ZH
RU
ES

The role of burn-in

The role of burn-in, Total:497 items.

In the international standard classification, The role of burn-in involves: Equipment for processing of minerals, Fibre optic communications, Burners. Boilers, Reinforced plastics, Protective equipment, Thermodynamics and temperature measurements, Radiocommunications, Protection against fire, Refractories, Geology. Meteorology. Hydrology, Materials for aerospace construction, Products of the chemical industry, Environmental protection, Air quality, Construction materials, Internal combustion engines for road vehicles, Water quality, Dentistry, Products of the textile industry, Non-textile floor coverings, Aircraft and space vehicles in general, Wastes, Construction technology, Electrical wires and cables, Printed circuits and boards, Interface and interconnection equipment, Corrosion of metals, Industrial furnaces, Domestic, commercial and industrial heating appliances, Equipment for petroleum and natural gas industries, Road vehicle systems, Food products in general, Semiconductor devices, Electrical and electronic testing, Plastics, Rubber and plastics products, Fasteners, Metalliferous minerals, Non-metalliferous minerals, Shipbuilding and marine structures in general, Ferrous metals, Testing of metals, Company organization and management, Acoustics and acoustic measurements, Noise with respect to human beings, Cableway equipment, Medical equipment, Kitchen equipment, Powder metallurgy, Coals, Ergonomics, Analytical chemistry, Semi-manufactures of timber, Rubber, Sacks. Bags, Aids for disabled or handicapped persons, Welding, brazing and soldering, Electrical engineering in general, Radiation protection, General methods of tests and analysis for food products, Fruits. Vegetables, Farming and forestry, Heat recovery. Thermal insulation, Elements of buildings, Pulps, Standardization. General rules, Cellular materials, Chipless working equipment, Installations in buildings, Construction industry, Extraction and processing of petroleum and natural gas, Industrial automation systems, Lamps and related equipment, Surface treatment and coating, Tea. Coffee. Cocoa, Iron and steel products, Structures of buildings, Fuels, Resistors, Nuclear energy engineering, Safety of machinery, Paints and varnishes, Products of non-ferrous metals, Open systems interconnection (OSI).

BE-NBN, The role of burn-in

NBN 539-1963
NBN-EN 273-1993 Wood preservatives. Determination of the curative action against Lyctus Brunneus (Stephens) (laboratory method)
NBN-EN 298-1994 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
NBN-EN 24935-1992
NBN-EN 49-1-1992

International Code Council, The role of burn-in

ICC IOTFDC-1998 APPENDIX A-1998 Manufactured Housing Used as Dwellings

Professional Standard - Machinery, The role of burn-in

JB/T 11003-2010 Vertical preheater for calcining lime

工业和信息化部, The role of burn-in

JC/T 2612-2021 Quartz furnace tube for fiber optic preform sintering
YS/T 1399-2020 Technical specification for desulfurization of calcined petroleum coke flue gas for prebaked anode production
YB/T 164-2022 Al2O3-SiC-C refractory lining for molten iron pretreatment work
YB/T 4909.3-2021 Methods for analysis of calcium-based desulfurizers used for pretreatment of molten iron and steelmaking Part 3: Determination of sulfur content Combustion iodometric method

Group Standards of the People's Republic of China, The role of burn-in

T/CEMIA 003-2017 Quartz Tube for Sintering of Optical Fiber Preform
T/CEEIA 538-2021 Full premixed gaseous fuel burners for（industrial）boiler
T/CHSA 009-2020 The operating standard of microscopic tooth preparation
T/WSJD 14.1-2020 Ergonomic precautionary principles for work-related musculoskeletal disorders Part I: General requirements
T/ZAII 040-2022 General specification for automatic safety warning and management system for outdoor operation in substation
T/SDAS 511-2022 Practices for preventing and reducing aflatoxin contamination in peanuts
T/WSJD 14.2-2022 Ergonomic preventive principles for work-related musculoskeletal disorders Part II Automobile manufacturing operations
T/CTBA 006-2021 Sample Bidding Document & Sample Prequalification Document for Selection of Investors for Public-Private Partnership (PPP) Projects (Waste Incineration Disposal Projects)
T/ITS 0038-2015 Data Specification of Blind Spot Warning Systems in Cooperative ITS

AT-ON, The role of burn-in

ONORM M 7457-1991 Gas appliances with mechanicallyassisted pre-mix surface burners
ONORM EN 118-1991 Wood preservatives — Determination of preventive action against Reticulitermes santonensis de Feytaud (Laboratory method)
ONORM EN 273-1993 Wood preservatives - Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method)
ONORM EN 46-1993 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) (Laboratory method)

Association Francaise de Normalisation, The role of burn-in

NF T57-557:1973 Pre-impregnated glass fabrics. Determination of loss through calcination.
NF T57-556:1973 Pre-impregnated glass fabrics. Determination of the thickness of a layer of pre-impregnated product after pressing and curing.
NF X41-539:1990 Wood preservatives. Determination of preventive action against reticulitermes santonensis de feytaud (laboratory method).
NF EN 46-2:2016 Produits de préservation du bois - Détermination de l'action préventive contre les larves récemment écloses d'Hylotrupes bajulus (Linnaeus) - Partie 2 : effet ovicide (Méthode de laboratoire)
NF X41-528-2*NF EN 46-2:2016 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2 : ovicidal effect (laboratory method)
NF S31-600-3*NF EN ISO 11690-3:1999 Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 3 : sound propagation and noise prediction in workrooms.
NF EN 12171:2003 Systèmes de chauffage dans les bâtiments - Instructions de conduite, maintenance et utilisation - Systèmes de chauffage ne requérant pas pour leur conduite l'intervention d'un professionnel
NF C20-924-5-1*NF EN 60695-5-1:2003 Fire hazard testing - Part 5-1 : corrosion damage effects of fire effluent - General guidance
NF P82-910:2004 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks.
NF EN 118:2014 Produits de préservation des bois - Détermination de l'action préventive contre les espèces de Reticulitermes (termites européens) (méthode de laboratoire)
NF EN 13747+A2:2010 Produits préfabriqués en béton - Prédalles pour systèmes de planchers
NF EN 13747/IN2:2010 Produits préfabriqués en béton - Prédalles pour systèmes de planchers
NF ISO 11346:2014 Caoutchouc vulcanisé ou thermoplastique - Estimation de la durée de vie et de la température maximale d'utilisation
NF EN ISO 13628-9:2009 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 9 : systèmes d'intervention utilisant des dispositifs à commande à distance (ROT)
NF EN 2825:2012 Série aérospatiale - Comportement au feu des matériaux non métalliques sous l'action de chaleur rayonnante et de flammes - Détermination de la densité de fumée
NF EN 14399-2:2015 Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 2 : aptitude à l'emploi pour la mise en précontrainte
NF ISO 15178:2001 Qualité du sol - Dosage du soufre total par combustion sèche
NF E61-120:1993 Production systems including manipulating industrial robots. Prevention of accidents of mechanical origin.
NF A06-386-2*NF EN ISO 15349-2:2021 Unalloyed steel - Determination of low carbon content - Part 2 : infrared absorption method after combustion in an induction furnace (with preheating)
NF EN 2826:2012 Série aérospatiale - Comportement au feu des matériaux non métalliques sous l'action de chaleur rayonnante et de flammes - Détermination des composants de gaz de fumée
NF D37-101-1/IN1*NF EN 1860-1/IN1:2017 Appliances, solid fuels and firelighters for barbecueing - Part 1 : barbecues burning solid fuels - Requirements and test methods
NF D37-101-1*NF EN 1860-1+A1:2017 Appliances, solid fuels and firelighters for barbecueing - Part 1 : barbecues burning solid fuels - Requirements and test methods
NF A06-386-2:2003 Unalloyed steel - Determination of low carbon content - Part 2 : infrared absorption method after combustion in an induction furnace (with preheating).
NF P82-910*NF EN 1709:2019 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection and instructions for maintenance and operational inspection
NF EN 46-1:2016 Produits de préservation du bois - Détermination de l'action préventive contre les larves récemment écloses d'Hylotrupes bajulus (Linnaeus) - Partie 1 : application par traitement de surface (Méthode de laboratoire)
NF EN ISO 15614-6:2006 Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 6 : soudage à l'arc et aux gaz du cuivre et de ses alliages
NF EN 1741:1998 Détermination de la résistance au cisaillement des jonctions entre les éléments préfabriqués réalisés en béton cellulaire autoclavé ou en béton de granulats légers à structure ouverte, sous l'effet de forces agissant en dehors du plan des...

IN-BIS, The role of burn-in

American Society for Testing and Materials (ASTM), The role of burn-in

ASTM F2703-08(2013) Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction
ASTM E144-94(2001) Standard Practice for Safe Use Of Oxygen Combustion Bombs
ASTM E144-94(1995) Standard Practice for Safe Use Of Oxygen Combustion Bombs
ASTM E144-94(2011) Standard Practice for Safe Use of Oxygen Combustion Bombs
ASTM E144-94(2006)e1 Standard Practice for Safe Use of Oxygen Combustion Bombs
ASTM C492-92(2003) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM C492-92(2008) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM C492-92(2013) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM D5485-10 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM C869-91(1999) Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
ASTM F2703-21 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction
ASTM C544-03 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
ASTM C544-03(2008) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
ASTM F1788-14 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM C544-03(2013) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM B971-10 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
ASTM B972-10(2014) Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
ASTM B973-10(2014) Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
ASTM D8342/D8342M-21 Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp Pre-roll
ASTM G168-00 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM G168-17 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM C907-03 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-03(2008) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM E1602-01 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM E1602-94 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM D2643/D2643M-21 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
ASTM D2643/D2643M-08(2019) Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
ASTM B973-10 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
ASTM B972-10 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
ASTM D5207-98 Standard Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials
ASTM F2702-15 Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction
ASTM F2703-08 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction
ASTM F2702-08 Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction
ASTM E400-97 Standard Test Method for Analysis of Ores, Minerals, and Rocks by the Fire Assay Preconcentration Optical Emission Spectroscopy
ASTM C618-00 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete
ASTM C618-02 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete
ASTM C618-01 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete
ASTM C857-12a Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
ASTM F1788-19 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM C1146-96(2003) Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C1146-09(2013) Standard Guide for Prefabricated Panel and Hndash;bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C1146-09 Standard Guide for Prefabricated Panel and Hx2013;bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM E2243-13 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation
ASTM E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM D2643-08 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
ASTM D2643/D2643M-08(2013)e1 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
ASTM D5025-11 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D5025-12 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM E2579-11 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
ASTM D6586-03 Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
ASTM F1788-97 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM F1788-97(2003) Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM F1788-22 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM D3566-03(2018) Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM F1322-90(1998) Standard Guide for Selection of Shipboard Incinerators
ASTM F1322-90(2009) Standard Guide for Selection of Shipboard Incinerators
ASTM E2690-10e1 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM D5025-12e1 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM C390-08(2013) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM D5025-05 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D5025-20 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM C667-09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C667-09(2014) Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C1146-96 Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM D5025-99 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
ASTM D6529-11 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50x2013;1000 x03BC;S/cm
ASTM E1388-12 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM C618-78 Standard Specification for Fly Ash And Raw Or Calcined Natural Pozzolan For Use As A Mineral Admixture In Portland Cement Concrete
ASTM C618-08 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
ASTM C618-22 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
ASTM C618-19 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
ASTM D3322-82(2011) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM B882-10(2018) Standard Specification for Pre-Patinated Copper for Architectural Applications
ASTM F1322-15 Standard Guide for Selection of Shipboard Incinerators

RO-ASRO, The role of burn-in

STAS 6392-1981 PRECAST MARKS FOR CADASTRAL MARKING OF WATER SOURCES
STAS 6394-1973 PRECAST MARKS FOR CADASTRAL MARKING OF WATER SOURCES
STAS 7093-1976 Protection against the biodamaging TEST TO THE ACTION OF SOIL MICRO-ORGANISMS
STAS 12941-1991 Electrol ysis pans with preroasted anodes for electrol ytic aluminium manufacture Calculus method for electrical energy specific consumption
STAS 13101-1992 Precast reinforced concrete panels for the floor of the underground mining works
STAS 10101/20-1978 Actions upon structures ACTION OF THE WIND
STAS 8116/1-1988 PREFABRICATED SLEEPERS OF PRE-STRESSED CONCRETE SLEEPERS FOR NORMAL RAILWAYS
STAS 10579-1976 JOINTS FOR THE FAQADES OF THE BUILDINGS MADE FROM BIG PREFABRICATED SLABS Terminology and classification
STAS 8116/2-1988 Prefabricated sleepers of pre-stressed concrete SLEEPERS FOR NORMAL GAUGE INDUSTRIAL RAILWAYS
STAS 10101/0-1975 ACTIONS ON STRUCTURES Classification and combination of actions

HU-MSZT, The role of burn-in

International Telecommunication Union (ITU), The role of burn-in

ITU-T Q.2964.1-1996 Digital Subscriber Signalling System No. 2: Basic Look-Ahead - Series Q: Switching and Signalling Broadband ISDN - B-ISDN Application Protocols for Access Signalling Study Group 11; 24 pp
ITU-T Y.1707-2010 (Pre-Published) Architecture of Control Plane Operations
ITU-T Q.2724.1-1996 B-ISDN User Part - Look-Ahead Without State Change for the Network Node Interface (NNI) - Series Q: Switching and Signalling - Broadband ISDN - B-ISDN Application Protocols for the Network Signalling Study Group 11; 34 pp
ITU-R F.1611-2003 Prediction methods for adaptive HF system planning and operation
ITU-R INFORME 888-2 SPANISH-1990 SHORT-TERM FORECASTING OF CRITICAL FREQUENCIES, OPERATIONAL MAXIMUM USABLE FREQUENCIES AND TOTAL ELECTRON CONTENT PREDICCIONES A CORTO PLAZO DE LAS FRECUENCIAS CR蚑ICAS, DE LAS FRECUENCIAS M罼IMAS UTILIZABLES DE EXPLOTACI覰 Y DEL CONTENIDO ELECTR覰ICO TO
ITU-R REPORT 888-2-1990 SHORT-TERM FORECASTING OF CRITICAL FREQUENCIES, OPERATIONAL MAXIMUM USABLE FREQUENCIES AND TOTAL ELECTRON CONTENT
ITU-R F.1611 SPANISH-2003 Prediction methods for adaptive HF system planning and operation
ITU-R F.1611 FRENCH-2003 Prediction methods for adaptive HF system planning and operation
ITU-T X.1195-2011 (Pre-Published) Service and content protection (SCP) interoperability scheme
ITU-R P.1240-2015 ITU-R methods of basic MUF, operational MUF and ray-path prediction
ITU-R P.1546-3-2007 Method for point-to-area predictions for terrestrial services in the frequency range 30 MHz to 3 000 MHz
ITU-R RAPPORT 727-3 FRENCH-1990 SHORT-TERM PREDICTION OF SOLAR-INDUCED VARIATIONS OF OPERATIONAL PARAMETERS FOR IONOSPHERIC PROPAGATION PR蒝ISION A COURT TERME DES VARIATIONS D'ORIGINE SOLAIRE DES CARACT蒖ISTIQUES D'EXPLOITATION POUR LA PROPAGATION IONOSPH蒖IQUE
ITU-R REPORT 727-3-1990 SHORT-TERM PREDICTION OF SOLAR-INDUCED VARIATIONS OF OPERATIONAL PARAMETERS FOR IONOSPHERIC PROPAGATION
ITU-R RAPPORT 888-2 FRENCH-1990 SHORT-TERM FORECASTING OF CRITICAL FREQUENCIES, OPERATIONAL MAXIMUM USABLE FREQUENCIES AND TOTAL ELECTRON CONTENT PR蒝ISION A COURT TERME DES FR蒕UENCES CRITIQUES, DES FR蒕UENCES MAXIMALES UTILISABLES D'EXPLOITATION ET DU CONTENU 蒐ECTRONIQUE TOTAL
ITU-T Q.3948-2011 (Pre-Published) Service testing framework for VoIP at NGN UNI
ITU-R QUESTION 213-2/3-2009 The short-term forecasting of operational parameters for trans-ionospheric radiocommunication and aeronautical radionavigation services

Korean Agency for Technology and Standards (KATS), The role of burn-in

KS F ISO TR 9122-5:2004 Toxicity testing of fire effluents - Part 5 Prediction of toxic effects of fire effluents
KS F ISO TR 9122-5:2015 Toxicity testing of fire effluents - Part 5 Prediction of toxic effects of fire effluents
KS K ISO 13506-2010(2015) Protective clothing against heat and flame－Test method for complete garments－Prediction of burn injury using an instrumented manikin
KS K ISO 13506:2010 Protective clothing against heat and flame－Test method for complete garments－Prediction of burn injury using an instrumented manikin
KS B 8216-2009 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
KS F ISO TR 9122-5-2004(2014) Toxicity testing of fire effluents - Part 5 Prediction of toxic effects of fire effluents
KS F ISO TR 9122-4:2015 Toxicity testing of fire effluents－Part 4：The fire model (furanaces and combustion apparatus used in small-scale testing)
KS F ISO TR 9122-4:2004 Toxicity testing of fire effluents-Part 4:The fire model (furanaces and combustion apparatus used in small-scale testing)
KS D ISO 15349-3:2005 Unalloyed steel－Determination of low carbon content－Part 3：Infrared absorption method after combustion in an electric resistance furnace(with preheating)
KS T ISO 6599-1:2008 Packaging－Sacks－Conditioning for testing－Part 1：Paper sacks
KS P 0236-2018 Air cushions for pressure sore preventing cushions
KS F ISO 9883-2001(2016) Performance standards in building－Performance test for precast concrete floors－Behaviour under concentrated load
KS D ISO 15349-3-2005(2015) Unalloyed steel－Determination of low carbon content－Part 3：Infrared absorption method after combustion in an electric resistance furnace(with preheating)
KS D ISO 15349-2-2003(2018) Unalloyed steel－Determination of low carbon content－Part 2：Infrared absorption method after combustion in an induction furnace (with preheating)
KS M ISO 12986-1:2004 Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 1:Determination of bending/shear strength by a three-point method
KS M ISO 12986-1:2013 Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method
KS B 8903-2012 Pellet combustion device for small heating boilers
KS B 6110-2014(2019) General rules for safety of industrial combustion furnaces
KS C IEC 61249-4-17-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-17：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Non-halogenated epoxide
KS C IEC 61249-4-14-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-14：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Epoxide woven E-glass p
KS C IEC 61249-4-15-2011(2016) Materials for printed boards and other interconnecting structures－Part 4-15：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Multifunctional epoxide
KS C IEC 61249-4-14-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-14：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Epoxide woven E-glass p
KS C IEC 61249-4-17-2011(2021) Materials for printed boards and other interconnecting structures－Part 4-17：Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards)－Non-halogenated epoxide
KS M ISO 8005:2003 Carbonaceous material used in the production of aluminium-Green and calcined coke-Determination of ash content
KS M ISO 8005:2013 Carbonaceous material used in the production of aluminium－Green and calcined coke－Determination of ash content
KS M ISO 10236:2004 Carbonaceous materials for the production of aluminium－Green coke and calcined coke for electrodes－Determination of bulk density(tapped)
KS M ISO 10840:2013 Plastics — Guidance for the use of standard fire tests
KS M ISO 10840:2004 Plastics-Guidance for the use of standard fire tests
KS G 5120-1995 General constructions of gas burning appliances for domestic use

International Organization for Standardization (ISO), The role of burn-in

ISO/TR 9122-5:1993 Toxicity testing of fire effluents; part 5: prediction of toxic effects of fire effluents
ISO 13506:2008 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
ISO/DIS 13506-2 Protective clothing against heat and flame — Part 2: Skin burn injury prediction — Calculation requirements and test cases
ISO 13506-2:2017 Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases
ISO/TR 10840:1993 Plastics; burning behaviour; guidance for development and use of fire tests
ISO/TR 11696-1:1999 Uses of reaction to fire test results - Part 1: Application of test results to predict fire performance of internal linings and other building products
ISO/TR 11690-3:1997 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms
ISO/TR 15349-3:1998 Unalloyed steel - Determination of low carbon content - Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)
ISO 5755-3:1987 Sintered metal materials; Specifications; Part 3 : Sintered alloyed and sintered stainless steels used for structural parts
ISO/TR 10840:1993/Cor 1:1995 Plastics - Burning behaviour - Guidance for development and use of fire tests; Technical Corrigendum 1
ISO/TR 9122-4:1993 Toxicity testing of fire effluents; part 4: the fire model (furnaces and combustion apparatus used in small-scale testing)
ISO/TR 10295-3:2012 Fire tests for building elements and components - Fire testing of service installations - Part 3: Single component penetration seals - Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
ISO 10840:2003 Plastics - Guidance for the use of standard fire tests
ISO 10840:2008 Plastics - Guidance for the use of standard fire tests

ESDU - Engineering Sciences Data Unit, The role of burn-in

ESDU 05001-2011 Prediction of combustor noise from gas turbine engines
ESDU 05001-2005 Prediction of combustor noise from gas turbine engines.
ESDU 05001 A-2016 Prediction of combustor noise from gas turbine engines

US-FCR, The role of burn-in

FCR NAV MO-911-1990 UTILIZATION OF NAVY-GENERATED WASTE OILS AS BURNER FUEL
FCR 40 CFR PART 241-2011 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR 40 CFR PART 241-2014 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR 40 CFR PART 241-2015 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR UFGS-21 13 18.00 10-2009 PREACTION AND DELUGE SPRINKLER SYSTEMS, FIRE PROTECTION
FCR COE CEGS 13945-A-1998 PREACTION AND DELUGE SPRINKLER SYSTEMS, FIRE PROTECTION
FCR FED FCGS 15503-1981 FIRE EXTINGUISHING SPRINKLER SYSTEMS (DELUGE) (PRE-ACTION)
FCR AF ETL 90-2-1990 GENERAL POLICY FOR PREWIRED WORKSTATIONS AND SYSTEMS FURNITURE
FCR COE CEGS 13945-2000 PREACTION AND DELUGE SPRINKLER SYSTEMS, FIRE PROTECTION, SPECIAL CHANGE (2000) INCORPORATED
FCR COE REMR-CS-28 FINAL REPORT-1989 CONCEPTS FOR INSTALLATION OF THE PRECAST CONCRETE STAY-IN-PLACE FORMING SYSTEM FOR LOCK WALL REHABILITATION IN AN OPERATIONAL LOCK

Professional Standard - Petroleum, The role of burn-in

SY/T 6514-2001 Preparing tank bottoms for hot work

British Standards Institution (BSI), The role of burn-in

BS 7273-3:2000 Code of practice for the operation of fire protection measures - Electrical actuation of pre-action sprinkler systems
BS EN 46-1:2005 Wood preservatives - Determination of the preventive action against Hylotrupes bajalus (Linnaeus) - Larvicidial effect (laboratory method)
BS EN 46-2:2006 Wood preservatives - Determination of the preventive action against Hylotrupes bajalus (Linnaeus) - Ovicidal effect (laboratory method)
BS ISO 13506-2:2017 Protective clothing against heat and flame. Skin burn injury prediction. Calculation requirements and test cases
BS EN 46-1:2009 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Application by surface treatment (laboratory method)
BS EN 46-1:2016 Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus). Application by surface treatment (laboratory method)
BS ISO 9239-1:1998 Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Flame spread using a radiant heat ignition source
BS ISO TR 9122-4:1996 Toxicity testing of fire effluents - The fire model (furnaces and combustion apparatus used in small-scale testing)
BS 8000-2.2:1990 Workmanship on building sites - Code of practice for concrete work - Sitework with in situ and precast concrete
BS EN 61249-4-17:2009 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burn
BS DD ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Guidance on the use of heat flux meters in fire tests
BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters. Guidance on the use of heat flux meters in fire tests
BS 7842:1996 Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
BS EN 298:2022 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
BS EN ISO 15349-2:2003 Unalloyed steel - Determination of low carbon content - Infrared absorption method after combustion in an induction furnace (with preheating)
BS 7273-5:2008 Code of practice for the operation of fire protection measures Part 5: Electrical actuation of watermist systems (except pre-action systems)
BS ISO 13506:2008 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
BS PD ISO/TR 21954:2018 Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator
BS EN 61249-4-18:2014 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials unclad (for the manufacture of multilayer boards). High performance epoxide woven E-glass prepreg of defined flammability (vertical burnin
BS EN 61249-4-18:2013 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials unclad (for the manufacture of multilayer boards). High performance epoxide woven E-glass prepreg of defined flammability (vertical burnin
BS 7273-3:2008 Code of practice for the operation of fire protection measures - Part 3: Electrical actuation of pre-action watermist and sprinkler systems
BS EN 203-2-9:2005 Gas heated catering equipment - Specific requirements - Solid tops, warming plates and griddles
20/30421819 DC BS EN 298. Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
BS EN 118:2005 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (laboratory method)
PD ISO/TR 21954:2018 Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator
BS EN 1860-1:2013+A1:2017 Appliances, solid fuels and firelighters for barbecueing - Barbecues burning solid fuels. Requirements and test methods
BS 476-23:1987 Fire tests on building materials and structures - Methods for determination of the contribution of components to the fire resistance of a structure
BS EN 61249-4-19:2014 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials unclad (for the manufacture of multilayer boards). High performance non-halogenated epoxide woven E-glass prepreg of defined flammability
BS EN 61249-4-19:2013 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials unclad (for the manufacture of multilayer boards). High performance non-halogenated epoxide woven E-glass prepreg of defined flammability
BS ISO 18096:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
BS 8000 Sec.2.2:1990 Workmanship on building sites. Code of practice for concrete work. Sitework with in situ and precast concrete
BS EN 14399-2:2015 Tracked Changes. High-strength structural bolting assemblies for preloading. Suitability for preloading
BS EN 14707:2012 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
BS EN 14707:2005+A1:2007 Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature for preformed pipe insulation
BS EN 1991-1-6:2005 Eurocode 1. Actions on structures - General actions - Actions during execution
BS EN 14399-2:2005 High-strength structural bolting assemblies for preloading. Suitability test for preloading
BS EN ISO 15630-3:2002 Steel for the reinforcement and prestressing of concrete - Test methods - Prestressing steel
BS EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete. Test methods. Prestressing steel
23/30431377 DC BS EN ISO 13506-2. Protective clothing against heat and flame - Part 2. Skin burn injury prediction. Calculation requirements and test cases
21/30443213 DC BS EN 1860-3. Appliances, solid fuels and firelighters for barbecuing - Part 3. Firelighters for igniting solid fuels for use in barbecues and grill applications. Requirements and test methods
BS EN 118:2013 Wood preservatives. Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
BS EN ISO 15349-2:2021 Tracked Changes. Unalloyed steel. Determination of low carbon content. Infrared absorption method after combustion in an induction furnace (with preheating)
BS EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
BS EN 1991-1-4:2005 Eurocode 1: Actions on structures. Part 1-4: General actions .Wind actions
BS EN 1991-1-7:2006 Eurocode 1. Actions on structures - General actions - Accidental actions
BS EN 1991-1-4:2005+A1:2010 Eurocode 1. Actions on structures. General actions. Wind actions
BS EN 1991-1-5:2004 Eurocode 1. Actions on structures - General actions - Thermal actions

European Committee for Standardization (CEN), The role of burn-in

EN 1106:2001 Manually Operated Taps for Gas Burning Appliances
EN 118:1986 AMD 1 Wood Preservatives; Determination of Preventive Action Against Reticulitermes Santonensis de Feytaud; (Laboratory Method)
EN 118:2013 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
EN 118:1990 Wood preservatives; determination of preventive action against; reticulitermes santonensis de Feytaud (laboratory method)
EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
EN 20:1974 Wood Preservatives: Determination of the Preventive Action Against Lyctus Brunneus: (Stephens) (Laboratory Method)
prEN 497-1991 Boiling burners burning liquefied petroleum gases for outdoor use
EN 676:2003 Automatic forced draught burners for gaseous fuels
EN 46:1976 Wood Preservatives: Determination of the Preventive Action Against Recently Hatched Larvae of Hylotrupes Bajulus (Linnaeus) (Laboratory Method)
EN 46:1988 Wood preservatives; determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) (laboratory method)
EN ISO 15349-2:2021 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)
EN 113:1996 Wood preservatives Test method for determining the protective effectiveness against wood destroying basidiomycetes Determination of the toxic values (Incorporates Amendment A1: 2004)
EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
EN 1709:2004 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks
EN 16340:2014 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices
prEN 26 prA1-1993 Gas burning appliances for instantaneous production of hot water for domestic use with atmospheric burner and sealed combustion circuit equipped with a fan incorporated in the "combustion air" or "combustion products" circuit
EN 1860-3:2023 Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods
EN 203-2-1:2014 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
EN ISO 11690-3:1998 Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 3: Sound Propagation and Noise Prediction in Workrooms ISO/TR 11690-3:1997
EN ISO 15349-2:2003 Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) ISO 15349-2:1999
prEN ISO 13506-2 Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases (ISO/DIS 13506-2:2023)
EN 46-1:2009 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method)
EN 46-1:2016 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method)
EN 303-6:2000 Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW

U.S. Environmental Protection Agency (U.S. EPA), The role of burn-in

EPA 40 CFR PART 241-2011 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS

Professional Standard - Military and Civilian Products, The role of burn-in

WJ 2395-1997 Operating procedures for copper column pre-pressing machine

Sichuan Provincial Standard of the People's Republic of China, The role of burn-in

DB51/T 1706-2013 Agricultural Weather Forecast Production Technical Regulations

Inner Mongolia Provincial Standard of the People's Republic of China, The role of burn-in

DB15/T 2729-2022 for agricultureweather forecastingfor field cropsseeding

Society of Automotive Engineers (SAE), The role of burn-in

SAE AMS7910C-2010 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered
SAE J1350-2011 Selection and Application Guidelines for Diesel, Gasoline, and propane Fired Liquid Cooled Engine Pre-Heaters
SAE J1350-1981 Selection and Application Guidelines for Diesel, Gasoline, and Propane Fired Liquid Cooled Engine Pre-Heaters, Information Report;
SAE J2400-2003 Human Factors in Forward Collision Warning Systems: Operating Characteristics and User Interface Requirements
SAE J2188-2012 Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, The role of burn-in

GJB 6429-2008 Specification for preaction system of submarine

U.S. Military Regulations and Norms, The role of burn-in

ARMY UFGS-21 13 18.00 10-2008 PREACTION AND DELUGE SPRINKLER SYSTEMS, FIRE PROTECTION
ARMY MIL-HDBK-406 VALID NOTICE 2-2013 Contamination Control Technology Cleaning Materials for Precision Precleaning and Use in Clean Rooms and Clean Work Stations

未注明发布机构, The role of burn-in

GJB 8656-2015 Specification for pre-action sprinkler systems for submarines
DIN EN 298 Berichtigung 1:2006 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
DIN EN 46-2:2006 Wood preservatives! Determination of the preventive effect against Hylotrupes bajulus (Linnaeus)! Part 2: Ovicidal effect (laboratory method)
AS/NZS 2728:2013

Electronic Components, Assemblies and Materials Association, The role of burn-in

ECA EIA-540HA00-2000 Blank Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment

CEN - European Committee for Standardization, The role of burn-in

EN 118:2005 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
EN 676:1996 Automatic Forced Draught Burners for Gaseous Fuels
EN 46-1:2005 Wood preservatives - Determination of the preventive action against Hylotrupes bajulus (Linnaeus) - Part 1: Larvicidial effect (Laboratory method)
PREN 1709-2017 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection and instructions for maintenance and operational inspection

German Institute for Standardization, The role of burn-in

DIN 61506:1987 Single-piece working suits for men; combinations and boiler suits with hood
DIN EN 46-2:2016-11 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method); German version EN 46-2:2016
DIN 67501:1999 Experimental evaluation of the protection from erythema of external sunscreen products for the human skin
DIN EN 298:2012-11 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels; German version EN 298:2012 / Note: DIN EN 298 (2012-09) remains valid alongside this standard until 2015-05-31.*To be replaced by DIN EN 298 (2020-09).
DIN EN 298:2020-09 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels; German and English version prEN 298:2020 / Note: Date of issue 2020-08-14*Intended as replacement for DIN EN 298 (2012-11).
DIN EN ISO 13506-2:2023-03 Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases (ISO/DIS 13506-2:2023); German and English version prEN ISO 13506-2:2023 / Note: Date of issue 2023-02-03
DIN EN 118:2014-03 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method); German version EN 118:2013
DIN EN 1854:2020-09 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances; German and English version prEN 1854:2020 / Note: Date of issue 2020-08-07*Intended as repl...
DIN EN 15270:2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking; English version of DIN EN 15270:2008-03
DIN EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012); German version EN ISO 7625:2012
DIN EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2006); German version EN ISO 7625:2010
DIN EN 1709:2005 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks; German version EN 1709:2004
DIN EN 14399-2:2015-04 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading; German version EN 14399-2:2015
DIN EN ISO 7625:2011 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO/DIS 7625:2011); German version prEN ISO 7625:2011
DIN EN 1860-3:2022 Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods; German and English version prEN 1860-3:2022
DIN EN 1860-3:2023-08 Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods; German version EN 1860-3:2023
DIN 32732:1989 Mechanically actuated combustion air flaps; safety requirements, testing and marking
DIN EN 14617-16:2005 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles; German version EN 14617-16:2005
DIN EN 1860-1:2018-09 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods; German version EN 1860-1:2013+A1:2017+AC:2017
DIN EN ISO 15349-2:2023-02 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021); German version EN ISO 15349-2:2021
DIN EN ISO 13506-2:2023 Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases (ISO/DIS 13506-2:2023); German and English version prEN ISO 13506-2:2023
DIN EN 1860-1:2018 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
DIN 25449:2016 Reinforced and prestressed concrete components in nuclear facilities - Safety concept, actions, design and construction
DIN 25449:2008 Reinforced and prestressed concrete components in nuclear facilities - Safety concept, actions, design and construction
DIN EN 46-1:2016-11 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method); German version EN 46-1:2016
DIN EN 46-1:2010 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method); German version EN 46-1:2009
DIN 19624:2014-12 Precoat filters for water treatment

Compressed Gas Association (U.S.), The role of burn-in

CGA H-10-2012 COMBUSTION SAFETY FOR STEAM REFORMER OPERATION

JP-JEM, The role of burn-in

JEM 1429-2008 Pre-operational testing programs for a.c.power supply systems for nuclear power plants

American Society of Mechanical Engineers (ASME), The role of burn-in

ASME STP-NU-083-2017 Blast Testing of Prestressed Concrete under Impulsive Loading
ASME QHO-1-2004 STANDARD FOR THE QUALIFICATION AND CERTIFICATION OF HAZARDOUS WASTE INCINERATOR OPERATORS
ASME SPPE-2-1988 Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations
ASME SPPE-2-1982 Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations
ASME SPPE-2-1977 Accreditation of testing laboratories for safety and pollution prevention equipment used in offshore oil and gas operations

PL-PKN, The role of burn-in

PN M77300 ArkusZ05-1973 House keeping enemel utensils made from iron-plate Kinds and methods of enemel coating Determination of resistans to soude caust|que
PN M80014-1971 Steal wires for prestressed constructions
PN B02015-1986 Actions on building structures Variable environmental actions Temperature action

BELST, The role of burn-in

STB 2251-2012 Polyethylene pipes used as outer casing for preinsulated pipes and fittings. Specifications
STB 1757-2007 Domestic cooking appliances burning gas. General specifications

Military Standards (MIL-STD), The role of burn-in

DOD A-A-54930-1994 ATTACHMENT, HEAD, HANDPIECE DENTAL, (PROPHYLAXIS, RIGHT ANGLE, ROUND SLEEVE, AUTOCLAVABLE)
DOD A-A-51576 A-1990 PREVENTIVE DENTISTRY PASTE (FLUORIDATED) [Use In Lieu Of: DOD A-A-0051576]

United States Navy, The role of burn-in

NAVY MIL-HDBK-1151-1993 MAINTENANCE AND OPERATION OF NAVAL RESERVE CENTERS, HANDBOOK FOR INSPECTION

The Society for Protective Coatings (SSPC), The role of burn-in

SSPC TR 4-2000 Preparation of Protective Coating Specifications for Atmospheric Service (NACE 80200)

Danish Standards Foundation, The role of burn-in

DS/EN 118:1992 Wood preservatives. Determination of preventive action against Reticulitermes santonensis de Feytaud. Laboratory method
DS/EN 46-2:2010 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method)
DS/EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
DS/CEN/TR 13768:2005 Characterisation of sludges - Good practice for combined incineration of sludges and household wastes
DS/EN 46/AC:1994 Wood preservatives-Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus(Linnaeus)(Laboratory method)
DS/HD 1004:1994 Mobile access and working towers made of prefabricated elements-Materials,dimensions,design loads and safety requirements
DS/ENV 725-11:1993 Advanced technical ceramics. Methods of test for ceramic powders. Part 11: Determination of the densification on natural sintering
DS/EN 118:2005 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
DS/EN 1709:2004 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks
DS/EN ISO 15349-2:2003 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
DS/EN 61249-4-14:2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t
DS/EN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
DS 465:1989 Dansk Ingeniorforening's Code of Practice for the structural use of prefabricated supporting building elements bases on cellular plastics
DS/ISO 15349-2:2021 Unalloyed steel – Determination of low carbon content – Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)

VN-TCVN, The role of burn-in

TCVN 4345-1986 Clay for production of hard-burnt tiles and bricks.Physico-mechanical test methods
TCVN 3138-1979 Bamboo preservation.Preventive method against wood staining and wood destroying fungi for bamboo used as raw material for paper production

Taiwan Provincial Standard of the People's Republic of China, The role of burn-in

CNS 3036-2003 Coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in concrete
CNS 13781-1996 Endurance Testing Methods for Infrared Emitting Diodes (for Automation)-Burn-In Test (Forward Bias)
CNS 13089-1992 Mothod of Endurance Test for Light Emitting Diode Big Lamps (for Outdoor Display)-Burn-in Test (Forward Bias)

ES-UNE, The role of burn-in

UNE-EN 46-2:2016 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method)
UNE-EN 118:2014 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
UNE-EN 1854:2023 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances
UNE-EN 14399-2:2016 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
UNE-EN ISO 15349-2:2022 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)
UNE-EN 46-1:2016 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method)

AENOR, The role of burn-in

UNE 26119:1987 SINTERED. SINTERED SELF-LUBRICANT FOR AUTOMOTIVE INDUSTRIES.
UNE-EN 298:2013 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
UNE-EN 1709:2006 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks
UNE-EN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The role of burn-in

GB 5135.14-2011 Automatic sprinkler systems.Part 14:Preaction devices
GB/Z 23740-2009 Code of practice for the prevention and reduction of lead contamination in foods
GB/T 16411-2023 General test method for domestic gas burning appliances
GB/T 17249.3-2012 Acoustics.Recommended practice for the design of low-noise workplaces containing machinery.Part 3:Sound propagation and noise prediction in workrooms

Lithuanian Standards Office , The role of burn-in

LST EN 46-2-2010 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method)
LST EN 298-2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
LST EN 298-2003 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
LST EN 118-2005 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
LST EN 1709-2004 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks
LST EN 61249-4-14-2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t
LST EN 1860-1-2003 Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
LST EN 1860-1-2003/A1-2006 Appliances, solid fuels and firelighters for barbecuing - Part 1: Barbecues burning solid fuels - Requirements and test methods

NL-NEN, The role of burn-in

NEN 5754-1992 Soil - Determination of organic matter content in soil as loss-on-ignition

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The role of burn-in

ASHRAE PH-97-13-4-1997 Residential Oil Burners with Low Input and Two-Stage Firing
ASHRAE NY-08-054-2008 Prediction of More Useful Work from a Person in Moderate@ Temperate Climate by Using the Second Law of Thermodynamics
ASHRAE OR-94-17-1994 Predicting Hourly Building Energy Usage: the Great Energy Predictor Shootout - the Aftermath

CZ-CSN, The role of burn-in

CSN 38 6515-1959 Skeleton and jacket of gas appliances for cooking, baking, grilling, roasting, etc.
CSN 36 1133-1985 Electric resistance tunnel furnaces intended for firing and glaze firing of fine ceramids. Technical requirements
CSN EN 46-1995 Wood preservatives.Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus(Linnaeus)(Laboratory method)
CSN 72 5008-1973 Testing of fired ceramic materials. Common regulations
CSN P 72 2081-8-2001 Fluidized bed ash and fluidized fly ash combustion for building industry purposes - Part 8: Fluidized bed ash and fluidized fly ash combustion for the production of artificial aggregates by clinkerink
CSN 42 6441-1970 Drawn steel wire for prestressing reinforement
CSN 06 1319-1968 Fuel-oil-fired kitchen range with boiling plate

Professional Standard - Electricity, The role of burn-in

DL/T 1741-2017 Preventive test procedure for small construction equipment used in electric power work

Standard Association of Australia （SAA）, The role of burn-in

AS 4118.1.5:1996 Fire sprinkler systems - Components - Deluge and pre-action valves
AS 4118.1.5:1996(R2013)
AS 1272:1974 Unsintered PTFE tape for thread sealing applications
AS/NZS 2728:1997 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements

国家能源局, The role of burn-in

SY/T 7048-2016 Recommended practice for pre-qualification of production qualification of steel plates for marine structures

GB-REG, The role of burn-in

REG NASA-LLIS-0871-2000 Lessons Learned ?Safety Precautions in Operational Procedures

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, The role of burn-in

REPORT 888-2-1990 SHORT-TERM FORECASTING OF CRITICAL FREQUENCIES@ OPERATIONAL MAXIMUM USABLE FREQUENCIES AND TOTAL ELECTRON CONTENT
REPORT 727-3-1990 SHORT-TERM PREDICTION OF SOLAR-INDUCED VARIATIONS OF OPERATIONAL PARAMETERS FOR IONOSPHERIC PROPAGATION

RU-GOST R, The role of burn-in

GOST 32652-2014 Polymer composites. Prepregs, premixes and laminates. Determination of the fiberglass and mineral filler content. Calcination methods
GOST R 56618-2015 Resources saving. Waste treatment. Technical requirements to the characteristics of coal ash and fly ash intended for secondary use
GOST R ISO 15349-2-2017 Unalloyed steel. Determination of low carbon content. Part 2. Infrared absorption method after combustion in induction furnace (with preheating)
GOST IEC 60335-2-88-2013 Safety household and similar electrical appliances. Part 2-88. Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems
GOST 16569-1986 Burners for domestic gas heaters. Specifications

The American Road & Transportation Builders Association, The role of burn-in

AASHTO M 198-2008 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

Japanese Industrial Standards Committee (JISC), The role of burn-in

JIS F 7011:1998 Shipbuilding -- Application of incinerator for marine use
JIS K 6299:2012 Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures
JIS S 2038:1995 Wicks for oil burning appliances
JIS C 5260-2:2000 Potentiometers for use in electronic equipment -- Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometers
JIS C 9335-2-38:2005 Household and similar electrical appliances -- Safety -- Part 2-38: Particular requirements for commercial electric griddles and griddle grills
JIS C 9335-2-38:2016 Household and similar electrical appliances -- Safety -- Part 2-38: Particular requirements for commercial electric griddles and griddle grills
JIS G 1211-4:2011 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating
JIS B 8415:1982 General safety code for industrial combustion furnaces
JIS C 3665-1-2:2007 Tests on electric and optical fibre cables under fire conditions -- Part 1-2: Test for vertical flame propagation for a single insulated wire or cable -- Procedure for 1kW pre-mixed flame

IX-FAO, The role of burn-in

CAC/RCP 78-2017 Code of practice for the prevention and reduction of mycotoxins in spices
CAC/RCP 51-2016 Code of Practice for the Prevention and Reduction of Mycotoxin Contamination in Cereals
CAC/RCP 59-2010 Code of practice for the prevention and reduction of aflatoxin contamination in tree nuts
CAC/RCP 55-2004 Code of Practice for the Prevention and Reduction of Aflatoxin Contamination in Peanuts
CAC/RCP 60-2005(En) Code of practice for preventing and reducing inorganic tin contamination in canned foods
CAC/RCP 60-2005(Ch) Code of practice for preventing and reducing inorganic tin contamination in canned foods
CAC/RCP 69-2009 Code of Practice for the Prevention and Reduction of Ochratoxin A Contamination in Coffee
CAC/RCP 72-2013 Code of practice for the prevention and reduction of ochratoxin a contamination in cocoa

NATO - North Atlantic Treaty Organization, The role of burn-in

AMEDP-4.3-2014 HUMAN RABIES PROPHYLAXIS IN OPERATIONAL SETTINGS (ED A@ VER 1)

American National Standards Institute （ANSI), The role of burn-in

ANSI/ASTM F1323:2008 Specification for Shipboard Incinerators
ANSI/ASME QHO-1-2004 Qualification and Certification of Hazardous Waste Incinerator Operators
ANSI/ASTM E2690:2010 Practice for Specimen Preparation and Mounting of Caulks & Sealants to Assess Surface Burning Characteristics
ANSI/ASME QFO-1-1998 Qualification of High Capacity Fossil Fuel Fired Plant Operators
ANSI/ASTM E2573:2012 Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
BS EN 1860-3:2023 Appliances, solid fuels and firelighters for barbecuing Firelighters for igniting solid fuels for use in barbecues and grill applications. Requirements and test methods (British Standard)
ANSI/TAPPI T262 sp-2012 Preparation of mechanical pulps for testing
ANSI Z21.8-1994 Installation of Domestic Gas Conversion Burners
ANSI C78.1402-2004 Dimensions for Projection Lamps - G17q and GX17q Based Four-pin, Prefocus, for Base-down Operation

IT-UNI, The role of burn-in

UNI EN 60-1977
UNI EN ISO 15349-2:2021 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
UNI 7262-1973

US-CFR-file, The role of burn-in

CFR 40-241.4-2014 Protection of Environment. Part241:Solid wastes used as fuels or ingredients in combustion units. Section241.4:Non-Waste Determinations for Specific Non-Hazardous Secondary Materials When Used as a Fuel.
CFR 40-241.2-2014 Protection of Environment. Part241:Solid wastes used as fuels or ingredients in combustion units. Section241.2:Definitions.
CFR 40-241.3-2014 Protection of Environment. Part241:Solid wastes used as fuels or ingredients in combustion units. Section241.3:Standards and procedures for identification of non-hazardous secondary materials that are solid wastes when used as fuels or ingredients in comb

ZA-SANS, The role of burn-in

SANS 11690-3:1997 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms

International Electrotechnical Commission (IEC), The role of burn-in

ISO/TR 21954:2018 Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator
ISO/TR 21954:2018 Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator
ISO TR 21954:2018 Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator
IEC 61249-4-18:2013 Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (v

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The role of burn-in

GB/T 34615-2017 Determination of combustion characteristics of CMSW for coprocessing in cement kiln

Underwriters Laboratories (UL), The role of burn-in

UL 2154-2000 Fire tests of surgical fabrics
UL 1975-1990 Fire tests for foamed plastics used for decorative purposes
UL 1975-1996 Fire tests for foamed plastics used for decorative purposes

API - American Petroleum Institute, The role of burn-in

API RP 12N-1986 RECOMMENDED PRACTICE FOR THE OPERATION@ MAINTENANCE AND TESTING OF FIREBOX FLAME ARRESTORS FIRST EDITION
API PSD 2211-1971 PRECAUTIONS WHILE WORKING IN REACTORS HAVING AN INERT ATMOSPHERE (First Edition)
API BULL T-5-1983 EMPLOYEE MOTIVATION PROGRAMS FOR SAFETY AND PREVENTION OF POLLUTION IN OFFSHORE OPERATIONS SECOND EDITION
API BULL T-5-1974 EMPLOYEE MOTIVATION PROGRAMS FOR SAFETY AND PREVENTION OF POLLUTION IN OFFSHORE OPERATIONS (FIRST EDITION)

American Petroleum Institute (API), The role of burn-in

API RP 2207-2022 Preparing Tank Bottoms for Hot Work

IETF - Internet Engineering Task Force, The role of burn-in

RFC 6113-2011 A Generalized Framework for Kerberos Pre-Authentication
RFC 7417-2014 Extensions to Generic Aggregate RSVP for IPv4 and IPv6 Reservations over Pre-Congestion Notification (PCN) Domains
RFC 3175-2001 Aggregation of RSVP for IPv4 and IPv6 Reservations

KR-KS, The role of burn-in

KS P 0236-2018(英文版) Air cushions for pressure sore preventing cushions
KS P 0234-2018(英文版) Air mattresses for pressure sore prevention

Association of German Mechanical Engineers, The role of burn-in

DVS 0907-2-1981 Determination of the burn-out pickup and burn-out of submerged-arc welding flux in the welding of unalloyed and low-alloy steels with solid wire electrodes; determination of the limits of the burn-out pickup and burn-out

Indonesia Standards, The role of burn-in

SNI 1739-2008 Testing methods for fire spread tests at the surface of building materials for fire protection in houses and buildings
SNI 7833-2012 Tata cara perancangan beton pracetak dan beton prategang untuk bangunan gedung
SNI 03-6813-2002 Procedure for making test cylinders and prisms for determining strength and density of preplaced-agregate concrete in laboratory

Professional Standard - Nuclear Industry, The role of burn-in

EJ/T 20121-2016 Development and revision for operational intervention levels under accident condition of Reactor

European Committee for Electrotechnical Standardization（CENELEC）, The role of burn-in

EN 61249-4-14:2009 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t
HD 1000-1988 Service and Working Scaffolds Made of Prefabricated Elements Materials, Dimensions, Design Loads and Safety Requirements

FI-SFS, The role of burn-in

SFS 5415-1987

TR-TSE, The role of burn-in

TS 439-1967 DETERMINATION OF CHLORINE ?N COAL BY THE BOMB - COMBUSTION METHOD
TS 441-1967 DETERMINATION OF CHLORINE ?N COAL BY THE HIGH TEMPERATURE COMBUST?ON METHOD

GM North America, The role of burn-in

GM GM211M-1993 Selection and Use of Sintered Metal Powder

IX-UIC, The role of burn-in

UIC O 918-1-2011 Electronic reservation of seats/berths and electronic production of travel documents - exchange of messages

Canadian Standards Association (CSA), The role of burn-in

CSA/AM CSA/ANSI Z21.40.1-1996 Gas-Fired, Heat Activated Air Conditioning and Heat Pump Appliances First Edition; CSA/CGA 2.91-M96; Addenda A-1997

CU-NC, The role of burn-in

NC 54-369-1987 Construction Materials Concrete Precast Elements for Hydraulic Works. Quality Specifications

TN-INNORPI, The role of burn-in

NT AB 042-1972
NT AB 025-1970 Drogers voor het linnen

TH-TISI, The role of burn-in

TIS 2249-2005 Plastics.guidance for the use of standard fire tests

GOSTR, The role of burn-in

GOST 9744-1987 Coals of the Far East for pulverized burning. Specifications