ZH
RU
ES

How to measure the conductivity of a material

How to measure the conductivity of a material, Total:499 items.

In the international standard classification, How to measure the conductivity of a material involves: Electromagnetic compatibility (EMC), Linear and angular measurements, Surface treatment and coating, Materials for aerospace construction, Non-ferrous metals, Printed circuits and boards, Thermodynamics and temperature measurements, Mechanical testing, Inks. Printing inks, Semiconducting materials, Ceramics, Insulating materials, Construction materials, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Metrology and measurement in general, Electrical wires and cables, Magnetic materials, Semiconductor devices, Electrical and electronic testing, Protection against fire, Electrical engineering in general, Soil quality. Pedology, Tyres, Non-destructive testing, Analytical chemistry, Piezoelectric and dielectric devices, Iron and steel products, Welding, brazing and soldering, Protective equipment, Products of the textile industry, Electromechanical components for electronic and telecommunications equipment, Mechanical structures for electronic equipment, Insulating fluids, Powder metallurgy, Components for electrical equipment, Inorganic chemicals, Refractories, Reinforced plastics, Protection of and in buildings, Transport, Laundry appliances, Products of the chemical industry, Materials for the reinforcement of composites, Equipment for petroleum and natural gas industries, Lubricants, industrial oils and related products, Geology. Meteorology. Hydrology, Mining equipment, Environmental testing, Components and accessories for telecommunications equipment, Fibre optic communications, Physics. Chemistry, Road vehicle systems, Galvanic cells and batteries, Medical equipment, Plastics.


SE-SIS, How to measure the conductivity of a material

  • SIS SS 16 22 27-1986 Rubber and thermoplastic elastomer - Conducting and antistatic materials - Measurement of resistivity

国家市场监督管理总局、中国国家标准化管理委员会, How to measure the conductivity of a material

  • GB/T 35033-2018 Measurement method on conductive properties of electromagnetic shielding material and bonding impedance of metal material for 30MHz to 1GHz
  • GB/T 17650.2-2021 Test on gases evolved during combustion of materials from cables or optical fiber cables—Part 2: Determination of acidity (by pH measurement) and conductivity

Association Francaise de Normalisation, How to measure the conductivity of a material

  • NF EN 61788-10:2006 Supraconductivité - Partie 10 : mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance
  • NF A91-113:2004 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method.
  • NF EN IEC 61788-4:2020 Supraconductivité - Partie 4 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des composites supraconducteurs de Nb-Ti et de Nb3Sn
  • NF EN 61788-13:2013 Supraconductivité - Partie 13 : mesure des pertes en courant alternatif - Méthodes de mesure par magnétomètre des pertes par hystérésis dans les composites multi-filamentaires supraconducteurs
  • NF C26-305:1993 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 5 : guidelines for the application of thermal endurance characteristics.
  • NF EN IEC 61788-26:2020 Supraconductivité - Partie 26 : mesurage du courant critique - Courant critique continu des composites supraconducteurs de RE-Ba-Cu-O
  • NF C31-888-13:2003 Superconductivity - Part 13 : AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites.
  • NF EN ISO 2360:2017 Revêtements non conducteurs sur matériaux de base non magnétiques conducteurs de l'électricité - Mesurage de l'épaisseur de revêtement - Méthode par courants de Foucault sensible aux variations d'amplitude
  • NF C32-074:1993 TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.
  • NF EN 10252:1997 Matériaux magnétiques - Méthodes de mesure des propriétés magnétiques à fréquences moyennes des tôles et feuillards magnétiques en acier
  • NF EN 60404-4:1998 Matériaux magnétiques - Partie 4 : méthodes de mesure en courant continu des propriétés magnétiques du fer et de l'acier.
  • NF EN 1149-2:1997 Vêtements de protection - Propriétés électrostatiques - Partie 2 : méthode d'essai pour le mesurage de la résistance électrique à travers un matériau (résistance verticale).
  • NF C28-913/IN1:2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester.
  • XP B44-014*XP CEN/TS 16599:2014 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
  • NF EN 60754-2/A1:2020 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
  • NF EN 60754-2:2014 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2 : détermination de la conductivité et de l'acidité (par mesure du pH)
  • NF EN IEC 63203-201-2:2022 Technologies et dispositifs électroniques prêts-à-porter - Partie 201-2 : Textile électronique - Méthodes de mesure des propriétés fondamentales des étoffes conductrices et des matériaux isolants
  • NF C32-074-2*NF EN 60754-2:2014 Test on gases evolved during combustion of materials from cables - Part 2 : determination of acidity (by pH measurement) and conductivity
  • NF C32-074-2/A1*NF EN 60754-2/A1:2020 Test on gases evolved during combustion of materials from cables - Part 2 : determination of acidity (by pH measurement) and conductivity
  • NF B40-335-1*NF EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1 : hot-wire methods (cross-array and resistance thermometer)
  • NF EN IEC 60404-11:2021 Matériaux magnétiques - Partie 11 : méthodes de mesurage de la résistance d'isolement superficiel des bandes et tôles en acier électrique
  • NF EN 62047-14:2012 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 14 : méthode de mesure des limites de formage des matériaux à couche métallique
  • NF C96-022-39*NF EN 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Part 39 : measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • NF C26-501-3*NF EN 50324-3:2002 Piezoelectric properties of ceramic materials and components - Part 3 : properties and methods of measurement - High power.
  • NF EN IEC 61788-24:2018 Supraconductivité - Partie 24 : mesurage du courant critique - Courant critique retenu après double flexion à température ambiante des fils supraconducteurs Bi-2223 avec gaine Ag
  • NF C26-501-2*NF EN 50324-2:2002 Piezoelectric properties of ceramic materials and components - Part 2 : methods of measurement - Low power
  • NF EN 50324-3:2002 Propriétés piézoélectriques des matériaux et composants céramiques - Partie 3 : méthodes de mesure - Grande puissance
  • NF EN 50324-2:2002 Propriétés piézoélectriques des matériaux et composants en céramique - Partie 2 : méthodes de mesure - Faible puissance
  • NF C28-901-11:2021 Magnetic materials - Part 11 : methods of measurement of the surface insulation resistance of electrical steel strip and sheet
  • NF C96-050-14*NF EN 62047-14:2012 Semiconductor devices - Micro-electromechanical devices - Part 14 : forming limit measuring method of metallic film materials
  • NF C32-074-22:2000 Common test methods for cables under fire conditions - Test on gas evolved during combustion of materials from cables - Part 2-2 : procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity.
  • NF EN IEC 60749-39:2022 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 39 : mesure de la diffusivité d'humidité et de l'hydrosolubilité dans les matériaux organiques utilisés dans les composants à semiconducteurs
  • NF EN IEC 61189-2-501:2022 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 2-501 : méthodes d'essai des matériaux pour structures d'interconnexion - Mesure de la puissance élastique et d...
  • NF M87-272-5*NF EN ISO 13503-5:2010 Petroleum and natural gas industries - Completion fluids and materials - Part 5 : procedure for measuring the long-term conductivity of proppants.
  • NF EN ISO 13503-5:2010 Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 5 : mode opératoire pour mesurer la conductivité à long terme des agents de soutènement
  • NF EN IEC 60404-13:2018 Matériaux magnétiques - Partie 13 : méthodes de mesure de la résistivité, de la masse volumique et du facteur de foisonnement des bandes et tôles en acier électrique
  • NF C96-022-39*NF EN IEC 60749-39:2022 Semiconductor devices - Mechanical and climatic test methods - Part 39 : measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • NF C28-931/A1*NF EN 60404-2/A1:2008 Magnetic materials - Part 2 : methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • NF C28-931*NF EN 60404-2:1998 Magnetic materials. Part 2 : methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame.
  • NF C28-901-13:2008 Magnetic materials - Part 13 : methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip.
  • NF C28-901-13*NF EN IEC 60404-13:2018 Magnetic materials - Part 13 : methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
  • NF EN 62047-11:2014 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 11 : méthode d'essai pour les coefficients de dilatation thermique linéaire des matériaux autonomes pour systèmes microélectromécaniques
  • NF EN 62047-8:2011 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 8 : méthode d'essai de la flexion de bandes en vue de la mesure des propriétés de traction des couches minces
  • NF C46-022:1986 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. RADIATED ELECTROMAGNETIC FIELD REQUIREMENTS.
  • NF T73-290*NF EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two phase titration method
  • NF EN 60811-604:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 604 : essais physiques - Mesure de l'absence de composants corrosifs dans les matières de remplissage
  • NF EN 61023:2017 Matériels et systèmes de navigation et de radiocommunication maritimes - Équipements de mesurage de la vitesse et de la distance (SDME) - Exigences de performance, méthodes de test et résultats exigibles
  • NF EN 60811-410/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 410 : essais divers - Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux ...
  • NF EN 60811-410:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 410 : essais divers - Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux ...
  • NF C28-901-17*NF EN IEC 60404-17:2021 Magnetic materials - Part 17 : methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor

British Standards Institution (BSI), How to measure the conductivity of a material

  • BS IEC 62899-202-4:2021 Printed electronics - Materials. Conductive ink. Measurement methods for properties of stretchable printed layers (conductive and insulating)
  • BS IEC 62899-202-10:2023 Printed electronics - Materials. Resistance measurement method for thermoformable conducting layer
  • BS IEC 62899-202-3:2019 Printed electronics - Materials. Conductive ink. Measurement of sheet resistance of conductive films. Contactless method
  • 18/30369151 DC BS EN 62899-202-7. Printed electronics. Part 202-7. Materials. Conductive ink. Measurement of peel strength for printed conductive layer on flexible substrate
  • BS IEC 62899-202-6:2020 Printed electronics. Materials. Conductive ink. Measurement method for resistance changes under high temperature and humidity. Printed conductive layer on a flexible substrate
  • BS IEC 62899-201-2:2021 Printed electronics - Materials. Substrates. Measurement methods for properties of stretchable substrates
  • 21/30434810 DC BS EN IEC 62899-202-8. Printed electronics - Part 202-8. Materials. Conductive film. Measurement for difference in resistance with printing direction of conductive film fabricated with wire shaped materials
  • BS EN IEC 60404-3:2022 Magnetic materials - Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • BS EN 60754-2:2014+A1:2020 Test on gases evolved during combustion of materials from cables - Determination of acidity (by pH measurement) and conductivity
  • BS EN IEC 63203-201-2:2022 Wearable electronic devices and technologies - Electronic textile. Measurement methods for basic properties of conductive fabrics and insulation materials
  • BS EN 10280:2001+A1:2007 Magnetic materials — Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
  • BS EN 60754-2:2014 Test on gases evolved during combustion of materials from cables. Determination of acidity (by pH measurement) and conductivity
  • BS EN 60404-2:1998+A1:2008 Magnetic materials — Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • BS EN 60404-2+A1:1996 Magnetic materials. Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • BS PD IEC TR 63304:2021 Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet
  • PD IEC TR 63304:2021 Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet
  • BS EN 50324-2:2002 Piezoelectric properties of ceramic materials and components - Methods of measurement - Low power
  • BS EN 50324-3:2002 Piezoelectric properties of ceramic materials and components - Methods of measurement - High power
  • 23/30468955 DC BS EN IEC 60404-18. Magnetic materials - Part 18. Permanent magnet (magnetically hard) materials. Methods of measurement of the magnetic properties in an open magnetic circuit using a superconducting magnet
  • BS EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of
  • BS ISO 18937-1:2023 Imaging materials. Methods for measuring indoor light stability of photographic prints. General guidance and requirements
  • BS EN 1149-2:1997 Protective clothing - Electrostatic properties - Test method for measurement of the electrical resistance through a material (vertical resistance)
  • BS EN 62047-14:2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials
  • BS EN 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • BS PD CEN/TS 16599:2014 Photocatalysis. Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
  • 21/30437997 DC BS EN IEC 62899-202-10. Printed Electronics - Part 202-10. Materials. Resistance measurement method for thermoformable conducting layers
  • BS EN 62044-2:2005 Cores made of soft magnetic materials - Measuring methods - Magnetic properties at low excitation level
  • BS EN 60404-13:2007 Magnetic materials - Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • 18/30366168 DC BS EN 62899-202-6. Printed electronics. Part 202-6. Materials. Conductive film. Environmental test of a printed metal based conductive layer on flexible substrate
  • 20/30387893 DC BS EN IEC 63203-201-2. Wearable electronic devices and technologies. Part 201-2. Electronic Textile. Measurement methods for basic properties of conductive fabric and insulation materials
  • BS EN IEC 60404-11:2021 Tracked Changes. Magnetic materials. Methods of measurement of the surface insulation resistance of electrical steel strip and sheet
  • BS EN IEC 60749-39:2022 Tracked Changes. Semiconductor devices. Mechanical and climatic test methods. Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • BS EN IEC 60404-17:2021 Magnetic materials - Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
  • 18/30377712 DC BS EN 60754-2 AMD1. Test on gases evolved during combustion of materials from cables. Part 2. Determination of acidity (by pH measurement) and conductivity
  • BS EN IEC 60404-13:2018 Tracked Changes. Magnetic materials. Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
  • 21/30438135 DC BS EN IEC 60404-3. Magnetic materials. Part 3. Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • BS EN ISO 11127-6:1994 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Determination of water-soluble contaminants by conductivity measurement
  • BS EN ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble contaminants by conductivity measurement
  • 20/30415005 DC BS EN 60404-3 Ed.3.0. Magnetic materials. Part 3. Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • BS 6404-13:1996 Magnetic materials - Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • 19/30393960 DC BS EN 60404-11. Magnetic materials. Part 11. Methods of measurement of the surface insulation resistance of electrical steel strip and sheet
  • BS EN ISO 12127-1:2015 Clothing to protect against heat and flame. Determination of contact heat transmission through clothing or constituent materials. Contact heat produced by heating cylinder
  • 20/30425840 DC BS EN IEC 60749-39. Semiconductor devices. Mechanical and climatic test methods. Part 39. Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • 20/30411134 DC BS EN IEC 60404-11. Magnetic materials. Part 11. Methods of measurement of the surface insulation resistance of electrical steel strip and sheet
  • BS ISO 24687:2023 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
  • PD IEC/TS 62607-4-3:2015 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Contact and coating resistivity measurements for nanomaterials
  • BS ISO 10676:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
  • BS EN ISO 11127-6:2022 Tracked Changes. Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble contaminants by conductivity measurement
  • BS IEC 62899-204:2019 Printed electronics - Materials. Insulator ink. Measurement methods of properties of insulator inks and printed insulating layers
  • BS PD IEC/TS 62607-4-3:2015 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Contact and coating resistivity measurements for nanomaterials
  • PD IEC/TS 62607-4-6:2018 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Determination of carbon content for nano-enabled electrode materials, infrared absorption method
  • 20/30415912 DC BS EN 60404-17. Magnetic materials. Part 17. Methods of measurement of the magnetostriction characteristics of grain oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
  • BS ISO 27448:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials - Measurement of water contact angle
  • 22/30425870 DC BS ISO 24687. Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
  • BS EN 61338-1-3:2000 Waveguide type dielectric resonators.. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • 20/30429879 DC BS EN IEC 60404-17. Magnetic materials. Part 17. Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
  • PD IEC/TS 62607-4-2:2016 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Physical characterization of cathode nanomaterials, density measurement
  • PD IEC TS 62607-4-8:2020 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Determination of water content in electrode nanomaterials, Karl Fischer method
  • BS 6043-3.8.1:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Carboxy reactivity of prebaked anodes. Determination of the reactivity by a loss in mass method
  • BS EN 61338-1-4:2006 Waveguide type dielectric resonators — Part 1-4: General information and test conditions — Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
  • PD ISO/TS 18827:2017 Nanotechnologies. Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
  • BS IEC 62899-202-7:2021 Printed electronics. Materials. Printed film. Measurement of peel strength for printed layer on flexible substrate by the 90° peel method
  • BS ISO 19810:2023 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment. Measurement of water contact angle
  • PD IEC TS 62607-3-3:2020 Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon counting (TCSPC)
  • BS EN ISO 182-3:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Conductometric method
  • BS EN ISO 182-3:1993 Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Conductometric method
  • BS EN 60811-604:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of absence of corrosive components in filling compounds
  • BS EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of Materials
  • BS EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material

Danish Standards Foundation, How to measure the conductivity of a material

  • DS/EN ISO 2360:2004 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
  • DS/IEC 216-2:1991 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 2: Choice of test criteria
  • DS/ISO 17312:2005 Soil quality - Determination of hydraulic conductivity of saturated porous materials using a rigid wall permeameter
  • DS/ISO 17313:2004 Soil quality - Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
  • DS/EN 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • DS/IEC 216-1:1991 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 1: General guidelines for ageing procedures and evaluation of test results
  • DS/EN ISO 14372:2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
  • DS/EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
  • DS/EN IEC 60404-11:2021 Magnetic materials – Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet
  • DS/EN 1149-2:1998 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
  • DS/IEC 216-4:1982 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 4: Instruction for calculating the thermal endurance profile
  • DS/EN 50324-2:2002 Piezoelectric properties of ceramic materials and components - Part 2: Methods of measurement - Low power
  • DS/EN 50324-3:2002 Piezoelectric properties of ceramic materials and components - Part 3: Methods of measurement - High power
  • DS/EN 60404-2/A1:2008 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame
  • DS/EN 60404-2:1998 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame
  • DS/EN ISO 13503-5:2006 Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants
  • DS/EN 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods -- Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • DS/EN 60404-13:2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • DS/EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
  • DS/EN ISO 11127-6:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
  • DS/EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
  • DS/IEC 216-3:1981 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 3: Statistical methods

American Society for Testing and Materials (ASTM), How to measure the conductivity of a material

  • ASTM E377-08(2020) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
  • ASTM E2584-07 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
  • ASTM D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D5084-16 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • ASTM E2584-14 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance 40;Slug41; Calorimeter
  • ASTM C1702-15a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM D6095-06 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
  • ASTM D6095-12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
  • ASTM D6095-12(2018) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
  • ASTM E2584-10 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
  • ASTM C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM C1702-17 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM C1702-14 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM D5084-03 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D6095-12(2023) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
  • ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM C1702-23 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM D7760-18 Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
  • ASTM C1702-15 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM C1702-15b Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • ASTM D3874-04 Standard Test Method for Ignition of Materials by Hot Wire Sources
  • ASTM D3874-03 Standard Test Method for Ignition of Materials by Hot Wire Sources
  • ASTM D3874-97 Standard Test Method for Ignition of Materials by Hot Wire Sources
  • ASTM D3874-12 Standard Test Method for Ignition of Materials by Hot Wire Sources
  • ASTM D3874-13 Standard Test Method for Ignition of Materials by Hot Wire Sources
  • ASTM D5084-00e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D5084-00 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • ASTM D5568-22 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • ASTM E601-07e1 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E601-07 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E601-81(1997) Standard Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air
  • ASTM E601-20 Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air
  • ASTM E601-15 Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM D5568-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • ASTM E601-07a Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E601-07a(2013) Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM D7091-20 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM D7091-21 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • ASTM D6391-99 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
  • ASTM D6391-99(2004) Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
  • ASTM D6113-16 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ASTM D6391-06 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
  • ASTM D7449/D7449M-08e1 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
  • ASTM D7449/D7449M-08 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
  • ASTM D7449/D7449M-22 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
  • ASTM D7449/D7449M-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
  • ASTM D7449/D7449M-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
  • ASTM A932/A932M-01(2006) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
  • ASTM A932/A932M-01(2012) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
  • ASTM D6113-03 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ASTM D6113-10 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

Japanese Industrial Standards Committee (JISC), How to measure the conductivity of a material

  • JIS H 0505:1975 Measuring methods for electrical resistivity and conductivity of non-ferrous materials
  • JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
  • JIS H 7311:2006 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
  • JIS C 3666-2:2002 Test on gases evolved during combustion of electric cables -- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
  • JIS C 2500:2022 Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet
  • JIS R 1708:2016 Fine ceramics (Advanced ceramics, advanced technical ceramics) -- Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption

IT-UNI, How to measure the conductivity of a material

Professional Standard - Electron, How to measure the conductivity of a material

  • SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
  • SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
  • SJ/T 11457.1.3-2021 Waveguide type dielectric resonators Part1-3：General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
  • SJ/T 11457.1.4-2021 Waveguide type dielectric resonators Part1-4：General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimeter-wave frequency

International Electrotechnical Commission (IEC), How to measure the conductivity of a material

  • IEC 62899-202-4:2021 Printed electronics - Part 202-4: Materials - Conductive ink - Measurement methods for properties of stretchable printed layers (conductive and insulating)
  • IEC 62899-202-3:2019 Printed electronics - Part 202-3: Materials - Conductive ink - Measurement of sheet resistance of conductive films - Contactless method
  • IEC TR 60216-5:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 5: guidelines for the application of thermal endurance characteristics
  • IEC 62899-202-6:2020 Printed electronics - Part 202-6: Materials - Conductive ink - Measurement method for resistance changes under high temperature and humidity - Printed conductive layer on a flexible substrate
  • IEC 62899-202-10:2023 Printed electronics - Part 202-10: Materials - Resistance measurement method for thermoformable conducting layer
  • IEC 62899-201-2:2021 Printed electronics - Part 201-2: Materials - Substrates - Measurement methods for properties of stretchable substrates
  • IEC TR 63304:2021 Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet
  • IEC 60754-2:2011 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductibity
  • IEC 63203-201-2:2022 Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials
  • IEC 60754-2:2011/AMD1:2019 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
  • IEC 60754-2:2019 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
  • IEC 60754-1:2019 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
  • IEC 60754-2:2011+AMD1:2019 CSV Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
  • IEC 60216-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 1: general guidelines for ageing procedures and evaluation of test results
  • IEC 60404-10:2016 RLV Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies
  • IEC 60404-3:1992+AMD1:2002+AMD2:2009 CSV Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • IEC 60404-2:1978 Magnetic materials. Part 2 : Methods of measurement of magnetic, electrical and physical properties of magnetic sheet and strip
  • IEC 63203-201-2:2022/COR1:2023 Corrigendum 1 - Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials
  • IEC 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • IEC 62047-14:2012 Semiconductor devices - Microelectromechanical devices - Part 14: Forming limit measuring method of metallic film materials
  • IEC 60404-3:2010 Magnetic materials – Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (Edition 2.2 Consolidated Reprint)
  • IEC 60404-16:2018/COR1:2018 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • IEC 60404-8-5:2020 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • IEC 60404-9:2018 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • IEC 60404-3:2022 RLV Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • IEC 60404-3:2022 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • IEC 60404-10:2016/COR1:2018 Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies; Corrigendum 1
  • IEC 60404-2:1996+AMD1:2008 CSV Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • IEC 60404-2:1996 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • IEC 60749-39:2021 RLV Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • IEC 60749-39:2021 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • IEC 62044-2:2005 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level
  • IEC 60404-13:1995 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
  • IEC 60754-2:1991 Test on gases evolved during combustion of electric cables; part 2: determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
  • IEC 60404-2:2008 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • IEC 61189-2-501:2022 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of resil
  • IEC 60404-2:1996/AMD1:2008 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame; Amendment 1
  • IEC 62044-2:2005/COR1:2021 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level; Corrigendum 1
  • IEC 60404-3:1992/AMD2:2009/COR1:2009 Corrigendum 1 - Amendment 2 - Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • IEC 60216-3-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 3: instructions for calculating thermal endurance characteristics; section 1: calculations using mean values of normally distributed complete data
  • IEC TS 62607-5-4:2022 Nanomanufacturing - Key control characteristics - Part 5-4: Energy band gap measurement of nanomaterials by electron energy loss spectroscopy (EELS)
  • IEC 60404-2:1996/AMD1:2008/COR1:2018 Corrigendum 1 - Amendment 1 - Magnetic materials - Part 2: Methods of measurement of magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • IEC TS 62607-4-2:2016 Nanomanufacturing - Key control characteristics - Part 4-2: Nano-enabled electrical energy storage - Physical characterization of cathode nanomaterials, density measurement
  • IEC 61338-1-4:2005 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
  • IEC 62899-204:2019 Printed electronics - Part 204: Materials - Insulator ink - Measurement methods of properties of insulator inks and printed insulating layers

Lithuanian Standards Office , How to measure the conductivity of a material

  • LST EN ISO 2360:2004 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003)
  • LST EN 10280+A1-2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
  • LST EN 50267-2-2-2000 Common test methods for cables under fire conditions. Tests on gases evolved combustion of materials from cables. Part 2-2: Procedures. Determination of degree of acidity of gases for materials by measuring pH and conductivity
  • LST EN 1149-2-2000 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
  • LST EN 61788-13-2013 Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012)
  • LST EN 50324-3-2003 Piezoelectric properties of ceramic materials and components. Part 3: Methods of measurement. High power
  • LST EN 50324-2-2003 Piezoelectric properties of ceramic materials and components. Part 2: Methods of measurement Low power
  • LST EN 60754-2-2014 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity (IEC 60754-2:2011)
  • LST EN ISO 14372:2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)
  • LST EN 60749-39-2006 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2006)
  • LST EN ISO 13503-5:2006 Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)
  • LST EN 60404-13-2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip (IEC 60404-13:1995)
  • LST EN 60404-2-2001 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (IEC 60404-2:1996)
  • LST EN ISO 11127-6:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011)
  • LST EN 60811-409-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths (IEC 60811-409:2012)
  • LST EN 60811-604-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds (IEC 60811-604:2012)
  • LST EN 60404-2-2001/A1-2008 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (IEC 60404-2:1996/A1:2008)
  • LST EN 60404-2-2001/A1-2008/AC-2009 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (IEC 60404-2:1996/A1:2008)

AENOR, How to measure the conductivity of a material

  • UNE-EN ISO 2360:2004 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003)
  • UNE-EN 60754-2:2014 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
  • UNE-EN 60404-2:1999 MAGNETIC MATERIALS. PART 2: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF ELECTRICAL STEEL SHEET AND STRIP BY MEANS OF AN EPSTEIN FRAME
  • UNE-EN 60404-2:1999/A1:2008 Magnetic materials -- Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame
  • UNE-EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
  • UNE-EN ISO 11127-6:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011)

Korean Agency for Technology and Standards (KATS), How to measure the conductivity of a material

  • KS C IEC 62899-202-3:2021 Printed electronics — Part 202-3: Materials — Conductive ink —Measurement of sheet resistance of conductive films Contactless method
  • KS C IEC 60216-2:2008 Electrical insulating materials－Thermal endurance properties－Part 2：Determination of thermal endurance properties of electrical insulating materials－Choice of test criteria
  • KS C 6520-2021 Components and materials of semiconductor process —Measurement of wear characteristics by plasma
  • KS C 0304-2014(2019) Method of measurement for the electromagnetic shielding effectiveness of planar materials
  • KS C IEC 60754-2:2003 Test on gases evolved during combustion of electric cables-Part 2:Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
  • KS C 6520-2019 Components and materials of semiconductor process —Measurement of wear characteristics by plasma
  • KS C IEC 60754-2:2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
  • KS I ISO 17313:2021 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
  • KS B ISO 14372:2014 Welding consumables — Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
  • KS B ISO 14372:2004 Welding consumables-Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
  • KS C IEC 60404-2-2015(2020) Magnetic materials－Part 2：Methods of measurement ofthe magnetic properties of electrical steel sheet andstrip by means of an Epstein frame
  • KS C IEC 60404-2:2005 Magnetic materials-Part 2:Methods of measurement ofthe magnetic properties of electrical steel sheet andstrip by means of an Epstein frame
  • KS C IEC 60749-39:2006 Semiconductor devices－Mechanical and climatic test methods－Part 39：Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • KS M ISO 11127-6-2013(2018) Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conduc
  • KS C IEC 60216-4-1:2008 Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
  • KS C IEC 60749-39-2006(2021) Semiconductor devices－Mechanical and climatic test methods－Part 39：Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • KS C IEC 60404-13:2002 Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • KS C IEC 60404-13-2002(2022) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • KS C IEC 60404-13-2002(2017) Magnetic materials－Part 13：Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • KS C IEC 60068-3-12:2012 Environmental testing－Part 3-12：Supporting documentation and guidance－Method to evaluate a possible lead-free solder reflow temperature profile
  • KS C IEC 60811-409-2015(2020) Electric and optical fibre cables — Test methods for non-metallic materials — Part 409: Miscellaneous tests — Loss of mass test for thermoplastic insulations and sheaths
  • KS C IEC 60811-604:2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds
  • KS L ISO 27448-2011(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for self-cleaning performance of semiconducting photocatalytic materials－Measurement of water contact angle
  • KS L ISO 27448:2011 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for self-cleaning performance of semiconducting photocatalytic materials-Measurement of water contact angle
  • KS P ISO 16429:2010 Implants for surgery－Measurements of open-circuit potential to assess corrosion behaviour of etallic implantable materials and medical devices over extended time periods
  • KS M ISO 11127-6:2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by cond
  • KS C IEC TS 62607-4-2:2021 Nanomaunfacturing — Key control characteristics — Part 4-2: Nano-enabled electrical energy storage — Physical characterization of cathode nanomaterials, density measurement
  • KS C ISO TS 18827:2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials

KR-KS, How to measure the conductivity of a material

  • KS C IEC 62899-202-3-2021 Printed electronics — Part 202-3: Materials — Conductive ink —Measurement of sheet resistance of conductive films Contactless method
  • KS C IEC 60754-2-2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
  • KS I ISO 17313-2021 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
  • KS M ISO 6376-2003(2023)
  • KS C IEC 60811-604-2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds
  • KS C IEC TS 62607-4-3-2023 Nanomanufacturing — Key control characteristics — Part 4-3: Nano-enabled electrical energy storage — Contact and coating resistivity measurements for nanomaterials
  • KS M ISO 11127-6-2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by cond
  • KS C IEC TS 62607-4-2-2021 Nanomaunfacturing — Key control characteristics — Part 4-2: Nano-enabled electrical energy storage — Physical characterization of cathode nanomaterials, density measurement
  • KS C ISO TS 18827-2021 Nanotechnologies — Electron spin resonance(ESR) as a method for measuring reactive oxygen species(ROS) generated by metal oxide nanomaterials

European Committee for Electrotechnical Standardization（CENELEC）, How to measure the conductivity of a material

  • HD 611.5 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 5: Guidelines for the Application of Thermal Endurance Characteristics
  • EN 62788-1-5:2016/AC:2017-11 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions
  • EN IEC 63203-201-2:2022 Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials
  • EN 60754-2:2014 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
  • HD 611.1 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Guidelines for Ageing Procedures and Evaluation of Test Results
  • EN 50267-2-2:1998 Common Test Methods for Cables under Fire Conditions - Tests on Gases Evolved During Combustion of Materials from Cables - Part 2-2: Procedures - Determination of Degree of Acidity of Gases for Materials by Materials by Measuring pH and Conductivity
  • EN IEC 60404-3:2022 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
  • EN 50324-3:2002 Piezoelectric properties of ceramic materials and components Part 3: Methods of measurement - High power
  • EN 50324-2:2002 Piezoelectric properties of ceramic materials and components Part 2: Methods of measurement - Low power
  • EN IEC 60749-39:2022 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • EN 60404-13:2007 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
  • HD 602 S1-1992 Test on Gases Evolved During Combustion of Materials from Cables Determination of Degree of Acidity (Corrosivity) of Gases by Measuring pH and Conductivity
  • EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
  • HD 611.3.1 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 3: Instructions for Calculating Thermal Endurance Characteristics Section One: Calculations Using Mean Values of Normally Distributed Complete Data
  • EN 60404-2:1998/A1:2008 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • EN 60404-2:1998 Magnetic materials Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (Incorporates Amendment A1: 2008)
  • EN 61338-1-3:2000 Waveguide Type Dielectric Resonators - Part 1-3: General Information and Test Conditions - Measurement Method of Complex Relative Permittivity for Dielectric Resonator Materials at Microwave Frequency test conditions - Measurement Method of Complex Relati
  • EN 50267-2-3:1998 Common Test Methods for Cables under Fire Conditions - Tests on Gases Evolved During Combustion of Materials from Cables - Part 2-3: Procedures - Determination of Degree of Acidity of Gases for Cables by Determination of the Weighted Average of pH and Con

CZ-CSN, How to measure the conductivity of a material

  • CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
  • CSN 34 6412-1985 Testing methods of electrical insulating materials.Determination of resistance of electrical materials against moulds measured by surface electrical resistivity
  • CSN 72 5019-1982 Testing of ceramic electrotechnlc materials. Methods of the modulus of rigidity
  • CSN 34 6311-1984 Testing of ceramic elektrolochtiic mulo rials. Methods of determination of tin; elasticity modulus
  • CSN 34 7021-2-1995 Test on gases evolved during the combustion of electric cables Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity

RU-GOST R, How to measure the conductivity of a material

  • GOST R 8.621-2006 State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method
  • GOST R 8.830-2013 State system for ensuring the uniformity of measurements. Optical density of photomaterials. Method of measurement
  • GOST R IEC 60754-1-1999 Tests of materials from cables during combustion. Determination of the amount of evolved halogen acid gas
  • GOST R IEC 60754-2-1999 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
  • GOST IEC 60754-2-2015 Test on gases evolved during combustion of materials from cables. Part 2. Determination of acidity (by pH measurement) and conductivity
  • GOST R 56741-2015 Composites. Method of measuring the uniformity of absorbing electrochromic coating on a glazing surface
  • GOST R IEC 811-1-1-1998 General test methods for insulating and sheathing materials of electric cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
  • GOST IEC 60811-1-1-2011 General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
  • GOST R IEC 60811-1-1-1998 General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
  • GOST R 8.735.1-2014 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the State Primary Standard based on coulomet

ES-UNE, How to measure the conductivity of a material

  • UNE-EN ISO 2360:2018 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
  • UNE-EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (Endorsed by AENOR in November of 2012.)
  • UNE-EN 1149-2:1998 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
  • UNE-EN 60754-2:2014/A1:2021 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
  • UNE-EN IEC 60404-3:2022 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (Endorsed by Asociación Española de Normalización in January of 2023.)
  • UNE-EN IEC 63203-201-2:2022 Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials (Endorsed by Asociación Española de Normalización in July of 2022.)
  • UNE-EN 60404-2:1999/A1:2008/AC:2018-08 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
  • UNE-EN 50324-3:2002 Piezoelectric properties of ceramic materials and components -- Part 3: Methods of measurement - High power (Endorsed by AENOR in August of 2002.)
  • UNE-EN 50324-2:2002 Piezoelectric properties of ceramic materials and components -- Part 2: Methods of measurement - Low power (Endorsed by AENOR in August of 2002.)
  • UNE-EN IEC 60404-11:2021 Magnetic materials - Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in October of 2021.)
  • UNE-EN 62047-14:2012 Semiconductor devices - Micro-electromechanical devices - Part 14: Forming limit measuring method of metallic film materials (Endorsed by AENOR in June of 2012.)
  • UNE-EN IEC 60749-39:2022 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (Endorsed by Asociación Española de Normalización in March of 2022.)
  • UNE-EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires (Endorsed by Asociación Española de Normalización in October of 2018.)
  • UNE-EN 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods -- Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2006). (Endorsed by AENOR in November of 2006.)
  • UNE-EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in December of 2018.)
  • UNE-EN IEC 60404-17:2021 Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor (Endorsed by Asociación Española de Normalización...
  • UNE-EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems (Endorsed by AENOR in November of 2013.)
  • UNE-EN ISO 11127-6:2023 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2022)

IN-BIS, How to measure the conductivity of a material

American National Standards Institute （ANSI), How to measure the conductivity of a material

  • ANSI/ASTM D6095:2012 Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
  • ANSI/ASTM D3874:2013 Test Method for Ignition of Materials by Hot Wire Sources
  • ANSI/ESD STM11.11-1993 ESD Association Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Static Dissipative Planar Materials
  • ANSI/ASTM A773/A 773M:2001 Test Method for D-C Magnetic Properties of Materials Using Ring and Permeameter Procedures with D-C Electronic Hysteresigraphs
  • ANSI/ASTM D6113:1999 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ANSI/ASTM D7449:2008 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Transmission Line
  • ANSI/ASTM D6113:2011 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

German Institute for Standardization, How to measure the conductivity of a material

  • DIN 50447:1995 Testing of materials for semiconductor technology - Contactless determination of the electrical sheet resistance of semiconductor layers with the eddy-current method
  • DIN EN 10280:2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester; German version EN 10280:2001+A1:2007
  • DIN EN ISO 2360:2017-12 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017); German version EN ISO 2360:2017
  • DIN EN 10252:1997-05 Magnetic materials - Methods of measurement of magnetic properties of electrical steel sheet and strip at medium frequencies; German version EN 10252:1997
  • PAS 1022-2004 Reference procedure for the determination of optical and dielectric material properties and the layer thickness of thin films by ellipsometry
  • DIN CEN/TS 16599:2014-07*DIN SPEC 7397:2014-07 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions; German version CEN/TS 16599:2014
  • DIN IEC 60404-3 Berichtigung 1:2010-09 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:1992 + A1:2002 + A2:2009), Corrigendum to DIN IEC 60404-3:2010-05 / Note: To be replaced b...
  • DIN EN 1149-2:1997-11 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance); German version EN 1149-2:1997
  • DIN IEC 60404-3:2010-05 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:1992 + A1:2002 + A2:2009) / Note: To be replaced by DIN EN IEC 60404-3 (2021-07).
  • DIN EN 10280:2001 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester; German version EN 10280:2001
  • DIN 53483-3:1969-07 Testing of Insulating Materials; Determination of Dielectric Properties; Measuring Cells for Liquids for Frequencies up to 100 MHz
  • DIN 50440:1998 Testing of materials for semiconductor technology - Measurement of carrier lifetime in silicon single crystals - Recombination carrier lifetime at low injection by photoconductivity method
  • DIN 53483-3:1969 Testing of Insulating Materials; Determination of Dielectric Properties; Measuring Cells for Liquids for Frequencies up to 100 MHz
  • DIN EN 1149-2:1997 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance); German version EN 1149-2:1997
  • DIN EN IEC 60404-3:2021-07 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 68/661/CD:2020); Text in German and English / Note: Date of issue 2021-06-11*Intended as replaceme...
  • DIN EN 60749-39:2007 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2006); German version EN 60749-39:2006
  • DIN EN 60404-2:2009-01 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (IEC 60404-2:1996 + A1:2008); German version EN 60404-2:1998 + A1:2008 / Note: DIN EN 60404-2 (1998-12) rema...
  • DIN EN 60404-2 Berichtigung 1:2019-05 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (IEC 60404-2:1996/A1:2008/COR1:2018); German version EN 60404-2:1998/A1:2008/AC:2018-08
  • DIN EN 60404-2:1998 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC 60404-2:1996); German version EN 60404-2:1998
  • DIN 52612-3:1979 Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Thermal Resistance of Laminated Materials for Use in Building Practice
  • DIN EN 62047-14:2012-10 Semiconductor devices - Micro-electromechanical devices - Part 14: Forming limit measuring method of metallic film materials (IEC 62047-14:2012); German version EN 62047-14:2012
  • DIN EN 60749-39:2007-01 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2006); German version EN 60749-39:2006 / Note: To be r...
  • DIN 50456-3:1999 Testing of materials for semiconductor technology - Method for the characterisation of moulding compounds for electronic components - Part 3: Determination of cationic impurities
  • DIN EN 60404-2:2009 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (IEC 60404-2:1996 + A1:2008); German version EN 60404-2:1998 + A1:2008
  • DIN 50435:1988 Testing of semiconductor materials; determination of the radial resistivity variation of silicon or germanium slices by means of the four-probe/direct current method
  • DIN EN ISO 11127-6:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011); German version
  • DIN 50443-1:1988 Testing of materials for use in semiconductor technology; detection of crystal defects and inhomogeneities in silicon single crystals by X-ray topography
  • DIN EN ISO 13503-5:2006-10 Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006); English version EN ISO 13503-5:2006
  • DIN EN IEC 60404-13:2020-06 Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (IEC 60404-13:2018); German version EN IEC 60404-13:2018 / Note: DIN EN 60404-13 (2008-05) remains valid alongside this...
  • DIN EN 60404-13:2008 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip (IEC 60404-13:1995); German version EN 60404-13:2007
  • DIN 50455-1:1991 Testing of materials for semiconductor technology; methods for characterizing photoresists; determination of coating thickness with optical methods
  • DIN EN 62047-8:2011-12 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films (IEC 62047-8:2011); German version EN 62047-8:2011
  • DIN EN IEC 60404-17:2023-04 Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor (IEC 60404-17:2021); German version EN IEC 60404-17:...
  • DIN 50431:1988 Testing of semiconductor materials; measurement of the resistivity of silicon or germanium single crystals by means of the four probe/direct current method with collinear array
  • DIN EN 62047-11:2014-04 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems (IEC 62047-11:2013); German version EN 62047-11:2013
  • DIN EN IEC 60749-39:2021-07 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 47/2652/CDV:2020); English version prEN IEC 60749-39:2020 / Not...
  • DIN EN IEC 61189-2-501:2020 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of Resilience strength and Resilience strength Retention Factor
  • DIN EN IEC 61189-2-501:2020-12 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of Resilience strength and Resilience strength Retention Fact...
  • DIN EN ISO 11127-6:2023-02 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2022); German vers...
  • DIN EN 60754-2:2015 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity (IEC 60754-2:2011); German version EN 60754-2:2014
  • DIN EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005
  • DIN EN 14668 Berichtigung 1:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005, Corrigenda to DIN EN 14668:2005-09; German version EN 14
  • DIN EN 61338-1-3:2000 Waveguide type dielectric resonators - Part 1-3: General information and test conditions; Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (IEC 61338-1-3:1999); German version EN 61338-1-3:2000
  • DIN 50456-2:1995 Testing of materials for semiconductor technology - Method for the characterisation of moulding compounds for electronic components - Part 2: Determination of ionic impurities using pressure cooker test
  • DIN IEC 60404-3:2010 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:1992 + A1:2002 + A2:2009)
  • DIN 50451-5:2010 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 5: Guideline for the selection of materials and testing of their suitability for apparatus for sampling and sample preparation for the determination of t
  • DIN EN ISO 11127-6:2023 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2022)
  • DIN EN 50324-2:2002 Piezoelectric properties of ceramic materials and components - Part 2: Methods of measurement; Low power; German version EN 50324-2:2002
  • DIN EN 50324-3:2002 Piezoelectric properties of ceramic materials and components - Part 3: Methods of measurement; High power; German version EN 50324-3:2002
  • DIN EN 60754-2:2021 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity (IEC 60754-2:2011 + A1:2019); German version EN 60754-2:2014 + A1:2020
  • DIN IEC/TS 62607-4-3:2018-07*DIN SPEC 42607-4-3:2018-07 Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials (IEC/TS 62607-4-3:2015)
  • DIN EN 61338-1-4 Berichtigung 1:2007 Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (IEC 61338-1-4:2005); German version EN 61338-1-
  • DIN EN IEC 60749-39:2021 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 47/2652/CDV:2020); English version prEN IEC 60749-39:2020
  • DIN EN IEC 60749-39:2023-10 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2021); German version EN IEC 60749-39:2022 / Note: DIN...
  • DIN 50451-4:2007-02 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 4: Determination of 34 elements in ultra pure water by mass spectrometry with inductively coupled plasma (ICP-MS)
  • DIN EN 62047-14:2012 Semiconductor devices - Micro-electromechanical devices - Part 14: Forming limit measuring method of metallic film materials (IEC 62047-14:2012); German version EN 62047-14:2012

YU-JUS, How to measure the conductivity of a material

  • JUS G.E0.049-1977 Product on polymer bases. Measurement of resistivity on conducting and antistatic test pieces from polimeric materials
  • JUS N.C0.085-1989 Test on gases evolved during combustion of electric cables. Determinstion of the amount of halogen acidgas evolved during the combustion of polvmeric materials taken from cables

RO-ASRO, How to measure the conductivity of a material

  • STAS 12149/3-1985 ELECTRICAL INSULATING MATERIALS MEASUREMENT OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS Test procedures for permanent effects
  • STAS 10223/3-1984 Electrical rotating machines BRUSHES Test methods for the measurement of the operational characteristics of brush materials

PT-IPQ, How to measure the conductivity of a material

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to measure the conductivity of a material

  • GB/T 35679-2017 Measuring method for electromagnetic parameters of solid materials at microwave frequencies using waveguide
  • GB/T 33827-2017 Determination of magnetic impurities in anode nanomaterials for Li-ion battery

HU-MSZT, How to measure the conductivity of a material

ZA-SANS, How to measure the conductivity of a material

  • SANS 60754-2:1991 Test on gases evolved during combustion of materials from cables Part 2: Determination of degree of acidity of gases by measuring pH and conductivity

European Committee for Standardization (CEN), How to measure the conductivity of a material

  • CEN/TS 16599:2014 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
  • HD 611.2 S1-1992 Guide for the determination of thermal endurance properties of electrical insulating materials; part 2: choice of test criteria (IEC 216-2:1990)
  • EN 10252:1997 Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
  • EN ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
  • EN 1149-2:1997 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
  • HD 611.4.1 S1-1992 Guide for the determination of thermal endurance properties of electrical insulating materials; part 4: ageing ovens; section 1: single-chamber ovens (IEC 216-4-1:1990)
  • EN 10280:2001 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester (Incorporates Amendment A1: 2007)
  • EN ISO 11127-6:2022 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2022)
  • EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
  • prEN ISO 11127-6:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO/DIS 11127-6:2021)
  • EN ISO 11127-6:1997 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 6: Determination of water-soluble contaminants by conductivity measurement ISO 11127-6: 1993

Standard Association of Australia （SAA）, How to measure the conductivity of a material

  • AS/NZS IEC 60754.2:2017 Test on gases evolved during combustion of materials from cables, Part 2: Determination of acidity (by pH measurement) and conductivity
  • AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials
  • AS/NZS 2442.1/SUPP 7:1998 Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Table cloth (Supplement to AS/NZS 2442.1:1996)
  • AS/NZS 2442.1/SUPP 6:1998 Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Double bed sheet (Supplement to AS/NZS 2442.1:1996)

CENELEC - European Committee for Electrotechnical Standardization, How to measure the conductivity of a material

  • EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • EN 61788-13:2003 Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
  • EN IEC 60404-13:2018 Magnetic materials - Part 13: Methods of measurement of resistivity@ density and stacking factor of electrical steel strip and sheet

AT-ON, How to measure the conductivity of a material

  • ONORM E 3654-1993 Test on gases evolved during the combustion of materials from cables - Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity (IEC 754-2:1991, modified)

AT-OVE/ON, How to measure the conductivity of a material

  • OVE EN 60754-2-2021 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity (german version)
  • OVE EN IEC 63203-201-2:2021 Wearable electronic devices and technologies - Part 201-2: Electronic Textile - Measurement methods for basic properties of conductive fabric and insulation materials (IEC 124/138/CDV) (english version)
  • OVE EN IEC 60749-39:2020 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 47/2652/CDV) (english version)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure the conductivity of a material

  • GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
  • GB/T 17650.2-1998 Test on gases evolved during combustion of materials from cables. Part 2: Determination of degree of acidity of gases by measuring pH and conductivity
  • GB/T 18570.9-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 9:Field method for the conductometric determination of water-soluble salts

International Organization for Standardization (ISO), How to measure the conductivity of a material

  • ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer)
  • ISO 24687:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures
  • ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water
  • ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
  • ISO 11127-6:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement
  • ISO 27448:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials - Measurement of water contact angle
  • ISO/TS 18827:2017 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
  • ISO 16429:2004 Implants for surgery - Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
  • ISO 11127-6:2022 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by cond

BE-NBN, How to measure the conductivity of a material

  • NBN-HD 602-1994 Test on gases evolved during the combustion of materials from cables. Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity

Insulated Cable Engineers Association （ICEA), How to measure the conductivity of a material

  • ICEA T-32-645-2012 TEST METHOD FOR ESTABLISHING VOLUME RESISTIVITY COMPATIBILITY OF WATER BLOCKING COMPONENTS WITH EXTRUDED SEMICONDUCTING SHIELD MATERIALS

NZ-SNZ, How to measure the conductivity of a material

  • AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity
  • AS/NZS 1660.5.3:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.3: Fire Tests - Determination of the Amount of Halogen Acid Gas Evolved During the Combustion of Polymeric Materials Taken from Cables

Hebei Provincial Standard of the People's Republic of China, How to measure the conductivity of a material

  • DB13/T 5025.3-2019 Determination method of graphene-carbon nanotube composite conductive paste Part 3: Determination of magnetic foreign matter content

未注明发布机构, How to measure the conductivity of a material

  • BS 6404-13:1996(1999) Magnetic materials — Part 13 : Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • BS 1902-5.5:1991(2009) Methods of testing Refractory materials — Part 5 : Refractory and thermal properties — Section 5.5 Determination of thermal conductivity (panel / calorimeter method) (method 1902 - 505)

Institute of Electrical and Electronics Engineers (IEEE), How to measure the conductivity of a material

  • IEEE Std 1026-1995 IEEE Recommended practice for test methods for determination of compatibility of materials with conductive polymeric insulation shields and jackets

GOSTR, How to measure the conductivity of a material

  • GOST R 8.978-2019 State system for ensuring the uniformity of measurements. Standard reference data. Pyezokeramic materials aNaNbO3 + bKNbO3 + cCuNb2O6. Dielectric, piezoelectric characteristics at the temperature of 25°C
  • GOST 8.015-1972 State system for ensuring the uniformity of measurements. Method of measurements of relative dielectric permittivity and tangent of dielectric dissipation angle of solid dielectrics made of thin leafed materials in the frequency band from 9 to 10 GHz

PH-BPS, How to measure the conductivity of a material

  • PNS ISO/TS 18827:2021 Nanotechnologies - Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials

Professional Standard - Light Industry, How to measure the conductivity of a material

  • QB/T 4969-2016 Surface active agents.Determination of cationic surfactant in raw materials and formulated products.Potentiometric titration method
  • QB/T 4970-2016 Surface active agents.Determination of anionic surfactant in raw materials and formulated products.Potentiometric titration method

Indonesia Standards, How to measure the conductivity of a material

  • SNI 04-6190.1.3-2001 Common test methods for insulating and sheating materilas of electric cables - Part 1: Methods for general applications - Section 3: Methods for determining the density - Water absorption tests - Shrink

Society of Automotive Engineers (SAE), How to measure the conductivity of a material

  • SAE J1113/21-1998 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electromagnetic Fields, 10 kHz to 18 GHz, Absorber-Lined Chamber
  • SAE J1113/21-2013 Electronmagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber

IEC - International Electrotechnical Commission, How to measure the conductivity of a material

  • PAS 62307-2002 Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Integrated Circuits (Edition 1.0; Jedec JESD22-A120: June 2001)

  Measuring the conductivity of materials, How to measure the coefficient of thermal expansion of a material, How to measure the conductivity of a material, How to Measure the Conductivity of Materials, How is the electrical conductivity of a material measured?.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved