ZH
RU
ES

Lao flow range

Lao flow range, Total:496 items.

In the international standard classification, Lao flow range involves: Fibre optic communications, Valves, Industrial automation systems, Radiation measurements, Measurement of fluid flow, Electricity. Magnetism. Electrical and magnetic measurements, Electromagnetic compatibility (EMC), Nuclear energy engineering, Plastics, Seals, glands, Welding, brazing and soldering, Metrology and measurement in general, Audio, video and audiovisual engineering, Medical equipment, Hydraulic energy engineering, Non-destructive testing, Applications of information technology, Ground service and maintenance equipment, Fuels, Machine tool systems, Linear and angular measurements, Electric road vehicles, Fluid power systems, Acoustics and acoustic measurements, Lifting equipment, Power transmission and distribution networks, Integrated circuits. Microelectronics, Insulation, Switchgear and controlgear, Alarm and warning systems, Geology. Meteorology. Hydrology, Optics and optical measurements, Installations in buildings, Buildings, Shop fittings, Thermodynamics and temperature measurements, Materials for aerospace construction, Electrical accessories, Air quality, Resistors, Metalliferous minerals, Aircraft and space vehicles in general, Photography, Coatings and related processes used in aerospace industry, Clothes, Transport, Packaging and distribution of goods in general, SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT. ADMINISTRATION. TRANSPORT, Quality, Postal services, Road engineering, Radiation protection, Shipbuilding and marine structures in general, Natural gas, Petroleum products in general, Information technology (IT) in general, Capacitors, Magnetic materials, Soil quality. Pedology, Milk and milk products, Road vehicle systems, Telecommunications in general, Leisure. Tourism, Iron and steel products, Small craft, Terminology (principles and coordination), Bearings, Wastes, Testing of metals, Microprocessor systems, Vocabularies, Construction materials, HEALTH CARE TECHNOLOGY, Petroleum, petroleum products and natural gas handling equipment, Open systems interconnection (OSI), Protection against electric shock, Electrical equipment for working in special conditions, Television and radio broadcasting.


German Institute for Standardization, Lao flow range

  • DIN 19204:1976 Flow measurement; ranges, divisions and inscriptions of scales for flow indicators
  • DIN EN 60534-2-4:2009-11 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability (IEC 60534-2-4:2009); German version EN 60534-2-4:2009 / Note: DIN IEC 60534-2-4 (1990-11) remains valid alongside this standard until 2012-06-01.
  • DIN 3771-3:1984 Fluid systems; O-rings; materials, field of application
  • DIN 67519:1970 Actinity in the field of optics; definition, measurement, application
  • DIN 41096-4:1979 Electric sirens for a.c. voltages from 125 to 500 V; protective shield
  • DIN 41096-3:1979 Electric sirens for a.c. voltages from 125 to 500 V; rating plate
  • DIN 50472:1981-03 Testing of permanent magnets; determination of the magnetic flux values in the working range
  • DIN 2271-2:1976 Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range
  • DIN 41096-2:1979 Electric sirens for a.c. voltages from 125 to 500 V; technical delivery terms
  • DIN 50472:1981 Testing of permanent magnets; determination of the magnetic flux values in the working range
  • DIN EN ISO 19157/A1:2018-06 Geographic information - Data quality - Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018); English version EN ISO 19157:2013/A1:2018
  • DIN 12836-1:1969 Milk butyrometers 0-5 % and above
  • DIN EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements; German version EN 15456:2008
  • DIN 12836-3:1975 Apparatus for dairy analyses; milk butyrometer 0 to 10 %, calibrated
  • DIN 41096-1:1979 Electric sirens for a.c. voltages from 125 to 500 V; main dimensions and technical values
  • DIN ISO 16703:2005 Soil quality - Determination of content of hydrocarbon in the range C<(Index)10> to C<(Index)40> by gas chromatography (ISO 16703:2004);English version of DIN ISO 16703:2005
  • DIN EN 13284-1:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2017
  • DIN EN IEC 63009:2021-04 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 20 kHz to 500 kHz (IEC 63009:2019); German version EN IEC 63009:2019
  • DIN EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems; German version EN 13284-2:2004
  • DIN 12836-2:1966 Apparatus for dairy analyses; milk butyrometer 0 to 4%, calibrated
  • DIN 4002-5:2010 Properties and their scopes for product data exchange - Part 5: Units for quantitative properties
  • DIN EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; German version EN 14039:2004
  • DIN EN 14039:2005-01 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; German version EN 14039:2004
  • DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
  • DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).

VN-TCVN, Lao flow range

American National Standards Institute （ANSI), Lao flow range

Instrument Society of America (ISA), Lao flow range

ISA - International Society of Automation, Lao flow range

  • ISA 75.11-1985 Inherent Flow Characteristic and Rangeability of Control Valves
  • ISA RP31.1-1977 Specification@ Installation@ and Calibration of Turbine Flowmeters

Association Francaise de Normalisation, Lao flow range

  • NF C46-506:1990 Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.
  • FD X10-152*FD ISO/TR 15377:2021 Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
  • NF C46-506*NF EN 60534-2-4:2009 Industrial-process control valves - Part 2-4 : flow capacity - Inherent flow characteristics and rangeability.
  • NF E11-107:2002 Geometrical Product Specification (GPS) - Spheres for metrology
  • NF A84-540:2018 Oxyacétylène welding and heating blowpipes - Nozzles and nozzles adaptors - Range of normal flowrates and dimensions
  • NF A84-540:1990 Oxyacetylene welding and heating blowpipes. Nozzles and nozzles adaptors. Range of normal flowrates and dimensions.
  • NF X10-314:1983 Liquid flow measurement in open channels by weirs and flumes. End-depth method for estimation of flow in rectangular channels with a free overfall.
  • NF C97-909:2008 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz.
  • NF E44-005*NF EN 12262:1999 Rotodynamic pumps - Technical documents - Terms, delivery range, layout
  • NF E48-151:2000 Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities.
  • NF E15-025:1985 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. SPAN FROM 2,5 MBAR TO 250 MBAR.
  • NF E15-026:1985 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. SPAN FROM 0,4 BAR TO 1600 BAR.
  • NF Z82-054*NF ETS 300054:1994 Integrated Services Digital Network (ISDN). Terminal portability (tp) supplementary service. Functional capabilities and information flows.
  • NF X43-333-1*NF EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : Manual gravimetric method
  • NF M60-520:1989 Dosimetry of X and gamma reference radiations for radiation protection over the energy range from 8 kev to 1,3 mev.
  • NF X43-333-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : automated measuring systems.
  • NF X30-405*NF EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
  • NF C86-255:1991 Harmonized system of quality assessment for electronic components programmable logic arrays (pla). Blank detail specification.
  • NF EN IEC 63009:2019 Ultrasons - Systèmes de physiothérapie - Spécifications des champs et méthodes de mesure dans la plage de fréquences de 20 kHz à 500 kHz
  • NF EN IEC 61689:2022 Ultrasons - Systèmes de physiothérapie - Spécifications des champs et méthodes de mesure dans la plage de fréquences de 0,5 MHz à 5 MHz
  • NF C18-472:2005 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation.
  • NF C18-472*NF EN 61472:2013 Live working - Minimum approach distances for ac systems in the voltage range 72,5 kV to 800 kV - A method of calculation
  • NF X43-333-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : manual gravimetric method.

RU-GOST R, Lao flow range

  • GOST 8.357-1979 State system for ensuring the uniformity of measurements. Laser radiation measuring instruments. Energy, spectral and time renges
  • GOST R 8.867-2014 State system for ensuring the uniformity of measurement. Measuring instruments of direct current in range from 1·10 v stepeni -15 to 1·10 v stepeni -9 A. Verification procedure
  • GOST 8.144-1997 State system for ensuring the uniformity of measurements. State verification schedule for measuring means of magnetic induction of state magnetic fields within the range from 0,05 TO 2 T
  • GOST R 56510-2015 Metrological assurance in the field of non-destructive testing
  • GOST 8.144-1975 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring magnetic induction within the range of 0,05 to 2T
  • GOST 8.145-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of liquids within the range of 3·10 in minus 6 degree up to 10 m3/sec
  • GOST R 8.833-2013 State system for ensuring the uniformity of measurements. State verification system for measuring equipment of DC voltage range ± (1 ... 500) kV
  • GOST 8.373-1980 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of petroleum products within the range of 2,8·10 in minus 6 degree up to 2,8·10 in minus 2 degree m3/s
  • GOST 8.374-1980 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of water within the range of 2,8·10 in minus 8 degree up to 2,8·10 in minus 2 degree m3/sec
  • GOST R 8.797-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the heat flux surface density in the range from 1 to 10000 W/m2
  • GOST 8.486-1983 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring the velocity of water flow in the range of 0.005-25 m/s
  • GOST 9920-1989 A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation
  • GOST 8.132-1974 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring current intensities from 0,04 up to 300 A within the frequency range of 0,1 up tp 300MHz
  • GOST 25380-1982 Buildings and structures. Method of measuring density of heat flows passing through englosure structures
  • GOST R 8.767-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of alternating current from 1·10 -8 to 100 A in the frequency range from 1·10 -1 to 1·10 6 Hz
  • GOST 8.157-1975 State system for ensuring the uniformity of measurements. The temperature practical scales
  • GOST 8.644-2014 State system for ensuring the uniformity of measurements. National hierarchy scheme for measuring instruments of lightning discharge pulse current strength in range from 1 to 100 kA
  • GOST R 8.643-2008 State system for ensuring the uniformity of measurements. Reflectometers for extreme ultraviolet in region 10 - 30 nm. Verification procedure
  • GOST 8.503-1984 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring length within the range of 24-75000 m
  • GOST 9932-1975 Laboratory glass flowmeters. Specifications
  • GOST 8.061-1980 State system for ensuring the uniformity of measurements. Verification schedules. Scope and layont
  • GOST 30756-2001 Fluxes for electroslag technologies. General specifications
  • GOST R 8.648-2015 State system for ensuring the Uniformity of measurements. State verification schedule for measuring instruments of alternate electrical voltage to 1000 V in the frequency range from 1·10-2 to 2·10-9 Hz
  • GOST 8.564-1998 State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical capacity in frequency range from 1 to 100 MHz
  • GOST 16863-1971 Measuring generators for frequency range 0,1-35 MHz. Methods and means of verification
  • GOST 8.143-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of gas within the range of 1x10 in minus 6 up to 1x10 in 2 degree m3/s
  • GOST R 50193.1-1992 Measurement of water flow in closed conduits. Meters for cold potable water. Specifications
  • GOST R 55194-2012 Electrical equipment and installation for a.c. voltages from 1 to 750 kV. General methods of dielectric tests
  • GOST R 8.746-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the ratio error and phase displacement of a.c. power frequency voltage in the range from 0,1/V3 do 750/V3 kB
  • GOST 8.369-1979 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of gas within the range of 4x10 in minus 2 degree up to 2,5x10 in 2 degree kg/sec
  • GOST R 55195-2012 Eltctrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation
  • GOST R 8.648-2008 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring of alternate electrical voltage to 1000 V in the frequency range from 1·10 in minus 2 degree up to 2·10 in 9 degree Hz
  • GOST 8.560-1994 State system for ensuring the uniformity of measurements. State verification shedule for measure of electric field intensity measuring within freguency range 0.0003-1000 MGz
  • GOST 13045-1981 General industrial rotameters. General specifications

Korean Agency for Technology and Standards (KATS), Lao flow range

  • KS B ISO TR 15377-2014(2019) Measurement of fluid flow by means of pressure-differential devices — Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167－1
  • KS B ISO TR 15377:2004 Measurement of fluid flow by means of pressure-differential devices-Guidelines for specification of nozzles and orifice plates beyond the scope of KS B ISO 5167-1
  • KS B ISO TR 15377:2014 Measurement of fluid flow by means of pressure-differential devices — Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1
  • KS M 3007-1980(2001) DETERMINATION OF THE RESISTANCE OF PLASTICS TO CHEMICAL SUBSTANCES
  • KS M 3007-1980 DETERMINATION OF THE RESISTANCE OF PLASTICS TO CHEMICAL SUBSTANCES
  • KS C IEC 60534-2-4:2004 Industrial-process control valves-Part 2:Flow capacity-Section 4:Inherent flow characteristics and rangeability
  • KS E 3702-1982(2002) METHODS FOR SAMPLING AND DETERMINATION OF TOTAL MOISTURE AND ADHERENT MOISTURE OF COAL AND COKE
  • KS E 3702-1982 METHODS FOR SAMPLING AND DETERMINATION OF TOTAL MOISTURE AND ADHERENT MOISTURE OF COAL AND COKE
  • KS B ISO 2374:2018 Lifting appliances — Range of maximum capacities for basic models
  • KS B ISO 2374:2003 Lifting appliances－Range of maximum capacities for basic models
  • KS A ISO 21550:2005 Photography－Electronic scanners for photographic images－Dynamic range measurements
  • KS A ISO 21550-2005(2020) Photography－Electronic scanners for photographic images－Dynamic range measurements
  • KS E ISO 12742:2012 Copper, lead and zinc sulfide concentrates－Determination of transportable moisture limits－Flow-table method
  • KS I ISO 16703:2005 Soil quality－Determination of content of hydrocarbon in the rangeC10 to C40 by gas chromatography
  • KS A IEC 61018-2012(2022) High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
  • KS I ISO 16703:2021 Soil quality — Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
  • KS I ISO 16703-2005(2015) Soil quality－Determination of content of hydrocarbon in the rangeC10 to C40 by gas chromatography
  • KS C IEC 61689:2005 Ultrasonics－Physiotherapy systems－Performance requirements and methods of measurement in the frequency range 0.5 MHz to 5 MHz
  • KS A IEC 61018-2012(2017) High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
  • KS C IEC 61472-2015(2020) Live working — Minimum approach distances for A.C. systems in the voltage range 72.5 kV to 800 kV — A method of calculation
  • KS B ISO 5596:2003 Hydraulic fluid power－Gas－loaded accumulators with separator－Ranges of pressures and volumes and characteristic quantities
  • KS C IEC 61472:2015 Live working — Minimum approach distances for A.C. systems in the voltage range 72.5 kV to 800 kV — A method of calculation

Danish Standards Foundation, Lao flow range

  • DS/EN 60534-2-4:2009 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
  • DS/EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
  • DS/EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
  • DS/EN 246:2004 Sanitary tapware - General specifications for flow rate regulators
  • DS/IEC 107-2:1982 Recommended methods of measurement on receivers for television broadcast transmission. Part 2: Electrical and acoustic measurements at audio-frequencies
  • DS/ETS 300174:1993 Network Aspects (NA); Digital coding of component television signals for contribution quality applications in the range 35-45 Mbit/s

European Committee for Electrotechnical Standardization（CENELEC）, Lao flow range

  • EN 60534-2-4:2009 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
  • EN 55024:2010 Information technology equipment - Immunity characteristics - Limits and methods of measurement
  • EN 55022:2010 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Incorporating corrigendum October 2011)
  • EN 61689:2007 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz (Remains Current)
  • EN 61689:2013 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
  • EN 61472:2013 Live working - Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV - A method of calculation

ES-UNE, Lao flow range

  • UNE-EN 60534-2-4:2009 Industrial-process control valves -- Part 2-4: Flow capacity - Inherent flow characteristics and rangeability (Endorsed by AENOR in October of 2009.)
  • UNE 20317:2005 ERRATUM:2005 Miniature circuit-breakers for power control, of 1,5 A to 63 A,
  • UNE-EN ISO 19157:2014/A1:2018 Geographic information - Data quality - Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018)
  • UNE-EN 61472:2014/AC:2015 Live working - Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV - A method of calculation
  • UNE-EN 303348 V1.2.1:2021 Audio frequency induction loop drivers up to 45 amperes in the frequency range 10 Hz to 9 kHz; Harmonised Standard for access to radio spectrum (Endorsed by Asociación Española de Normalización in September of 2021.)
  • UNE-EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • UNE-EN IEC 63009:2019 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 20 kHz to 500 kHz (Endorsed by Asociación Española de Normalización in November of 2019.)
  • UNE-EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004) (Endorsed by AENOR in February of 2012.)
  • UNE-EN IEC 61689:2022 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz (Endorsed by Asociación Española de Normalización in June of 2022.)
  • UNE-EN 61689:2013 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz (Endorsed by AENOR in June of 2013.)
  • UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems

International Organization for Standardization (ISO), Lao flow range

  • ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
  • ISO/DTR 15377 Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
  • ISO/TR 15377:2018 Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
  • ISO/TR 15377:2023 Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 series
  • ISO 2374:1983 Lifting appliances; Range of maximum capacities for basic models
  • ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
  • ISO 12742:2007 Copper, lead, and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method
  • ISO 12742:2000 Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow table method
  • ISO 12742:2020 Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method
  • ISO 21550:2004 Photography - Electronic scanners for photographic images - Dynamic range measurements
  • ISO 16703:2004 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
  • ISO 5596:1999 Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities
  • ISO/TR 15377:1998/Cor 1:1999 Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1; Technical Corrigendum 1

PL-PKN, Lao flow range

  • PN M53904-1972 National Measurements System Manometrie flow-meters Indicating and recording ranges
  • PN C04591 ArkusZ00-1974 Water and was?e wa?er Tests for pofajsium Introduction and rang? of s?andard
  • PN C04638-01-1988 Water and waste water ?on balance of water Introduction and rang? of standard
  • PN M71052-1966 Industrial centrifugesRanges of sizes of batch filter cen?rifuges
  • PN Z04061 Arkusz 01-1971 Air purity protection Study of acetic acid and acetic anhydride content Rang? of standard
  • PN C81549-01-1986 Paints and varnishes Determination of toxic metals content General, scope of the standard

CZ-CSN, Lao flow range

  • CSN 99 6801 ZZ1-2000
  • CSN 99 6801-1989 Hierarchy scheme of gas flowmeters and gas volume-meters for rate of flow ranging from 0,001 to 10000 m3h-1
  • CSN 25 1442-1974 Micrometer depth for measuring ranges 0 to 100 mm
  • CSN 25 1435-1974 Solid micrometer calliper gauges for measuring ranges 100 to 1000 mm
  • CSN 99 4703-1989 Hierarchy scheme of mean absolute pressure gauges with measuring range from 1 to 400 kPa
  • CSN 35 6205-1961 Nominal measuring ranges of electric switchboard and panel amperemeters and voltmeters
  • CSN 25 1438-1974 Folding micrometer callipers gauges with length bars for measuring ranges 100 to 1300 mm
  • CSN 42 9030-1986 Steel drop forgings. Machining allowances and limit variations of dimensions and forms
  • CSN ETS 300 174-1994 Network Aspects (NA). Digital coding of component television signals for contribution quality applications in the range 34 - 45 Mbit/s

British Standards Institution (BSI), Lao flow range

  • BS IEC 61786-2:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Basic standard for measurements
  • PD ISO/TR 15377:2023 Measurement of fluid flow by means of pressure-differential devices. Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 series
  • BS IEC 61501:2001 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
  • PD ISO/TR 15377:2018 Tracked Changes. Measurement of fluid flow by means of pressure-differential devices. Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
  • BS PD ISO/TR 15377:2018 Tracked Changes. Measurement of fluid flow by means of pressure-differential devices. Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
  • BS PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
  • PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
  • BS ISO 5596:1999 Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities
  • BS EN 13798:2002 Hydrometry - Specification for a reference raingauge pit
  • BS EN 61966-2-4:2006 Multimedia systems and equipment - Colour measurement and management - Colour management - Extended-gamut YCC colour space for video applications - xvYCC
  • BS 7834:1995 Specification for turbine meters used for the measurement of gas flow in closed conduits
  • BS 6910-1:1988 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials
  • BS ISO 12742:2007 Copper, lead, and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method
  • BS ISO 12742:2020 Copper, lead and zinc sulfide concentrates. Determination of transportable moisture limits. Flow-table method
  • BS ISO 21550:2004 Photography - Electronic scanners for photographic images - Dynamic range measurements
  • BS EN 61566:1998 Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz
  • BS MA 27:1974 Specification for sight-flow indicators for tank overflow systems
  • BS EN 50181:2010 Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers
  • BS ISO 20765-2:2015 Natural gas. Calculation of thermodynamic properties. Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
  • BS 3680-7:2000 Measurement of liquid flow in open channels - Specification of equipment for the measurement of water level
  • BS EN 61008-2-1:1995 Specification for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Applicability of the general rules to RCCBs functionally independent of line voltage
  • BS EN 55022:2010 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
  • BS EN 55022:2011 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
  • BS EN 50341-2-4:2016 Overhead electrical lines exceeding AC 1 kV. National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012)
  • BS IEC 61501:1998 Nuclear reactor instrumentation. Wide range neutron fluence rate meter. Mean square voltage method
  • BS EN 61009-2-1:1995 Specification for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Applicability of the general rules to RCBOs functionally independent of line voltage
  • BS EN ISO 16703:2011 Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
  • BS EN 13284-1:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
  • BS EN 61102:1994 Specification for measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHz to 15 MHz
  • BS IEC 63175:2021 Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV
  • BS ISO 5596:2000 Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities
  • PD IEC TS 62341-6-5:2019 Organic light emitting diode (OLED) displays. Measuring methods of dynamic range properties
  • BS ISO 13778:1999 Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
  • BS EN 61689:2007 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
  • BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
  • BS EN 61472:2013 Live working. Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV. A method of calculation
  • BS EN 61472:2005 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
  • BS EN 61472:2004 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
  • BS 3680-11B:1992 Measurement of liquid flow in open channels - Free surface flow in closed conduits - Specification for performance and installation of equipment for measurement of free surface flow in closed conduits
  • BS 6910-2:1989 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation

ZA-SANS, Lao flow range

  • SANS 61000-3-2:2006 Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
  • SANS 211:2009 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Lao flow range

  • GB/T 34127-2017 Fixed energy high intensity proton cyclotron within the range of 10 MeV～20 MeV

Lithuanian Standards Office , Lao flow range

  • LST EN 60534-2-4-2009 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability (IEC 60534-2-4:2009)
  • LST EN 13284-1-2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
  • LST EN 246-2003 Sanitary tapware - General specifications for flow rate regulators
  • LST EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Lao flow range

  • GB/Z 35140-2017 Measurement of fluid flow by means of pressure-differential devices—Guidelines for the specification of orifice plates,nozzles and Venturi tubes beyond the scope of GB/T 2624
  • GB 50179-1993 Code for liquid flow measurment in open channels
  • GB 50179-2015 River Flow Test Specifications
  • GB/T 4830-2015 Industrial process measurement and control instruments.Pressure range and quality of air supply
  • GB/T 4830-1984 Pressure range and quality of air supply for the industrial process measurement and control instruments
  • GB/T 30103.3-2013 Methods of testing for thermal performance on cold store.Part 3:Heat flux testing for envelop enclosure
  • GB/T 7966-1987 Acoustics--Ultrasonic power measurement in the frequency range 0.5~10MHz
  • GB/T 28580-2012 Quality requirements for port logistics service
  • GB/T 28580-2023 Port Logistics Service Quality Standards
  • GB/T 41570-2022 Technical specification for energy efficiency measurement in process production
  • GB 50729-2012 Code for acceptance of construction quality of ±800kV & under HVDC converter substation
  • GB/T 2352-1997 Hydraulic fluid power--Gas-loaded accumulators with separators--Range of pressures and volumes, characteristic quantities and identification
  • GB/T 2352-2003 Hydraulic fluid power--Gas-loaded accumulators with separator--Ranges of pressures and volumes and characteristic quantities

US-CFR-file, Lao flow range

  • CFR 12-249.40-2014 Banks and banking. Part249:Liquidity risk measurement standards (regulation WW). SubpartE:Liquidity coverage shortfall. Section249.40:Liquidity coverage shortfall: Supervisory framework.
  • CFR 48-246.870-1-2014 Federal Acquisition Regulations System. Part246:Quality assurance. Section246.870-1:Scope.

Professional Standard - Machinery, Lao flow range

  • JB/T 9266-1999 Temperature measuring range of indicating instruments and recording instruments
  • JB/T 10007-1999 Large external micrometer
  • JB/T 10007-2012 Large outside micrometer (the measuring range is from 1 000mm to 3 000mm)
  • JB/T 8370-1996 Vernier calipers Vernier calipers (measuring range 0-1500mm，0-2000mm）
  • JB/T 9233.19-1999 General methods of testing the performance of industrial process measurement and control instruments.Zero and span adjuctable range

FI-SFS, Lao flow range

(U.S.) Ford Automotive Standards, Lao flow range

AT-ON, Lao flow range

Society of Automotive Engineers (SAE), Lao flow range

International Telecommunication Union (ITU), Lao flow range

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Lao flow range

International Electrotechnical Commission (IEC), Lao flow range

  • IEC TR 62935:2016 Measurement methods - High dynamic range video
  • IEC 60534-2-4:2009 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
  • IEC 60534-2-4:1989 Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristics and rangeability
  • IEC 61161:1998 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz
  • IEC 61161:1992 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz
  • IEC 61102:1991 Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz
  • IEC 63175:2021 Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV
  • IEC 61161/AMD1:1998 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz; Amendment 1
  • IEC 61501:1998 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
  • IEC 61689:2007 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
  • IEC 61102:1991/AMD1:1993 Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz; amendment 1
  • IEC 61689:2022 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
  • IEC 61689:2022 RLV Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
  • IEC 60107-2:1980 Recommended methods of measurement on receivers for television broadcast transmission. Part 2 : Electrical and acoustic measurements at audio-frequencies
  • IEC 61472:2004 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
  • IEC 61472:2013 Live working - Minimum approach distances for ac systems in the voltage range 72,5 kV to 800 kV - A method of calculation

DE-VDA, Lao flow range

  • VDA 4955-2006
  • VDA 280-6C-2006 Colorimetry for motor vehicles - Colour measurement on vehicle glass in the visible spectral range - Colour measurement on mirrors in reflection

Professional Standard - Aviation, Lao flow range

  • HB 3422-1983 Adjustable bow type measuring instrument (range of measurement: 50~300)
  • HB 3421-1983 Adjustable tubular type measuring instrument (range of measurement: 340~1000)
  • HB 3423-1983 Adjustable bow type measuring instrument (range of measurement: 300~500)
  • HB 3420-1983 Adjustable flat plate type measurement instrument (range of measurement: 200~1000)
  • HB 3419-1983 Adjustable flat plate type measurement instrument (range of measurement: 75~200)
  • HB 6136.13-1987 Flight Test Instrument (Static) Calibration Specification Flow

National Metrological Technical Specifications of the People's Republic of China, Lao flow range

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Lao flow range

  • ASHRAE 3933-1996 Effects of Surrounding Spaces on Rooms Pressurized by Differential Flow Control
  • ASHRAE HI-02-19-3-2002 CFD Analysis on Rising Stream Around a Human Body and Its Effect on Inhalation Air Quality

American Society for Testing and Materials (ASTM), Lao flow range

  • ASTM E2938-15 Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
  • ASTM D8521-23 Standard Tables of Body Measurements for Little Kids Type, Regular Size Range 2-6
  • ASTM D8077/D8077M-16 Standard Tables for Body Measurements for Mature Big Men Type, Size Range 46–64
  • ASTM D8077/D8077M-16(2022) Standard Tables for Body Measurements for Mature Big Men Type, Size Range 46–64
  • ASTM D6960/D6960M-16 Standard Tables for Body Measurements for Plus Women's Figure Type, Size Range 14W–20W
  • ASTM D6960/D6960M-16e1 Standard Tables for Body Measurements for Plus Women's Figure Type, Size Range 14W – 40W
  • ASTM D7213-11 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615176;C by Gas Chromatography
  • ASTM D6829-02(2015) Standard Tables of Body Measurements for Juniors, Sizes 0 to 19
  • ASTM D5585-21 Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00–20
  • ASTM D5585-11 Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00x2013;20
  • ASTM D6960/D6960M-16(2023) Standard Tables for Body Measurements for Plus Women's Figure Type, Size Range 14W – 40W
  • ASTM D7878/D7878M-13 Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P ndash; 20P
  • ASTM D7878/D7878M-13e1 Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P ndash; 20P
  • ASTM D5585-11e1 Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00ndash;20
  • ASTM D6860/D6860M-13 Standard Tables of Body Measurements for Boys, Sizes 4H to 20H Husky
  • ASTM D8523-23 Standard Tables of Body Measurements for Big Boys Regular Figure Type, Size Range 7 – 20
  • ASTM D8522-23 Standard Tables of Body Measurements for Big Girls Regular Figure Type, Size Range 7 – 20
  • ASTM E1921-12 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
  • ASTM E1921-13 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
  • ASTM C230/C230M-03 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
  • ASTM C230/C230M-98e2 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
  • ASTM C230/C230M-98E1 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
  • ASTM C230/C230M-20 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
  • ASTM F2138-12(2017) Standard Specification for Excess Flow Valves for Natural Gas Service
  • ASTM C230/C230M-21 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

Japanese Industrial Standards Committee (JISC), Lao flow range

  • JIS D 1301:2001 Electric vehicle -- Measurement for driving range and energy consumption
  • JIS B 8397:2002 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities
  • JIS B 2005-2-4:2019 Industrial-process control valves -- Part 2-4: Flow capacity -- Inherent flow characteristics and rangeability

IN-BIS, Lao flow range

Chongqing Provincial Standard of the People's Republic of China, Lao flow range

  • DB50/T 505-2013 Technical specification for measuring sewage flow by open channel weir and flume flowmeter

HU-MSZT, Lao flow range

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Lao flow range

  • ARI 575-1994 Method of Measuring Machinery Sound Within an Equipment Space

KR-KS, Lao flow range

BE-NBN, Lao flow range

Indonesia Standards, Lao flow range

  • SNI 04-3582-1994 High voltage alternating current circuit breaker. Part 1: Scope, condition and definition

Professional Standard - Aquaculture, Lao flow range

  • SC/T 9008.3-1997 Methods of testing for main heat engineering perfomance on cold storage.Heat flux testing for envelope construction

AENOR, Lao flow range

  • UNE 58109:1986 LIFTING APPLIANCES. RANGE OF MAXIMUN CAPACITIES FOR BASIC MODELS
  • UNE 16300:1975 DEFINITION, DESIGNATION AND MEASURES AND PROFILES RANGE OF AGLOMERATED ABRASIVE PRODUCTS.
  • UNE-EN 246:2004 Sanitary tapware. General specifications for flow rate regulators.

Defense Logistics Agency, Lao flow range

Institute of Electrical and Electronics Engineers (IEEE), Lao flow range

  • IEEE Std 1302-1998 IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range DC to 18GHz
  • IEEE Std 1302-2008 IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz
  • IEEE 1302-2019 IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • IEEE Std 1302-2019 IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • IEEE P1302/D4, July 2019 IEEE Draft Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • IEEE P1302/D2, April 2019 IEEE Draft Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • IEEE P1302/D3, June 2019 IEEE Draft Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • IEEE Unapproved Draft Std P1302_D7.02, Dec 2007.pd IEEE Draft Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range DC to 18 Ghz

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Lao flow range

  • IEEE 1302-1998 Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz
  • IEEE 1302-2008 Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz
  • IEEE P1302/D2-2019 Draft Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • IEEE P1302/D3-2019 Draft Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 40 GHz
  • IEEE C63.2-2016 Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz
  • IEEE 187-2018 Measurement of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz
  • IEEE 1560-2005 Methods of Measurement of Radio-Frequency Power-Line Interference Filter in the Range of 100 Hz to 10 GHz

Guangxi Provincial Standard of the People's Republic of China, Lao flow range

  • DB45/T 2428-2021 Code for calculation of water flow in sections of rivers without measured flow data

European Committee for Standardization (CEN), Lao flow range

  • EN 13798:2010 Hydrometry - Specification for a reference raingauge pit
  • EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements
  • EN 13284-1:2001 Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method
  • EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
  • EN 14039:2004 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography

Professional Standard - Public Safety Standards, Lao flow range

  • GA/T 2000.23-2014 Public Security Information Code Part 23: Population Migration (Mobility) Regional Scope Code

NL-NEN, Lao flow range

  • NEN 1765-1984 Paper and board - Determmation of bursting strength (measuring range 70-1100 kPa)
  • NEN 11161-1993 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz (IEC 1161:1992)
  • NEN 11102-1994 Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 1102:1991)
  • NEN 11102/A1-1994 Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 1102:1991/A1:1993)

CH-SNV, Lao flow range

CENELEC - European Committee for Electrotechnical Standardization, Lao flow range

  • EN 55024:1998 Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement
  • CLC/TR 50579-2012 Electricity metering equipment (a.c.) - Severity levels@ immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz
  • EN 55022:1998 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Incorporates Amendments A1: 2000 and A2: 2003)
  • EN 55022:1994 Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment (CISPR 22 : 1993)
  • EN 55022:1988 Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
  • EN 55022:2006 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Incorporates Amendment A1: 2007)
  • EN 61689:1996 Ultrasonics - Physiotherapy Systems Performance Requirements and Methods of Measurement in the Frequency Range 0@5 MHz to 5 MHz

IETF - Internet Engineering Task Force, Lao flow range

  • RFC 5575-2009 Dissemination of Flow Specification Rules
  • RFC 5101-2008 Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of IP Traffic Flow Information

European Association of Aerospace Industries, Lao flow range

  • AECMA PREN 3774-001-1994 Aerospace Series Circuit Breakers, Three-Pole, Temperature Compensated, Rated Currents 2 A to 25 A, Switching Capacity 65 IN Part 001 : Technical Specification Edition P 1
  • AECMA PREN 3773-001-1994 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Currents 1 A to 25 A, Switching Capacity 65 IN/1 000 A Max. Part 001 : Technical Specification Edition P 1

Military Standard of the People's Republic of China-General Armament Department, Lao flow range

  • GJB 7397-2011 General specification for gas massflow sensors
  • GJB 734B-2021 General specifications for small current capacity rotary switches
  • GJB 4198-2001 General specification for aircraft fuel flow sensors
  • GJB 5031-2001 General specification for aircraft fuel flow sensors
  • GJB 3370-1998 General specification for aircraft electro-hydraulic flow servo valves

U.S. Military Regulations and Norms, Lao flow range

Military Standards (MIL-STD), Lao flow range

(U.S.) Telecommunications Industries Association , Lao flow range

  • TIA-470.310-C-2004 Telecommunications ?Telephone Terminal Equipment ?Cordless Telephone Range Measurement Procedures

TIA - Telecommunications Industry Association, Lao flow range

  • TIA-470.310-D-2010 Telecommunications Telephone Terminal Equipment Cordless Telephone Range Measurement Procedures

Group Standards of the People's Republic of China, Lao flow range

  • T/BSQY 001-2021 Quality standard of bonded logistics service
  • T/SHMHZQ 150-2021 Trade logistics service quality standard
  • T/SZAS 44-2022 Quality assessment specifications for logistics data
  • T/FSAS 59-2022 Logistics data quality evaluation specification
  • T/UWA 015-2022 High Dynamic Range Video Image Quality Part 1: Subjective Evaluation
  • T/CHES 61-2021 Acoustic Doppler Flow Test Specification
  • T/QYZL 35-2022 Standard for evaluation of drifting tourism service quality
  • T/CIMA 0027-2021 Specification for inspection of AC sampling and measuring devices
  • T/SJZJLXH 0001-2018 Calibration specification for on-site flow detection system
  • T/SJZJLXH 0009-2020 Calibration specification for on-site flow detection system
  • T/GDLIA 3-2019 Specification of logistics quality control in direct selling industry
  • T/CEC 5057.1-2021 Application scope and depth regulations of 3D design for power transmission and transformation projects Part 1: Substation (converter station)
  • T/SHMHZQ 060-2022 Wax industry product quality inspection process specification
  • T/CMA HG102-2023 Calibration Method for Temperature and Humidity Sensor (measuring range -10℃～100℃ and 0% RH～100% RH) for Mining
  • T/SDIRAA 023-2021 Marine data quality control processing procedure specification
  • T/SMA 0036-2023 Technical Specification for 10kV～35kV Metering Current Transformers

Professional Standard - Meteorology, Lao flow range

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Lao flow range

  • GJB 5998-2007 Specincation for electromagnetic flowmeters of ships

Henan Provincial Standard of the People's Republic of China, Lao flow range

Hebei Provincial Standard of the People's Republic of China, Lao flow range

Tianjin Provincial Standard of the People's Republic of China, Lao flow range

Jilin Provincial Standard of the People's Republic of China, Lao flow range

Xinjiang Provincial Standard of the People's Republic of China, Lao flow range

未注明发布机构, Lao flow range

  • BS ISO/TR 15377:1998(1999) Measurement of fluid flow by means of pressure differential devices — Guidelines for specification of nozzles and orifice plates beyond

CN-QIYE, Lao flow range

  • Q/GDW 533-2010 Specifications for maintenance of high-voltage direct current transmission direct current measuring devices
  • Q/GDW 629-2011 Technical specifications for non-electrical protection of DC main equipment in converter stations
  • Q/GDW 1899-2013 Calibration specification for AC sampling and measuring devices
  • Q/GDW 1572-2014 Technical specifications for low-voltage current transformers for metering

U.S. Air Force, Lao flow range

SG-SPRING SG, Lao flow range

  • SS 318-1987 SPECIFICATION FOR Current Transformers For Measurement And Protection

Professional Standard - Water Conservancy, Lao flow range

  • SL 337-2006 Code for discharge measurement of acoustic Doppler current

SAE - SAE International, Lao flow range

Professional Standard - Electricity, Lao flow range

  • DL/T 2268-2021 Calibration specification for DC electric field measuring instrument
  • DL/T 2201-2020 Technical specifications for flow measurement devices in thermal power plants

Professional Standard - Aerospace, Lao flow range

  • QJ 504A-1996 General specification for flow electrohydraulic servo valve
  • QJ 1506-1988 Specification for flow measuring and calibrating devices by dynamic weighing
  • QJ 1153-1987 Specification for steady-state flow measurement of liquid rocket motors
  • QJ 2160-1991 Specification for dynamic volumetric liquid flow measurement and calibration devices
  • QJ 3235-2005 Specification for flow regulators for liquid oxygen kerosene engines

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Lao flow range

  • ITU-T O.1-1989 Scope and Application of Series O Recommendations - Specifications for Measuring Equipment (Study Group IV) 4 pp
  • ITU-T O.1-1996 Scope and Application of Measurement Equipment Specifications Covered in the O-Series Recommendations - Series O: Specifications for Measuring Equipment; General (Study Group 4; 30 pp)

Electronic Components, Assemblies and Materials Association, Lao flow range

  • ECA 535BAAA-1987 Fixed Tantalum Chip Capacitor Style 1 Protected-Standard Capacitance Range
  • ECA 535BAAB-1987 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range

RO-ASRO, Lao flow range

Shanxi Provincial Standard of the People's Republic of China, Lao flow range

Inner Mongolia Provincial Standard of the People's Republic of China, Lao flow range

  • DB15/T 1173-2017 Pharmaceutical logistics express service quality specification
  • DB15/T 920-2015 Pharmaceutical logistics drug quality information management norms

全国标准信息公共服务平台, Lao flow range

  • GB/T 42502-2023 Pharmaceutical logistics quality management audit specification

国家能源局, Lao flow range

  • NB/T 35091-2016 Specification for calculation of ecological flow in hydropower projects

YU-JUS, Lao flow range

  • JUS K.T3.052-1978 Gaugesfor shafts. Gap gauges, range above 3 to and including 100 mm
  • JUS N.N0.944-1988 Radiofrequency interference. Broadcast receivers and associated equipment. Immunity. Methods of measurement. Coupling units and low-pass filter for the measurement of immunity to conducted currents in the frequency range from 0,15 tu 150 MHz
  • JUS N.N0.908-1988 Radio-frequency intorferences. Speclflcations for measuring apparatns and measu- ring metbods in the frequency range from 10 kSz to 1 000 Mffz

Standard Association of Australia （SAA）, Lao flow range

  • AS/NZS 4714:2000 Ultrasound power measurement in liquids in the frquency range 0.5 MHz to 25 MHz

ESDU - Engineering Sciences Data Unit, Lao flow range

  • ESDU 80017-1980 Thermophysical properties of heat pipe working fluids: operating range between -60 degrees C and 300 degrees C.
  • PERF RT 1/3-1948 "Performance reduction for aircraft with turbo-props. ""Non-dimensional"" graphical method. Range and endurance."

Professional Standard - Medicine, Lao flow range

  • YY/T 0750-2009 Ultrasonics.Physiotherapy systems.Field specifications and methods of measurement in the frequency range 0.5MHz to 5MHz

国家食品药品监督管理局, Lao flow range

  • YY/T 0750-2018 Sound field requirements and measurement methods for ultrasonic physiotherapy equipment in the frequency range of 0.5MHZ ~ 5MHZ

Professional Standard - Electron, Lao flow range

  • SJ 20834-2002 Relays,air and liquid flow,general specification for
  • SJ/T 10690-1996 General specification for digital directcurrent micro resistance measuring instruments

Shaanxi Provincial Standard of the People's Republic of China, Lao flow range

  • DB61/T 1095-2017 Specifications for Quality and Safety Inspection of Water Rafting Boats

Hubei Provincial Standard of the People's Republic of China, Lao flow range

  • DB4205/T 89-2021 Calculation specification of flood peak discharge by empirical formula method of storm flood in small watershed

US-CLSI, Lao flow range

  • CLSI VET02-2021 Development of Quality Control Ranges, Breakpoints, and Interpretive Categories for Antimicrobial Agents Used in Veterinary Medicine

Acoustical Society of America (ASA), Lao flow range

  • ASA S12.9 PART 2-1992 Quantities and Procedures for Description and Measurement of Environmental Sound Part 2: Measurement of Long-Term, Wide-Area Sound

Anhui Provincial Standard of the People's Republic of China, Lao flow range

  • DB34/T 4233-2022 Creation Specifications for Integrity Measurement Demonstration Units of Logistics Express Enterprises

能源部, Lao flow range

  • SY/T 5567-1993 Maintenance specifications for small diameter flow water content tester

工业和信息化部, Lao flow range

  • YD/T 3439-2019 Internet traffic classification methods and coding specifications

  Lao Flow Calibration, Lao Flow Calibration, Lao Flow Calibration Device, Lao flow range, Lao measuring range, Lao flue gas flow, Lao flow calibrator, Scope of analysis, Lao temperature range, Lao flowmeter, Lao Humidity Range, Lao calibration range, flow range, Lao gas flow, Scope of application, The flowmeter can measure out of range, Lao soap film flowmeter, Measuring range of flowmeter, Flowmeter scale range, Lao flow method.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved