ZH
RU
ES
differential pressure measurement
differential pressure measurement, Total:74 items.
In the international standard classification, differential pressure measurement involves: Measurement of force, weight and pressure, Measurement of fluid flow, Vacuum technology, Protection of and in buildings, Fluid power systems, Equipment for the chemical industry.
RU-GOST R, differential pressure measurement
- GOST 8.243-1977 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified mutual inductance output parameters of the SSI. Methods and means of verification
- GOST 8.240-1977 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified current output signals of the SSI. Methods and means of verification
- GOST 8.563.2-1997 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Measurement procedure by orifice instruments
- GOST 8.563.3-1997 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Procedure and module of calculations. Software
HU-MSZT, differential pressure measurement
German Institute for Standardization, differential pressure measurement
- DIN 19211:2004 Measurement of fluid flow by means of pressure differential devices - Condensation chambers
- DIN 19216:2017 Flow measurement - Mounting arrangements for flow measuring devices according to the differential pressure method
- DIN 19211:2004-02 Measurement of fluid flow by means of pressure differential devices - Condensation chambers
- DIN 19216:2017-10 Flow measurement - Mounting arrangements for flow measuring devices according to the differential pressure method
- DIN 19207:2004 Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories
- DIN 19207:2004-02 Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories
- DIN EN ISO 5167-2:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003); German version EN ISO 5167-2:2003
- DIN 19216:1995 Flow measurement - Installation layouts for differential pressure devices based on differential pressure method
- DIN EN ISO 5167-1:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, differential pressure measurement
- GB/T 25753.3-2011 Vacuum technology.Roots vacuum pump.Measurement of performance characteristics.Part 3:Measurement of overflow valve differential pressure
- GB/T 25753.1-2010 Vacuum technology.Roots vacuum pump.Measurement of performance characteristics.Part 1:Measurement of maximum tolerable differential pressure
- GB/T 8107-2012 Hydraulic fluid power.Valves.Determination of pressure differential/flow characteristics
- GB/Z 35588-2017 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
Japanese Industrial Standards Committee (JISC), differential pressure measurement
- JIS A 1417:1994 Method for field measurement of sound pressure level difference
- JIS Z 8762-2:2007 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 2: Orifice plates
- JIS Z 8762-4:2007 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 4: Venturi tubes
- JIS B 8386:2011 Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
- JIS Z 8762-1:2007 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 1: General principles and requirements
未注明发布机构, differential pressure measurement
- BS ISO/TR 15377:1998(1999) Measurement of fluid flow by means of pressure differential devices — Guidelines for specification of nozzles and orifice plates beyond
International Electrotechnical Commission (IEC), differential pressure measurement
- IEC 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa)
Korean Agency for Technology and Standards (KATS), differential pressure measurement
- KS B ISO 4411:2004 Hydraulic fluid power-Valves-Determination of pressure differential/flow characteristics
- KS B ISO 4411:2013 Hydraulic fluid power－Valves－Determination of pressure differential/flow characteristics
- KS B ISO 5167-2:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular-cross section conduits running full-Part 2:Orifice plates
- KS B ISO 5167-4:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 4:Venturi tubes
- KS B ISO 5167-4:2014 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes
- KS B ISO 5167-2:2014 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates
- KS B ISO TR 15377-2014(2019) Measurement of fluid flow by means of pressure-differential devices — Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167－1
- KS B ISO 5167-1:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 1:General principles and requirements
- KS B ISO 5167-1:2014 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
Danish Standards Foundation, differential pressure measurement
- DS/ISO 4411:1989 Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics
- DS/EN ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates
British Standards Institution (BSI), differential pressure measurement
- BS EN ISO 5167-4:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Venturi tubes
- BS EN ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Cone meters
- PD ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
- BS EN ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Orifice plates
- BS EN ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Nozzles and Venturi nozzles
- BS EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - General principles and requirements
- BS ISO 4411:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
- BS ISO 4411:2019 Hydraulic fluid power. Valves. Determination of differential pressure/flow rate characteristics
SAE - SAE International, differential pressure measurement
- SAE J3052-2017 Brake Hydraulic Component Flow Rate Measurement for High Differential Pressure (>5 bar)
API - American Petroleum Institute, differential pressure measurement
- API MPMS 22.4-2018 Manual of Petroleum Measurement Standards@ Chapter 22.4 Testing Protocol for Pressure@ Differential Pressure@ and Temperature Measuring Devices (FIRST EDITION)
- API MPMS 5.7-2003 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 7 - Testing Protocol for Differential Pressure Flow Measurement Devices
- API MPMS 22.2-2017 Manual of Petroleum Measurement Standards Chapter 22-Testing Protocol Section 2-Differential Pressure Flow Measurement Devices (SECOND EDITION)
European Committee for Standardization (CEN), differential pressure measurement
- EN ISO 5167-2:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2022)
- EN ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016)
- EN ISO 5167-5:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2022)
- EN ISO 5167-4:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2022)
- EN ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2022)
- EN ISO 5167-1:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2022)
International Organization for Standardization (ISO), differential pressure measurement
- ISO 4411:1986 Hydraulic fluid power; Valves; Determination of pressure differential/flow characteristics
- ISO 4411:2019 Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics
- ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters
- ISO 5167-2:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates
- ISO 4411:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
- ISO 5167-5:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
- ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
- ISO 5167-4:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes
- ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
- ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices - Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
Association Francaise de Normalisation, differential pressure measurement
- NF EN 61518:2001 Dimensions des raccords entre les instruments de mesure à différentiel de pression et les dispositifs d'arrêt sur bride allant jusqu'à 413 bar (41,3 MPa)
- NF E48-415:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics.
- NF ISO 4411:2020 Transmissions hydrauliques - Distributeurs - Détermination des caractéristiques de pression différentielle/débit
- NF X10-102-2*NF EN ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2 : orifice plates
- NF EN ISO 5167-3:2022 Mesurage du débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire - Partie 3 : Tuyères et Venturi-tuyères
- NF EN ISO 5167-6:2022 Mesurage de débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire - Partie 6 : débitmètres à coin
AT-ON, differential pressure measurement
Professional Standard - Chemical Industry, differential pressure measurement
- HG/T 21581-1995HK03 Pipeline Connection Installation Atlas of Flow Measurement Differential Pressure Transmitter
CEN - European Committee for Standardization, differential pressure measurement
- EN ISO 5167-1:1995 Measurement of Fluid Flow by Means of Pressure Differential Devices - Part 1: Orifice Plates@ Nozzles and Venturi Tubes Inserted in Circular Cross-Section Conduits Running Full
ES-AENOR, differential pressure measurement