rubber solid tyres(metric series)－Designation, dimensions and marking
Professional Standard - Construction Industry, Gel column + column
- JGJ 149-2017 Technical specification for concrete structures with specially shaped columns
- JGJ 149-2006 Technical specification for concrete structures with specially shaped columns
- JGJ 149-2006（条文说明） Technical specification for concrete structures with specially shaped columns(explanation)
- JGJ/T 13-1994 Aseismic technical specification for multi-storey masonry building with reinforced concrete tie column
- JGJ/T 13-1994（条文说明） Seismic technical specification for multistory masonry buildings with reinforced concrete tie columns
Professional Standard - Medicine, Gel column + column
FI-SFS, Gel column + column
UY-UNIT, Gel column + column
American National Standards Institute （ANSI), Gel column + column
Professional Standard - Railway, Gel column + column
- TB/T 2286.2-2008 Prestressed concrete pole for overhead contact system of electrified railway. Part 2: Circular pole
- TB/T 2286.2-2015 Prestressed concrete pole for overhead contact system of electrified railway.Part 2: Circular pole
- TB/T 2286.1-2015 Prestressed concrete pole for overhead contact system of electrified railway.Part 1: Acrossed-webmember pole
- TB/T 2286.1-2008 Prestressed concrete pole for overhead contact system of electrified railway. Part 1: Acrossed-webmember pole
- TB/T 2287-1997 Circular Equal Diameter Prestressed Concrete Catenary Pillar
- TB/T 2286-2003 Prestressed concrete pole with acrossed-webmember for electrization railway
- TB/T 2287-2005 Circular prestressed concrete pole for overhead contact system of electrified railway
- TB/T 2922.4-1998 Test method for alkali activity of aggregates used in railway concrete - rock column method
未注明发布机构, Gel column + column
- BS 5649-9:1982(1999)*EN 40-9 Lighting columns — Part 9 : Specification of special requirements for reinforced and prestressed concrete lighting columns
- BS 1881-110:1983(1998) Testing concrete — Part 110 : Method for making test cylinders from fresh concrete
- BS 8110-3:1985(1998) Structural use of concrete — Part 3 : Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns
American Society for Testing and Materials (ASTM), Gel column + column
- ASTM E1482-23 Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
- ASTM E1482-12(2017) Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
- ASTM E1482-12 Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
- ASTM C873/C873M-23 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C617-09 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM A1044/A1044M-22 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM C1768/C1768M-12(2017) Standard Practice for Accelerated Curing of Concrete Cylinders
- ASTM C470/C470M-09 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM C873-04 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C873-99 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C873/C873M-04e1 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C873/C873M-15 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C617-98(2003) Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C617-98 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C1610/C1610M-19 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C1610/C1610M-06a Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C39/C39M-20 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-17a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-12 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-11a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-01 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-99 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-05e1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-05 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-03 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-04 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-04a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM A1044/A1044M-22a Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM C39/C39M-21 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-05e2 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-09 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-15 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-16a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-16b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM A1044/A1044M-16a Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM C617/C617M-23 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM A1044/A1044M-05 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM A1044/A1044M-05(2010) Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM C617-10 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM A1044/A1044M-16ae1 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM C617/C617M-11 Standard Practice for
Capping Cylindrical Concrete Specimens - ASTM A1044/A1044M-15 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM A1044/A1044M-16 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM C617-09a Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C39/C39M-11 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-12a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C617/C617M-12 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C39/C39M-18 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-14 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-15a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-16 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-17b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C617/C617M-15 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C470/C470M-23 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM C1330-02(2007) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
- ASTM C1330-02 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
- ASTM C1330-96 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
- ASTM C1330-02(2013) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
- ASTM C470/C470M-02 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM C470/C470M-02a Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM C470/C470M-98 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM C470/C470M-08 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM C39/C39M-10 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-17 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-09a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C470/C470M-15 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM C943-02 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
- ASTM C943-96 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
- ASTM C496-96 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C496/C496M-04e1 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C496/C496M-02 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C496/C496M-04 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C1610/C1610M-10 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C496/C496M-11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C496/C496M-17 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C1610/C1610M-14 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C1610/C1610M-06 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C1610/C1610M-21 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C1231/C1231M-14 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
- ASTM C1435-99 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
- ASTM C1552-08a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1552-09 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1435/C1435M-08 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
- ASTM C1552-08 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1552-16 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1716/C1716M-12 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1716/C1716M-16 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1716/C1716M-14 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C827-01a Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C827-01 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C827-01a(2005) Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C1330-18 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
- ASTM C1552-03a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1552-03 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1552-07 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1716/C1716M-10 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1716/C1716M-18a Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1716/C1716M-18 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1716/C1716M-19 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1716/C1716M-20 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C586-11 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
- ASTM C1716/C1716M-21 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1716/C1716M-11 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
- ASTM C1552-14a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1552-15 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1610/C1610M-17 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C1552-12 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C827/C827M-10 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C586-99 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method)
- ASTM C586-05 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
- ASTM C873/C873M-10 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C873/C873M-10a Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C1231/C1231M-23 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
- ASTM C1552-02 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1231/C1231M-07 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
- ASTM C1231/C1231M-00e1 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
- ASTM C1231/C1231M-06 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
- ASTM C1552-09a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1231/C1231M-15 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
- ASTM C1552-14 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM C1231/C1231M-08a Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
- ASTM C1231/C1231M-09 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
- ASTM C1552-23 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
- ASTM D4827-93(1998) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
- ASTM D4827-03(2022) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
- ASTM D4827-03(2015) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
- ASTM D4827-03 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
- ASTM D6078-04(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
RU-GOST R, Gel column + column
- GOST 18979-2014 Reinforced concrete columns for multistory buildings. Specification
- GOST 25628.1-2016 Reinforced concrete columns for single-storey industrial buildings. Specifications
- GOST 18979-1990 Reinforced concrete columns for multi-storey buildings. Specifications
- GOST 25628-1990 Reinforced concrete columns for single-storey industrial buildings. Specifications
- GOST 23899-1979 Column reinforced concrete for parabolic shoots. Specifications
- GOST 24022-1980 Precast reinforced concrete foundations for columns of agricultural buildings. Specifications
- GOST 19330-1999 Centrifugal reinforced concrete posts for railway overhead line equipment. Specifications
- GOST R 55740-2013 Steel bolts, screws and studs with adhesive coating. Technical requirements
- GOST 25628.2-2016 Reinforced concrete columns without cranes for single-storey industrial buildings. Specifications
- GOST 19804.7-1983 Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
- GOST 24268-1980 Guide pins of portable press moulds for manufacturing of industrial rubber articles. Design and dimensions
- GOST 24269-1980 Guide pins of bar press moulds for manufacturing of industrial rubber articles. Design and dimensions
- GOST 25628.3-2016 Reinforced concrete columns with cranes for single-storey industrial buildings. Specifications
- GOST 30062-1993 Bar reinforcement for reinforced concrete structures. Eddy current method of strength properties control
- GOST 24476-1980 Precast reinforced concrete foundations for columns of the framework of different kinds of application for skeletal multistory buildings. Specifications
- GOST 24518-1980 Columns quiding quick-changing of press-moulds for manufacturing of rubber-technical articles. Construction and dimensions
- GOST 22687.2-1985 Centrifugal cylinder reinforced concrete posts for high-voltage transmission lines. Structure and dimensions
- GOST R ISO 11003-1-2017 Adhesives. Determination of shear behaviour of structural adhesives. Part 1. Torsion test method of butt-bonded hollow cylinders
- GOST 23444-1979 Centrifugated reinforced concrete posts of annular section for industrial buildings and structures. Specifications
TH-TISI, Gel column + column
- TIS 2479-2009 Marine rubber fenders: cylindrical shape and v-shape
工业和信息化部/国防科技工业局, Gel column + column
Professional Standard - Traffic, Gel column + column
- JT/T 871-2013 High-strength steel-plastic sonic-testing pipes for concrete bored piles
Professional Standard - Recommended Standards for Engineering Construction, Gel column + column
- CECS 188-2005 Technical specification for steel tube-reinforced concrete column structure
- CECS 347-2013 Technical specification for frame structure of confined RC columns and composite beams
National Electrical Manufacturers Association（NEMA), Gel column + column
The American Road & Transportation Builders Association, Gel column + column
- AASHTO T 231-2005 Standard Method of Test for Capping Cylindrical Concrete Specimens
- AASHTO TP 142-2021 Standard Specification for Accelerated Determination of Potentially Deleterious Expansion of Concrete Cylinder Due to Alkali-Silica Reaction (Accelerated Concrete Cylinder Test, ACCT)
- AASHTO T 231-2005(R2009) Standard Practice for Capping Cylindrical Concrete Specimens
- AASHTO T 231-2013 Standard Practice for Capping Cylindrical Concrete Specimens
- AASHTO T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
- AASHTO T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO M 205M_M 205-2007 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- AASHTO T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T 198-2002 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
- AASHTO T 198-2015 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
- AASHTO PP 58-2012 Standard Practice for Static Segregation of Hardened Self-Consolidating Concrete (SCC) Cylinders
- AASHTO T231-1997 Standard Method of Test for Capping Cylindrical Concrete Specimens Twentieth Edition; ASTM C 617-94
- AASHTO T22-1997 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens Twentieth Edition; ASTM C39-86
- AASHTO TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
- AASHTO TP 119-2021 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
- AASHTO M 205-1997 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically HM-22; Part IA; ASTM Designation C 470-94 R(2001)
Standard Association of Australia （SAA）, Gel column + column
ES-AENOR, Gel column + column
Anhui Provincial Standard of the People's Republic of China, Gel column + column
- DB34/T 3351-2019 Guidelines for Temperature Control of Mass Concrete in Bridge Pylons
Canadian Standards Association (CSA), Gel column + column
- CSA A14-00-2000 Poteaux en bton Septieme Edition; Fiche No 1; Misa a jour No 2
国家铁路局, Gel column + column
- TB/T 2286-2020 Prestressed concrete pillars for electrified railway catenary
GOSTR, Gel column + column
- GOST 9634-1981 Capsulebubble steel caps of column apparatus. Construction and dimensions
- GOST R 57918-2017 Plastics. Polymer dispersions and rubber latices. Determination of residual monomers and other organic components by capillary-column gas chromatography. Part 1. Direct injection method
Professional Standard - Machinery, Gel column + column
- JB/T 6144.2-1992 Cone seal rubber hose assembly Cylindrical pipe thread cone joint
AASHTO - American Association of State Highway and Transportation Officials, Gel column + column
- T 231-2005 Standard Method of Test for Capping Cylindrical Concrete Specimens
- T 231-2013 Standard Practice for Capping Cylindrical Concrete Specimens
- T 231-2017 Standard Method of Test for Capping Cylindrical Concrete Specimens
- T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- PP 89-2018 Standard Practice for Grinding the Ends of Cylindrical Concrete Specimens
- T 198-2009 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
- T 198-2002 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
- T 198-2015 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
- TP20-1993 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens (Edition 1A)
- T 231-1990 Standard Specification for Capping Cylindrical Concrete Specimens (Eightenth Edition; ASTM C 617-87)
- T 231-1997 Standard Specification for Capping Cylindrical Concrete Specimens (Ninetenth Edition; ASTM C 617-94)
- R 81-2017 Standard Practice for Static Segregation of Hardened Self-Consolidating Concrete (SCC) Cylinders
- PP 58-2008 Standard Method of Practice for Static Segregation of Hardened Self-Consolidating Concrete (SCC) Cylinders
- PP 58-2012 Standard Practice for Static Segregation of Hardened Self-Consolidating Concrete (SCC) Cylinders
- T22-1992 Standard Specification for Compressive Strength of Cylindrical Concrete Specimens (Eighteenth Edition; ASTM C39-86)
- T 231-2003 Standard Method of Test for Capping Cylindrical Concrete Specimens (ASTM Designation C 617-98)
- T 22-2006 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (ASTM Designation: C 39-04a)
- T 22-2003 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (ASTM Designation: C 39-99)
- T 22-2005 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (ASTM Designation: C 39-04a)
- T22-1997 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (Twentieth Edition; ASTM C39-86)
- T198-1993 Standard Specification for Splitting Tensile Strength of Cylindrical Concrete Specimens (Eighteenth Edition; ASTM C496-90)
- TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
- T198-1997 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens (Twentieth Edition; ASTM C496-90)
- TP18-1994 Standard Test Method for Determining the Fundamental Transverse Frequency and Quality Factor of Concrete Prism Specimens
ES-UNE, Gel column + column
- UNE 146509:2018 Determination of the potential reactivity of aggregates. Concrete prisms method.
- UNE 83967:2016 EX Concrete durability. Test method for the assessment of potential expansion due to alkali-aggregate reactivity of concrete mixes. Method semi-accelerated of concrete prisms.
国家药品监督管理局, Gel column + column
- YY/T 1592-2018 ABO positive typing and RhD blood typing test card (column agglutination method)
BELST, Gel column + column
- STB 1178-99 Reinforced concrete columns for buildings and structures. General specifications
- STB 1247-2000 Concrete posts for power transmission line supports of voltage 0,38 kV and from 6 to 10 kV. Specifications
Japanese Industrial Standards Committee (JISC), Gel column + column
- JIS A 1114:2002 Method of sampling and testing for strength of sawed prism of concrete
- JIS A 1114 AMD 1:2022 Method of sampling and testing for strength of sawed prism of concrete (Amendment 1)
- JIS A 1114:2011 Method of sampling and testing for strength of sawed prism of concrete
Construction department of Hebei province, Gel column + column
- DB13(J) 36-2002 Technical specification for reinforced concrete special-shaped column frame light structure residential buildings
Indonesia Standards, Gel column + column
- SNI 1974-2011 Cara uji kuat tekan beton dengan benda uji silinder
- SNI 2491-2014 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
SG-SPRING SG, Gel column + column
- SS 78 Pt.A10-1987 Testing Concrete Part A10 : Method For Making Test Cylinders From Fresh Concrete
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gel column + column
- GB 6413-1986 Calculation of scuffing load capacity for involute cylindrical gears
- GB/T 6413-1986 Calculation of scuffing load capacity for involute cylindrical gears
- GB/Z 6413.1-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears--Part 1:Flash temperature method
BE-NBN, Gel column + column
RO-ASRO, Gel column + column
- STAS 3446/2-1976 Land surveys PREFABRICATED CONCRET]-: POSTS FOR TI Iii MATERIAL IZA- TION OF TOPOGRAPHICAL NETWORKS
- STAS 11049-1978 VULCANIZED RUBBER D. trmination of hystreesis by hysteresimeter with plunger
American Concrete Institute, Gel column + column
- ACI 352.1R-1989 Recommendations for Design of Slab-Column Connections in Monolithic Reinforced Concrete Structures
- ACI 352R-2002 Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures
- ACI MNL-17-2021 The Reinforced Concrete Design Handbook (COLUMN INTERACTION DIAGRAM SPREADSHEET; Includes Access to Additional Content)
Shandong Provincial Standard of the People's Republic of China, Gel column + column
- DB37/T 5203-2021 Technical specification for prefabricated square steel tube concrete composite special-shaped column structure
Professional Standard - Chemical Industry, Gel column + column
- HG/T 4300-2012 Rubber.Measurement of rheological properties.Piston type capillary rheometer methods
Heilongjiang Provincial Standard of the People's Republic of China, Gel column + column
- DB23/T 1391-2010 Technical specification for EPS module reinforced concrete core column structure building energy saving system
VN-TCVN, Gel column + column
- TCVN 5726-1993 Heavy weight concrete.Method for determination of prismatic compressive strength and static modulus of elasticity
International Organization for Standardization (ISO), Gel column + column
- ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
- ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-type durometer method
- ISO 7267-3:2007 Rubber-covered rollers - Determination of apparent hardness - Part 3: Pusey and Jones method
- ISO 10500:1991 Industrial tyres and rims; cylindrical and conical base rubber solid tyres (metric series); designation, dimensions and marking
IT-UNI, Gel column + column
- UNI 11604-2020 Alkali-aggregate reaction in concrete - Detection of potential alkali-reactivity of aggregates for concrete - Concrete prisms accelerated expansion test
KR-KS, Gel column + column
- KS F 1611-3-2013(2023) Fire resistance performance for elements of building construction ― Part 3: Beams and columns made of structural glued laminated timber
IX-SA, Gel column + column
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gel column + column
- GB/T 35480-2017 Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
PT-IPQ, Gel column + column
- NP ISO 7267-3:2001 Rubber-covered rollers Determination of apparent hardness Part 3:Pusey and Jones method
国家能源局, Gel column + column
- SH/T 1815-2017 Determination of residual monomers and other organic components in synthetic rubber latex by capillary column head gas chromatography
- SH/T 1819-2018 Determination of residual styrene content in carboxylated styrene-butadiene latex by capillary column gas chromatography
PH-BPS, Gel column + column
- PNS ASTM C1231/C1231M:2021 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
Malaysia Standards, Gel column + column
- MS 1157 Pt.40/1-1999 METHODS OF TEST FOR VULCANISED RUBBER: PART 40/1 : DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE
Professional Standard - Petrochemical Industry, Gel column + column
- SH/T 1760-2007 Detennination of residual monomers and other organic components in synthetic rubber lataces by capillary- column gas chromatography-direct liquid injection method