ZH
RU
ES

Partially anisotropic Partially isotropic

Partially anisotropic Partially isotropic, Total:90 items.

In the international standard classification, Partially anisotropic Partially isotropic involves: Reinforced plastics, Plastics, Adhesives, Iron and steel products, Water quality, Geology. Meteorology. Hydrology, Mining equipment.


VN-TCVN, Partially anisotropic Partially isotropic

  • TCVN 4501-4-2009 Plastics.Determination of tensile properties.Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

Danish Standards Foundation, Partially anisotropic Partially isotropic

  • DS/EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  • DS/EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

Association Francaise de Normalisation, Partially anisotropic Partially isotropic

  • NF T51-034-4*NF EN ISO 527-4:2021 Plastics - Determination of tensile properties - Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  • NF EN ISO 527-4:2023 Plastiques - Détermination des propriétés en traction - Partie 4 : conditions d'essai pour les composites plastiques renforcés de fibres isotropes et orthotropes
  • NF T51-034-4:1997 Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.
  • NF ISO 16525-3:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 3 : détermination des propriétés de transfert de chaleur
  • NF T76-100-3*NF ISO 16525-3:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 3 : determination of heat-transfer properties
  • NF ISO 16525-1:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 1 : méthodes d'essai générales
  • NF ISO 16525-7:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 7 : méthodes d'essai environnemental
  • NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
  • NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
  • NF T76-100-1*NF ISO 16525-1:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 1 : general test methods
  • NF T76-100-7*NF ISO 16525-7:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 7 : environmental test methods
  • NF ISO 16525-5:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 5 : détermination de la fatigue par cisaillement
  • NF ISO 16525-9:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 9 : détermination des propriétés de transmission de signal à haute vitesse
  • NF T51-294-5*NF EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5 : preparation of standard specimens for investigating anisotropy
  • NF ISO 16525-6:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 6 : détermination de la résistance au choc du type pendule
  • NF T76-100-9*NF ISO 16525-9:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9 : determination of high-speed signal-transmission characteristics
  • NF T76-100-5*NF ISO 16525-5:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 5 : determination of shear fatigue
  • NF ISO 16525-8:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 8 : méthodes d'essai de migration électrochimique
  • NF T76-100-8*NF ISO 16525-8:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 8 : electrochemical-migration test methods
  • NF ISO 16525-2:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 2 : détermination des propriétés électriques pour utilisation dans des assemblages électroniques
  • NF T76-100-6*NF ISO 16525-6:2014 Adhesives - Test methods for electrically isotropic conductive adhesives - Part 6 : determination pendulum-type shear impact
  • NF T76-100-2*NF ISO 16525-2:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 2 : determination of electrical characteristics for use in electronic assemblies
  • NF ISO 16525-4:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 4 : détermination de la résistance au cisaillement et de la résistance électrique des assemblages collés rigide sur rigide
  • NF T76-100-4*NF ISO 16525-4:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 4 : determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Partially anisotropic Partially isotropic

  • GB/T 1040.4-2006 Plastics. Determination of tensile properties. Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  • GB/T 20564.5-2010 Continuously cold rolled high strength steel sheet and strip for automobile.Part 5:Isotropic steel
  • GB/T 20564.5-2022 Continuously cold rolled high strength steel sheet and strip for automobile—Part 5: Isotropic steel

ES-UNE, Partially anisotropic Partially isotropic

  • UNE-EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021, Corrected version 2022-02)
  • UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)

AENOR, Partially anisotropic Partially isotropic

  • UNE-EN ISO 527-4:1997 PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES (ISO 527-4:1997).
  • UNE-EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011)

German Institute for Standardization, Partially anisotropic Partially isotropic

  • DIN EN ISO 527-4:2023-07 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023); German version EN ISO 527-4:2023
  • DIN EN ISO 527-4:2022 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021)
  • DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
  • DIN EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
  • DIN EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011); German version EN ISO 294-5:2013

British Standards Institution (BSI), Partially anisotropic Partially isotropic

  • 20/30409900 DC BS EN ISO 527-4. Plastics. Determination of tensile properties. Part 4. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

ESDU - Engineering Sciences Data Unit, Partially anisotropic Partially isotropic

  • ESDU 02009-2011 Sound radiation from orthotropic rectangular plates Part I: Estimation by asymptotic method
  • ESDU 02009-2002 Sound radiation from orthotropic rectangular plates. Part I: estimation by asymptotic method.
  • ESDU 93011-1994 Flat rectangular orthotropic plates under uniformly distributed normal pressure. Elastic stresses and deflections for various forms of edge restraint.
  • ESDU 73007 A-1983 Stiffness of loaded flat strips under sinusoidally distributed bending couples at their edges (for use in local buckling calculations). (Uniaxial or biaxial loading. Isotropic or orthotropic materials.)
  • ESDU 81018 B-1992 Natural frequencies of thick-walled isotropic circular-cylindrical shells (shear diaphragm end conditions).
  • ESDU 81018 B-2011 Natural frequencies of thick-walled isotropic circular-cylindrical shells (shear diaphragm end conditions)
  • ESDU 81018 B-2012 Natural frequencies of thick-walled isotropic circular-cylindrical shells (shear diaphragm end conditions)
  • ESDU 94033-1994 Flat rectangular isotropic plates under uniformly distributed normal pressure. Elastic deflections@ stresses and strains@ moments and forces@ for various forms of edge restraint.
  • TM 71-1990 A Rayleigh-Ritz method of analysis for vibration of orthotropic plates under static in-plane loading (including shear)
  • ESDU 02010-2002 Sound radiation from orthotropic rectangular plates. Part II: validation by comparison with numerical and experimental results.
  • ESDU 85001 D-1995 Elastic stress and strain distributions around circular holes in infinite plates of orthotropic material (applicable to fibre reinforced composites).
  • ESDU 73015 A-1975 Estimation of the local buckling stress under biaxial compression of an isotropic skin with fibre reinforced integral unflanged stiffeners.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Partially anisotropic Partially isotropic

  • GB/T 35494.1-2017 Test methods for isotropic electrically conductive adhesives—Part 1:General test methods

Japanese Industrial Standards Committee (JISC), Partially anisotropic Partially isotropic

  • JIS K 7164:2005 Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  • JIS K 7080-2:2012 Carbon fiber reinforced plastics -- Testing methods for bearing strength -- Part 2: Orthotropic and Quasi-isotropic long fiber laminates

Korean Agency for Technology and Standards (KATS), Partially anisotropic Partially isotropic

  • KS M ISO 527-4-2002(2022) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
  • KS M ISO 527-4-2002(2017) Platics－Determination of tensile properties－Part 4：Test conditions for isotropic and orthotropic fibre－reinforced plastic composites
  • KS C IEC 60404-6-2015(2020) Magnetic materials－Part 6：Methods ofmeasurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4

International Organization for Standardization (ISO), Partially anisotropic Partially isotropic

  • ISO 527-4:2023 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  • ISO 527-4:2021 Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  • ISO 16525-3:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 3: Determination of heat-transfer properties
  • ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 16525-1:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 1: General test methods
  • ISO 16525-7:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 7: Environmental test methods
  • ISO 16525-9:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9: Determination of high-speed signal-transmission characteristics
  • ISO 16525-5:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 5: Determination of shear fatigue
  • ISO 16525-8:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 8: Electrochemical-migration test methods
  • ISO 294-5:2001/Cor 1:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Technical Corrigendum 1
  • ISO 294-5:2001/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Amendment 1
  • ISO 16525-6:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 6: Determination of pendulum-type shear impact
  • ISO 16525-2:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 2: Determination of electrical characteristics for use in electronic assemblies
  • ISO 16525-4:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies

European Committee for Standardization (CEN), Partially anisotropic Partially isotropic

  • prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
  • EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
  • FprCEN/TS 1993-1-901 CEN/TS 1993-1-901 Eurocode 3 — Design of steel structures — Part 1-901: Fatigue design of orthotropic bridge decks with the hot spot stress method

国家市场监督管理总局、中国国家标准化管理委员会, Partially anisotropic Partially isotropic

  • GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy

未注明发布机构, Partially anisotropic Partially isotropic

  • BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy

American Society for Testing and Materials (ASTM), Partially anisotropic Partially isotropic

  • ASTM D5850-20 Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
  • ASTM D5850-18 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
  • ASTM D5920-96 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
  • ASTM D5920-96(2005) Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
  • ASTM D5920/D5920M-20 Standard Practice for (Analytical Procedure) Tests of Anisotropic Unconfined Aquifers by Neuman Method
  • ASTM D5850-95(2000) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
  • ASTM D5850-95(2006) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
  • ASTM D5850-95(2012) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

The American Road & Transportation Builders Association, Partially anisotropic Partially isotropic

  • AASHTO DIVISION I 10.41 Orthotropic-Deck Superstructures Interim 2000(Standard Specifications for Highway Bridges, Div. 1 - Design)

Lithuanian Standards Office , Partially anisotropic Partially isotropic

  • LST EN ISO 527-4:2000 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997)

  Partially anisotropic Partially isotropic.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved