ZH
RU
ES

Median particle size and median diameter

Median particle size and median diameter, Total:82 items.

In the international standard classification, Median particle size and median diameter involves: Linear and angular measurements, Electromechanical components for electronic and telecommunications equipment, Petroleum products in general, Construction materials, Insulating fluids, Particle size analysis. Sieving, Products of the chemical industry, Production of metals, Aerospace fluid systems and components, Electrical accessories, Bearings, Products of non-ferrous metals, Data storage devices, Air quality, Fluid storage devices, Components for aerospace construction, Structures of buildings, Powder metallurgy, Fasteners, Pipeline components and pipelines, Cutting tools, Energy and heat transfer engineering in general.

IETF - Internet Engineering Task Force, Median particle size and median diameter

RFC 5580-2009 Carrying Location Objects in RADIUS and Diameter

Association Francaise de Normalisation, Median particle size and median diameter

NF G32-303:1981 Habillement - Accessoires pour vêtements - Boutons à queue - Diamètre et position du trou .
NF C27-232:1990 Methods for counting and sizing particles in insulating liquids.
NF EN ISO 22476-7:2013 Reconnaissance et essais géotechniques - Essais en place - Partie 7 : essai au dilatomètre rigide diamétral
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
NF E29-682:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 34 - taper 8,732 % (5o) - Pitch 2 SI
NF E29-682:1980 Gas cylinders. Taper screw thread for valve stem and culinder neck assembly. Nominal diameter 34 taper 8 732 per cent (5 degrees), pitch 2 si.
NF E29-680:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 25,8, taper 3/26 (6o 38'), 14 Tpi SI
NF E29-680:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8, taper 3/26 (6 degrees 38', 14 tpi si.
NF L31-221*NF EN 2015:1985 Aerospace series. Bearing, airframe rolling, double row self-aligning ball bearings, in steel, diameter series 2, dimensions and loads.
NF L31-228*NF EN 2018:1985 Aerospace series. Bearings, airframe rolling, single row self-aligning roller bearings, in steel, diameter series 3 and 4, dimensions and loads.
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF L31-219*NF EN 2017:1985 Aerospace series. Bearings, airframe rolling, double row self-aligning ball bearings, in corrosion resisting steel, diameter serie 2, dimensions and loads.
NF E29-683:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 34 - Taper 8.736 per cent (5 degrees C), Pitch 2 SI. Gauge erquirements.
NF L31-229*NF EN 2020:1985 Aerospace series-. Bearings, airframe rolling, single row self-aligning roller bearings, in corrosion resisting steel, diameter series 3 and 4, dimensions and loads.
NF L31-269*NF EN 3289:1994 Aerospace series. Bearings, airframe rolling. Double row self-aligning ball bearings in cdorrosion resisting steel. Diameter series 2. Dimensions and loads.
NF L31-270*NF EN 3290:1994 Aerospace series. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads.
NF L31-272*NF EN 3292:1994 Aerospace series. Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Diameter series 3 and 4. Dimensions and loads.
NF E29-681:1981 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8 - Taper 3/26 (6 degrees C 38'), 14 TPI SI. Gauge requirements.
NF EN 3291:1994 Série aérospatiale - Roulements pour structures d'aéronefs - Roulements en acier, cadmiés, à rotule, sur une rangée de rouleaux - Séries de diamètres 3 et 4 - Dimensions et charges.

German Institute for Standardization, Median particle size and median diameter

DIN 2241:2006 Geometrical product specifications (GPS) - Screw setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
DIN SPEC 51455:2018 Liquide petroleum products - Determination of particle number and particle size in oils
DIN 2241:2018 Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
DIN 41633:1981 Rotary wafer switches 17 mm diameter; 10 and 12 positions axial soldering; dimensions, ratings, requirements and tests
DIN 2250-1:2008 Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter
DIN 2250-2:2008 Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 2: From 1 mm up to 315 mm nominal diameter for precision mechanics

Professional Standard - Electron, Median particle size and median diameter

SJ 2691-1986 Rotary wafer switches (low current rating) with cental mounting and two-hole positioning,maximum number of position,maximum diameter 42mm,Type KX13
SJ 2688-1986 Rotary wafer switches (low current rating) with central mounting,without stop,maximum diameter 25mm,Type KX07
SJ 738-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions:12;maximum diameter:40mm,Type KX03
SJ 740-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions:12;maximum diameter:25mm,Type KX05
SJ 2687-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 16mm,Type KX06
SJ 2689-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 55mm,Type KX10
SJ 2690-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 55mm,Type KX11
SJ 2692-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 25mm,Type KX15
SJ 2693-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 25mm,Type KX15
SJ 2694-1986 Rotary wafer switches (low current rating) with central mounting,maximum number of positions 12,maximum diameter 30mm,Type KX17
SJ 119-1986 Rotary wafer switches (low current rating),with central mounting,maximum number of positions;12,maximum diameter:55mm,Type KX01
SJ 739-1986 Rotary wafer switches(low current rating) with central mounting,maximum number of positions:12;maximum diameter:30mm,Type KX04
SJ/Z 9046-1987 Information processing - Magnetic disk for data storage devices - 107,500 flux transitions per track, with OD of 266 and 356mm

ZA-SANS, Median particle size and median diameter

SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)
SANS 6244:2006 Particles of diameter not exceeding 20 ?m and not exceeding 5 ?m and smaller, respectively, in fine aggregate (pipette method)
SANS 1700-7-2:1996 Fasteners Part 7: External drive hexagon bolts and screws Section 2: Hexagon head bolts - Product grade B - Reduced shank (shank diameter approximately equal to pitch diameter)

Society of Automotive Engineers (SAE), Median particle size and median diameter

SAE RS-341-3-1952 RS341 Circular Flange and Drive (Pinion Located) 8.000" P.C. Dia. x 1.125"
SAE AS893D-2009 Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Side, External Thread

Japanese Industrial Standards Committee (JISC), Median particle size and median diameter

JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts

PL-PKN, Median particle size and median diameter

PN M57025-1974 Holes in steel and cas? iron Diamefers of drills and reamers
PN T90361-1988 Trunk cables with smali diameter coaxial pairs Armoured and non-armoured cables with lead sheath and plastic oversheaths
PN T90362-1988 Trunk cables with smali diameter coaxiai pairs Armoured and non-armoured cables with aluminium sheath d plastic oversheaths

IN-BIS, Median particle size and median diameter

IS 6339-1971

International Electrotechnical Commission (IEC), Median particle size and median diameter

IEC 60132-4:1966 Rotary wafer switches (low current rating). Part 4 : Rotary wafer switches with central mounting: maximum 12 positions: maximum diameter 40 mm
IEC 60132-7:1981 Rotary wafer switches (low current rating). Part 7 : Rotary wafer switches with central mounting; maximum 12 positions and maximum diameter 20 mm

American Society for Testing and Materials (ASTM), Median particle size and median diameter

ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

RU-GOST R, Median particle size and median diameter

GOST 13219.13-1981 Medium cups with grooves for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
GOST 13219.14-1981 Medium cups with grooves for fat, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
GOST 13219.7-1981 Medium cups with cup seal for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
GOST 13219.8-1981 Medium cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
GOST 22801-1983 Assembly units and pipeline parts. Flanged reducing and open branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST R 50035-1992 Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction
GOST R 50037-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 4 mm. Construction
GOST R 50038-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside dimeter with modul from 3 to 5. Construction

International Organization for Standardization (ISO), Median particle size and median diameter

ISO 5193:1981 Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)

Korean Agency for Technology and Standards (KATS), Median particle size and median diameter

KS C IEC 61020-2-2-2002(2012) Electromechanical switches for use in electronic equipment－Part 2：Sectional specification for rotary switches－Section 2：Detail specification for rotary switches with central mounting, 12 positions, 17
KS C IEC 61020-2-2:2002 Electromechanical switches for use in electronic equipment-Part 2:Sectional specification for rotary switches-Section 2:Detail specification for rotary switches with central mounting, 12 positions, 17 mm diameter
KS C IEC 61020-2-2:2014 Electromechanical switches for use in electronic equipment－Part 2：Sectional specification for rotary switches－Section 2：Detail specification for rotary switches with central mounting, 12 positions, 17 mm diameter
KS W ISO 14191:2004 Aerospace-Airframe spherical roller bearings, single-row,self-aligning, diameter series 3 and 4-Metric series
KS W ISO 14191:2016 Aerospace－Airframe spherical roller bearings, single-row,self-aligning, diameter series 3 and 4－Metric series

Association of German Mechanical Engineers, Median particle size and median diameter

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)

European Committee for Standardization (CEN), Median particle size and median diameter

EN 3288:1994 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2 - Dimensions and loads

American Bearing Manufacturers Association, Median particle size and median diameter

ABMA 14191-1997 Aerospace - Airframe Spherical Roller Bearings, Single-Row, Self-Aligning, Diameter Series 3 and 4 - Metric Series

Lithuanian Standards Office , Median particle size and median diameter

LST 1512.1-1998 Reinforced concrete structures. Non-destructive methods. Determining the concrete cover, diameter and location of reinforcement bars by means of magnetic method

Aerospace, Security and Defence Industries Association of Europe (ASD), Median particle size and median diameter

ASD-STAN PREN 2015-1982 Bearings-Airframe Rolling Double Row Self Aligning Ball Bearings in Steel Diameter Series 2 Dimensions and Loads Aerospace Series (Edition 3)

AENOR, Median particle size and median diameter

UNE 15331-4:2005 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes

GOSTR, Median particle size and median diameter

GOST ISO 10791-4-2017 Machining centres. Part 4. Accuracy and repeatability of positioning of linear and rotary axes

ETSI - European Telecommunications Standards Institute, Median particle size and median diameter

TR 125 907-2010 Universal Mobile Telecommunications System (UMTS); Evaluation of the inclusion of path loss based location technology in the UTRAN (V9.0.1; 3GPP TR 25.907 version 9.0.1 Release 9)

Shanxi Provincial Standard of the People's Republic of China, Median particle size and median diameter

DB14/ 1062-2015 Comprehensive energy consumption limit per unit product of granulated blast furnace slag powder used in cement and concrete