ZH
RU
ES

flexural strength unit

flexural strength unit, Total:499 items.

In the international standard classification, flexural strength unit involves: Reinforced plastics, Footwear, Wood, sawlogs and sawn timber, Vibrations, shock and vibration measurements, Wood-based panels, Semi-manufactures of timber, Ceramics, Construction materials, Solar energy engineering, Rubber, Mining and quarrying, Measurement of force, weight and pressure, Glass, Aerospace fluid systems and components, Gears, Leather technology, Telecommunications in general, Refractories, Radiocommunications, Cellular materials, Paper and board, Kitchen equipment, Materials for aerospace construction, Medical equipment, Quantities and units, Protection of and in buildings, Materials for the reinforcement of composites, Plastics, Adhesives, Piezoelectric and dielectric devices, Structures of buildings, Elements of buildings, Inorganic chemicals, Powder metallurgy, Mechanical testing, Products of the textile industry, Technical drawings, Iron and steel products, Welding, brazing and soldering, Testing of metals, Seals, glands, Rubber and plastics products, Paints and varnishes, Electromechanical components for electronic and telecommunications equipment, Fluid power systems, Aerospace electric equipment and systems, Miscellaneous domestic and commercial equipment, Integrated circuits. Microelectronics, Earthworks. Excavations. Foundation construction. Underground works, Non-ferrous metals.

CZ-CSN, flexural strength unit

CSN ON 49 0193-1967 Bending strenght
CSN 49 0115-1976 Wood. Determination of ultimate strength in flexure tests
CSN 49 0117-1979 Wood. Impact strength in flexure
CSN 49 0115-1979 Wood. Determination of ultimate strength in flexure tests
CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination
CSN 73 1353-1976 Determiiiation of tensilo and flexui al strengths of cellular concreto

American Society for Testing and Materials (ASTM), flexural strength unit

ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
ASTM D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D3880-90(1999) Standard Test Method for Asbestos Strength Units
ASTM D3880-90(2004)e1 Standard Test Method for Asbestos Strength Units
ASTM D3880-90(2004) Standard Test Method for Asbestos Strength Units
ASTM D3880/D3880M-90(2017) Standard Test Method for Asbestos Strength Units
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D8388/D8388M-22 Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions
ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D3880/D3880M-90(2009)e1 Standard Test Method for Asbestos Strength Units
ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

(U.S.) Ford Automotive Standards, flexural strength unit

FORD FLTM BS 005-1-2000 FLEXURAL STRENGTH OF PAPER BOARD

Indonesia Standards, flexural strength unit

SNI 12-0565-1989 Bending strength test of shoes
SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending
SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)

AASHTO - American Association of State Highway and Transportation Officials, flexural strength unit

DIVISION I 9.17-1996 Flexural Strength (Interim 1997; Interim 1998)
T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T177-1997 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) (Twentieth Edition; ASTM C293-94)
T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure

SE-SIS, flexural strength unit

SIS SS 83 10 16-1989 Gutters - Determination of bending strength
SIS 23 51 06-1964 Fibre building boards. Determination of bending strength
SIS SS 13 73 08-1982 Autoclaved aerated concrete - Determination of bending strength

Taiwan Provincial Standard of the People's Republic of China, flexural strength unit

CNS 13976-1997 Method of test for flexural strength of dimensional stone
CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
CNS 14387-1999 Method of test for bending strength of fine ceramic joint
CNS 13382-19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 13382.19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 12701-1990 Method of Test for Flexural Strength ( Modulus of Rupture ) of High Performance Ceramics
CNS 13177-1993 Method of Test for Compressive Strength of Polyester Resin Concrete Using Portions of Beams Broken in Flexure

AENOR, flexural strength unit

UNE 83509:2004 CONCRETE WITH FIBERS. FLEXURE STRENGTH
UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 67037:1999 HOLLOW CLAY BLOCKS FOR FLOORS. FLEXURE STRENGHT TEST.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
UNE-EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
UNE 56537:1979 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF STRENGHT AGAINST STATIC FLEXION.
UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.

European Committee for Standardization (CEN), flexural strength unit

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
EN 1052-2:1999 Methods of Test for Masonry - Part 2: Determination of Flexural Strength
EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
FprEN 17468-2-2021 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
EN ISO 11984:1999 Ophthalmic Optics - Contact Lenses - Determination of Rigid Lens Flexure and Breakage ISO 11984: 1999
EN 12372:2006 Natural stone test methods - Determination of flexural strength under concentrated load
FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN 993-7:1998 Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures
EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions (Incorporates Amendment A1: 2013)
EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
EN 10268:1998 Cold-Rolled Flat Products Made of High Yield Strength Micro-Alloyed Steels for Cold Forming - General Delivery Conditions Ratified European Text
EN 1170-5:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
EN 1170-4:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass

Danish Standards Foundation, flexural strength unit

DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
DS/EN 12390-5:2013 Testing hardened concrete - Part 5: Flexural strength of test specimens
DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
DS/EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, ""Complete bending test"" method
DS/EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, ""Simplified bending test"" method
DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
DS 438.15:1984 Test method for the structural use of brickwork. Determination of the tensile strength in bending of brickwork
DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass

British Standards Institution (BSI), flexural strength unit

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS ISO 13765-4:2004 Refractory mortars - Determination of flexural bonding strength
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
BS EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
BS DD 86-1:1983 Damp-proof courses - Methods of test for flexural bond strength and short term shear strength
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS ISO 4604:2011 Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method
BS EN 12808-3:2008 Grouts for tiles - Determination of flexural and compressive strength
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
BS EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
BS EN 12390-5:2009 Testing hardened concrete Part 5: Flexural strength of test specimens
BS EN 12390-5:2019 Tracked Changes. Testing hardened concrete. Flexural strength of test specimens
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN 843-1:2007 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of flexural strength
BS EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
BS EN 12372:2006 Natural stone test methods — Determination of flexural strength under concentrated load
BS EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - 'Simplified bending test' method
BS EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength, "complete bending test" method
BS 3531-23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
BS ISO 6336-3:2019 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS EN 10268:2006+A1:2013 Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions
BS EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
21/30403937 DC BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
BS EN 2562:1997 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
BS EN 658-3:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength
BS EN 12372:2022 Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
BS ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength

RU-GOST R, flexural strength unit

GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending
GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST 16483.3-1984 Wood. Method of static bending strength determination
GOST ISO 13765-4-2017 Refractory mortars. Determination of flexural bonding strength
GOST 30271-1996 Paper and board. Determination of bending stiffness. Resonance method
GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
GOST ISO 9585-2011 Implants for surgery. Determination of bending strength and stiffness of bone plates
GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
GOST 26798.2-1996 I-G and I-H well cement. Test methods
GOST 20019-1974 Sintered hard metals. Determination of cross-bending strength
GOST 26798.2-1985 Oil-well cements. Test methods of strength limits in bending and compression
GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST 21554.3-1982 Sawn timber and blanks. Method for control of strength at bending, tension and compression
GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
GOST 27278-1987 Electromechanical radio components. Method of testing cable clamp strength to cable bending
GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
GOST 9625-1987 Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 31974-2012 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST ISO 3378-2014 Leather. Determination of resistance to cracking to grain layer of Flexural and tensile strength of the grain layer
GOST 15613.4-1978 Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending
GOST 23775-1979 Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
GOST R 57732-2017 Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
GOST 18228-1994 Sintered metal materials excluding hard metals. Determination of transverse rupture strength
GOST 28791-1990 Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing (dynamic method)
GOST 18228-1985 Powder metallurgy. Determination of bending strength limit

German Institute for Standardization, flexural strength unit

DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN EN 14617-2:2016-09 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN EN 1052-2:1999 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:1999
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 538:1994-11 Clay roofing tiles for discontinuous laying - Flexural strength test; German version EN 538:1994
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
DIN EN 12390-5:2019 Testing hardened concrete - Part 5: Flexural strength of test specimens
DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
DIN 53864:1978-08 Testing of textiles; determination of the bending strength, method according to Schlenker
DIN EN 1170-5:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
DIN EN 17468-1:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets; German and English version prEN 17468-1:2020
DIN EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
DIN EN 17468-2:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German and English version prEN 17468-2:2020
DIN EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
DIN EN 843-1:2008-08 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:2006
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
DIN EN 12390-5:2019-10 Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2019
DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN 53390:1988 Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars
DIN EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000
DIN EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:2016
DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002

Lithuanian Standards Office , flexural strength unit

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 538-2000 Clay roofing tiles for discontinuous laying - Flexural strength test
LST EN 12390-5-2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods
LST EN 1170-5-2003 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
LST EN 1170-4-2000 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load
LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass

国家市场监督管理总局、中国国家标准化管理委员会, flexural strength unit

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 37781-2019 Test methods for bending strength of glass
GB/T 14230-2021 Test method of tooth bending strength for gear load capacity

Association Francaise de Normalisation, flexural strength unit

NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF EN ISO 5402-2:2018 Cuir - Détermination de la résistance à la flexion - Partie 2 : méthode de flexion d'empeigne
NF EN ISO 3327:2009 Métaux-durs - Détermination de la résistance à la flexion
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN ISO 17707:2005 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion
NF EN ISO 5402-1:2022 Cuir - Détermination de la résistance à la flexion - Partie 1 : méthode au flexomètre
NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF EN ISO 10545-4:2019 Carreaux et dalles céramiques - Partie 4 : détermination de la résistance à la flexion et de la force de rupture
NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
NF B51-008:1987 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF P19-105*NF EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete.
NF EN ISO 17694:2016 Chaussures - Méthodes d'essai pour les tiges et les doublures - Résistance à la flexion
NF EN 12384:1999 Cuivre et alliages de cuivre - Détermination de la limite élastique en flexion de bande.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
NF P18-430-5:2012 Testing hardened concrete - Part 5 : flexural strength of test specimens.
NF P12-702-2*NF EN 1052-2:2016 Methods of test for masonry - Part 2 : determination of flexural strength
NF P12-106*NF EN 772-6:2002 Methods of test for masonry units - Part 6 : determination of bending tensile strength of aggregate concrete masonry units
NF ISO 2493-2:2020 Papier et carton - Détermination de la résistance à la flexion - Partie 2 : rigidimètre Taber
NF ISO 4666-4:2018 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 4 : flexomètre à contrainte constante
NF P19-829-5*NF EN 1170-5:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, ""Complete bending test"" method.".
NF E04-707-3:1994 Mechanical pencils. Part 3 : black leads. Bending strengths of hb leads.
NF EN 13161:2008 Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant
NF T48-108:1994 Asbestos and rubber compressed sheets for seals. Determination of bending resistance.
NF ISO 4666-3:2023 Caoutchouc vulcanisé - Détermination de l'élévation de température et de la résistance à la fatigue dans les essais aux flexomètres - Partie 3 : flexomètre à compression (type à déformation constante)
NF P33-402-2*NF EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2 : profiled sheets
NF EN 14651+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF EN 14651/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF EN 843-1:2007 Céramiques techniques avancées - Propriétés mécaniques des céramiques monolithiques à température ambiante - Partie 1 : détermination de la résistance à la flexion
NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
NF EN 14617-2:2016 Pierre agglomérée - Méthodes d'essai - Partie 2 : détermination de la résistance à la flexion (traction)
NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
NF P61-611-3*NF EN 12808-3:2009 Grouts for tiles - Part 3 : determination of flexural and compressive strength
NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF P78-344*NF EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass
NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
NF T57-160-2*NF ISO 3597-2:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2 : determination of flexural strength.
NF ISO 22389-2:2020 Structures en bois - Résistance à la flexion des poutres en I - Partie 2 : performances des composants et exigences de production
NF EN 13892-2:2003 Méthodes d'essai des matériaux pour chapes - Partie 2 : détermination de la résistance à la flexion et à la compression

未注明发布机构, flexural strength unit

BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS 1881-118:1983(1998) Testing concrete — Part 118 : Method for determination of flexural strength
BS EN 2562:1997(1999) Carbonfibre reinforced plastics — Unidirectional laminates — Flexural test parallel to the fibre direction
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
DIN EN ISO 17138:2022 High-performance ceramics – Mechanical properties of ceramic composite materials at room temperature – Determination of flexural strength

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, flexural strength unit

GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 14230-1993 Standard of test methed for bending load capacity of gears
GB 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
GB/T 4741-1999 Standard test method for bending strength of ceramic materials
GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 3356-1999 Test method for flexural properties of unidirectional fiber reinforced plastics
GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
GB/T 14390-2008 Fine ceramics (advanced ceramics,advanced technical ceramics).Test methos for flexural strength of monolithic ceramics at elevated temperature
GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 42667-2023 Test method for iso-biaxial bending strength of fine ceramics at room temperature Double ring method
GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
GB/T 39011.3-2020 Mechanical pencils for technical drawings-Part 3: Black leads-Bending strengths of HB leads
GB/T 39542.3-2020 Mechanical pencils for technical drawings—Part 3:Black leads—Bending strengths of HB leads
GB/T 42895-2023 Bending strength test method of microelectromechanical system (MEMS) technology silicon-based MEMS microstructure
GB/T 7689.4-2001 Reinforcements--Test method for woven fabrics Part 4: Determination of flexural stiffness
GB/T 14208-1993 Textile glass--Rovings--Determination of flexural strength of rod composites
GB/T 10062.3-2003 Calculation of load capacity of bevel gear--Part 3:Calculation of tooth root strength
GB/T 7689.4-2013 Reinforcements.Test method for woven fabrics.Part 4: Determination of flexural stiffness

ESDU - Engineering Sciences Data Unit, flexural strength unit

ESDU 71027 A-2013 Endurance of high strength steels (in bending)
ESDU 71027 A-1974 Endurance of high strength steels (in bending).
ESDU 90002 C-2001 Struts: strength under flexural@ local and inter-rivet buckling.
ESDU 90002 B-1994 STRUTS: STRENGTH UNDER FLEXURAL@ LOCAL AND INTER-RIVET BUCKLING
ESDU 81007-1981 Fatigue strength in bending of steel I-beams with welded attachments.
ESDU 81007-2013 Fatigue strength in bending of steel I-beams with welded attachments
ESDU 78023 A-2013 Fatigue strength of transverse fillet welded joints and attachments in steels under bending loading
ESDU 78023 A-1982 Fatigue strength of transverse welded joints and attachments in steels under bending loading.
ESDU 85004-1985 Fatigue strength of steel stud threads under axial and combined axial and bending loading.
ESDU 72016 C-1990 Natural frequencies of flat or singly-curved sandwich panels with cores of zero flexural stiffness.

RO-ASRO, flexural strength unit

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 9966-1974 HARDBOARD Determination of static bending slrength
STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
STAS 4740-1989 Board and paperboard BENDING RESISTANCE DETERMI- NATION OF LOAD AND BENDING ANGLE
STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
STAS 12824-1990 SHAPED REFRACTORY PRODUCTS Strength determination at thermal shock-bending
STAS 11175-1978 Refractory mortars with chemical bindings DETERMINATION OF FRACTURE STRENGTH AT JOINT BENDING
STAS 6084-1985 FINISHED LEATHERS Strength determination at repeated flexion of leather and coating
STAS 7157-1978 FIBERBOARDS HARDBOARDS Determination of strength and elasticity modulus at static bending
STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending

AT-ON, flexural strength unit

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM B 4650 Teil.7-1980 Steel structures; buckling of spherical Shells
ONORM B 4650 Teil.4-1977 Steel structures; buckling of circular cylindrical Shells
ONORM B 4650 Teil.5-1980 Steel structures; buckling of circular cylindrical Shells with gradually varying thickness
OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load

Group Standards of the People's Republic of China, flexural strength unit

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen

TR-TSE, flexural strength unit

TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2477-1976 Wood - Determination of Impact Bending Strength
TS 3287-1979 STANDARD METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE

Professional Standard - Chemical Industry, flexural strength unit

HG/T 3844-2008 Ebonite.Determination of cross breaking strength

Society of Automotive Engineers (SAE), flexural strength unit

SAE AIR1418A-2013 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418-2011 FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS
SAE AIR1418B-2020 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418A-1996 Flexure Fatigue Strength of Tube Fitting Joints
SAE TS356-1-1987 TS356 Test for Electrical Connectors Contact Bending Strength
SAE AMS3777/9B-1995 Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 3000 (13,345 N) Breaking Strength
SAE AIR1418A-1980 Flexure Fatigue Strength of Tube Fitting Joints R(2001)
SAE AMS3372A-1988 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
SAE AMS3372B-2012 Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure
SAE J2613-2002 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE AMS4908F-1988 Titanium Alloy Sheet and Strip, 8Mn, Annealed, 110 ksi (760 MPa) Yield Strength
SAE AMS6386C-2000 Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength
SAE J2833-2009 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
SAE J2832-2009 Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Double Flaring
SAE J2614-2009 Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring
SAE J2613-2009 Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending

CL-INN, flexural strength unit

INDITECNOR 2.4-13ch-1948

Standard Association of Australia （SAA）, flexural strength unit

AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.10(Int):2001 Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70 degrees Celsius or boiling temperature

IPC - Association Connecting Electronics Industries, flexural strength unit

IPC TM-650 2.4.4B-1994 Flexural Strength of Laminates (at Ambient Temperature)
IPC TM-650 2.4.4.1A-1994 Flexural Strength of Laminates (at Elevated Temperature)

Korean Agency for Technology and Standards (KATS), flexural strength unit

KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
KS P ISO 9585:2010 Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585-2010(2016) Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585:2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS G ISO 9177-3:2002 Mechanical pencils-Part 3:Black leads-Bending strengths of HB leads
KS M ISO 15108:2009 Adhesives－Determination of strength of bonded joints using a bending-shear method
KS F 2232-2016 Testing method for bending strength of polystyrene composite wood wool cement boards
KS G ISO 9177-3:2014 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS G ISO 9177-3:2017 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS B ISO 11984:2014 Ophthalmic optics — Contact lenses — Determination of rigid lens flexure and breakage
KS B ISO 11984:2005 Ophthalmic optics-Contact lenses-Determination of rigid lens flexure and breakage
KS M ISO 15108-2009(2019) Adhesives－Determination of strength of bonded joints using a bending-shear method
KS A ISO 9177-3:2002 Mechanical pencils－Part 3：Black leads－Bending strengths of HB leads
KS G ISO 9177-3-2017(2022) Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS F 2413-1995 Testing method for compressive strength of concrete using portions of beams broken in flexure
KS F 2413-2015 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS F 2326-2002(2017) Testing method for compressive strength of soil－cement using portions of beam broken in flexure
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 3597-2:2012 Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
KS M ISO 3597-2-2012(2017) Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength

International Organization for Standardization (ISO), flexural strength unit

ISO 3348:1975 Wood; Determination of impact bending strength
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 5402-2:2015 Leather - Determination of flex resistance - Part 2: Vamp flex method
ISO 9585:1990 Implants for surgery; determination of bending strength and stiffness of bone plates
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 4604:2011 Reinforcement fabrics - Determination of conventional flexural stiffness - Fixed-angle flexometer method
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 15108:1998 Adhesives - Determination of strength of bonded joints using a bending-shear method
ISO/R 87:1959 Simple bend testing of steel sheet and strip less than 3 mm thick
ISO 9177-3:1994 Mechanical pencils - Part 3: Black leads - Bending strengths of HB leads
ISO 11984:1999 Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 22389-1:2010 Timber structures - Bending strength of I-beams - Part 1: Testing, evaluation and characterization
ISO 3597-2:1993 Textile-glass-reinforced plastics; determination of mechanical properties on rods made of roving-reinforced resin; part 2: determination of flexural strength
ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength

PL-PKN, flexural strength unit

PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus
PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne

Japanese Industrial Standards Committee (JISC), flexural strength unit

JIS A 1106:1993 Method of test for flexural strength of concrete
JIS R 1664:2004 Testing method for bending strength of porous fine ceramics
JIS R 1624:1995 Testing method for bending strength of fine ceramic joint
JIS B 1759:2013 Estimation of tooth bending strength of cylindrical plastic gears
JIS R 1624:2010 Testing method for bending strength of fine ceramic joint
JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
JIS K 7096:2017 Test method for through-thickness tensile properties of carbon fibre reinforced plastics -- Flexure method
JIS A 1114:1993 Method of test for compressive strength of concrete using portions of beams broken in flexure
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature

Professional Standard - Building Materials, flexural strength unit

JC/T 676-1997 Test method for flexure of glass material
JC/T 263-1993 Performance test method for cast stone products. Bending strength test

International Telecommunication Union (ITU), flexural strength unit

ITU-R V.665-2015 Traffic intensity unit
ITU-R V.665-2-2000 Traffic Intensity Unit
ITU-T B.18-1993 Traffic Intensity Unit
ITU-T B.18 (REV 1)-1993 Traffic Intensity Unit (Study Group II) 3 pp
ITU-T B.18 FRENCH-1993 Traffic Intensity Unit Study Group II
ITU-T B.18 SPANISH-1993 Traffic Intensity Unit Study Group II

Professional Standard - Automobile, flexural strength unit

QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, flexural strength unit

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

American Gear Manufacturers Association, flexural strength unit

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
AGMA 2003-C10-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
AGMA 2003-B97-1997 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel, and Spiral Bevel Gear Teeth

AGMA - American Gear Manufacturers Association, flexural strength unit

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
P229.24-1982 Improvement in the Conventional Analysis of Gear Tooth Bending Fatigue Strength
91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods
13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue

VN-TCVN, flexural strength unit

TCVN 4032-1985 Cements.Test methods of bending and compression strengths
TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

Professional Standard - Aerospace, flexural strength unit

QJ 2199-1991 Test method for flexural strength of rigid foamed plastics

TH-TISI, flexural strength unit

TIS 1683-1998 Implants for surgery.determination of bending strength and stiffness of bone plates

KR-KS, flexural strength unit

KS P ISO 9585-2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS A ISO 9177-3-2002 Mechanical pencils－Part 3：Black leads－Bending strengths of HB leads
KS G ISO 9177-3-2017 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS F 2326-2022 Test method for compressive strength of soil cement using portions of beam broken in flexure

American Society of Mechanical Engineers (ASME), flexural strength unit

ASME SI-2-1976 SI units in strength of materials

ES-UNE, flexural strength unit

UNE-EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNE-EN 772-6:2002 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units.
UNE-EN 12390-5:2020 Testing hardened concrete - Part 5: Flexural strength of test specimens
UNE-EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load

ZA-SANS, flexural strength unit

SANS 5864:2006 Concrete tests - Flexural strength of hardened concrete
SANS 9177-3:2009 Mechanical pencils Part 3: Black leads - Bending strengths of HB leads

API - American Petroleum Institute, flexural strength unit

API BULL 5C4-1987 Bulletin on Round Thread Casing Joint Strength with Combined Internal Pressure and Bending
API BULL 5C4-1972 BULLETIN ON ROUND THREAD CASING JOINT STRENGTH WITH COMBINED INTERNAL PRESSURE AND BENDING FIRST EDITION

Professional Standard - Aviation, flexural strength unit

HB/Z 89.3-1985 Calculation of Bending Fatigue Strength of Aviation Bevel Gear Tooth
HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes
HB/Z 84.3-1984 Bending Fatigue Strength Calculation of Aviation Involute Cylindrical Gear Teeth
HB 5295-1984 Kiscc test method for cantilever-bending pre-cracked specimens of high-strength alloys
HB 5434.6-2004 Test methods for aircraft wheel friction materials-Part 6:Test method for bend strength

Professional Standard - Medicine, flexural strength unit

YY/T 0342-2002 Implants for surgery----Determination of bending strength and stiffness of bone plates

国家药监局, flexural strength unit

YY/T 0342-2020 Implants for surgery----Determination of bending strength and stiffness of bone plates

The American Road & Transportation Builders Association, flexural strength unit

AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
AASHTO T 140-1997(R2009) Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure

GM North America, flexural strength unit

GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus

YU-JUS, flexural strength unit

JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending

HU-MSZT, flexural strength unit

MSZ 105/22-1979

CEN - European Committee for Standardization, flexural strength unit

PREN 12390-5-2017 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN 12372:1999 Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Load
EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

Guangdong Provincial Standard of the People's Republic of China, flexural strength unit

DB44/T 1100.2-2012 Test methods for artificial stone: Part 2 Determination of bending strength

SAE - SAE International, flexural strength unit

SAE J2613-2017 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE J2833-2018 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
SAE J2832-2019 Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Double Flaring

NZ-SNZ, flexural strength unit

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

Association of German Mechanical Engineers, flexural strength unit

DVS 2203-1 Beiblatt 3-2003 Testing of welded joints of thermoplastics sheet and pipes - Requirements - Technological bend test; Bend angle/ram displacement

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, flexural strength unit

GB/T 35160.2-2017 Test methods for agglomerated stone—Part 2：Determination of flexural strength

National Aeronautics and Space Administration (NASA), flexural strength unit

NASA NACA-RB-L4D29-1944 Some strength tests of stiffened curved sheets loaded in shear

工业和信息化部, flexural strength unit

JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature
JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

European Association of Aerospace Industries, flexural strength unit

AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1

IN-BIS, flexural strength unit

(U.S.) Telecommunications Industries Association , flexural strength unit

TIA TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

TIA - Telecommunications Industry Association, flexural strength unit

TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

Aerospace, Security and Defence Industries Association of Europe (ASD), flexural strength unit

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

PT-IPQ, flexural strength unit

NP EN 1170-4-2000 Precast concrete products. Test method for glass-fibre reinforced cement Part 4:Measuring bending strength,"Simplified bending test"method

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, flexural strength unit

ITU-R V.665-1-1990 Traffic Intensity Unit - Section C - Other Means of Expression

PK-PSQCA, flexural strength unit

PS 532-1965 SIMPLE BEND TESTING OF STEEL SHEET AND STRIPLESS THAN 3mm THICK (18")