ZH
RU
ES

iec+ power

iec+ power, Total:60 items.

In the international standard classification, iec+ power involves: Special measuring equipment for use in telecommunications, Fibre optic communications, Lamps and related equipment, Lighting, Electrical engineering in general, Capacitors, Industrial furnaces, Semiconductor devices, Applications of information technology, Integrated circuits. Microelectronics, Rectifiers. Convertors. Stabilized power supply, Solar energy engineering, Electromagnetic compatibility (EMC), Wind turbine systems and other alternative sources of energy, Electricity. Magnetism. Electrical and magnetic measurements.

European Committee for Electrotechnical Standardization（CENELEC）, iec+ power

EN 61315:2006 Calibration of Fibre Optic Power Meters
EN 61580-8:1996 Methods of Measurement for Waveguides Part 8: Waveguide Power Holding Capability
EN 61921:2003 Power capacitors Low-voltage power factor correction banks
EN 61523-1:2002 Delay and Power Calculation Standards Part 1: Integrated Circuit Delay and Power Calculation Systems
EN 61308:2006 High-Frequency Dielectric Heating Installations Test Methods for the Determination of Power Output
EN 61803:1999 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (Incorporating corrigendum October 1999; Incorporates Amendment A1: 2010)
EN 62132-4:2006 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz Part 4: Direct RF power injection method
EN 61922:2002 High-frequency induction heating installations - Test methods for the determination of power output of the generator

American National Standards Institute （ANSI), iec+ power

ANSI/TIA-455-231-2003 IEC 61315 - Calibration of Fibre-Optic Power Meters
ANSI/TIA-455-231-2015 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters

European Committee for Standardization (CEN), iec+ power

prEN 60143-1991 IEC 143 (third edition); series capacitors for power systems

Lithuanian Standards Office , iec+ power

LST EN 61315-2006 Calibration of fibre-optic power meters (IEC 61315:2005)
LST EN IEC 63103:2020 Lighting equipment - Non-active mode power measurement (IEC 63103:2020)
LST EN 61921-2004 Power capacitors. Low-voltage power factor correction banks (IEC 61921:2003)
LST EN 61290-1-3-2006 Optical amplifiers. Test methods. Part 1-3: Power and gain parameters. Optical power meter method (IEC 61290-1-3:2005)
LST EN IEC 61290-1-3:2021 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2021)
LST EN 60749-34-2011 Semiconductor devices - Mechanical and climatic test methods -- Part 34: Power cycling (IEC 60749-34:2010)
LST EN 61523-1-2003 Delay and power calculation standards. Part 1: Integrated circuit delay and power calculation systems (IEC 61523-1:2001)
LST EN IEC 61300-2-14:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power (IEC 61300-2-14:2021)
LST EN 61300-2-14-2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-14: Tests - High optical power (IEC 61300-2-14:2012)
LST EN IEC 61803:2021 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:2020)
LST EN 61308-2006 High-frequency dielectric heating installations - Test methods for the determination of power output (IEC 61308:2005)
LST EN 60747-15-2012 Semiconductor devices - Discrete devices -- Part 15: Isolated power semiconductor devices (IEC 60747-15:2010)
LST EN 61803-2001 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:1999)
LST EN 61400-12-1-2006 Wind turbines -- Part 12-1: Power performance measurements of electricity producing wind turbines (IEC 61400-12-1:2005)
LST EN 61290-7-1-2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method (IEC 61290-7-1:2007)
LST EN 61922-2003 High-frequency induction heating installations. Test methods for the determination of power output of the generator (IEC 61922:2002)

(U.S.) Telecommunications Industries Association , iec+ power

TIA-455-231-2003 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters
TIA-455-231-2015 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters

PL-PKN, iec+ power

PN-EN IEC 63103-2021-04 E Lighting equipment - Non-active mode power measurement (IEC 63103:2020)
PN-EN IEC 61803-2021-07 E Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:2020)

British Standards Institution (BSI), iec+ power

21/30410195 DC BS IEC 63288. Wireless Power Transfer. Measuring method for wireless power transfer efficiency and standby power. mobile phone (TA 15)
17/30370025 DC BS IEC 61123. Reliability testing. Compliance test plans for success ratio
18/30381547 DC BS EN IEC 63103. Lighting equipment. Non-active mode power measurement
19/30393688 DC BS EN IEC 63103. Lighting equipment. Non-active mode power measurement

German Institute for Standardization, iec+ power

DIN EN 61315:2006 Calibration of fibre-optic power meters (IEC 61315:2005); German version EN 61315:2006
DIN EN IEC 63103:2021 Lighting equipment - Non-active mode power measurement (IEC 63103:2020); German version EN IEC 63103:2020
DIN EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio (IEC 61290-3-3:2013); German version EN 61290-3-3:2014
DIN EN 61307:2012 Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2011); German version EN 61307:2011
DIN EN IEC 61290-1-3:2021-04 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 86C/1645/CD:2020); Text in German and English / Note: Date of issue 2021-03-05*Intended as replacement for DIN EN 61290-1-3 (2015-12).
DIN EN 61290-1-3:2006 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2005); German version EN 61290-1-3:2005
DIN EN 61580-8:1997-05 Methods of measurement for waveguides - Part 8: Waveguide power holding capability (IEC 61580-8:1996); German version EN 61580-8:1996
DIN EN IEC 61290-1:2023 Optical amplifiers - Test methods - Part 1: Power and gain parameters (IEC 86C/1746/CDV:2021); German and English version prEN IEC 61290-1:2021
DIN EN IEC 61803:2019 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 22F/514/CD:2018); Text in German and English
DIN EN IEC 61803:2021 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:2020); German version EN IEC 61803:2020
DIN EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (IEC 61290-1-3:2015); German version EN 61290-1-3:2015
DIN EN IEC 60393-4:2022 Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers (IEC 40/2919/CD:2022); Text in German and English
DIN EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating (IEC 61853-1:2011); German version EN 61853-1:2011
DIN EN 62670-3:2017 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating (IEC 62670-3:2017); German version EN 62670-3:2017
DIN EN 62132-4:2006 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method (IEC 62132-4:2006); German version EN 62132-4:2006
DIN EN 61308:2006 High-frequency dielectric heating installations - Test methods for the determination of power output (IEC 61308:2005); German version EN 61308:2006
DIN IEC 60115-4:1987-04 Fixed resistors for use in electronic equipment; sectional specification: fixed power resistors; identical with IEC 60115-4, edition 1982 / Note: To be replaced by DIN EN 60115-4 (2020-04).
DIN EN 60051-3:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 3: special requirements for wattmeters and varmeters (IEC 60051-3:1984, edition 4); german version EN 60051-3:1989
DIN EN 61922:2003-04 High-frequency induction heating installations - Test methods for the determination of power output of the generator (IEC 61922:2002); German version EN 61922:2002

AT-OVE/ON, iec+ power

OVE EN IEC 61169-1-6:2021 Radio frequency connectors - Part 1-6: Electrical test methods- RF power (IEC 46F/563/CDV) (english version)

AENOR, iec+ power

UNE-EN 61308:2006 High-frequency dielectric heating installations - Test methods for the determination of power output (IEC 61308:2005)
UNE-EN 61400-12-1:2007 Wind turbines -- Part 12-1: Power performance measurements of electricity producing wind turbines (IEC 61400-12-1:2005)

Institute of Electrical and Electronics Engineers (IEEE), iec+ power

IEC 61523-4:2023-10 (IEEE Std 1801-2018) IEEE/IEC International Standard--Delay and power calculation standards--Part 4: Design and Verification of Low-Power, Energy-Aware Electronic Systems
IEEE/IEC 61523-4-2023 IEEE/IEC International Standard--Delay and power calculation standards--Part 4: Design and Verification of Low-Power, Energy-Aware Electronic Systems

ES-UNE, iec+ power

UNE-EN 61290-7-1:2007 Optical amplifiers - Test methods -- Part 7-1: Out-of-band insertion losses - Filtered optical power meter method (IEC 61290-7-1:2007). (Endorsed by AENOR in October of 2007.)