ZH
RU
ES

Resin isotropic material

Resin isotropic material, Total:55 items.

In the international standard classification, Resin isotropic material involves: Reinforced plastics, Plastics, Insulating materials.

Standard Association of Australia （SAA）, Resin isotropic material

AS 1145.4:2001 Determination of tensile properties of plastics materials - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

Danish Standards Foundation, Resin isotropic material

DS/EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites
DS/EN 60455-3-5:2006 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins
DS/EN 60455-3-4:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds

Association Francaise de Normalisation, Resin isotropic material

NF T51-034-4*NF EN ISO 527-4:2021 Plastics - Determination of tensile properties - Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites
NF EN ISO 527-4:2023 Plastiques - Détermination des propriétés en traction - Partie 4 : conditions d'essai pour les composites plastiques renforcés de fibres isotropes et orthotropes
NF T51-034-4:1997 Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.

ES-UNE, Resin isotropic material

UNE-EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021, Corrected version 2022-02)
UNE-EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories (Endorsed by Asociación Española de Normalización in September of 2021.)

British Standards Institution (BSI), Resin isotropic material

BS EN ISO 527-4:2023 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS EN 60455-3-5:2002 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unsaturated polyester based impregnating resins - Sheet 5: Unsaturated polyester based impregnating resins
20/30409900 DC BS EN ISO 527-4. Plastics. Determination of tensile properties. Part 4. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins
BS EN IEC 60893-3-6:2004+A2:2018 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 61212-3-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes
17/30365113 DC BS EN 60455-3-8. Resin based reactive compounds used for electrical insulation. Part 3. Specifications for individual materials - Sheet 8: Resins for cable accessories
BS EN 61212-3-3:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
BS EN 61212-3-1:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated rolled tubes
BS EN 61212-3-3:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded rods
BS EN 61212-3-2:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes

VN-TCVN, Resin isotropic material

TCVN 4501-4-2009 Plastics.Determination of tensile properties.Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Resin isotropic material

GB/T 1040.4-2006 Plastics. Determination of tensile properties. Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

AENOR, Resin isotropic material

UNE-EN ISO 527-4:1997 PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES (ISO 527-4:1997).

ESDU - Engineering Sciences Data Unit, Resin isotropic material

ESDU 89048-1989 Elastic stress concentration factors. Geometric discontinuities in rods and tubes of isotropic materials.
ESDU 09014-2009 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
ESDU 09014 A-2013 Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material
ESDU 69020 C-1993 Elastic stress concentration factors. Geometric discontinuities in flat bars or strips of isotropic materials.
ESDU 80027 C-1995 Elastic stress concentration factors. Single reinforced and unreinforced holes in infinite plates of isotropic materials.
ESDU 72012 B-1978 Information on the use of Data Items on the buckling of plates and compression panels manufactured from isotropic materials.
ESDU 73007 A-1983 Stiffness of loaded flat strips under sinusoidally distributed bending couples at their edges (for use in local buckling calculations). (Uniaxial or biaxial loading. Isotropic or orthotropic materials.)

German Institute for Standardization, Resin isotropic material

DIN EN ISO 527-4:2023-07 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023); German version EN ISO 527-4:2023
DIN EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021)
DIN EN 61212-3-3:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006); German version EN

Korean Agency for Technology and Standards (KATS), Resin isotropic material

KS C IEC 60893-3-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 2:Requirements for rigid laminated sheets based on epoxide resins
KS C IEC 60893-3-3:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 3:Requirements for rigid laminated sheets based on melamine resins
KS C IEC 60455-3-5:2020 Resin based reactive compounds used for electrical insulation —Part 3: Specifications for individual materials —Sheet 5: Unsaturated polyester based impregnating resins
KS C IEC 60404-6-2015(2020) Magnetic materials－Part 6：Methods ofmeasurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
KS M ISO 527-4-2002(2017) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
KS C IEC 60455-3-1:2020 Resin based reactive compounds used for electrical insulation —Part 3: Specifications for individual materials —Sheet 1: Unfilled epoxy resinous compounds
KS M ISO 527-4-2002(2022) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
KS C IEC 60893-3-1:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 1:Types of industrial rigid laminated sheets
KS C IEC 60455-3-4:2020 Resin based reactive compounds used for electrical insulation —Part 3: Specifications for individual materials —Sheet 4: Filled polyurethane compounds

International Electrotechnical Commission (IEC), Resin isotropic material

IEC 60893-3-2:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-2/AMD1:1998 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxyde resin; Amendment 1

KR-KS, Resin isotropic material

KS C IEC 60455-3-5-2020 Resin based reactive compounds used for electrical insulation —Part 3: Specifications for individual materials —Sheet 5: Unsaturated polyester based impregnating resins
KS C IEC 60455-3-1-2020 Resin based reactive compounds used for electrical insulation —Part 3: Specifications for individual materials —Sheet 1: Unfilled epoxy resinous compounds
KS C IEC 60455-3-4-2020 Resin based reactive compounds used for electrical insulation —Part 3: Specifications for individual materials —Sheet 4: Filled polyurethane compounds

International Organization for Standardization (ISO), Resin isotropic material

ISO 527-4:2023 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-4:2021 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

Lithuanian Standards Office , Resin isotropic material

LST EN 60455-3-5-2006 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins (IEC 60455-3-5:2006)
LST EN ISO 527-4:2000 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997)

European Committee for Standardization (CEN), Resin isotropic material

EN 60893-3-1:2004 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-1: Specifications for individual materials — Requirements for types of industrial rigid laminated sheets

European Committee for Electrotechnical Standardization（CENELEC）, Resin isotropic material

EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets

CENELEC - European Committee for Electrotechnical Standardization, Resin isotropic material

EN 60893-3-1:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Types of Industrial Rigid Laminated Sheets

Aerospace, Security and Defence Industries Association of Europe (ASD), Resin isotropic material

ASD-STAN PREN 4366-2001 Aerospace Series Heat and Crazing Resistant Cast Acrylic, Crosslinked, Multi-Axially Stretched, and Low Moisture Absorption Properties (Edition P 1)