ZH
RU
ES

copper wire

copper wire, Total:225 items.

In the international standard classification, copper wire involves: Electrical wires and cables, Electrical accessories, Ferrous metals, Power transmission and distribution networks, Aerospace electric equipment and systems, Products of non-ferrous metals, Characteristics and design of machines, apparatus, equipment, Conducting materials, Components and accessories for telecommunications equipment, Switchgear and controlgear, Telecommunication systems, Rotating machinery, Surface treatment and coating, Rails and railway components, Protection against crime, Linear and angular measurements, Materials for aerospace construction.

AR-IRAM, copper wire

HU-MSZT, copper wire

Standard Association of Australia （SAA）, copper wire

AS 1746:1991 Conductors - Bare overhead - Hard-drawn copper
AS 60947.7.1:2004 Low-voltage switchgear and controlgear - Ancillary equipment - Terminal blocks for copper conductors
AS 60947.7.2:2004 Low-voltage switchgear and controlgear - Ancillary equipment - Protective conductor terminal blocks for copper conductors

PL-PKN, copper wire

PN E90081-1974 Conduclors for overhead power ?ranjmis- sion purposes Copper conductors
PN E06150-71-1993 Low-voltage switchgear and controlgear. Ancillary equipment. Terminal blocks for copper conductors

German Institute for Standardization, copper wire

DIN 48072-2:1962 Line tapes for stranded copper conductors and solid ones
DIN 48203-1:1984 Copper wires and copper stranded conductors; technical delivery conditions
DIN 46227:1960 Cable clamp sockets for copper conductors
DIN 46267-1:1985 Non tension-proof compression joints for copper conductors
DIN 46220:1965 Cable sockets, hot pressed, cast for copper conductors
DIN 48085-1:1985 Full tension compression joints, for copper conductors, for overhead lines
DIN 46235:1983 Cable lugs; for compression connections, cover plate type, for copper conductors
DIN 47659:1975 Earthing connector for corrugated concentric copper-conductor up to 150 mm<(hoch)2>
DIN 46221:1965 Angle sockets, hot pressed, cast for copper conductors
DIN 29867:1979 Aerospace; wire single-conductor, copper, 600 V, 260 °C, technical specification
DIN 4000-10:1986 Tabular layouts of article characteristic for electrical cords, cables, wires and bunched enamelled copper wires
DIN 46234:1980 Terminal ends for solderless connections; ring type, without insulating sleeve, for copper conductors
DIN 46237:1970 Crimp-type cable sockets for solderless connections, insulated, for copper conductors
DIN 46230:1980 Terminal ends for solderless connections; pin type, without insulating sleeve, for copper conductors
DIN 46341-1:1977 Solderless connectors, without insulating sleeve, for copper conductors
DIN 46231:1970 Pin type cable-sockets for solderless connections, insulated, for copper conductors
DIN 48203-7:1984 Copper covered steel wires and copper covered steel stranded conductors; technical delivery conditions
DIN EN 13602:2002 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors; German version EN 13602:2002
DIN EN 13602:2013 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors; German version EN 13602:2013
DIN 29867:2014 Aerospace - Wire single-conductor, copper, 600 V, 260 °C - Technical specification; Inactive for new design
DIN EN 60947-7-1:2010 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (IEC 60947-7-1:2009); German version EN 60947-7-1:2009
DIN 9254-2:1986 Aerospace; single conductor wires, with copper conductor for connector boxes and equipment, 600 Volt, 200 C; technical specification
DIN EN 60947-7-2:2010 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors (IEC 60947-7-2:2009); German version EN 60947-7-2:2009
DIN EN 13603:2013 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2013
DIN 29896:1980 Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 150 and 260 °C, technical specification

Underwriters Laboratories (UL), copper wire

UL 486A-1991 Wire connectors and soldering lugs for use with copper conductors
UL 486A-1997 Wire connectors and soldering lugs for use with copper conductors
UL 486A BULLETIN-2001 UL Standard for Safety Wire Connectors and Soldering Lugs for Use with Copper Conductors
UL 486A BULLETIN-2000 UL Standard for Safety Wire Connectors and Soldering Lugs for Use with Copper Conductors
UL 486A BULLETIN-2002 UL Standard for Safety Wire Connectors and Soldering Lugs for Use with Copper Conductors
UL 60947-7-1-2004 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
UL 486A BULLETINS-2004 UL Standard for Safety Wire Connectors and Soldering Lugs for Use with Copper Conductors (03/24/2004 (2p); 01/20/2004 (2p))
UL 60947-7-2-2004 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 7-2: Ancillary Equipment Protective Conductor Terminal Blocks for Copper Conductors Second Edition

CZ-CSN, copper wire

CSN 37 0640 Z3-1997

Japanese Industrial Standards Committee (JISC), copper wire

JIS C 2805:2003 Crimp-type terminal lugs for copper conductors
JIS C 2806:2003 Non-insulated crimp-type sleeves for copper conductors
JIS C 2809:2014 Connecting devices -- Flat quick-connect terminations for electrical copper conductors -- Safety requirements
JIS C 8201-7-1:2010 Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors
JIS C 8201-7-1:2016 Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors

SE-SIS, copper wire

SIS SEN 24 01 02-1966 Bare copper wire for overhead power transmission purposes._____________

ES-AENOR, copper wire

UNE 20-630-1985

Association Francaise de Normalisation, copper wire

NF C20-110:1970 Insulated terminals for copper conductors. Requirements.
NF A51-111:2013 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
NF F55-681:1996 RAILWAY FIXED EQUIPMENT. ANNEALING COPPER BARE CONDUCTORS.
NF C63-065*NF EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1 : ancillary equipment - Terminal blocks for copper conductors
NF C20-115:1971 Terminals without screw clamping for connection of conductors for fixed wiring, with a nominal cross-section not exceedind 2,5 MM2, and without special preparation of the conductor.
NF A51-304:2011 Copper and copper alloys - Wire for general purposes.
NF C63-066*NF EN 60947-7-2:2009 Lowvoltage switchgear and controlgear - Part 7-2 : ancillary equipment - Protective conductor terminal blocks for copper conductors
NF C63-065:1993 Low-voltage switchgear and controlgear - Part 7 : ancillary equipment - Section one : terminal blocks for copper conductors.
NF C63-066:1996 Low-voltage switchgear and controlgear. Part 7 : ancillary equipment. Section 2 : protective conductor terminal blocks for copper conductors.

TH-TISI, copper wire

TIS 64-1974 Stanoard for hard drawn copper conductor for overhead lines

Korean Agency for Technology and Standards (KATS), copper wire

KS C 2620-2011(2021) Crimp-type terminal lugs for copper conductors
KS C 2621-1993 Non-insulated crimp-type sleeves for copper conductors
KS C IEC 60947-7-2:2021 Low-voltage switchgear and controlgear —Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors

American Society for Testing and Materials (ASTM), copper wire

ASTM B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
ASTM B173-01 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
ASTM B173-95 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
ASTM B173-01a Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
ASTM B172-01a Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B172-95 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B172-01 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B172-10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B172-10(2015) Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B174-10(2015) Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
ASTM B173-10(2015) Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
ASTM B174-02(2007)e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
ASTM B174-95 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
ASTM B174-10 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
ASTM B470-02(2012) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B286-07(2012) Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM B496-14 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B470-02 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B496-99 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B496-01 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B226-95(2003) Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
ASTM B226-95 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
ASTM B226-11(2021) Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
ASTM B226-11(2016) Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
ASTM B496-13 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B496-13a Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B286-95 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM B470-95 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B470-02(2017) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B173-10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
ASTM B787/B787M-00 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
ASTM B787/B787M-01 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
ASTM B496-04(2010)e1 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B496-16(2021) Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B738-03 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
ASTM B738-98 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
ASTM B738-03(2008) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
ASTM B738-13 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
ASTM B784-01(2006) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
ASTM B784-01 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM B784-00 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM B784-01(2012) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM B784-01(2017)e1 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM B8-11 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
ASTM B8-11(2017) Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
ASTM B8-99 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
ASTM B787/B787M-04(2009) Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
ASTM B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM B228-11 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM B228-98 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM B228-02 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM B452-93(1998)E1 Standard Specification for Copper-Clad Steel Wire for Electronic Application
ASTM B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application
ASTM B902-00 Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

British Standards Institution (BSI), copper wire

BS G 192:1965 Specification for Efglas type electric cables with copper conductors for aircraft
BS EN 60317-58:2010 Specifications for particular types of winding wires. Polyamide-imide enamelled rectangular copper wire, class 220
BS EN 60947-7-1:2002 Specification for low-voltage switchgear and controlgear - Ancillary equipment - Terminal blocks for copper conductors
BS EN 60947-7-2:2002 Specification for low-voltage switchgear and controlgear - Ancillary equipment - Protective conductor terminal blocks for copper conductors
BS 4087:1989 Specification for copper-covered steel wire for telephone and telegraph purposes
BS EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1:Ancillary equipment - Terminal blocks for copper conductors
BS EN 4681-002:2012 Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. General
BS EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2:Ancillary equipment - Protective conductor terminal blocks for copper conductors
BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard

NZ-SNZ, copper wire

NZSS 2206-1968 BARE HARD-DRAWN COPPER CONDUCTORS FOR OVERHEAD POWER LINES
NZS 1762:1963 NEW ZEALAND STANDARD SPECIFICATION FOR PVC-COVERED, HARD-DRAWN COPPER CONDUCTORS FOR OVERHEAD POWER LINES

AT-ON, copper wire

ONORM E 3800-1972 Round copper-wires for electrical purposes; exactly drawn
ONORM E 3803-1980 Winding wires jor electrical purpose round copper-wires, insulated, methods of tests

RO-ASRO, copper wire

STAS 4483/2-1980 Telecommunication cables RUBBER INSULATED GOPPER CABLES Dimensions
STAS 9293/1-1985 LUGS FOR COPPER CONDUCTORS General technical requirements
STAS 1368-1950
STAS 1596-1971 PRESSED OR CAST CABLE SOCKETS FOR COPPER MULTIPLE CONDUCTORS

RU-GOST R, copper wire

GOST 21428-1975 Enamelled copper round wires with temperature index 155. Specifications
GOST 7262-1978 Copper wires insulated by vanish VL-931. Specifications
GOST R 53405-2009 Copper cylinder wire. Specifications
GOST 4775-1991 Concentric-lay-stranded copper-clad steel (bimetallic) conductors. Specifications
GOST IEC 61210-2011 Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
GOST R 50030.7.1-2009 Low-voltage switchgear and controlgear. Part 7.1. Ancillary equipment. Terminal blocks for copper conductors
GOST R 50030.7.1-2000 Low-voltage switchgear and controlgear. Part 7. Ancillary equipment. Section 1. Terminal blocks for copper conductors
GOST R 50030.7.2-2009 Low-voltage switchgear and controlgear. Part 7.2. Ancillary equipment. Protective conductor terminal blocks for copper conductors
GOST R 50030.7.2-2000 Low-voltage switchgeal and controlgear. Part 7. Ancillary equipment. Section 2. Protective conductor terminal blocks for copper conductors
GOST 30011.7.1-2012 Low-voltage switchgear and controlgear. Part 7. Ancillary equipment. Section 1. Terminal blocks for copper conductors
GOST 30011.7.2-2012 Low-voltage switchgear and controlgear. Part 7. Ancillary equipment. Section 2. Protective conductor terminal blocks for copper conductors

ZA-SANS, copper wire

SANS 1803-1:2002 Lugs and ferrules for insulated electric cables Part 1: Copper conductors
SANS 1803-1:2009 Lugs and ferrules for insulated electric cables Part 1: Copper conductors
NRS 059-2002 Recommendations to minimize problems associated with the theft of transformer neutral and neutral earthing copper conductors

YU-JUS, copper wire

JUS N.E4.007-1987 Connecting devices. Screw-type termina/s for connecting copper conductors. Particular requirements
JUS N.E4.006-1987 Connecting devices. Screvvless termina/s for connecting copper conductors vvithout special preparation. Particular requirements

International Electrotechnical Commission (IEC), copper wire

IEC 61210:1993 Connecting devices; flat quick-connect terminations for electrical copper conductors; safety requirements
IEC 60317-58:2010 Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
IEC 60317-42:2010 Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200
IEC 60947-7-1:2002 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment; Terminal blocks for copper conductors
IEC 60947-7-1/COR1:2003 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment; Terminal blocks for copper conductors
IEC 60947-7-1:1999 Low-voltage switchgear and controlgear - Part 7: Ancillary equipment - Section 1: Terminal blocks for copper conductors
IEC 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
IEC TR 60344:2007 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide
IEC 60947-7-4:2019 RLV Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
IEC 60317-43:2010 Specification for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240
IEC 60947-7-4:2019 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
IEC 60317-44:2010 Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
IEC 60947-7-2:2002 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment; Protective conductor terminal blocks for copper conductors
IEC 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
IEC 60947-7-4:2013 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
IEC 60947-7-1:1989 Low-voltage switchgear and controlgear; part 7: ancillary equipment; section one: terminal blocks for copper conductors
IEC 60947-7-2:1995 Low-voltage switchgear and controlgear - Part 7: Ancillary equipment - Section 2: Protective conductor terminal blocks for copper conductors
IEC 60719:1992 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V

GOSTR, copper wire

GOST IEC 61210-2017 Connecting devices. Flat quick-connect clamps for copper electrical conductors. Safety requirement

American National Standards Institute （ANSI), copper wire

ANSI/ICEA S-84-608-2002 Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor – Technical Requirements
ANSI/ICEA S-84-608-2010 Telecommunications - Cable-Filled, Polyolefin-Insulated, Copper Conductor - Technical Requirements
ANSI/ICEA S-86-634-2011 Buried Telecommunications Wire, Filled, Polyolefin Insulated, Copper Conductor, Technical Requirements

Society of Automotive Engineers (SAE), copper wire

SAE AS22759/83-2000 Wire, electrical, polytetrafluoroethylene/polyimide insulated, normal weight, silver coated, copper conductor, 200°C, 600 volts
SAE AS22759/12-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/11-2000 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/6-2000 WIRE, ELECTRICAL, FLUOROCARBON-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/5-2000 Wire, Electrical, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Silver-Coated Copper Conductor, 600 Volt
SAE AS22759/92-2000 Wire, electrical, polytetrafluoroethylene/polyimide insulated, light weight, nickel coated, copper conductor, 260°C, 600 volts
SAE AS22759/91-2000 Wire, electrical, polytetrafluoroethylene/polyimide insulated, light weight, silver coated, copper conductor, 200°C, 600 volts
SAE AS22759/180-2010 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Light Weight, Tin-Coated Copper Conductor, 150°C, 600 Volts
SAE AS22759/1-2000 Wire, Electrical, Fluoropolymer-Insulated, PTFE and PTFE-Coated Glass, Silver-Coated Copper Conductor, 600-Volt
SAE AS22759/186-2010 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Normal Weight, Silver-coated Copper Conductor, 200°C, 600 Volts
SAE AS22759/84-2000 Wire, electrical, polytetrafluoroethylene/polyimide insulated, normal weight, nickel coated, copper conductor, 260°C, 600 volts
SAE AS22759/86-2000 Wire, electrical, polytetrafluoroethylene/polyimide insulated, normal weight, silver coated, copper conductor, 200°C, 600 volts
SAE AS22759/87-2000 Wire, electrical, polytetrafluoroethylene/polyimide insulated, normal weight, nickel coated, copper conductor, 260°C, 600 volts
SAE AS22759/180-2011 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Light Weight, Tin-Coated Copper Conductor, 150°C, 600 Volts
SAE AS22759/3-2000 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, TFE-GLASS-TFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS22759/80-2000 Wire, electrical, polytetrafluorethlene/polyimide insulated, light weight, tin coated, copper conductor, 150°C, 600 volts
SAE AS22759/87B-2007 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLTS
SAE AS22759/8-2000 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
SAE AMS2224F-1993 Tolerances, Copper and Copper Alloy Wire

未注明发布机构, copper wire

SAE AS22759/11A-2020 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT
BS 6926:1988(2000) Specification for Copper for electrical purposes : high conductivity copper wire rod

SAE - SAE International, copper wire

SAE AS22759/11A-2015 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT
SAE AS22759/84C-2015 Wire, electrical, polytetrafluoroethylene/polyimide insulated, normal weight, nickel coated, copper conductor, 260°C, 600 volts

(U.S.) Ford Automotive Standards, copper wire

FORD WSS-M1L123-A6-2008 CABLE, TIN PLATED COPPER CONDUCTOR, UN-INSULATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSA-M1L133-A1-2003 CABLE, LOW TENSION, MODIFIED POLYESTER INSULATED, COPPER AND TINNED COPPER CONDUCTOR ***TO BE USED WITH FORD WSS-M99P1111-A***

European Committee for Electrotechnical Standardization（CENELEC）, copper wire

EN 60317-58:2010 Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, copper wire

GB/T 17196-2017 Connecting devices—Flat quick-connect terminations for electrical copper conductors—Safety requirements

Insulated Cable Engineers Association （ICEA), copper wire

ICEA S-86-634-2011 Buried Telecommunications Wire Filled, Polyolefin Insulated, Copper Conductor Technical Requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, copper wire

GB/T 17196-1997 Connecting devices--Flat quick-connect terminations for electrical copper conductors--Safety requirements
GB 17196-1997 Connecting devices--Flat quick-connect terminations for electrical copper conductors--Safety requirements
GB 17464-1998 Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors

工业和信息化部, copper wire

JB/T 13371-2018 Technical conditions for rectangular silver-containing copper wires with unequal wall thickness in the air internally cooled generator rotor

Indonesia Standards, copper wire

SNI IEC 60947-7-1:2009 Low-voltage switchgear and controlgear. Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

CENELEC - European Committee for Electrotechnical Standardization, copper wire

EN 60947-7-1:2002 Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors
EN 60947-7-2:2002 Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
EN 60947-7-2:1995 Low-Voltage Switchgear and Controlgear Part 7: Ancillary Equipment Section 2: Protective Conductor Terminal Blocks for Copper Conductors

National Electrical Manufacturers Association（NEMA), copper wire

NEMA C119.6-2011 Electric Connectors - Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors

Danish Standards Foundation, copper wire

DS/EN 60947-7-1+Corr.:1994 Low-voltage switchgear and controlgear - Part 7: Ancillary equipment - Stection One:Terminal blocks for copper conductors

Group Standards of the People's Republic of China, copper wire

T/JX 059-2023 Copper-clad steel wire for grounding

KR-KS, copper wire

KS C IEC 60947-7-2-2021 Low-voltage switchgear and controlgear —Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors

PK-PSQCA, copper wire

PS 600-1978 SPECIFICATION FOR COPPER CADMIUM WIRE FOR TELEGRAPH AND TELEPHONE PURPOSES

NL-NEN, copper wire

NEN 10999-1993 Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors (IEC 999: 1990, modified)