ZH
RU
ES
of bending strength
of bending strength, Total:256 items.
In the international standard classification, of bending strength involves: Wood, sawlogs and sawn timber, Rubber, Construction materials, Wood-based panels, Paper and board, Semi-manufactures of timber, Ceramics, Adhesives, Structures of buildings, Materials for aerospace construction, Seals, glands, Glass, Mining and quarrying, Gears, Aerospace electric equipment and systems, Materials for the reinforcement of composites, Refractories, Products of the textile industry, Products of the chemical industry, Reinforced plastics, Elements of buildings.
CZ-CSN, of bending strength
- CSN 49 0115-1976 Wood. Determination of ultimate strength in flexure tests
- CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination
SE-SIS, of bending strength
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, of bending strength
- GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
- GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
- GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
- GB/T 14208-1993 Textile glass--Rovings--Determination of flexural strength of rod composites
- GB/T 14208.2-2009 Textile-glass-reinforced plastics.Determination of mechanical properties on rods made of roving-reinforced resin.Part 2:Determination of flexural strength
TR-TSE, of bending strength
- TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
- TS 2477-1976 Wood - Determination of Impact Bending Strength
Professional Standard - Chemical Industry, of bending strength
Association Francaise de Normalisation, of bending strength
- NF EN ISO 3327:2009 Métaux-durs - Détermination de la résistance à la flexion
- NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
- NF EN ISO 5402-2:2018 Cuir - Détermination de la résistance à la flexion - Partie 2 : méthode de flexion d'empeigne
- NF EN ISO 5402-1:2022 Cuir - Détermination de la résistance à la flexion - Partie 1 : méthode au flexomètre
- NF P12-702-2*NF EN 1052-2:2016 Methods of test for masonry - Part 2 : determination of flexural strength
- NF EN 13161:2008 Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant
- NF ISO 2493-2:2020 Papier et carton - Détermination de la résistance à la flexion - Partie 2 : rigidimètre Taber
- NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
- NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
- NF E23-030-3*NF ISO 6336-3:2020 Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength
- NF EN ISO 17138:2022 Céramiques techniques - Propriétés mécaniques des composites céramiques à température ambiante - Détermination de la résistance en flexion
- NF E23-030-3:2006 Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength.
- NF EN 12788:2006 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous atmosphère inerte - Détermination de la résistance en flexion
- NF EN 12789:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous air à pression atmosphérique - Détermination de la résistance en flexion
- NF EN 843-1:2007 Céramiques techniques avancées - Propriétés mécaniques des céramiques monolithiques à température ambiante - Partie 1 : détermination de la résistance à la flexion
- NF B51-020-10*NF ISO 13061-10:2018 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 10 : determination of impact bending strength
- NF T57-160-2*NF ISO 3597-2:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2 : determination of flexural strength.
- NF EN 820-1:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
- NF EN 61063:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
- NF EN 1186-13:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
- XP CEN/TS 14234:2003 Céramiques techniques avancées - Méthode d'essai des céramiques monolithiques - Propriétés thermomécaniques - Partie 1 : détermination de la résistance à la flexion à températures élevées
- NF EN ISO 12777-1/A1:2009 Méthodes d'essai des assemblages de palettes - Partie 1 : détermination de la résistance à la flexion des clous et autres éléments de fixation de type cheville, et des clous cavaliers
- NF EN ISO 12777-1:1996 Méthodes d'essai des assemblages de palettes - Partie 1 : détermination de la résistance à la flexion des clous et autres éléments de fixation de type cheville, et des clous cavaliers.
RO-ASRO, of bending strength
- STAS 9966-1974 HARDBOARD Determination of static bending slrength
- STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
International Organization for Standardization (ISO), of bending strength
- ISO 3348:1975 Wood; Determination of impact bending strength
- ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
- ISO 6336-3:1996 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
- ISO 6336-3:2019 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
- ISO 17565:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature
- ISO 14704:2000 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
- ISO 6336-3:1996/Cor 1:1999 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength; Technical Corrigendum 1
- ISO 6336-3:2006/cor 1:2008 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength; Technical Corrigendum 1
- ISO 3597-2:1993 Textile-glass-reinforced plastics; determination of mechanical properties on rods made of roving-reinforced resin; part 2: determination of flexural strength
- ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength
- ISO 14704:2000/Cor 1:2004 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature; Technical Corrigendum 1
- ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
- ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of ceramic tube and rings
- ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
Japanese Industrial Standards Committee (JISC), of bending strength
- JIS A 1106:1993 Method of test for flexural strength of concrete
- JIS R 1664:2004 Testing method for bending strength of porous fine ceramics
- JIS R 1624:1995 Testing method for bending strength of fine ceramic joint
- JIS R 1624:2010 Testing method for bending strength of fine ceramic joint
- JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
- JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature
RU-GOST R, of bending strength
European Committee for Standardization (CEN), of bending strength
- EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
- EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
- EN 1052-2:1999 Methods of Test for Masonry - Part 2: Determination of Flexural Strength
- EN 12372:2006 Natural stone test methods - Determination of flexural strength under concentrated load
- FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
- EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
- EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass
- EN 1052-2:2016/AC:2016 Methods of test for masonry - Part 2: Determination of flexural strength
- EN 993-7:1998 Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures
- EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
- DD ENV 820-1-1993 Advanced Technical Ceramics - Monolithic Ceramics - Thermomechanical Properties - Part 1: Determination of Flexural Strength at Elevated Temperatures
- DD ENV 12789-1998 Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature under Air at Atmospheric Pressure - Determination of Flexural Strength
- EN 658-3:2002 Advanced Technical Ceramics Mechanical Properties of Ceramic Composites at Room Temperature Part 3: Determination of Flexural Strength Supersedes ENV 658-3: 1992
- EN 1288-2:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 2: Coaxial Double Ring Test on Flat Specimens with Large Test Surface Areas
- EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
- EN 1288-5:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 5: Coaxial Double Ring Test on Flat Specimens with Small Test Surface Areas
Danish Standards Foundation, of bending strength
- DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
- DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
- DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
- DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
- DS/EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
- DS/EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
- DS/EN 12789:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
- DS/EN 658-3:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength
- DS/EN 820-1:2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures
- DS/EN 1288-5:2001 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
British Standards Institution (BSI), of bending strength
- BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
- BS EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
- BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
- BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
- BS EN 12372:2006 Natural stone test methods — Determination of flexural strength under concentrated load
- BS EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
- BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
- BS ISO 6336-3:2019 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
- BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
- 21/30403937 DC BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
- BS EN 658-3:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength
- BS EN 12372:2022 Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
- BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
- BS EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength
- BS EN 843-1:2006 Advanced technical ceramics - Mechanical properties of
monolithic ceramics at room temperature - Part 1: Determination of flexural strength
- BS EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with small test surface areas
- BS EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with large test surface areas
- 18/30377016 DC BS ISO 6336-3. Calculation of load capacity of spur and helical gears. Part 3. Calculation of tooth bending strength
- BS ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength
- BS ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
- BS EN ISO 17138:2022 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of flexural strength
- BS ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
- BS ISO 13765-4:2004 Refractory mortars - Determination of flexural bonding strength
- 15/30273227 DC BS ISO 13061-10. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 10. Determination of impact bending strength
Lithuanian Standards Office , of bending strength
- LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods
- LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load
- LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
- LST EN 843-1-2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
- LST EN 658-3-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength
- LST EN 12789-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
- LST EN 12788-2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
- LST EN 1288-2-2002 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
- LST EN 820-1-2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures
- LST EN 1288-5-2002 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
Indonesia Standards, of bending strength
- SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
- SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
- SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)
- SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending
AENOR, of bending strength
- UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
- UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
- UNE 56537:1979 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF STRENGHT AGAINST STATIC FLEXION.
- UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
- UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
- UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
- UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
- UNE-EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas.
German Institute for Standardization, of bending strength
- DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
- DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
- DIN 53864:1978-08 Testing of textiles; determination of the bending strength, method according to Schlenker
- DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
- DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
- DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
- DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- DIN 51030:2015-01 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
- DIN 51030:2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
- DIN EN 843-1:2008-08 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:2006
- DIN EN 1170-5:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
- DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
- DIN EN 12789:2003-01 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength; German version EN 12789:2002
- DIN EN 12788:2005-11 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength; German version EN 12788:2005
- DIN EN 820-1:2003-01 Advanced technical ceramics - Methods of testing monolithic ceramics; Thermo-mechanical properties - Part 1: Determination of flexural strength at elevated temperatures; German version EN 820-1:2002
- DIN EN 658-3:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength; German version EN 658-3:2002
- DIN 4865:2019-04 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of short fiber reinforced ceramic composites at room temperature - Determination of flexural strength
- DIN 53000-1:2019-04 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of short fiber reinforced ceramic composites at room temperature - Determination of flexural strength
- DIN 53000-3:2019-04 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of short fiber reinforced ceramic composites at room temperature - Determination of flexural strength
- DIN 53000-4:2019-04 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of short fiber reinforced ceramic composites at room temperature - Determination of flexural strength
- DIN 53000-2:2019-04 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of short fiber reinforced ceramic composites at room temperature - Determination of flexural strength
- DIN EN ISO 17138:2022-06 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength (ISO 17138:2014); German version EN ISO 17138:2022
未注明发布机构, of bending strength
- BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
- BS 1881-118:1983(1998) Testing concrete — Part 118 : Method for determination of flexural strength
- DIN EN ISO 17138:2022 High-performance ceramics – Mechanical properties of ceramic composite materials at room temperature – Determination of flexural strength
- BS ISO 6336-3:2019(2020) Calculation of load capacity of spur and helical gears Part 3 : Calculation of tooth bending strength
- BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
- BS 2782-10-Method 1008B:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008B : Determination of flexural strength on rods made of roving - reinforced resin
- ISO 6336-3:2006/Cor 1:2007 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
- BS EN 820-1:2002(2003) Advanced technical ceramics — Methods of testing monolithic ceramics — Thermomechanical properties — Part 1 : Determination of flexural strength at elevated temperatures
VN-TCVN, of bending strength
- TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
American Society for Testing and Materials (ASTM), of bending strength
- ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
- ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
- ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
- ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
- ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM C1674-23 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
- ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
- ASTM D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
Standard Association of Australia （SAA）, of bending strength
- AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
American Gear Manufacturers Association, of bending strength
- AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
- AGMA 2003-B97-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel, and Spiral Bevel Gear Teeth
- AGMA 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth
- AGMA 908-B89-1989(R1999) Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth Revision of AGMA 226.01
Guangdong Provincial Standard of the People's Republic of China, of bending strength
- DB44/T 1100.2-2012 Test methods for artificial stone: Part 2 Determination of bending strength
Society of Automotive Engineers (SAE), of bending strength
- SAE AMS4908F-1988 Titanium Alloy Sheet and Strip, 8Mn, Annealed, 110 ksi (760 MPa) Yield Strength
- SAE AMS6386C-2000 Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, of bending strength
- GB/T 35160.2-2017 Test methods for agglomerated stone—Part 2：Determination of flexural strength
PL-PKN, of bending strength
- PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne
CEN - European Committee for Standardization, of bending strength
- EN 12372:1999 Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Load
IN-BIS, of bending strength
AT-ON, of bending strength
- OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
ES-UNE, of bending strength
- UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
- UNE-EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength (Endorsed by AENOR in January of 2007.)
- UNE-EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength (Endorsed by AENOR in October of 2005.)
- UNE-EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
- UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
- UNE-EN 12789:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength (Endorsed by AENOR in July of 2003.)
- UNE-EN 820-1:2002 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures
- UNE-EN ISO 17138:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength (ISO 17138:2014) (Endorsed by Asociación Española de Normalización in May of 2022.)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, of bending strength
- PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
AASHTO - American Association of State Highway and Transportation Officials, of bending strength
- T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
- T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
- T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
- T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
- T177-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (Twentieth Edition; ASTM C293-94)
The American Road & Transportation Builders Association, of bending strength
- AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
- AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
IT-UNI, of bending strength
Korean Agency for Technology and Standards (KATS), of bending strength
- KS B ISO 6336-3-2015(2020) Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
- KS B ISO 6336-3:2006 Calculation of load capacity of spur and helical gears-Part 3:Calculation of tooth bending strength
- KS B ISO 6336-3:2015 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
- KS M ISO 3597-2-2012(2017) Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
- KS L ISO 17565:2006 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for flexural strength of monolithic ceramics at elevated temperature
- KS M ISO 3597-2:2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
- KS M ISO 3597-2:2012 Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
AGMA - American Gear Manufacturers Association, of bending strength
- 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur@ Helical and Herringbone Gear Teeth
NL-NEN, of bending strength
- NVN-ENV 658-3-1992 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 3: Determination of flexural strength
American National Standards Institute （ANSI), of bending strength
- ANSI/AGMA 2003-B-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
- ANSI/AGMA 2003-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
KR-KS, of bending strength
- KS M ISO 3597-2-2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength